#LyX 2.3 created this file. For more info see http://www.lyx.org/ \lyxformat 543 \begin_document \begin_header \save_transient_properties true \origin /systemlyxdir/doc/ja/ \textclass scrbook \begin_preamble %% Added by the translator % Correction for PDF bookmarks %\usepackage[dvipdfm,bookmarks=true,bookmarksnumbered=true,bookmarkstype=toc]{hyperref} \ifnum 42146=\euc"A4A2 \AtBeginDvi{\special{pdf:tounicode EUC-UCS2}}\else \AtBeginDvi{\special{pdf:tounicode 90ms-RKSJ-UCS2}}\fi % that links to image floats jumps % to the beginning of the float and % not to its caption \usepackage[figure]{hypcap} % the pages of the TOC is numbered roman % and a PDF-bookmark for the TOC is added \let\myTOC\tableofcontents \renewcommand\tableofcontents{% \frontmatter \pdfbookmark[1]{\contentsname}{} \myTOC \mainmatter } % provides caption formatting \usepackage[labelfont={bf,sf}]{caption}[2004/07/16] % provides commands to set caption % beside tables/images \newcommand{\TabBesBeg}[1][1.0]{% \let\MyTable\table \let\MyEndtable\endtable \renewenvironment{table}[1]{\begin{SCtable}[#1]##1}{\end{SCtable}}} \newcommand{\TabBesEnd}{% \let\table\MyTable \let\endtable\MyEndtable} \newcommand{\FigBesBeg}[1][1.0]{% \let\MyFigure\figure \let\MyEndfigure\endfigure \renewenvironment{figure}[1]{\begin{SCfigure}[#1]##1}{\end{SCfigure}}} \newcommand{\FigBesEnd}{% \let\figure\MyFigure \let\endfigure\MyEndfigure} % enables calculation of values, \usepackage{calc} % increase the bottom float placement fraction \renewcommand{\bottomfraction}{0.5} % avoids that floats are placed before their % corresponding section starts \let\mySection\section\renewcommand{\section}{\suppressfloats[t]\mySection} % speed up the longtable calculation \setcounter{LTchunksize}{100} % used for colored tables \@ifundefined{textcolor} {\usepackage{color}}{} \definecolor{darkgreen}{cmyk}{0.5, 0, 1, 0.5} \definecolor{lightgrey}{gray}{0.8} % check for package colortbl % used for colored table cells \newboolean{colortbl} \IfFileExists{colortbl.sty} {\usepackage{colortbl} \setboolean{colortbl}{true}} {\setboolean{colortbl}{false}} % used to have extra space in table cells \@ifundefined{extrarowheight} {\usepackage{array}}{} \setlength{\extrarowheight}{2pt} % used for customized tables % --- \newcolumntype{M}[1] {>{\centering\hspace{0pt}}m{#1}} \newcolumntype{S}[2] {>{\centering\hspace{0pt}}m{(#1+(2\tabcolsep+\arrayrulewidth)*(1-#2))/#2}} \newcolumntype{K}[1] {>{\columncolor{#1}\hspace{0pt}}c} \newcolumntype{V}{!{\vrule width 1.5pt}} \newcolumntype{W}{!{\color{green}\vline}} % --- % insert additional vertical space of % 1.5 mm between footnotes \let\myFoot\footnote \renewcommand{\footnote}[1]{\myFoot{#1\vspace{1.5mm}}} % number algorithm floats within chapters \numberwithin{algorithm}{chapter} % ------------------------------------ % used to check for needed LaTeX packages \usepackage{ifthen} % check for package arydshln % used for tables with dashed lines \newboolean{arydshln} \IfFileExists{arydshln.sty} {\usepackage{arydshln} \setboolean{arydshln}{true}} {\setboolean{arydshln}{false}} % check for package marginnote % used for margin notes \newboolean{marginnote} \IfFileExists{marginnote.sty} {\usepackage{marginnote} \let\marginpar\marginnote \setboolean{marginnote}{true}} {\setboolean{marginnote}{false}} % check for package sidecap % used for captions on the side \newboolean{sidecap} \IfFileExists{sidecap.sty} {% \usepackage{sidecap} % This breaks title fonts with pLaTeX \setboolean{sidecap}{true}} {\setboolean{sidecap}{false}} % set sidecap to false in all cases for Japanese manual. % It breaks compliation and gives the following error: % ! LaTeX Error: Environment SCfigure undefined. \setboolean{sidecap}{false} % check for picinpar % used for surrounded fixed objects \newboolean{picinpar} \IfFileExists{picinpar.sty} {\usepackage{picinpar} \setboolean{picinpar}{true}} {\setboolean{picinpar}{false}} % check for lettrine \newboolean{lettrine} \IfFileExists{lettrine.sty} {\usepackage{lettrine} \setboolean{lettrine}{true}} {\setboolean{lettrine}{false}} % check for diagbox \newboolean{diagbox} \IfFileExists{diagbox.sty} {\usepackage{diagbox} \setboolean{diagbox}{true}} {\setboolean{diagbox}{false}} \usepackage{t1enc} \renewcommand{\seename}{→} \usepackage{subfig} \DeclareCaptionOption{large}[]{\def\captionfont{\large}} \DeclareCaptionOption{Large}[]{\def\captionfont{\Large}} \end_preamble \options bibliography=totoc,index=totoc,BCOR7.5mm,titlepage,captions=tableheading,dvipsnames,table \use_default_options false \begin_modules initials graphicboxes \end_modules \maintain_unincluded_children false \begin_local_layout InsetLayout Flex:Ruby LyxType charstyle LatexType command LatexName ruby BgColor none LabelString "ルビ" Decoration Conglomerate Argument post:1 LabelString "ルビ文" MenuString "ルビ文(S)|S" Decoration Conglomerate Font Size tiny EndFont LabelFont Size tiny EndFont Mandatory 1 EndArgument Preamble \IfFileExists{okumacro.sty} {\usepackage{okumacro}} {\newcommand{\ruby}[2]{#2}} EndPreamble End \end_local_layout \language japanese \language_package default \inputencoding auto \fontencoding global \font_roman "default" "default" \font_sans "default" "default" \font_typewriter "default" "default" \font_math "auto" "auto" \font_default_family default \use_non_tex_fonts false \font_sc false \font_osf false \font_sf_scale 100 100 \font_tt_scale 100 100 \use_microtype false \use_dash_ligatures false \graphics default \default_output_format pdf3 \output_sync 0 \bibtex_command default \index_command default \paperfontsize 12 \spacing single \use_hyperref true \pdf_title "LyX's Figure, Table, Floats, Notes, and Boxes manual" \pdf_author "LyX Team, Uwe Stohr" \pdf_subject "LyX-documentation about figures, tables, floats, notes, and boxes" \pdf_keywords "LyX, Tables, Figures, Floats, Boxes, Notes" \pdf_bookmarks false \pdf_bookmarksnumbered true \pdf_bookmarksopen true \pdf_bookmarksopenlevel 1 \pdf_breaklinks false \pdf_pdfborder false \pdf_colorlinks true \pdf_backref false \pdf_pdfusetitle false \pdf_quoted_options " linkcolor=black, citecolor=black, urlcolor=blue, filecolor=blue, pdfpagelayout=OneColumn, pdfnewwindow=true, pdfstartview=XYZ, plainpages=false, pdfpagelabels" \papersize default \use_geometry false \use_package amsmath 2 \use_package amssymb 2 \use_package cancel 0 \use_package esint 0 \use_package mathdots 1 \use_package mathtools 0 \use_package mhchem 1 \use_package stackrel 0 \use_package stmaryrd 0 \use_package undertilde 0 \cite_engine basic \cite_engine_type default \biblio_style plain \use_bibtopic false \use_indices false \paperorientation portrait \suppress_date false \justification true \use_refstyle 0 \notefontcolor #0000ff \index 索引 \shortcut idx \color #008000 \end_index \leftmargin 2.5cm \topmargin 2.5cm \rightmargin 2.5cm \bottommargin 3cm \secnumdepth 3 \tocdepth 3 \paragraph_separation skip \defskip medskip \is_math_indent 0 \math_numbering_side default \quotes_style english \dynamic_quotes 0 \papercolumns 1 \papersides 2 \paperpagestyle default \bullet 1 1 34 -1 \bullet 2 2 35 -1 \bullet 3 2 7 -1 \tracking_changes false \output_changes false \html_math_output 0 \html_css_as_file 0 \html_be_strict false \end_header \begin_body \begin_layout Title \SpecialChar LyX の図表・フロート・註釈・ボックス・外部素材に関する詳細説明書 \end_layout \begin_layout Author \SpecialChar LyX プロジェクトチーム \begin_inset Foot status collapsed \begin_layout Plain Layout \noindent コメントや間違いの指摘がありましたら,\SpecialChar LyX 文書化メーリングリスト \begin_inset CommandInset href LatexCommand href name "lyx-docs@lists.lyx.org" target "lyx-docs@lists.lyx.org?subject=EmbeddedObjects manual" type "mailto:" literal "false" \end_inset までお送り下さい. \end_layout \end_inset \begin_inset Note Note status collapsed \begin_layout Plain Layout 著者:Uwe Stöhr \end_layout \end_inset \begin_inset Newline newline \end_inset \begin_inset Newline newline \end_inset \family sans 第2.2.x版 \end_layout \begin_layout Standard \begin_inset CommandInset toc LatexCommand tableofcontents \end_inset \end_layout \begin_layout Standard \begin_inset Note Note status open \begin_layout Plain Layout 本文書の全体をPDFやPS,DVIに書き出すには, \series bold arydshln \series default ・ \series bold colortbl \series default ・ \series bold diagbox \series default ・ \series bold lettrine \series default ・ \series bold marginnote \series default ・ \series bold picinpar \series default ・ \series bold sidecap \series default の各\SpecialChar LaTeX パッケージが導入されている必要があります.これらが導入されていなくても,文書を書き出すことはできますが,これらのパッケージが必要な節は出力には表示されません . \end_layout \begin_layout Plain Layout 本文書の最新PDF版は \begin_inset Newline newline \end_inset \series bold http://wiki.lyx.org/\SpecialChar LyX /Manuals#EmbeddedObjects \series default \begin_inset Newline newline \end_inset にあります. \end_layout \end_inset \end_layout \begin_layout Chapter 図 \begin_inset Index idx status collapsed \begin_layout Plain Layout ず@図 \end_layout \end_inset \begin_inset Index idx status collapsed \begin_layout Plain Layout がぞう@画像 \begin_inset ERT status collapsed \begin_layout Plain Layout |see{ \end_layout \end_inset 図 \begin_inset ERT status collapsed \begin_layout Plain Layout } \end_layout \end_inset \end_layout \end_inset \end_layout \begin_layout Section 画像ダイアログ \begin_inset Index idx status collapsed \begin_layout Plain Layout ず@図 ! がぞうだいあろぐ@画像ダイアログ \end_layout \end_inset \begin_inset CommandInset label LatexCommand label name "sec:画像ダイアログ" \end_inset \end_layout \begin_layout Standard 画像を文書に挿入するには,文中の挿入箇所にカーソルを置いて,ツールバーアイコン \family sans \begin_inset Info type "icon" arg "dialog-show-new-inset graphics" \end_inset \family default をクリックするか, \family sans 挿入\SpecialChar menuseparator 画像 \family default メニューを使用して下さい.すると,ダイアログが現れるので,読み込むファイルを選択して下さい.出力中での画像は,本文中の挿入位置に正確に出力されます. \end_layout \begin_layout Standard 画像ダイアログは,画像をクリックすることによって,いつでも呼び出すことができます.このダイアログには,以下の三つのタブがあります. \end_layout \begin_layout Description \family sans 画像 \family default ここでは,画像ファイルを選択し,その出力での表示のしかたを調整することができます.画像寸法で使用することのできる単位については付録 \begin_inset CommandInset ref LatexCommand ref reference "cha:LyXで使用できる単位" \end_inset に説明があります. \begin_inset Newline newline \end_inset \begin_inset Index idx status collapsed \begin_layout Plain Layout ず@図 ! のかいてん@—の回転 \end_layout \end_inset 回転角と回転原点を指定することによって,反時計廻り方向へ画像を回転することができます.画像は,\SpecialChar LyX 内でも回転して表示されます. \begin_inset Newline newline \end_inset \begin_inset Index idx status collapsed \begin_layout Plain Layout ず@図 ! のしんしゅく@—の伸縮 \end_layout \end_inset 画像は,パーセント値を指定するか,幅と高さを明示的に設定することによって,伸縮させることができます.幅と高さのどちらか一方のみを指定した場合には,残りの寸法は自 動的に決定されます.両方とも指定した場合には,指定した寸法に画像が変換されますので,変形してしまう可能性があります.画像が変形するのを防ぐには, \family sans 縦横比を維持する \family default オプションを指定して下さい.すると画像は,幅と高さが指定した寸法を越えないように伸縮されます. \begin_inset Newline newline \end_inset 画像を右クリックすると現れるコンテクストメニューで \family sans 外部で編集 \family default という項目を選ぶことによって,画像を指定したプログラムで開くことができます.このプログラムは,\SpecialChar LyX 設定のファイル書式設定で,各画像書式ごとに設定することができます. \end_layout \begin_layout Description \family sans 切り抜き \family default 伸縮単位を使用する代わりに,出力における画像の縦横の長さを調整するのに,画像座標の設定をすることができます.座標は, \family sans ファイルから取得 \family default ボタンを押すことによって,自動的に計算することもできます. \family sans 境界枠で切り抜く \family default オプションは,指定された座標内の画像領域のみ印字します.通常は,画像座標を気にする必要はないので,このタブは無視して構いません. \end_layout \begin_layout Description \family sans \SpecialChar LaTeX と\SpecialChar LyX のオプション \family default このタブでは,\SpecialChar LyX 内での画像表示法を調整できる他,\SpecialChar LaTeX のエキスパート向けに\SpecialChar LaTeX オプションを追加することができるようになっています. \family sans \begin_inset Newline newline \end_inset 下書きモード \family default オプションを指定すると,画像は出力には現れず,画像と同じ大きさの枠だけが表示されます. \family sans \begin_inset Newline newline \end_inset 画像グループ \family default のセクションでは,画像設定グループを定義したり,既存のものに所属させたりすることができます. \begin_inset Index idx status collapsed \begin_layout Plain Layout ず@図 ! せっていぐるーぷ@設定グループ \end_layout \end_inset これらのグループ内の画像は,共通した設定を持つので,グループ内の一つの画像の設定をいじると,自動的にグループ内の全ての画像の設定が同じように変更されます.したが って,たとえば,たくさんの画像の寸法を変更したいときにも,一つ一つの寸法を手動で変更せずに済むのです.既存のグループに帰属させるには,画像のコンテクストメニュー を使用して,望むグループ名をチェックすることで行うこともできます. \end_layout \begin_layout Standard \begin_inset VSpace bigskip \end_inset \end_layout \begin_layout Standard 下記はPDF書式 \begin_inset Foot status collapsed \begin_layout Plain Layout 画像書式は,第 \begin_inset CommandInset ref LatexCommand ref reference "sec:画像形式" \end_inset 節に説明されています. \end_layout \end_inset の画像の例で,単独の中央揃えの段落に置いてあります. \end_layout \begin_layout Standard \align center \begin_inset Graphics filename ../clipart/2D-intensity-plot.pdf scaleBeforeRotation rotateOrigin center \end_inset \end_layout \begin_layout Standard 下記は上と同じ画像ですが,下書きモードのものです. \end_layout \begin_layout Standard \align center \begin_inset Graphics filename ../clipart/2D-intensity-plot.pdf draft scaleBeforeRotation rotateOrigin center \end_inset \end_layout \begin_layout Standard \begin_inset Newpage newpage \end_inset \end_layout \begin_layout Section 図フロート \begin_inset CommandInset label LatexCommand label name "sec:図フロート" \end_inset \begin_inset Index idx status collapsed \begin_layout Plain Layout ふろーと@フロート ! ず@図 \end_layout \end_inset \begin_inset Index idx status collapsed \begin_layout Plain Layout ず@図 ! ふろーと@フロート \end_layout \end_inset \end_layout \begin_layout Standard フロートについての一般的な説明は,第 \begin_inset CommandInset ref LatexCommand ref reference "sec:フロートはじめに" \end_inset 節をご覧下さい. \end_layout \begin_layout Standard ツールバーボタンの \family sans \begin_inset Info type "icon" arg "float-insert figure" \end_inset \family default か \family sans 挿入\SpecialChar menuseparator フロート\SpecialChar menuseparator 図 \family default メニューを用いると,「図 #」(#は実際には数字です)というラベルのキャプションを持ったフロートが挿入されます.画像は,図 \begin_inset CommandInset ref LatexCommand ref reference "fig:A-star-structure" \end_inset のようにキャプションの上に置くこともできますし,図 \begin_inset CommandInset ref LatexCommand ref reference "fig:A-3D-object" \end_inset のようにキャプションの下に置くこともできます.キャプションの配置について詳しくは,第 \begin_inset CommandInset ref LatexCommand ref reference "sec:キャプションの配置" \end_inset 節に述べられています. \end_layout \begin_layout Standard \begin_inset Float figure wide false sideways false status open \begin_layout Plain Layout \align center \begin_inset Graphics filename ../clipart/Star-structure.pdf width 50col% scaleBeforeRotation rotateOrigin center \end_inset \end_layout \begin_layout Plain Layout \begin_inset Caption Standard \begin_layout Plain Layout \begin_inset CommandInset label LatexCommand label name "fig:A-star-structure" \end_inset \lang english A star structure in a float. \end_layout \end_inset \end_layout \end_inset \end_layout \begin_layout Standard \begin_inset Float figure wide false sideways false status open \begin_layout Plain Layout \begin_inset Caption Standard \begin_layout Plain Layout \begin_inset CommandInset label LatexCommand label name "fig:A-3D-object" \end_inset \lang english A 3D object. \end_layout \end_inset \end_layout \begin_layout Plain Layout \align center \begin_inset Graphics filename ../clipart/3D-structure-distort.pdf scale 80 scaleBeforeRotation rotateOrigin center \end_inset \end_layout \end_inset \end_layout \begin_layout Standard \begin_inset Index idx status collapsed \begin_layout Plain Layout さんしょう@参照 ! ずへの@図への — \end_layout \end_inset 第 \begin_inset CommandInset ref LatexCommand ref reference "fig:A-star-structure" \end_inset 図と第 \begin_inset CommandInset ref LatexCommand ref reference "fig:A-3D-object" \end_inset 図は,参照された図の例です.図は,本文中でラベルを参照することによって参照できます.これをするには,まず, \family sans 挿入\SpecialChar menuseparator ラベル \family default メニューかツールバーボタン \family sans \begin_inset Info type "icon" arg "label-insert" \end_inset \family default を使用して,キャプションにラベルを挿入してください.その後, \family sans 挿入\SpecialChar menuseparator 相互参照 \family default メニューかツールバーボタン \family sans \begin_inset Info type "icon" arg "dialog-show-new-inset ref" \end_inset \family default を使用して,ラベルを参照することができます.\SpecialChar LaTeX は仕上文書でのフロートの位置を調整するので,「上図」のような曖昧な参照のしかたをするのではなく,フロートを直接参照す ることが重要です.仕上文書では,「上図」ではないことが,大いにありうるからです. \begin_inset Newline newline \end_inset 参照は,第 \begin_inset CommandInset ref LatexCommand ref reference "sec:フロートの参照" \end_inset 節で詳細に説明されています. \end_layout \begin_layout Standard 通常,図フロートには一つの画像だけを挿入しますが,場合によっては,二つの画像に別々の副キャプションをつけて挿入したいこともあるかもしれません.その場合は,既存の 図フロートの中に図フロートを入れ込むことによって,実現することができます.ただし,図一覧にはフロートの主キャプションのみが表示されることに留意してください.図 \begin_inset CommandInset ref LatexCommand ref reference "fig:歪められた二つの像" \end_inset は,二つの画像が横に並んでいる図フロートの例です.二つめの画像を一つめの下に持ってくることも可能です.図 \begin_inset CommandInset ref LatexCommand ref reference "fig:Pink-object" \end_inset と図 \begin_inset CommandInset ref LatexCommand ref reference "fig:A-star" \end_inset が内部図になります. \end_layout \begin_layout Standard \begin_inset Float figure wide false sideways false status open \begin_layout Plain Layout \begin_inset space \hfill{} \end_inset \begin_inset Float figure wide false sideways false status collapsed \begin_layout Plain Layout \begin_inset Caption Standard \begin_layout Plain Layout \begin_inset CommandInset label LatexCommand label name "fig:Pink-object" \end_inset \lang english Pink object. \end_layout \end_inset \end_layout \begin_layout Plain Layout \begin_inset Graphics filename ../clipart/3D-structure-distort.pdf width 45col% scaleBeforeRotation groupId distorted \end_inset \end_layout \end_inset \begin_inset space \hfill{} \end_inset \begin_inset Float figure wide false sideways false status collapsed \begin_layout Plain Layout \begin_inset Caption Standard \begin_layout Plain Layout \begin_inset CommandInset label LatexCommand label name "fig:A-star" \end_inset \lang english A star. \end_layout \end_inset \end_layout \begin_layout Plain Layout \begin_inset Graphics filename ../clipart/Star-structure.pdf width 45col% scaleBeforeRotation groupId distorted \end_inset \end_layout \end_inset \begin_inset space \hfill{} \end_inset \end_layout \begin_layout Plain Layout \begin_inset Caption Standard \begin_layout Plain Layout \begin_inset CommandInset label LatexCommand label name "fig:歪められた二つの像" \end_inset 歪められた二つの像.両画像とも,「歪曲」画像設定グループに属しています. \end_layout \end_inset \end_layout \end_inset \end_layout \begin_layout Standard \begin_inset Newpage newpage \end_inset \end_layout \begin_layout Section 画像形式 \begin_inset CommandInset label LatexCommand label name "sec:画像形式" \end_inset \begin_inset Index idx status collapsed \begin_layout Plain Layout がぞうけいしき@画像形式 \end_layout \end_inset \begin_inset Index idx status collapsed \begin_layout Plain Layout ず@図 ! がぞうけいしき@画像形式 \end_layout \end_inset \end_layout \begin_layout Standard 画像は,既知のファイル形式であれば,どのような形式でも挿入することができます.しかし,付録 \begin_inset CommandInset ref LatexCommand ref reference "cha:ファイル出力形式" \end_inset で説明されているように,出力に関しては,どの出力文書形式も,いくつかの画像形式しか受け付けません.したがって\SpecialChar LyX は,画像を正しい形式に変換するのに,バックグラウンド で \family typewriter ImageMagick \family default というプログラムを使用しています.バックグラウンドで変換が発生することを避けて作業能率を上げようとお考えならば,出力ファイル形式に直接埋め込める画像形式のみを使 用するとよいでしょう.出力ファイル形式は,付録 \begin_inset CommandInset ref LatexCommand ref reference "cha:ファイル出力形式" \end_inset に説明されています. \end_layout \begin_layout Standard フォントと同じく,画像形式にも以下の二つの型があります. \end_layout \begin_layout Description ビットマップ画像 は,ピクセル値を(時により圧縮された形で)保持しています.したがって,この画像形式は完全に伸縮可能ではなく,拡大するとピクセルが目立つようにな ります.よく知られたビットマップ画像形式には,「Graphics Interchange Format(画像交換形式)」(GIF・ファイル拡張子は「 \family typewriter .gif \family default 」) \begin_inset Index idx status collapsed \begin_layout Plain Layout GIF \begin_inset ERT status collapsed \begin_layout Plain Layout |see{ \end_layout \end_inset 画像書式 \begin_inset ERT status collapsed \begin_layout Plain Layout } \end_layout \end_inset \end_layout \end_inset ,「Portable Network Graphics(可搬性ネットワーク画像ファイル)」(PNG・ファイル拡張子は「 \family typewriter .png \family default 」) \begin_inset Index idx status collapsed \begin_layout Plain Layout PNG \begin_inset ERT status collapsed \begin_layout Plain Layout |see{ \end_layout \end_inset 画像書式 \begin_inset ERT status collapsed \begin_layout Plain Layout } \end_layout \end_inset \end_layout \end_inset ,「Joint Photographic Experts Group(写真専門家連合組織)」(JPG・ファイル拡張子は「 \family typewriter .jpg \family default 」または「 \family typewriter .jpeg \family default 」) \begin_inset Index idx status collapsed \begin_layout Plain Layout JPG \begin_inset ERT status collapsed \begin_layout Plain Layout |see{ \end_layout \end_inset 画像書式 \begin_inset ERT status collapsed \begin_layout Plain Layout } \end_layout \end_inset \end_layout \end_inset などがあります. \end_layout \begin_layout Description ベクトル画像 はベクトル値を保持しているので,データ損失なしに任意の寸法の伸縮させることができます.プレゼンテーションは,ビデオプロジェクタがかならず伸縮操作を 行うことになるので,プレゼンテーションを作成したいときには画像が伸縮できることが必須です.また,伸縮性は,オンライン文書でユーザーが図の拡大ができるようにするの に便利です. \begin_inset Newline newline \end_inset よく知られた伸縮可能画像形式には,「Scalable Vector Graphics(伸縮可能ベクトル画像ファイル)」(SVG・ファイル拡張子は「 \family typewriter .svg \family default 」) \begin_inset Index idx status collapsed \begin_layout Plain Layout SVG \begin_inset ERT status collapsed \begin_layout Plain Layout |see{ \end_layout \end_inset 画像書式 \begin_inset ERT status collapsed \begin_layout Plain Layout } \end_layout \end_inset \end_layout \end_inset ,「Encapsulated PostScript(カプセル化ポストスクリプト)」(EPS・ファイル拡張子は「 \family typewriter .eps \family default 」) \begin_inset Index idx status collapsed \begin_layout Plain Layout EPS \begin_inset ERT status collapsed \begin_layout Plain Layout |see{ \end_layout \end_inset 画像書式 \begin_inset ERT status collapsed \begin_layout Plain Layout } \end_layout \end_inset \end_layout \end_inset ,「Portable Document Format(可搬文書形式)」(PDF・ファイル拡張子は「 \family typewriter .pdf \family default 」) \begin_inset Index idx status collapsed \begin_layout Plain Layout PDF \end_layout \end_inset ,「Windowsメタファイル」(WMF・ファイル拡張子は「 \family typewriter .wmf \family default 」) \begin_inset Index idx status collapsed \begin_layout Plain Layout SVG \begin_inset ERT status collapsed \begin_layout Plain Layout |see{ \end_layout \end_inset 画像書式 \begin_inset ERT status collapsed \begin_layout Plain Layout } \end_layout \end_inset \end_layout \end_inset がありえます.「ありえます」と言ったのは,ビットマップ画像はいつでもPDFやEPSに変換することができますが,変換後も依然としてビットマップ画像のままだからです .このような場合には,画像特性を示すヘッダが元々の画像に付け加えられるだけなのです \begin_inset Foot status collapsed \begin_layout Plain Layout PDFの場合には,さらに元画像が圧縮されます. \end_layout \end_inset .たとえば, \family typewriter Adobe Photoshop \family default が生成するPDFファイルは,ビットマップ画像です. \end_layout \begin_layout Standard 通常,ビットマップ画像を伸縮可能画像には変換できず,その逆のみが可能です.PDFやPostScript出力ファイルに直接埋め込むことができるのは,それぞれPDF 画像書式とEPS画像書式のみです.いまのところ適切なWMF/SVG \begin_inset Formula $\to$ \end_inset PDF/EPS変換子がないので,SVGおよびWMF画像は,出力ファイルが生成される際にビットマップに計算し直されます. \end_layout \begin_layout Chapter 表 \begin_inset Index idx status collapsed \begin_layout Plain Layout ひょう@表 \end_layout \end_inset \end_layout \begin_layout Section はじめに \begin_inset Index idx status collapsed \begin_layout Plain Layout ひょう@表 ! はじめに \end_layout \end_inset \end_layout \begin_layout Standard \family roman \series medium \shape up \size normal \emph off \bar no \noun off \color none 表を挿入するには,ツールバーボタ \family default \series default \shape default \size default \emph default \bar default \noun default \color inherit ン \begin_inset Info type "icon" arg "tabular-insert" \end_inset か \family roman \series medium \shape up \size normal \emph off \bar no \noun off \color none , \family sans \series default \shape default \size default \emph default \bar default \noun default \color inherit 挿入\SpecialChar menuseparator 表 \family default メニューを選択します.ツールバーボタンを押すと,グラフィカルな選択ができます.マウスを動かして,生成する表の行数・列数を設定し,マウスボタンを押して下さい.表を 作るのにメニューを使う場合は,ダイアログが現れ,行数と列数を訊いてきます. \begin_inset Newline newline \end_inset 既定の表では,各セルの周囲に罫線が引かれ,第一行が表の他の部分から分離して表示されます.この分離が起こるのは二重線のためです.第一行のセルが下に罫線を伴っている のと同時に,第二行のセルも上に罫線を伴っているのです.以下は表の一例です. \end_layout \begin_layout Standard \align center \begin_inset Tabular <lyxtabular version="3" rows="4" columns="4"> <features tabularvalignment="middle"> <column alignment="center" valignment="top"> <column alignment="center" valignment="top"> <column alignment="center" valignment="top"> <column alignment="center" valignment="top"> <row> <cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 1 \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 2 \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 3 \end_layout \end_inset </cell> </row> <row> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout い \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \end_layout \end_inset </cell> </row> <row> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout ろ \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \end_layout \end_inset </cell> </row> <row> <cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout は \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \end_layout \end_inset </cell> </row> </lyxtabular> \end_inset \end_layout \begin_layout Section 表ダイアログ \begin_inset Index idx status collapsed \begin_layout Plain Layout ひょう@表 ! だいあろぐ@ダイアログ \end_layout \end_inset \end_layout \begin_layout Standard \family roman \series medium \shape up \size normal \emph off \bar no \noun off \color none 表を右クリックすると,文脈依存メニューが表示されて,表を変更することができます.メニュー項目 \family sans \series default \shape default \size default \emph default \bar default \noun default \color inherit 詳細 \family roman \series medium \shape up \size normal \emph off \bar no \noun off \color none 以下では,現在カーソルが置かれているセルないし行・列の設定を調節することができます.文脈依存メニュー \family sans \series default \shape default \size default \emph default \bar default \noun default \color inherit 詳細\SpecialChar menuseparator 設定 \family roman \series medium \shape up \size normal \emph off \bar no \noun off \color none を選ぶと,ダイアログボックスが開いて,更に詳細な設定を行うことができます.また,ダイアログオプションのほとんどは,選択範囲に対しても動作します.つまり,複数のセ ルや行・列を選択していれば,操作は選択範囲の全てに対して行われます. \family default \series default \shape default \size default \emph default \bar default \noun default \color inherit セルの \emph on 内容 \emph default を選択するのと,セル自体を選択するのは異なることに注意して下さい. \begin_inset Newline newline \end_inset ダイアログオプションの \family sans 直ちに適用 \family default を使用すると,ダイアログ中に行った変更が直ちに適用されるようになります.カーソルを別のセルに移動すると,ダイアログも新しいセルのパラメーターに更新されます.ダイ アログ中の長さの値を変更した場合には,リターンを押さないと変更が適用されません. \begin_inset Newline newline \end_inset 表ダイアログの以下の各タブを使用して,表に変更を加えることができます. \end_layout \begin_layout Description 表の設定 ここでは,現在列の幅と水平揃えを設定することができます. \family sans 小数点で \family default とある揃えは,第 \begin_inset CommandInset ref LatexCommand ref reference "subsec:特殊なセル揃え" \end_inset で説明されています.幅を設定した場合には,現在行の垂直揃えも調整することができます.列幅を与えると,改行や多段落の文章をセルに入れることができます.これに関して は,第 \begin_inset CommandInset ref LatexCommand ref reference "subsec:複数行" \end_inset 節をご参照下さい.列幅を設定しない場合には,列幅は,もっとも幅の広いセル内容の幅になります. \begin_inset Newline newline \end_inset さらに,同一行の一つまたは複数のセルを連結列セルとして指定することができます.これに関しては,第 \begin_inset CommandInset ref LatexCommand ref reference "subsec:連結列" \end_inset 節をご参照下さい.あるいは同一列のセルを連結行セルとして指定することもできます.これについては,第 \begin_inset CommandInset ref LatexCommand ref reference "subsec:連結行" \end_inset 節をご参照ください. \begin_inset Newline newline \end_inset 回転関連のチェックボックスは,現在セルや選択範囲あるいは表全体を反時計廻りに90度回転させます.回転は,\SpecialChar LyX 内部では反映されず,出力にのみ現れます.詳細については, 第 \begin_inset CommandInset ref LatexCommand ref reference "sec:表セルの回転" \end_inset 節をご覧下さい. \begin_inset Newline newline \end_inset \begin_inset Note Greyedout status open \begin_layout Plain Layout \series bold 【註】 \series default DVIビューアのすべてが回転を表示できるわけではありません. \end_layout \end_inset \begin_inset Newline newline \end_inset 下記は,本文行中の表に,表全体の垂直揃えを適用したものです. \begin_inset Newline newline \end_inset 各種の揃えを適用した同一行中の表: \begin_inset Tabular <lyxtabular version="3" rows="2" columns="2"> <features tabularvalignment="top"> <column alignment="center" valignment="top" width="0pt"> <column alignment="center" valignment="top"> <row> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 1 \end_layout \end_inset </cell> </row> <row> <cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout A \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \end_layout \end_inset </cell> </row> </lyxtabular> \end_inset \begin_inset Tabular <lyxtabular version="3" rows="2" columns="2"> <features tabularvalignment="middle"> <column alignment="center" valignment="top"> <column alignment="center" valignment="top"> <row> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 1 \end_layout \end_inset </cell> </row> <row> <cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout A \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \end_layout \end_inset </cell> </row> </lyxtabular> \end_inset \begin_inset Tabular <lyxtabular version="3" rows="2" columns="2"> <features tabularvalignment="bottom"> <column alignment="center" valignment="top" width="0pt"> <column alignment="center" valignment="top"> <row> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 1 \end_layout \end_inset </cell> </row> <row> <cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout A \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \end_layout \end_inset </cell> </row> </lyxtabular> \end_inset \begin_inset Newline newline \end_inset また,特殊な表設定に必要な\SpecialChar LaTeX 引数を入力することもできます.これに関しては,第 \begin_inset CommandInset ref LatexCommand ref reference "subsec:連結列の計算" \end_inset 節および第 \begin_inset CommandInset ref LatexCommand ref reference "sec:色付きの表" \end_inset 節をご参照下さい. \end_layout \begin_layout Description 罫線 このタブでは,現在列ないし現在行の罫線を引いたり消したりすることができます. \begin_inset Newline newline \end_inset 様式オプションとして \family sans フォーマル様式 \family default を使用すると,第 \begin_inset CommandInset ref LatexCommand ref reference "sec:フォーマル様式の表" \end_inset 節に述べられているフォーマル様式の表に表を変換します. \begin_inset Newline newline \end_inset またここで,第 \begin_inset CommandInset ref LatexCommand ref reference "subsec:行の余白取り" \end_inset 節に述べられているように,表の行に空白を追加することもできます. \end_layout \begin_layout Description 多頁表 このタブは,複数のページにわたる,いわゆる「 \emph on 多頁表 \emph default 」を作るためのものです.第 \begin_inset CommandInset ref LatexCommand ref reference "sec:多頁表" \end_inset 節および第 \begin_inset CommandInset ref LatexCommand ref reference "sec:多頁表にまつわる諸点" \end_inset 節に,多頁表の機能に関する詳細な説明があります. \end_layout \begin_layout Section 表ツールバー \begin_inset Index idx status collapsed \begin_layout Plain Layout ひょう@表 ! つーるばー@ツールバー \end_layout \end_inset \end_layout \begin_layout Standard 表ツールバーは,表ダイアログの代わりに,表をすばやく変更できるようにするためのものです.通常,カーソルが表の内部にあるときに,\SpecialChar LyX のメインウィンドウの底部に表示され ます.ご希望であれば,\SpecialChar LyX のメインメニューバーを右クリックすることによって,つねに表示されるように切り替えることもできます. \end_layout \begin_layout Standard ツールバーには,以下のアイコンがあります. \end_layout \begin_layout Labeling \labelwidthstring 00.00.0000 \family sans \begin_inset Info type "icon" arg "tabular-feature append-row" \end_inset \family default は,現在セルあるいは選択範囲の下に行を追加します. \end_layout \begin_layout Labeling \labelwidthstring 00.00.0000 \family sans \begin_inset Info type "icon" arg "tabular-feature append-column" \end_inset \family default は,現在セルあるいは選択範囲の右に列を追加します. \end_layout \begin_layout Labeling \labelwidthstring 00.00.0000 \family sans \begin_inset Info type "icon" arg "tabular-feature delete-row" \end_inset \family default は,現在行あるいは選択範囲行を削除します. \end_layout \begin_layout Labeling \labelwidthstring 00.00.0000 \family sans \begin_inset Info type "icon" arg "tabular-feature delete-column" \end_inset \family default は,現在列あるいは選択範囲列を削除します. \end_layout \begin_layout Labeling \labelwidthstring 00.00.0000 \begin_inset Info type "icon" arg "tabular-feature move-row-up" \end_inset は,行を上に移動します. \end_layout \begin_layout Labeling \labelwidthstring 00.00.0000 \begin_inset Info type "icon" arg "tabular-feature move-column-left" \end_inset は,列を左に移動します. \end_layout \begin_layout Labeling \labelwidthstring 00.00.0000 \begin_inset Info type "icon" arg "tabular-feature move-row-down" \end_inset は,行を下に移動します. \end_layout \begin_layout Labeling \labelwidthstring 00.00.0000 \begin_inset Info type "icon" arg "tabular-feature move-column-right" \end_inset は,列を右に移動します. \end_layout \begin_layout Labeling \labelwidthstring 00.00.0000 \family sans \begin_inset Info type "icon" arg "tabular-feature toggle-line-top" \end_inset \family default は,現在セルや現在行,あるいは選択範囲の上部に罫線を描画します. \end_layout \begin_layout Labeling \labelwidthstring 00.00.0000 \family sans \begin_inset Info type "icon" arg "tabular-feature toggle-line-bottom" \end_inset \family default は,現在セルや現在行,あるいは選択範囲の下部に罫線を描画します. \end_layout \begin_layout Labeling \labelwidthstring 00.00.0000 \family sans \begin_inset Info type "icon" arg "tabular-feature toggle-line-left" \end_inset \family default は,現在セルや現在行,あるいは選択範囲の左側に罫線を描画します. \end_layout \begin_layout Labeling \labelwidthstring 00.00.0000 \family sans \begin_inset Info type "icon" arg "tabular-feature toggle-line-right" \end_inset \family default は,現在セルや現在行,あるいは選択範囲の右側に罫線を描画します. \end_layout \begin_layout Labeling \labelwidthstring 00.00.0000 \family sans \begin_inset Info type "icon" arg "tabular-feature set-all-lines" \end_inset \family default は,現在セルあるいは選択範囲の周囲に罫線を描画します.現在セルが連結列でなければ,現在行と現在列にも影響します. \end_layout \begin_layout Labeling \labelwidthstring 00.00.0000 \family sans \begin_inset Info type "icon" arg "tabular-feature unset-all-lines" \end_inset \family default は,現在セルあるいは選択範囲のすべての罫線を消去します.現在セルが連結列でなければ,現在行と現在列にも影響します. \end_layout \begin_layout Labeling \labelwidthstring 00.00.0000 \family sans \begin_inset Info type "icon" arg "tabular-feature m-align-left" \end_inset \family default は,現在セルあるいは現在列の内容を左揃えにします. \end_layout \begin_layout Labeling \labelwidthstring 00.00.0000 \family sans \begin_inset Info type "icon" arg "tabular-feature m-align-center" \end_inset \family default は,現在セルあるいは現在列の内容を水平方向中央揃えにします. \end_layout \begin_layout Labeling \labelwidthstring 00.00.0000 \family sans \begin_inset Info type "icon" arg "tabular-feature m-align-right" \end_inset \family default は,現在セルあるいは現在列の内容を右揃えにします. \end_layout \begin_layout Labeling \labelwidthstring 00.00.0000 \family sans \begin_inset Info type "icon" arg "tabular-feature align-decimal" \end_inset \family default は,現在セルの内容を特定文字位置で揃えます. \end_layout \begin_layout Labeling \labelwidthstring 00.00.0000 \family sans \begin_inset Info type "icon" arg "tabular-feature m-valign-top" \end_inset \family default は,現在セルの内容を垂直方向上揃えにします. \end_layout \begin_layout Labeling \labelwidthstring 00.00.0000 \family sans \begin_inset Info type "icon" arg "tabular-feature m-valign-middle" \end_inset \family default は,現在セルの内容を垂直方向中央揃えにします. \end_layout \begin_layout Labeling \labelwidthstring 00.00.0000 \family sans \begin_inset Info type "icon" arg "tabular-feature m-valign-bottom" \end_inset \family default は,現在セルの内容を垂直方向下揃えにします. \end_layout \begin_layout Labeling \labelwidthstring 00.00.0000 \family sans \begin_inset Info type "icon" arg "tabular-feature set-rotate-cell" \end_inset \family default は,現在セルあるいは選択範囲を反時計廻りに90度回転します. \end_layout \begin_layout Labeling \labelwidthstring 00.00.0000 \family sans \begin_inset Info type "icon" arg "tabular-feature set-rotate-tabular" \end_inset \family default は,表全体を反時計廻りに90度回転します. \end_layout \begin_layout Labeling \labelwidthstring 00.00.0000 \family sans \begin_inset Info type "icon" arg "tabular-feature multicolumn" \end_inset \family default は,現在セルあるいは選択範囲を連結列にします. \end_layout \begin_layout Labeling \labelwidthstring 00.00.0000 \family sans \begin_inset Info type "icon" arg "tabular-feature multirow" \end_inset \family default は,現在セルあるいは選択範囲を連結行にします. \end_layout \begin_layout Standard \begin_inset Note Greyedout status open \begin_layout Plain Layout \series bold 【註】 \series default 出力では,行の最初のセルの垂直揃えが,同一行の他のセルすべてに適用されます. \end_layout \end_inset \end_layout \begin_layout Section 表編集メニュー \begin_inset Index idx status collapsed \begin_layout Plain Layout ひょう@表 ! へんしゅうめにゅー@編集メニュー \end_layout \end_inset \end_layout \begin_layout Standard 表ダイアログと表ツールバーの他に, \family sans 編集\SpecialChar menuseparator 表 \family default メニューでも,現在行や現在列の罫線を引いたり消したりすることができ,あるいは現在の選択範囲を連結列に指定したりすることができます.このメニューは,カーソルが表内 部にあるときのみ,表示されます. \end_layout \begin_layout Section 表フロート \begin_inset CommandInset label LatexCommand label name "sec:表フロート" \end_inset \begin_inset Index idx status collapsed \begin_layout Plain Layout ふろーと@フロート ! ひょう@表 \end_layout \end_inset \begin_inset Index idx status collapsed \begin_layout Plain Layout ひょう@表 ! ふろーと@フロート \end_layout \end_inset \end_layout \begin_layout Standard フロートの一般的な説明については,第 \begin_inset CommandInset ref LatexCommand ref reference "sec:フロートはじめに" \end_inset 節をご覧下さい. \end_layout \begin_layout Standard \begin_inset Float table placement h wide false sideways false status open \begin_layout Plain Layout \begin_inset Caption Standard \begin_layout Plain Layout \begin_inset CommandInset label LatexCommand label name "tab:表フロート" \end_inset 表フロート \end_layout \end_inset \end_layout \begin_layout Plain Layout \align center \begin_inset Tabular <lyxtabular version="3" rows="3" columns="3"> <features tabularvalignment="middle"> <column alignment="center" valignment="top" width="0pt"> <column alignment="center" valignment="top" width="0pt"> <column alignment="center" valignment="top" width="0pt"> <row> <cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \family roman \series medium \shape up \size normal \emph off \bar no \noun off \color none 1 \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \family roman \series medium \shape up \size normal \emph off \bar no \noun off \color none 2 \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \family roman \series medium \shape up \size normal \emph off \bar no \noun off \color none 3 \end_layout \end_inset </cell> </row> <row> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 森嶋 \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 宇沢 \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 二階堂 \end_layout \end_inset </cell> </row> <row> <cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \family roman \series medium \shape up \size normal \emph off \bar no \noun off \color none \begin_inset Formula $\int x^{2}dx$ \end_inset \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \family roman \series medium \shape up \size normal \emph off \bar no \noun off \color none \begin_inset Formula $\left[\begin{array}{cc} a & b\\ c & d \end{array}\right]$ \end_inset \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \family roman \series medium \shape up \size normal \emph off \bar no \noun off \color none \begin_inset Formula $1+1=2$ \end_inset \end_layout \end_inset </cell> </row> </lyxtabular> \end_inset \end_layout \end_inset \end_layout \begin_layout Standard 表フロートは, \family sans 挿入 \shape up \SpecialChar menuseparator フロート\SpecialChar menuseparator 表 \family default \shape default メニューかツールバーボタン \family sans \begin_inset Info type "icon" arg "float-insert table" \end_inset \family default を使うと挿入することができます. \end_layout \begin_layout Standard フロートは折りたたむことのできるボックスとして表示され,中には「表 \begin_inset space ~ \end_inset #:」(#は実際には表番号です)というラベルのついたキャプションがあります.