Instead of the weird corner line, display a pilcrow sign (even when
disabled in prefs) to mark inserted/deleted end of paragraph.
Incidentally, this fixes the recent placement bug of the corner line.
The goal of this commit is to simplify the logic in TextMetrics::draw.
Now, rows are repainted depending on their changed() status.
Instead of checking whether rows have been scrolled horizontally at
draw time, the code marks the row as changed when testing for
horizontal scrolling.
To this end a new method TestMetrics::setRowChanged is added, that
searches a row in the text metrics cache and marks it changed if
found.
The old code that remembered the previously scrolled row can now be
removed.
Currently, our computation of row height is not completely standard:
* we ignore completely the QFontMetrics::leading() parameter
* we add arbitrarily 2 hardcoded pixels to the height.
This patch reverses these two choices, which leads to
* slightly larger spacing for MinionPro (which has a big leading).
* an additional spacing of 20% font height that depends on dpi and zoom.
Visual inspection with LibreOffice seems to imply that it disregards
the font leading but uses a interline which is 20% larger than the
font height.
When several lines of text are in the same variable-width tabular
cell, it is not possible to align properly the rows until the cell
width is known.
Therefore a parameter is added to redoParagraph to skip this
computation, so that it can be done later in TextMetrics::metrics.
Other calls to redoParagraph in the code are not affected. It is not
clear at this point whether they may create artefacts.
computeRowMetrics has been renamed to setRowAlignment to better
reflect its use.
Fixes bug #11447.
The enum is now made of flags that can be combined.
This introduces several new values for Inset::DisplayType:
BreakBefore, BreakAfter and Display=BreakBefore|BreakAfter. This
last value replaces AlignCenter.
Additionally the flags NoBoundary and CanBreakAfter are introduced for
future use.
Now a left aligned displayed inset will be defined as Display|LeftAlign.
A newline inset is characterized as BreakAfter.
This structure is used in breakRow to avoid explicit calls to
isNewline() or isEnvSeparator(). More improvements will be built on
top of this.
Additionally several redundant display() methods (which returned
Inline) have been removed.
The part of code that removed space at start of paragraph have been
there forever, but its intent is unclear. For example, cutting text at
the end of a paragraph will lead to remove space at the start of this
same paragraph.
The removal of this functionality is offset by a rewrite of DEPM that
makes it more thorough.
Fixes bug #10503.
This effectively enables linebreaks, multipars and layout changes in
non-fixed width (i.e., standard) table columns.
Fixes: #6577
TODO: metrics are wrong (too wide) on screen with linebreaks.
The new code is much simpler: what it does is, after redrawing has
been done, to mark the cursor row as changed, so that it will be
repainted on next paint event.
This avoids some crashes at the price of possibly repainting the row
when it was not necessary.
In cursorY, it is dangerous to access par_petrics_[0], since one does
not know whether metrics have been computed for this paragraph (which
may be off-screen).
It is safer to use parMetrics(0), that will compute the paragraph
metrics as needed.
Fixes bug #8120.
The function does not use for now any information from the BufferView
(only lyxrc), but this should eventually change if we want to honor
multi monitor setups properly.
This is preliminary work, this code still feels too complicated for
its own good.
Let Row::isMarginSelected return false when Row::selection() is false
(the other changes are indentation).
This allows to remove the test for selection() in
setSelectionAndMargins, so that begin/end_margin_sel are always set
correctly.
Add clearSelectionAndMargins() instead of calling directly setSelection
(which is now private) with arguments (-1, -1).
Fixes bug #10972.
At some time it seemed like a good idea in breakRow() to return early
when the row was bound to be empty. It turns out that this creates two
symptoms:
* empty paragraphs will not have an end of paragraph marker
* since row width is not correctly computed in this case, caret ghosts
can appear in master.
This commit removes the oprimization and replace the do {} while()
construct to a straightforward while() {}.
Related to bug #10952.
The bug is the following: when selecting several paragraphs quickly
enough, some rows do not get selected.This is a consequence of the
removal of row crc, which lead to not taking into account the
selection status of the row in the decision to repaint.
