Now backspace and delete in text will select non-empty math and text insets
before deleting them. This is consistent with what happens in math already.
This is implemented for InsetText as well but can be disabled in case of
negative feedback.
This can be set for any sort of inset with the new virtual method
Inset::confirmDeletion.
New option "force" for the LFUN_*_DELETE_* commands, that bypasses the
confirmDeletion check.
Since in InsetMathNest::cursorPos we do not know what is the value of
the row element before value of a given BOX, it does not make sense to
set the cursor at a given offset from the start of the MathData
object.
Therefore here we set the cursor in the middle of the MathData object,
which unfortunately may or may not be visually centered wrt the BOX.
The best solution would be to use the MathRow data here, but
unfortunately this is not completely trivial.
This patch replaces 7917ebcc4.
Following discussion on the list:
https://www.mail-archive.com/lyx-users@lists.lyx.org/msg103012.html
This defines a new behaviour for Ctrl[+Shift]+Arrow in math:
* Left/Right does not enter insets
* Left/Right jump groups of insets that have the same math class ("words")
* Enable Up/Down for consistency.
This helper method is used to set the inset position cache at drawing
time. However this is already done by the drawing code itself
(MathRow::draw, RowPainter::paintInset), so that there is no need to
do this same work again in a different place.
Note that the inset positions are still set in InsetTabular::draw for
each cell.
This commit comes with a mild risk attached (it might be that some of
these calls were useful after all!), but all of this is fixable.
It should be now possible underlining or striking out any kind
of math inset containing any math construct indigestible to ulem.
While this was already possible for inline math insets, they could
have break if an aligned environment was used, for example.
This is now possible also for diplay math. Even if this can be
nonsensical and not visually perfect, at least no latex errors
should be generated if one tries to.
Showing deleted display math by enabling "Show Changes in Output" was
only possible with dvi (through dvipost). Although LyX strikes out
such formulas on screen, it was impossible obtaining an output
directly using pdflatex (or other engines producing pdf) because
ulem cannot cope with display math material and gives errors.
The solution is to strike out by ourselves such deleted formulas.
I took into account several options. One of them would produce
an output similar to dvipost (which strikes out each element), but
would have required much more changes in the output routines.
Eventually, I opted for using tikz, which gives a more clean
output (as it requires to simply adding a preamble and a postamble
to the latex code of any displayed math, instead of a mark up
tailored to each particular math construct). The look of the pdf
output is similar to the way LyX strikes out the equations on screen.
The main thing it does is integrate mouse-modifiers into the
FuncRequest machinery. Previously, these had to be passed
separately, which led to some ugly function signatures.
There was also an unnecessary form of the constructor, which
can now be removed.
No change of behavior is intended.
The only exceptions are:
- The purpose of the header is to drag in the used symbol, e.g. unique_ptr.h
- The used symbol is inside a class or a namespace other than lyx
The reason for this is that global 'using' statements effectively forbid to
use the used symbols in any other namespace in the whole program, since simply
adding or removing an #include of the corresponding header subtly changes the
name lookup. The namespace lyx is sort of global, so it should not have these
statements either.
Replace the manual manipulation of a stack of RowEntries with a Changer
function. When I introduced the stack of RowEntries, I did not know about the
Changer mechanism.
The old name would be confusing wrt setSelection(), which does additional checks.
This one is a pure acessor, and the more complete methods are
* setSelection(), which avoids empty selections
* clearSelection(), which resets anchor, and sets word selection and mark more to false.
Most of the code should use these two instead of selection(bool), but this is for later.
WriteStream is now built from an otexstream instead of an odocstream, and
therefore counts lines in a TexRow. Calls to TexRow are added in relevant places
in math insets.
This finishes adding line tracking for math in the source panel and for forward
search.
The functions reverseDirectionNeeded() and reverseDirectionNeeded() do
not rely on the Bidi class. The first one is changed into a Cursor
method, and the second one is replaced with explicit code.
We have some math macros that exist only because LyX can display them easily,
but which require user preamble code. These commands should not appear in
autocompletion, they are only there to make the formulas of users who actually
need thgese symbols and know what to put into the preamble more beautiful.
The math icons for the symbol image in the math completer were hardcoded to the
command names. This is wrong for some icons for various reasons, e.g. the case
insensitivity of windows file systems. Therefore we have to use the replacement
list which is also used for the toolbar icons. Bug #3538 is not closed because
of this problem, but IMHO it has nothing to do with this bug, it is a more
general one.
The problem was that the conversion to plain text (which is used as an
intermediate step) requires for some insets a valid buffer pointer, but
insets in the cut stack do not have one. Now we use the same temp buffer
business as for copying to the external clipboard.
There are 3 possible actions (in order)
* select current cell
* select all calls of inset
* select the inset from outside (in the containing inset)
This fixes completely #7727.
* remove unused class TexStream.
* remove unused virtual method Inset::cellXOffset
* remove second argument of FileDialog constructor, which was actually
not used
* remove some dead local code
* remove some unused private members of classes
* in InsetMathNest::updateBuffer, fix the logic of a test
Now interactive insertion of \smash[t] and \smash[b] is possible again.