表は,このキャプションの上にも下にも入れることができます. \end_layout \begin_layout Standard 表 \begin_inset space ~ \end_inset \begin_inset CommandInset ref LatexCommand ref reference "tab:表フロート" \end_inset は,表フロートに入れた表の例です. \end_layout \begin_layout Standard キャプションを表の上に入れるのは,標準的な組版方法ですが,残念ながら\SpecialChar LaTeX の標準クラスではサポートされていません.つまり,article・book・letter・re portのような文書クラスを使用した場合には,キャプションと表のあいだに余白が入りません.必要な余白を入れるには,使用中の文書のプリアンブルに,LaTeXパッケ ージの \series bold caption \series default \begin_inset Index idx status collapsed \begin_layout Plain Layout \SpecialChar LaTeX ぱっけーじ@\SpecialChar LaTeX パッケージ ! caption \end_layout \end_inset を \end_layout \begin_layout Standard \series bold tableposition=top \end_layout \begin_layout Standard というオプションとともにloadコマンドを使って読み込んでください \begin_inset Foot status collapsed \begin_layout Plain Layout 詳しくは,第 \begin_inset CommandInset ref LatexCommand ref reference "sec:キャプションの配置" \end_inset 節をご覧下さい. \end_layout \end_inset .キャプション書式を調整するには,第 \begin_inset CommandInset ref LatexCommand ref reference "sec:キャプションの書式設定" \end_inset 節にものべられているように \series bold caption \series default パッケージを使用します. \end_layout \begin_layout Standard \begin_inset Index idx status collapsed \begin_layout Plain Layout さんしょう@参照 ! ひょうへの@表への \end_layout \end_inset 表は,本文中において,ラベルを参照することによって相互参照することができます.そのためには, \family sans 挿入\SpecialChar menuseparator ラベル \family default メニューかツールバーボタンの \family sans \begin_inset Info type "icon" arg "label-insert" \end_inset \family default を用いて,キャプションにラベルを挿入して下さい.然る後に,挿入\SpecialChar menuseparator 相互参照メニューかツールバーボタンの \family sans \begin_inset Info type "icon" arg "dialog-show-new-inset ref" \end_inset \family default を用いて,このラベルを参照することができます. \begin_inset Newline newline \end_inset 参照は,第 \begin_inset CommandInset ref LatexCommand ref reference "sec:フロートの参照" \end_inset 節で詳細に説明されています. \end_layout \begin_layout Section 多頁表 \begin_inset CommandInset label LatexCommand label name "sec:多頁表" \end_inset \begin_inset Index idx status collapsed \begin_layout Plain Layout たへえしひよう@多頁表 \end_layout \end_inset \begin_inset Index idx status collapsed \begin_layout Plain Layout ひょう@表 ! たへえしひよう@多頁— \end_layout \end_inset \end_layout \begin_layout Standard 表が長すぎて1ページに収まりきらないときには,表ダイアログの \family sans 多頁表 \family default タブにある \family sans 多頁表を使う \family default オプションを使用して,複数ページに自動的に分割させることができます.このオプションを有効にすると,いくつかのチェックボックスが使えるようになり,以下のものを定義 することができるようになります. \end_layout \begin_layout Description ヘッダ: カーソル位置の行が,多頁表の全ページに表示されるヘッダ行として定義されます. \family roman \series medium \shape up \size normal \emph off \bar no \noun off \color none ただし, \family sans \series default \shape default \size default \emph default \bar default \noun default \color inherit 冒頭ヘッダ \family roman \series medium \shape up \size normal \emph off \bar no \noun off \color none が定義されているときは,冒頭ページを除きます. \family default \series default \shape default \size default \emph default \bar default \noun default \color inherit これと区別して,このヘッダは本体ヘッダと呼びます. \end_layout \begin_layout Description 冒頭ヘッダ: カーソル位置の行が,多頁表の最初のページに表示されるヘッダ行として定義されます. \end_layout \begin_layout Description フッタ: カーソル位置の行が,多頁表の全ページに表示されるフッタ行として定義されます. \family roman \series medium \shape up \size normal \emph off \bar no \noun off \color none ただし, \family sans \series default \shape default \size default \emph default \bar default \noun default \color inherit 末尾フッタ \family roman \series medium \shape up \size normal \emph off \bar no \noun off \color none が定義されているときは,末尾ページを除きます. \end_layout \begin_layout Description 末尾フッタ: カーソル位置の行が,多頁表の最後のページに表示されるフッタ行として定義されます. \end_layout \begin_layout Description キャプション: カーソル位置の行を表のキャプションにします.この行は一列にリセットされ,キャプションが挿入されます.多頁表のキャプションについての詳細は,第 \begin_inset CommandInset ref LatexCommand ref reference "subsec:多頁表のキャプション" \end_inset 節で説明されています. \end_layout \begin_layout Standard 加えて,表が分割される行を指定することができます.多頁表の動作を見るために以下の例を参照してください. \end_layout \begin_layout Standard \align center \begin_inset Tabular <lyxtabular version="3" rows="69" columns="3"> <features islongtable="true" longtabularalignment="center"> <column alignment="left" valignment="top" width="0cm"> <column alignment="left" valignment="top" width="0pt"> <column alignment="center" valignment="top" width="0pt"> <row endfirsthead="true"> <cell multicolumn="1" alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \series bold 例示用電話帳(名前は無視してください) \end_layout \end_inset </cell> <cell multicolumn="2" alignment="center" valignment="top" topline="true" bottomline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \end_layout \end_inset </cell> <cell multicolumn="2" alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \end_layout \end_inset </cell> </row> <row endfirsthead="true"> <cell multicolumn="1" alignment="center" valignment="top" bottomline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 氏名 \end_layout \end_inset </cell> <cell multicolumn="2" alignment="center" valignment="top" topline="true" bottomline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \end_layout \end_inset </cell> <cell alignment="center" valignment="top" bottomline="true" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \series bold TEL. \end_layout \end_inset </cell> </row> <row endhead="true"> <cell multicolumn="1" alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \series bold 例示用電話帳 \end_layout \end_inset </cell> <cell multicolumn="2" alignment="center" valignment="top" topline="true" bottomline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \end_layout \end_inset </cell> <cell multicolumn="2" alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \end_layout \end_inset </cell> </row> <row endhead="true"> <cell multicolumn="1" alignment="center" valignment="top" bottomline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 氏名 \end_layout \end_inset </cell> <cell multicolumn="2" alignment="center" valignment="top" topline="true" bottomline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \end_layout \end_inset </cell> <cell alignment="center" valignment="top" bottomline="true" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \series bold TEL. \end_layout \end_inset </cell> </row> <row endfoot="true"> <cell multicolumn="1" alignment="right" valignment="top" usebox="none"> \begin_inset Text \begin_layout Plain Layout 次頁へつづく \end_layout \end_inset </cell> <cell multicolumn="2" alignment="center" valignment="top" topline="true" bottomline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \end_layout \end_inset </cell> <cell multicolumn="2" alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \end_layout \end_inset </cell> </row> <row> <cell alignment="center" valignment="top" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \series bold Annovi \end_layout \end_inset </cell> <cell alignment="center" valignment="top" usebox="none"> \begin_inset Text \begin_layout Plain Layout Silvia \end_layout \end_inset </cell> <cell alignment="right" valignment="top" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 111 \end_layout \end_inset </cell> </row> <row> <cell alignment="center" valignment="top" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \series bold Bertoli \end_layout \end_inset </cell> <cell alignment="center" valignment="top" usebox="none"> \begin_inset Text \begin_layout Plain Layout Stefano \end_layout \end_inset </cell> <cell alignment="center" valignment="top" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 111 \end_layout \end_inset </cell> </row> <row> <cell alignment="center" valignment="top" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \series bold Bozzi \end_layout \end_inset </cell> <cell alignment="center" valignment="top" usebox="none"> \begin_inset Text \begin_layout Plain Layout Walter \end_layout \end_inset </cell> <cell alignment="center" valignment="top" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 111 \end_layout \end_inset </cell> </row> <row> <cell alignment="center" valignment="top" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \series bold Cachia \end_layout \end_inset </cell> <cell alignment="center" valignment="top" usebox="none"> \begin_inset Text \begin_layout Plain Layout Maria \end_layout \end_inset </cell> <cell alignment="center" valignment="top" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 111 \end_layout \end_inset </cell> </row> <row> <cell alignment="center" valignment="top" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \series bold Cachia \end_layout \end_inset </cell> <cell alignment="center" valignment="top" usebox="none"> \begin_inset Text \begin_layout Plain Layout Maurizio \end_layout \end_inset </cell> <cell alignment="center" valignment="top" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 111 \end_layout \end_inset </cell> </row> <row> <cell alignment="center" valignment="top" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \series bold Cinquemani \end_layout \end_inset </cell> <cell alignment="center" valignment="top" usebox="none"> \begin_inset Text \begin_layout Plain Layout Giusi \end_layout \end_inset </cell> <cell alignment="center" valignment="top" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 111 \end_layout \end_inset </cell> </row> <row> <cell alignment="center" valignment="top" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \series bold Colin \end_layout \end_inset </cell> <cell alignment="center" valignment="top" usebox="none"> \begin_inset Text \begin_layout Plain Layout Bernard \end_layout \end_inset </cell> <cell alignment="center" valignment="top" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 111 \end_layout \end_inset </cell> </row> <row> <cell alignment="center" valignment="top" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \series bold Concli \end_layout \end_inset </cell> <cell alignment="center" valignment="top" usebox="none"> \begin_inset Text \begin_layout Plain Layout Gianfranco \end_layout \end_inset </cell> <cell alignment="center" valignment="top" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 111 \end_layout \end_inset </cell> </row> <row> <cell alignment="center" valignment="top" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \series bold Dal Bosco \end_layout \end_inset </cell> <cell alignment="center" valignment="top" usebox="none"> \begin_inset Text \begin_layout Plain Layout Carolina \end_layout \end_inset </cell> <cell alignment="center" valignment="top" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 111 \end_layout \end_inset </cell> </row> <row> <cell alignment="center" valignment="top" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \series bold Dalpiaz \end_layout \end_inset </cell> <cell alignment="center" valignment="top" usebox="none"> \begin_inset Text \begin_layout Plain Layout Annamaria \end_layout \end_inset </cell> <cell alignment="center" valignment="top" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 111 \end_layout \end_inset </cell> </row> <row> <cell alignment="center" valignment="top" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \series bold Feliciello \end_layout \end_inset </cell> <cell alignment="center" valignment="top" usebox="none"> \begin_inset Text \begin_layout Plain Layout Domenico \end_layout \end_inset </cell> <cell alignment="center" valignment="top" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 111 \end_layout \end_inset </cell> </row> <row> <cell alignment="center" valignment="top" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \series bold Focarelli \end_layout \end_inset </cell> <cell alignment="center" valignment="top" usebox="none"> \begin_inset Text \begin_layout Plain Layout Paola \end_layout \end_inset </cell> <cell alignment="center" valignment="top" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 111 \end_layout \end_inset </cell> </row> <row> <cell alignment="center" valignment="top" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \series bold Galletti \end_layout \end_inset </cell> <cell alignment="center" valignment="top" usebox="none"> \begin_inset Text \begin_layout Plain Layout Oreste \end_layout \end_inset </cell> <cell alignment="center" valignment="top" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 111 \end_layout \end_inset </cell> </row> <row> <cell alignment="center" valignment="top" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \series bold Gasparini \end_layout \end_inset </cell> <cell alignment="center" valignment="top" usebox="none"> \begin_inset Text \begin_layout Plain Layout Franca \end_layout \end_inset </cell> <cell alignment="center" valignment="top" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 111 \end_layout \end_inset </cell> </row> <row> <cell alignment="center" valignment="top" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \series bold Rizzardi \end_layout \end_inset </cell> <cell alignment="center" valignment="top" usebox="none"> \begin_inset Text \begin_layout Plain Layout Paola \end_layout \end_inset </cell> <cell alignment="center" valignment="top" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 111 \end_layout \end_inset </cell> </row> <row> <cell alignment="center" valignment="top" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \series bold Lassini \end_layout \end_inset </cell> <cell alignment="center" valignment="top" usebox="none"> \begin_inset Text \begin_layout Plain Layout Giancarlo \end_layout \end_inset </cell> <cell alignment="center" valignment="top" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 111 \end_layout \end_inset </cell> </row> <row> <cell alignment="center" valignment="top" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \series bold Malfatti \end_layout \end_inset </cell> <cell alignment="center" valignment="top" usebox="none"> \begin_inset Text \begin_layout Plain Layout Luciano \end_layout \end_inset </cell> <cell alignment="center" valignment="top" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 111 \end_layout \end_inset </cell> </row> <row> <cell alignment="center" valignment="top" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \series bold Malfatti \end_layout \end_inset </cell> <cell alignment="center" valignment="top" usebox="none"> \begin_inset Text \begin_layout Plain Layout Valeriano \end_layout \end_inset </cell> <cell alignment="center" valignment="top" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 111 \end_layout \end_inset </cell> </row> <row> <cell alignment="center" valignment="top" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \series bold Meneguzzo \end_layout \end_inset </cell> <cell alignment="center" valignment="top" usebox="none"> \begin_inset Text \begin_layout Plain Layout Roberto \end_layout \end_inset </cell> <cell alignment="center" valignment="top" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 111 \end_layout \end_inset </cell> </row> <row> <cell alignment="center" valignment="top" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \series bold Mezzadra \end_layout \end_inset </cell> <cell alignment="center" valignment="top" usebox="none"> \begin_inset Text \begin_layout Plain Layout Roberto \end_layout \end_inset </cell> <cell alignment="center" valignment="top" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 111 \end_layout \end_inset </cell> </row> <row> <cell alignment="center" valignment="top" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \series bold Pirpamer \end_layout \end_inset </cell> <cell alignment="center" valignment="top" usebox="none"> \begin_inset Text \begin_layout Plain Layout Erich \end_layout \end_inset </cell> <cell alignment="center" valignment="top" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 111 \end_layout \end_inset </cell> </row> <row> <cell alignment="center" valignment="top" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \series bold Pochiesa \end_layout \end_inset </cell> <cell alignment="center" valignment="top" usebox="none"> \begin_inset Text \begin_layout Plain Layout Paolo \end_layout \end_inset </cell> <cell alignment="center" valignment="top" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 111, 222 \end_layout \end_inset </cell> </row> <row> <cell alignment="center" valignment="top" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \series bold Radina \end_layout \end_inset </cell> <cell alignment="center" valignment="top" usebox="none"> \begin_inset Text \begin_layout Plain Layout Claudio \end_layout \end_inset </cell> <cell alignment="center" valignment="top" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 111 \end_layout \end_inset </cell> </row> <row> <cell alignment="center" valignment="top" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \series bold Stuffer \end_layout \end_inset </cell> <cell alignment="center" valignment="top" usebox="none"> \begin_inset Text \begin_layout Plain Layout Oskar \end_layout \end_inset </cell> <cell alignment="center" valignment="top" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 111 \end_layout \end_inset </cell> </row> <row> <cell alignment="center" valignment="top" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \series bold Tacchelli \end_layout \end_inset </cell> <cell alignment="center" valignment="top" usebox="none"> \begin_inset Text \begin_layout Plain Layout Ugo \end_layout \end_inset </cell> <cell alignment="center" valignment="top" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 111 \end_layout \end_inset </cell> </row> <row> <cell alignment="center" valignment="top" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \series bold Tezzele \end_layout \end_inset </cell> <cell alignment="center" valignment="top" usebox="none"> \begin_inset Text \begin_layout Plain Layout Margit \end_layout \end_inset </cell> <cell alignment="center" valignment="top" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 111 \end_layout \end_inset </cell> </row> <row> <cell alignment="center" valignment="top" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \series bold Unterkalmsteiner \end_layout \end_inset </cell> <cell alignment="center" valignment="top" usebox="none"> \begin_inset Text \begin_layout Plain Layout Frieda \end_layout \end_inset </cell> <cell alignment="center" valignment="top" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 111 \end_layout \end_inset </cell> </row> <row> <cell alignment="center" valignment="top" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \series bold Vieider \end_layout \end_inset </cell> <cell alignment="center" valignment="top" usebox="none"> \begin_inset Text \begin_layout Plain Layout Hilde \end_layout \end_inset </cell> <cell alignment="center" valignment="top" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 111 \end_layout \end_inset </cell> </row> <row> <cell alignment="center" valignment="top" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \series bold Vigna \end_layout \end_inset </cell> <cell alignment="center" valignment="top" usebox="none"> \begin_inset Text \begin_layout Plain Layout Jürgen \end_layout \end_inset </cell> <cell alignment="center" valignment="top" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 111 \end_layout \end_inset </cell> </row> <row> <cell alignment="center" valignment="top" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \series bold Weber \end_layout \end_inset </cell> <cell alignment="center" valignment="top" usebox="none"> \begin_inset Text \begin_layout Plain Layout Maurizio \end_layout \end_inset </cell> <cell alignment="center" valignment="top" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 111 \end_layout \end_inset </cell> </row> <row> <cell alignment="center" valignment="top" bottomline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \series bold Winkler \end_layout \end_inset </cell> <cell alignment="center" valignment="top" bottomline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout Franz \end_layout \end_inset </cell> <cell alignment="center" valignment="top" bottomline="true" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 111 \end_layout \end_inset </cell> </row> <row> <cell multicolumn="1" alignment="left" valignment="top" bottomline="true" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \end_layout \end_inset </cell> <cell multicolumn="2" alignment="center" valignment="top" topline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \end_layout \end_inset </cell> <cell multicolumn="2" alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \end_layout \end_inset </cell> </row> <row> <cell alignment="left" valignment="top" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \series bold Annovi \end_layout \end_inset </cell> <cell alignment="center" valignment="top" usebox="none"> \begin_inset Text \begin_layout Plain Layout Silvia \end_layout \end_inset </cell> <cell alignment="center" valignment="top" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 555 \end_layout \end_inset </cell> </row> <row> <cell alignment="left" valignment="top" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \series bold Bertoli \end_layout \end_inset </cell> <cell alignment="center" valignment="top" usebox="none"> \begin_inset Text \begin_layout Plain Layout Stefano \end_layout \end_inset </cell> <cell alignment="center" valignment="top" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 555 \end_layout \end_inset </cell> </row> <row> <cell alignment="left" valignment="top" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \series bold Bozzi \end_layout \end_inset </cell> <cell alignment="center" valignment="top" usebox="none"> \begin_inset Text \begin_layout Plain Layout Walter \end_layout \end_inset </cell> <cell alignment="center" valignment="top" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 555 \end_layout \end_inset </cell> </row> <row> <cell alignment="left" valignment="top" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \series bold Cachia \end_layout \end_inset </cell> <cell alignment="center" valignment="top" usebox="none"> \begin_inset Text \begin_layout Plain Layout Maria \end_layout \end_inset </cell> <cell alignment="center" valignment="top" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 555 \end_layout \end_inset </cell> </row> <row> <cell alignment="left" valignment="top" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \series bold Cachia \end_layout \end_inset </cell> <cell alignment="center" valignment="top" usebox="none"> \begin_inset Text \begin_layout Plain Layout Maurizio \end_layout \end_inset </cell> <cell alignment="center" valignment="top" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 555 \end_layout \end_inset </cell> </row> <row> <cell alignment="left" valignment="top" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \series bold Cinquemani \end_layout \end_inset </cell> <cell alignment="center" valignment="top" usebox="none"> \begin_inset Text \begin_layout Plain Layout Giusi \end_layout \end_inset </cell> <cell alignment="center" valignment="top" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 555 \end_layout \end_inset </cell> </row> <row> <cell alignment="left" valignment="top" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \series bold Colin \end_layout \end_inset </cell> <cell alignment="center" valignment="top" usebox="none"> \begin_inset Text \begin_layout Plain Layout Bernard \end_layout \end_inset </cell> <cell alignment="center" valignment="top" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 555 \end_layout \end_inset </cell> </row> <row> <cell alignment="left" valignment="top" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \series bold Concli \end_layout \end_inset </cell> <cell alignment="center" valignment="top" usebox="none"> \begin_inset Text \begin_layout Plain Layout Gianfranco \end_layout \end_inset </cell> <cell alignment="center" valignment="top" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 555 \end_layout \end_inset </cell> </row> <row> <cell alignment="left" valignment="top" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \series bold Dal Bosco \end_layout \end_inset </cell> <cell alignment="center" valignment="top" usebox="none"> \begin_inset Text \begin_layout Plain Layout Carolina \end_layout \end_inset </cell> <cell alignment="center" valignment="top" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 555 \end_layout \end_inset </cell> </row> <row> <cell alignment="left" valignment="top" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \series bold Dalpiaz \end_layout \end_inset </cell> <cell alignment="center" valignment="top" usebox="none"> \begin_inset Text \begin_layout Plain Layout Annamaria \end_layout \end_inset </cell> <cell alignment="center" valignment="top" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 555 \end_layout \end_inset </cell> </row> <row> <cell alignment="left" valignment="top" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \series bold Feliciello \end_layout \end_inset </cell> <cell alignment="center" valignment="top" usebox="none"> \begin_inset Text \begin_layout Plain Layout Domenico \end_layout \end_inset </cell> <cell alignment="center" valignment="top" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 555 \end_layout \end_inset </cell> </row> <row> <cell alignment="left" valignment="top" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \series bold Focarelli \end_layout \end_inset </cell> <cell alignment="center" valignment="top" usebox="none"> \begin_inset Text \begin_layout Plain Layout Paola \end_layout \end_inset </cell> <cell alignment="center" valignment="top" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 555 \end_layout \end_inset </cell> </row> <row> <cell alignment="left" valignment="top" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \series bold Galletti \end_layout \end_inset </cell> <cell alignment="center" valignment="top" usebox="none"> \begin_inset Text \begin_layout Plain Layout Oreste \end_layout \end_inset </cell> <cell alignment="center" valignment="top" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 555 \end_layout \end_inset </cell> </row> <row> <cell alignment="left" valignment="top" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \series bold Gasparini \end_layout \end_inset </cell> <cell alignment="center" valignment="top" usebox="none"> \begin_inset Text \begin_layout Plain Layout Franca \end_layout \end_inset </cell> <cell alignment="center" valignment="top" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 555 \end_layout \end_inset </cell> </row> <row> <cell alignment="left" valignment="top" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \series bold Rizzardi \end_layout \end_inset </cell> <cell alignment="center" valignment="top" usebox="none"> \begin_inset Text \begin_layout Plain Layout Paola \end_layout \end_inset </cell> <cell alignment="center" valignment="top" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 555 \end_layout \end_inset </cell> </row> <row> <cell alignment="left" valignment="top" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \series bold Lassini \end_layout \end_inset </cell> <cell alignment="center" valignment="top" usebox="none"> \begin_inset Text \begin_layout Plain Layout Giancarlo \end_layout \end_inset </cell> <cell alignment="center" valignment="top" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 555 \end_layout \end_inset </cell> </row> <row> <cell alignment="left" valignment="top" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \series bold Malfatti \end_layout \end_inset </cell> <cell alignment="center" valignment="top" usebox="none"> \begin_inset Text \begin_layout Plain Layout Luciano \end_layout \end_inset </cell> <cell alignment="center" valignment="top" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 555 \end_layout \end_inset </cell> </row> <row> <cell alignment="left" valignment="top" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \series bold Malfatti \end_layout \end_inset </cell> <cell alignment="center" valignment="top" usebox="none"> \begin_inset Text \begin_layout Plain Layout Valeriano \end_layout \end_inset </cell> <cell alignment="center" valignment="top" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 555 \end_layout \end_inset </cell> </row> <row> <cell alignment="left" valignment="top" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \series bold Meneguzzo \end_layout \end_inset </cell> <cell alignment="center" valignment="top" usebox="none"> \begin_inset Text \begin_layout Plain Layout Roberto \end_layout \end_inset </cell> <cell alignment="center" valignment="top" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 555 \end_layout \end_inset </cell> </row> <row> <cell alignment="left" valignment="top" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \series bold Mezzadra \end_layout \end_inset </cell> <cell alignment="center" valignment="top" usebox="none"> \begin_inset Text \begin_layout Plain Layout Roberto \end_layout \end_inset </cell> <cell alignment="center" valignment="top" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 555 \end_layout \end_inset </cell> </row> <row> <cell alignment="left" valignment="top" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \series bold Pirpamer \end_layout \end_inset </cell> <cell alignment="center" valignment="top" usebox="none"> \begin_inset Text \begin_layout Plain Layout Erich \end_layout \end_inset </cell> <cell alignment="center" valignment="top" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 555 \end_layout \end_inset </cell> </row> <row> <cell alignment="left" valignment="top" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \series bold Pochiesa \end_layout \end_inset </cell> <cell alignment="center" valignment="top" usebox="none"> \begin_inset Text \begin_layout Plain Layout Paolo \end_layout \end_inset </cell> <cell alignment="center" valignment="top" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 555, 222 \end_layout \end_inset </cell> </row> <row> <cell alignment="left" valignment="top" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \series bold Radina \end_layout \end_inset </cell> <cell alignment="center" valignment="top" usebox="none"> \begin_inset Text \begin_layout Plain Layout Claudio \end_layout \end_inset </cell> <cell alignment="center" valignment="top" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 555 \end_layout \end_inset </cell> </row> <row> <cell alignment="left" valignment="top" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \series bold Stuffer \end_layout \end_inset </cell> <cell alignment="center" valignment="top" usebox="none"> \begin_inset Text \begin_layout Plain Layout Oskar \end_layout \end_inset </cell> <cell alignment="center" valignment="top" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 555 \end_layout \end_inset </cell> </row> <row> <cell alignment="left" valignment="top" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \series bold Tacchelli \end_layout \end_inset </cell> <cell alignment="center" valignment="top" usebox="none"> \begin_inset Text \begin_layout Plain Layout Ugo \end_layout \end_inset </cell> <cell alignment="center" valignment="top" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 555 \end_layout \end_inset </cell> </row> <row> <cell alignment="left" valignment="top" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \series bold Tezzele \end_layout \end_inset </cell> <cell alignment="center" valignment="top" usebox="none"> \begin_inset Text \begin_layout Plain Layout Margit \end_layout \end_inset </cell> <cell alignment="center" valignment="top" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 555 \end_layout \end_inset </cell> </row> <row> <cell alignment="left" valignment="top" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \series bold Unterkalmsteiner \end_layout \end_inset </cell> <cell alignment="center" valignment="top" usebox="none"> \begin_inset Text \begin_layout Plain Layout Frieda \end_layout \end_inset </cell> <cell alignment="center" valignment="top" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 555 \end_layout \end_inset </cell> </row> <row> <cell alignment="left" valignment="top" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \series bold Vieider \end_layout \end_inset </cell> <cell alignment="center" valignment="top" usebox="none"> \begin_inset Text \begin_layout Plain Layout Hilde \end_layout \end_inset </cell> <cell alignment="center" valignment="top" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 555 \end_layout \end_inset </cell> </row> <row> <cell alignment="left" valignment="top" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \series bold Vigna \end_layout \end_inset </cell> <cell alignment="center" valignment="top" usebox="none"> \begin_inset Text \begin_layout Plain Layout Jürgen \end_layout \end_inset </cell> <cell alignment="center" valignment="top" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 999 \end_layout \end_inset </cell> </row> <row> <cell alignment="left" valignment="top" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \series bold Weber \end_layout \end_inset </cell> <cell alignment="center" valignment="top" usebox="none"> \begin_inset Text \begin_layout Plain Layout Maurizio \end_layout \end_inset </cell> <cell alignment="center" valignment="top" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 555 \end_layout \end_inset </cell> </row> <row> <cell alignment="left" valignment="top" bottomline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \series bold Winkler \end_layout \end_inset </cell> <cell alignment="center" valignment="top" bottomline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout Franz \end_layout \end_inset </cell> <cell alignment="center" valignment="top" bottomline="true" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 555 \end_layout \end_inset </cell> </row> <row endlastfoot="true"> <cell multicolumn="1" alignment="right" valignment="top" usebox="none"> \begin_inset Text \begin_layout Plain Layout 以上 \end_layout \end_inset </cell> <cell multicolumn="2" alignment="center" valignment="top" topline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \end_layout \end_inset </cell> <cell multicolumn="2" alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \end_layout \end_inset </cell> </row> </lyxtabular> \end_inset \begin_inset ERT status collapsed \begin_layout Plain Layout \backslash addtocounter{table}{-1} \end_layout \end_inset \begin_inset Note Note status collapsed \begin_layout Plain Layout 本コマンドの説明については,第 \begin_inset CommandInset ref LatexCommand ref reference "subsec:多頁表のキャプション" \end_inset 節の最初の淡色註釈をご覧下さい. \end_layout \end_inset \end_layout \begin_layout Subsection 多頁表での脚註 \begin_inset CommandInset label LatexCommand label name "subsec:多頁表での脚注" \end_inset \begin_inset Index idx status collapsed \begin_layout Plain Layout たへえしひよう@多頁表 ! きやくちゆう@脚註 \end_layout \end_inset \end_layout \begin_layout Standard 脚註は,どの多頁表セルにも入れることができます.脚註は,脚註のついた表セルのあるページの下部に表示されます.たとえば,表 \begin_inset CommandInset ref LatexCommand ref reference "tab:別キャプション" \end_inset には脚註が付いています. \end_layout \begin_layout Subsection 多頁表の縦横揃え \begin_inset Index idx status collapsed \begin_layout Plain Layout たへえしひよう@多頁表 ! たてよこぞろえ@縦横揃え \end_layout \end_inset \end_layout \begin_layout Standard 表設定ダイアログでは,多頁表の水平揃えを指定することができます.左揃えや右揃えでは,表は直接ページ境界に寄せられます.表と境界の間に余白を加えるには,中央揃えに 設定してから \end_layout \begin_layout Standard \series bold \backslash setlength{ \backslash LTleft}{値} \end_layout \begin_layout Standard という行を当該多頁表の前に\SpecialChar TeX コードとして挿入して,長さ \series bold \backslash LTleft \series default および \series bold \backslash LTright \series default の値を変更しなくてはなりません.ここで「値」は,第 \begin_inset CommandInset ref LatexCommand ref reference "tab:単位" \end_inset 表に挙げてある単位であれば,どの単位を取ることもできます. \series bold \backslash LTleft \series default は,左頁余白から多頁表までの水平方向の距離を制御し, \series bold \backslash LTright \series default は,右頁余白からの距離を制御します.