* remove unused class TexStream.
* remove unused virtual method Inset::cellXOffset
* remove second argument of FileDialog constructor, which was actually
not used
* remove some dead local code
* remove some unused private members of classes
* in InsetMathNest::updateBuffer, fix the logic of a test
Now interactive insertion of \smash[t] and \smash[b] is possible again.
\smash with optional argument behaves now exactly as in LyX 2.0.x, and without
optional argument it is supported by InsetMathPhantom.
each failure.
There are several places I was not sure what to do. These are marked
by comments beginning "LASSERT:" so they can be found easily. At the
moment, they are at:
Author.cpp:105: // LASSERT: What should we do here?
Author.cpp:121: // LASSERT: What should we do here?
Buffer.cpp:4525: // LASSERT: Is it safe to continue here, or should we just return?
Cursor.cpp:345: // LASSERT: Is it safe to continue here, or should we return?
Cursor.cpp:403: // LASSERT: Is it safe to continue here, or should we return?
Cursor.cpp:1143: // LASSERT: There have been several bugs around this code, that seem
CursorSlice.cpp:83: // LASSERT: This should only ever be called from an InsetMath.
CursorSlice.cpp:92: // LASSERT: This should only ever be called from an InsetMath.
LayoutFile.cpp:303: // LASSERT: Why would this fail?
Text.cpp:995: // LASSERT: Is it safe to continue here?
As discussed on the list. No automatic contents detection is done, the user
needs to use the special paste menu instead. I used the new TempFile class
for safe temporary file handling.
The documentation would go into section 2.2 of UserGuide.lyx, but I am not
allowed to edit that document.
The fix is basically mechanical, the additional code for fraction like insets
with three arguments was stolen from \unitfrac. As any math package,
stackrel.sty needs a buffer parameter to switch it off.
I also added the two stackrel flavours to the toolbar.
While cppcheck did not turn out any suspicious error messages, using
the "performance" flag highlighted several nitpicks in three categories
* do not use it++ for iterators, ++it is better
* do not use size() to test for emptyness, empty() is here
* do not use "const T" as a function parameter, "const & T" is better
I doubt that any of these is a real performance problem, but the code is cleaner anyway.
* Avoid undo step when using backspace in macro mode
* Use recordUndoInset when entering macro mode (if one enters something like \hline, the outer inset itself will be modified)
* Use recordUndoInset when pasting in an INsetMathGrid (same reason as above)
If \hline is entered, do not create an unknown inset, but increase the number
of hlines of the current row if that is allowed. The same idea is applied to
copy-paste (not part of the bug report).
This is also a test for committing via git.
changing limits status (fixes bug #8007)
* InsetMathScript::getStatus (new) : handle properly status for LFUN_MATH_LIMITS here, along with checkmark support for the menu)
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@40700 a592a061-630c-0410-9148-cb99ea01b6c8
- Interpret argument of LFUN_SPACE_INSERT correctly
- Use InsetMathSpace instead of InsetMathSpecialChar for "\ " (bug # 7728)
- Use InsetMathSpace instead of InsetMathChar for ~ (bug # 7728).
This fixes also the display in LyX (previously a literal ~ was displayed).
Using InsetMathSpace enables also the "Insert Formatting" menu entries.
No file format change is needed, since the LaTeX export is unchanged.
Note that there are still some bugs related to spaces in math:
#7746, #7747, #7749, #7842
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@39947 a592a061-630c-0410-9148-cb99ea01b6c8
Added corresponding regression tests findadv-re-01 and -02 for finding these special characters.
Unfortunately, braces {} are a little bit special and don't work yet. Added findadv-re-03 regression test to not forget about this case.
This goes along the line of fixing issues reported by Andrew Parsloe and summarised as #7638.
Last note: Still there will be cases when the Advanced F&R won't work, especially if the text to be found and/or the search pattern is preceded by backslashes or others.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@39135 a592a061-630c-0410-9148-cb99ea01b6c8
assure to switch to math mode if needed. This helps avoiding latex
errors (see http://thread.gmane.org/gmane.editors.lyx.general/69580)
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@38579 a592a061-630c-0410-9148-cb99ea01b6c8
Two things have been fixed here:
1) the selection should not be cleared when the user right clicks a math inset that is part of the selection,
2) the type of context menu should be determined at mouse-press, because that is the moment when the cursor is set. However, we should do it after setting the cursor, because setting the cursor might change the selection status and this influences the choice for the type of context menu.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@37961 a592a061-630c-0410-9148-cb99ea01b6c8
Currently, if an inset outputs a newline, the new latex row is still
associated with a previous id/pos. Now, if a latex error occurs before
this newline, we would still highlight everything associated to that
id/pos, even if it is extraneous to the error.
