- (getLastCellInRow): fix crash when in first multirow row
- (TeXRow): do not output row separator in in last row (bug #7294).
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@37709 a592a061-630c-0410-9148-cb99ea01b6c8
- use pdflatex route for preview snippet generation if hyperref is used.
This works around a bug in hyperref and/or preview-latex via DVI route (bug #7303).
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@37696 a592a061-630c-0410-9148-cb99ea01b6c8
I guess this deserves to be sorted out better, because we are doing tricky things by deleted the object from itself.
Problem:
PreviewImage? has a member PreviewLoader?. PreviewImage::Impl::statusChanged() calls PreviewLoader::remove. PreviewLoader::Impl::remove removes a snippet from the cache. In the cache is a map of the snippet and a shared pointer to PreviewImage?. This means that removing the snippet from the cache, destroys the PreviewImage?. When we get back to PreviewImage::Impl::statusChanged() this will start to crash.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@37681 a592a061-630c-0410-9148-cb99ea01b6c8
This should have been done by qt, but we can override qt by adapting the style on the windows platform.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@37678 a592a061-630c-0410-9148-cb99ea01b6c8
This went in without discussion and is IMHO wrong (bug #7055 is invalid).
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@37676 a592a061-630c-0410-9148-cb99ea01b6c8
This was a similar problem as for bug #5796 in r30807. There I made sure that the position that is used for the context menu is set at mousepress. That was because also the cursor was set at mousepress and we want to get the context menu at the place where the mousebutton was pressed, and not where the mousebutton was released.
However, in this case, the position of the context menu is stored on mousepress, but we don't take into account that the cursor might move afterwards due to the DEPM.
So, the solution is not to save the position of the mouseclick, but to save the name of the context menu we requested.
PS. Perhaps we could save the cursor position, but this seems to work too.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@37669 a592a061-630c-0410-9148-cb99ea01b6c8
latex error occurs inside a table, the exact faulty table row is spotted.
However, if all cells of a table row are output on the same line, lyx is
not able to tell what cell caused the error and highlights the last cell
of the row. This patch allows to output each cell of a table on its own
line, such that the exact point where the error occurred can be highlighted.
Note that this is only done when exporting for preview, and in normal (nice)
exports everything goes as usual.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@37643 a592a061-630c-0410-9148-cb99ea01b6c8
If no initializer is specified for an object, and the object is of (possibly
cv-qualified) non-POD class type (or array thereof), the object shall be
default-initialized; if the object is of const-qualified type, the underlying
class type shall have a user-declared default constructor.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@37603 a592a061-630c-0410-9148-cb99ea01b6c8
a special phrase, simply export the segment as normal text. For other
uses of these methods, end_pos is -1, so the original behavior is unaltered.
This allows for finding properly the LyX, LaTeX and other special phrases
with Advanced Find, when ignore format is off.
This complements the other changes made to latex export methods, for
exporting to latex with a given final end position.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@37599 a592a061-630c-0410-9148-cb99ea01b6c8
An object or reference that is explicitly declared const
and neither explicitly declared extern nor previously declared
to have external linkage has internal linkage.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@37593 a592a061-630c-0410-9148-cb99ea01b6c8
err.pos_start > err.pos_end such that range == 0 and nothing
gets highlighted, even if the paragraph id is correct.
In this case, it is better to highlight everything.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@37586 a592a061-630c-0410-9148-cb99ea01b6c8
counting when exporting to latex. This is done for the code comprised
between \begin{document} and \end{document}, while the preamble code
still needs manual calls to TexRow::newline() for registering new lines.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@37584 a592a061-630c-0410-9148-cb99ea01b6c8
- refine biber support: parse blg file to get the bib file into the dependency table with biber.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@37581 a592a061-630c-0410-9148-cb99ea01b6c8
not release level. File format does not change for a single minor (branch), so
this info has small value.
On the other hand the first line of header is causing unnecessary merge
conflicts for users of LyX VCS.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@37579 a592a061-630c-0410-9148-cb99ea01b6c8
If fontspec is not found, the "Use non-TeX fonts" checkbox is disabled, and the tooltip hints at installing the package.
Also add fontspec to LaTeXConfig.lyx, documenting that v2 of the package is needed for LuaTeX support.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@37567 a592a061-630c-0410-9148-cb99ea01b6c8
just by their file-name, and directly accessed there.
All string/latex exporting of those buffers is handled on the Model
side (lyxfind.cpp) according to the selected options.
Fixed bugs when searching with ignore-format disabled material
in the middle of a paragraph, and when using regular expressions.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@37549 a592a061-630c-0410-9148-cb99ea01b6c8
This was no oversight but a security concern. We do not want the LyX document to define arbitrary index and bibtex converters.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@37478 a592a061-630c-0410-9148-cb99ea01b6c8
* GuiIndices.cpp:
- allow custom processor setting per document. The missing UI was an oversight.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@37459 a592a061-630c-0410-9148-cb99ea01b6c8
IsPredefined.
The point of this is that the current tag is doing both of these jobs,
and they are different. The achemso class shows this, since it uses
float.sty to define three different kinds of floats internally. We have
to set NeedsFloatPkg to false to prevent LyX from trying to redefine
them, but then we complain that there is no list command defined and so
do not enter it in Insert>List/TOC.
