* src/frontends/qt4/GuiFontLoader.{cpp,h}
(GuiFontLoader::GuiFontLoader): don't store font IDs anymore,
as we are not going to clean up after ourselves.
(GuiFontLoader::~GuiFontLoader): make it virtual again and
do nothing (avoids a crash with fontconfig < 2.2.92).
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@20246 a592a061-630c-0410-9148-cb99ea01b6c8
- Format incremented to 284
- LaTeX-package wrapfig is now used instead of flotflt for wrap floats (this allows us to implement now also a table wrap float)
(the optional overhang argument of wrapfig will be implemented later)
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@20185 a592a061-630c-0410-9148-cb99ea01b6c8
xft-fonts package is still required. However, on *nix there seem
to be no way to tell fontconfig to prefer our fonts instead of
others matching the requirements, so, in case of conflict, the
fontconfig files should be manually adjusted, or some existing
font package used (note that the quality of the bakoma fonts is
better than that of the xft ones). There is no such problem on
Windows where our private fonts are always preferred over the
installed ones (and I hope the same holds true for Mac).
* src/LyX.cpp
(LyX::exec): don't call addFontResources() and restoreFontResources()
anymore, as the frontend code will do the job.
* src/frontends/qt4/GuiFontLoader.{cpp,h}
(GuiFontLoader::GuiFontLoader): register math fonts with Qt.
(GuiFontLoader::~GuiFontLoader): unregister math fonts.
* src/support/os.h
* src/support/os_unix.cpp
* src/support/os_win32.cpp
* src/support/os_cygwin.cpp:
remove code dealing with fonts.
* configure.ac: don't check for fontconfig headers anymore.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@20128 a592a061-630c-0410-9148-cb99ea01b6c8
- column and row count,
- tabular width and method that goes with it
- method declaration without implementation: void delete_column(col_type)
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@20032 a592a061-630c-0410-9148-cb99ea01b6c8
That makes another simplification both possible and desirable. For some reason, whenever you change the Document Class combobox in Document Settings, LyX tries to read whatever you choose _before_ you try to hit "Apply". Why? I see no good reason. You get the warning earlier that way, but maybe you weren't going to try to load it anyway and were going to change your mind. So I have removed that behavior, in which case you'll get the warning when you try to apply the parameters. This means we can also remove ControlDocument::loadTextclass().
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@19965 a592a061-630c-0410-9148-cb99ea01b6c8
* WorkArea::dispatch(): replace the redraw() call with a Buffer::changed() signal emission in order to update all views of the Buffer, even though some view won't need the redraw...
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@19867 a592a061-630c-0410-9148-cb99ea01b6c8
Design goal: Allow the use of layout "modules", which are to LaTeX packages as layout files are to LaTeX document classes. Thus, one could have a module that defined certain character styles, environments, commands, or what have you, and include it in various documents, each of which uses a different document class, without having to modify the layout files themselves. For example, a theorems.module could be used with article.layout to provide support for theorem-type environments, without having to modify article.layout itself, and the same module could be used with book.layout, etc.
This third patch just re-factors some code presently in QCitation*. (It also incorporates some bug fixes that have been committed separately.) We're going to use essentially the same set of widgets for choosing modules that is used for choosing citation keys, so we pull the controlling logic out into a new class, QSelectionManager. I did not make this a QWidget. That seemed to me to be overkill, and it would have made things much more complicated, I think...and I'm not all that experienced with Qt, anyway. Anyone who wants to do that is of course welcome.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@19860 a592a061-630c-0410-9148-cb99ea01b6c8
When opening another document, the following is printed to the console:
QWidget::repaint: recursive repaint detected.
QPixmap::operator=: Cannot assign to pixmap during painting
Painter must be active to set rendering hints
[repeated many times here]
Painter must be active to set rendering hints
QPainter:🔚 Painter is not active, aborted
QPixmap::operator=: Cannot assign to pixmap during painting
QPixmap::operator=: Cannot assign to pixmap during painting
currentTabChanged 1File/c/work/file2.lyx
and, when closing LyX:
QPixmap::operator=: Cannot assign to pixmap during painting
QPaintDevice: Cannot destroy paint device that is being painted. Be sure to QPainter::end() painters!
I suspect that solving these issues might also solve the missing close
tab button problem.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@19783 a592a061-630c-0410-9148-cb99ea01b6c8
* Toolbar::focusCommandBuffer(): new pure virtual method.
* Toolbars::display(): now return the address of the found toolbar.
* GuiView: get rid of command_buffer_, transferred to QLToolbar.