これらの長さの既定値は \series bold \backslash fill \series default となっており,\SpecialChar LyX の水平フィルと同等になっています. \end_layout \begin_layout Standard 以下の多頁表は,中央揃えの上, \series bold \backslash LTleft \series default を \family sans 0.1 \backslash columnwidth \family default に設定してあります. \begin_inset ERT status collapsed \begin_layout Plain Layout \backslash setlength{ \backslash LTleft}{0.1 \backslash columnwidth} \end_layout \end_inset \end_layout \begin_layout Standard \begin_inset Tabular <lyxtabular version="3" rows="5" columns="5"> <features islongtable="true" longtabularalignment="center"> <column alignment="center" valignment="top"> <column alignment="center" valignment="top"> <column alignment="center" valignment="top"> <column alignment="center" valignment="top"> <column alignment="center" valignment="top"> <row> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 1 \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 2 \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 3 \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 4 \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 5 \end_layout \end_inset </cell> </row> <row> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout いろは \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout ろ \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout ろ \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout ろ \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout いろは \end_layout \end_inset </cell> </row> <row> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout いろは \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout ろ \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout ろ \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout ろ \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout いろは \end_layout \end_inset </cell> </row> <row> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout いろは \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout ろ \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout ろ \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout ろ \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout いろは \end_layout \end_inset </cell> </row> <row> <cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout いろは \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout いろは \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout いろは \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout いろは \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout いろは \end_layout \end_inset </cell> </row> </lyxtabular> \end_inset \begin_inset ERT status collapsed \begin_layout Plain Layout \backslash setlength{ \backslash LTleft}{ \backslash fill} \end_layout \end_inset \begin_inset ERT status collapsed \begin_layout Plain Layout \backslash addtocounter{table}{-1} \end_layout \end_inset \begin_inset Note Note status collapsed \begin_layout Plain Layout このコマンドの説明に関しては,第 \begin_inset CommandInset ref LatexCommand ref reference "subsec:多頁表のキャプション" \end_inset 節の最初の淡色註釈をご覧下さい. \end_layout \end_inset \end_layout \begin_layout Subsection 多頁表のキャプション \begin_inset Index idx status collapsed \begin_layout Plain Layout たへえしひよう@多頁表 ! きやふしよん@キャプション \end_layout \end_inset \begin_inset CommandInset label LatexCommand label name "subsec:多頁表のキャプション" \end_inset \end_layout \begin_layout Standard フロートは一頁に収まらなくてはならないので,多頁表を表フロートに入れることはできません.しかし,第 \begin_inset CommandInset ref LatexCommand ref reference "sec:多頁表" \end_inset 節に述べられているように,ある行で多頁表オプションの \family sans キャプション \family default を使用すれば,フロートのキャプション環境を多頁表でも使用することができます.キャプションは, \family sans 冒頭ヘッダ \family default ・ \family sans ヘッダ \family default ・ \family sans フッタ \family default ・ \family sans 末尾フッタ \family default のいずれかに入れなくてはなりません.それぞれのヘッダ・フッタに入れることができる行は,ひとつだけです. \end_layout \begin_layout Standard 以下は,動作を確認するための短い多頁表です. \end_layout \begin_layout Standard \begin_inset Tabular <lyxtabular version="3" rows="6" columns="5"> <features islongtable="true" longtabularalignment="center"> <column alignment="center" valignment="top"> <column alignment="center" valignment="top"> <column alignment="center" valignment="top"> <column alignment="center" valignment="top"> <column alignment="center" valignment="top"> <row endfirsthead="true" caption="true"> <cell multicolumn="1" alignment="center" valignment="top" usebox="none"> \begin_inset Text \begin_layout Plain Layout \begin_inset Caption Standard \begin_layout Plain Layout キャプション付き多頁表 \begin_inset Argument 1 status collapsed \begin_layout Plain Layout 多頁表 \end_layout \end_inset \end_layout \end_inset \end_layout \end_inset </cell> <cell multicolumn="2" alignment="center" valignment="top" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \end_layout \end_inset </cell> <cell multicolumn="2" alignment="center" valignment="top" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \end_layout \end_inset </cell> <cell multicolumn="2" alignment="center" valignment="top" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \end_layout \end_inset </cell> <cell multicolumn="2" alignment="center" valignment="top" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \end_layout \end_inset </cell> </row> <row> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 1 \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 2 \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 3 \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 4 \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 5 \end_layout \end_inset </cell> </row> <row> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout いろは \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout ろ \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout ろ \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout ろ \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout いろは \end_layout \end_inset </cell> </row> <row> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout いろは \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout ろ \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout ろ \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout ろ \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout いろは \end_layout \end_inset </cell> </row> <row> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout いろは \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout ろ \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout ろ \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout ろ \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout いろは \end_layout \end_inset </cell> </row> <row> <cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout いろは \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout いろは \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout いろは \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout いろは \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout いろは \end_layout \end_inset </cell> </row> </lyxtabular> \end_inset \end_layout \begin_layout Standard \begin_inset VSpace medskip \end_inset \begin_inset Note Greyedout status open \begin_layout Plain Layout \series bold 【註1】 \series default 表番号は,多頁表にキャプションを付けなかったとしても,各多頁表毎に加番されます.このため,あいだにキャプションのない二つの多頁表が挟まっていたならば,表一覧では ,たとえば表2.1の後に表2.4が来ることがあります.これを回避するためには,キャプションのないすべての多頁表の後に,\SpecialChar TeX コードで \end_layout \begin_layout Plain Layout \series bold \backslash addtocounter{table}{-1} \end_layout \begin_layout Plain Layout というコマンドを挿入する方法があります. \end_layout \begin_layout Plain Layout 全多頁表にキャプションがなかったり,文書プリアンブルに以下のコードを書き加えていれば,以上のことは必要ありません. \end_layout \begin_layout Plain Layout \series bold \backslash let \backslash myEnd \backslash endlongtable \begin_inset Newline newline \end_inset \backslash renewcommand{ \backslash endlongtable}{ \backslash myEnd \backslash addtocounter{table}{-1}} \end_layout \end_inset \end_layout \begin_layout Standard \begin_inset Note Greyedout status open \begin_layout Plain Layout \series bold 【註2】 \series default 相互参照をリンクするために, \family sans 文書設定 \family default ダイアログの \family sans PDF特性 \family default で \series bold hyperref \series default \begin_inset Index idx status collapsed \begin_layout Plain Layout \SpecialChar LaTeX ぱっけーじ@\SpecialChar LaTeX パッケージ ! hyperref \end_layout \end_inset を使用している場合,多頁表キャプションへのリンクは,つねに文頭に向けられます. \end_layout \end_inset \end_layout \begin_layout Subsubsection 多頁表への参照 \begin_inset Index idx status collapsed \begin_layout Plain Layout たへえしひよう@多頁表 ! さんしよう@参照 \end_layout \end_inset \end_layout \begin_layout Standard \begin_inset Tabular <lyxtabular version="3" rows="6" columns="5"> <features islongtable="true" longtabularalignment="center"> <column alignment="center" valignment="top"> <column alignment="center" valignment="top"> <column alignment="center" valignment="top"> <column alignment="center" valignment="top"> <column alignment="center" valignment="top"> <row endfirsthead="true" caption="true"> <cell multicolumn="1" alignment="center" valignment="top" usebox="none"> \begin_inset Text \begin_layout Plain Layout \begin_inset Caption Standard \begin_layout Plain Layout 参照された多頁表 \begin_inset CommandInset label LatexCommand label name "tab:参照例" \end_inset \end_layout \end_inset \end_layout \end_inset </cell> <cell multicolumn="2" alignment="center" valignment="top" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \end_layout \end_inset </cell> <cell multicolumn="2" alignment="center" valignment="top" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \end_layout \end_inset </cell> <cell multicolumn="2" alignment="center" valignment="top" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \end_layout \end_inset </cell> <cell multicolumn="2" alignment="center" valignment="top" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \end_layout \end_inset </cell> </row> <row> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 1 \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 2 \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 3 \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 4 \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 5 \end_layout \end_inset </cell> </row> <row> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout いろは \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout ろ \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout ろ \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout ろ \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout いろは \end_layout \end_inset </cell> </row> <row> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout いろは \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout ろ \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout ろ \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout ろ \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout いろは \end_layout \end_inset </cell> </row> <row> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout いろは \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout ろ \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout ろ \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout ろ \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout いろは \end_layout \end_inset </cell> </row> <row> <cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout いろは \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout いろは \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout いろは \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout いろは \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout いろは \end_layout \end_inset </cell> </row> </lyxtabular> \end_inset \end_layout \begin_layout Standard 多頁表を参照するには,キャプションにラベルを挿入してください. \end_layout \begin_layout Standard これは表 \begin_inset CommandInset ref LatexCommand ref reference "tab:参照例" \end_inset への参照です. \end_layout \begin_layout Standard キャプションのレイアウトは,文書中の他のすべてのキャプションと一緒に,\SpecialChar LaTeX パッケージの \series bold caption \series default \begin_inset Index idx status collapsed \begin_layout Plain Layout \SpecialChar LaTeX ぱっけーじ@\SpecialChar LaTeX パッケージ ! caption \end_layout \end_inset を使用して設定することができます.第 \begin_inset CommandInset ref LatexCommand ref reference "sec:キャプションの書式設定" \end_inset 節をご覧下さい. \end_layout \begin_layout Subsubsection キャプションの幅 \begin_inset Index idx status collapsed \begin_layout Plain Layout たへえしひよう@多頁表 ! きやふしよんのはは@キャプションの幅 \end_layout \end_inset \end_layout \begin_layout Standard キャプション行の最大長は,長さ \series bold \backslash LTcapwidth \series default によって指定することができます.既定値は4 \begin_inset space \thinspace{} \end_inset inです.これを変更するには,現文書の文書プリアンブルか,調整したい多頁表の前の文中に\SpecialChar TeX コードとして \end_layout \begin_layout Standard \series bold \backslash setlength{ \backslash LTcapwidth}{幅} \end_layout \begin_layout Standard というコマンドを書き加えて下さい.ここで「幅」には,付録 \begin_inset CommandInset ref LatexCommand ref reference "cha:LyXで使用できる単位" \end_inset に挙げられている単位を取ることができます. \end_layout \begin_layout Standard 以下の各表で違いを示します. \end_layout \begin_layout Standard \begin_inset Tabular <lyxtabular version="3" rows="6" columns="5"> <features islongtable="true" longtabularalignment="center"> <column alignment="center" valignment="top"> <column alignment="center" valignment="top"> <column alignment="center" valignment="top"> <column alignment="center" valignment="top"> <column alignment="center" valignment="top"> <row endfirsthead="true" caption="true"> <cell multicolumn="1" alignment="center" valignment="top" usebox="none"> \begin_inset Text \begin_layout Plain Layout \begin_inset Caption Standard \begin_layout Plain Layout 既定幅のなが〜いフルタイトル・既定幅のなが〜いフルタイトル・既定幅のなが〜いフルタイトル \begin_inset Argument 1 status collapsed \begin_layout Plain Layout 既定幅のキャプション \end_layout \end_inset \end_layout \end_inset \end_layout \end_inset </cell> <cell multicolumn="2" alignment="center" valignment="top" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \end_layout \end_inset </cell> <cell multicolumn="2" alignment="center" valignment="top" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \end_layout \end_inset </cell> <cell multicolumn="2" alignment="center" valignment="top" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \end_layout \end_inset </cell> <cell multicolumn="2" alignment="center" valignment="top" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \end_layout \end_inset </cell> </row> <row> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 1 \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 2 \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 3 \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 4 \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 5 \end_layout \end_inset </cell> </row> <row> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout いろは \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout ろ \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout ろ \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout ろ \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout いろは \end_layout \end_inset </cell> </row> <row> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout いろは \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout ろ \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout ろ \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout ろ \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout いろは \end_layout \end_inset </cell> </row> <row> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout いろは \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout ろ \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout ろ \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout ろ \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout いろは \end_layout \end_inset </cell> </row> <row> <cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout いろは \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout いろは \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout いろは \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout いろは \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout いろは \end_layout \end_inset </cell> </row> </lyxtabular> \end_inset \end_layout \begin_layout Standard \begin_inset ERT status collapsed \begin_layout Plain Layout \backslash setlength{ \backslash LTcapwidth}{5cm} \end_layout \end_inset \begin_inset Tabular <lyxtabular version="3" rows="6" columns="5"> <features islongtable="true" longtabularalignment="center"> <column alignment="center" valignment="top"> <column alignment="center" valignment="top"> <column alignment="center" valignment="top"> <column alignment="center" valignment="top"> <column alignment="center" valignment="top"> <row endfirsthead="true" caption="true"> <cell multicolumn="1" alignment="center" valignment="top" usebox="none"> \begin_inset Text \begin_layout Plain Layout \begin_inset Caption Standard \begin_layout Plain Layout 5 \begin_inset space \thinspace{} \end_inset cm幅のなが〜いフルタイトル・5 \begin_inset space \thinspace{} \end_inset cm幅のなが〜いフルタイトル・5 \begin_inset space \thinspace{} \end_inset cm幅のなが〜いフルタイトル \begin_inset Argument 1 status collapsed \begin_layout Plain Layout 5 \begin_inset space \thinspace{} \end_inset cm幅のキャプション \end_layout \end_inset \end_layout \end_inset \end_layout \end_inset </cell> <cell multicolumn="2" alignment="center" valignment="top" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \end_layout \end_inset </cell> <cell multicolumn="2" alignment="center" valignment="top" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \end_layout \end_inset </cell> <cell multicolumn="2" alignment="center" valignment="top" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \end_layout \end_inset </cell> <cell multicolumn="2" alignment="center" valignment="top" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \end_layout \end_inset </cell> </row> <row> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 1 \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 2 \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 3 \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 4 \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 5 \end_layout \end_inset </cell> </row> <row> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout いろは \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout ろ \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout ろ \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout ろ \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout いろは \end_layout \end_inset </cell> </row> <row> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout いろは \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout ろ \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout ろ \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout ろ \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout いろは \end_layout \end_inset </cell> </row> <row> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout いろは \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout ろ \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout ろ \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout ろ \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout いろは \end_layout \end_inset </cell> </row> <row> <cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout いろは \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout いろは \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout いろは \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout いろは \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout いろは \end_layout \end_inset </cell> </row> </lyxtabular> \end_inset \end_layout \begin_layout Standard \begin_inset ERT status collapsed \begin_layout Plain Layout \backslash setlength{ \backslash LTcapwidth}{4in} \end_layout \end_inset \end_layout \begin_layout Standard \begin_inset Note Greyedout status open \begin_layout Plain Layout \series bold 【註】 \series default この文書のように\SpecialChar LaTeX パッケージの \series bold caption \series default \begin_inset Index idx status collapsed \begin_layout Plain Layout \SpecialChar LaTeX ぱっけーじ@\SpecialChar LaTeX パッケージ ! caption \end_layout \end_inset を使用している時には, \series bold \backslash LTcapwidth \series default に既定値の4 \begin_inset space \thinspace{} \end_inset inを使用している場合,ページの全幅が用いられます.この場合,正確に4 \begin_inset space \thinspace{} \end_inset in幅のキャプションを作るには,3.99 \begin_inset space \thinspace{} \end_inset inのように4.0 \begin_inset space \thinspace{} \end_inset inと少し違う値を指定するか, \series bold caption \series default パッケージが提供している \series bold \backslash captionsetup{width=値} \series default という\SpecialChar LaTeX コマンドを用いる方法があります. \end_layout \end_inset \end_layout \begin_layout Subsubsection 表の各ページごとに異なるキャプション \begin_inset Index idx status collapsed \begin_layout Plain Layout たへえしひよう@多頁表 ! へえしことにことなるきやふしよん@ページごとに異なるキャプション \end_layout \end_inset \end_layout \begin_layout Standard 次頁以降の表キャプションを,1頁めとは異なるものにしたい場合には,キャプションを入れる空行をヘッダに指定して下さい.それから,キャプションを右クリックして,文脈 依存メニューから \family sans キャプション(無番多頁表) \family default を選択してください.表 \begin_inset CommandInset ref LatexCommand ref reference "tab:別キャプション" \end_inset は,異なるヘッダを持つ多頁表の一例です.2番目のキャプションには表番が現れないようにしてあります. \end_layout \begin_layout Standard \align center \begin_inset Tabular <lyxtabular version="3" rows="59" columns="3"> <features islongtable="true" lastFootEmpty="true" longtabularalignment="center"> <column alignment="left" valignment="top" width="0cm"> <column alignment="left" valignment="top" width="0pt"> <column alignment="center" valignment="top" width="0pt"> <row endfirsthead="true" caption="true"> <cell multicolumn="1" alignment="left" valignment="top" usebox="none"> \begin_inset Text \begin_layout Plain Layout \begin_inset Caption Standard \begin_layout Plain Layout 例示用電話帳 \begin_inset CommandInset label LatexCommand label name "tab:別キャプション" \end_inset \begin_inset Argument 1 status collapsed \begin_layout Plain Layout 例示用電話帳 \end_layout \end_inset \end_layout \end_inset \end_layout \end_inset </cell> <cell multicolumn="2" alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \end_layout \end_inset </cell> <cell multicolumn="2" alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \end_layout \end_inset </cell> </row> <row endfirsthead="true"> <cell multicolumn="1" alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \series bold 例示用電話帳(名前は無視の事) \end_layout \end_inset </cell> <cell multicolumn="2" alignment="center" valignment="top" usebox="none"> \begin_inset Text \begin_layout Plain Layout \end_layout \end_inset </cell> <cell multicolumn="2" alignment="center" valignment="top" usebox="none"> \begin_inset Text \begin_layout Plain Layout \end_layout \end_inset </cell> </row> <row endfirsthead="true"> <cell multicolumn="1" alignment="center" valignment="top" bottomline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \series bold 氏名 \end_layout \end_inset </cell> <cell multicolumn="2" alignment="center" valignment="top" topline="true" bottomline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \end_layout \end_inset </cell> <cell alignment="center" valignment="top" bottomline="true" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \series bold TEL. \end_layout \end_inset </cell> </row> <row endhead="true"> <cell alignment="left" valignment="top" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \begin_inset ERT status collapsed \begin_layout Plain Layout \backslash caption*{例示用電話帳の続き} \backslash \backslash % \end_layout \end_inset \end_layout \end_inset </cell> <cell alignment="center" valignment="top" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \end_layout \end_inset </cell> <cell alignment="center" valignment="top" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \end_layout \end_inset </cell> </row> <row endhead="true"> <cell multicolumn="1" alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \series bold 例示用電話帳 \end_layout \end_inset </cell> <cell multicolumn="2" alignment="center" valignment="top" topline="true" bottomline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \end_layout \end_inset </cell> <cell multicolumn="2" alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \end_layout \end_inset </cell> </row> <row endhead="true"> <cell multicolumn="1" alignment="center" valignment="top" bottomline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \series bold 氏名 \end_layout \end_inset </cell> <cell multicolumn="2" alignment="center" valignment="top" topline="true" bottomline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \end_layout \end_inset </cell> <cell alignment="center" valignment="top" bottomline="true" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \series bold TEL. \end_layout \end_inset </cell> </row> <row endfoot="true"> <cell multicolumn="1" alignment="right" valignment="top" usebox="none"> \begin_inset Text \begin_layout Plain Layout 次頁に続く \end_layout \end_inset </cell> <cell multicolumn="2" alignment="center" valignment="top" topline="true" bottomline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \end_layout \end_inset </cell> <cell multicolumn="2" alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \end_layout \end_inset </cell> </row> <row> <cell alignment="center" valignment="top" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \series bold Annovi \end_layout \end_inset </cell> <cell alignment="center" valignment="top" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout Silvia \end_layout \end_inset </cell> <cell alignment="right" valignment="top" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 111 \end_layout \end_inset </cell> </row> <row> <cell alignment="center" valignment="top" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \series bold Bertoli \end_layout \end_inset </cell> <cell alignment="center" valignment="top" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout Stefano \end_layout \end_inset </cell> <cell alignment="center" valignment="top" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 111 \end_layout \end_inset </cell> </row> <row> <cell alignment="center" valignment="top" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \series bold Bozzi \end_layout \end_inset </cell> <cell alignment="center" valignment="top" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout Walter \end_layout \end_inset </cell> <cell alignment="center" valignment="top" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 111 \end_layout \end_inset </cell> </row> <row> <cell alignment="center" valignment="top" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \series bold Cachia \end_layout \end_inset </cell> <cell alignment="center" valignment="top" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout Maria \end_layout \end_inset </cell> <cell alignment="center" valignment="top" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 111 \end_layout \end_inset </cell> </row> <row> <cell alignment="center" valignment="top" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \series bold Cachia \end_layout \end_inset </cell> <cell alignment="center" valignment="top" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout Maurizio \end_layout \end_inset </cell> <cell alignment="center" valignment="top" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 111 \end_layout \end_inset </cell> </row> <row> <cell alignment="center" valignment="top" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \series bold Cinquemani \end_layout \end_inset </cell> <cell alignment="center" valignment="top" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout Giusi \end_layout \end_inset </cell> <cell alignment="center" valignment="top" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 111 \end_layout \end_inset </cell> </row> <row> <cell alignment="center" valignment="top" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \series bold Colin \end_layout \end_inset </cell> <cell alignment="center" valignment="top" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout Bernard \end_layout \end_inset </cell> <cell alignment="center" valignment="top" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 111 \end_layout \end_inset </cell> </row> <row> <cell alignment="center" valignment="top" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \series bold Concli \end_layout \end_inset </cell> <cell alignment="center" valignment="top" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout Gianfranco \end_layout \end_inset </cell> <cell alignment="center" valignment="top" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 111 \end_layout \end_inset </cell> </row> <row> <cell alignment="center" valignment="top" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \series bold Dal Bosco \end_layout \end_inset </cell> <cell alignment="center" valignment="top" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout Carolina \end_layout \end_inset </cell> <cell alignment="center" valignment="top" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 111 \end_layout \end_inset </cell> </row> <row> <cell alignment="center" valignment="top" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \series bold Dalpiaz \end_layout \end_inset </cell> <cell alignment="center" valignment="top" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout Annamaria \end_layout \end_inset </cell> <cell alignment="center" valignment="top" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 111 \end_layout \end_inset </cell> </row> <row> <cell alignment="center" valignment="top" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \series bold Feliciello \end_layout \end_inset </cell> <cell alignment="center" valignment="top" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout Domenico \end_layout \end_inset </cell> <cell alignment="center" valignment="top" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 111 \end_layout \end_inset </cell> </row> <row> <cell alignment="center" valignment="top" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \series bold Focarelli \end_layout \end_inset </cell> <cell alignment="center" valignment="top" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout Paola \end_layout \end_inset </cell> <cell alignment="center" valignment="top" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 111 \end_layout \end_inset </cell> </row> <row> <cell alignment="center" valignment="top" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \series bold Galletti \end_layout \end_inset </cell> <cell alignment="center" valignment="top" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout Oreste \end_layout \end_inset </cell> <cell alignment="center" valignment="top" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 111 \end_layout \end_inset </cell> </row> <row> <cell alignment="center" valignment="top" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \series bold Gasparini \end_layout \end_inset </cell> <cell alignment="center" valignment="top" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout Franca \end_layout \end_inset </cell> <cell alignment="center" valignment="top" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 111 \end_layout \end_inset </cell> </row> <row> <cell alignment="center" valignment="top" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \series bold Rizzardi \series default \begin_inset Foot status collapsed \begin_layout Plain Layout 例示用脚註 \end_layout \end_inset \end_layout \end_inset </cell> <cell alignment="center" valignment="top" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout Paola \end_layout \end_inset </cell> <cell alignment="center" valignment="top" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 111 \end_layout \end_inset </cell> </row> <row> <cell alignment="center" valignment="top" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \series bold Lassini \end_layout \end_inset </cell> <cell alignment="center" valignment="top" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout Giancarlo \end_layout \end_inset </cell> <cell alignment="center" valignment="top" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 111 \end_layout \end_inset </cell> </row> <row> <cell alignment="center" valignment="top" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \series bold Malfatti \end_layout \end_inset </cell> <cell alignment="center" valignment="top" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout Luciano \end_layout \end_inset </cell> <cell alignment="center" valignment="top" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 111 \end_layout \end_inset </cell> </row> <row> <cell alignment="center" valignment="top" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \series bold Malfatti \end_layout \end_inset </cell> <cell alignment="center" valignment="top" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout Valeriano \end_layout \end_inset </cell> <cell alignment="center" valignment="top" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 111 \end_layout \end_inset </cell> </row> <row> <cell alignment="center" valignment="top" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \series bold Meneguzzo \end_layout \end_inset </cell> <cell alignment="center" valignment="top" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout Roberto \end_layout \end_inset </cell> <cell alignment="center" valignment="top" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 111 \end_layout \end_inset </cell> </row> <row> <cell alignment="center" valignment="top" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \series bold Mezzadra \end_layout \end_inset </cell> <cell alignment="center" valignment="top" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout Roberto \end_layout \end_inset </cell> <cell alignment="center" valignment="top" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 111 \end_layout \end_inset </cell> </row> <row> <cell alignment="center" valignment="top" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \series bold Pirpamer \end_layout \end_inset </cell> <cell alignment="center" valignment="top" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout Erich \end_layout \end_inset </cell> <cell alignment="center" valignment="top" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 111 \end_layout \end_inset </cell> </row> <row> <cell alignment="center" valignment="top" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \series bold Pochiesa \end_layout \end_inset </cell> <cell alignment="center" valignment="top" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout Paolo \end_layout \end_inset </cell> <cell alignment="center" valignment="top" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 111, 222 \end_layout \end_inset </cell> </row> <row> <cell alignment="center" valignment="top" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \series bold Radina \end_layout \end_inset </cell> <cell alignment="center" valignment="top" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout Claudio \end_layout \end_inset </cell> <cell alignment="center" valignment="top" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 111 \end_layout \end_inset </cell> </row> <row> <cell alignment="center" valignment="top" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \series bold Stuffer \end_layout \end_inset </cell> <cell alignment="center" valignment="top" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout Oskar \end_layout \end_inset </cell> <cell alignment="center" valignment="top" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 111 \end_layout \end_inset </cell> </row> <row> <cell alignment="center" valignment="top" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \series bold Tacchelli \end_layout \end_inset </cell> <cell alignment="center" valignment="top" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout Ugo \end_layout \end_inset </cell> <cell alignment="center" valignment="top" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 111 \end_layout \end_inset </cell> </row> <row> <cell alignment="center" valignment="top" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \series bold Tezzele \end_layout \end_inset </cell> <cell alignment="center" valignment="top" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout Margit \end_layout \end_inset </cell> <cell alignment="center" valignment="top" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 111 \end_layout \end_inset </cell> </row> <row> <cell alignment="center" valignment="top" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \series bold Unterkalmsteiner \end_layout \end_inset </cell> <cell alignment="center" valignment="top" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout Frieda \end_layout \end_inset </cell> <cell alignment="center" valignment="top" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 111 \end_layout \end_inset </cell> </row> <row> <cell alignment="center" valignment="top" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \series bold Vieider \end_layout \end_inset </cell> <cell alignment="center" valignment="top" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout Hilde \end_layout \end_inset </cell> <cell alignment="center" valignment="top" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 111 \end_layout \end_inset </cell> </row> <row> <cell alignment="center" valignment="top" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \series bold Vigna \end_layout \end_inset </cell> <cell alignment="center" valignment="top" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout Jürgen \end_layout \end_inset </cell> <cell alignment="center" valignment="top" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 111 \end_layout \end_inset </cell> </row> <row> <cell alignment="center" valignment="top" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \series bold Weber \end_layout \end_inset </cell> <cell alignment="center" valignment="top" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout Maurizio \end_layout \end_inset </cell> <cell alignment="center" valignment="top" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 111 \end_layout \end_inset </cell> </row> <row> <cell alignment="center" valignment="top" bottomline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \series bold Winkler \end_layout \end_inset </cell> <cell alignment="center" valignment="top" bottomline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout Franz \end_layout \end_inset </cell> <cell alignment="center" valignment="top" bottomline="true" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 111 \end_layout \end_inset </cell> </row> <row> <cell multicolumn="1" alignment="left" valignment="top" bottomline="true" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \end_layout \end_inset </cell> <cell multicolumn="2" alignment="center" valignment="top" topline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \end_layout \end_inset </cell> <cell multicolumn="2" alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \end_layout \end_inset </cell> </row> <row> <cell alignment="left" valignment="top" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \series bold Annovi \end_layout \end_inset </cell> <cell alignment="center" valignment="top" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout Silvia \end_layout \end_inset </cell> <cell alignment="center" valignment="top" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 555 \end_layout \end_inset </cell> </row> <row> <cell alignment="left" valignment="top" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \series bold Bertoli \end_layout \end_inset </cell> <cell alignment="center" valignment="top" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout Stefano \end_layout \end_inset </cell> <cell alignment="center" valignment="top" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 555 \end_layout \end_inset </cell> </row> <row> <cell alignment="left" valignment="top" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \series bold Bozzi \end_layout \end_inset </cell> <cell alignment="center" valignment="top" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout Walter \end_layout \end_inset </cell> <cell alignment="center" valignment="top" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 555 \end_layout \end_inset </cell> </row> <row> <cell alignment="left" valignment="top" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \series bold Cachia \end_layout \end_inset </cell> <cell alignment="center" valignment="top" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout Maria \end_layout \end_inset </cell> <cell alignment="center" valignment="top" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 555 \end_layout \end_inset </cell> </row> <row> <cell alignment="left" valignment="top" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \series bold Cachia \end_layout \end_inset </cell> <cell alignment="center" valignment="top" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout Maurizio \end_layout \end_inset </cell> <cell alignment="center" valignment="top" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 555 \end_layout \end_inset </cell> </row> <row> <cell alignment="left" valignment="top" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \series bold Cinquemani \end_layout \end_inset </cell> <cell alignment="center" valignment="top" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout Giusi \end_layout \end_inset </cell> <cell alignment="center" valignment="top" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 555 \end_layout \end_inset </cell> </row> <row> <cell alignment="left" valignment="top" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \series bold Colin \end_layout \end_inset </cell> <cell alignment="center" valignment="top" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout Bernard \end_layout \end_inset </cell> <cell alignment="center" valignment="top" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 555 \end_layout \end_inset </cell> </row> <row> <cell alignment="left" valignment="top" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \series bold Concli \end_layout \end_inset </cell> <cell alignment="center" valignment="top" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout Gianfranco \end_layout \end_inset </cell> <cell alignment="center" valignment="top" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 555 \end_layout \end_inset </cell> </row> <row> <cell alignment="left" valignment="top" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \series bold Dal Bosco \end_layout \end_inset </cell> <cell alignment="center" valignment="top" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout Carolina \end_layout \end_inset </cell> <cell alignment="center" valignment="top" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 555 \end_layout \end_inset </cell> </row> <row> <cell alignment="left" valignment="top" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \series bold Dalpiaz \end_layout \end_inset </cell> <cell alignment="center" valignment="top" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout Annamaria \end_layout \end_inset </cell> <cell alignment="center" valignment="top" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 555 \end_layout \end_inset </cell> </row> <row> <cell alignment="left" valignment="top" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \series bold Feliciello \end_layout \end_inset </cell> <cell alignment="center" valignment="top" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout Domenico \end_layout \end_inset </cell> <cell alignment="center" valignment="top" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 555 \end_layout \end_inset </cell> </row> <row> <cell alignment="left" valignment="top" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \series bold Focarelli \end_layout \end_inset </cell> <cell alignment="center" valignment="top" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout Paola \end_layout \end_inset </cell> <cell alignment="center" valignment="top" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 555 \end_layout \end_inset </cell> </row> <row> <cell alignment="left" valignment="top" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \series bold Galletti \end_layout \end_inset </cell> <cell alignment="center" valignment="top" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout Oreste \end_layout \end_inset </cell> <cell alignment="center" valignment="top" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 555 \end_layout \end_inset </cell> </row> <row> <cell alignment="left" valignment="top" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \series bold Gasparini \end_layout \end_inset </cell> <cell alignment="center" valignment="top" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout Franca \end_layout \end_inset </cell> <cell alignment="center" valignment="top" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 555 \end_layout \end_inset </cell> </row> <row> <cell alignment="left" valignment="top" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \series bold Rizzardi \end_layout \end_inset </cell> <cell alignment="center" valignment="top" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout Paola \end_layout \end_inset </cell> <cell alignment="center" valignment="top" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 555 \end_layout \end_inset </cell> </row> <row> <cell alignment="left" valignment="top" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \series bold Lassini \end_layout \end_inset </cell> <cell alignment="center" valignment="top" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout Giancarlo \end_layout \end_inset </cell> <cell alignment="center" valignment="top" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 555 \end_layout \end_inset </cell> </row> <row> <cell alignment="left" valignment="top" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \series bold Malfatti \end_layout \end_inset </cell> <cell alignment="center" valignment="top" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout Luciano \end_layout \end_inset </cell> <cell alignment="center" valignment="top" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 555 \end_layout \end_inset </cell> </row> <row> <cell alignment="left" valignment="top" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \series bold Malfatti \end_layout \end_inset </cell> <cell alignment="center" valignment="top" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout Valeriano \end_layout \end_inset </cell> <cell alignment="center" valignment="top" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 555 \end_layout \end_inset </cell> </row> <row> <cell alignment="left" valignment="top" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \series bold Meneguzzo \end_layout \end_inset </cell> <cell alignment="center" valignment="top" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout Roberto \end_layout \end_inset </cell> <cell alignment="center" valignment="top" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 555 \end_layout \end_inset </cell> </row> <row> <cell alignment="left" valignment="top" bottomline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \series bold Mezzadra \end_layout \end_inset </cell> <cell alignment="center" valignment="top" bottomline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout Roberto \end_layout \end_inset </cell> <cell alignment="center" valignment="top" bottomline="true" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 555 \end_layout \end_inset </cell> </row> </lyxtabular> \end_inset \end_layout \begin_layout Section 多頁表にまつわる諸点 \begin_inset CommandInset label LatexCommand label name "sec:多頁表にまつわる諸点" \end_inset \end_layout \begin_layout Subsection 多頁表の計算 \begin_inset Index idx status collapsed \begin_layout Plain Layout たへえしひよう@多頁表 ! けいさん@計算 \end_layout \end_inset \end_layout \begin_layout Standard \SpecialChar LaTeX は,表ページの頁高と改頁をいわゆる単位塊(チャンクchunk)を使って計算します.単位塊は,一度に\SpecialChar LaTeX のメモリに読み込まれる表の断片です.歴史上の経緯から,既定値は たった表20行分に設定されています.多頁にわたる多頁表がある場合,この設定では文書の生成に時間がかかるかもしれません.この場合, \end_layout \begin_layout Standard \series bold \backslash setcounter{LTchunksize}{100} \end_layout \begin_layout Standard というコマンド行を文書のプリアンブルに書き加えることで,単位塊の大きさを100から1000の値に支障なく増やすことができます. \end_layout \begin_layout Subsection フロートと多頁表 \begin_inset Index idx status collapsed \begin_layout Plain Layout たへえしひよう@多頁表 ! ふろおと@フロート \end_layout \end_inset \end_layout \begin_layout Standard 多頁表が開始するのと同じページにフロートが置かれると問題が発生する可能性があります.このような状況を避けるためには, \series bold \backslash clearpage \series default コマンドを多頁表の前に\SpecialChar TeX コードとして書き加えてください. \end_layout \begin_layout Subsection 強制改頁 \begin_inset Index idx status collapsed \begin_layout Plain Layout たへえしひよう@多頁表 ! きようせいかいへえし@強制改頁 \end_layout \end_inset \end_layout \begin_layout Standard 既定の設定では,表は行の間でのみ改頁されます.もし複数行を含むセルがあり,そのセル中で改頁を行いたい時には,セル中の改頁してもよい場所に\SpecialChar TeX コードで改行コマンド「 \series bold \backslash \backslash \series default 」を挿入します. \series bold \backslash \backslash \series default コマンドの前には,現セルよりも右にある列数と同じ数の「 \series bold & \series default 」文字を,\SpecialChar TeX コードで挿入してやる必要があります.この \series bold & \series default は,表セルの区切り文字です.各 \series bold & \series default の後に,右側の本来のセルに入るべき内容を\SpecialChar TeX コードで書き込み,右側のセルの内容は削除してください. \begin_inset Newline newline \end_inset \series bold \backslash \backslash \series default コマンドの後ろには,現在列の左側にある列数と同じ数の \series bold & \series default 文字を挿入してください.表 \begin_inset CommandInset ref LatexCommand ref reference "tab:強制改頁" \end_inset では,改頁さるべきセルは,全3列中2列めにあります.したがって, \end_layout \begin_layout Standard \series bold & 111 \backslash \backslash \backslash newpage \begin_inset Newline newline \end_inset & \end_layout \begin_layout Standard というコマンドが,セル中「 \emph on Castelchiodato, \emph default 」の後に\SpecialChar TeX コードとして挿入してあります. \end_layout \begin_layout Standard 同一行3列目の「111」は削除してあります. \series bold \backslash newpage \series default は,改行がこの場所でかならず起こるように指定したいときのみ必要です.これを書かなければ,改頁の候補として指定するに過ぎません.何らかの理由で多頁表のフッタ行に上 罫線を引いていないけれども,セルを改頁する場所で水平線を引きたい場合には,代わりに \end_layout \begin_layout Standard \series bold & 111 \backslash \backslash \begin_inset Newline newline \end_inset \backslash hline & \end_layout \begin_layout Standard というコマンドを使用して下さい. \end_layout \begin_layout Standard 改頁をしたいセルが最右列にある場合には, \end_layout \begin_layout Standard \series bold \backslash setlength{ \backslash parfillskip}{0pt} \end_layout \begin_layout Standard というコマンドを当該セルの初めに\SpecialChar TeX コードで挿入しなくてはなりません.こうすることで,新規頁部分に表示されるセル内の部分が,正しく全幅を使用するようにできます. \end_layout \begin_layout Standard \align center \begin_inset Tabular <lyxtabular version="3" rows="38" columns="3"> <features islongtable="true" longtabularalignment="center"> <column alignment="left" valignment="top" width="0pt"> <column alignment="left" valignment="top" width="3cm"> <column alignment="center" valignment="top" width="0pt"> <row endfirsthead="true" caption="true"> <cell multicolumn="1" alignment="left" valignment="top" usebox="none"> \begin_inset Text \begin_layout Plain Layout \begin_inset Caption Standard \begin_layout Plain Layout 表セル内で強制改頁をしている表 \begin_inset CommandInset label LatexCommand label name "tab:強制改頁" \end_inset \begin_inset Argument 1 status collapsed \begin_layout Plain Layout 表セル内で強制改頁をしている表 \end_layout \end_inset \end_layout \end_inset \end_layout \end_inset </cell> <cell multicolumn="2" alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \end_layout \end_inset </cell> <cell multicolumn="2" alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \end_layout \end_inset </cell> </row> <row endfirsthead="true"> <cell multicolumn="1" alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \series bold 例示用電話帳(氏名は無視の事) \end_layout \end_inset </cell> <cell multicolumn="2" alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \end_layout \end_inset </cell> <cell multicolumn="2" alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \end_layout \end_inset </cell> </row> <row endfirsthead="true"> <cell multicolumn="1" alignment="center" valignment="top" bottomline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \series bold 氏名 \end_layout \end_inset </cell> <cell multicolumn="2" alignment="center" valignment="top" topline="true" bottomline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \end_layout \end_inset </cell> <cell alignment="center" valignment="top" bottomline="true" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \series bold TEL. \end_layout \end_inset </cell> </row> <row endhead="true" caption="true"> <cell multicolumn="1" alignment="left" valignment="top" usebox="none"> \begin_inset Text \begin_layout Plain Layout \begin_inset Caption Unnumbered \begin_layout Plain Layout 例示用電話帳の続き \end_layout \end_inset \end_layout \end_inset </cell> <cell multicolumn="2" alignment="center" valignment="top" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \end_layout \end_inset </cell> <cell multicolumn="2" alignment="center" valignment="top" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \end_layout \end_inset </cell> </row> <row endhead="true"> <cell multicolumn="1" alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 例示用電話帳 \end_layout \end_inset </cell> <cell multicolumn="2" alignment="center" valignment="top" topline="true" bottomline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \end_layout \end_inset </cell> <cell multicolumn="2" alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \end_layout \end_inset </cell> </row> <row endhead="true"> <cell multicolumn="1" alignment="center" valignment="top" bottomline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \series bold 氏名 \end_layout \end_inset </cell> <cell multicolumn="2" alignment="center" valignment="top" topline="true" bottomline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \end_layout \end_inset </cell> <cell alignment="center" valignment="top" bottomline="true" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \series bold TEL. \end_layout \end_inset </cell> </row> <row endfoot="true"> <cell multicolumn="1" alignment="right" valignment="top" usebox="none"> \begin_inset Text \begin_layout Plain Layout 次頁に続く \end_layout \end_inset </cell> <cell multicolumn="2" alignment="center" valignment="top" topline="true" bottomline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \end_layout \end_inset </cell> <cell multicolumn="2" alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \end_layout \end_inset </cell> </row> <row> <cell alignment="left" valignment="top" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \series bold Annovi \end_layout \end_inset </cell> <cell alignment="center" valignment="top" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout Silvia \end_layout \end_inset </cell> <cell alignment="right" valignment="top" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 111 \end_layout \end_inset </cell> </row> <row> <cell alignment="left" valignment="top" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \series bold Bertoli \end_layout \end_inset </cell> <cell alignment="center" valignment="top" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout Stefano \end_layout \end_inset </cell> <cell alignment="center" valignment="top" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 111 \end_layout \end_inset </cell> </row> <row> <cell alignment="left" valignment="top" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \series bold Bozzi \end_layout \end_inset </cell> <cell alignment="center" valignment="top" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout Walter \end_layout \end_inset </cell> <cell alignment="center" valignment="top" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 111 \end_layout \end_inset </cell> </row> <row> <cell alignment="left" valignment="top" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \series bold Cachia \end_layout \end_inset </cell> <cell alignment="center" valignment="top" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout Maria \end_layout \end_inset </cell> <cell alignment="center" valignment="top" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 111 \end_layout \end_inset </cell> </row> <row> <cell alignment="left" valignment="top" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \series bold Cachia \end_layout \end_inset </cell> <cell alignment="center" valignment="top" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout Maurizio \end_layout \end_inset </cell> <cell alignment="center" valignment="top" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 111 \end_layout \end_inset </cell> </row> <row> <cell alignment="left" valignment="top" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \series bold Cinquemani \end_layout \end_inset </cell> <cell alignment="center" valignment="top" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout Giusi \end_layout \end_inset </cell> <cell alignment="center" valignment="top" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 111 \end_layout \end_inset </cell> </row> <row> <cell alignment="left" valignment="top" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \series bold Colin \end_layout \end_inset </cell> <cell alignment="center" valignment="top" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout Bernard \end_layout \end_inset </cell> <cell alignment="center" valignment="top" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 111 \end_layout \end_inset </cell> </row> <row> <cell alignment="left" valignment="top" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \series bold Concli \end_layout \end_inset </cell> <cell alignment="center" valignment="top" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout Gianfranco \end_layout \end_inset </cell> <cell alignment="center" valignment="top" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 111 \end_layout \end_inset </cell> </row> <row> <cell alignment="left" valignment="top" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \series bold Dal Bosco \end_layout \end_inset </cell> <cell alignment="center" valignment="top" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout Carolina \end_layout \end_inset </cell> <cell alignment="center" valignment="top" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 111 \end_layout \end_inset </cell> </row> <row> <cell alignment="left" valignment="top" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \series bold Dalpiaz \end_layout \end_inset </cell> <cell alignment="center" valignment="top" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout Annamaria \end_layout \end_inset </cell> <cell alignment="center" valignment="top" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 111 \end_layout \end_inset </cell> </row> <row> <cell alignment="left" valignment="top" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \series bold Feliciello \end_layout \end_inset </cell> <cell alignment="center" valignment="top" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout Domenico \end_layout \end_inset </cell> <cell alignment="center" valignment="top" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 111 \end_layout \end_inset </cell> </row> <row> <cell alignment="left" valignment="top" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \series bold Focarelli \end_layout \end_inset </cell> <cell alignment="center" valignment="top" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout Paola \end_layout \end_inset </cell> <cell alignment="center" valignment="top" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 111 \end_layout \end_inset </cell> </row> <row> <cell alignment="left" valignment="top" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \series bold Galletti \end_layout \end_inset </cell> <cell alignment="center" valignment="top" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout Oreste \end_layout \end_inset </cell> <cell alignment="center" valignment="top" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 111 \end_layout \end_inset </cell> </row> <row> <cell alignment="left" valignment="top" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \series bold Gasparini \end_layout \end_inset </cell> <cell alignment="center" valignment="top" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout Franca \end_layout \end_inset </cell> <cell alignment="center" valignment="top" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 111 \end_layout \end_inset </cell> </row> <row> <cell alignment="left" valignment="top" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \series bold Lassini \end_layout \end_inset </cell> <cell alignment="center" valignment="top" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout Giancarlo \end_layout \end_inset </cell> <cell alignment="center" valignment="top" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 111 \end_layout \end_inset </cell> </row> <row> <cell alignment="left" valignment="top" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \series bold Malfatti \end_layout \end_inset </cell> <cell alignment="center" valignment="top" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout Luciano \end_layout \end_inset </cell> <cell alignment="center" valignment="top" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 111 \end_layout \end_inset </cell> </row> <row> <cell alignment="left" valignment="top" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \series bold Malfatti \end_layout \end_inset </cell> <cell alignment="center" valignment="top" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout Valeriano \end_layout \end_inset </cell> <cell alignment="center" valignment="top" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 111 \end_layout \end_inset </cell> </row> <row> <cell alignment="left" valignment="top" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \series bold Meneguzzo \end_layout \end_inset </cell> <cell alignment="center" valignment="top" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout Roberto \end_layout \end_inset </cell> <cell alignment="center" valignment="top" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 111 \end_layout \end_inset </cell> </row> <row> <cell alignment="left" valignment="top" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \series bold Mezzadra \end_layout \end_inset </cell> <cell alignment="center" valignment="top" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout Roberto \end_layout \end_inset </cell> <cell alignment="center" valignment="top" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 111 \end_layout \end_inset </cell> </row> <row> <cell alignment="left" valignment="top" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \series bold Pirpamer \end_layout \end_inset </cell> <cell alignment="center" valignment="top" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout Erich \end_layout \end_inset </cell> <cell alignment="center" valignment="top" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 111 \end_layout \end_inset </cell> </row> <row> <cell alignment="left" valignment="top" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \series bold Pochiesa \end_layout \end_inset </cell> <cell alignment="center" valignment="top" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout Paolo \end_layout \end_inset </cell> <cell alignment="center" valignment="top" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 111, 222 \end_layout \end_inset </cell> </row> <row> <cell alignment="left" valignment="top" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \series bold Radina \end_layout \end_inset </cell> <cell alignment="center" valignment="top" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout Claudio \end_layout \end_inset </cell> <cell alignment="center" valignment="top" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 111 \end_layout \end_inset </cell> </row> <row> <cell alignment="left" valignment="top" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \series bold Rizzardi \end_layout \end_inset </cell> <cell alignment="center" valignment="top" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout Paolo, 11. Fürst von Montecompatri, 11. Fürst von Sulmona und Vivaro, 10. Fürst von Rossano, 5. Herzog von Canemorte, 11. Herzog von Palombara, 5. Herzog von Castelchiodato, \begin_inset ERT status collapsed \begin_layout Plain Layout & 111 \backslash \backslash \backslash newpage \end_layout \begin_layout Plain Layout & \end_layout \end_inset 11. Herzog von Poggionativo, 11. Markis von Mentana, Norma, Civitella, Pratica, Moricone und Percille, 11. Graf von Valinfreda, 11. Baron von Cropalati, 11. Herr von Scarpa, Edelmann von Rom, Patrizier von Venedig, Neapel und Genua \end_layout \end_inset </cell> <cell alignment="center" valignment="top" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \end_layout \end_inset </cell> </row> <row> <cell alignment="left" valignment="top" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \series bold Stuffer \end_layout \end_inset </cell> <cell alignment="center" valignment="top" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout Oskar \end_layout \end_inset </cell> <cell alignment="center" valignment="top" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 111 \end_layout \end_inset </cell> </row> <row> <cell alignment="left" valignment="top" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \series bold Tacchelli \end_layout \end_inset </cell> <cell alignment="center" valignment="top" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout Ugo \end_layout \end_inset </cell> <cell alignment="center" valignment="top" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 111 \end_layout \end_inset </cell> </row> <row> <cell alignment="left" valignment="top" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \series bold Tezzele \end_layout \end_inset </cell> <cell alignment="center" valignment="top" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout Margit \end_layout \end_inset </cell> <cell alignment="center" valignment="top" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 111 \end_layout \end_inset </cell> </row> <row> <cell alignment="left" valignment="top" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \series bold Unterkalmsteiner \end_layout \end_inset </cell> <cell alignment="center" valignment="top" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout Frieda \end_layout \end_inset </cell> <cell alignment="center" valignment="top" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 111 \end_layout \end_inset </cell> </row> <row> <cell alignment="left" valignment="top" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \series bold Vieider \end_layout \end_inset </cell> <cell alignment="center" valignment="top" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout Hilde \end_layout \end_inset </cell> <cell alignment="center" valignment="top" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 111 \end_layout \end_inset </cell> </row> <row> <cell alignment="left" valignment="top" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \series bold Vigna \end_layout \end_inset </cell> <cell alignment="center" valignment="top" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout Jürgen \end_layout \end_inset </cell> <cell alignment="center" valignment="top" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 111 \end_layout \end_inset </cell> </row> <row> <cell alignment="left" valignment="top" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \series bold Weber \end_layout \end_inset </cell> <cell alignment="center" valignment="top" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout Maurizio \end_layout \end_inset </cell> <cell alignment="center" valignment="top" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 111 \end_layout \end_inset </cell> </row> <row> <cell alignment="left" valignment="top" bottomline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \series bold Winkler \end_layout \end_inset </cell> <cell alignment="center" valignment="top" bottomline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout Franz \end_layout \end_inset </cell> <cell alignment="center" valignment="top" bottomline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 111 \end_layout \end_inset </cell> </row> </lyxtabular> \end_inset \end_layout \begin_layout Section 複数行・連結列・連結行 \end_layout \begin_layout Subsection 表セル内の複数行 \begin_inset CommandInset label LatexCommand label name "subsec:複数行" \end_inset \begin_inset Index idx status collapsed \begin_layout Plain Layout ひょうせるないのふくすうぎょう@表セル内の複数行 \end_layout \end_inset \begin_inset Index idx status collapsed \begin_layout Plain Layout ひょう@表 ! かいぎょう@改行 \end_layout \end_inset \end_layout \begin_layout Standard \noindent \begin_inset Float table placement H wide false sideways false status open \begin_layout Plain Layout \begin_inset Caption Standard \begin_layout Plain Layout \begin_inset CommandInset label LatexCommand label name "tab:複数行表" \end_inset セル内に複数の行がある表 \end_layout \end_inset \end_layout \begin_layout Plain Layout \align center \begin_inset Tabular <lyxtabular version="3" rows="3" columns="3"> <features tabularvalignment="middle"> <column alignment="center" valignment="middle" width="2.5cm"> <column alignment="center" valignment="middle"> <column alignment="center" valignment="middle"> <row> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 複数の \begin_inset Newline linebreak \end_inset 行 \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout ろ \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout は \end_layout \end_inset </cell> </row> <row> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout に \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout ほ \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout へ \end_layout \end_inset </cell> </row> <row> <cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout と \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout ち \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout り \end_layout \end_inset </cell> </row> </lyxtabular> \end_inset \end_layout \end_inset \end_layout \begin_layout Standard 列に固定幅を指定することによって,文章をハイフネーションを伴った複数行の段落として,入れることができるようになります. \end_layout \begin_layout Standard 表 \begin_inset CommandInset ref LatexCommand ref reference "tab:複数行表" \end_inset を生成するには,まず3 \begin_inset Formula $\times$ \end_inset 3表を作り,最初のセルを右クリックして現れるメニューから, \family sans 設定 \family default メニューを選択します.すると表ダイアログが現れるので,セル幅を2.5 \begin_inset space \thinspace{} \end_inset cm幅とし,水平揃え及び垂直揃えをともに中央揃えに設定します.垂直揃えは,その行のすべてのセルに適用されます.この例の文章は2.5 \begin_inset space \thinspace{} \end_inset cmよりも短いため,一行しか表示されません.そこで二行とも表示するために,両端揃え改行( \begin_inset Flex Ruby status collapsed \begin_layout Plain Layout 捷径 \begin_inset Argument post:1 status collapsed \begin_layout Plain Layout ショートカット \end_layout \end_inset \end_layout \end_inset \begin_inset Info type "shortcut" arg "newline-insert linebreak" \end_inset )を挿入してあります.もし文章が設定されたセル幅よりも広い場合には,文章は自動的にいくつかの行に改行されます. \end_layout \begin_layout Standard 固定幅のセルに長い単語を入れた場合,もしそれがセルの最初にあると,\SpecialChar LaTeX はハイフネーションを行うことができません.したがって,その単語がセルの最初に来ないようにするた めには,何かを入れなくてはなりません.そこで,その単語の前に0 \begin_inset space \thinspace{} \end_inset pt幅の水平空白を挿入します.空白がゼロ幅なので,出力は変わりません.表 \begin_inset CommandInset ref LatexCommand ref reference "tab:ハイフネーション表" \end_inset が違いを示しています \begin_inset Foot status open \begin_layout Plain Layout \series bold 【訳註】 \series default p\SpecialChar LaTeX を使用している場合,日本語の文章は正しく改行されます. \end_layout \end_inset . \end_layout \begin_layout Standard \begin_inset Float table placement h wide false sideways false status open \begin_layout Plain Layout \begin_inset Caption Standard \begin_layout Plain Layout \begin_inset CommandInset label LatexCommand label name "tab:ハイフネーション表" \end_inset ハイフネーション有/無の表 \end_layout \end_inset \end_layout \begin_layout Plain Layout \begin_inset space \hfill{} \end_inset \begin_inset Tabular <lyxtabular version="3" rows="3" columns="3"> <features tabularvalignment="middle"> <column alignment="center" valignment="middle" width="2.5cm"> <column alignment="center" valignment="middle"> <column alignment="center" valignment="middle"> <row> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout verylongtablecellword \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout ろ \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout は \end_layout \end_inset </cell> </row> <row> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout に \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout ほ \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout へ \end_layout \end_inset </cell> </row> <row> <cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout と \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout ち \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout り \end_layout \end_inset </cell> </row> </lyxtabular> \end_inset \begin_inset space \hfill{} \end_inset \begin_inset Tabular <lyxtabular version="3" rows="3" columns="3"> <features tabularvalignment="middle"> <column alignment="center" valignment="middle" width="2.5cm"> <column alignment="center" valignment="middle"> <column alignment="center" valignment="middle"> <row> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \begin_inset space \hspace{} \length 0pt \end_inset verylongtablecellword \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout ろ \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout は \end_layout \end_inset </cell> </row> <row> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout に \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout ほ \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout へ \end_layout \end_inset </cell> </row> <row> <cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout と \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout ち \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout り \end_layout \end_inset </cell> </row> </lyxtabular> \end_inset \begin_inset space \hfill{} \end_inset \end_layout \end_inset \end_layout \begin_layout Subsection 連結列 \begin_inset CommandInset label LatexCommand label name "subsec:連結列" \end_inset \begin_inset Index idx status collapsed \begin_layout Plain Layout れんけつれつ@連結列 \end_layout \end_inset \begin_inset Index idx status collapsed \begin_layout Plain Layout ひょう@表 ! れんけつれつ@連結列 \end_layout \end_inset \end_layout \begin_layout Subsubsection 連結列の基礎 \end_layout \begin_layout Standard 一つのセルが複数の列にまたがるようにするためには,行中から一つの連結セルにまとめるべき各セルを選択して,表ツールバーボタン \family sans \begin_inset Info type "icon" arg "tabular-feature multicolumn" \end_inset \family default を押すか, \family sans 編集\SpecialChar menuseparator 表\SpecialChar menuseparator 連結列 \family default メニューを使用するか,あるいは選択したセルを右クリックして現れるメニューから \family sans 連結列 \family default を有効にするかしてください. \end_layout \begin_layout Standard 連結列はセル設定が独立しています.つまり,セル罫線やセルの縦横揃え,幅設定等を変更した場合には,現在の連結列のみに適用されるのです.