The solution chosen here is to add a Row::change() helper function to
modify row members. This will set the Row changed status whenever the
value of the member changes.
When the caret is at end of row, if may happen that it is drawn after
the end of the row. In this case caret blinking will not work
properly. This patch extends the row background on the left and right
by Inset::TEXT_TO_INSET_OFFSET. This is only a hack that will not work
if the caret has a ridiculous width like 6.
Additionally, introduce some (disabled) debug code that numbers the
rows on screen by painting order.
Finally, make the code that detects whether the caret was in a given
row more precise (take boundary into account).
Fixes (mostly, see above) bug #10797.
This computation did not make sense anymore since we began to put the
contents in the Row object. The fact that it worked was a coincidence.
Instead, we set rows as changed() on creation and reset that once they
have been drawn. This will allow in the future for a finer definition
of what to redraw or not.
Also update the PAINTING_ANALYSIS document
It is wrong to compute this at paint time. In general, painting a row
should not require any access to a paragraph object, but we are far
from there now.
The goal of this commit is to ensure that a processUpdateFlags call
that requires no redraw will not override a previous one that did
require a redraw.
To this end, the semantics of the flag argument is now different: its
value is now OR'ed with a private update_flags_ variable. This
variable is only reset after the buffer view has actually been
redrawn.
A new Update::ForceRedraw flag has been added. It requires a full
redraw but no metrics computation. It is not used in the main code
(yet), but avoids to compute metrics repeatedly in consecutive
processUpdateFlags calls.
The process is now as follows:
- if flags is just None, return immediately, there is nothing to do.
- the Force flag is honored (full metrics computation) and replaced
with ForceDraw.
- the FitCursor flag is honored and removed from the flags.
- the SinglePar update is added if ForceDraw is not in flags and only
the current par has been modified.
The remaining flags are only then added to the BufferView update
flags, and the update strategy is computed for the next paint event.
Finally the dubious call to updateMacros in updateMetrics has been
removed for performance reasons.
Now painting the workarea is done at paint events as should be.
Explicit painting after updating metrics has been replaced by a much
lighter procedure (updatePosCache) to update the insets positions cache.
Expected benefits:
- better performance
- proper use of subpixel aliasing
The LyXRC variable use_qimage is not needed anymore and is therefore removed.
This patch makes sure that, every time a ParagraphMetrics has its
position set, the inset positions for the insets held by this
paragraph are remembered too.
This is complementary to BufferView::updatePosCache, but I do not have
hard evidence that this is required other than to increase robustness.
It may help in some cases when scrolling the document (scrollbar,
cursor up/down, page up/down).
The trick is to remember in BufferView what has been done at the
previous draw, so that the row that contained the caret can be
repainted if needed.
To this end, add an argument paint_caret to BufferView, although
painting the caret is not the job of the BufferView (at this point).
BufferView::needRepaint will act as an interface with
TextMetrics::drawParagraph to know whether the painting of a given
row should be forced.
Currently everything is done at the top row level, so that, if the
caret is in a large table, the whole table will have to be repainted.
It is not clear yet that this is necessary.
Normally the two stages of drawing are
1/ compute metrics of insets/rows/paragraphs/mathrow...
2/ draw the elements and cache their positions
Now the three stages are
1/ metrics
2/ nodraw: do not draw the elements, but cache their position
3/ draw the elements (and store again their position; it does not
seems to hurt performance).
Revive the NullPainter: this replaces the setDrawingEnabled mechanism
with a painter that does nothing. The advantage is that updatePosCache
(renamed from setPosCache) does not need anymore to be invoked from
the frontend.
updatePosCache (the nodraw stage) is called at the end of
BufferView::updateMetrics.
This commit does a bulk fix of incorrect annotations (comments) at the
end of namespaces.
The commit was generated by initially running clang-format, and then
from the diff of the result extracting the hunks corresponding to
fixes of namespace comments. The changes being applied and all the
results have been manually reviewed. The source code successfully
builds on macOS.
