(InsetTabular::doDispatch): Don't reset the table paste buffer
when pasting from the external clipboard or selection, since no
paste operation should ever change any clipboard.
At the same time make the code more readable by removing the
fall-through.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@16492 a592a061-630c-0410-9148-cb99ea01b6c8
* LyXText
- bv(), bv_owner, : deleted.
- These methods now need a (Buffer const &) argument: getFont(), applyOuterFont(), getLayoutFont(), getLabelFont(), setCharFont(), setLayout(), singleWidth(), leftMargin(), rightMargin(), computeRowMetrics(), isMainText(), spacing(), isRTL(), cursorX(), rowBreakPoint(), setRowWidth(), labelFill(), labelEnd().
- These methods now need a (BufferView const &) argument and are propably candidates for future removal when 1.6 is opened for development: redoParagraph(), x2pos(), getRowNearY(), getColumnNearX(), checkInsetHit(), setHeightOfRow().
- recUndo(): now need a LCursor argument.
* CoordCache::get(LyXText const *, pit_type):
- now const.
- use const_iterator instead of iterator.
* FontIterator:
- add (Buffer const &) argument to ctor
- buffer_: new const reference to applicable BufferView.
* InsetBase
- xo(), yo(), covers() and neverIndent() are now const.
* InsetText::setViewCache(): deleted
All other changes are due to the LyXText and InsetBase API changes.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15618 a592a061-630c-0410-9148-cb99ea01b6c8
* Painter: new ctor that sets drawing_enabled_ to true.
* setDrawingEnabled(), isDrawingEnabled(): new methods.
* QLPainter.C: only draw if drawing is enabled.
* nullpainter.h: deleted.
* rawpainter.C::paintPar(): only draw if we are inside the Paragraph.
* InsetTabular::draw(): use new Painter method instead of a NullPainter.
* InsetMathNest::drawSelection(): ditto.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15613 a592a061-630c-0410-9148-cb99ea01b6c8
* src/*.C:
* src/insets/*.C: implement rejectChanges() in analogy to
acceptChanges();
* src/paragraph_pimpl.C: add assertions for pos, start, and
end parameters
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15542 a592a061-630c-0410-9148-cb99ea01b6c8
I believe that it is for horizontal
"scrolling": If you have a table that is wider than the screen and you go
to a cell that is at the right edge then, if you are lucky, the table is
shifted to the left so that you can edit the cell and even go further
right. This does however not work reliably.
If I am right then the variable name scx_ would make some sense: sc for
scrolling. The ChangeLog comments also seem to point in this direction. And
most of them were done by Jürgen Vigna who is AFAIK in Denmark.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15414 a592a061-630c-0410-9148-cb99ea01b6c8
Known problems:
- No space is output after a \hfill. I probably broke this with the
InsetCommand patch. I'll have a look later.
- Although the encoding is now UTF8 the arguments of the inputenc package
are still the old ones, so LaTeX will not run.
- Labels and references with non-ASCII characters are broken. This needs to
be fixed in lyx::support::escape(), but this is a file format change.
- Something seems to be wrong with index entries, but this is probably also
due to the InsetCommand changes.
Have fun!
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15378 a592a061-630c-0410-9148-cb99ea01b6c8
CoordCache & coord_cache = sl.text()->bv()->coordCache();
As you can see, I used this indirection to access the BufferView::CoordCache(). Bad luck, the passed CursorSlice was not completely valid inside a mathed inset, hence the crash. My solution is to pass BufferView to InsetBase::cursorPos() and all its derivative.
* InsetBase::cursorPos(): pass BufferView const &
* bufferview_funcs::coordOffset(): ditto.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15356 a592a061-630c-0410-9148-cb99ea01b6c8
theCoords is now a thing of the past and all CoordCache accesses are done via BufferView::coordCache() now. I had to modify a number of methods to pass BufferView.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15324 a592a061-630c-0410-9148-cb99ea01b6c8
export (e.g. the ToC) and the navigate menu.
* src/insets/insetbase.h
(InsetBase::plaintext): output to a docstream
(InsetBase::textString): ditto
* src/mathed/TextPainter.h
(TextPainter::show): ditto
* src/support/docstream.[Ch] New file and string streams for
docstring. The file streams convert to UTF8 on the fly.