以下は,第一行に連結行があり ,最下行に上罫線のない連結行がある表の例です. \end_layout \begin_layout Standard \align center \begin_inset Tabular <lyxtabular version="3" rows="3" columns="4"> <features firstHeadTopDL="true" firstHeadBottomDL="true" tabularvalignment="middle"> <column alignment="center" valignment="top" width="0pt"> <column alignment="center" valignment="middle"> <column alignment="center" valignment="top" width="0in"> <column alignment="center" valignment="top" width="0pt"> <row> <cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout いろは \end_layout \end_inset </cell> <cell multicolumn="1" alignment="center" valignment="middle" topline="true" bottomline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout にほへとちり \end_layout \end_inset </cell> <cell multicolumn="2" alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout ぬるを \end_layout \end_inset </cell> </row> <row> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 甲 \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 乙 \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 丙 \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 丁 \end_layout \end_inset </cell> </row> <row> <cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 一 \end_layout \end_inset </cell> <cell multicolumn="1" alignment="center" valignment="top" bottomline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 二 \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 三 \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 四 \end_layout \end_inset </cell> </row> </lyxtabular> \end_inset \end_layout \begin_layout Subsubsection 連結列の計算 \begin_inset CommandInset label LatexCommand label name "subsec:連結列の計算" \end_inset \begin_inset Index idx status collapsed \begin_layout Plain Layout れんけつれつ@連結列 ! けいさん@計算 \end_layout \end_inset \end_layout \begin_layout Standard \SpecialChar LyX は,連結列を直接にサポートしていますが,同列にある連結セル以外のセル幅については,考慮が必要です. \end_layout \begin_layout Standard \begin_inset Float table placement h wide false sideways false status open \begin_layout Plain Layout \begin_inset Caption Standard \begin_layout Plain Layout \begin_inset CommandInset label LatexCommand label name "tab:中央揃え表" \end_inset 中央揃え連結列の下にちょうど半分の幅を持つ列が2つある表 \begin_inset Argument 1 status collapsed \begin_layout Plain Layout 完全なる連結列表 \end_layout \end_inset \end_layout \end_inset \end_layout \begin_layout Plain Layout \align center \begin_inset Tabular <lyxtabular version="3" rows="3" columns="3"> <features tabularvalignment="middle"> <column alignment="center" valignment="middle" width="1.25cm" special=">{\centering}m{1.25cm-6.2pt}"> <column alignment="center" valignment="middle"> <column alignment="center" valignment="top"> <row> <cell multicolumn="1" alignment="center" valignment="middle" topline="true" leftline="true" usebox="none" width="2.5cm" special=">{\centering}m{2.5cm}"> \begin_inset Text \begin_layout Plain Layout 複数行にわたる連結列 \end_layout \end_inset </cell> <cell multicolumn="2" alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout は \end_layout \end_inset </cell> </row> <row> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout に \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout ほ \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout へ \end_layout \end_inset </cell> </row> <row> <cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout と \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout ち \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout り \end_layout \end_inset </cell> </row> </lyxtabular> \end_inset \end_layout \end_inset \end_layout \begin_layout Standard たとえば,表 \begin_inset CommandInset ref LatexCommand ref reference "tab:中央揃え表" \end_inset を生成するには,3 \begin_inset Formula $\times$ \end_inset 3表の第一行の最初の二つのセルを選択して,右クリックして現れるメニューから \family sans 設定 \family default を選択します.そして現れる表の設定ダイアログで,このセルを \emph on 連結列 \emph default , \emph on 中央揃え \emph default ,2.5 \begin_inset space \thinspace{} \end_inset cm幅に設定します.被連結列のセルが連結列セルのちょうど半分の幅になるようにしたいので,第一列の幅を1.25 \begin_inset space \thinspace{} \end_inset cm幅に設定します.すると第二列は自動的に1.25 \begin_inset space \thinspace{} \end_inset cm幅(連結列幅マイナス第一列の幅)になります.表 \begin_inset CommandInset ref LatexCommand ref reference "tab:半分でない表" \end_inset もこのようにして作成してあります. \end_layout \begin_layout Standard \begin_inset Float table wide false sideways false status open \begin_layout Plain Layout \begin_inset Caption Standard \begin_layout Plain Layout \begin_inset CommandInset label LatexCommand label name "tab:半分でない表" \end_inset 連結セルの下の列が正確に半分になっていない表 \begin_inset Argument 1 status collapsed \begin_layout Plain Layout 不完全な連結列表 \end_layout \end_inset \end_layout \end_inset \end_layout \begin_layout Plain Layout \align center \begin_inset Tabular <lyxtabular version="3" rows="3" columns="3"> <features tabularvalignment="middle"> <column alignment="center" valignment="top" width="1.25cm"> <column alignment="center" valignment="top"> <column alignment="center" valignment="top"> <row> <cell multicolumn="1" alignment="center" valignment="top" topline="true" leftline="true" usebox="none" width="2.5cm"> \begin_inset Text \begin_layout Plain Layout 複数行にわたる連結列 \end_layout \end_inset </cell> <cell multicolumn="2" alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout は \end_layout \end_inset </cell> </row> <row> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout に \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout ほ \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout へ \end_layout \end_inset </cell> </row> <row> <cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout と \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout ち \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout り \end_layout \end_inset </cell> </row> </lyxtabular> \end_inset \end_layout \end_inset \end_layout \begin_layout Standard ご覧になって分かるように,第一列が,連結セルの幅の半分よりも少し大きくなっています.その原因は,セル幅が,指定された幅よりもつねに少しだけ大きく描かれるために, 指定したセル幅 \begin_inset Formula $W_{\text{指}}$ \end_inset がセルの全幅 \begin_inset Formula $W_{\text{全}}$ \end_inset と等しくならないためです.付録 \begin_inset CommandInset ref LatexCommand ref reference "cha:式の説明" \end_inset がこの事情を詳細に説明しています. \end_layout \begin_layout Standard \emph on n \emph default 列を連結する際,各列の全幅が \begin_inset Formula $W_{\text{全}:\text{連結}}/n$ \end_inset となるために必要な指定幅 \begin_inset Formula $W_{\text{指}:n}$ \end_inset は, \begin_inset Formula \begin{equation} W_{\text{指}:n}=(W_{\text{指}:\text{連結列}}+(1-n)\cdot(12.4\,\mathrm{pt}))/n\label{eq:Wgn} \end{equation} \end_inset \end_layout \begin_layout Standard で計算することができます.上記の例では \begin_inset Formula $n=2$ \end_inset かつ \begin_inset Formula $W_{\text{指}:\text{連結列}}=2.5\,$ \end_inset cmかつ長さは既定値ですから,第 \begin_inset CommandInset ref LatexCommand ref reference "eq:Wgn" \end_inset 式は \begin_inset Formula \begin{equation} W_{\text{指}:2}=1.25\,\mathrm{cm}-6.2\,\mathrm{pt} \end{equation} \end_inset \end_layout \begin_layout Standard となります.\SpecialChar LaTeX 中で計算を可能にするには,文書プリアンブル行に \end_layout \begin_layout Standard \series bold \backslash usepackage{calc} \end_layout \begin_layout Standard と書いて,\SpecialChar LaTeX パッケージ \series bold calc \series default \begin_inset Index idx status collapsed \begin_layout Plain Layout \SpecialChar LaTeX ぱっけーじ@\SpecialChar LaTeX パッケージ ! calc \end_layout \end_inset を読み込まなくてはなりません.\SpecialChar LyX の「表の設定」ダイアログの幅フィールドでは,長さを計算することができません.したがって,ダイアログの\SpecialChar LaTeX の引数欄に書き込むことによって 列を整形しなくてはなりません.以下は,その引数の概要です. \end_layout \begin_layout Itemize \series bold p{幅} \series default は固定幅セルを生成し,内容文は垂直方向上揃えになります. \end_layout \begin_layout Itemize \series bold m{幅} \series default は固定幅セルを生成し,内容文は垂直方向中央揃えになります. \end_layout \begin_layout Itemize \series bold b{幅} \series default は固定幅セルを生成し,内容文は垂直方向下揃えになります. \end_layout \begin_layout Standard \SpecialChar LaTeX 変数を入力すると,表ダイアログで設定されたすべてのセル設定は無効になります. \end_layout \begin_layout Standard \begin_inset Note Greyedout status open \begin_layout Plain Layout \series bold 【註】 \series default バグのせいで,\SpecialChar LyX は無効にされた設定も表示してしまいます. \end_layout \end_inset \end_layout \begin_layout Standard 文章を水平方向中央揃えにしたいので, \series bold \backslash centering \series default コマンドを入れます.したがって,以下のような\SpecialChar LaTeX 変数を,最初の被連結列に入れます. \end_layout \begin_layout Standard \series bold >{ \backslash centering}m{1.25cm-6.2pt} \end_layout \begin_layout Standard \series bold >{ } \series default コマンドは,セルが生成される前に中括弧内のコマンドを適用するという意味です. \end_layout \begin_layout Standard こうして被連結列セルの文章に,中央揃えを選択しましたが,連結セルの文章は依然として左揃えになっています.これは,\SpecialChar LyX は揃えを一列分のみに適用するためです.したがって ,連結セルには \end_layout \begin_layout Standard \series bold >{ \backslash centering}m{2.5cm} \end_layout \begin_layout Standard という\SpecialChar LaTeX 変数を指定しなくてはなりません. \end_layout \begin_layout Subsection 連結行 \begin_inset CommandInset label LatexCommand label name "subsec:連結行" \end_inset \begin_inset Index idx status collapsed \begin_layout Plain Layout れんけつぎょう@連結行 \end_layout \end_inset \begin_inset Index idx status collapsed \begin_layout Plain Layout ひょう@表 ! れんけつぎょう@連結行 \end_layout \end_inset \end_layout \begin_layout Standard 複数行にかかるセルを連結するには,同一列中の統合したいセルをすべて選択し,ツールバーボタン \family sans \begin_inset Info type "icon" arg "tabular-feature multirow" \end_inset \family default を押すか,メニュー \family sans 編集\SpecialChar menuseparator 表\SpecialChar menuseparator 連結行 \family default を選ぶか,選択したセルを右クリックして,コンテクストメニューから \family sans \SpecialChar menuseparator 連結行 \family default を選んでください. \end_layout \begin_layout Standard 下記は一列目に連結列を適用した表の例です. \end_layout \begin_layout Standard \align center \begin_inset Tabular <lyxtabular version="3" rows="3" columns="3"> <features tabularvalignment="middle"> <column alignment="center" valignment="top" width="0pt"> <column alignment="center" valignment="top"> <column alignment="center" valignment="top"> <row> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 長いセル項目 \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout ろ \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout は \end_layout \end_inset </cell> </row> <row> <cell multirow="3" alignment="left" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 連結列 \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout に \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout ほ \end_layout \end_inset </cell> </row> <row> <cell multirow="4" alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout と \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout ち \end_layout \end_inset </cell> </row> </lyxtabular> \end_inset \end_layout \begin_layout Standard 連結列の幅は,列全体の幅と揃えを設定することによって設定することができます. \family sans 垂直オフセット \family default は,正または負の値を与えると,連結列の内容を上下にシフトします. \end_layout \begin_layout Standard 連結行セルの列に明示的な幅が与えられていない場合,連結行セルは当該列の揃えを継承します.それもなければ左揃えです.既定値を上書きするには, \end_layout \begin_layout Standard \series bold \backslash renewcommand{ \backslash multirowsetup}{ \backslash centering} \end_layout \begin_layout Standard というコマンドを使用して,コマンド \series bold \backslash multirowsetup \series default を書き換えて下さい.すると,文書中の連結行の中身が,すべて中央揃えになります.もしいくつかの表だけ中央揃えにしたいのであれば,プリアンブルではなく表の直前にTe Xコードボックスを入れて,このコマンドを書き換えれば済みます.文章を右揃えにしたい場合には, \series bold \backslash centering \series default の代わりに \series bold \backslash raggedleft \series default を使用して下さい.左揃えに戻すには, \series bold \backslash raggedright \series default とします. \end_layout \begin_layout Standard 下記は,-4ミリの垂直オフセットを設定し,3センチ幅の列中にある右揃えの連結列セルがある表の例です. \end_layout \begin_layout Standard \noindent \align center \begin_inset ERT status collapsed \begin_layout Plain Layout \backslash renewcommand{ \backslash multirowsetup}{ \backslash raggedleft} \end_layout \end_inset \begin_inset Tabular <lyxtabular version="3" rows="4" columns="3"> <features tabularvalignment="middle"> <column alignment="center" valignment="top" width="3cm"> <column alignment="center" valignment="top"> <column alignment="center" valignment="top"> <row> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 長いセル項目 \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout ろ \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout は \end_layout \end_inset </cell> </row> <row> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout り \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout ぬ \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout る \end_layout \end_inset </cell> </row> <row> <cell multirow="3" mroffset="-4mm" alignment="left" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 連結列 \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout に \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout ほ \end_layout \end_inset </cell> </row> <row> <cell multirow="4" alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout と \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout ち \end_layout \end_inset </cell> </row> </lyxtabular> \end_inset \begin_inset ERT status collapsed \begin_layout Plain Layout \backslash renewcommand{ \backslash multirowsetup}{ \backslash raggedright} \end_layout \end_inset \end_layout \begin_layout Standard 連結行で新しい行に移るには,強制改行( \begin_inset Flex Ruby status collapsed \begin_layout Plain Layout 捷径 \begin_inset Argument post:1 status collapsed \begin_layout Plain Layout ショートカット \end_layout \end_inset \end_layout \end_inset \begin_inset Info type "shortcut" arg "newline-insert newline" \end_inset )を使用できますが,この場合,下記の例に示されているようにセル行との整合を顧慮しません. \end_layout \begin_layout Standard \noindent \align center \begin_inset Tabular <lyxtabular version="3" rows="3" columns="2"> <features tabularvalignment="middle"> <column alignment="left" valignment="middle" width="2cm"> <column alignment="center" valignment="top"> <row> <cell multirow="3" alignment="left" valignment="middle" topline="true" bottomline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout いいい \begin_inset Newline newline \end_inset いいい \begin_inset Newline newline \end_inset おかしなセル \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout ははは \end_layout \end_inset </cell> </row> <row> <cell multirow="4" alignment="left" valignment="middle" topline="true" bottomline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout ににに \end_layout \end_inset </cell> </row> <row> <cell alignment="left" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout ろろろ \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout ほほほ \end_layout \end_inset </cell> </row> </lyxtabular> \end_inset \end_layout \begin_layout Standard したがって,強制改行を使うのは注意が必要です. \end_layout \begin_layout Subsection 対角線付きのセル \end_layout \begin_layout Standard 読者に表中の行見出しや列見出しが何を意味しているかを伝えるには,表の第1セルに対角線を一本ないし二本引いて分割すると便利です.これは,\SpecialChar LaTeX パッケージの \series bold diagbox \series default \begin_inset Index idx status collapsed \begin_layout Plain Layout \SpecialChar LaTeX ぱっけーじ@\SpecialChar LaTeX パッケージ ! diagbox \end_layout \end_inset を文書プリアンブルに読み込むことによって実現できます.このパッケージには, \series bold \backslash diagbox \series default というコマンドがありますので,以下のように,これに2ないし3の引数をつけて,\SpecialChar TeX コードで挿入します. \end_layout \begin_layout Standard \series bold \backslash diagbox[オプション]{左下}{右上} \end_layout \begin_layout Standard \series bold \backslash diagbox[オプション]{左下}{左上}{右上} \end_layout \begin_layout Standard 最初の書式は,第1セルを一本の対角線で分割し,引数の内容がその上下に入れられます.二つ目の書式は,第1セルを二本の線で分割します. \end_layout \begin_layout Standard \begin_inset ERT status collapsed \begin_layout Plain Layout \backslash ifdiagbox \end_layout \end_inset \begin_inset Note Note status open \begin_layout Plain Layout この節は,\SpecialChar LaTeX パッケージ \series bold diagbox \series default が導入済みの時のみ表示されます. \end_layout \end_inset \end_layout \begin_layout Standard 下記は, \series bold \backslash diagbox \series default を第1セル中に2引数書式で使用した表の例です. \begin_inset VSpace medskip \end_inset \end_layout \begin_layout Standard \noindent \begin_inset Tabular <lyxtabular version="3" rows="4" columns="4"> <features tabularvalignment="middle"> <column alignment="center" valignment="top"> <column alignment="center" valignment="top"> <column alignment="center" valignment="top"> <column alignment="center" valignment="top"> <row> <cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \begin_inset ERT status collapsed \begin_layout Plain Layout \backslash diagbox{ \end_layout \end_inset 名称 \begin_inset ERT status collapsed \begin_layout Plain Layout }{ \end_layout \end_inset パラメータ \begin_inset ERT status collapsed \begin_layout Plain Layout } \end_layout \end_inset \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 厚み(nm) \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 透明度(%) \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 硬度(MPa) \end_layout \end_inset </cell> </row> <row> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout Perfect Green \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 45 \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 80 \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 504 \end_layout \end_inset </cell> </row> <row> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout Dark Multi-P \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 60 \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 72 \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 982 \end_layout \end_inset </cell> </row> <row> <cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout Crystal Clear Pro \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 18 \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 86 \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 374 \end_layout \end_inset </cell> </row> </lyxtabular> \end_inset \begin_inset VSpace medskip \end_inset \end_layout \begin_layout Standard 3引数書式は,例えばスポーツリーグや距離を示すクロス表に便利です. \end_layout \begin_layout Standard \noindent \align center \begin_inset Tabular <lyxtabular version="3" rows="4" columns="4"> <features tabularvalignment="middle"> <column alignment="center" valignment="top" width="0pt"> <column alignment="center" valignment="top"> <column alignment="center" valignment="top"> <column alignment="center" valignment="top"> <row> <cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \begin_inset ERT status collapsed \begin_layout Plain Layout \backslash diagbox{ \end_layout \end_inset ホームチーム \begin_inset ERT status collapsed \begin_layout Plain Layout }{ \end_layout \end_inset 結果 \begin_inset ERT status collapsed \begin_layout Plain Layout }{ \end_layout \end_inset アウェイチーム \begin_inset ERT status collapsed \begin_layout Plain Layout } \end_layout \end_inset \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout Tigers \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout Panthers \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout Falcons \end_layout \end_inset </cell> </row> <row> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout Tigers \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout — \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 1:3 \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 0:1 \end_layout \end_inset </cell> </row> <row> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout Panthers \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 3:1 \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout — \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 0:0 \end_layout \end_inset </cell> </row> <row> <cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout Falcons \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 1:0 \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 0:0 \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout — \end_layout \end_inset </cell> </row> </lyxtabular> \end_inset \end_layout \begin_layout Standard 大きなクロス表では,下記のように,2つないし全部のコーナーセルに対角線を入れると良いかもしれません. \end_layout \begin_layout Standard \noindent \align center \begin_inset Tabular <lyxtabular version="3" rows="5" columns="5"> <features tabularvalignment="middle"> <column alignment="center" valignment="top" width="0pt"> <column alignment="center" valignment="top"> <column alignment="center" valignment="top"> <column alignment="center" valignment="top"> <column alignment="center" valignment="top"> <row> <cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \begin_inset ERT status open \begin_layout Plain Layout \backslash diagbox{ \end_layout \end_inset ホームチーム \begin_inset ERT status collapsed \begin_layout Plain Layout }{ \end_layout \end_inset 結果 \begin_inset ERT status collapsed \begin_layout Plain Layout }{ \end_layout \end_inset アウェイチーム \begin_inset ERT status collapsed \begin_layout Plain Layout } \end_layout \end_inset \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout Tigers \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout Panthers \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout Falcons \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" bottomline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \begin_inset ERT status open \begin_layout Plain Layout \backslash diagbox[dir=NE]{ \end_layout \end_inset ホームチーム \begin_inset ERT status collapsed \begin_layout Plain Layout }{ \end_layout \end_inset 結果 \begin_inset ERT status collapsed \begin_layout Plain Layout }{ \end_layout \end_inset アウェイチーム \begin_inset ERT status collapsed \begin_layout Plain Layout } \end_layout \end_inset \end_layout \end_inset </cell> </row> <row> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout Tigers \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout — \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 1:3 \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 0:1 \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout Tigers \end_layout \end_inset </cell> </row> <row> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout Panthers \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 3:1 \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout — \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 0:0 \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout Panthers \end_layout \end_inset </cell> </row> <row> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout Falcons \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 1:0 \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 0:0 \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout — \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout Falcons \end_layout \end_inset </cell> </row> <row> <cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \begin_inset ERT status open \begin_layout Plain Layout \backslash diagbox[dir=SW]{ \end_layout \end_inset ホームチーム \begin_inset ERT status collapsed \begin_layout Plain Layout }{ \end_layout \end_inset 結果 \begin_inset ERT status collapsed \begin_layout Plain Layout }{ \end_layout \end_inset アウェイチーム \begin_inset ERT status collapsed \begin_layout Plain Layout } \end_layout \end_inset \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout Tigers \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout Panthers \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout Falcons \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" bottomline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \begin_inset ERT status open \begin_layout Plain Layout \backslash diagbox[dir=SE]{ \end_layout \end_inset ホームチーム \begin_inset ERT status collapsed \begin_layout Plain Layout }{ \end_layout \end_inset 結果 \begin_inset ERT status collapsed \begin_layout Plain Layout }{ \end_layout \end_inset アウェイチーム \begin_inset ERT status collapsed \begin_layout Plain Layout } \end_layout \end_inset \end_layout \end_inset </cell> </row> </lyxtabular> \end_inset \end_layout \begin_layout Standard 対角線を廻すために,コマンドオプションとして \series bold dir=方角 \series default を使用しています. \emph on 方角 \emph default は, \series bold NE \series default ・ \series bold SE \series default ・ \series bold SW \series default ・ \series bold NW \series default のいずれかで,コンパスでの位置を示します.例えば, \series bold SW \series default は南西かど(south-west)を示します.したがって,上の表の左下のセルでは, \end_layout \begin_layout Standard \series bold \backslash diagbox[dir=SW]{ホームチーム}{結果}{アウェイチーム} \end_layout \begin_layout Standard というコマンドを使用しています.方角を指定しなければ,NWを指定したのと同じ事になります. \end_layout \begin_layout Standard 対角線を引いたセルに必要な幅は,自動的に計算されます.したがって,計算された幅よりも小さい固定列幅を指定してしまうと,下記の例のように,セルの中身がはみ出てしま います. \end_layout \begin_layout Standard \noindent \align center \begin_inset Tabular <lyxtabular version="3" rows="2" columns="2"> <features tabularvalignment="middle"> <column alignment="center" valignment="top" width="3cm"> <column alignment="center" valignment="top"> <row> <cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \begin_inset ERT status collapsed \begin_layout Plain Layout \backslash diagbox{ \end_layout \end_inset 名称 \begin_inset ERT status collapsed \begin_layout Plain Layout }{ \end_layout \end_inset パラメータ \begin_inset ERT status collapsed \begin_layout Plain Layout } \end_layout \end_inset \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 厚み(nm) \end_layout \end_inset </cell> </row> <row> <cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout Perfect Green \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 45 \end_layout \end_inset </cell> </row> </lyxtabular> \end_inset \end_layout \begin_layout Standard 対角線を引いたセルの列に一定の幅が必要な場合は,コマンドオプションとして \series bold width=3cm \series default (必要に応じて「3cm」を必要な幅に変更)を与えてください.下記の表では,第1列の幅が4 \begin_inset space \thinspace{} \end_inset cmに設定してあります. \series bold \backslash diagbox \series default 全体の幅は,本文幅(この場合は4 \begin_inset space \thinspace{} \end_inset cm)に,本文とセル罫線との間隔の2倍を加えたものになるので, \series bold \backslash diagbox \series default には4 \begin_inset space \thinspace{} \end_inset cm + 2 \begin_inset space \thinspace{} \end_inset \backslash tabcolsepの幅が必要です.幅の計算は, \series bold \backslash diagbox \series default のコマンドオプション内では行うことができないので,前もって新しい長さを定義しておく必要があります.これは,\SpecialChar TeX コードコマンドで \end_layout \begin_layout Standard \series bold \backslash newlength{ \backslash diagtest} \begin_inset Newline newline \end_inset \backslash setlength{ \backslash diagtest}{4cm+2 \backslash tabcolsep} \end_layout \begin_layout Standard \begin_inset ERT status collapsed \begin_layout Plain Layout \backslash newlength{ \backslash diagtest} \end_layout \begin_layout Plain Layout \backslash setlength{ \backslash diagtest}{4cm+2 \backslash tabcolsep} \end_layout \end_inset \end_layout \begin_layout Standard とすれば実現できます.\SpecialChar LaTeX 内で計算を行うには,文書プリアンブル中で \series bold calc \series default \begin_inset Index idx status collapsed \begin_layout Plain Layout \SpecialChar LaTeX ぱっけーじ@\SpecialChar LaTeX パッケージ ! calc \end_layout \end_inset パッケージを読み込んでおく必要があります. \end_layout \begin_layout Standard さて,この表の第1セルで \end_layout \begin_layout Standard \series bold \backslash diagbox[width= \backslash diagtest]{A}{B} \end_layout \begin_layout Standard というコマンドを使用します. \end_layout \begin_layout Standard \noindent \align center \begin_inset Tabular <lyxtabular version="3" rows="2" columns="2"> <features tabularvalignment="middle"> <column alignment="center" valignment="top" width="4cm"> <column alignment="center" valignment="top"> <row> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \begin_inset ERT status open \begin_layout Plain Layout \backslash diagbox[width= \backslash diagtest]{ \end_layout \end_inset A \begin_inset ERT status collapsed \begin_layout Plain Layout }{ \end_layout \end_inset B \begin_inset ERT status collapsed \begin_layout Plain Layout } \end_layout \end_inset \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 厚み (nm) \end_layout \end_inset </cell> </row> <row> <cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout Perfect Green \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 45 \end_layout \end_inset </cell> </row> </lyxtabular> \end_inset \end_layout \begin_layout Standard 対角線の引いたセルは,当該列中で最も幅広くなっていなくてはなりません.さもないと,次の表のように,対角線の長さが正しく計算できなくなってしまいます. \end_layout \begin_layout Standard \noindent \align center \begin_inset Tabular <lyxtabular version="3" rows="2" columns="2"> <features tabularvalignment="middle"> <column alignment="center" valignment="top" width="0pt"> <column alignment="center" valignment="top"> <row> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \begin_inset ERT status collapsed \begin_layout Plain Layout \backslash diagbox{ \end_layout \end_inset A \begin_inset ERT status collapsed \begin_layout Plain Layout }{ \end_layout \end_inset B \begin_inset ERT status collapsed \begin_layout Plain Layout } \end_layout \end_inset \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 厚み (nm) \end_layout \end_inset </cell> </row> <row> <cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout Perfect Green \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 45 \end_layout \end_inset </cell> </row> </lyxtabular> \end_inset \end_layout \begin_layout Standard このような場合には, \series bold \backslash diagbox \series default コマンドの \series bold width \series default オプションを使用してください.こうすると,セル幅が列幅に等しくなるので,2 \backslash tabcolsepを足す必要はなくなります.下記の表では,3 \begin_inset space \thinspace{} \end_inset cm幅を使用しています. \end_layout \begin_layout Standard \noindent \align center \begin_inset Tabular <lyxtabular version="3" rows="2" columns="2"> <features tabularvalignment="middle"> <column alignment="center" valignment="top" width="0pt"> <column alignment="center" valignment="top"> <row> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \begin_inset ERT status open \begin_layout Plain Layout \backslash diagbox[width=3cm]{ \end_layout \end_inset A \begin_inset ERT status collapsed \begin_layout Plain Layout }{ \end_layout \end_inset B \begin_inset ERT status collapsed \begin_layout Plain Layout } \end_layout \end_inset \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 厚み (nm) \end_layout \end_inset </cell> </row> <row> <cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout Perfect Green \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 45 \end_layout \end_inset </cell> </row> </lyxtabular> \end_inset \end_layout \begin_layout Standard 対角線を引いたセルに複数行を入力するには,文章をセルに合わせるために高さを追加する必要があります.これは, \series bold \backslash diagbox \series default にオプション \series bold height=3cm \series default を与えることで実現できます(「3cm」は必要な高さに置き換えてください).下記の表では,第1セルに \end_layout \begin_layout Standard \series bold \backslash diagbox[width=3cm,height=1.4cm]{A \backslash \backslash B}{C \backslash \backslash D} \end_layout \begin_layout Standard というコマンドを使用しています.ここでコマンド \series bold \backslash \backslash \series default は改行をするためのものです \begin_inset Foot status collapsed \begin_layout Plain Layout \family sans Ctrl+Return \family default を使っての改行は,列が固定幅の時のみ,使用することができます. \end_layout \end_inset . \end_layout \begin_layout Standard \noindent \align center \begin_inset Tabular <lyxtabular version="3" rows="2" columns="2"> <features tabularvalignment="middle"> <column alignment="center" valignment="top"> <column alignment="center" valignment="top"> <row> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \begin_inset ERT status open \begin_layout Plain Layout \backslash diagbox[width=3cm,height=1.4cm]{ \end_layout \end_inset A \begin_inset ERT status collapsed \begin_layout Plain Layout \backslash \backslash \end_layout \end_inset B \begin_inset ERT status collapsed \begin_layout Plain Layout }{ \end_layout \end_inset C \begin_inset ERT status collapsed \begin_layout Plain Layout \backslash \backslash \end_layout \end_inset D \begin_inset ERT status collapsed \begin_layout Plain Layout } \end_layout \end_inset \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 厚み (nm) \end_layout \end_inset </cell> </row> <row> <cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout Perfect Green \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 45 \end_layout \end_inset </cell> </row> </lyxtabular> \end_inset \end_layout \begin_layout Standard \begin_inset ERT status collapsed \begin_layout Plain Layout \backslash else \end_layout \end_inset \begin_inset Note Note status open \begin_layout Plain Layout 以下は,\SpecialChar LaTeX パッケージ \series bold diagbox \series default が導入済みでないときに表示されます. \end_layout \end_inset \end_layout \begin_layout Standard 本節の内容を出力に表示するためには, \series bold diagbox \series default パッケージを導入しなくてはなりません. \end_layout \begin_layout Standard \begin_inset ERT status collapsed \begin_layout Plain Layout \backslash fi \end_layout \end_inset \end_layout \begin_layout Standard \SpecialChar LaTeX パッケージ \series bold diagbox \series default についての詳しい情報は,取扱説明書 \begin_inset CommandInset citation LatexCommand cite key "diagbox" literal "true" \end_inset をご覧ください. \end_layout \begin_layout Section フォーマル様式の表 \begin_inset CommandInset label LatexCommand label name "sec:フォーマル様式の表" \end_inset \begin_inset Index idx status collapsed \begin_layout Plain Layout ひょう@表 ! ふぉーまるけいしき@フォーマル様式 \end_layout \end_inset \end_layout \begin_layout Standard 書籍中の表は,よく表 \begin_inset CommandInset ref LatexCommand ref reference "tab:ブックタブ表の例" \end_inset のように組版されます.この種の表は,「 \emph on フォーマル様式 \emph default 」と呼ばれます.表をフォーマル様式にするには,表の設定ダイアログの罫線タブでフォーマル様式オプションを有効にして下さい. \end_layout \begin_layout Standard \begin_inset Float table placement h wide false sideways false status open \begin_layout Plain Layout \begin_inset Caption Standard \begin_layout Plain Layout \begin_inset CommandInset label LatexCommand label name "tab:ブックタブ表の例" \end_inset ブックタブ表の例 \end_layout \end_inset \end_layout \begin_layout Plain Layout \align center \begin_inset Tabular <lyxtabular version="3" rows="8" columns="4"> <features booktabs="true" tabularvalignment="middle"> <column alignment="center" valignment="top"> <column alignment="center" valignment="top"> <column alignment="center" valignment="top"> <column alignment="center" valignment="top"> <row> <cell alignment="center" valignment="top" topline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout システム \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout Medipix \begin_inset space \thinspace{} \end_inset 1 \end_layout \end_inset </cell> <cell multicolumn="1" alignment="center" valignment="top" topline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout Medipix \begin_inset space \thinspace{} \end_inset 2 \end_layout \end_inset </cell> <cell multicolumn="2" alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \end_layout \end_inset </cell> </row> <row> <cell alignment="center" valignment="top" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \begin_inset ERT status collapsed \begin_layout Plain Layout \backslash cmidrule(r){2-2} \end_layout \end_inset \begin_inset ERT status collapsed \begin_layout Plain Layout \backslash cmidrule(l){3-4} \end_layout \end_inset 検知器の厚み [ \begin_inset Formula $\mu m$ \end_inset ] \end_layout \end_inset </cell> <cell alignment="center" valignment="top" usebox="none"> \begin_inset Text \begin_layout Plain Layout 300 \end_layout \end_inset </cell> <cell alignment="center" valignment="top" usebox="none"> \begin_inset Text \begin_layout Plain Layout 300 \end_layout \end_inset </cell> <cell alignment="center" valignment="top" usebox="none"> \begin_inset Text \begin_layout Plain Layout 700 \end_layout \end_inset </cell> </row> <row> <cell alignment="center" valignment="top" topline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout エッジ角 [度] \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 3.55 \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 2.71 \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 7.99 \end_layout \end_inset </cell> </row> <row topspace="default"> <cell alignment="center" valignment="top" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 空間分解能 [ \begin_inset Formula $\mu m$ \end_inset ] \end_layout \end_inset </cell> <cell alignment="center" valignment="top" usebox="none"> \begin_inset Text \begin_layout Plain Layout 4.26 \end_layout \end_inset </cell> <cell alignment="center" valignment="top" usebox="none"> \begin_inset Text \begin_layout Plain Layout 10.17 \end_layout \end_inset </cell> <cell alignment="center" valignment="top" usebox="none"> \begin_inset Text \begin_layout Plain Layout 10.56 \end_layout \end_inset </cell> </row> <row topspace="default"> <cell alignment="center" valignment="top" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \begin_inset Formula $f_{\mathrm{max}}$ \end_inset におけるMTF \end_layout \end_inset </cell> <cell alignment="center" valignment="top" usebox="none"> \begin_inset Text \begin_layout Plain Layout 0.53 \end_layout \end_inset </cell> <cell alignment="center" valignment="top" usebox="none"> \begin_inset Text \begin_layout Plain Layout 0.37 \end_layout \end_inset </cell> <cell alignment="center" valignment="top" usebox="none"> \begin_inset Text \begin_layout Plain Layout 0.39 \end_layout \end_inset </cell> </row> <row topspace="default"> <cell alignment="center" valignment="top" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \begin_inset ERT status collapsed \begin_layout Plain Layout \backslash cmidrule[2pt](l{10pt}){1-1} \end_layout \end_inset LSF空間分解能 \end_layout \end_inset </cell> <cell alignment="center" valignment="top" usebox="none"> \begin_inset Text \begin_layout Plain Layout \end_layout \end_inset </cell> <cell alignment="center" valignment="top" usebox="none"> \begin_inset Text \begin_layout Plain Layout \end_layout \end_inset </cell> <cell alignment="center" valignment="top" usebox="none"> \begin_inset Text \begin_layout Plain Layout \end_layout \end_inset </cell> </row> <row> <cell alignment="center" valignment="top" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \begin_inset Formula $\mu m$ \end_inset 表示 \end_layout \end_inset </cell> <cell alignment="center" valignment="top" usebox="none"> \begin_inset Text \begin_layout Plain Layout 129.7 \end_layout \end_inset </cell> <cell alignment="center" valignment="top" usebox="none"> \begin_inset Text \begin_layout Plain Layout 52.75 \end_layout \end_inset </cell> <cell alignment="center" valignment="top" usebox="none"> \begin_inset Text \begin_layout Plain Layout 50.78 \end_layout \end_inset </cell> </row> <row> <cell alignment="center" valignment="top" bottomline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout ピクセルサイズに対する%表示 \end_layout \end_inset </cell> <cell alignment="center" valignment="top" bottomline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 76.3 \end_layout \end_inset </cell> <cell alignment="center" valignment="top" bottomline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 95.9 \end_layout \end_inset </cell> <cell alignment="center" valignment="top" bottomline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 92.3 \end_layout \end_inset </cell> </row> </lyxtabular> \end_inset \end_layout \end_inset \end_layout \begin_layout Standard 表中の行に余白を加えるには,第 \begin_inset CommandInset ref LatexCommand ref reference "subsec:行の余白取り" \end_inset 節に述べられているように,表の設定ダイアログの \family sans 罫線 \family default タブを使用します. \end_layout \begin_layout Standard 通常の表と違って,フォーマル様式の表には縦罫線がありません.表の横罫線は,通常の表と同様に指定することができますが,出力でこれらの線幅は異なります. \begin_inset Newline newline \end_inset 最初と最後の表罫線の既定幅は0.08 \begin_inset space \thinspace{} \end_inset emですが,他の罫線の既定幅は0.05 \begin_inset space \thinspace{} \end_inset emです. \end_layout \begin_layout Standard これらの既定幅は,以下のプリアンブル行を指定することによって変更することができます. \end_layout \begin_layout Standard \series bold \backslash let \backslash mytoprule \backslash toprule \begin_inset Newline newline \end_inset \backslash renewcommand{ \backslash toprule}{ \backslash mytoprule[幅]} \end_layout \begin_layout Standard 上の例は, \series bold toprule \series default という最初の罫線を設定しています.最後の罫線の線幅を変更するには, \series bold toprule \series default を \series bold bottomrule \series default に置き換えて下さい.他の罫線の線幅を変更するには, \series bold toprule \series default を \series bold midrule \series default に置き換えます.線幅を設定する上では,付録 \begin_inset CommandInset ref LatexCommand ref reference "cha:LyXで使用できる単位" \end_inset に挙げてあるすべての単位を使用することができます. \end_layout \begin_layout Standard 全列にまたがらない罫線は,連結列セルに罫線を指定することで作成することができます.