XeTeX with TeX fonts is only safe with ASCII input encoding (see #9740)
and we therefore force "ascii" when exporting with XeTeX and 8-bit TeX-fonts.
However, "utf8-plain" is a "power-user" option, which allows to switch off LyX's
encoding of the LaTeX file:
keep this also for "XeTeX with TeX fonts".
The user is responsible to ensure all characters can be processed and are
correctly shown in the output. The provided test sample shows the problems
with this encoding without special measures (like loading fontspec in the
user-preamble or a document class).
This is a mechanical replacement. For now it seems that unique_ptrs are
essentially used for exception-safety. More could certainly be done to clarify
pointer ownership in general.
(#8738)
For efficiency, we add a new flag to the buffer indicating when changes are
present. This flag is updated at each buffer update, and also when explicitly
requested via a dispatch result flag.
Deriving from std::vector to provide helper functions appears a touch
excessive. Use typedef instead and move helper functions to the base class. New
header Toc.h provided to replace forward-declarations.
Remove TocIterator which is useless.
Increment LyX format to 504.
With this new parameter, the user can indicate that some other parameters that
are frequently switched must not be recorded in the file (as if they were a
setting specific to the user or transient, rather than a document setting). This
will play nicer with version control systems.
See the discussion, e.g.:
http://thread.gmane.org/gmane.editors.lyx.devel/157824/focus=157993 (third
solution mentioned)
TODO:
* The interface remains to be set up. We cannot change this setting from LyX
for now.
* If save_transient_properties is false, we should read the user setting as a
per-user-per-document (session) setting (e.g. like the cursor position).
* Once the above is done, we can treat \justification the same way (but it would
be even better if \justification was moved to lyxrc).
The current behaviour of the \origin parameter replaces relative file names
with the absolute original names if a document has been moved even if the
files have been moved as well. This behaviour is annoying e.g. for editing the
LyX docs in a git checkout.
Now file names are only replaced if the referenced file sdo not exist.
whether a given child Buffer is also a child of some other parent.
Then do the releasing or resetting where this method is called.
There should be no change of behavior with this patch.
LyX format, create a backup of the original file. We put it in the backup
directory, if one exists, otherwise in the directory the original file is
in. This is the same strategy as for normal backups. Basically, the only
diferences are: (i) what name we use and (ii) we do not over-write any
backups that may already exist.
Actually, the changed tests were used to prevent overwriting the encoding
changed in Buffer::writeLaTeX with a language-default encoding.
This is still required for XeTeX with TeX-fonts unless a proper solution is found.
Documents with more than one encoding and TeX-fonts fail with LuaTeX,
as "luainputenc" can only handle one encoding.
and record an undo call. This deals with the problem of marking
the Buffer dirty, as well.
Move LFUN_BUFFER_TOGGLE_COMPRESSION and LFUN_BUFFER_TOGGLE_OUTPUT_SYNC
to Buffer.cpp, and add an undo call.
Sometimes when compilation fails a PDF file is created but is empty
and the viewer gives an error when trying to view it. One such
example is compiling the current lib/examples/PDF-comment.lyx file
with TeX fonts and the following version of LuaTeX:
beta-0.80.0 (TeX Live 2015) (rev 5238)
Fixes output for 3 of the 4 test lyx-files.
Includes "FIXME"s at places where further action is required to get the XeTeX
export right but I don't know how.
* TexRow now computes rows from a DocIterator. In practice, the cursor
highlighting is now correct inside insets, it is no longer restricted to the
topmost level. It certainly also makes forward-search more precise.
* Added the option to disable a texrow when not needed, for perf.
* Fixed a bug where the last paragraph was not properly highlighted.
Limitations:
* TexRow still does not handle: math (e.g. multi-cell), sub-captions, inset
arguments.
* New TOC "math-macro". This means that math macros can now be accessed in the
outline pane in their order of appearance or in alphabetical order, and can be
searched using the filter.