* many more files: Adjust to the changes above
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15301 a592a061-630c-0410-9148-cb99ea01b6c8
* lyxfunc.h:
- theLyXFunc(): new function in the global namespace.
- lyx::dispatch(): new function in the lyx namespace.
- lyx::getStatus(): new function in the lyx namespace.
* bufferlist.h:
- theBufferList(): new function in the global namespace.
* Clipboard.h:
- theClipboard(): new function in the global namespace.
* Selection.h:
- theSelection(): new function in the global namespace.
* FontLoader.h:
- theFontLoader(): new function in the global namespace.
* FontMetrics.h:
- theFontMetrics(LyXFont const &): new function in the global namespace.
* Application.C: implements the functions defined above.
* LyXView.h:
- getLyXFunc(): deleted.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15298 a592a061-630c-0410-9148-cb99ea01b6c8
Basically, I replaced all methods in the font_metrics namespace by a proper virtual interface FontMetrics. The FontLoader is _the_ container for FontMetrics.
This patch should also bring some optimizations in a number of place in the code. This is because we do not need any more to search for the LyXFont at each font_metrics call. In effect, the speed advantage is not as sensible and this is a bit deceiving considering that this was my primary motivation behind the patch. But I like the patch anyway as it cleans up the relation and interfacing between fonts, metrics and frontends.
* frontends/FontMetrics.h: new virtual interface. Renamed from font_metrics.h
* qt4/GuiFontMetrics: corresponding qt4 implememtation. Renamed from qfont_metrics.C. The smallCaps particular case treatment has been transfered here as well as the width cache for MacOSX and Windows.
* qt4/QLPainter.C: the smallCapsText has been reworked to return the width of the drawn text.C
all other files: replace font_metric helper function call with corresponding FontMetrics method calls.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15265 a592a061-630c-0410-9148-cb99ea01b6c8
* rename output_changes to outputChanges
* rename tracking_changes to trackChanges
* add FIXMEs for later revision
* remove trackChanges(); the CT data structure will always be set up
* decouple LFUNs changes-output/change-accept/change-reject/
all-changes-accept/all-changes-reject from LFUN changes-track
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15261 a592a061-630c-0410-9148-cb99ea01b6c8
* src/insets/insettabular.C
(InsetTabular::getStatus): enable COPY_ROW and COPY_COLUMN features
(InsetTabular::tabularFeatures): handle COPY_ROW and COPY_COLUMN
* src/tabular.h
(TabularFeature): add COPY_ROW and COPY_COLUMN
* src/tabular.[Ch]
(LyXTabular::copyRow): new method, copy a row
(LyXTabular::copyColumn): new method, copy a column
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15173 a592a061-630c-0410-9148-cb99ea01b6c8
* BufferView
- layoutChanged: new boost signal.
- LyXView owner(), owner_: deleted
* text3.C
- emit BufferView::layoutChanged instead of calling LyXView::setLayout directly
- LFUN_MOUSE_RELEASE: delete LyXView updateMenubar() and updateToolbars() direct calls.
The update is of both bars is done in WorkArea::dispatch().
* WorkArea.C
- dispatch(): add LyXView updateMenubar() call.
* LyXView
- connects to BufferView::layoutChanged directly to Toolbars::setLayout()
- setLayout(): deleted.
* qt4/GuiImplementation: modify BufferView construction (without LyXView).
All other files: cleanup header declaration of LyXView.h
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15153 a592a061-630c-0410-9148-cb99ea01b6c8
* src/CutAndPaste.C (pasteSelectionHelper): pass Cursor
as argument, remove cursor-dependent arguments,
implement method to reset layout in insets which
forceParagraphsToDefault.
* src/CutAndPaste.C (pasteParagraphList): adapt call of
pasteSelectionHelper.
* insets/insetbox.C (doDispatch):
* insets/insetert.C (doDispatch):
* insets/insetcharstyle.C (doDispatch):
* insettext.[Ch] (forceParagraphsToDefault):
remove ad-hoc-Code to
reset paragraph layout.
This is now done generally in CutAndPaste.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15062 a592a061-630c-0410-9148-cb99ea01b6c8
* src/insets/insettabular.C (getStatus):
* src/insets/insettext.C (doDispatch,getStatus): remove special code
for LFUN_INSET_DISSOLVE.
* src/text.C (dissolveInset): new method.
(erase, backspace): use dissolveInset.