* QCommandBuffer: replace focus_command with setFocusProxy on edit_;
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@19767 a592a061-630c-0410-9148-cb99ea01b6c8
Design goal: Allow the use of layout "modules", which are to LaTeX packages as layout files are to LaTeX document classes. Thus, one could have a module that defined certain character styles, environments, commands, or what have you, and include it in various documents, each of which uses a different document class, without having to modify the layout files themselves. For example, a theorems.module could be used with article.layout to provide support for theorem-type environments, without having to modify article.layout itself, and the same module could be used with book.layout, etc.
This first patch does some reworking of the infrastructrue. We need to distinguish between the TextClass that a particular document is using and the layout of that document, since modules, in particular, can modify the layout. The solution adopted here is to add a TextClass pointer to BufferParams, which will hold the layout. The layout itself is then constructed from the TextClass the document is using. At present, this is completely trivial, but that will change when modules are added.
The pointer in question is a boost::shared_ptr. This is needed because CutAndPaste saves a copy of the layout with each cut or copied selection. We cannot assume the selection vanishes when the document is closed, so there are two options: (i) keep a list of all the layouts that have ever been used by any document; (ii) used some kind of smart pointer. The latter seems preferable, as the former would waste memory. More importantly, the use of a smart pointer allows modules to be modified on disk and then reloaded while LyX is running, and it will eventually allow the same for layout files.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@19756 a592a061-630c-0410-9148-cb99ea01b6c8
* LyXView:
- getToolbars(): deleted.
- toolbars_: now protected. The goal is to transfer that to GuiView.
- openLayoutList(): new method. The core should not know how this list is displayed.
- showMiniBuffer(): new pure virtual method to show the mini-buffer.
- focus_command_buffer: deleted.
* GuiView:
- focus_command_widget(): deleted.
- showMiniBuffer(): implemented.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@19748 a592a061-630c-0410-9148-cb99ea01b6c8
* BufferView::moveToPosition()
- now only return success boolean
- now schedule a screen centering
- now set the current font to the new position.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@19722 a592a061-630c-0410-9148-cb99ea01b6c8
* loadLyXFile::setBuffer(): get rid of a premature optimisation, we make sure that everything is properly drawn in any case.
* GuiView::setCurrentWorkArea(): make sure everything is updated if we don't change tab.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@19717 a592a061-630c-0410-9148-cb99ea01b6c8
- setBuffer(): LyXView has no business in setting parent document.
- loadLyXFile(): delete dead code.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@19703 a592a061-630c-0410-9148-cb99ea01b6c8
* Buffer:
- get rid of cursor_ and anchor_
- ~Buffer(): update the labels of its master buffer before closing
- closing(): pass the Buffer address.
* BufferView():
- BufferView(): needs a valid Buffer (should be const in the future.
- most of the change is about removing all test of buffer_ nullity.
- resize(): deleted.
- setBuffer(): deleted.
* Application:
- newLyXView(): simplification
- updated design description in Application.h
* Gui/GuiImplementation: remove all WorkAreas and BufferView creation/Deletion. Workareas are directly handled by LyXView/GuiView and BufferView is created/delete by WorkArea.
* LyXView/GuiView: implement the new design
What is not working yet:
- the close tab button: it is implemented but does not show up.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@19686 a592a061-630c-0410-9148-cb99ea01b6c8
The changes are essentially of three types.
First, the std::maps previously used here for storing BibTeX data have become full-fledged classes and so what were previously just a bunch of functions have now become methods of these new classes. This leads to a lot of minor changes in other files, to adapt to the new signature. The changes in insets/ are mostly of this kind.
Second, there are some slightly more substantial changes in src/insets/InsetBibtex.cpp. We now store lists of the field names and entry types that have been used.
Finally, there are the changes to the citation UI. These are mostly straightforward, though adding the new functionality exposed some inadequacies in the previous code that also had to be fixed.
One other change: BibTeX keys are now docstring. This solves some Unicode issues.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@19657 a592a061-630c-0410-9148-cb99ea01b6c8
http://bugzilla.lyx.org/show_bug.cgi?id=4123
* GuiView:
- closeEvent(): set quitting=true only when quitting. I don't know why and how this was changed but it was clearly wrong.
- update_view_state_qt(): only update when focus is in. Make sure this is the current LyXView.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@19643 a592a061-630c-0410-9148-cb99ea01b6c8
a structure representing field->value instead of just a single string with
all the data. The data structures are defined in src/Biblio_typedefs.h, and
the main changes are to the parser code in src/insets/InsetBibtex.cpp.
