so we can write a limited amount when using this for TOC and
tooltip output.
This should solve the problem with slowness that Kornel noticed,
which was caused by our trying to write an entire plaintext
bibliography every time we updated the TOC. We did that because
he had a bibliography inside a branch, and we use plaintext for
creating the tooltip that goes with the branch list.
Other related bugs were fixed along the way. E.g., it turns out
that, if someone had an InsetInclude inside a branch, then we would
have been writing a *plaintext file* for that inset every time we
updated the TOC. I wonder if some of the other reports of slowness
we have received might be due to this kind of issue?
preparatory to fixing #7080. Note that mathed uses the same routine, but
for a completely different purpose, so I did not rename it there. I have
seen no difference in behavior after testing, e.g., opening and
exporting Math.lyx, and also re-saving it and looking at the diff.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@38109 a592a061-630c-0410-9148-cb99ea01b6c8
counting when exporting to latex. This is done for the code comprised
between \begin{document} and \end{document}, while the preamble code
still needs manual calls to TexRow::newline() for registering new lines.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@37584 a592a061-630c-0410-9148-cb99ea01b6c8
blank lines may be inadvertently output. This is achieved by using two
special iomanip-like variables (breakln and safebreakln) in the lyx::
namespace. When they are inserted in the stream, a newline is output
only if not already at the beginning of a line. The difference between
breakln and safebreakln is that, if needed, the former outputs '\n'
and the latter "%\n".
In future, the new class will also be used for counting the number of
newlines issued. Even if the infractrure for doing that is already in
place, the counting is essentially still done the old way.
There are still places in the code where the functionality of the
class could be used, most probably. ATM, it is used for InsetTabular,
InsetListings, InsetFloat, and InsetText.
The Comment and GreyedOut insets required a special treatment and a
new InsetLayout parameter (Display) has been introduced. The default
for Display is "true", meaning that the corresponding latex
environment is of "display" type, i.e., it stands on its own, whereas
"false" means that the contents appear inline with the text. The
latter is the case for both Comment and GreyedOut insets.
Mostly, the only visible effects on latex exports should be the
disappearing of some redundant % chars and the appearing/disappearing
of null {} latex groups after a comment or lyxgreyedout environments
(they are related to the presence or absence of a space immediately
after those environments), as well as the fact that math environments
are now started on their own lines.
As a last thing, only the latex code between \begin{document} and
\end{document} goes through the new class, the preamble being directly
output through odocstream, as usual.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@37360 a592a061-630c-0410-9148-cb99ea01b6c8
of things like:
pit.push_back(CursorSlice(*this));
which I've had to change to:
pit.push_back(CursorSlice(const_cast<InsetCaption &>(*this)));
and similarly in a few other places.
If anyone thinks we should instead have:
explicit CursorSlice(Inset const &);
then we can also do that.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@37192 a592a061-630c-0410-9148-cb99ea01b6c8
that also makes sure it doesn't do more work than it needs to do, by
limiting the size to 40 characters. Previously, InsetBranch::addToToc()
would have added a string representing the entire contents of the
branch! It's hard to imagine that having to recalculate that sort of
thing doesn't cause some problems with speed, especially in documents
with lots of notes and branches and such.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@36974 a592a061-630c-0410-9148-cb99ea01b6c8
For a displayed equation, the height is artificially increased by a displayMargin() in InsetMathHull::metrics if it is a displayed equation and there is a preview.
This extra height is not covered by the preview image and what one can see is the background as drawn by the MathHull inset. The color of this background should be either Color_mathbg or Color_background depending on whether the preview is shown or not.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@32560 a592a061-630c-0410-9148-cb99ea01b6c8
is commented out, so that the documentclass is queried every time instead of
using the layout_ cache. For now I have kept the setLayout calls, but they are
inoperant.
Other changes:
* remove non-const usePlainLayout methods
* move InsetCollapsable::allowSpellCheck and allowMultiPar to InsetText
* move InsetCollapsable::isFreespacing and forceLTR to Inset
Freespacing support could be moved to insettext, but I have to check who
uses it.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@30549 a592a061-630c-0410-9148-cb99ea01b6c8
* on paste, ask if unknown branches shall be added to the branch list
(entails new LFUN_BRANCH_ADD)
* add a list of undefined branches to the buffer and the GUI
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@30419 a592a061-630c-0410-9148-cb99ea01b6c8
routines, one that allows us to "defer" certain material, e.g., a float
that ought to appear in a div but can't simply be put into the middle
of a paragraph.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@30079 a592a061-630c-0410-9148-cb99ea01b6c8
this case, when the cursor is on a branch inset (using the AtPoint mechanism)
the branch to which the branch inset belongs will be (de)activated.