* src/text3.C (dispatch): use dissolveInset for LFUN_INSET_DISSOLVE.
(getStatus): disable LFUN_INSET_DISSOLVE if the inset has more than one cell.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@14940 a592a061-630c-0410-9148-cb99ea01b6c8
* src/frontends/qt[34]/qt_helpers.[Ch]
(toqstr): add variant for docstring
(qstring_to_ucs4): Use docstring and port from qt4 to qt3
* Many other files: Many std::string -> lyx::docstring conversions
* src/support/lstrings.[Ch]
(subst): Add variant for docstring and char_type
(externalLineEnding): std::string -> lyx::docstring
(internalLineEnding): std::string -> lyx::docstring
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@14871 a592a061-630c-0410-9148-cb99ea01b6c8
* src/support/docstring.[Ch]
(from_ascii): new conversion function
(from_utf8): new conversion function
(to_utf8): new conversion function
(operator==) new, compare docstring and ASCII C string
(operator!=) new, compare docstring and ASCII C string
* src/support/Makefile.am: add new file docstring.C
* development/scons/scons_manifest.py: ditto
* src/funcrequest.[Ch]
(argument): change name to argument_ and type to docstring,
add an accessor
(FuncRequest): Add two new constructors taking a docstring argument
* all other files: adjust to the FuncRequest changes above
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@14861 a592a061-630c-0410-9148-cb99ea01b6c8
* src/LyXAction.C
(LyXAction::init): handle new LFUN_CLIPBOARD_PASTE
* src/insets/insettabular.C
(InsetTabular::doDispatch): ditto
* src/insets/insetbox.C
(InsetBox::doDispatch): ditto
* src/insets/insetert.C
(InsetERT::doDispatch): ditto
(InsetERT::getStatus): ditto
* src/insets/insetcharstyle.C
(InsetCharStyle::doDispatch): ditto
* src/BufferView_pimpl.C
(BufferView::Pimpl::selectionRequest): stuff selection, not clipboard
* src/mathed/math_nestinset.C
(MathNestInset::lfunMousePress): get stuff selection, not clipboard
(MathNestInset::lfunMouseRelease): clipboard -> selection in
commented code
* src/CutAndPaste.C
(cutSelection): ditto
* src/frontends/{qt3,gtk}/GuiImplementation.C
(GuiImplementation::newWorkArea): create new selection, not clipboard,
since the clipboard is now an object
(GuiImplementation::destroyWorkArea): destroy selection, not clipboard
* src/frontends/{qt4,qt3,gtk}/GuiSelection.h: new, copied from
GuiClipboard.h
* src/frontends/{qt4,qt3,gtk}/GuiSelection.C: new, copied from
GuiClipboard.C
* src/frontends/{qt3,gtk}/GuiImplementation.h
(selection): new accessor for selection_
(selection_): new, the global selection object
* src/frontends/{qt4,qt3,gtk}/Makefile.am: add GuiSelection.C and
GuiSelection.h
* src/frontends/{qt4,qt3,gtk}/GuiClipboard.C
(GuiClipboard::get): return clipboard, not selection
(GuiClipboard::put): stuff clipboard, not selection
* src/frontends/{qt4,qt3,gtk}/GuiClipboard.h
(haveSelection): remove (this is now in GuiSelection)
* src/frontends/{qt3,gtk}/GuiClipboard.h
(old_work_area_): remove, since it is not needed anymore
* src/frontends/gtk/ghelpers.C
(getGTKStockIcon): handle LFUN_CLIPBOARD_PASTE
* src/frontends/Clipboard.h
(haveSelection): remove (this is now in Selection)
* src/frontends/qt4/GuiImplementation.[Ch]
(GuiImplementation::selection): new accessor for selection_
* src/frontends/Gui.h
(selection): New accessor for the global selection object
* src/frontends/Selection.h; new, copied from Clipboard.h
* src/frontends/Makefile.am: add Selection.h
* src/text3.C
(various): s/clipboard().haveSelection/selection().haveSelection/
(LyXText::dispatch): handle LFUN_CLIPBOARD_PASTE
(LyXText::getStatus): ditto
* src/lfuns.h: new lfun LFUN_CLIPBOARD_PASTE
* lib/ui/stdmenus.ui: add new lfun LFUN_CLIPBOARD_PASTE
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@14408 a592a061-630c-0410-9148-cb99ea01b6c8