* Lists of floats now show subfloats deeper in the navigation menu
* The arbitrary 30 element cut-off after which nothing is shown except "Open
Navigator..." is removed. Menus now have no limit in size, so Qt may display
them scrollable. In exchange, we always show "Open outliner..." at the
beginning. I tested for performance issues with a rather complex document and
it is fine; but this does not exclude corner cases with lots of TOC entries of
a certain kind. If necessary, populating the navigation sub-menu should be
delayed like the main menu.
* Elements that do not contribute to the output (e.g. in a note, a disabled
branch) are now preceded with a symbol indicating this status. (The machinery
was already there; I wonder why it was not implemented already.) I have chosen
U+274E NEGATIVE SQUARED CROSS MARK.
* Fix the contextual menus in the outliner (bug introduced at 94e992c5).
* Toc item now move to the caption when present, but first center on the float,
to prevent the situation where the caption is at the top of the screen and the
contents of the float is off-screen above the caption.
(Internally, the action of the toc items can now be customised)
* Fix the LyXHTML output. Disabled captions no longer appear in the list of
figures.
We introduce TocBuilder for building TOCs that take into account both float
insets and their captions.
* Floats without caption are shown with their content.
* Floats with a caption are shown with their caption, but clicking the entry now
correctly moves to the float and not to the caption.
* Subsequent captions produce additional entries in the TOC.
* Figures and subfigures are correctly ordered in the outliner.
* New TOC "senseless" for captions appearing alone (a bit like broken references
are still displayed in the menu and outliner).
* Disable LFUN_CAPTION_INSERT if there is already a caption in a listing
Known issues:
* Inconsistent output for includes located inside floats
* We should record the end of the float in addition of the beginning for a more
accurate cursor -> outliner entry conversion
Fix bugs #6501 and #7359.
* Selection highlighting has been broken since a conflict with
reverse-search was repaired (at 00a62b7c), is now fixed.
* The selection highlighting was not accurate, for LaTeX formats (in
full source view), and meaningless, for non LaTeX formats.
* fix regression at cc00b9aa: force_getcontent_ was always true
therefore the code to detect changes in the generated source was
dead. The consequence is that the source view would jump to the
beginning at each updateView() even if no change occurred. Cc00b9aa
was meant to fix#5600, which I cannot reproduce with the new
implementation.
* Various improvements:
* When the position-to-line conversion is unavailable (LyXHTML, LyX
source, etc.) we focus on the first difference instead.
* Get some space around the cursor
* Respect the scrollbars
* Highlight with QTextEdit::ExtraSelections instead of cursor
selection (the latter used to break syntax highlighting of the
TeX code... which was not so much of an issue before because the
wrong part was selected)
Known issues:
* The highlighting is off by one line in very last paragraph of a
document. This appears to be a bug in TexRow.cpp.
* The highlighting is off for any kind of inset. This could be
solved by adapting TexRow so that it accepts CursorSlices as
and argument for the conversion to line number. (this is bug
#4725)
In order to adjust the path of an included file, when deciding
whether the document was moved or not, it is not sufficient
comparing the paths because the document could have been accessed
through a symbolic link.
This is done only inside LFUN_BUFFER_VIEW_CACHE so as to preserve
the benefits of caching in other places.
Without this commit, if a converter or a user (re)moves the preview
file and then calls buffer-view-cache LyX will launch the viewer for
a file that does not exist.
For a discussion and use case, see:
https://www.mail-archive.com/search?l=mid&q=55D393D7.6050403@lyx.org
It is now possible opening documents that where manually moved to a
different location after they were saved and still produce an output.
Indeed, (hopefully) all needed included files are now still found.
When the moved document is saved again, all paths are accordingly updated.
Of course, for this to work, a document has to be saved in Format 490,
at least.
As an example, after converting the user guide to the last format, it can
be copied anywhere and opened without the need of adapting the paths of
included files or moving them to a proper place.
There is one glitch I am aware of. When moving a child document (but not
the master) the path to the master is correctly updated but it won't be
recognized as such. This is because LyX checks that the parent actually
includes this document but, of course, being the parent document not
touched, it appears not including this child. Anyway, it will also occur
when saving the child to a different location and the user is warned
on the terminal about this fact when the moved child is loaded.
However, there is no problem when it is the master that has been moved.