\SpecialChar LyX は,内部的に \series bold \backslash cmidrule \series default コマンドを使用して,このような罫線を引きます.このコマンドの完全な書式は \end_layout \begin_layout Standard \series bold \backslash cmidrule[幅](刈込){開始列-終了列} \end_layout \begin_layout Standard です. \series bold \backslash cmidrule \series default のオプションは,現在のところ\SpecialChar LyX がサポートしていないので,オプションを使用するためには,\SpecialChar TeX コードを使わなくてはなりません. \series bold \backslash cmidrule \series default は,行の第一列の中に,最初に\SpecialChar TeX コードでこのコマンドを入れることによって,手動で指定することができます.この罫線は,出力では現在行の上に引かれることになります. \end_layout \begin_layout Standard この線幅の既定値は0.03 \begin_inset space \thinspace{} \end_inset emです.「開始列」は罫線を開始する列番号で,「終了列」は罫線を終了する列番号です.終了列は,罫線を一列だけに引きたいときも含めて,常に指定しなくてはなりません .非必須パラメーターの「刈込」は, \emph on l{刈込幅} \emph default あるいは \emph on r{刈込幅} \emph default の値を取り,刈込幅の指定は非必須です.たとえば, \emph on l{2pt} \emph default というパラメーターを使うと,罫線が左端から2 \begin_inset space \thinspace{} \end_inset ptだけ刈り込まれます.刈込幅を指定しないと,罫線は既定値の0.5 \begin_inset space \thinspace{} \end_inset emだけ刈り込まれます. \end_layout \begin_layout Standard \begin_inset VSpace bigskip \end_inset 表 \begin_inset CommandInset ref LatexCommand ref reference "tab:ブックタブ表の例" \end_inset は, \end_layout \begin_layout Standard \series bold \backslash cmidrule(r){2-2} \backslash cmidrule(l){3-4} \end_layout \begin_layout Standard というコマンドを第二行の初めに使用し, \end_layout \begin_layout Standard \series bold \backslash cmidrule[2pt](l{10pt}){1-1} \end_layout \begin_layout Standard を第六行に使用して作成されています. \end_layout \begin_layout Standard \begin_inset VSpace bigskip \end_inset \end_layout \begin_layout Standard ときには,表 \begin_inset CommandInset ref LatexCommand ref reference "tab:特殊なブックタブ表" \end_inset のような重なり合った \series bold \backslash cmidrule \series default が欲しいことがあるかもしれません.これは,\SpecialChar TeX コードで \end_layout \begin_layout Standard \series bold \backslash morecmidrules \end_layout \begin_layout Standard コマンドを使用することによって実現することができます.表 \begin_inset CommandInset ref LatexCommand ref reference "tab:特殊なブックタブ表" \end_inset の第二列には \end_layout \begin_layout Standard \series bold \backslash cmidrule(r){2-2} \backslash cmidrule(l){3-4} \backslash morecmidrules \backslash cmidrule{2-4} \end_layout \begin_layout Standard というコマンドが使用されており,第六列には \end_layout \begin_layout Standard \series bold \backslash midrule \backslash morecmidrules \backslash cmidrule{3-4} \end_layout \begin_layout Standard というコマンドが使用されています. \end_layout \begin_layout Standard \begin_inset VSpace bigskip \end_inset \end_layout \begin_layout Standard 罫線の余白取りにどうしても満足が行かない場合には, \end_layout \begin_layout Standard \series bold \backslash specialrule{幅}{上余白}{下余白} \end_layout \begin_layout Standard というコマンドを使用すれば,全列にわたる罫線を生成することができます.これらの特殊機能については,\SpecialChar LaTeX パッケージ \series bold booktabs \series default \begin_inset CommandInset citation LatexCommand cite key "booktabs" literal "true" \end_inset \begin_inset Index idx status collapsed \begin_layout Plain Layout \SpecialChar LaTeX ぱっけーじ@\SpecialChar LaTeX パッケージ ! booktabs \end_layout \end_inset の取扱説明書をご参照下さい. \end_layout \begin_layout Standard \begin_inset Float table placement h wide false sideways false status open \begin_layout Plain Layout \begin_inset Caption Standard \begin_layout Plain Layout \begin_inset CommandInset label LatexCommand label name "tab:特殊なブックタブ表" \end_inset 特殊なブックタブ表 \end_layout \end_inset \end_layout \begin_layout Plain Layout \align center \begin_inset Tabular <lyxtabular version="3" rows="8" columns="4"> <features booktabs="true" tabularvalignment="middle"> <column alignment="center" valignment="top"> <column alignment="center" valignment="top"> <column alignment="center" valignment="top"> <column alignment="center" valignment="top"> <row> <cell alignment="center" valignment="top" topline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout システム \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout Medipix \begin_inset space \thinspace{} \end_inset 1 \end_layout \end_inset </cell> <cell multicolumn="1" alignment="center" valignment="top" topline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout Medipix \begin_inset space \thinspace{} \end_inset 2 \end_layout \end_inset </cell> <cell multicolumn="2" alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \end_layout \end_inset </cell> </row> <row> <cell alignment="center" valignment="top" usebox="none"> \begin_inset Text \begin_layout Plain Layout \begin_inset ERT status collapsed \begin_layout Plain Layout \backslash cmidrule(r){2-2} \end_layout \end_inset \begin_inset ERT status collapsed \begin_layout Plain Layout \backslash cmidrule(l){3-4} \end_layout \end_inset \begin_inset ERT status collapsed \begin_layout Plain Layout \backslash morecmidrules \end_layout \end_inset \begin_inset ERT status collapsed \begin_layout Plain Layout \backslash cmidrule{2-4} \end_layout \end_inset 検知器の厚み [ \begin_inset Formula $\mu m$ \end_inset ] \end_layout \end_inset </cell> <cell alignment="center" valignment="top" usebox="none"> \begin_inset Text \begin_layout Plain Layout 300 \end_layout \end_inset </cell> <cell alignment="center" valignment="top" usebox="none"> \begin_inset Text \begin_layout Plain Layout 300 \end_layout \end_inset </cell> <cell alignment="center" valignment="top" usebox="none"> \begin_inset Text \begin_layout Plain Layout 700 \end_layout \end_inset </cell> </row> <row> <cell alignment="center" valignment="top" topline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout エッジ角 [度] \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 3.55 \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 2.71 \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 7.99 \end_layout \end_inset </cell> </row> <row topspace="default"> <cell alignment="center" valignment="top" usebox="none"> \begin_inset Text \begin_layout Plain Layout 空間分解能 [ \begin_inset Formula $\mu m$ \end_inset ] \end_layout \end_inset </cell> <cell alignment="center" valignment="top" usebox="none"> \begin_inset Text \begin_layout Plain Layout 4.26 \end_layout \end_inset </cell> <cell alignment="center" valignment="top" usebox="none"> \begin_inset Text \begin_layout Plain Layout 10.17 \end_layout \end_inset </cell> <cell alignment="center" valignment="top" usebox="none"> \begin_inset Text \begin_layout Plain Layout 10.56 \end_layout \end_inset </cell> </row> <row topspace="default"> <cell alignment="center" valignment="top" usebox="none"> \begin_inset Text \begin_layout Plain Layout \begin_inset Formula $f_{\mathrm{max}}$ \end_inset におけるMTF \end_layout \end_inset </cell> <cell alignment="center" valignment="top" usebox="none"> \begin_inset Text \begin_layout Plain Layout 0.53 \end_layout \end_inset </cell> <cell alignment="center" valignment="top" usebox="none"> \begin_inset Text \begin_layout Plain Layout 0.37 \end_layout \end_inset </cell> <cell alignment="center" valignment="top" usebox="none"> \begin_inset Text \begin_layout Plain Layout 0.39 \end_layout \end_inset </cell> </row> <row> <cell alignment="center" valignment="top" topline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \begin_inset ERT status collapsed \begin_layout Plain Layout \backslash morecmidrules \end_layout \end_inset \begin_inset ERT status collapsed \begin_layout Plain Layout \backslash cmidrule{3-4} \end_layout \end_inset LSF空間分解能 \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \end_layout \end_inset </cell> </row> <row> <cell alignment="center" valignment="top" usebox="none"> \begin_inset Text \begin_layout Plain Layout \begin_inset Formula $\mu m$ \end_inset 表示 \end_layout \end_inset </cell> <cell alignment="center" valignment="top" usebox="none"> \begin_inset Text \begin_layout Plain Layout 129.7 \end_layout \end_inset </cell> <cell alignment="center" valignment="top" usebox="none"> \begin_inset Text \begin_layout Plain Layout 52.75 \end_layout \end_inset </cell> <cell alignment="center" valignment="top" usebox="none"> \begin_inset Text \begin_layout Plain Layout 50.78 \end_layout \end_inset </cell> </row> <row> <cell alignment="center" valignment="top" bottomline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout ピクセルサイズに対する%表示 \end_layout \end_inset </cell> <cell alignment="center" valignment="top" bottomline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 76.3 \end_layout \end_inset </cell> <cell alignment="center" valignment="top" bottomline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 95.9 \end_layout \end_inset </cell> <cell alignment="center" valignment="top" bottomline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 92.3 \end_layout \end_inset </cell> </row> </lyxtabular> \end_inset \end_layout \end_inset \end_layout \begin_layout Section 表の垂直揃え \begin_inset Index idx status collapsed \begin_layout Plain Layout ひょう@表 ! そろえ@揃え \end_layout \end_inset \end_layout \begin_layout Standard 本文行中で表の垂直揃えをするには,その表をボックスの中に入れなくてはなりません.そうした上で,第 \begin_inset CommandInset ref LatexCommand ref reference "sec:ボックスダイアログ" \end_inset 節に述べられているように,ボックスの垂直揃えを行います. \end_layout \begin_layout Standard 以下の例では,各表は15 \begin_inset space \thinspace{} \end_inset 列幅%を持つminipage \begin_inset Foot status collapsed \begin_layout Plain Layout minipageは第 \begin_inset CommandInset ref LatexCommand ref reference "sec:ミニページ" \end_inset 節で説明されています. \end_layout \end_inset ボックスの中に入れてあります. \end_layout \begin_layout Itemize 動作試験 \begin_inset Box Frameless position "t" hor_pos "c" has_inner_box 1 inner_pos "c" use_parbox 0 use_makebox 0 width "15col%" special "none" height "1in" height_special "totalheight" thickness "0.4pt" separation "3pt" shadowsize "4pt" framecolor "black" backgroundcolor "none" status collapsed \begin_layout Plain Layout \begin_inset Tabular <lyxtabular version="3" rows="3" columns="3"> <features tabularvalignment="middle"> <column alignment="center" valignment="top"> <column alignment="center" valignment="top"> <column alignment="center" valignment="top"> <row> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout い \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout に \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout と \end_layout \end_inset </cell> </row> <row> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout ろ \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout ほ \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout ち \end_layout \end_inset </cell> </row> <row> <cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout は \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout へ \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout り \end_layout \end_inset </cell> </row> </lyxtabular> \end_inset \end_layout \end_inset 動作試験 \begin_inset ERT status collapsed \begin_layout Plain Layout \backslash raisebox{0.85 \backslash baselineskip}{ \end_layout \end_inset \begin_inset Box Frameless position "t" hor_pos "c" has_inner_box 1 inner_pos "c" use_parbox 0 use_makebox 0 width "15col%" special "none" height "1in" height_special "totalheight" thickness "0.4pt" separation "3pt" shadowsize "4pt" framecolor "black" backgroundcolor "none" status collapsed \begin_layout Plain Layout \begin_inset Tabular <lyxtabular version="3" rows="3" columns="3"> <features tabularvalignment="middle"> <column alignment="center" valignment="top"> <column alignment="center" valignment="top"> <column alignment="center" valignment="top"> <row> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout い \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout に \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout と \end_layout \end_inset </cell> </row> <row> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout ろ \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout ほ \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout ち \end_layout \end_inset </cell> </row> <row> <cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout は \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout へ \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout り \end_layout \end_inset </cell> </row> </lyxtabular> \end_inset \end_layout \end_inset \begin_inset ERT status collapsed \begin_layout Plain Layout } \end_layout \end_inset \end_layout \begin_layout Itemize 動作試験 \begin_inset Box Frameless position "c" hor_pos "c" has_inner_box 1 inner_pos "c" use_parbox 0 use_makebox 0 width "15col%" special "none" height "1in" height_special "totalheight" thickness "0.4pt" separation "3pt" shadowsize "4pt" framecolor "black" backgroundcolor "none" status collapsed \begin_layout Plain Layout \begin_inset Tabular <lyxtabular version="3" rows="3" columns="3"> <features tabularvalignment="middle"> <column alignment="center" valignment="top"> <column alignment="center" valignment="top"> <column alignment="center" valignment="top"> <row> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout い \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout に \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout と \end_layout \end_inset </cell> </row> <row> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout ろ \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout ほ \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout ち \end_layout \end_inset </cell> </row> <row> <cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout は \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout へ \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout り \end_layout \end_inset </cell> </row> </lyxtabular> \end_inset \end_layout \end_inset \end_layout \begin_layout Itemize 動作試験 \begin_inset Box Frameless position "b" hor_pos "c" has_inner_box 1 inner_pos "c" use_parbox 0 use_makebox 0 width "15col%" special "none" height "1in" height_special "totalheight" thickness "0.4pt" separation "3pt" shadowsize "4pt" framecolor "black" backgroundcolor "none" status collapsed \begin_layout Plain Layout \begin_inset Tabular <lyxtabular version="3" rows="3" columns="3"> <features tabularvalignment="middle"> <column alignment="center" valignment="top"> <column alignment="center" valignment="top"> <column alignment="center" valignment="top"> <row> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout い \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout に \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout と \end_layout \end_inset </cell> </row> <row> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout ろ \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout ほ \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout ち \end_layout \end_inset </cell> </row> <row> <cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout は \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout へ \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout り \end_layout \end_inset </cell> </row> </lyxtabular> \end_inset \end_layout \end_inset 動作試験 \begin_inset ERT status collapsed \begin_layout Plain Layout \backslash raisebox{-0.32 \backslash baselineskip}{ \end_layout \end_inset \begin_inset Box Frameless position "b" hor_pos "c" has_inner_box 1 inner_pos "c" use_parbox 0 use_makebox 0 width "15col%" special "none" height "1in" height_special "totalheight" thickness "0.4pt" separation "3pt" shadowsize "4pt" framecolor "black" backgroundcolor "none" status collapsed \begin_layout Plain Layout \begin_inset Tabular <lyxtabular version="3" rows="3" columns="3"> <features tabularvalignment="middle"> <column alignment="center" valignment="top"> <column alignment="center" valignment="top"> <column alignment="center" valignment="top"> <row> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout い \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout に \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout と \end_layout \end_inset </cell> </row> <row> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout ろ \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout ほ \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout ち \end_layout \end_inset </cell> </row> <row> <cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout は \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout へ \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout り \end_layout \end_inset </cell> </row> </lyxtabular> \end_inset \end_layout \end_inset \begin_inset ERT status collapsed \begin_layout Plain Layout } \end_layout \end_inset \end_layout \begin_layout Standard 上記のとおり,表の第一行あるいは最終行の中身が,表外の本文行と揃っていません.これらを揃えるには,minipageボックスをraisebox \begin_inset Foot status collapsed \begin_layout Plain Layout raiseboxは,第 \begin_inset CommandInset ref LatexCommand ref reference "subsec:垂直揃え" \end_inset 節で説明されています. \end_layout \end_inset の中に入れなくてはなりません.上記の例では,最初の項目の第二表は,ボックスの前に \end_layout \begin_layout Standard \series bold \backslash raisebox{0.85 \backslash baselineskip}{ \end_layout \begin_layout Standard という\SpecialChar TeX コードコマンドを使用して揃えています.ボックスの後には,閉じ括弧 \series bold } \series default を\SpecialChar TeX コードとして挿入してあります.最後の項目の第二表には, \end_layout \begin_layout Standard \series bold \backslash raisebox{-0.32 \backslash baselineskip}{ \end_layout \begin_layout Standard というコマンドを使用しています. \end_layout \begin_layout Standard \begin_inset Note Greyedout status open \begin_layout Plain Layout \series bold 【註】 \series default 表の行の中身の周囲の本文行への揃えは,つねに同じ値をとるわけではありません.この揃え方に必要な \series bold \backslash raisebox \series default コマンドの値は,文書フォントやフォント寸法,表罫線の線幅によって変わります. \end_layout \end_inset \end_layout \begin_layout Section 色付きの表 \begin_inset CommandInset label LatexCommand label name "sec:色付きの表" \end_inset \begin_inset Index idx status collapsed \begin_layout Plain Layout ひょう@表 ! いろつき@色付き \end_layout \end_inset \end_layout \begin_layout Subsection 色付きのセル \begin_inset Index idx status collapsed \begin_layout Plain Layout ひょうのいろ@表の色 ! せるぶ@セル部 \end_layout \end_inset \begin_inset Index idx status collapsed \begin_layout Plain Layout いろつき@色付き ! ひょうせるぶ@表セル部 \end_layout \end_inset \end_layout \begin_layout Standard \begin_inset Float table placement h wide false sideways false status open \begin_layout Plain Layout \begin_inset Caption Standard \begin_layout Plain Layout \begin_inset CommandInset label LatexCommand label name "tab:colortblなしの表" \end_inset \series bold colortbl \series default パッケージを使用しない色付き表 \begin_inset Argument 1 status collapsed \begin_layout Plain Layout colortblなしの表 \end_layout \end_inset \end_layout \end_inset \end_layout \begin_layout Plain Layout \align center \begin_inset Tabular <lyxtabular version="3" rows="3" columns="3"> <features tabularvalignment="middle"> <column alignment="center" valignment="top"> <column alignment="center" valignment="top"> <column alignment="center" valignment="top"> <row> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \color green い \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \color red ろ \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \color red は \end_layout \end_inset </cell> </row> <row> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \color green に \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \color blue ほ \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \color blue へ \end_layout \end_inset </cell> </row> <row> <cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \color green と \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \color blue ち \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \color blue り \end_layout \end_inset </cell> </row> </lyxtabular> \end_inset \end_layout \end_inset \end_layout \begin_layout Standard もし色の付いた文章が欲しいだけならば,そのセルを選択して, \family sans 編集\SpecialChar menuseparator 文字様式 \family default メニューで色を選んでください.表 \begin_inset CommandInset ref LatexCommand ref reference "tab:colortblなしの表" \end_inset を作るのに,この方法が使われています.それ以外の場合には,\SpecialChar LaTeX パッケージの \series bold colortbl \series default \begin_inset Index idx status collapsed \begin_layout Plain Layout \SpecialChar LaTeX ぱっけーじ@\SpecialChar LaTeX パッケージ ! colortbl \end_layout \end_inset を使用しなくてはなりません. \end_layout \begin_layout Standard \begin_inset ERT status collapsed \begin_layout Plain Layout \backslash ifcolortbl \end_layout \end_inset \begin_inset Note Note status open \begin_layout Plain Layout 本節の以下の部分は,\SpecialChar LaTeX パッケージ \series bold colortbl \series default が導入済みのときのみ表示されます. \end_layout \end_inset \end_layout \begin_layout Standard 色付きの表を作成するには,プリアンブルに \end_layout \begin_layout Standard \series bold \backslash usepackage{colortbl} \end_layout \begin_layout Standard という行を書いて \series bold colortbl \series default を読み込まなくてはなりません.列の色は, \series bold >{ } \series default コマンドの中に \end_layout \begin_layout Standard \series bold \backslash columncolor{色彩名} \end_layout \begin_layout Standard というコマンドを書いて指定することができます. \series bold >{} \series default コマンドに関する詳細は,第 \begin_inset CommandInset ref LatexCommand ref reference "subsec:連結列の計算" \end_inset 節に述べられています. \end_layout \begin_layout Standard 以下の色彩名が事前に定義されています. \end_layout \begin_layout Standard \family sans red \family default ・ \family sans green \family default ・ \family sans yellow \family default ・ \family sans blue \family default ・ \family sans cyan \family default ・ \family sans magenta \family default ・ \family sans black \family default ・ \family sans white \end_layout \begin_layout Standard \begin_inset VSpace medskip \end_inset \end_layout \begin_layout Standard また,文書設定中で,文書クラスオプションに \end_layout \begin_layout Standard \series bold dvipsnames \end_layout \begin_layout Standard を与えると,さらに61色を使用することができます.これらの色は,附録 \begin_inset CommandInset ref LatexCommand ref reference "chap:dvips色名一覧" \end_inset に列挙されています.それらの色の1つ, \family sans Maroon \family default が,例として表 \begin_inset CommandInset ref LatexCommand ref reference "tab:色付き表" \end_inset に使用されています. \end_layout \begin_layout Standard \begin_inset VSpace medskip \end_inset \end_layout \begin_layout Standard また \end_layout \begin_layout Standard \series bold \backslash definecolor{色彩名}{色彩モデル}{色彩値} \end_layout \begin_layout Standard というコマンドを使用すれば,自分自身の色彩を定義することができます.ここで色彩モデルは \end_layout \begin_layout Labeling \labelwidthstring 00.00.0000 cmyk: シアン(cyan)・マゼンタ(magenta)・黄(yellow)・黒(black) \end_layout \begin_layout Labeling \labelwidthstring 00.00.0000 rgb: 赤(red)・緑(green)・青(blue) \end_layout \begin_layout Labeling \labelwidthstring 00.00.0000 gray: グレー \end_layout \begin_layout Standard から選択することができ,色彩値は,0から1の間の数字をコンマで区切ったもので,それぞれ当該色彩モデルにおける各色彩の大きさを示します. \end_layout \begin_layout Standard たとえば,プリアンブルに \end_layout \begin_layout Standard \series bold \backslash definecolor{darkgreen}{cmyk}{0.5, 0, 1, 0.5} \end_layout \begin_layout Standard と書くことによって,「 \emph on darkgreen \emph default 」色を定義することができますし, \end_layout \begin_layout Standard \series bold \backslash definecolor{lightgray}{gray}{0.8} \end_layout \begin_layout Standard と書けば,「 \emph on lightgray \emph default 」色を定義することができます. \end_layout \begin_layout Standard \begin_inset VSpace medskip \end_inset \end_layout \begin_layout Standard 罫線は \end_layout \begin_layout Standard \series bold \backslash rowcolor{色彩名} \end_layout \begin_layout Standard というコマンドを使用して色付けすることができ,セルは \end_layout \begin_layout Standard \series bold \backslash cellcolor{色彩名} \end_layout \begin_layout Standard というコマンドで色付けすることができます.どちらのコマンドも,セルの冒頭に\SpecialChar TeX コードで書き込みます. \end_layout \begin_layout Standard 表中の文字に色付けをするには,セルを選択してから,\SpecialChar LyX のメニュー \family sans 編集\SpecialChar menuseparator 文字様式 \family default を使用します.セルに\SpecialChar TeX コードが入っている場合には,文章部分だけ選択してください.さもないと色付け指定された\SpecialChar TeX コードが\SpecialChar LaTeX エラーを引き起こしてしまいます. \end_layout \begin_layout Standard \begin_inset Note Greyedout status open \begin_layout Plain Layout \series bold 【註】 \series default DVIビューアーのすべてが自己定義の色を表示できるわけではありません. \end_layout \end_inset \end_layout \begin_layout Standard \begin_inset VSpace bigskip \end_inset \end_layout \begin_layout Standard 表 \begin_inset CommandInset ref LatexCommand ref reference "tab:色付き表" \end_inset を作成するには,以下のようにしてください.第一列の色は \emph on darkgreen \emph default にしたいので,この列の\SpecialChar LaTeX 変数として \end_layout \begin_layout Standard \series bold >{ \backslash columncolor{darkgreen} \backslash centering}c \end_layout \begin_layout Standard と書き込みます.第一列は青にしたいので,この列の最初のセルに \end_layout \begin_layout Standard \series bold \backslash rowcolow{cyan} \end_layout \begin_layout Standard という\SpecialChar TeX コードコマンドを書き込みます.これによって,第一セルの列色指定が上書きされてしまうことに注意してください.最終行の最後のセルは, \end_layout \begin_layout Standard \series bold \backslash cellcolor{Maroon} \end_layout \begin_layout Standard という\SpecialChar TeX コードコマンドを書き込むことで,マルーンに色づけされています.この後, \family sans 編集\SpecialChar menuseparator 文字様式 \family default メニューを使って,各文字に色付けをすることができます. \end_layout \begin_layout Standard \begin_inset Float table placement h wide false sideways false status open \begin_layout Plain Layout \begin_inset Caption Standard \begin_layout Plain Layout \series bold \begin_inset CommandInset label LatexCommand label name "tab:色付き表" \end_inset colortbl \series default パッケージを使用した色付き表 \begin_inset Argument 1 status collapsed \begin_layout Plain Layout colortblを使った表 \end_layout \end_inset \end_layout \end_inset \end_layout \begin_layout Plain Layout \align center \begin_inset Tabular <lyxtabular version="3" rows="3" columns="3"> <features tabularvalignment="middle"> <column alignment="center" valignment="top" special=">{\columncolor{darkgreen}\centering}c"> <column alignment="center" valignment="top"> <column alignment="center" valignment="top"> <row> <cell alignment="center" valignment="top" usebox="none"> \begin_inset Text \begin_layout Plain Layout \begin_inset ERT status collapsed \begin_layout Plain Layout \backslash rowcolor{cyan} \end_layout \end_inset \color magenta い \end_layout \end_inset </cell> <cell alignment="center" valignment="top" usebox="none"> \begin_inset Text \begin_layout Plain Layout \color red ろ \end_layout \end_inset </cell> <cell alignment="center" valignment="top" usebox="none"> \begin_inset Text \begin_layout Plain Layout \color red は \end_layout \end_inset </cell> </row> <row> <cell alignment="center" valignment="top" usebox="none"> \begin_inset Text \begin_layout Plain Layout \color yellow に \end_layout \end_inset </cell> <cell alignment="center" valignment="top" usebox="none"> \begin_inset Text \begin_layout Plain Layout \color blue ほ \end_layout \end_inset </cell> <cell alignment="center" valignment="top" usebox="none"> \begin_inset Text \begin_layout Plain Layout \color blue へ \end_layout \end_inset </cell> </row> <row> <cell alignment="center" valignment="top" usebox="none"> \begin_inset Text \begin_layout Plain Layout \color yellow と \end_layout \end_inset </cell> <cell alignment="center" valignment="top" usebox="none"> \begin_inset Text \begin_layout Plain Layout \color blue ち \end_layout \end_inset </cell> <cell alignment="center" valignment="top" usebox="none"> \begin_inset Text \begin_layout Plain Layout \begin_inset ERT status collapsed \begin_layout Plain Layout \backslash cellcolor{Maroon} \end_layout \end_inset \color green り \end_layout \end_inset </cell> </row> </lyxtabular> \end_inset \end_layout \end_inset \end_layout \begin_layout Standard \begin_inset ERT status collapsed \begin_layout Plain Layout \backslash else \end_layout \end_inset \begin_inset Note Note status open \begin_layout Plain Layout 以下は,\SpecialChar LaTeX パッケージ \series bold colortbl \series default が導入されていないときに表示されます. \end_layout \end_inset \end_layout \begin_layout Standard この節の内容を出力で表示させるには, \series bold colortbl \series default パッケージを導入する必要があります. \end_layout \begin_layout Standard \begin_inset ERT status collapsed \begin_layout Plain Layout \backslash fi \end_layout \end_inset \end_layout \begin_layout Subsection 色付き行 \begin_inset Index idx status collapsed \begin_layout Plain Layout ひょうのいろ@表の色 ! ぎょうぜんたい@行全体 \end_layout \end_inset \begin_inset Index idx status collapsed \begin_layout Plain Layout いろつき@色付き ! ひょうのぎょう@表の行 \end_layout \end_inset \end_layout \begin_layout Standard 表の行を交互に色付けする必要がある場合,前節に述べたのとは別な方法があります.文書プリアンブルに \end_layout \begin_layout Standard \series bold \backslash usepackage[table]{xcolor} \end_layout \begin_layout Standard というコマンドを使用して, \series bold xcolor \series default \begin_inset Index idx status collapsed \begin_layout Plain Layout \SpecialChar LaTeX ぱっけーじ@\SpecialChar LaTeX パッケージ ! xcolor \begin_inset ERT status collapsed \begin_layout Plain Layout \backslash vspace{4mm} \end_layout \end_inset \end_layout \end_inset パッケージを読み込むのです. \series bold xcolor \series default は,自動的に \series bold colortbl \series default \begin_inset Index idx status collapsed \begin_layout Plain Layout \SpecialChar LaTeX ぱっけーじ@\SpecialChar LaTeX パッケージ ! colortbl \end_layout \end_inset パッケージも読み込むので,\SpecialChar LaTeX エラーを防ぐためには,お使いの\SpecialChar LaTeX 頒布版中に \series bold colortbl \series default も導入されていなくてはなりません. \end_layout \begin_layout Standard \begin_inset ERT status collapsed \begin_layout Plain Layout \backslash ifcolortbl \end_layout \end_inset \begin_inset Note Note status open \begin_layout Plain Layout 本節の以下の部分は,\SpecialChar LaTeX パッケージ \series bold colortbl \series default が導入済みのときのみ表示されます. \end_layout \end_inset \end_layout \begin_layout Standard 表の行は,文書プリアンブル中か,色付けする最初の表の前に\SpecialChar TeX コードで \end_layout \begin_layout Standard \series bold \backslash rowcolors[コマンド]{行番号}{奇数行の色}{偶数行の色} \end_layout \begin_layout Standard というコマンドを使用すれば,色付けすることができます.ここで,「行番号」は,奇数行色で色付けする最初の行の番号です.「コマンド」は,各行の前で実行したいコマンド を付加する時に用います.したがって,例えば \end_layout \begin_layout Standard \series bold \backslash rowcolors{1}{white}{lightgray} \end_layout \begin_layout Standard というコマンドは,表 \begin_inset CommandInset ref LatexCommand ref reference "tab:表-行色" \end_inset のようなカラースキームをもたらします.また, \end_layout \begin_layout Standard \series bold \backslash rowcolors[ \backslash hline]{1}{lightgray}{cyan} \end_layout \begin_layout Standard というコマンドを用いると,表 \begin_inset CommandInset ref LatexCommand ref reference "tab:表-行色-2" \end_inset のようなカラースキームになります.「奇数行の色」ないし「偶数行の色」(またはその両方)が空のときは,色付けはされませんので, \end_layout \begin_layout Standard \series bold \backslash rowcolors{1}{}{} \end_layout \begin_layout Standard というコマンドはすべての色付けを削除することになります. \series bold \backslash rowcolors \series default は,コマンドに続くすべての表に影響を及ぼします. \end_layout \begin_layout Standard \begin_inset ERT status open \begin_layout Plain Layout \backslash rowcolors{1}{white}{lightgray} \end_layout \end_inset \end_layout \begin_layout Standard \begin_inset Float table placement h wide false sideways false status open \begin_layout Plain Layout \begin_inset Caption Standard \begin_layout Plain Layout \begin_inset CommandInset label LatexCommand label name "tab:表-行色" \end_inset 隔行が灰色に着色された表 \end_layout \end_inset \end_layout \begin_layout Plain Layout \align center \begin_inset Tabular <lyxtabular version="3" rows="4" columns="3"> <features tabularvalignment="middle"> <column alignment="center" valignment="top"> <column alignment="center" valignment="top" width="0pt"> <column alignment="center" valignment="top" width="0pt"> <row> <cell alignment="center" valignment="top" usebox="none"> \begin_inset Text \begin_layout Plain Layout せ \end_layout \end_inset </cell> <cell alignment="center" valignment="top" usebox="none"> \begin_inset Text \begin_layout Plain Layout す \end_layout \end_inset </cell> <cell alignment="center" valignment="top" usebox="none"> \begin_inset Text \begin_layout Plain Layout ん \end_layout \end_inset </cell> </row> <row> <cell alignment="center" valignment="top" usebox="none"> \begin_inset Text \begin_layout Plain Layout 1 \end_layout \end_inset </cell> <cell alignment="center" valignment="top" usebox="none"> \begin_inset Text \begin_layout Plain Layout 2 \end_layout \end_inset </cell> <cell alignment="center" valignment="top" usebox="none"> \begin_inset Text \begin_layout Plain Layout 3 \end_layout \end_inset </cell> </row> <row> <cell alignment="center" valignment="top" usebox="none"> \begin_inset Text \begin_layout Plain Layout 4 \end_layout \end_inset </cell> <cell alignment="center" valignment="top" usebox="none"> \begin_inset Text \begin_layout Plain Layout 5 \end_layout \end_inset </cell> <cell alignment="center" valignment="top" usebox="none"> \begin_inset Text \begin_layout Plain Layout 6 \end_layout \end_inset </cell> </row> <row> <cell alignment="center" valignment="top" usebox="none"> \begin_inset Text \begin_layout Plain Layout 7 \end_layout \end_inset </cell> <cell alignment="center" valignment="top" usebox="none"> \begin_inset Text \begin_layout Plain Layout 8 \end_layout \end_inset </cell> <cell alignment="center" valignment="top" usebox="none"> \begin_inset Text \begin_layout Plain Layout 9 \end_layout \end_inset </cell> </row> </lyxtabular> \end_inset \end_layout \end_inset \end_layout \begin_layout Standard \begin_inset ERT status open \begin_layout Plain Layout \backslash rowcolors[ \backslash hline]{1}{lightgray}{cyan} \end_layout \end_inset \end_layout \begin_layout Standard \begin_inset Float table placement h wide false sideways false status open \begin_layout Plain Layout \begin_inset Caption Standard \begin_layout Plain Layout \begin_inset CommandInset label LatexCommand label name "tab:表-行色-2" \end_inset 隔行でシアン色に着色され,行間に線の入った表 \end_layout \end_inset \end_layout \begin_layout Plain Layout \align center \begin_inset Tabular <lyxtabular version="3" rows="4" columns="3"> <features tabularvalignment="middle"> <column alignment="center" valignment="top"> <column alignment="center" valignment="top"> <column alignment="center" valignment="top" width="0pt"> <row> <cell alignment="center" valignment="top" usebox="none"> \begin_inset Text \begin_layout Plain Layout せ \end_layout \end_inset </cell> <cell alignment="center" valignment="top" usebox="none"> \begin_inset Text \begin_layout Plain Layout す \end_layout \end_inset </cell> <cell alignment="center" valignment="top" usebox="none"> \begin_inset Text \begin_layout Plain Layout ん \end_layout \end_inset </cell> </row> <row> <cell alignment="center" valignment="top" usebox="none"> \begin_inset Text \begin_layout Plain Layout 1 \end_layout \end_inset </cell> <cell alignment="center" valignment="top" usebox="none"> \begin_inset Text \begin_layout Plain Layout 2 \end_layout \end_inset </cell> <cell alignment="center" valignment="top" usebox="none"> \begin_inset Text \begin_layout Plain Layout 3 \end_layout \end_inset </cell> </row> <row> <cell alignment="center" valignment="top" usebox="none"> \begin_inset Text \begin_layout Plain Layout 4 \end_layout \end_inset </cell> <cell alignment="center" valignment="top" usebox="none"> \begin_inset Text \begin_layout Plain Layout 5 \end_layout \end_inset </cell> <cell alignment="center" valignment="top" usebox="none"> \begin_inset Text \begin_layout Plain Layout 6 \end_layout \end_inset </cell> </row> <row> <cell alignment="center" valignment="top" usebox="none"> \begin_inset Text \begin_layout Plain Layout 7 \end_layout \end_inset </cell> <cell alignment="center" valignment="top" usebox="none"> \begin_inset Text \begin_layout Plain Layout 8 \end_layout \end_inset </cell> <cell alignment="center" valignment="top" usebox="none"> \begin_inset Text \begin_layout Plain Layout 9 \end_layout \end_inset </cell> </row> </lyxtabular> \end_inset \end_layout \end_inset \end_layout \begin_layout Standard \begin_inset ERT status collapsed \begin_layout Plain Layout \backslash rowcolors{1}{}{} \end_layout \end_inset \begin_inset Note Note status collapsed \begin_layout Plain Layout 行色を解除 \end_layout \end_inset \end_layout \begin_layout Standard \begin_inset ERT status collapsed \begin_layout Plain Layout \backslash else \end_layout \end_inset \begin_inset Note Note status open \begin_layout Plain Layout 以下は,\SpecialChar LaTeX パッケージ \series bold colortbl \series default が導入されていないときに表示されます. \end_layout \end_inset \end_layout \begin_layout Standard この節の内容を出力で表示させるには, \series bold colortbl \series default パッケージを導入する必要があります. \end_layout \begin_layout Standard \begin_inset ERT status collapsed \begin_layout Plain Layout \backslash fi \end_layout \end_inset \end_layout \begin_layout Subsection 色付き罫線 \begin_inset Index idx status collapsed \begin_layout Plain Layout ひょうのいろ@表の色 ! けいせんぶ@罫線部 \end_layout \end_inset \begin_inset Index idx status collapsed \begin_layout Plain Layout いろつき@色付き ! ひょうけいせんぶ@表罫線部 \end_layout \end_inset \end_layout \begin_layout Standard 第 \begin_inset CommandInset ref LatexCommand ref reference "subsec:罫線幅" \end_inset 節に述べられているように,表中の全罫線の線幅は,長さ \series bold \backslash arrayrulewidth \series default を使って調節することができます.本節の表では,すべて1.5 \begin_inset space \thinspace{} \end_inset ptに設定されています. \begin_inset ERT status collapsed \begin_layout Plain Layout \backslash setlength{ \backslash arrayrulewidth}{1.5pt} \end_layout \end_inset \end_layout \begin_layout Standard たとえば縦罫線を緑に着色するには,第 \begin_inset CommandInset ref LatexCommand ref reference "subsec:自製書式" \end_inset 節の説明にしたがって,以下の列書式を文書プリアンブル中で作成して下さい. \end_layout \begin_layout Standard \series bold \backslash newcolumntype{W}{!