This functionality can now be used through the branch inset context menu
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@28987 a592a061-630c-0410-9148-cb99ea01b6c8
Synchronizing insets asserts with two views open
This finishes the change of http://www.lyx.org/trac/changeset/28587.
Replace the setButtonLabels functions that need a BufferView by buttonLabel functions. These functions modify the label at drawing time.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@28610 a592a061-630c-0410-9148-cb99ea01b6c8
Synchronizing insets asserts with two views open
It changes the autoOpen_ member of InsetCollapsable into a map, such that an autoOpen value can be specified for each bufferView. Now, the assertion is avoided and insetCollapsable can be open in one bufferview and be closed in the other in very special cases that the cursor end up in a closed inset.
Compare with the MathMacro::editing_ member.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@28573 a592a061-630c-0410-9148-cb99ea01b6c8
please check your favourite insets, I am sure I broke _something_...
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@24006 a592a061-630c-0410-9148-cb99ea01b6c8
* DocIterator as MacroPosition
* Iterative search for macro in scope until a visible one is found.
This include the ability to resolve macro inside nested text insets.
* Speed up macro lookups by factor 2: only getMacro(name) call, no
further hasMacro(name) call before
* Both way child/master support
* Correct macro scope for multi-paragraph environments
* Correct macro scope for multi-depth-paragraphs
* Buffer::updateMacros made const
* Update macros when loaded (of master and child)
* Do not remove too many braces when unfolding a macro. This could
lead to a data loss because the relationship between arguments of
macros can be mixed up if nested macros are unfold at once.
* Reduce dependencies to MetricsInfo in MathMacro
* Update macros when needed. Normally it's done just before doing
metrics. But in cases without a brace around some constructs (like
\left(bla\right)) there is some help needed.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@22241 a592a061-630c-0410-9148-cb99ea01b6c8
* buffer_funcs.cpp (updateLabels): new function taking a buffer and
a ParIterator as arguments. This one is used to update labels
into an InsetText. Cleanup the code to reset depth. Call setLabel
for each paragraph, and then updateLabel on each inset it contains.
(setCaptionLabels, setCaptions): removed.
(setLabel): use Counters::current_float to make caption paragraphs
labels.
* insets/Inset.h (updateLabels): new virtual method, empty by
default; this numbers the inset itself (if relevant) and then all
the paragraphs it may contain.
* insets/InsetText.cpp (updateLabels): basically calls
lyx::updateLabels from buffer_func.cpp.
* insets/InsetCaption.cpp (addToToc): use the label constructed by
updateLabels.
(computeFullLabel): removed.
(metrics, plaintext): don't use computeFullLabel.
(updateLabels): new method; set the label from
Counters::current_float.
* insets/InsetWrap.cpp (updateLabels):
* insets/InsetFloat.cpp (updateLabel): new method; sets
Counters::current_float to the float type.
* insets/InsetBranch.cpp (updateLabels): new method; the numbering
is reset afterwards if the branch is inactive. (bug 2671)
* insets/InsetNote.cpp (updateLabels): new method; the numbering
is reset after the underlying InsetText has been numbered.
(bug 2671)
* insets/InsetTabular.cpp (updateLabels): new method (also handles
longtable)
* insets/InsetListings.cpp (updateLabels): new method; mimics what
is done for Floats (although Listings are not floats technically)
* insets/InsetInclude.cpp (getScreenLabel): in the listings case,
use the computed label.
(updateLabels): new method; that either renumbers the child
document or number the current listing.
* LyXFunc.cpp (menuNew): do not updateLabels on empty documents
(why do we do that at all?)
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@19482 a592a061-630c-0410-9148-cb99ea01b6c8
especially in math where each equation has many insets.
* src/Insets.cpp: remove background_color_ member
(setBackgroundColor): remove
(backgroundColor): make virtual
* insets/InsetBranch.cpp:
* insets/InsetNote.cpp: move color setting code from setButtonLabel to
backgroundColor.
* insets/InsetBox.cpp (setButtonLabel): remove call to setBackgroundColor.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@18750 a592a061-630c-0410-9148-cb99ea01b6c8
* InsetMath::name(): deleted.
* buffer_funcs.cpp:setCaptions() fix potential bug by using docstring copy instead of reference while using Inset::name.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@18119 a592a061-630c-0410-9148-cb99ea01b6c8