The "save-as" part of the bug is fixed by extending the \textclass tag
such that, if a local layout file is used, its path relative to the
document directory is now stored together with the name. If a relative
path cannot be used, an absolute one is used but, in this case, the
document is not usable on a different platform.
The "copy" part is fixed by introducing a new \origin tag, which is
written when the file is saved. This tag stores the absolute path of
the document directory. If the document is manually copied to a
different location, the local layout file is retrivied by using
\origin (which is only updated on save).
This new tag may prove useful also for locating other files when the
document is manually moved to a different directory.
As in the original implementation the files needed for the layout
(for example, a latex class) had to be in the same directory as the
layout file, this directory has also to be added to TEXINPUTS.
The document iterator now skips math insets and insets like notes where spell check is disabled.
The continuous spell checking is part of the row painter drawing and the spell check disabled state
has to be passed down recursively while doing the inset painting.
As Enrico said, the user might have installed a package that was
missing (in which case the .tex file would not have changed).
Another reason is that changing some document settings did not
automatically lead to a fresh compile after an error (#9061).
Our old mechanism for detemining whether there was an error was to
check if the dependent file existed in the temporary directory. If
it did not exist, that meant it was removed, presumably because
there was an error during compilation. That mechanism cannot be used
anymore because we keep the files around even after error because of
the "Show Output Anyway" button (09700d5b). This commit implements a
more straightforward way of checking whether there was an error in
the previous preview by simply storing the success of last compile
in a buffer variable.
Building on cd8be655, we still allow viewing a produced PDF even if
there were compilation errors. However, now the user must click the
"Show Output Anyway" button in the LaTeX Errors dialog. The reason
is that before, there was a chance that the user would not realize
there was an error (because the PDF would be shown over the error
dialog). The approach in this commit makes it more clear that there
is an error.
A new LFUN is introduced, LFUN_BUFFER_VIEW_CACHE. It is useful not
just for the implementation of the "Show Output Anyway" button, but
also to show the last compiled version of a document, which can save
time if a document takes a long time to compile (e.g. heavy use of
knitr).
The only real user was Text::insertStringAsLine, but this got changed
in commit 2c7152ab.
While not other place did read the value, there is a side effect of
setAutobreakRow that merges exiting paragraphs. However, this is used
in two situations
* some constructors, where the inset is empty;
* InsetTabular::toggleFixedWidth, which actually contains itself some
code to merge paragraphs.
Therefore the member and all associated code can be removed safely.
If LyX thinks the export was successful but no output file was
produced for preview, then something is wrong (most likely LyX
did not detect an error that occurred during export).
Also clean up some logic.
A PDF is often still produced after a LaTeX error.
If there was an error when exporting a PDF, we now give an error
and the PDF (if it exists), where before we gave the error and
not the PDF. The GUI and command line behaviors are consistent:
in the GUI an error is given and the PDF is viewed; on the
command line, a non-zero exit code is given and a PDF is created.
This also solves what was in my mind an inconsistency: if the user
"updated" a document and there was an error, the resulting
PDF would be shown; but if the user viewed a document and there
was an error, the document would not be shown.
Note that this applies to all output formats, not just PDF.
For discussion, see:
https://www.mail-archive.com/lyx-devel@lists.lyx.org/msg186454.html
Rename recordUndoFullDocument to recordUndoFullBuffer.
Separate the notion of recording changes to paragraphs and recording changes in buffer parameters.
Audit every user of recordUndoFullDocument and replace it with either recordUndoBufferParams or recordUndoFullBuffer. Add comments to identify remaining work.
Our TempFile class uses QTemporaryFile internally, and, on Windows,
this keeps the file locked so that we cannot rename it. So we have
to release the lock.
Add display_pixel_ratio to buffer params to use it for displays with high resolution.
It holds the highest ratio between physical pixels and device-independent pixels of the LyX application.
Preview snippets will be generated using this value to get high resolution preview.
FileName::tempName() created a new temp file name by using qt to create a
temporary file with a unique name, and then deleting that file and returning
the name. This was unsafe, since other processes or even other threads of the
running LyX could create files with the same name between deletion and then
using the temp name.