\smash with optional argument behaves now exactly as in LyX 2.0.x, and without
optional argument it is supported by InsetMathPhantom.
each failure.
There are several places I was not sure what to do. These are marked
by comments beginning "LASSERT:" so they can be found easily. At the
moment, they are at:
Author.cpp:105: // LASSERT: What should we do here?
Author.cpp:121: // LASSERT: What should we do here?
Buffer.cpp:4525: // LASSERT: Is it safe to continue here, or should we just return?
Cursor.cpp:345: // LASSERT: Is it safe to continue here, or should we return?
Cursor.cpp:403: // LASSERT: Is it safe to continue here, or should we return?
Cursor.cpp:1143: // LASSERT: There have been several bugs around this code, that seem
CursorSlice.cpp:83: // LASSERT: This should only ever be called from an InsetMath.
CursorSlice.cpp:92: // LASSERT: This should only ever be called from an InsetMath.
LayoutFile.cpp:303: // LASSERT: Why would this fail?
Text.cpp:995: // LASSERT: Is it safe to continue here?
As discussed on the list. No automatic contents detection is done, the user
needs to use the special paste menu instead. I used the new TempFile class
for safe temporary file handling.
The documentation would go into section 2.2 of UserGuide.lyx, but I am not
allowed to edit that document.
The fix is basically mechanical, the additional code for fraction like insets
with three arguments was stolen from \unitfrac. As any math package,
stackrel.sty needs a buffer parameter to switch it off.
I also added the two stackrel flavours to the toolbar.
While cppcheck did not turn out any suspicious error messages, using
the "performance" flag highlighted several nitpicks in three categories
* do not use it++ for iterators, ++it is better
* do not use size() to test for emptyness, empty() is here
* do not use "const T" as a function parameter, "const & T" is better
I doubt that any of these is a real performance problem, but the code is cleaner anyway.
* Avoid undo step when using backspace in macro mode
* Use recordUndoInset when entering macro mode (if one enters something like \hline, the outer inset itself will be modified)
* Use recordUndoInset when pasting in an INsetMathGrid (same reason as above)
If \hline is entered, do not create an unknown inset, but increase the number
of hlines of the current row if that is allowed. The same idea is applied to
copy-paste (not part of the bug report).
This is also a test for committing via git.
changing limits status (fixes bug #8007)
* InsetMathScript::getStatus (new) : handle properly status for LFUN_MATH_LIMITS here, along with checkmark support for the menu)
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@40700 a592a061-630c-0410-9148-cb99ea01b6c8
- Interpret argument of LFUN_SPACE_INSERT correctly
- Use InsetMathSpace instead of InsetMathSpecialChar for "\ " (bug # 7728)
- Use InsetMathSpace instead of InsetMathChar for ~ (bug # 7728).
This fixes also the display in LyX (previously a literal ~ was displayed).
Using InsetMathSpace enables also the "Insert Formatting" menu entries.
No file format change is needed, since the LaTeX export is unchanged.
Note that there are still some bugs related to spaces in math:
#7746, #7747, #7749, #7842
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@39947 a592a061-630c-0410-9148-cb99ea01b6c8
Added corresponding regression tests findadv-re-01 and -02 for finding these special characters.
Unfortunately, braces {} are a little bit special and don't work yet. Added findadv-re-03 regression test to not forget about this case.
This goes along the line of fixing issues reported by Andrew Parsloe and summarised as #7638.
Last note: Still there will be cases when the Advanced F&R won't work, especially if the text to be found and/or the search pattern is preceded by backslashes or others.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@39135 a592a061-630c-0410-9148-cb99ea01b6c8
assure to switch to math mode if needed. This helps avoiding latex
errors (see http://thread.gmane.org/gmane.editors.lyx.general/69580)
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@38579 a592a061-630c-0410-9148-cb99ea01b6c8
Two things have been fixed here:
1) the selection should not be cleared when the user right clicks a math inset that is part of the selection,
2) the type of context menu should be determined at mouse-press, because that is the moment when the cursor is set. However, we should do it after setting the cursor, because setting the cursor might change the selection status and this influences the choice for the type of context menu.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@37961 a592a061-630c-0410-9148-cb99ea01b6c8
Currently, if an inset outputs a newline, the new latex row is still
associated with a previous id/pos. Now, if a latex error occurs before
this newline, we would still highlight everything associated to that
id/pos, even if it is extraneous to the error.
This is avoided by associating the new latex row with the id/pos in
effect right before entering the inset. If an inset does not output
a newline, it is not excluded from the selection, consistent with the
fact that the text of the inset does appear in the error description.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@37903 a592a061-630c-0410-9148-cb99ea01b6c8
counting when exporting to latex. This is done for the code comprised
between \begin{document} and \end{document}, while the preamble code
still needs manual calls to TexRow::newline() for registering new lines.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@37584 a592a061-630c-0410-9148-cb99ea01b6c8
blank lines may be inadvertently output. This is achieved by using two
special iomanip-like variables (breakln and safebreakln) in the lyx::
namespace. When they are inserted in the stream, a newline is output
only if not already at the beginning of a line. The difference between
breakln and safebreakln is that, if needed, the former outputs '\n'
and the latter "%\n".