The new tag is not yet functional, just there.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@37430 a592a061-630c-0410-9148-cb99ea01b6c8
if a float writes to the same auxfile as an existing float. E.g., in the
aguplus classes, we have a plate float that writes to lof and so is just
treated as a figure, for TOC purposes.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@37427 a592a061-630c-0410-9148-cb99ea01b6c8
ListCommand without our writing it to the menu twice. There's a minor
annoyance, which is that we always take the list name from the first
declaration of the Float, but it's not clear whether this is a real
issue.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@37424 a592a061-630c-0410-9148-cb99ea01b6c8
and added selection of entire find/replace WAs when switching
among them on Tab/Alt+Tab.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@37413 a592a061-630c-0410-9148-cb99ea01b6c8
- go back to Maping=tex-text for XeTeX and use Ligatures=TeX only for LuaTeX.
This gets users of older distributions (such as TeXLive 2009) back into the XeTeX game.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@37402 a592a061-630c-0410-9148-cb99ea01b6c8
all types requiring the exact same code, as suggested by Tommaso.
This allows to simply add a single-line instantiation declaration
if there's the need of adding another type requiring the same code.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@37366 a592a061-630c-0410-9148-cb99ea01b6c8
blank lines may be inadvertently output. This is achieved by using two
special iomanip-like variables (breakln and safebreakln) in the lyx::
namespace. When they are inserted in the stream, a newline is output
only if not already at the beginning of a line. The difference between
breakln and safebreakln is that, if needed, the former outputs '\n'
and the latter "%\n".
In future, the new class will also be used for counting the number of
newlines issued. Even if the infractrure for doing that is already in
place, the counting is essentially still done the old way.
There are still places in the code where the functionality of the
class could be used, most probably. ATM, it is used for InsetTabular,
InsetListings, InsetFloat, and InsetText.
The Comment and GreyedOut insets required a special treatment and a
new InsetLayout parameter (Display) has been introduced. The default
for Display is "true", meaning that the corresponding latex
environment is of "display" type, i.e., it stands on its own, whereas
"false" means that the contents appear inline with the text. The
latter is the case for both Comment and GreyedOut insets.
Mostly, the only visible effects on latex exports should be the
disappearing of some redundant % chars and the appearing/disappearing
of null {} latex groups after a comment or lyxgreyedout environments
(they are related to the presence or absence of a space immediately
after those environments), as well as the fact that math environments
are now started on their own lines.
As a last thing, only the latex code between \begin{document} and
\end{document} goes through the new class, the preamble being directly
output through odocstream, as usual.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@37360 a592a061-630c-0410-9148-cb99ea01b6c8
If an optional argument can be followed by another one, we need to use
getFullOpt(). Otherwise it would not be possible to parse \foo[][bar].
Remove getOptContent to avoid confusion (it does exactly the same as
getArg('[', ']') which is used in most places.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@37354 a592a061-630c-0410-9148-cb99ea01b6c8
At the end escape for fsync would be the least hackish solution
but it needs somebody with ext4 to test with.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@37348 a592a061-630c-0410-9148-cb99ea01b6c8
This paves the way for having a shortcut for buffer-view and buffer-update
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@37338 a592a061-630c-0410-9148-cb99ea01b6c8
* in converters, make sure that $$p and $$r are slash-terminated paths (like in viwers, BTW)
* pass the full intput path to lyxsweave.R
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@37337 a592a061-630c-0410-9148-cb99ea01b6c8
(when replacing text which is longer than the replaced contents in math mode and similar).
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@37335 a592a061-630c-0410-9148-cb99ea01b6c8
with this sequence:
-) C-N (new doc)
-) C-S-f (open advanced find dialog)
-) Alt-Tab (switch to other application)
-) Alt-Tab (switch back to LyX)
the focus now is on the main document WA. I think it should be back on the Find WA where I was before the Alt-Tab.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@37334 a592a061-630c-0410-9148-cb99ea01b6c8
The quick solution is to output a % sign before \n. The better one
would be doing as in mathed, but it is not so straightforward.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@37320 a592a061-630c-0410-9148-cb99ea01b6c8
Actually, this was an oversight in r33226. There is no need to touch the physical cursor in this method.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@37310 a592a061-630c-0410-9148-cb99ea01b6c8
Try to recognize modules.
Again, this is needed because the complete LyX preamble is ignored.
It is not possible to recognize a module in all cases, but at least the simple
ones are handled now. As a prerequisite I also had to revive the filling of
known_environments. This has been removed (probably by accident) some time ago.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@37306 a592a061-630c-0410-9148-cb99ea01b6c8
- translate the arguments of \texorpdfstring, so that the floating footnote
code gets enabled
- honor the ForcePlainLayout flag of insets like the Index inset
- remove hardcoded \url support, this is handled by the general Flex inset code
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@37297 a592a061-630c-0410-9148-cb99ea01b6c8
and the converters is also used by the main thread (getStatus).
LyX.exe!lyx::Buffer::doExport
LyX.exe!lyx::Buffer::preview(
LyX.exe!std::tr1::_Pmf_caller3<
LyX.exe!std::tr1::_Pmf_caller3<
LyX.exe!std::tr1::_Callable_pmf<
LyX.exe!std::tr1::_Bind3<
LyX.exe!std::tr1::_Bind_base<
LyX.exe!lyx::frontend::GuiView::GuiViewPrivate::runAndDestroy<
LyX.exe!lyx::frontend::GuiView::GuiViewPrivate::previewAndDestroy(
LyX.exe!QtConcurrent::StoredFunctorCall3<
LyX.exe!QtConcurrent::RunFunctionTask(
QtCored4.dll!QThreadPoolThread::run(
QtCored4.dll!QThreadPrivate::start(
msvcr100d.dll!_callthreadstartex()
msvcr100d.dll!_threadstartex(void * ptd)
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@37292 a592a061-630c-0410-9148-cb99ea01b6c8
parser discards all needed packages like calc.sty or framed.sty, so the
resulting document would be uncompilable with those boxes as ERT.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@37287 a592a061-630c-0410-9148-cb99ea01b6c8