-src/Biblio_typedefs.h
Contains typedefs for new representation. Separating them out limits how much
gets #include'd by other files, and also resolves a circularity problem with
Buffer.h.
-src/Biblio.{h,cpp}
Signature changes and massive simplifications to routines that report
BibTeX data, since we now have an articulate representation.
-src/insets/InsetBibtex.{h,cpp}
Re-write the parser code so we store a key->value map of the BibTeX data
rather than just one long string. This is the main work.
-src/frontends/controllers/ControlCitation.{h,cpp}
-src/insets/InsetBibitem.{h,cpp}
-src/insets/InsetCitation.cpp
Adaptations and simplifications.
-src/insets/Inset.h
-src/Buffer.{h,cpp}
-src/insets/InsetInclude.{h,cpp}
Signature changes.
-src/Makefile.am
-development/scons/scons_manifest.py
Add src/Biblio_typedefs.h
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@19598 a592a061-630c-0410-9148-cb99ea01b6c8
information is acquired. This involves (i) moving the bulk of fillWithBibKeys()
into Biblio.cpp, (ii) introducing a virtual method Inset::fillWithBibKeys() that,
by default, does nothing, and (iii) over-riding this method in the insets that do
need to do something.
This is all preparatory for a more substantial re-working of the BibTex code,
which should follow shortly.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@19565 a592a061-630c-0410-9148-cb99ea01b6c8
that caused the bug, but it does.
Also fix some other UI bugs, relating to resets of the selection models. These
look gratuitous and cause problems in the current code.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@19530 a592a061-630c-0410-9148-cb99ea01b6c8
- reorganize the code to minimize indentation by returning early for special cases
- use a pixmap cache for word drawing. This can be disabled by setting USE_PIXMAP_CACHE to 0 at the top of QLPainter.cpp.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@19513 a592a061-630c-0410-9148-cb99ea01b6c8
in the view source panel
* Buffer.cpp (getSourceCode, writeLaTeXSource): fix sync between output and texrow
* frontends/controllers/ControlViewSource.{h,cpp} (getRows): new method to get the current selection in term of latex rows
* frontends/qt4/QViewSource.{h,cpp}: make a selection in the ViewSource widget
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@19503 a592a061-630c-0410-9148-cb99ea01b6c8
* development/MacOSX/Makefile.am: when installing, create bogus
language directories to allow translation through Qt.
* src/frontends/qt4/GuiApplication.cpp (MenuTranslator): new class,
redirects some Qt translation requests to gettext.
(GuiApplication): install the MenuTranslator.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@19354 a592a061-630c-0410-9148-cb99ea01b6c8
The effect is this: If you try to open a file that is already open,
LyX (i) checks if the buffer is dirty, and just switches buffers if
it is not; (ii) if it is, you get this message:
The document %1$s is already loaded and has unsaved changes.
Do you want to abandon your changes and reload the document?
[Reload] [Keep Changes]
If you hit the latter, you just get switched to the document.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@19331 a592a061-630c-0410-9148-cb99ea01b6c8
- new function getSortedColors
* src/frontends/qt4/QPrefs.cpp:
- use that to sort the colors (bug 2571)
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@19236 a592a061-630c-0410-9148-cb99ea01b6c8
* InsetTabular:
- remove the is_deleted_ boolean
- dispatch(): remove the call to updateDialog at the end
* ControlTabular::initialiseParams(): connect to the current tabular if found.
* QTabular::update_contents(): initialiseParams() each time.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@19112 a592a061-630c-0410-9148-cb99ea01b6c8
1) LyXFunc::lyx_view_ is not set to 0
2) quiting is not set to true.
This patch add safe guards when closing a view and/or exiting.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@19095 a592a061-630c-0410-9148-cb99ea01b6c8
1) create a doc
2) insert an ert inset
3) right-click the inset
4) new window
5) delete the ert inset: BOOM!
This commit replace the static hideDialog signal which was in effect shared by all views with a direct call to Dialog::hide().
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@19094 a592a061-630c-0410-9148-cb99ea01b6c8
* Layout.h:
- name_, obsoleted_by_, depends_on_ are now docstrings.
All other changes results from the above string -> docstring changes. In particular, we now try to translate the layout names only if possible (i.e. if they are ASCII only).
