This commit does a bulk fix of incorrect annotations (comments) at the
end of namespaces.
The commit was generated by initially running clang-format, and then
from the diff of the result extracting the hunks corresponding to
fixes of namespace comments. The changes being applied and all the
results have been manually reviewed. The source code successfully
builds on macOS.
Further details on the steps below, in case they're of interest to
someone else in the future.
1. Checkout a fresh and up to date version of src/
git pull && git checkout -- src && git status src
2. Ensure there's a suitable .clang-format in place, i.e. with options
to fix the comment at the end of namespaces, including:
FixNamespaceComments: true
SpacesBeforeTrailingComments: 1
and that clang-format is >= 5.0.0, by doing e.g.:
clang-format -dump-config | grep Comments:
clang-format --version
3. Apply clang-format to the source:
clang-format -i $(find src -name "*.cpp" -or -name "*.h")
4. Create and filter out hunks related to fixing the namespace
git diff -U0 src > tmp.patch
grepdiff '^} // namespace' --output-matching=hunk tmp.patch > fix_namespace.patch
5. Filter out hunks corresponding to simple fixes into to a separate patch:
pcregrep -M -e '^diff[^\n]+\nindex[^\n]+\n--- [^\n]+\n\+\+\+ [^\n]+\n' \
-e '^@@ -[0-9]+ \+[0-9]+ @@[^\n]*\n-\}[^\n]*\n\+\}[^\n]*\n' \
fix_namespace.patch > fix_namespace_simple.patch
6. Manually review the simple patch and then apply it, after first
restoring the source.
git checkout -- src
patch -p1 < fix_namespace_simple.path
7. Manually review the (simple) changes and then stage the changes
git diff src
git add src
8. Again apply clang-format and filter out hunks related to any
remaining fixes to the namespace, this time filter with more
context. There will be fewer hunks as all the simple cases have
already been handled:
clang-format -i $(find src -name "*.cpp" -or -name "*.h")
git diff src > tmp.patch
grepdiff '^} // namespace' --output-matching=hunk tmp.patch > fix_namespace2.patch
9. Manually review/edit the resulting patch file to remove hunks for files
which need to be dealt with manually, noting the file names and
line numbers. Then restore files to as before applying clang-format
and apply the patch:
git checkout src
patch -p1 < fix_namespace2.patch
10. Manually fix the files noted in the previous step. Stage files,
review changes and commit.
File format change.
This allows for the relevant InsetCommand-based dialogs (such as
citation text before/after, Bibitem label, hyperlink name etc.)
to provide both the input of verbatim code or text that is transformed
to proper LaTeX code.
Some dialogs (Nomencl, Href) already had some methods (although they
could not be toggled), which are now centralized and streamlined.
The initial work of this patch has been done by Georg Baum (see
http://www.lyx.org/trac/attachment/ticket/2751/x.diff)
Fixes: #2751, #8227.
* New TOC "math-macro". This means that math macros can now be accessed in the
outline pane in their order of appearance or in alphabetical order, and can be
searched using the filter.
* Lists of floats now show subfloats deeper in the navigation menu
* The arbitrary 30 element cut-off after which nothing is shown except "Open
Navigator..." is removed. Menus now have no limit in size, so Qt may display
them scrollable. In exchange, we always show "Open outliner..." at the
beginning. I tested for performance issues with a rather complex document and
it is fine; but this does not exclude corner cases with lots of TOC entries of
a certain kind. If necessary, populating the navigation sub-menu should be
delayed like the main menu.
* Elements that do not contribute to the output (e.g. in a note, a disabled
branch) are now preceded with a symbol indicating this status. (The machinery
was already there; I wonder why it was not implemented already.) I have chosen
U+274E NEGATIVE SQUARED CROSS MARK.
* Fix the contextual menus in the outliner (bug introduced at 94e992c5).
* Toc item now move to the caption when present, but first center on the float,
to prevent the situation where the caption is at the top of the screen and the
contents of the float is off-screen above the caption.
(Internally, the action of the toc items can now be customised)
* Fix the LyXHTML output. Disabled captions no longer appear in the list of
figures.
We introduce TocBuilder for building TOCs that take into account both float
insets and their captions.
* Floats without caption are shown with their content.
* Floats with a caption are shown with their caption, but clicking the entry now
correctly moves to the float and not to the caption.
* Subsequent captions produce additional entries in the TOC.
* Figures and subfigures are correctly ordered in the outliner.
* New TOC "senseless" for captions appearing alone (a bit like broken references
are still displayed in the menu and outliner).
* Disable LFUN_CAPTION_INSERT if there is already a caption in a listing
Known issues:
* Inconsistent output for includes located inside floats
* We should record the end of the float in addition of the beginning for a more
accurate cursor -> outliner entry conversion
* Remove the UndoKind parameter in the general interface
* move recordUndoInset to Cursor
* remove one variant of Undo::recordUndo.
* get rid of Text::recUndo.
so we can write a limited amount when using this for TOC and
tooltip output.