Further details on the steps below, in case they're of interest to
someone else in the future.
1. Checkout a fresh and up to date version of src/
git pull && git checkout -- src && git status src
2. Ensure there's a suitable .clang-format in place, i.e. with options
to fix the comment at the end of namespaces, including:
FixNamespaceComments: true
SpacesBeforeTrailingComments: 1
and that clang-format is >= 5.0.0, by doing e.g.:
clang-format -dump-config | grep Comments:
clang-format --version
3. Apply clang-format to the source:
clang-format -i $(find src -name "*.cpp" -or -name "*.h")
4. Create and filter out hunks related to fixing the namespace
git diff -U0 src > tmp.patch
grepdiff '^} // namespace' --output-matching=hunk tmp.patch > fix_namespace.patch
5. Filter out hunks corresponding to simple fixes into to a separate patch:
pcregrep -M -e '^diff[^\n]+\nindex[^\n]+\n--- [^\n]+\n\+\+\+ [^\n]+\n' \
-e '^@@ -[0-9]+ \+[0-9]+ @@[^\n]*\n-\}[^\n]*\n\+\}[^\n]*\n' \
fix_namespace.patch > fix_namespace_simple.patch
6. Manually review the simple patch and then apply it, after first
restoring the source.
git checkout -- src
patch -p1 < fix_namespace_simple.path
7. Manually review the (simple) changes and then stage the changes
git diff src
git add src
8. Again apply clang-format and filter out hunks related to any
remaining fixes to the namespace, this time filter with more
context. There will be fewer hunks as all the simple cases have
already been handled:
clang-format -i $(find src -name "*.cpp" -or -name "*.h")
git diff src > tmp.patch
grepdiff '^} // namespace' --output-matching=hunk tmp.patch > fix_namespace2.patch
9. Manually review/edit the resulting patch file to remove hunks for files
which need to be dealt with manually, noting the file names and
line numbers. Then restore files to as before applying clang-format
and apply the patch:
git checkout src
patch -p1 < fix_namespace2.patch
10. Manually fix the files noted in the previous step. Stage files,
review changes and commit.
The test added at 359aef92 was incorrect. Actually, Inset::editXY
returns the inset when it is edited and also when it is not, which
can be confusing. So if we are unlucky and the slices positions in the
text area and in the inner inset match, the code below triggers and
many bad things can happen.
Also improve the documentation of Inset::editXY and TextMetrics::editXY.
Fixes#10691.
The test added at 359aef92 was incorrect. Actually, Inset::editXY
returns the inset when it is edited and also when it is not, which
can be confusing. So if we are unlucky and the slices positions in the
text area and in the inner inset match, the code below triggers and
many bad things can happen.
editXY() should probably have a documented way to indicate whether the
cursor has entered the inset, although the test used right now is
probably OK. The inset value is useful mainly for context menus or
tasks that need to know which inset the (x, y) coordinates
point to.
Note finally that the documentation of TextMetrics::editXY is
incorrect concerning the return value. It will return a non-null value
if the cursor is on a not editable inset.
Fixes#10691.
When an inset wants to use the whole available width, it is necessary
to take into account that some of this width may already be taken by
the end-of-paragraph (pilcrow) marker.
Fixes bug #10537.
This is done by two things:
1/ the equation returns LefAlign as display() value
2/ Inset::indent() return a value (in general 0) that should be added
on the left (or right in rtl) of the inset when it is flushed.
The code that uses these values is in TextMetrics::computeRowMetrics.
Use Length instead of HSpace for math_indentation and rename it to mathindent.
Get rid of the string version.
Rename (g|s)etMathIndentation() to (g|s)etMathIndent().
Remove the HSpace class altogether.
Some cleanups to parindent support to look like mathindent.
Instead of using complicated (and wrong) code, it is better to use
getPosNearX here.
Also simplify the code by removing temporary variables.
Fixes part of #10569.
The code that looks whether neighbor block has a different direction
should look to the left or to the right depending on the direction of
the current block.
Fixes part of bug #10569
