Use the function support:truncateWithEllipsis() to shorten a docstring with
... at the end. Actually we use U+2026 HORIZONTAL ELLIPSIS instead of "..." when
automatically shortening strings. This is to be consistent with Qt's own
truncation and is much nicer on the screen.
This includes the bugs #9575 and #9572 regarding broken text elision in the
outliner.
Known issues (non-regressions):
* TocBackend::updateItem() should be rewritten to update all TOCs. (#8386)
* "..." should be replaced with … everywhere else on the interface (including
translation strings).
* We should prefer to rely on QFontMetrics::elidedText() to truncate strings
with an ellipsis whenever possible, or an equivalent for the buffer view
dependent on the font metrics. See the warning in src/support/lstrings.h.
Newer boost versions use complicated type traits for boost::next and
boost::prior, which do not work with the RandomAccessList iterators.
The long term solution is to use std::next and std::prev, for now supply
simple replacements for compilers that do not support C++11 yet.
The problem was that the conversion to plain text (which is used as an
intermediate step) requires for some insets a valid buffer pointer, but
insets in the cut stack do not have one. Now we use the same temp buffer
business as for copying to the external clipboard.
BufferParams::setDocumentClass() deletes the old document class of the buffer
and creates a copy of the new one. Therefore, the stored layout pointers in
the paragraphs (actually only one paragraph exists) are dangling afterwards.
Resetting them before setting the document class helps here.
In the long term we need to get rid of BufferParams::setDocumentClass()
completely, this is very ugly.
What a selection spans several cells in mathed, and a deletion occurs though LFUN_CHAR_DELETE_FORWARD for example, only the case of a proper grid was handled. When no such grid exists, all cells between the first and the last index are cleared now.
Investigation of bug #9236 showed that crash to be due to a Paragraph's
holding a dangling pointer to an old and deleted Layout after the
DocumentClass was reset. Since the backtraces look almost identical, it
seems likely that we have the same problem here.
Since this crash seems almost always to involve tables, I looked at the
code in switchBetweenClasses() and found that the Paragraphs that belong
to "hidden" table cells are not seen by the initial recursion using a
ParIterator: It skips right over them. This was confirmed by test code
suggested by Enrico, with results reported in Trac.
The present patch attempts to deal with this problem in the second
recursion, over Insets. When we see an InsetTabular, we call a new
routine that recurses through the cells, looking for hidden ones. If it
finds a hidden one, it then resets the Layout for the cell's Paragraphs
(there should be only one, but we do not make any assumptions) to the
PlainLayout that belongs to the new DocumentClass. This is good enough,
since such cells never have content.
There is extensive discussion of the patch here:
https://www.mail-archive.com/lyx-devel@lists.lyx.org/msg185095.html
Additional testing by Enrico and me confirmed the existence of the
dangling pointer.
FileName::tempName() created a new temp file name by using qt to create a
temporary file with a unique name, and then deleting that file and returning
the name. This was unsafe, since other processes or even other threads of the
running LyX could create files with the same name between deletion and then
using the temp name.
This is fixed by using the TempFile class instead. As a side effect, a few
cases where the temp files were not deleted after usage were fixed as well.
The only place that is still unsafe is createTmpDir().
for possible thread conflicts, of the sort Georg resolved at
6a30211f. I have made static variables const where possible,
and marked cases that looked potentially problematic with the
comment:
// FIXME THREAD
Many of these definitely are vulnerable to concurrent access, such
as the static variables declared at the start of output_latex.cpp.
Suppose, e.g., we were outputting latex and also displaying the
source of a different document.
I'd appreciate it if others could grep for "FIXME THREAD" and see
if some of these are harmless, or what.
This was an obvious thinko: When pasting a paragraph list the depth of the
pasted paragraphs need to be adjusted, so that no paragraph has a negative
depth afterwards. However, the maximum allowed depth was only adjusted after
the second and following pasted paragraphs. Since the computed value was only
used for the subsequent paragrph this meant that the second paragraph did
still use the same maximum allowed depth as the first one, which came from the
paragraph the text as pasted into. This was wrong e.g. in case the outside
paragraph was a standard paragraph (max_depth = 0), and the first pasted
paragraph was an enumeration (max_depth = 1). Therefore, max_depth needs to
be adjusted also after the first pasted paragaph. Since the adjustment is
done aftre max_depth was used for the current paragraph the condition
mentioned in the comment is still met.
The new HTML clipboard export could cause error message boxes on copying
data to the clipboard (bug #8866). These are now suppressed, like all other
errors which might occur for preparing the clipboard data.
If we call tex2lyx on a temporary file created from the clipboard, the
file is always in utf8 encoding, without any temporary changes, even if it
contains encoding changing LaTeX commands. Therefore, we must tell tex2lyx
to use a fixed utf8 encoding for the whole file, and this is done using the
new latexclipboard format. Previously, tex2lyx thought the encoding was
latin1.