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@19042 a592a061-630c-0410-9148-cb99ea01b6c8
- don't try to trim after a dot that is the last character in the name
(fixes crash, bug 3981)
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@18992 a592a061-630c-0410-9148-cb99ea01b6c8
* src/support/docstring.{cpp,h}:
- rename normalize_kc to normalize_c and use normalization form C (instead of KC)
* src/callback.cpp:
* src/Trans.cpp:
* src/frontends/qt4/GuiClipboard.cpp:
* src/frontends/qt4/GuiSelection.cpp:
* lib/lyx2lyx/lyx_1_5.py:
- use normalization forms C and D instead of KC and KD.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@18991 a592a061-630c-0410-9148-cb99ea01b6c8
* frontend_helpers.cpp (Sorter): use the current locale for sorting
(bug 2739)
* frontend_helpers.cpp: cleanup headers.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@18988 a592a061-630c-0410-9148-cb99ea01b6c8
- new boolean canApplyToReadonly that allows to apply params/update view
even if the buffer is readOnly for specific dialogs.
* src/frontends/controllers/ControlPrint.h:
- use that (fix bug 3909)
* src/frontends/controllers/ControlViewSource:
- dto. (fix bug 3943)
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@18959 a592a061-630c-0410-9148-cb99ea01b6c8
1. Open a document with child documents, each comprising divisions;
2. Show the outline pane. You can see childs' divisions;
3. Select (view) one of the childs;
4. Close this child doc. The focus comes back to the master doc;
5. Click in the outline pane at some point corresponding to the child doc you closed. LyX crashes with SIGSEGV (instead of reopening the child...).
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@18939 a592a061-630c-0410-9148-cb99ea01b6c8
LyXFunc.cpp
Quote file paths in printer dialog
Fix bug 3915: http://bugzilla.lyx.org/show_bug.cgi?id=3915
(patch from Jürgen and JMarc)
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@18934 a592a061-630c-0410-9148-cb99ea01b6c8
is that we distinguish between the "Default" alignment and whatever
that default happens to be: I.e., so far as the code goes, the UI now
distinguishes LYX_ALIGN_LAYOUT from LYX_ALIGN_WHATEVER, when WHATEVER
happens to be the default. So you can explicitly force, say, left-align,
and that will stick between document classes.
* src/Paragraph.cpp:
Don't output params if alignment is the default.
* src/ParagraphParameters.cpp
Treat LYX_ALIGN_LAYOUT as its own alignment.
* src/Text2.cpp
Treat LYX_ALIGN_LAYOUT as its own alignment, and force it to be accepted
as a possible alignment.
* src/frontends/controllers/ControlParagraph.{h,cpp}
New method haveMultiParSelection().
*src/frontends/qt4/QParagraph.{h,cpp}
*src/frontends/qt4/ui/ParagraphUi.ui
UI adjustments as mentioned.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@18922 a592a061-630c-0410-9148-cb99ea01b6c8
- use internal_path to prevent assert on windows (bug 3916).
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@18896 a592a061-630c-0410-9148-cb99ea01b6c8
* po/lyx_pot.py:
- new function external_l10n: parse external_templates and extract the relevant parts for translation.
* development/scons/SConstruct:
* po/Makefile.in.in:
- use external_l10n
* src/insets/InsetExternal.cpp:
* src/frontends/qt4/QExternal.cpp:
- make eveything translatable
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@18866 a592a061-630c-0410-9148-cb99ea01b6c8
checkbox has been changed to a radio button, so that other alignments
can be chosen without the user's having to uncheck "Default".
There was some disagreement about the interface here. See, for example,
this thread:
http://www.mail-archive.com/lyx-devel@lists.lyx.org/msg121328.html
For now, this will do.
The interface here is not fully functional. At present, if the Default
happens to be Justified, then checking Justified is simply equivalent to
checking Default. This is due to the behavior of Text::setParagraph(), and
it should be changed if this interface is retained.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@18860 a592a061-630c-0410-9148-cb99ea01b6c8
does not close the command completion popup. Moreover setFocus does
not focus the widget correctly, probably because the popup widget
behavior is different. An activateWindow solves the problem by
selecting the LyX view again as active window.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@18840 a592a061-630c-0410-9148-cb99ea01b6c8
* LyXView::setBuffer(): update labels and toc only if we change parents.
* LyXView::loadLyXFile():
- update labels in _any_ case and before setting the Buffer.
- update GUI controls in case we move to a saved position.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@18829 a592a061-630c-0410-9148-cb99ea01b6c8
* buffer_funcs.{h,cpp}: new checkAndLoadLyXFile() transferred from BufferView::loadLyXFile().
* BufferView::loadLyXFile(): deleted.
* LyXView::loadLyXFile(): simplify logic and fix some issues:
- buggy child document leads to crash due to error list dialog.