This is avoided by associating the new latex row with the id/pos in
effect right before entering the inset. If an inset does not output
a newline, it is not excluded from the selection, consistent with the
fact that the text of the inset does appear in the error description.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@37903 a592a061-630c-0410-9148-cb99ea01b6c8
counting when exporting to latex. This is done for the code comprised
between \begin{document} and \end{document}, while the preamble code
still needs manual calls to TexRow::newline() for registering new lines.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@37584 a592a061-630c-0410-9148-cb99ea01b6c8
blank lines may be inadvertently output. This is achieved by using two
special iomanip-like variables (breakln and safebreakln) in the lyx::
namespace. When they are inserted in the stream, a newline is output
only if not already at the beginning of a line. The difference between
breakln and safebreakln is that, if needed, the former outputs '\n'
and the latter "%\n".
In future, the new class will also be used for counting the number of
newlines issued. Even if the infractrure for doing that is already in
place, the counting is essentially still done the old way.
There are still places in the code where the functionality of the
class could be used, most probably. ATM, it is used for InsetTabular,
InsetListings, InsetFloat, and InsetText.
The Comment and GreyedOut insets required a special treatment and a
new InsetLayout parameter (Display) has been introduced. The default
for Display is "true", meaning that the corresponding latex
environment is of "display" type, i.e., it stands on its own, whereas
"false" means that the contents appear inline with the text. The
latter is the case for both Comment and GreyedOut insets.
Mostly, the only visible effects on latex exports should be the
disappearing of some redundant % chars and the appearing/disappearing
of null {} latex groups after a comment or lyxgreyedout environments
(they are related to the presence or absence of a space immediately
after those environments), as well as the fact that math environments
are now started on their own lines.
As a last thing, only the latex code between \begin{document} and
\end{document} goes through the new class, the preamble being directly
output through odocstream, as usual.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@37360 a592a061-630c-0410-9148-cb99ea01b6c8
inset-insert simply swallows the selection, while box-insert, note-insert etc.
put the selection inside the new inset.
As a side effect the toolbar icons get better names, as requested by Uwe.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@36451 a592a061-630c-0410-9148-cb99ea01b6c8
A dynamic_cast is necessary when:
- the object to be casted is from an external library because we can't add Qxxx::asXxxx() to Qt e.g.:
* QAbstractListModel to GuiIdListModel,
* QValidator to PathValidator,
* QWidget to TabWorkArea,
* QWidget to GuiWorkArea;
- the object is to be casted from an interface to the implementing class, because the Interface does not know by whom it is implemented:
* ProgressInterface to GuiProgress,
* Application to GuiApplication.
A dynamic_cast can be replaced by:
- already existing as***Inset() functions, e.g.:
* asHullInset(),
* asInsetMath()->asMacro(),
* asInsetText();
- a static_cast when we are sure this can't go wrong, e.g.:
* we are sure that CellData::inset->clone() is an InsetTableCell,
* in cases where we explicitly check it->lyxCode().
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@35855 a592a061-630c-0410-9148-cb99ea01b6c8
DispatchResult to store a flag that tells us whether we need a buffer
update or not.
So: If you find a missing one, go to an appropriate place in the
dispatch and call cur.forceBufferUpdate() or, if you don't have a cursor
but do have a DispatchResult, call dr.forceBufferUpdate().
There is one remaining call I could not move, in
TextMetrics::redoParagraph. But this looks like an emergency call when
the macro context has not been set. There are also a couple calls that
are connected with buffer creation that I commented out, since the same
call is done again almost immediately. But I'm not positive about those.
Now the nice thing would be to do the same for updateMacros().
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@34826 a592a061-630c-0410-9148-cb99ea01b6c8
This is also in preparation of a decent fix for bug #3900.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@34347 a592a061-630c-0410-9148-cb99ea01b6c8
- proper message passing for all tabular features
- properly define which feature needs an argument
* replace LFUN_TABULAR_FEATURE with LFUN_INSET_MODIFY
- The math tables are also affected. In the future a common base class
between math and text table will solve this inconsistency.