As a side effect, the -e option is now also documented in the man page.
I introduced a regression in c14b9e67 for pasting images:
If an image is on the clipboard both as PNG and HTML with just an url,
but no plain text, pasting would fail. The reason for this was that
text contents was detected (the HTML code), nd preferred, but actually
pasting it resulted in an empty string, since the HTML import could not
handle the url This error was not checked.
The solution is first to try text paste if both text and image content
is present, and then try image paste if the text failed.
each failure.
There are several places I was not sure what to do. These are marked
by comments beginning "LASSERT:" so they can be found easily. At the
moment, they are at:
Author.cpp:105: // LASSERT: What should we do here?
Author.cpp:121: // LASSERT: What should we do here?
Buffer.cpp:4525: // LASSERT: Is it safe to continue here, or should we just return?
Cursor.cpp:345: // LASSERT: Is it safe to continue here, or should we return?
Cursor.cpp:403: // LASSERT: Is it safe to continue here, or should we return?
Cursor.cpp:1143: // LASSERT: There have been several bugs around this code, that seem
CursorSlice.cpp:83: // LASSERT: This should only ever be called from an InsetMath.
CursorSlice.cpp:92: // LASSERT: This should only ever be called from an InsetMath.
LayoutFile.cpp:303: // LASSERT: Why would this fail?
Text.cpp:995: // LASSERT: Is it safe to continue here?
This speeds up the copying, and although not many applications understand
MathML currently (MS word is supposed to understand it), their number should
go up in the future.
As discussed on the list. No automatic contents detection is done, the user
needs to use the special paste menu instead. I used the new TempFile class
for safe temporary file handling.
The documentation would go into section 2.2 of UserGuide.lyx, but I am not
allowed to edit that document.
The HTML export is now mature enough so that it can be used to transfer
formatted text to the clipboard. This enhances interoperability e.g. with
office applications.
For some unknown reason, the paste code likes to call Cursor::setSelection(), which is not appropriate here since we are not trying to set a selection at this point.
objects. The problem that led to the leak is that these objects can be held in
memory long after the Buffer that created them is gone, mostly due to their
use in the CutStack. So they were previously held in a storage facility, the
DocumentClassBundle. Unfortunately, they were now being created too often,
especially by cloning. It's not really a leak, because they're accessible, but
we weren't ever destroying them.
This new approach uses a shared_ptr instead.
Thanks to Vincent for pointing out const_pointer_cast.
While cppcheck did not turn out any suspicious error messages, using
the "performance" flag highlighted several nitpicks in three categories
* do not use it++ for iterators, ++it is better
* do not use size() to test for emptyness, empty() is here
* do not use "const T" as a function parameter, "const & T" is better
I doubt that any of these is a real performance problem, but the code is cleaner anyway.
If no mask is supplied or the mask is attached to the end of the filename, we end up with unexpected names like
<system-temp-dir>\lyx_tmpdir.qHp780.vcr780_<mask>
instead of a temporary file in the lyx temporary directory like
<system-temp-dir>\lyx_tmpdir.qHp780\<mask>.vcr780.
This is a patch from Scott Kostyshak. The problem it solves is as follows:
1. enable continuous spell check.
2. type a misspelled word and press space so that it has a wavy red underline.
3. right-click and choose a suggested replacement word.
4. press the backspace button.
Result: nothing happens. If you press the backspace button again, then it works as normal.
The selection code was added for the benefit of the spellchecker, but the code has been rewritten since then.
Documentation (and perhaps menu items) need still to be a bit
clarified in order to distinguish the various paste options
for the average user.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@40060 a592a061-630c-0410-9148-cb99ea01b6c8
* uniqueLabel(docstring & label) to enforce label unicity
* updateLabel() to update only the label.
* InsetLabel::updateLabelAndRefs() to update label & refs
* InsetLabel::updateReferences() to update the references
This fixes bug #7655
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@39250 a592a061-630c-0410-9148-cb99ea01b6c8
It's amazing we haven't seen problems with this before. The basic problem is that buf.errorList("whatever") would always return the same global, static error list, if it did not already exist. So, to a significant extent, there was only one global error list!
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@38978 a592a061-630c-0410-9148-cb99ea01b6c8
preparatory to fixing #7080. Note that mathed uses the same routine, but
for a completely different purpose, so I did not rename it there. I have
seen no difference in behavior after testing, e.g., opening and
exporting Math.lyx, and also re-saving it and looking at the diff.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@38109 a592a061-630c-0410-9148-cb99ea01b6c8
After a cut operation, we need to make sure that the Buffer is updated
because some further operation will need updated label information for
example. So we cannot just use "cur.forceBufferUpdate()" here.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@36731 a592a061-630c-0410-9148-cb99ea01b6c8
In particular, it makes paragraph breaks generate single \n in latex output
when ParbreakIsNewline is true
This means that it is not necessary anymore to use newlines to break lines.