- ensure that we switch to buffer if there's some errors.
- use LyXView::setBuffer() instead of repeating code.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@18828 a592a061-630c-0410-9148-cb99ea01b6c8
Fix Bug 3860: Toc crash when loading a child documents.
* BufferView::loadLyXFile(): simplify, transfer last part to
LyXView::loadLyXFile().
Change return value to Buffer created by load (or 0 if none).
Ultimately, this should all be moved to buffer_funcs.cpp, as it is no
longer needed here.
* Buffer::setParentName(): small fix to avoid recursive includes.
* LyXView:
- setBuffer(): properly update the labels and the Toc if this is [LOAD Child
Document] command. Move buffer connection and disconnection, simplifying
earlier code.
- loadLyXFile(): get some code from BufferView::loadLyXFile() and from
LyXFunc::LFUN_BUFFER_CHILD_OPEN, properly handle the child document case.
There's a lot of overlap with setBuffer() here. This needs cleaning.
* LyXFunc: add optional argument to LFUN_BUFFER_CHILD_OPEN to indicate if
the document is being opened by LyX itself rather than the user (as on
View>DVI, for example).
* LyX: adapt to loadLyXFile() API changes.
* insets/InsetInclude: use LFUN_BUFFER_CHILD_OPEN rather than calling
loadLyXFile() directly. Make use of new optional argument.
With this in place, the only thing missing for proper multipart document support is to automatically update the parent Buffer when switching from the parent Buffer. This would be very useful when you work with multiple document sharing the same child documents (as I often do).
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@18825 a592a061-630c-0410-9148-cb99ea01b6c8
the coordinate cache of the math inset is not valid and InsetMathNest
depends on that to compute the cursor position.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@18816 a592a061-630c-0410-9148-cb99ea01b6c8
IconPalette now subclasses QWidgetAction so that we can
insert them in QMenu (before we were painting ourselves)
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@18812 a592a061-630c-0410-9148-cb99ea01b6c8
* remove spacing in the layout of the tab bar and the central widget
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@18770 a592a061-630c-0410-9148-cb99ea01b6c8
this is already what we have; fixes a crash (bug 3793)
* src/frontends/controllers/ControlToc.h: make getGUIName private
* src/frontends/controllers/ControlToc.cpp (getGUIName): handle
correctly the lists of floats.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@18648 a592a061-630c-0410-9148-cb99ea01b6c8
bug is fixed in Qt an upper version bound should be added.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@18647 a592a061-630c-0410-9148-cb99ea01b6c8
* In the "Available" list, double clicking or hitting Enter adds a
citation. Hitting Ctrl-Enter adds the citation and closes the
dialog. Previously, Enter did what Ctrl-Enter now does if there
was no other citation already selected and double clicking would
close the dialog after adding the citation.
* In the "Selected" list, Delete and Backspace delete the
selection.
Ctrl-Delete and Ctrl-Backspace clear the whole list.
Thanks to Abdel, Andre, and Lars for comments and help.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@18633 a592a061-630c-0410-9148-cb99ea01b6c8
http://bugzilla.lyx.org/show_bug.cgi?id=3759
It also simplifies and fix the smallcaps case which was not correct WRT unicode. Even though I don't know if toUpper() means something in the non ucs2 range.
FYI, I used toqstr() to do the ucs4 -> ucs2 conversion when needed. This helper method works only with Qt >= 4.2.
* GuiFontMetrics::smallcapsWidth(): changed to work with single ucs4 characters.
* GuiFontMetrics::xxx(): make sure that font metrics works with characters not in the ucs2 range.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@18593 a592a061-630c-0410-9148-cb99ea01b6c8
* added Qt::Drawer flag to TOC
* reverted Jürgen's patch (i.e. the source view is docked below the text again),
wide drawers are not Mac-like (tm)
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@18557 a592a061-630c-0410-9148-cb99ea01b6c8
* Inset: new destroyed signal (copy ctor and operator= needed because of a signal is not copiable)
* CursorSlice:
- connect to inset destructor wherever possible
- invalidate(), isValid(): new method.
- inset_: now private
* DocIterator::fixIfBroken(): new method for properly fixing cursors.
* StableDocIterator::asDocIterator(): verify cursor sanity before creating it.
* Cursor::fixIfBroken(): now a simple wrapper around DocIterator::fixIfBroken()
* BufferView::setBuffer(): verify cursor sanity before restoring it.
* WorkArea::redraw(): verify cursor sanity of concurrent BufferView display.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@18516 a592a061-630c-0410-9148-cb99ea01b6c8