- There is a hack in GuiApplication in order to not rename the toolbar
icons. This will have to be cleaned up with a general icon naming for
LFUN_INSET_MODIFY... to be discussed.
* Tabular Dialog:
- big cleanup, lots and lots of bug fixing here
- migrated to InsetParamsWidget
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@33495 a592a061-630c-0410-9148-cb99ea01b6c8
a lot of simplification is possible. Except some instability period...
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@33389 a592a061-630c-0410-9148-cb99ea01b6c8
This fixes bug #1560.
The diverse setBuffer / updateLabels calls need auditing. See FIXMEs.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@33249 a592a061-630c-0410-9148-cb99ea01b6c8
Math manual loads and save correctly it seems but expect some instability period.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@31898 a592a061-630c-0410-9148-cb99ea01b6c8
This patch initializes the buffer_ member of a MathHull inset in most
(but not all) cases. The problems with buffer_ should be greatly
allievated now, but there still can be some corner case.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@31873 a592a061-630c-0410-9148-cb99ea01b6c8
* MathStream{.cpp, h}:
- replace bool dryrun() by enum output that also knows whether the stream is for instant preview
* InsetMathHull.cpp:
- tell the stream whether we use it for instant preview.
* MathString.cpp (write):
- gracefully catch encoding exception for instant preview.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@30895 a592a061-630c-0410-9148-cb99ea01b6c8
introduces a new LFUN and fixes#4620
This can in principle also go to branch when new LFUNs are there allowed, Jürgen?
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@30523 a592a061-630c-0410-9148-cb99ea01b6c8
6047: Lyx 1.6.3 unable to typeset the third chemical equation of the
file mhchem.lyx (package mhchem)
4043: mhchem support
5394: support for the mhchems's \ce command
The \ce and \cf insets are text mode environments that allow entering
spaces and mathmode commands. LyX leaves them alone and doesn't try to
be smart, i.e., the behaviour is exactly the same we had in the old days
with text-in-math mode environments, before the introduction of the
\ensuremath and \lyxmathsym macros. This means that in those environments
one has to know what he is doing, as LyX will not offer any protection.
The hack of enclosing \ce and \cf in a \text{} environment in order to
be able to enter spaces is no longer necessary.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@30338 a592a061-630c-0410-9148-cb99ea01b6c8
When the user wants to resume a macro, delete the current one and insert a new one, which is not yet finalized.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@29687 a592a061-630c-0410-9148-cb99ea01b6c8
When closing the macromode, do the same trick as in lines 835--838.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@29686 a592a061-630c-0410-9148-cb99ea01b6c8
No undo steps are recorded for math-macros. Now, it is also not done when we resume to edit a macro.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@29685 a592a061-630c-0410-9148-cb99ea01b6c8
Unwrapped symbols can be obtained either by dissolving the text inset or by
verbatim paste (Ctrl+Shift+V). In such a case, the symbols are wrapped in
\lyxmathsym when exporting to latex, as usual.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@29096 a592a061-630c-0410-9148-cb99ea01b6c8
Introduce new LFUN_MATH_FONT_STYLE which takes one of the font styles as an argument. A dispatch is being redirected to math-insert.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@28181 a592a061-630c-0410-9148-cb99ea01b6c8
The basic idea was to reuse the corresponding text space inset in the same
fashion as is already done for references. The dialog displays a different
selection for math than for text. If wanted, the additional spaces could
also be enabled for text, but that would be a file format change.
Constructs like \hspace{\mylengthvariable} that are not supported are
treated by the math parser as ERT as before.
For reasons I don't know the context menu does not work, but this is not so
important IMHO (since a left click opens the dialog).
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@27954 a592a061-630c-0410-9148-cb99ea01b6c8
be represented on screen as a visible space rather than as an empty macro.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@27140 a592a061-630c-0410-9148-cb99ea01b6c8
For example, this allows to paste something like $x$ to a textmode
inset and get the expected result. If $x$ is pasted in mathmode,
it is pasted verbatim, such that no compile errors can arise.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@26935 a592a061-630c-0410-9148-cb99ea01b6c8