This is fixed by using the TempFile class instead. As a side effect, a few
cases where the temp files were not deleted after usage were fixed as well.
The only place that is still unsafe is createTmpDir().
- The TempFile class guarantees to generate a file name, we are not limited to
100 tries of a predictable scheme anymore, which could break if LyX
frequently crashes.
- The temp file name generation has no race condition against another LyX
instance in the same directory anymore.
- Symlinks survive saving again (regression of 10364082c8).
* remove unused class TexStream.
* remove unused virtual method Inset::cellXOffset
* remove second argument of FileDialog constructor, which was actually
not used
* remove some dead local code
* remove some unused private members of classes
* in InsetMathNest::updateBuffer, fix the logic of a test
for possible thread conflicts, of the sort Georg resolved at
6a30211f. I have made static variables const where possible,
and marked cases that looked potentially problematic with the
comment:
// FIXME THREAD
Many of these definitely are vulnerable to concurrent access, such
as the static variables declared at the start of output_latex.cpp.
Suppose, e.g., we were outputting latex and also displaying the
source of a different document.
I'd appreciate it if others could grep for "FIXME THREAD" and see
if some of these are harmless, or what.
http://marc.info/?l=lyx-devel&m=138590578911716&w=2
If you look at Buffer.cpp, around line 4351, there was a comment about bug 5699. We are seeing the
same crash. The problem is that, although the master does have a GUI, that GUI is in a different window. So the structureChanged() call we do during updateBuffer() is for the TOC in that window, not the TOC in the window we are actually in. So our TocModel::toc_ has been reset and is invalid, though the widget itself has not been updated and looks fine.
This patch tests whether the master is in the same window as the buffer we are updating.
A problem remains, which is noted in a comment.
In e02df14 the return type of doExport was changed from bool to ExportStatus.
All calls except this one were adjusted. This one did now fail because the
numercial value of ExportSuccess is 0.
The new HTML clipboard export could cause error message boxes on copying
data to the clipboard (bug #8866). These are now suppressed, like all other
errors which might occur for preparing the clipboard data.
LyX, lyx2lyx and tex2lyx produce now all the same version indicator consisting
only of the major and minor version. It is not decided yet whether future
development versions will add a -dev suffix, but for 2.1.0 this change fixes
the inconsistencies.
These should be used if any new style needs to be introduced in the stable
2.1 series: If the ForceLocal flag of the style is set, it will always be
written to the document header, so that even older 2.1 versions can read
and correctly output the document.
Move the handling of branch-(de)activate(master) to Buffer. This code was moved to Bufferview in [3a03e71c/lyxgit] because a cursor was necessary to call Undo::recordUndoFullDocument(). However, it turns out that the undo code is already prepared to handle an empty cursor (and do nothing in this case).
Therefore we do that and move the branch code to Buffer where it belongs.
Note that there was a bug in the previous code that broke undo support: recordUndo should always be called _before_ doing any change.
each failure.
There are several places I was not sure what to do. These are marked
by comments beginning "LASSERT:" so they can be found easily. At the
moment, they are at:
Author.cpp:105: // LASSERT: What should we do here?
Author.cpp:121: // LASSERT: What should we do here?
Buffer.cpp:4525: // LASSERT: Is it safe to continue here, or should we just return?
Cursor.cpp:345: // LASSERT: Is it safe to continue here, or should we return?
Cursor.cpp:403: // LASSERT: Is it safe to continue here, or should we return?
Cursor.cpp:1143: // LASSERT: There have been several bugs around this code, that seem
CursorSlice.cpp:83: // LASSERT: This should only ever be called from an InsetMath.
CursorSlice.cpp:92: // LASSERT: This should only ever be called from an InsetMath.
LayoutFile.cpp:303: // LASSERT: Why would this fail?
Text.cpp:995: // LASSERT: Is it safe to continue here?
This was a simple logic error that crept in during refactoring:
If the format does not match, and the converted file has been read,
the string must not be read.
As discussed on the list. No automatic contents detection is done, the user
needs to use the special paste menu instead. I used the new TempFile class
for safe temporary file handling.
