This method did access more CursorSlice than Text. It is only a setter for
CursorSlice with some bound checking. The new signature is
setPitPos(pit_type, pos_type).
Use the function support:truncateWithEllipsis() to shorten a docstring with
... at the end. Actually we use U+2026 HORIZONTAL ELLIPSIS instead of "..." when
automatically shortening strings. This is to be consistent with Qt's own
truncation and is much nicer on the screen.
This includes the bugs #9575 and #9572 regarding broken text elision in the
outliner.
Known issues (non-regressions):
* TocBackend::updateItem() should be rewritten to update all TOCs. (#8386)
* "..." should be replaced with … everywhere else on the interface (including
translation strings).
* We should prefer to rely on QFontMetrics::elidedText() to truncate strings
with an ellipsis whenever possible, or an equivalent for the buffer view
dependent on the font metrics. See the warning in src/support/lstrings.h.
This is for people who cannot grasp the superior conventions of emacs ;)
A new argument "partial" has been added to word-upcase, word-lowcase
and word-capitalize that restores the old emacs-like behavior.
The (x)emacs bindings are updated to use the "partial" argument, and
also to bind correctly M-u and M-l (M-c is unfortunately not
available).
Fixes bug #2826.
* Remove the UndoKind parameter in the general interface
* move recordUndoInset to Cursor
* remove one variant of Undo::recordUndo.
* get rid of Text::recUndo.
The only real user was Text::insertStringAsLine, but this got changed
in commit 2c7152ab.
While not other place did read the value, there is a side effect of
setAutobreakRow that merges exiting paragraphs. However, this is used
in two situations
* some constructors, where the inset is empty;
* InsetTabular::toggleFixedWidth, which actually contains itself some
code to merge paragraphs.
Therefore the member and all associated code can be removed safely.
The old scheme was:
* multiple insertions are undone by groups of 20
* multiple deletions are undone in one big block
The new scheme is to stop merging undo elements after 2 seconds of elapsed time.
Moreover, the merging of undo elements stops when the cursor has moved. Potentially, this could allow to remove many of the finishUndo() calls.
Fixes bug #9204.
Only the first paragraph in those sequences goes into the TOC, since the environment is merged.
This is needed to handle the forthcoming beamer environments properly in the outliner.
In the existing code for setting layout of pragraph parameters,
Text::undoSpan is used to "guess" which paragraphs should be saved in Undo.
With this patch the approach is more precise: before every explicit change
to a paragraph, a Cursor::recordUndo call is inserted. This is much more robust than trying to guess.
In particular, we do not look at depth changes at all, since they are now
handled in updateBuffer since #8159 has been fixed.
Text::outerFont looks recursively for paragraphs before the current one
which has a lower depth. If such a paragraph cannot be found, depthHook
and outerHook return the current paragraph. As such, we end up in an
infinite loop. So, if we find a par_depth that was the same as the
previous one, we apparently can't find a suitable paragraph and we should
quit the loop.
resetFontEdit(). The former is used for on-screen and export formatting,
and the latter is used for interactive editing.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@37761 a592a061-630c-0410-9148-cb99ea01b6c8
that also makes sure it doesn't do more work than it needs to do, by
limiting the size to 40 characters. Previously, InsetBranch::addToToc()
would have added a string representing the entire contents of the
branch! It's hard to imagine that having to recalculate that sort of
thing doesn't cause some problems with speed, especially in documents
with lots of notes and branches and such.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@36974 a592a061-630c-0410-9148-cb99ea01b6c8
We need to reject the changes in when copying from a fully deleted section.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@34583 a592a061-630c-0410-9148-cb99ea01b6c8
#6415
Enrico please verify that reverse dvi is fixed.
* Text and InsetText: create two private constructors and transfer some
initialisation code from InsetText.
* Paragraph: id generation is transfered to Text. May be transfered to
Buffer in the future, we'll see.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@32766 a592a061-630c-0410-9148-cb99ea01b6c8
Move isFullyDeleted() to static function in CutAndPaste.cpp.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@30956 a592a061-630c-0410-9148-cb99ea01b6c8
I also updated InsetMathMBox so that it remains compilable, even if not used.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@30940 a592a061-630c-0410-9148-cb99ea01b6c8
* allows the selection of a whole cell with shift+key
* shift-movement between empty cells with a single keystroke
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@28385 a592a061-630c-0410-9148-cb99ea01b6c8
So, when we have an older LyX file, it will look like this:
\begin_inset ERT
status open
\begin_layout Standard
this that
\end_layout
\end_inset
which is now invalid, because ERT uses only PlainLayout. So I had put some code into Text::readParToken, where the layout for a paragraph gets set as it is read:
if (par.forceEmptyLayout()) {
// in this case only the empty layout is allowed
layoutname = tclass.emptyLayoutName();
} else if (par.useEmptyLayout()) {
// in this case, default layout maps to empty layout
if (layoutname == tclass.defaultLayoutName())
layoutname = tclass.emptyLayoutName();
} else {
// otherwise, the empty layout maps to the default
if (layoutname == tclass.emptyLayoutName())
layoutname = tclass.defaultLayoutName();
}
This turns out not to work, because par.forceEmptyLayout() and par.useEmptyLayout() always return false here, because par.inInset() always returns a null pointer, because the paragraph's inset hasn't yet been set when Text::readParagraph() gets called from Text::read() gets called from InsetText::read(). The solution is to set the paragraph's inset when it is created, which means passing a pointer to the various read() routines along the way.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@23057 a592a061-630c-0410-9148-cb99ea01b6c8
* DocIterator as MacroPosition
* Iterative search for macro in scope until a visible one is found.
This include the ability to resolve macro inside nested text insets.
* Speed up macro lookups by factor 2: only getMacro(name) call, no
further hasMacro(name) call before
* Both way child/master support
* Correct macro scope for multi-paragraph environments
* Correct macro scope for multi-depth-paragraphs
* Buffer::updateMacros made const
* Update macros when loaded (of master and child)
* Do not remove too many braces when unfolding a macro. This could
lead to a data loss because the relationship between arguments of
macros can be mixed up if nested macros are unfold at once.
* Reduce dependencies to MetricsInfo in MathMacro
* Update macros when needed. Normally it's done just before doing
metrics. But in cases without a brace around some constructs (like
\left(bla\right)) there is some help needed.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@22241 a592a061-630c-0410-9148-cb99ea01b6c8
This is a continuation of r21128. This round fixes the "Word" movement
functions and LFUNS.
Behavior should remain unchanged by this fix.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@21244 a592a061-630c-0410-9148-cb99ea01b6c8
* Font::FontBits -> FontInfo
* Font::FONT_XXX -> all enums transfered to FontEnums.h and renamed to FontXxx
I've replaced Font uses with FontInfo were the language() member was not needed, basically all draw() and metrics methods. There's one problematic cases with InsetQuotes which I solved by taking the Buffer main language.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@21240 a592a061-630c-0410-9148-cb99ea01b6c8