This should solve the problem with slowness that Kornel noticed,
which was caused by our trying to write an entire plaintext
bibliography every time we updated the TOC. We did that because
he had a bibliography inside a branch, and we use plaintext for
creating the tooltip that goes with the branch list.
Other related bugs were fixed along the way. E.g., it turns out
that, if someone had an InsetInclude inside a branch, then we would
have been writing a *plaintext file* for that inset every time we
updated the TOC. I wonder if some of the other reports of slowness
we have received might be due to this kind of issue?
If someone can tell me how I can tell QtCreator to actually use tabs, not spaces, I would be most grateful (yes, I have set Tab Policy to Tabs Only in Prefs)
Math commands need it as well as text commands. At the same time, this
further unifies the checking for termination and fixes cases of wrong
output (e.g. for 0x2005).
preparatory to fixing #7080. Note that mathed uses the same routine, but
for a completely different purpose, so I did not rename it there. I have
seen no difference in behavior after testing, e.g., opening and
exporting Math.lyx, and also re-saving it and looking at the diff.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@38109 a592a061-630c-0410-9148-cb99ea01b6c8
counting when exporting to latex. This is done for the code comprised
between \begin{document} and \end{document}, while the preamble code
still needs manual calls to TexRow::newline() for registering new lines.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@37584 a592a061-630c-0410-9148-cb99ea01b6c8
blank lines may be inadvertently output. This is achieved by using two
special iomanip-like variables (breakln and safebreakln) in the lyx::
namespace. When they are inserted in the stream, a newline is output
only if not already at the beginning of a line. The difference between
breakln and safebreakln is that, if needed, the former outputs '\n'
and the latter "%\n".
In future, the new class will also be used for counting the number of
newlines issued. Even if the infractrure for doing that is already in
place, the counting is essentially still done the old way.
There are still places in the code where the functionality of the
class could be used, most probably. ATM, it is used for InsetTabular,
InsetListings, InsetFloat, and InsetText.
The Comment and GreyedOut insets required a special treatment and a
new InsetLayout parameter (Display) has been introduced. The default
for Display is "true", meaning that the corresponding latex
environment is of "display" type, i.e., it stands on its own, whereas
"false" means that the contents appear inline with the text. The
latter is the case for both Comment and GreyedOut insets.
Mostly, the only visible effects on latex exports should be the
disappearing of some redundant % chars and the appearing/disappearing
of null {} latex groups after a comment or lyxgreyedout environments
(they are related to the presence or absence of a space immediately
after those environments), as well as the fact that math environments
are now started on their own lines.
As a last thing, only the latex code between \begin{document} and
\end{document} goes through the new class, the preamble being directly
output through odocstream, as usual.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@37360 a592a061-630c-0410-9148-cb99ea01b6c8
of things like:
pit.push_back(CursorSlice(*this));
which I've had to change to:
pit.push_back(CursorSlice(const_cast<InsetCaption &>(*this)));
and similarly in a few other places.
If anyone thinks we should instead have:
explicit CursorSlice(Inset const &);
then we can also do that.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@37192 a592a061-630c-0410-9148-cb99ea01b6c8
that also makes sure it doesn't do more work than it needs to do, by
limiting the size to 40 characters. Previously, InsetBranch::addToToc()
would have added a string representing the entire contents of the
branch! It's hard to imagine that having to recalculate that sort of
thing doesn't cause some problems with speed, especially in documents
with lots of notes and branches and such.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@36974 a592a061-630c-0410-9148-cb99ea01b6c8
menus were (intentionally) missing, and it turns out they were needed.
Normally all invocations of INSET_MODIFY should trigger a recordUndo now.
Of course all cases have not been tested, but it should be working.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@36770 a592a061-630c-0410-9148-cb99ea01b6c8
THis is a consequence of the new AtPoint mechanism. In the old
world, recordUndoInset was called before INSET_MODIFY. I reintroduced
manual recordUndoInset calls in all places that matter. I suspect
that this issue should be revisited later.
Note that recordUndoInset can now take an optional parameter that tells
what inset is concerned. This is useful because the cursor can be
either just inside the inset or in front of it.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@36580 a592a061-630c-0410-9148-cb99ea01b6c8
here, but not very noticeable, I think, as these ones aren't called by
the addToToc stuff.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@36347 a592a061-630c-0410-9148-cb99ea01b6c8
DispatchResult to store a flag that tells us whether we need a buffer
update or not.
So: If you find a missing one, go to an appropriate place in the
dispatch and call cur.forceBufferUpdate() or, if you don't have a cursor
but do have a DispatchResult, call dr.forceBufferUpdate().
There is one remaining call I could not move, in
TextMetrics::redoParagraph. But this looks like an emergency call when
the macro context has not been set. There are also a couple calls that
are connected with buffer creation that I commented out, since the same
call is done again almost immediately. But I'm not positive about those.
Now the nice thing would be to do the same for updateMacros().
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@34826 a592a061-630c-0410-9148-cb99ea01b6c8