The documentation would go into section 2.2 of UserGuide.lyx, but I am not
allowed to edit that document.
The code does a reload on the buffer to avoid loose pointers if the
file changes directory. This commit adds a bool parameter to
Buffer::reload to allow for keeping the undo stack intact. This is of
couse only wanted in this case, not when reloading an earlier version
of the file.
This commit does a bit more than fix selection, since it saves the full cursor state
in the undo stack. This means that undo now restores:
* the selection
* the current font
* transient mark (shall we keep this one?), logical position...
In order to do that, it introduces an intermediate class between Cursor and DotIterator: CursorData.
The new inheritance diagram is thus
DocIteraator -> CursorData -> Cursor
CursorData contains all the members of Cursor that define the current position, but not the stuff
related to current view of dispatch mechanism. It may make sense in the future to move members
between CursorData and Cursor and to move some member functions to CursorData.
Now UndoElement uses CursorData for cur_before and cur_after, but not for the cell. The undo API uses
also CursorData instead of DocIterator.
The idea is to record undo at the place where the document is modified:
1/ in Buffer::updateBuffer, add a recordUndo, with the caveat that a
const_cast has to be used (because updateBuffer is const but
modifies the document, go figure).
2/ in GuiApplication::dispatch, add an extra undo group that
encompasses the updateBuffer call. Some other undo groups may be
redundant now, but it is not a problem since they do not cost
anything.
In this version, the idea is to record undo at the place where the document is modified, which is definitely cleaner.
1/ in Buffer::updateBuffer, add a recordUndo, with the caveat that a
const_cast has to be used
2/ in GuiApplication::dispatch, add an extra undo group that
encompasses the updateBuffer call. Some other undo groups may be
redundant now, but it is not a problem since they do not cost
anything.
While cppcheck did not turn out any suspicious error messages, using
the "performance" flag highlighted several nitpicks in three categories
* do not use it++ for iterators, ++it is better
* do not use size() to test for emptyness, empty() is here
* do not use "const T" as a function parameter, "const & T" is better
I doubt that any of these is a real performance problem, but the code is cleaner anyway.
In this case, the working dir has already a slash at the end.
Appending another one would result in a path ending with a double slash,
which has a special meaning when used in TEXINPUTS (all subdirs would
be recursively scanned). So, avoid doing that.
If a converter specifies the needaux flag, latex (or xelatex) is
always run to produce the needed auxiliary files. This is wrong
because there are documents that can only be compiled with a specific
backend and thus the conversion may fail. On the other hand, even if
the document specifies the backend to be used, LyX ignores this info.
This commit rectifies this behavior by letting LyX run the same flavor
of the latex backend that shall be used for previewing the document
also for producing the auxiliary files.
Math commands need it as well as text commands. At the same time, this
further unifies the checking for termination and fixes cases of wrong
output (e.g. for 0x2005).
We only copied the error list to the cloned buffer when makeLatexfile
failed. This means that a second try will never clear the error list and
the user will be presented the same list again.
Therefore, we unconditionally copy the error list such that we also clear
the list on success.
then trying to compile.
There are really two problems here. One is that the renamed
buffer needs to be reloaded. All kinds of files, etc, may not
exist any more, if we've been saved to a new directory; our
children e.g. may not be in the right place. And, in this case,
we may no longer be a child of our old parent. Reloading will
fix all of that.
On reload, though, we need to clear our parent, since we may
not have one any more. It will get reset if need be.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@40609 a592a061-630c-0410-9148-cb99ea01b6c8
for this yet, however.