{ \backslash color{green} \backslash vline}} \end_layout \begin_layout Standard 表 \begin_inset CommandInset ref LatexCommand ref reference "tab:色付き縦罫線の表" \end_inset では,最右列に\SpecialChar LaTeX 変数 \series bold WcW \series default ,他の列に\SpecialChar LaTeX 変数 \series bold Wc \series default が使用されています. \end_layout \begin_layout Standard 複数の色を用いたいときには,列書式をもっと定義してください. \end_layout \begin_layout Standard \begin_inset Float table placement h wide false sideways false status open \begin_layout Plain Layout \begin_inset Caption Standard \begin_layout Plain Layout \begin_inset CommandInset label LatexCommand label name "tab:色付き縦罫線の表" \end_inset 色付き縦罫線の表 \end_layout \end_inset \end_layout \begin_layout Plain Layout \align center \begin_inset Tabular <lyxtabular version="3" rows="3" columns="3"> <features tabularvalignment="middle"> <column alignment="center" valignment="top" special="Wc"> <column alignment="center" valignment="top" special="Wc"> <column alignment="center" valignment="top" special="WcW"> <row> <cell alignment="center" valignment="top" topline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout sd \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \end_layout \end_inset </cell> </row> <row> <cell alignment="center" valignment="top" topline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout sd \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \end_layout \end_inset </cell> </row> <row> <cell alignment="center" valignment="top" topline="true" bottomline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" bottomline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" bottomline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout sd \end_layout \end_inset </cell> </row> </lyxtabular> \end_inset \end_layout \end_inset \end_layout \begin_layout Standard \begin_inset VSpace bigskip \end_inset 表 \begin_inset CommandInset ref LatexCommand ref reference "tab:色付き横罫線の表" \end_inset のように,たとえば横罫線を赤にしたいときには,表ないし表フロートの前に\SpecialChar TeX コードで \end_layout \begin_layout Standard \series bold \backslash let \backslash myHlineC \backslash hline \begin_inset Newline newline \end_inset \backslash renewcommand{ \backslash hline} \begin_inset Newline newline \end_inset \begin_inset Phantom HPhantom status open \begin_layout Plain Layout \begin_inset space ~ \end_inset \end_layout \end_inset { \backslash arrayrulecolor{red} \backslash myHlineC \backslash arrayrulecolor{black}} \end_layout \begin_layout Standard というコマンドを入力して下さい. \end_layout \begin_layout Standard \begin_inset ERT status collapsed \begin_layout Plain Layout \backslash let \backslash myHlineC \backslash hline \end_layout \begin_layout Plain Layout \backslash renewcommand{ \backslash hline} \end_layout \begin_layout Plain Layout { \backslash arrayrulecolor{red} \backslash myHlineC \backslash arrayrulecolor{black}} \end_layout \end_inset \begin_inset Float table placement h wide false sideways false status open \begin_layout Plain Layout \begin_inset Caption Standard \begin_layout Plain Layout \begin_inset CommandInset label LatexCommand label name "tab:色付き横罫線の表" \end_inset 色付き横罫線の表 \end_layout \end_inset \end_layout \begin_layout Plain Layout \align center \begin_inset Tabular <lyxtabular version="3" rows="3" columns="3"> <features tabularvalignment="middle"> <column alignment="center" valignment="top"> <column alignment="center" valignment="top"> <column alignment="center" valignment="top"> <row> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout sd \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \end_layout \end_inset </cell> </row> <row> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout sd \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \end_layout \end_inset </cell> </row> <row> <cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout sd \end_layout \end_inset </cell> </row> </lyxtabular> \end_inset \end_layout \end_inset \end_layout \begin_layout Standard 既定値の黒罫線に戻るには, \end_layout \begin_layout Standard \series bold \backslash renewcommand{ \backslash hline}{ \backslash myHlineC} \end_layout \begin_layout Standard というコマンドを,表ないし表フロートの後に\SpecialChar TeX コードで入力して下さい.表 \begin_inset CommandInset ref LatexCommand ref reference "tab:色付き罫線の表" \end_inset は,縦横罫線を色付けした例です. \end_layout \begin_layout Standard \begin_inset Float table placement h wide false sideways false status open \begin_layout Plain Layout \begin_inset Caption Standard \begin_layout Plain Layout \begin_inset CommandInset label LatexCommand label name "tab:色付き罫線の表" \end_inset 色付き罫線の表 \end_layout \end_inset \end_layout \begin_layout Plain Layout \align center \begin_inset Tabular <lyxtabular version="3" rows="3" columns="3"> <features tabularvalignment="middle"> <column alignment="center" valignment="top" special="Wc"> <column alignment="center" valignment="top" special="Wc"> <column alignment="center" valignment="top" special="WcW"> <row> <cell alignment="center" valignment="top" topline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout sd \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \end_layout \end_inset </cell> </row> <row> <cell alignment="center" valignment="top" topline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout sd \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \end_layout \end_inset </cell> </row> <row topspace="default"> <cell alignment="center" valignment="top" topline="true" bottomline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" bottomline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" bottomline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout sd \end_layout \end_inset </cell> </row> </lyxtabular> \end_inset \end_layout \end_inset \end_layout \begin_layout Standard \begin_inset ERT status collapsed \begin_layout Plain Layout \backslash renewcommand{ \backslash hline}{ \backslash myHlineC} \end_layout \end_inset \end_layout \begin_layout Standard \begin_inset ERT status collapsed \begin_layout Plain Layout \backslash setlength{ \backslash arrayrulewidth}{1.2pt} \end_layout \end_inset \end_layout \begin_layout Standard \lang english To color only some of the table lines another strategy is necessary. To color all following horizontal lines, insert this command as \SpecialChar TeX code as last thing in the row that should be above the first colored line: \end_layout \begin_layout Standard \series bold \backslash \backslash \backslash arrayrulecolor{blue}% \end_layout \begin_layout Standard \lang english To go back to black lines, add this command as first thing in the row that is above the black lines: \end_layout \begin_layout Standard \series bold \backslash arrayrulecolor{black} \end_layout \begin_layout Standard \lang english With this one can color table lines like in Table \begin_inset space ~ \end_inset \begin_inset CommandInset ref LatexCommand ref reference "tab:Table-with-different-hor" \end_inset . However, with this method it is not possible to color the line above the first row of a table. \end_layout \begin_layout Standard \begin_inset Float table wide false sideways false status open \begin_layout Plain Layout \begin_inset Caption Standard \begin_layout Plain Layout \lang english \begin_inset CommandInset label LatexCommand label name "tab:Table-with-different-hor" \end_inset Table with different horizontal line colors. \end_layout \end_inset \end_layout \begin_layout Plain Layout \align center \begin_inset Tabular <lyxtabular version="3" rows="6" columns="7"> <features tabularvalignment="middle"> <column alignment="center" valignment="top"> <column alignment="center" valignment="top"> <column alignment="center" valignment="top"> <column alignment="center" valignment="top"> <column alignment="center" valignment="top"> <column alignment="center" valignment="top"> <column alignment="center" valignment="top"> <row> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \begin_inset ERT status open \begin_layout Plain Layout \backslash \backslash \backslash arrayrulecolor{blue}% \end_layout \end_inset \end_layout \end_inset </cell> </row> <row> <cell alignment="center" valignment="top" usebox="none"> \begin_inset Text \begin_layout Plain Layout Y \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" bottomline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" bottomline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" bottomline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" bottomline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \end_layout \end_inset </cell> <cell alignment="center" valignment="top" usebox="none"> \begin_inset Text \begin_layout Plain Layout Y \end_layout \end_inset </cell> </row> <row> <cell alignment="center" valignment="top" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \begin_inset ERT status open \begin_layout Plain Layout \backslash arrayrulecolor{black} \end_layout \end_inset \end_layout \end_inset </cell> <cell alignment="center" valignment="top" usebox="none"> \begin_inset Text \begin_layout Plain Layout \end_layout \end_inset </cell> <cell alignment="center" valignment="top" usebox="none"> \begin_inset Text \begin_layout Plain Layout \end_layout \end_inset </cell> <cell alignment="center" valignment="top" usebox="none"> \begin_inset Text \begin_layout Plain Layout \end_layout \end_inset </cell> <cell alignment="center" valignment="top" usebox="none"> \begin_inset Text \begin_layout Plain Layout \end_layout \end_inset </cell> <cell alignment="center" valignment="top" usebox="none"> \begin_inset Text \begin_layout Plain Layout \end_layout \end_inset </cell> <cell alignment="center" valignment="top" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \end_layout \end_inset </cell> </row> <row> <cell alignment="center" valignment="top" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \end_layout \end_inset </cell> <cell alignment="center" valignment="top" usebox="none"> \begin_inset Text \begin_layout Plain Layout \end_layout \end_inset </cell> <cell alignment="center" valignment="top" usebox="none"> \begin_inset Text \begin_layout Plain Layout \end_layout \end_inset </cell> <cell alignment="center" valignment="top" usebox="none"> \begin_inset Text \begin_layout Plain Layout \end_layout \end_inset </cell> <cell alignment="center" valignment="top" usebox="none"> \begin_inset Text \begin_layout Plain Layout \end_layout \end_inset </cell> <cell alignment="center" valignment="top" usebox="none"> \begin_inset Text \begin_layout Plain Layout \end_layout \end_inset </cell> <cell alignment="center" valignment="top" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \begin_inset ERT status collapsed \begin_layout Plain Layout \backslash \backslash \backslash arrayrulecolor{green}% \end_layout \end_inset \end_layout \end_inset </cell> </row> <row> <cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" bottomline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" bottomline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" bottomline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" bottomline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" bottomline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" bottomline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \end_layout \end_inset </cell> </row> <row> <cell alignment="center" valignment="top" bottomline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \begin_inset ERT status collapsed \begin_layout Plain Layout \backslash arrayrulecolor{black} \end_layout \end_inset B \end_layout \end_inset </cell> <cell alignment="center" valignment="top" bottomline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \end_layout \end_inset </cell> <cell alignment="center" valignment="top" bottomline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \end_layout \end_inset </cell> <cell alignment="center" valignment="top" bottomline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \end_layout \end_inset </cell> <cell alignment="center" valignment="top" bottomline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \end_layout \end_inset </cell> <cell alignment="center" valignment="top" bottomline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \end_layout \end_inset </cell> <cell alignment="center" valignment="top" bottomline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \begin_inset ERT status collapsed \begin_layout Plain Layout \backslash \backslash \backslash arrayrulecolor{blue}% \end_layout \end_inset \end_layout \end_inset </cell> </row> </lyxtabular> \end_inset \end_layout \end_inset \end_layout \begin_layout Standard \lang english To change the color of vertical lines within a row, like in Table \begin_inset space ~ \end_inset \begin_inset CommandInset ref LatexCommand ref reference "tab:Table-with-different-ver" \end_inset , one needs to use multicolumns. At first one needs to remove all vertical lines that don't run along the whole column. Now one colors all lines using the command \end_layout \begin_layout Standard \series bold \backslash \backslash \backslash arrayrulecolor{blue}% \end_layout \begin_layout Standard \lang english as above. Finally one inserts this command as \SpecialChar TeX code to every cell in the row where one needs a vertical line in a different color: \end_layout \begin_layout Standard \series bold \backslash multicolumn{1}{!{ \backslash color{green} \backslash vline}c!{ \backslash color{red} \backslash vline}}{ \end_layout \begin_layout Standard \lang english This adds a vertical line to both sides of the cell. The left one will be green, the right one red. If no color change is necessary one can omit the \series bold \backslash color \series default command in the above command. To get for example a black left line and a blue right line you can write: \end_layout \begin_layout Standard \series bold \backslash multicolumn{1}{!{ \backslash color{black} \backslash vline}c|}{ \end_layout \begin_layout Standard \lang english because the color blue was already set for all lines. The \series bold | \series default creates hereby the vertical line while \series bold \backslash vline \series default does this when \series bold \backslash color \series default is used. To set vertical lines without changing any color use \end_layout \begin_layout Standard \series bold \backslash multicolumn{1}{|c|}{ \end_layout \begin_layout Standard \lang english After this command insert the cell content the normal way and end the cell with a closing brace \series bold } \series default in \SpecialChar TeX code. \end_layout \begin_layout Standard \begin_inset Float table wide false sideways false status open \begin_layout Plain Layout \begin_inset Caption Standard \begin_layout Plain Layout \lang english \begin_inset CommandInset label LatexCommand label name "tab:Table-with-different-ver" \end_inset Table with different vertical line colors in one row. \end_layout \end_inset \end_layout \begin_layout Plain Layout \align center \begin_inset Tabular <lyxtabular version="3" rows="5" columns="7"> <features tabularvalignment="middle"> <column alignment="center" valignment="top"> <column alignment="center" valignment="top"> <column alignment="center" valignment="top"> <column alignment="center" valignment="top"> <column alignment="center" valignment="top"> <column alignment="center" valignment="top"> <column alignment="center" valignment="top"> <row> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \begin_inset ERT status open \begin_layout Plain Layout \backslash \backslash \backslash arrayrulecolor{red}% \end_layout \end_inset \end_layout \end_inset </cell> </row> <row> <cell alignment="center" valignment="top" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \begin_inset ERT status open \begin_layout Plain Layout \backslash multicolumn{1}{!{ \backslash color{black} \backslash vline}c|}{ \end_layout \end_inset Y \begin_inset ERT status collapsed \begin_layout Plain Layout } \end_layout \end_inset \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" bottomline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" bottomline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" bottomline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" bottomline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" bottomline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \begin_inset ERT status open \begin_layout Plain Layout \backslash multicolumn{1}{c|}{ \end_layout \end_inset \begin_inset ERT status collapsed \begin_layout Plain Layout } \end_layout \end_inset \end_layout \end_inset </cell> <cell alignment="center" valignment="top" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \begin_inset ERT status open \begin_layout Plain Layout \backslash multicolumn{1}{c!{ \backslash color{black} \backslash vline}}{ \end_layout \end_inset Y \begin_inset ERT status collapsed \begin_layout Plain Layout } \end_layout \end_inset \end_layout \end_inset </cell> </row> <row> <cell alignment="center" valignment="top" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \begin_inset ERT status collapsed \begin_layout Plain Layout \backslash arrayrulecolor{black} \end_layout \end_inset \end_layout \end_inset </cell> <cell alignment="center" valignment="top" usebox="none"> \begin_inset Text \begin_layout Plain Layout \end_layout \end_inset </cell> <cell alignment="center" valignment="top" usebox="none"> \begin_inset Text \begin_layout Plain Layout \end_layout \end_inset </cell> <cell alignment="center" valignment="top" usebox="none"> \begin_inset Text \begin_layout Plain Layout \end_layout \end_inset </cell> <cell alignment="center" valignment="top" usebox="none"> \begin_inset Text \begin_layout Plain Layout \end_layout \end_inset </cell> <cell alignment="center" valignment="top" usebox="none"> \begin_inset Text \begin_layout Plain Layout \end_layout \end_inset </cell> <cell alignment="center" valignment="top" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \begin_inset ERT status collapsed \begin_layout Plain Layout \backslash \backslash \backslash arrayrulecolor{magenta}% \end_layout \end_inset \end_layout \end_inset </cell> </row> <row> <cell alignment="center" valignment="top" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \begin_inset ERT status collapsed \begin_layout Plain Layout \backslash multicolumn{1}{|c!{ \backslash color{red} \backslash vline}}{ \end_layout \end_inset \begin_inset ERT status collapsed \begin_layout Plain Layout } \end_layout \end_inset \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" bottomline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \begin_inset ERT status collapsed \begin_layout Plain Layout \backslash multicolumn{1}{c!{ \backslash color{green} \backslash vline}}{ \end_layout \end_inset \begin_inset ERT status collapsed \begin_layout Plain Layout } \end_layout \end_inset \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" bottomline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \begin_inset ERT status collapsed \begin_layout Plain Layout \backslash multicolumn{1}{c!{ \backslash color{yellow} \backslash vline}}{ \end_layout \end_inset \begin_inset ERT status collapsed \begin_layout Plain Layout } \end_layout \end_inset \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" bottomline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \begin_inset ERT status collapsed \begin_layout Plain Layout \backslash multicolumn{1}{c!{ \backslash color{blue} \backslash vline}}{ \end_layout \end_inset \begin_inset ERT status collapsed \begin_layout Plain Layout } \end_layout \end_inset \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" bottomline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \begin_inset ERT status collapsed \begin_layout Plain Layout \backslash multicolumn{1}{c!{ \backslash color{cyan} \backslash vline}}{ \end_layout \end_inset \begin_inset ERT status collapsed \begin_layout Plain Layout } \end_layout \end_inset \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" bottomline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \begin_inset ERT status collapsed \begin_layout Plain Layout \backslash multicolumn{1}{c!{ \backslash color{black} \backslash vline}}{ \end_layout \end_inset \begin_inset ERT status collapsed \begin_layout Plain Layout } \end_layout \end_inset \end_layout \end_inset </cell> <cell alignment="center" valignment="top" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \begin_inset ERT status collapsed \begin_layout Plain Layout \backslash multicolumn{1}{c|}{ \end_layout \end_inset \begin_inset ERT status collapsed \begin_layout Plain Layout } \end_layout \end_inset \end_layout \end_inset </cell> </row> <row> <cell alignment="center" valignment="top" bottomline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \begin_inset ERT status collapsed \begin_layout Plain Layout \backslash arrayrulecolor{black} \end_layout \end_inset B \end_layout \end_inset </cell> <cell alignment="center" valignment="top" bottomline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \end_layout \end_inset </cell> <cell alignment="center" valignment="top" bottomline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \end_layout \end_inset </cell> <cell alignment="center" valignment="top" bottomline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \end_layout \end_inset </cell> <cell alignment="center" valignment="top" bottomline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \end_layout \end_inset </cell> <cell alignment="center" valignment="top" bottomline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \end_layout \end_inset </cell> <cell alignment="center" valignment="top" bottomline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \end_layout \end_inset </cell> </row> </lyxtabular> \end_inset \end_layout \end_inset \end_layout \begin_layout Standard \begin_inset ERT status collapsed \begin_layout Plain Layout \backslash setlength{ \backslash arrayrulewidth}{0.4pt} \end_layout \end_inset \end_layout \begin_layout Section 表セルの回転 \begin_inset CommandInset label LatexCommand label name "sec:表セルの回転" \end_inset \begin_inset Index idx status collapsed \begin_layout Plain Layout ひょう@表 ! せるのかいてん@セルの回転 \end_layout \end_inset \begin_inset Index idx status collapsed \begin_layout Plain Layout かいてん@回転 ! そざいの@素材の— \end_layout \end_inset \end_layout \begin_layout Standard \begin_inset Note Greyedout status open \begin_layout Plain Layout \series bold 【註】 \series default すべてのDVIビューアが回転表示できるわけではありません. \end_layout \end_inset \end_layout \begin_layout Standard と入れてください.表 \begin_inset CommandInset ref LatexCommand ref reference "tab:回転表" \end_inset は,3つのセルを45°回転させた用例です. \end_layout \begin_layout Standard \begin_inset Float table wide false sideways false status open \begin_layout Plain Layout \begin_inset Caption Standard \begin_layout Plain Layout \begin_inset CommandInset label LatexCommand label name "tab:回転表" \end_inset 1行目に回転セルのある表 \end_layout \end_inset \end_layout \begin_layout Plain Layout \noindent \align center \begin_inset Tabular <lyxtabular version="3" rows="2" columns="3"> <features tabularvalignment="middle"> <column alignment="center" valignment="top" width="0pt"> <column alignment="center" valignment="top" width="0pt"> <column alignment="center" valignment="top" width="0pt"> <row> <cell alignment="center" valignment="top" rotate="45" usebox="none"> \begin_inset Text \begin_layout Plain Layout コップ \end_layout \end_inset </cell> <cell alignment="center" valignment="top" rotate="45" usebox="none"> \begin_inset Text \begin_layout Plain Layout 皿 \end_layout \end_inset </cell> <cell alignment="center" valignment="top" rotate="45" usebox="none"> \begin_inset Text \begin_layout Plain Layout 受け皿 \end_layout \end_inset </cell> </row> <row> <cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 45 \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 33 \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 21 \end_layout \end_inset </cell> </row> </lyxtabular> \end_inset \end_layout \end_inset \end_layout \begin_layout Standard \begin_inset Note Greyedout status open \begin_layout Plain Layout \series bold 【註】 \series default 回転セル中では,改行( \begin_inset Flex Ruby status collapsed \begin_layout Plain Layout 捷径 \begin_inset Argument post:1 status collapsed \begin_layout Plain Layout ショートカット \end_layout \end_inset \end_layout \end_inset \begin_inset Info type "shortcut" arg "newline-insert newline" \end_inset )はできません. \end_layout \end_inset \end_layout \begin_layout Standard 改行を含むセルを回転させたい場合には,セルの内容をminipageかparboxに置かなくてはなりません \begin_inset Foot status collapsed \begin_layout Plain Layout これらのボックスについて詳しくは,第 \begin_inset CommandInset ref LatexCommand ref reference "sec:ミニページ" \end_inset 節および第 \begin_inset CommandInset ref LatexCommand ref reference "sec:Parboxes" \end_inset 節をご覧ください. \end_layout \end_inset .このセルを90 \begin_inset space \thinspace{} \end_inset °回転させると,ボックス幅はセルの高さになります.表 \begin_inset CommandInset ref LatexCommand ref reference "tab:表多行回転" \end_inset は,ボックス幅が3 \begin_inset space \thinspace{} \end_inset cmの,多行セルを回転させる例です. \end_layout \begin_layout Standard \begin_inset Float table wide false sideways false status open \begin_layout Plain Layout \begin_inset Caption Standard \begin_layout Plain Layout \begin_inset CommandInset label LatexCommand label name "tab:表多行回転" \end_inset 多行セルを回転させた表 \end_layout \end_inset \end_layout \begin_layout Plain Layout \noindent \align center \begin_inset Tabular <lyxtabular version="3" rows="2" columns="3"> <features tabularvalignment="middle"> <column alignment="center" valignment="top"> <column alignment="center" valignment="top" width="0pt"> <column alignment="center" valignment="top"> <row> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout い \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" rotate="90" usebox="none"> \begin_inset Text \begin_layout Plain Layout \begin_inset Box Frameless position "t" hor_pos "c" has_inner_box 1 inner_pos "t" use_parbox 0 use_makebox 0 width "3cm" special "none" height "1in" height_special "totalheight" thickness "0.4pt" separation "3pt" shadowsize "4pt" framecolor "black" backgroundcolor "none" status open \begin_layout Plain Layout 改行を含む \begin_inset Newline newline \end_inset 回転 \end_layout \end_inset \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout ほ \end_layout \end_inset </cell> </row> <row> <cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout ろ \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout は \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout に \end_layout \end_inset </cell> </row> </lyxtabular> \end_inset \end_layout \end_inset \end_layout \begin_layout Section 表幅の計算 \begin_inset CommandInset label LatexCommand label name "sec:表幅の計算" \end_inset \end_layout \begin_layout Standard 幅広の表では,表がページ余白に突き出てしまわないように調整するのが難しいことがあります.表中の全列に固定幅を設定する方法もありますが,では各列にどれくらいの幅を 設ければ良いのでしょうか? \end_layout \begin_layout Standard 表幅 \begin_inset Formula $W_{\text{表}}$ \end_inset は計算することができます.各列の実際の幅は,指定した列幅 \begin_inset Formula $W_{\text{列}}$ \end_inset に,列の内容と列罫線との間の余白(\SpecialChar LaTeX 長 \series bold \backslash tabcolsep \series default ・既定値6 \begin_inset space \thinspace{} \end_inset pt)の2倍と,罫線幅(\SpecialChar LaTeX 長 \series bold \backslash arrayrulewidth \series default ・既定値0.4 \begin_inset space \thinspace{} \end_inset pt)を加えたものになります.したがって,もし同じ幅の \begin_inset Formula $n$ \end_inset 列を作るならば,表幅は \begin_inset Formula \begin{equation} W_{\text{表}}=n\left(W_{\text{列}}+2\backslash\mbox{tabcolsep}+\backslash\mbox{arrayrulewidth}\right)+\backslash\mbox{arrayrulewidth} \end{equation} \end_inset \end_layout \begin_layout Standard となります.表が使用できる幅は,ページ余白の間の幅か,本文段幅(二段組文書の場合)です(\SpecialChar LaTeX 長 \series bold \backslash columnwidth \series default ).表の列をすべて同じ幅にするとすれば, \begin_inset Formula $W_{\text{表}}$ \end_inset が1 \begin_inset space \thinspace{} \end_inset \backslash columnwidthになりますので, \begin_inset Formula $W_{\text{列}}$ \end_inset は簡単に計算できます. \end_layout \begin_layout Standard 計算を行わせる場合には,文書プリアンブル中で\SpecialChar LaTeX パッケージ \series bold calc \series default \begin_inset Index idx status collapsed \begin_layout Plain Layout \SpecialChar LaTeX ぱっけーじ@\SpecialChar LaTeX パッケージ ! calc \end_layout \end_inset を読みこませる必要があります.表ダイアログ中で幅を設定するには, \family sans \SpecialChar LaTeX の引数 \family default フィールドに書きこまなくてはなりません.このフィールドのコマンドスキームは,第 \begin_inset CommandInset ref LatexCommand ref reference "subsec:連結列の計算" \end_inset 節で説明したのと同様です.同幅中央揃え5列の表ならば,各列の同フィールドに \end_layout \begin_layout Standard \series bold >{ \backslash centering}p{(1 \backslash columnwidth-62.4pt)/5} \end_layout \begin_layout Standard というコマンドを入力します.5列の表で,うち2列が他の3列の幅の0.75倍であるような表の場合には,計算は \begin_inset Formula \begin{align} \backslash\mbox{columnwidth} & =3\,W_{\text{列}}+2\cdot0.75\,W_{\text{列}}+\backslash\mbox{arrayrulewidth}\nonumber \\ & \phantom{=\,}+5\left(2\backslash\mbox{tabcolsep}+\backslash\mbox{arrayrulewidth}\right)\nonumber \\ & =4.5\,W_{\text{列}}+62.4\,\mathrm{pt}\nonumber \\ W_{\text{列}} & =\frac{\backslash\mbox{columnwidth}-62.4\,\mathrm{pt}}{4.5} \end{align} \end_inset \end_layout \begin_layout Standard となります.したがって,表中の広い列には \end_layout \begin_layout Standard \series bold >{ \backslash centering}p{(1 \backslash columnwidth-62.4pt)/ \backslash real{4.5}} \end_layout \begin_layout Standard というコマンドを用い,狭い列には \end_layout \begin_layout Standard \series bold >{ \backslash centering}p{(1 \backslash columnwidth-62.4pt)/ \backslash real{4.5}* \backslash real{0.75}} \end_layout \begin_layout Standard というコマンドを用いることにすると,以下の表が出来上がります. \end_layout \begin_layout Standard \begin_inset Tabular <lyxtabular version="3" rows="2" columns="5"> <features tabularvalignment="middle"> <column alignment="center" valignment="top" width="20col%" special=">{\centering}p{(1\columnwidth-62.4pt)/\real{4.5}}"> <column alignment="center" valignment="top" width="0pt" special=">{\centering}p{(1\columnwidth-62.4pt)/\real{4.5}*\real{0.75}}"> <column alignment="center" valignment="top" width="20col%" special=">{\centering}p{(1\columnwidth-62.4pt)/\real{4.5}}"> <column alignment="center" valignment="top" width="0pt" special=">{\centering}p{(1\columnwidth-62.4pt)/\real{4.5}*\real{0.75}}"> <column alignment="center" valignment="top" width="20col%" special=">{\centering}p{(1\columnwidth-62.4pt)/\real{4.5}}"> <row> <cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 1 \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 2 \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 3 \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 4 \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 5 \end_layout \end_inset </cell> </row> <row> <cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 111111 1111111 111111 111111111 11111 11111 1111 \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 2222 22222 222222 222222222 2222222 22 22222 \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 333333 333333 333333 33333 3333333 333 \end_layout \end_inset </cell> </row> </lyxtabular> \end_inset \end_layout \begin_layout Section 表の調整 \begin_inset Index idx status collapsed \begin_layout Plain Layout ひょうのちょうせい@表の調整 \end_layout \end_inset \begin_inset Index idx status collapsed \begin_layout Plain Layout ひょう@表 ! ちょうせい@調整 \end_layout \end_inset \end_layout \begin_layout Subsection 行の余白取り \begin_inset CommandInset label LatexCommand label name "subsec:行の余白取り" \end_inset \begin_inset Index idx status collapsed \begin_layout Plain Layout ひょうのちょうせい@表の調整 ! ぎょうのよはくどり@行の余白取り \end_layout \end_inset \end_layout \begin_layout Standard 表の設定ダイアログの \family sans 罫線 \family default タブで,表の行に縦方向の余白を加えることができます.ここでは三つのことができます. \end_layout \begin_layout Description 行上 これは表の行の文字上に余白を追加します.もし表がフォーマル様式の表 \begin_inset Foot status collapsed \begin_layout Plain Layout フォーマル様式の表は第 \begin_inset CommandInset ref LatexCommand ref reference "sec:フォーマル様式の表" \end_inset 節で説明されています. \end_layout \end_inset ならば,\SpecialChar LyX は既定値として0.5 \begin_inset space \thinspace{} \end_inset emの余白を挿入します.通常の表の場合には,余白を追加すると,残念ながら以下の表のように縦罫線が破壊されてしまいます. \begin_inset VSpace medskip \end_inset \begin_inset Newline newline \end_inset \begin_inset space \hspace*{} \length 0pt \end_inset \begin_inset space \hfill{} \end_inset \begin_inset Tabular <lyxtabular version="3" rows="3" columns="1"> <features tabularvalignment="middle"> <column alignment="center" valignment="top"> <row> <cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout い \end_layout \end_inset </cell> </row> <row topspace="3mm"> <cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 行上に3 \begin_inset space \thinspace{} \end_inset mmの余白 \end_layout \end_inset </cell> </row> <row> <cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout は \end_layout \end_inset </cell> </row> </lyxtabular> \end_inset \begin_inset space \hfill{} \end_inset \begin_inset space \hspace*{} \length 0pt \end_inset \begin_inset VSpace medskip \end_inset \begin_inset Newline newline \end_inset したがって,通常表の行上に余白を加えるのは,縦罫線がないときのみに使用することができます. \end_layout \begin_layout Description 行下 これは表の行の文字下に余白を追加します.もし表がフォーマル様式の表ならば,\SpecialChar LyX は既定値として0.5 \begin_inset space \thinspace{} \end_inset emの余白を挿入し,通常の表ならば既定値として2 \begin_inset space \thinspace{} \end_inset ptを挿入します. \end_layout \begin_layout Description 行間 これは表の現在行と次の行の間に余白を追加します.もし表がフォーマル様式の表ならば,\SpecialChar LyX は既定値として0.5 \begin_inset space \thinspace{} \end_inset emの余白を挿入します.通常の表の場合には,余白を追加すると,残念ながら以下の表のように縦罫線が破壊されてしまいます. \begin_inset VSpace medskip \end_inset \begin_inset Newline newline \end_inset \begin_inset space \hspace*{} \length 0pt \end_inset \begin_inset space \hfill{} \end_inset \begin_inset Tabular <lyxtabular version="3" rows="3" columns="1"> <features tabularvalignment="middle"> <column alignment="center" valignment="top"> <row> <cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout い \end_layout \end_inset </cell> </row> <row interlinespace="3mm"> <cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \begin_inset Formula $\downarrow$ \end_inset 行間に3 \begin_inset space \thinspace{} \end_inset mmの余白 \begin_inset Formula $\downarrow$ \end_inset \end_layout \end_inset </cell> </row> <row> <cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \begin_inset Formula $\uparrow$ \end_inset 行間に3 \begin_inset space \thinspace{} \end_inset mmの余白 \begin_inset Formula $\uparrow$ \end_inset \end_layout \end_inset </cell> </row> </lyxtabular> \end_inset \begin_inset space \hfill{} \end_inset \begin_inset space \hspace*{} \length 0pt \end_inset \begin_inset VSpace medskip \end_inset \begin_inset Newline newline \end_inset したがって,通常表の行間に余白を加えるのは,縦罫線がないときのみに使用することができます. \end_layout \begin_layout Standard \begin_inset VSpace bigskip \end_inset すべての表の全セルの高さを上げたい場合には,以下の行をプリアンブルに加えることによって実現できます. \end_layout \begin_layout Standard \series bold \backslash @ifundefined{extrarowheight} \begin_inset Newline newline \end_inset \begin_inset Phantom HPhantom status open \begin_layout Plain Layout \begin_inset space ~ \end_inset \end_layout \end_inset { \backslash usepackage{array}}{} \begin_inset Newline newline \end_inset \backslash setlength{ \backslash extrarowheight}{高さ} \series default \begin_inset Note Note status collapsed \begin_layout Plain Layout 自己定義の表書式を用いると,\SpecialChar LyX は自動的に \series bold array \series default パッケージを読み込みます.これが二度読み込まれることを防ぐために,上記のコマンドでは \series bold \backslash @ifundefined \series default が使用されています. \end_layout \end_inset \end_layout \begin_layout Standard というコマンドを書き加えて下さい.ここで「高さ」には,付録 \begin_inset CommandInset ref LatexCommand ref reference "cha:LyXで使用できる単位" \end_inset に挙げられている単位を取ることができます.しかしこの方法は,セル内の文章が縦方向に中央揃えにならないという欠点があります. \end_layout \begin_layout Standard 標準大よりも大きいフォント寸法を使用している場合には,文字が表罫線に近寄りすぎることがよくあります.これは,表の行の最初に\SpecialChar TeX コードで \series bold \backslash strut \series default コマンドを挿入することで補正することができます.表 \begin_inset CommandInset ref LatexCommand ref reference "tab:垂直揃え" \end_inset は,この効果を示したものです. \end_layout \begin_layout Standard \noindent \begin_inset Float table placement h wide false sideways false status open \begin_layout Plain Layout \begin_inset Caption Standard \begin_layout Plain Layout \begin_inset CommandInset label LatexCommand label name "tab:垂直揃え" \end_inset 大きなフォント寸法の文章の垂直揃え \end_layout \end_inset \end_layout \begin_layout Plain Layout \begin_inset space \hfill{} \end_inset \begin_inset Float table wide false sideways false status collapsed \begin_layout Plain Layout \begin_inset Caption Standard \begin_layout Plain Layout 通常の表 \end_layout \end_inset \end_layout \begin_layout Plain Layout \noindent \align center \begin_inset Tabular <lyxtabular version="3" rows="6" columns="1"> <features tabularvalignment="middle"> <column alignment="left" valignment="top"> <row> <cell alignment="left" valignment="top" topline="true" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout ふつう, g \end_layout \end_inset </cell> </row> <row> <cell alignment="left" valignment="top" topline="true" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \size large やや大 \end_layout \end_inset </cell> </row> <row> <cell alignment="left" valignment="top" topline="true" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \size larger 大 \end_layout \end_inset </cell> </row> <row> <cell alignment="left" valignment="top" topline="true" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \size largest 極大 \end_layout \end_inset </cell> </row> <row> <cell alignment="left" valignment="top" topline="true" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \size huge 極々大 \end_layout \end_inset </cell> </row> <row> <cell alignment="left" valignment="top" topline="true" bottomline="true" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \size giant 最大 \end_layout \end_inset </cell> </row> </lyxtabular> \end_inset \end_layout \end_inset \begin_inset space \hfill{} \end_inset \begin_inset Float table wide false sideways false status collapsed \begin_layout Plain Layout \begin_inset Caption Standard \begin_layout Plain Layout \series bold \backslash strut \series default コマンドを使用した表 \end_layout \end_inset \end_layout \begin_layout Plain Layout \noindent \align center \begin_inset Tabular <lyxtabular version="3" rows="6" columns="1"> <features tabularvalignment="middle"> <column alignment="left" valignment="top"> <row> <cell alignment="left" valignment="top" topline="true" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout ふつう, g \end_layout \end_inset </cell> </row> <row> <cell alignment="left" valignment="top" topline="true" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \size large \begin_inset ERT status collapsed \begin_layout Plain Layout \backslash strut \end_layout \end_inset やや大 \end_layout \end_inset </cell> </row> <row> <cell alignment="left" valignment="top" topline="true" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \size larger \begin_inset ERT status collapsed \begin_layout Plain Layout \backslash strut \end_layout \end_inset 大 \end_layout \end_inset </cell> </row> <row> <cell alignment="left" valignment="top" topline="true" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \size largest \begin_inset ERT status collapsed \begin_layout Plain Layout \backslash strut \end_layout \end_inset 極大 \end_layout \end_inset </cell> </row> <row> <cell alignment="left" valignment="top" topline="true" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \size huge \begin_inset ERT status collapsed \begin_layout Plain Layout \backslash strut \end_layout \end_inset 極々大 \end_layout \end_inset </cell> </row> <row> <cell alignment="left" valignment="top" topline="true" bottomline="true" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \size giant \begin_inset ERT status collapsed \begin_layout Plain Layout \backslash strut \end_layout \end_inset 最大 \end_layout \end_inset </cell> </row> </lyxtabular> \end_inset \end_layout \end_inset \begin_inset space \hfill{} \end_inset \end_layout \end_inset \end_layout \begin_layout Subsection 特殊なセル揃え \begin_inset CommandInset label LatexCommand label name "subsec:特殊なセル揃え" \end_inset \begin_inset Index idx status collapsed \begin_layout Plain Layout ひょうのちょうせい@表の調整 ! とくしゅなせるぞろえ@特殊なセル揃え \end_layout \end_inset \end_layout \begin_layout Standard ときには表 \begin_inset CommandInset ref LatexCommand ref reference "tab:表セル" \end_inset の小数点のように,同一列の各セルの内容が,特定の文字で揃えられた方が見栄えの良いことがあります.