Plain paragraph breaks can be used instead, like is done now in ERT/Listings.
This is mainly aimed at sweave support.
lyx2lyx support courtesy of Richard Heck
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@36163 a592a061-630c-0410-9148-cb99ea01b6c8
Now the path to the pasted graphics is saved as a relative path if possible.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@36058 a592a061-630c-0410-9148-cb99ea01b6c8
A dynamic_cast is necessary when:
- the object to be casted is from an external library because we can't add Qxxx::asXxxx() to Qt e.g.:
* QAbstractListModel to GuiIdListModel,
* QValidator to PathValidator,
* QWidget to TabWorkArea,
* QWidget to GuiWorkArea;
- the object is to be casted from an interface to the implementing class, because the Interface does not know by whom it is implemented:
* ProgressInterface to GuiProgress,
* Application to GuiApplication.
A dynamic_cast can be replaced by:
- already existing as***Inset() functions, e.g.:
* asHullInset(),
* asInsetMath()->asMacro(),
* asInsetText();
- a static_cast when we are sure this can't go wrong, e.g.:
* we are sure that CellData::inset->clone() is an InsetTableCell,
* in cases where we explicitly check it->lyxCode().
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@35855 a592a061-630c-0410-9148-cb99ea01b6c8
This also fixes compilation again. I forgot to cherry-pick all commits in git ;)...
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@35845 a592a061-630c-0410-9148-cb99ea01b6c8
DispatchResult to store a flag that tells us whether we need a buffer
update or not.
So: If you find a missing one, go to an appropriate place in the
dispatch and call cur.forceBufferUpdate() or, if you don't have a cursor
but do have a DispatchResult, call dr.forceBufferUpdate().
There is one remaining call I could not move, in
TextMetrics::redoParagraph. But this looks like an emergency call when
the macro context has not been set. There are also a couple calls that
are connected with buffer creation that I commented out, since the same
call is done again almost immediately. But I'm not positive about those.
Now the nice thing would be to do the same for updateMacros().
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@34826 a592a061-630c-0410-9148-cb99ea01b6c8
We need to reject the changes in when copying from a fully deleted section.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@34583 a592a061-630c-0410-9148-cb99ea01b6c8
a lot of simplification is possible. Except some instability period...
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@33389 a592a061-630c-0410-9148-cb99ea01b6c8
This fixes bug #1560.
The diverse setBuffer / updateLabels calls need auditing. See FIXMEs.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@33249 a592a061-630c-0410-9148-cb99ea01b6c8
Math manual loads and save correctly it seems but expect some instability period.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@31898 a592a061-630c-0410-9148-cb99ea01b6c8
I know that Inset has a buffer, but we should be careful when handling Insets in CutAndPaste, these don't always have a buffer. Besides, we are in the function switchBetweenClasses(oldone, newone). Then it's pretty strange to ask the flex inset whether it is defined in its buffer->textclass, while we have an explicit new textclass defined.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@31223 a592a061-630c-0410-9148-cb99ea01b6c8
Move isFullyDeleted() to static function in CutAndPaste.cpp.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@30956 a592a061-630c-0410-9148-cb99ea01b6c8
accepting changes in a clipboard copy (CutAndPaste.cpp), we set the buffer
of insets (and we reset them later).
Doing this makes sense because we know this is the only operation on these
out-of-document paragraphs that will require access to a buffer.
Also, this commit gets rid of one explicit test against ERT_CODE and
LISTING_CODE.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@30623 a592a061-630c-0410-9148-cb99ea01b6c8
* on paste, ask if unknown branches shall be added to the branch list
(entails new LFUN_BRANCH_ADD)
* add a list of undefined branches to the buffer and the GUI
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@30419 a592a061-630c-0410-9148-cb99ea01b6c8
So, we only clear the dirty_tabular_stack_ flag when a 'real' copy to clipboard has been made.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@29717 a592a061-630c-0410-9148-cb99ea01b6c8
Do not accept the changes in the selection, if it is completely deleted.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@29672 a592a061-630c-0410-9148-cb99ea01b6c8
- correctly set buffer on paste. This fixes a crash on pasting branches
within child documents (bug 5813)
(patch by rgheck)
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@28711 a592a061-630c-0410-9148-cb99ea01b6c8
- constify some parameters
- getFontSettings():
- getFirstFontSettings(): return a const ref instead of a copy. This brings a consistent 4% improvement in LateX generation. Might speedup rtl handling too.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@26957 a592a061-630c-0410-9148-cb99ea01b6c8