Includes elements of a patch by Rob Oakes.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@40409 a592a061-630c-0410-9148-cb99ea01b6c8
We split Buffer::clone() into various routines that know whether
to clone the children.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@40357 a592a061-630c-0410-9148-cb99ea01b6c8
The global list of cloned buffers was a bad idea. We don't have multiple
export threads, but we can have multiple autosave threads. So now we keep
more than one of these lists at the same time, and each cloned buffer has
a pointer to the relevant list. Note that this would make multiple export
possible, if we wanted to do that at some time.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@40227 a592a061-630c-0410-9148-cb99ea01b6c8
the destructor since we could, in some cases, end up deleting them
multiple times. So we need to keep a list of the Buffers we need to
delete, kind of like the BufferList.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@40205 a592a061-630c-0410-9148-cb99ea01b6c8
- Let all doExport calls honor maintain_unincluded_children
- Also don't let the behaviour depend on supplying the result_file parameter
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@40085 a592a061-630c-0410-9148-cb99ea01b6c8
TODO:
- Also let the public function return an error value,
- Move all user interaction (Alerts etc.) out of Buffer.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@40044 a592a061-630c-0410-9148-cb99ea01b6c8
TODO:
- Also let the public function return an error value,
- Move all user interaction (Alerts etc.) out of Buffer.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@40043 a592a061-630c-0410-9148-cb99ea01b6c8
All calls to doExport from outside of Buffer have the same algorithm to
determine whether the included children parameter should be true. Moreover,
this decision is only based on information from the Buffer itself.
Now, Buffer only has 1 public function doExport and preview.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@40041 a592a061-630c-0410-9148-cb99ea01b6c8
The LyX buffer is cloned before autosaving, but the unnamed_ member was not
copied. This causes the autosave files to end up in the wrong location and
consequently they were never removed afterwards.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@40008 a592a061-630c-0410-9148-cb99ea01b6c8
This restores \input@path handling, which turns out to be necessary, as
the TEXINPUTS mechanism is not used with relative paths. It turns out
that both methods must be used, because \input@path does not work in all
cases (most notably with tikz).
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@39918 a592a061-630c-0410-9148-cb99ea01b6c8
Keeping some debugging output about these filename mangling, in case additional debugging is needed.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@39812 a592a061-630c-0410-9148-cb99ea01b6c8
- \negmedspace and \negthickspace outside of math
- \enspace, \hspace*, \hspace*{\fill} and \hfill inside math
(fileformat change)
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@39557 a592a061-630c-0410-9148-cb99ea01b6c8
When a document is not multi-lingual the text contents is changed
to the new language. This should be recorded for Undo.
Because Undo wants a cursor the implemantation has to be
moved to the BufferView class.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@39508 a592a061-630c-0410-9148-cb99ea01b6c8
The PreviewLoader is created directly by Buffer on demand. The PreviewLoader cache was complex and unneeded because there is one and only one PreviewLoader per Buffer.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@39276 a592a061-630c-0410-9148-cb99ea01b6c8
It's amazing we haven't seen problems with this before. The basic problem is that buf.errorList("whatever") would always return the same global, static error list, if it did not already exist. So, to a significant extent, there was only one global error list!
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@38980 a592a061-630c-0410-9148-cb99ea01b6c8
It's amazing we haven't seen problems with this before. The basic problem is that buf.errorList("whatever") would always return the same global, static error list, if it did not already exist. So, to a significant extent, there was only one global error list!
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@38978 a592a061-630c-0410-9148-cb99ea01b6c8
the same document could not be rendered.
Problem was that we were using children_positions to deal with the
included documents. That structure only includes each child once.
We need to use position_to_children, instead.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@38842 a592a061-630c-0410-9148-cb99ea01b6c8
the macros declared in the parent do not work. This is because we were
cloning only the child, which then didn't have a parent.
The solution is to clone the whole structure, starting with the master
document. As a side effect, we only clone each child once.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@38837 a592a061-630c-0410-9148-cb99ea01b6c8
variable. This is done in the preferences, much like as the PATH prefix.
A single '.' in the paths will get replaced with the current document dir
and also non-absolute paths will be prefixed with that dir.
The default semantics of TEXINPUTS apply, such that, for example, if a
path is terminated with a double slash, all subdirectories will be also
searched by both the TeX engine and ancillary programs such as dvi
previewers or dvips. As an example, if the prefix is set to ".:figs", the
TEXINPUTS variable will be set as ".:<docdir>:<docdir>/figs:$ORIGTEXINPUTS",
where <docdir> is the document directory.