In future, the new class will also be used for counting the number of
newlines issued. Even if the infractrure for doing that is already in
place, the counting is essentially still done the old way.
There are still places in the code where the functionality of the
class could be used, most probably. ATM, it is used for InsetTabular,
InsetListings, InsetFloat, and InsetText.
The Comment and GreyedOut insets required a special treatment and a
new InsetLayout parameter (Display) has been introduced. The default
for Display is "true", meaning that the corresponding latex
environment is of "display" type, i.e., it stands on its own, whereas
"false" means that the contents appear inline with the text. The
latter is the case for both Comment and GreyedOut insets.
Mostly, the only visible effects on latex exports should be the
disappearing of some redundant % chars and the appearing/disappearing
of null {} latex groups after a comment or lyxgreyedout environments
(they are related to the presence or absence of a space immediately
after those environments), as well as the fact that math environments
are now started on their own lines.
As a last thing, only the latex code between \begin{document} and
\end{document} goes through the new class, the preamble being directly
output through odocstream, as usual.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@37360 a592a061-630c-0410-9148-cb99ea01b6c8
inset-insert simply swallows the selection, while box-insert, note-insert etc.
put the selection inside the new inset.
As a side effect the toolbar icons get better names, as requested by Uwe.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@36451 a592a061-630c-0410-9148-cb99ea01b6c8
A dynamic_cast is necessary when:
- the object to be casted is from an external library because we can't add Qxxx::asXxxx() to Qt e.g.:
* QAbstractListModel to GuiIdListModel,
* QValidator to PathValidator,
* QWidget to TabWorkArea,
* QWidget to GuiWorkArea;
- the object is to be casted from an interface to the implementing class, because the Interface does not know by whom it is implemented:
* ProgressInterface to GuiProgress,
* Application to GuiApplication.
A dynamic_cast can be replaced by:
- already existing as***Inset() functions, e.g.:
* asHullInset(),
* asInsetMath()->asMacro(),
* asInsetText();
- a static_cast when we are sure this can't go wrong, e.g.:
* we are sure that CellData::inset->clone() is an InsetTableCell,
* in cases where we explicitly check it->lyxCode().
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@35855 a592a061-630c-0410-9148-cb99ea01b6c8
DispatchResult to store a flag that tells us whether we need a buffer
update or not.
So: If you find a missing one, go to an appropriate place in the
dispatch and call cur.forceBufferUpdate() or, if you don't have a cursor
but do have a DispatchResult, call dr.forceBufferUpdate().
There is one remaining call I could not move, in
TextMetrics::redoParagraph. But this looks like an emergency call when
the macro context has not been set. There are also a couple calls that
are connected with buffer creation that I commented out, since the same
call is done again almost immediately. But I'm not positive about those.
Now the nice thing would be to do the same for updateMacros().
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@34826 a592a061-630c-0410-9148-cb99ea01b6c8
This is also in preparation of a decent fix for bug #3900.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@34347 a592a061-630c-0410-9148-cb99ea01b6c8
- proper message passing for all tabular features
- properly define which feature needs an argument
* replace LFUN_TABULAR_FEATURE with LFUN_INSET_MODIFY
- The math tables are also affected. In the future a common base class
between math and text table will solve this inconsistency.
- There is a hack in GuiApplication in order to not rename the toolbar
icons. This will have to be cleaned up with a general icon naming for
LFUN_INSET_MODIFY... to be discussed.
* Tabular Dialog:
- big cleanup, lots and lots of bug fixing here
- migrated to InsetParamsWidget
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@33495 a592a061-630c-0410-9148-cb99ea01b6c8
a lot of simplification is possible. Except some instability period...
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@33389 a592a061-630c-0410-9148-cb99ea01b6c8
This fixes bug #1560.
The diverse setBuffer / updateLabels calls need auditing. See FIXMEs.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@33249 a592a061-630c-0410-9148-cb99ea01b6c8
Math manual loads and save correctly it seems but expect some instability period.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@31898 a592a061-630c-0410-9148-cb99ea01b6c8
This patch initializes the buffer_ member of a MathHull inset in most
(but not all) cases. The problems with buffer_ should be greatly
allievated now, but there still can be some corner case.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@31873 a592a061-630c-0410-9148-cb99ea01b6c8
* MathStream{.cpp, h}:
- replace bool dryrun() by enum output that also knows whether the stream is for instant preview
* InsetMathHull.cpp:
- tell the stream whether we use it for instant preview.
* MathString.cpp (write):
- gracefully catch encoding exception for instant preview.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@30895 a592a061-630c-0410-9148-cb99ea01b6c8
introduces a new LFUN and fixes#4620
This can in principle also go to branch when new LFUNs are there allowed, Jürgen?
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@30523 a592a061-630c-0410-9148-cb99ea01b6c8