The initial '.' is necessary to address the actual current dir (this will
be the temp dir at preview time), while if TEXINPUTS was initially unset,
such that $ORIGTEXINPUTS is empty, a colon (or semicolon on Windows) will
end the path list. This is very important, because we don't want to replace
the system directories but to complement them and, in order to do that, an
empty element has to be present in the list. Indeed, according to the
TEXINPUTS semantics, an empty element means the standard search path.
This works whether TEXINPUTS is originally set or not, because if the
original TEXINPUTS starts with a colon (meaning that the standard search
path is wanted there) we will have an empty element at that point,
otherwise the final colon will simply serve as a path separator.
Of course, on Windows a ';' has to be used as a path separator. LyX will
take care of transforming the platform path list into one understandable
by the TeX engine. For example, this will be the case for a Cygwin version
of LyX using a native Windows TeX engine or viceversa. I tested all of
this and it works for me.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@38681 a592a061-630c-0410-9148-cb99ea01b6c8
inset to know that the BibTeX data had changed. So we introduce a
Buffer-wide variable that we can query for that information.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@38619 a592a061-630c-0410-9148-cb99ea01b6c8
calls into the file writing routines and out of doExport(). They were in
both places before: Called once in doExport, and then again in the e.g.
writeLaTeXSource()---and then again, actually, in validate().
It is possible this will reveal some missing updateBuffer() calls
somewhere. But it should somewhat speed up View>Source, since we now do
not do an extra set of such calls in that routine. Rather, we rely upon
the Buffer's having been made up to date first, by the updateBuffer()
call after dispatch.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@38596 a592a061-630c-0410-9148-cb99ea01b6c8
http://www.mail-archive.com/lyx-
for the reason it needs to be here.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@38497 a592a061-630c-0410-9148-cb99ea01b6c8
to be a set. Not that speed will really be an issue here, but....
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@38178 a592a061-630c-0410-9148-cb99ea01b6c8
as a whole gets highlighted. Now, the error list carries information
about the starting id/pos and ending pos, but not about the ending id.
So, when computing the range to be highlighted as range = pos_end - pos_start,
if id_start != id_end, the result 1 means one inset and only the first
character in the inset would be highlighted. Thus, when id_start != id_end,
let pos_end = 0, such that the whole content will be highlighted.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@37900 a592a061-630c-0410-9148-cb99ea01b6c8
child, the returned list had no master and twice the child itself).
(was causing misbehavior in Advanced Find & Replace with scope=Document).
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@37852 a592a061-630c-0410-9148-cb99ea01b6c8
at the same line. Given that we know where the error occurred, don't
unnecessarily check the master first.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@37846 a592a061-630c-0410-9148-cb99ea01b6c8
counting when exporting to latex. This is done for the code comprised
between \begin{document} and \end{document}, while the preamble code
still needs manual calls to TexRow::newline() for registering new lines.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@37584 a592a061-630c-0410-9148-cb99ea01b6c8
not release level. File format does not change for a single minor (branch), so
this info has small value.
On the other hand the first line of header is causing unnecessary merge
conflicts for users of LyX VCS.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@37579 a592a061-630c-0410-9148-cb99ea01b6c8
blank lines may be inadvertently output. This is achieved by using two
special iomanip-like variables (breakln and safebreakln) in the lyx::
namespace. When they are inserted in the stream, a newline is output
only if not already at the beginning of a line. The difference between
breakln and safebreakln is that, if needed, the former outputs '\n'
and the latter "%\n".
In future, the new class will also be used for counting the number of
newlines issued. Even if the infractrure for doing that is already in
place, the counting is essentially still done the old way.
There are still places in the code where the functionality of the
class could be used, most probably. ATM, it is used for InsetTabular,
InsetListings, InsetFloat, and InsetText.
The Comment and GreyedOut insets required a special treatment and a
new InsetLayout parameter (Display) has been introduced. The default
for Display is "true", meaning that the corresponding latex
environment is of "display" type, i.e., it stands on its own, whereas
"false" means that the contents appear inline with the text. The
latter is the case for both Comment and GreyedOut insets.
Mostly, the only visible effects on latex exports should be the
disappearing of some redundant % chars and the appearing/disappearing
of null {} latex groups after a comment or lyxgreyedout environments
(they are related to the presence or absence of a space immediately
after those environments), as well as the fact that math environments
are now started on their own lines.
As a last thing, only the latex code between \begin{document} and
\end{document} goes through the new class, the preamble being directly
output through odocstream, as usual.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@37360 a592a061-630c-0410-9148-cb99ea01b6c8
At the end escape for fsync would be the least hackish solution
but it needs somebody with ext4 to test with.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@37348 a592a061-630c-0410-9148-cb99ea01b6c8
and the converters is also used by the main thread (getStatus).
LyX.exe!lyx::Buffer::doExport
LyX.exe!lyx::Buffer::preview(
LyX.exe!std::tr1::_Pmf_caller3<
LyX.exe!std::tr1::_Pmf_caller3<
LyX.exe!std::tr1::_Callable_pmf<
LyX.exe!std::tr1::_Bind3<
LyX.exe!std::tr1::_Bind_base<
LyX.exe!lyx::frontend::GuiView::GuiViewPrivate::runAndDestroy<
LyX.exe!lyx::frontend::GuiView::GuiViewPrivate::previewAndDestroy(
LyX.exe!QtConcurrent::StoredFunctorCall3<
LyX.exe!QtConcurrent::RunFunctionTask(
QtCored4.dll!QThreadPoolThread::run(
QtCored4.dll!QThreadPrivate::start(
msvcr100d.dll!_callthreadstartex()
msvcr100d.dll!_threadstartex(void * ptd)
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@37292 a592a061-630c-0410-9148-cb99ea01b6c8
Using updateMacros() entails a performance hit when loading a document
with really a lot of macros. So, revert to the original strategy of
tracking macros at creation time. In order to also account for macros
defined in a child document, the child is now loaded by the include inset
at construction time instead of after the master has finished loading.
This strategy mimics what updateMacros() was accomplishing without
incurring in its drawbacks, such that loading time is practically
unchanged even with a thousand macros.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@36968 a592a061-630c-0410-9148-cb99ea01b6c8
updateBuffer() traversal. The reason is simple: InsetCitation needs
access to the BibTeX info to calculate its label. But we won't have it
until we get to the bibliography.
I don't think there is any way around that.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@36710 a592a061-630c-0410-9148-cb99ea01b6c8
to be passing the BiblioInfo structure around this way. (That's an old
holdover.) That lets us get rid of the non-const masterBibInfo() again.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@36697 a592a061-630c-0410-9148-cb99ea01b6c8
bibliography information in updateBuffer(), rather than doing a wholly
separate traversal. We still do a separate traversal in two cases, as a
full updateBuffer() call just isn't needed there.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@36696 a592a061-630c-0410-9148-cb99ea01b6c8
- With XeTeX/LuaTeX and tex fonts, we need to force the encoding to utf8-plain manually.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@36558 a592a061-630c-0410-9148-cb99ea01b6c8
Change its parameter type to support::FileName for convenience.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@36375 a592a061-630c-0410-9148-cb99ea01b6c8
In particular, it makes paragraph breaks generate single \n in latex output
when ParbreakIsNewline is true
This means that it is not necessary anymore to use newlines to break lines.
Plain paragraph breaks can be used instead, like is done now in ERT/Listings.
This is mainly aimed at sweave support.
lyx2lyx support courtesy of Richard Heck
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@36163 a592a061-630c-0410-9148-cb99ea01b6c8
Computes a hash value for the authors when using change tracking.
Text.cpp, BufferParams.h, Author.h:
Change unsigned int to int because the hash values can be negative.
lyx2lyx:
Allow to convert negative author_ids.
See also: r30756.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@36134 a592a061-630c-0410-9148-cb99ea01b6c8
Also move the saveCheckSum declaration to the section of functions involving reading/writing. And note that it should be made private.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@35925 a592a061-630c-0410-9148-cb99ea01b6c8
argument from that function. We are always saving the checksum for the
Buffer's file. The argument is a left-over from a time when we did the
wrong thing and saved it for e.g. the emergency file.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@35890 a592a061-630c-0410-9148-cb99ea01b6c8