この揃え方は,当該列にカーソルを置いて,ツールバーボタン \begin_inset Info type "icon" arg "tabular-feature align-decimal" \end_inset を押すか,表設定中で揃えを \family sans 小数点で \family default に設定します. \end_layout \begin_layout Standard \begin_inset Float table placement h wide false sideways false status open \begin_layout Plain Layout \begin_inset Caption Standard \begin_layout Plain Layout \begin_inset CommandInset label LatexCommand label name "tab:表セル" \end_inset 一列が小数点で揃えられた表セル \end_layout \end_inset \end_layout \begin_layout Plain Layout \align center \begin_inset Tabular <lyxtabular version="3" rows="4" columns="1"> <features booktabs="true" tabularvalignment="middle"> <column alignment="decimal" decimal_point="." valignment="top" width="0pt"> <row> <cell alignment="center" valignment="top" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 見出し \end_layout \end_inset </cell> </row> <row> <cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 12.6 \end_layout \end_inset </cell> </row> <row> <cell alignment="center" valignment="top" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 0.68 \end_layout \end_inset </cell> </row> <row> <cell alignment="center" valignment="top" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout -123.0 \end_layout \end_inset </cell> </row> </lyxtabular> \end_inset \end_layout \end_inset \end_layout \begin_layout Standard \begin_inset Float table placement h wide false sideways false status open \begin_layout Plain Layout \begin_inset Caption Standard \begin_layout Plain Layout \begin_inset CommandInset label LatexCommand label name "tab:演算子揃え表" \end_inset 一列が演算子で揃えられた表セル \end_layout \end_inset \end_layout \begin_layout Plain Layout \align center \begin_inset Tabular <lyxtabular version="3" rows="4" columns="2"> <features booktabs="true" tabularvalignment="middle"> <column alignment="right" valignment="top" width="0pt"> <column alignment="left" valignment="top" width="0pt" special="@{}l"> <row> <cell multicolumn="1" alignment="center" valignment="top" bottomline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 見出し \end_layout \end_inset </cell> <cell multicolumn="2" alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \end_layout \end_inset </cell> </row> <row> <cell alignment="center" valignment="top" usebox="none"> \begin_inset Text \begin_layout Plain Layout \begin_inset Formula $12\,+$ \end_inset \end_layout \end_inset </cell> <cell alignment="center" valignment="top" usebox="none"> \begin_inset Text \begin_layout Plain Layout \begin_inset Formula $\,6$ \end_inset \end_layout \end_inset </cell> </row> <row> <cell alignment="center" valignment="top" usebox="none"> \begin_inset Text \begin_layout Plain Layout \begin_inset Formula $0\,-$ \end_inset \end_layout \end_inset </cell> <cell alignment="center" valignment="top" usebox="none"> \begin_inset Text \begin_layout Plain Layout \begin_inset Formula $\,68$ \end_inset \end_layout \end_inset </cell> </row> <row> <cell alignment="center" valignment="top" usebox="none"> \begin_inset Text \begin_layout Plain Layout \begin_inset Formula $-123\,/$ \end_inset \end_layout \end_inset </cell> <cell alignment="center" valignment="top" usebox="none"> \begin_inset Text \begin_layout Plain Layout \begin_inset Formula $\,0$ \end_inset \end_layout \end_inset </cell> </row> </lyxtabular> \end_inset \end_layout \end_inset \end_layout \begin_layout Standard 揃え文字を指定するフィールドには,数式を用いることができないので,この方法を使って,数式中の文字で揃えることはできません.このような場合には,表 \begin_inset CommandInset ref LatexCommand ref reference "tab:演算子揃え表" \end_inset のような方法を用いる必要があります.この表は,4 \begin_inset Formula $\times$ \end_inset 2表として作成されており,見出しは中央揃え連結列です.第1列には,右揃えで演算子を含む前半部を収め,第2列には,左揃えで残りを収めます.演算子の周りに通常加えら れる空白を得るために,第2列の各セルの冒頭には,小空白が加えられています.通常,表の列間に加えられる余白を削るために, \end_layout \begin_layout Standard \series bold @{}l \end_layout \begin_layout Standard という\SpecialChar LaTeX 引数を第2列に指定します. \end_layout \begin_layout Standard 表 \begin_inset CommandInset ref LatexCommand ref reference "tab:表セル揃え" \end_inset は,揃え方の例をいくつか示しています.関係子で揃えるために,表 \begin_inset CommandInset ref LatexCommand ref reference "tab:演算子揃え表" \end_inset の冒頭には,小空白が加えられています. \end_layout \begin_layout Standard \begin_inset Float table wide false sideways false status open \begin_layout Plain Layout \begin_inset Caption Standard \begin_layout Plain Layout \begin_inset CommandInset label LatexCommand label name "tab:表セル揃え" \end_inset 表セルの揃えの例 \end_layout \end_inset \end_layout \begin_layout Plain Layout \align center \begin_inset Tabular <lyxtabular version="3" rows="4" columns="6"> <features tabularvalignment="middle"> <column alignment="right" valignment="top"> <column alignment="left" valignment="top" special="@{}l"> <column alignment="right" valignment="top"> <column alignment="left" valignment="top" special="@{}l"> <column alignment="right" valignment="top"> <column alignment="left" valignment="top" special="@{}l"> <row> <cell multicolumn="1" alignment="center" valignment="top" bottomline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 単位 \end_layout \end_inset </cell> <cell multicolumn="2" alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \end_layout \end_inset </cell> <cell multicolumn="1" alignment="center" valignment="top" bottomline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 冪数 \end_layout \end_inset </cell> <cell multicolumn="2" alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \end_layout \end_inset </cell> <cell multicolumn="1" alignment="center" valignment="top" bottomline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 関係子 \end_layout \end_inset </cell> <cell multicolumn="2" alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \end_layout \end_inset </cell> </row> <row> <cell alignment="center" valignment="top" usebox="none"> \begin_inset Text \begin_layout Plain Layout 12 \begin_inset Formula $\times$ \end_inset \end_layout \end_inset </cell> <cell alignment="center" valignment="top" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 24本の瓶 \end_layout \end_inset </cell> <cell alignment="center" valignment="top" usebox="none"> \begin_inset Text \begin_layout Plain Layout \begin_inset Formula $10\cdot$ \end_inset \end_layout \end_inset </cell> <cell alignment="center" valignment="top" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \begin_inset Formula $10^{\mbox{-}17}$ \end_inset \end_layout \end_inset </cell> <cell alignment="center" valignment="top" usebox="none"> \begin_inset Text \begin_layout Plain Layout \begin_inset Formula $\Gamma(t)\propto$ \end_inset \end_layout \end_inset </cell> <cell alignment="center" valignment="top" usebox="none"> \begin_inset Text \begin_layout Plain Layout \begin_inset Formula $\:\Upsilon(t)$ \end_inset \end_layout \end_inset </cell> </row> <row> <cell alignment="center" valignment="top" usebox="none"> \begin_inset Text \begin_layout Plain Layout 1024 \begin_inset Formula $\times$ \end_inset \end_layout \end_inset </cell> <cell alignment="center" valignment="top" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 768ピクセル \end_layout \end_inset </cell> <cell alignment="center" valignment="top" usebox="none"> \begin_inset Text \begin_layout Plain Layout \begin_inset Formula $5.78\cdot$ \end_inset \end_layout \end_inset </cell> <cell alignment="center" valignment="top" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \begin_inset Formula $10^{7}$ \end_inset \end_layout \end_inset </cell> <cell alignment="center" valignment="top" usebox="none"> \begin_inset Text \begin_layout Plain Layout \begin_inset Formula $A\ne$ \end_inset \end_layout \end_inset </cell> <cell alignment="center" valignment="top" usebox="none"> \begin_inset Text \begin_layout Plain Layout \begin_inset Formula $\:B_{\mathrm{red}}$ \end_inset \end_layout \end_inset </cell> </row> <row> <cell alignment="center" valignment="top" usebox="none"> \begin_inset Text \begin_layout Plain Layout 32 \begin_inset Formula $\times$ \end_inset \end_layout \end_inset </cell> <cell alignment="center" valignment="top" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 6 \begin_inset space \thinspace{} \end_inset cm \end_layout \end_inset </cell> <cell alignment="center" valignment="top" usebox="none"> \begin_inset Text \begin_layout Plain Layout - \begin_inset Formula $33.5\cdot$ \end_inset \end_layout \end_inset </cell> <cell alignment="center" valignment="top" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \begin_inset Formula $10^{4}$ \end_inset \end_layout \end_inset </cell> <cell alignment="center" valignment="top" usebox="none"> \begin_inset Text \begin_layout Plain Layout \begin_inset Formula $\sin(\alpha)\ge$ \end_inset \end_layout \end_inset </cell> <cell alignment="center" valignment="top" usebox="none"> \begin_inset Text \begin_layout Plain Layout \begin_inset Formula $\:\sin(\beta)$ \end_inset \end_layout \end_inset </cell> </row> </lyxtabular> \end_inset \end_layout \end_inset \end_layout \begin_layout Subsection 自製のセル書式および列書式 \begin_inset CommandInset label LatexCommand label name "subsec:自製書式" \end_inset \begin_inset Index idx status collapsed \begin_layout Plain Layout ひょうのちょうせい@表の調整 ! せるとれつのしょしき@セルと列の書式 \end_layout \end_inset \end_layout \begin_layout Standard 第 \begin_inset CommandInset ref LatexCommand ref reference "sec:表幅の計算" \end_inset 節のようにして通常列の必要幅を計算したり,第 \begin_inset CommandInset ref LatexCommand ref reference "subsec:連結列の計算" \end_inset 節のように連結列の必要幅を計算したりするのは,計算の必要な表が複数あるときには,とても大変です.そこで楽をするために,プリアンブルでセル・列書式を定義してしまえ ば,それを文書中のすべての表で使うことができます.書式は,以下のように定義します. \end_layout \begin_layout Standard \series bold \backslash newcolumntype{書式名}[引数の数]{コマンド} \end_layout \begin_layout Standard 書式名は,一文字だけでも構いません. \emph on b \emph default ・ \emph on c \emph default ・ \emph on l \emph default ・ \emph on m \emph default ・ \emph on p \emph default ・ \emph on r \emph default の文字は定義済みですので使用することができませんが,これらの文字の大文字は使用可能です. \end_layout \begin_layout Standard \begin_inset VSpace medskip \end_inset \end_layout \begin_layout Standard 固定幅の縦横中央揃えの連結列セルの場合は,以下のセル書式を定義するとよいでしょう. \end_layout \begin_layout Standard \series bold \backslash newcolumntype{M}[1]{>{ \backslash centering \backslash hspace{0pt}}m{#1}} \end_layout \begin_layout Standard ここで \series bold \backslash hspace{0pt} \series default は,第 \begin_inset CommandInset ref LatexCommand ref reference "subsec:複数行" \end_inset 節で述べたように,最初の単語がハイフネートされる問題を回避するためのものです.すると連結列を作成する際には,表ダイアログの \family sans \SpecialChar LaTeX の引数 \family default で \end_layout \begin_layout Standard \series bold M{width} \end_layout \begin_layout Standard と入力するだけですみます. \end_layout \begin_layout Standard \begin_inset VSpace bigskip \end_inset \end_layout \begin_layout Standard 連結列セルにまたがられる各セルについては,以下の書式を定義するとよいでしょう. \end_layout \begin_layout Standard \series bold \backslash newcolumntype{S}[2]{>{ \backslash centering \backslash hspace{0pt}} \begin_inset Newline newline \end_inset \begin_inset Phantom HPhantom status open \begin_layout Plain Layout \series bold \backslash newcolumntype \end_layout \end_inset m{(#1+(2 \backslash tabcolsep+ \backslash arrayrulewidth)*(1-#2))/#2}} \end_layout \begin_layout Standard この書式は,またがられる各セルが同じ幅になる幅を計算するのに,第 \begin_inset CommandInset ref LatexCommand eqref reference "eq:Wgn" \end_inset 式を使用しています. \end_layout \begin_layout Standard こうしておけば,当該セルの\SpecialChar LaTeX 引数に \end_layout \begin_layout Standard \series bold S{連結列セルの幅}{連結列セルがまたがる列の数} \end_layout \begin_layout Standard と入力するだけですみます. \end_layout \begin_layout Standard \begin_inset VSpace bigskip \end_inset \end_layout \begin_layout Standard 色付き列については,以下のように定義するとよいでしょう. \end_layout \begin_layout Standard \series bold \backslash newcolumntype{K}[1]{>{ \backslash columncolor{#1} \backslash hspace{0pt}}c} \end_layout \begin_layout Standard 最後の「c」は,文字列が水平方向中央揃えになった可変幅の列を生成します.こうしておいて,\SpecialChar LaTeX 引数に \end_layout \begin_layout Standard \series bold K{色名} \end_layout \begin_layout Standard と入力します. \end_layout \begin_layout Standard \begin_inset VSpace bigskip \end_inset \end_layout \begin_layout Standard 表 \begin_inset CommandInset ref LatexCommand ref reference "tab:ユーザー定義の表書式" \end_inset を生成するには,第1列と連結列に\SpecialChar LaTeX 引数として \end_layout \begin_layout Standard \series bold M{2.5cm} \end_layout \begin_layout Standard を指定し,最終列に \end_layout \begin_layout Standard \series bold K{red} \end_layout \begin_layout Standard そして第2列の各セルに \end_layout \begin_layout Standard \series bold S{2.5cm}{2} \end_layout \begin_layout Standard と指定します. \end_layout \begin_layout Standard \begin_inset Float table placement h wide false sideways false status open \begin_layout Plain Layout \begin_inset Caption Standard \begin_layout Plain Layout \begin_inset CommandInset label LatexCommand label name "tab:ユーザー定義の表書式" \end_inset ユーザー定義の表書式を使用した表 \end_layout \end_inset \end_layout \begin_layout Plain Layout \align center \begin_inset Tabular <lyxtabular version="3" rows="3" columns="4"> <features tabularvalignment="middle"> <column alignment="center" valignment="middle" width="2.5cm" special="M{2.5cm}"> <column alignment="center" valignment="middle" special="S{2.5cm}{2}"> <column alignment="center" valignment="middle"> <column alignment="center" valignment="middle" special="K{red}"> <row> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout とても長い表セル中の単語 \end_layout \end_inset </cell> <cell multicolumn="1" alignment="center" valignment="top" topline="true" leftline="true" usebox="none" special="M{2.5cm}"> \begin_inset Text \begin_layout Plain Layout 複数行の連結列 \end_layout \end_inset </cell> <cell multicolumn="2" alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout は \end_layout \end_inset </cell> </row> <row> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout に \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout ほ \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout へ \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout と \end_layout \end_inset </cell> </row> <row> <cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout ち \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout り \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout ぬ \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout る \end_layout \end_inset </cell> </row> </lyxtabular> \end_inset \end_layout \end_inset \end_layout \begin_layout Subsection 罫線幅 \begin_inset CommandInset label LatexCommand label name "subsec:罫線幅" \end_inset \begin_inset Index idx status collapsed \begin_layout Plain Layout ひょうのちょうせい@表の調整 ! けいせんはば@罫線幅 \end_layout \end_inset \end_layout \begin_layout Standard 表中のすべての罫線の罫線幅を調整するには,長さ \series bold \backslash arrayrulewidth \series default を使用します.たとえば,表 \begin_inset CommandInset ref LatexCommand ref reference "tab:Table-with-1.5" \end_inset のように罫線幅を1.5 \begin_inset space \thinspace{} \end_inset ptにするには,表や表フロートの前に\SpecialChar TeX コードで \end_layout \begin_layout Standard \series bold \backslash setlength{ \backslash arrayrulewidth}{1.5pt} \end_layout \begin_layout Standard というコマンドを挿入します.こうして変更した罫線幅は,これ以降のすべての表に適用されます.ふたたび既定値を使用するには,表か表フロートの前に\SpecialChar TeX コードで \series bold \backslash arrayrulewidth \series default を0.4 \begin_inset space \thinspace{} \end_inset ptに設定してください. \end_layout \begin_layout Standard \begin_inset ERT status collapsed \begin_layout Plain Layout \backslash setlength{ \backslash arrayrulewidth}{1.5pt} \end_layout \end_inset \begin_inset Float table wide false sideways false status open \begin_layout Plain Layout \begin_inset Caption Standard \begin_layout Plain Layout \begin_inset CommandInset label LatexCommand label name "tab:Table-with-1.5" \end_inset 1.5 \begin_inset space \thinspace{} \end_inset pt幅罫線の表 \end_layout \end_inset \end_layout \begin_layout Plain Layout \align center \begin_inset Tabular <lyxtabular version="3" rows="3" columns="3"> <features tabularvalignment="middle"> <column alignment="center" valignment="top"> <column alignment="center" valignment="top"> <column alignment="center" valignment="top"> <row> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout sd \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \end_layout \end_inset </cell> </row> <row> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout sd \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \end_layout \end_inset </cell> </row> <row> <cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout sd \end_layout \end_inset </cell> </row> </lyxtabular> \end_inset \end_layout \end_inset \begin_inset ERT status collapsed \begin_layout Plain Layout \backslash setlength{ \backslash arrayrulewidth}{0.4pt} \end_layout \end_inset \end_layout \begin_layout Standard \begin_inset VSpace bigskip \end_inset 表 \begin_inset CommandInset ref LatexCommand ref reference "tab:1.5pt幅横罫" \end_inset のように横罫だけを1.5 \begin_inset space \thinspace{} \end_inset pt幅にするには,表または表フロートの前に\SpecialChar TeX コードとして以下のコマンドを挿入してください. \end_layout \begin_layout Standard \series bold \backslash let \backslash myHline \backslash hline \begin_inset Newline newline \end_inset \backslash renewcommand{ \backslash hline} \begin_inset Newline newline \end_inset { \backslash noalign{ \backslash global \backslash arrayrulewidth 1.5pt} \begin_inset Newline newline \end_inset \backslash myHline \backslash noalign{ \backslash global \backslash arrayrulewidth 0.4pt}} \end_layout \begin_layout Standard 既定幅に戻すには,表または表フロートの後に\SpecialChar TeX コードとして以下のコマンドを挿入します. \end_layout \begin_layout Standard \series bold \backslash renewcommand{ \backslash hline}{ \backslash myHline} \end_layout \begin_layout Standard \begin_inset ERT status collapsed \begin_layout Plain Layout \backslash let \backslash myHline \backslash hline \end_layout \begin_layout Plain Layout \backslash renewcommand{ \backslash hline} \end_layout \begin_layout Plain Layout { \backslash noalign{ \backslash global \backslash arrayrulewidth 1.5pt} \end_layout \begin_layout Plain Layout \backslash myHline \backslash noalign{ \backslash global \backslash arrayrulewidth 0.4pt}} \end_layout \end_inset \begin_inset Float table wide false sideways false status open \begin_layout Plain Layout \begin_inset Caption Standard \begin_layout Plain Layout \begin_inset CommandInset label LatexCommand label name "tab:1.5pt幅横罫" \end_inset 1.5 \begin_inset space \thinspace{} \end_inset pt幅横罫の表 \end_layout \end_inset \end_layout \begin_layout Plain Layout \align center \begin_inset Tabular <lyxtabular version="3" rows="3" columns="3"> <features tabularvalignment="middle"> <column alignment="center" valignment="top"> <column alignment="center" valignment="top"> <column alignment="center" valignment="top"> <row> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout sd \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \end_layout \end_inset </cell> </row> <row> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout sd \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \end_layout \end_inset </cell> </row> <row> <cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout sd \end_layout \end_inset </cell> </row> </lyxtabular> \end_inset \end_layout \end_inset \begin_inset ERT status collapsed \begin_layout Plain Layout \backslash renewcommand{ \backslash hline}{ \backslash myHline} \end_layout \end_inset \end_layout \begin_layout Standard \begin_inset VSpace bigskip \end_inset 縦罫だけを1.5 \begin_inset space \thinspace{} \end_inset pt幅にするには,第 \begin_inset CommandInset ref LatexCommand ref reference "subsec:自製書式" \end_inset 節の説明にしたがって,文書プリアンブルに以下のような列書式を作成してください. \end_layout \begin_layout Standard \series bold \backslash newcolumntype{V}{!{ \backslash vrule width 1.5pt}} \end_layout \begin_layout Standard 表 \begin_inset CommandInset ref LatexCommand ref reference "tab:1.5pt幅縦罫" \end_inset を作るには,最右列に\SpecialChar LaTeX 引数 \end_layout \begin_layout Standard \series bold VcV \end_layout \begin_layout Standard を指定し,他の列には \end_layout \begin_layout Standard \series bold Vc \end_layout \begin_layout Standard を指定します. \end_layout \begin_layout Standard \begin_inset Float table wide false sideways false status open \begin_layout Plain Layout \begin_inset Caption Standard \begin_layout Plain Layout \begin_inset CommandInset label LatexCommand label name "tab:1.5pt幅縦罫" \end_inset 1.5 \begin_inset space \thinspace{} \end_inset pt幅縦罫の表 \end_layout \end_inset \end_layout \begin_layout Plain Layout \align center \begin_inset Tabular <lyxtabular version="3" rows="3" columns="3"> <features tabularvalignment="middle"> <column alignment="center" valignment="top" special="Vc"> <column alignment="center" valignment="top" special="Vc"> <column alignment="center" valignment="top" special="VcV"> <row> <cell alignment="center" valignment="top" topline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout sd \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \end_layout \end_inset </cell> </row> <row> <cell alignment="center" valignment="top" topline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout sd \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \end_layout \end_inset </cell> </row> <row> <cell alignment="center" valignment="top" topline="true" bottomline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" bottomline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" bottomline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout sd \end_layout \end_inset </cell> </row> </lyxtabular> \end_inset \end_layout \end_inset \end_layout \begin_layout Subsection 点罫 \begin_inset Index idx status collapsed \begin_layout Plain Layout ひょうのちょうせい@表の調整 ! てんけい@点罫 \end_layout \end_inset \end_layout \begin_layout Standard \begin_inset ERT status collapsed \begin_layout Plain Layout \backslash ifarydshln \end_layout \end_inset \begin_inset Note Note status open \begin_layout Plain Layout この節は,\SpecialChar LaTeX パッケージ \series bold arydshln \series default が導入済みの時のみ表示されます. \end_layout \end_inset \end_layout \begin_layout Standard \begin_inset Float table placement H wide false sideways false status open \begin_layout Plain Layout \begin_inset Caption Standard \begin_layout Plain Layout \begin_inset CommandInset label LatexCommand label name "tab:点罫表" \end_inset 点罫を使用した表 \end_layout \end_inset \end_layout \begin_layout Plain Layout \align center \begin_inset Tabular <lyxtabular version="3" rows="5" columns="5"> <features tabularvalignment="middle"> <column alignment="center" valignment="top"> <column alignment="center" valignment="top"> <column alignment="center" valignment="top" special=":c"> <column alignment="center" valignment="top"> <column alignment="center" valignment="top"> <row> <cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout い \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout ろ \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" bottomline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout は \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout に \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout ほ \end_layout \end_inset </cell> </row> <row> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout へ \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout と \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout ち \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout り \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout ぬ \end_layout \end_inset </cell> </row> <row> <cell alignment="center" valignment="top" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \begin_inset ERT status collapsed \begin_layout Plain Layout \backslash hdashline \end_layout \end_inset る \end_layout \end_inset </cell> <cell alignment="center" valignment="top" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout を \end_layout \end_inset </cell> <cell alignment="center" valignment="top" usebox="none"> \begin_inset Text \begin_layout Plain Layout わ \end_layout \end_inset </cell> <cell alignment="center" valignment="top" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout か \end_layout \end_inset </cell> <cell alignment="center" valignment="top" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout よ \end_layout \end_inset </cell> </row> <row> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \begin_inset ERT status collapsed \begin_layout Plain Layout \backslash cdashline{4-5} \end_layout \end_inset た \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout れ \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" usebox="none" special="c:"> \begin_inset Text \begin_layout Plain Layout そ \end_layout \end_inset </cell> <cell multicolumn="1" alignment="center" valignment="top" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout ち \end_layout \end_inset </cell> <cell multicolumn="2" alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \end_layout \end_inset </cell> </row> <row> <cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout り \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout な \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" bottomline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout ら \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout む \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout う \end_layout \end_inset </cell> </row> </lyxtabular> \end_inset \end_layout \end_inset \end_layout \begin_layout Standard \SpecialChar LyX は点罫を自前ではサポートしません.そこで\SpecialChar TeX コードを使用する必要があります.必須要件として,文書プリアンブル中に \end_layout \begin_layout Standard \series bold \backslash usepackage{arydshln} \end_layout \begin_layout Standard というコマンドを書き,\SpecialChar LaTeX パッケージの \series bold arydshln \series default \begin_inset Index idx status collapsed \begin_layout Plain Layout \SpecialChar LaTeX ぱっけーじ@\SpecialChar LaTeX パッケージ ! arydshln \end_layout \end_inset を読み込んでおく必要があります.縦罫を点罫にするには,表セルダイアログの\SpecialChar LaTeX 変数として,水平揃え用の文字とともにコロン「:」を入力してください. \end_layout \begin_layout Standard 横点罫を得るには,表中当該行の最初のセルの冒頭に,\SpecialChar TeX コードで \end_layout \begin_layout Standard \series bold \backslash hdashline \end_layout \begin_layout Standard というコマンドを加えてください. \end_layout \begin_layout Standard 連結列に点罫を書くには,表中当該行の最初のセルの冒頭に,\SpecialChar TeX コードで \end_layout \begin_layout Standard \series bold \backslash cdashline{列番号 \series default } \end_layout \begin_layout Standard なるコマンドを使用してください.たとえば,第2列から第4列にわたる連結列があって,その上に点罫が欲しい場合には,連結列のある行の最初のセルの冒頭に \end_layout \begin_layout Standard \series bold \backslash cdashline{2-4} \end_layout \begin_layout Standard なるコマンドを置いてください. \end_layout \begin_layout Standard \begin_inset VSpace bigskip \end_inset \end_layout \begin_layout Standard 表 \begin_inset CommandInset ref LatexCommand ref reference "tab:点罫表" \end_inset は,第3列の\SpecialChar LaTeX 変数に「:c」を指定して作られています.第3行の最初のセルには,\SpecialChar TeX コードのコマンド \series bold \backslash hdashline \series default が挿れられており,第4行の最初のセルには,\SpecialChar TeX コードのコマンド \begin_inset Newline newline \end_inset \series bold \backslash cdashline{4-5} \series default が挿れられています. \end_layout \begin_layout Standard \begin_inset VSpace bigskip \end_inset \end_layout \begin_layout Standard 点罫を持つ表も,表 \begin_inset CommandInset ref LatexCommand ref reference "tab:Colored-table-with" \end_inset のように色付けをすることができます. \end_layout \begin_layout Standard \begin_inset ERT status collapsed \begin_layout Plain Layout \backslash setlength{ \backslash arrayrulewidth}{1pt} \end_layout \end_inset \begin_inset Note Note status collapsed \begin_layout Plain Layout 罫線色が見易いように線を太く \end_layout \end_inset \end_layout \begin_layout Standard \begin_inset ERT status collapsed \begin_layout Plain Layout \backslash dashgapcolor{green} \end_layout \end_inset \begin_inset Note Note status collapsed \begin_layout Plain Layout 緑点罫の間の色付き余白 \end_layout \end_inset \end_layout \begin_layout Standard \begin_inset ERT status collapsed \begin_layout Plain Layout \backslash let \backslash myHdashline \backslash hdashline \end_layout \begin_layout Plain Layout \backslash renewcommand{ \backslash hdashline} \end_layout \begin_layout Plain Layout { \backslash arrayrulecolor{red} \backslash myHdashline \backslash arrayrulecolor{black}} \end_layout \end_inset \begin_inset Note Note status collapsed \begin_layout Plain Layout 色付き水平線・点罫赤 \end_layout \end_inset \end_layout \begin_layout Standard \begin_inset ERT status collapsed \begin_layout Plain Layout \backslash let \backslash myCdashline \backslash cdashline \end_layout \begin_layout Plain Layout \backslash renewcommand{ \backslash cdashline}[1] \end_layout \begin_layout Plain Layout { \backslash arrayrulecolor{yellow} \backslash myCdashline{#1} \backslash arrayrulecolor{black}} \end_layout \end_inset \begin_inset Note Note status collapsed \begin_layout Plain Layout 色付き部分水平線・点罫黄色 \end_layout \end_inset \end_layout \begin_layout Standard \begin_inset Float table placement h wide false sideways false status open \begin_layout Plain Layout \begin_inset Caption Standard \begin_layout Plain Layout \begin_inset CommandInset label LatexCommand label name "tab:Colored-table-with" \end_inset 点罫線の色付き表 \end_layout \end_inset \end_layout \begin_layout Plain Layout \align center \begin_inset Tabular <lyxtabular version="3" rows="5" columns="5"> <features tabularvalignment="middle"> <column alignment="center" valignment="top" width="0pt" special=">{\columncolor{darkgreen}\centering}c"> <column alignment="center" valignment="top" width="0pt"> <column alignment="center" valignment="top" width="0pt" special=":c"> <column alignment="center" valignment="top"> <column alignment="center" valignment="top"> <row> <cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout い \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout ろ \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout は \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout に \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout ほ \end_layout \end_inset </cell> </row> <row> <cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout へ \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout と \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout ち \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout り \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout ぬ \end_layout \end_inset </cell> </row> <row> <cell alignment="center" valignment="top" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \begin_inset ERT status collapsed \begin_layout Plain Layout \backslash hdashline \end_layout \end_inset \begin_inset ERT status collapsed \begin_layout Plain Layout \backslash rowcolor{Gray} \end_layout \end_inset る \end_layout \end_inset </cell> <cell alignment="center" valignment="top" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout を \end_layout \end_inset </cell> <cell alignment="center" valignment="top" usebox="none"> \begin_inset Text \begin_layout Plain Layout わ \end_layout \end_inset </cell> <cell alignment="center" valignment="top" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout か \end_layout \end_inset </cell> <cell alignment="center" valignment="top" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout よ \end_layout \end_inset </cell> </row> <row> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \begin_inset ERT status collapsed \begin_layout Plain Layout \backslash cdashline{4-5} \end_layout \end_inset た \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout れ \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" usebox="none" special="c:"> \begin_inset Text \begin_layout Plain Layout そ \end_layout \end_inset </cell> <cell multicolumn="1" alignment="center" valignment="top" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout つ \end_layout \end_inset </cell> <cell multicolumn="2" alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \end_layout \end_inset </cell> </row> <row> <cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout ね \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout な \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" bottomline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout ら \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout む \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \begin_inset ERT status collapsed \begin_layout Plain Layout \backslash cellcolor{Maroon} \end_layout \end_inset う \end_layout \end_inset </cell> </row> </lyxtabular> \end_inset \end_layout \end_inset \end_layout \begin_layout Standard \begin_inset ERT status collapsed \begin_layout Plain Layout \backslash renewcommand{ \backslash hdashline}{ \backslash myHdashline} \end_layout \end_inset \begin_inset Note Note status collapsed \begin_layout Plain Layout 既定値に戻す \end_layout \end_inset \end_layout \begin_layout Standard \begin_inset ERT status collapsed \begin_layout Plain Layout \backslash renewcommand{ \backslash cdashline}{ \backslash myCdashline} \end_layout \end_inset \begin_inset Note Note status collapsed \begin_layout Plain Layout 既定値に戻す \end_layout \end_inset \end_layout \begin_layout Standard \begin_inset ERT status collapsed \begin_layout Plain Layout \backslash nodashgapcolor \end_layout \end_inset \begin_inset Note Note status collapsed \begin_layout Plain Layout 既定値に戻す \end_layout \end_inset \end_layout \begin_layout Standard \begin_inset ERT status collapsed \begin_layout Plain Layout \backslash setlength{ \backslash arrayrulewidth}{0.4pt} \end_layout \end_inset \begin_inset Note Note status collapsed \begin_layout Plain Layout 既定値に戻す \end_layout \end_inset \end_layout \begin_layout Standard 行や列,罫線の着色は,第 \begin_inset CommandInset ref LatexCommand ref reference "sec:色付きの表" \end_inset 節に述べられているように動作します.水平線の着色も, \series bold \backslash myHlineC \series default コマンドを \series bold \backslash myHdashline \series default に置き換え, \series bold \backslash hline \series default を \series bold \backslash hdashline \series default に置き換えれば,そこで述べられているのと同様に機能します.したがって,以下のようなコマンドを使います. \end_layout \begin_layout Standard \series bold \backslash let \backslash myHdashline \backslash hdashline \begin_inset Newline newline \end_inset \backslash renewcommand{ \backslash hdashline} \begin_inset Newline newline \end_inset \begin_inset Phantom HPhantom status open \begin_layout Plain Layout \begin_inset space ~ \end_inset \end_layout \end_inset { \backslash arrayrulecolor{red} \backslash myHdashline \backslash arrayrulecolor{black}} \end_layout \begin_layout Standard \series bold \backslash cdashline \series default に色をつけるならば,コマンドは \end_layout \begin_layout Standard \series bold \backslash let \backslash myCdashline \backslash cdashline \begin_inset Newline newline \end_inset \backslash renewcommand{ \backslash cdashline}[1] \begin_inset Newline newline \end_inset \begin_inset Phantom HPhantom status open \begin_layout Plain Layout \begin_inset space ~ \end_inset \end_layout \end_inset { \backslash arrayrulecolor{red} \backslash myCdashline{#1} \backslash arrayrulecolor{black}} \end_layout \begin_layout Standard のようになります.黒の罫線に戻すには,以下のコマンドを表の後ろに\SpecialChar TeX コードで挿入する必要があります. \end_layout \begin_layout Standard \series bold \backslash hdashline \series default の場合は \end_layout \begin_layout Standard \series bold \backslash renewcommand{ \backslash hdashline}{ \backslash myHdashline} \end_layout \begin_layout Standard とし, \series bold \backslash cdashline \series default の場合は \end_layout \begin_layout Standard \series bold \backslash renewcommand{ \backslash cdashline}{ \backslash myCdashline} \end_layout \begin_layout Standard としてください.点線の間の余白に色をつけるには,表の前に\SpecialChar TeX コードで \end_layout \begin_layout Standard \series bold \backslash dashgapcolor{色} \end_layout \begin_layout Standard とすれば良いです.ここで「色」は,定義済みの色名です. \end_layout \begin_layout Standard \series bold \backslash nodashgapcolor \end_layout \begin_layout Standard というコマンドは, \series bold \backslash dashgapcolor \series default が行った変更を元に戻します. \end_layout \begin_layout Standard \begin_inset Note Greyedout status open \begin_layout Plain Layout \series bold 【註】 \series default 1つのセル中に複数のコマンドがある場合, \series bold arydshln \series default のコマンドが,そのセル中で最初に来る必要があります.したがって,表 \begin_inset CommandInset ref LatexCommand ref reference "tab:Colored-table-with" \end_inset のセル \emph on k \emph default では, \series bold \backslash hdashline \series default コマンドが \series bold \backslash rowcolor \series default の前に来ています. \end_layout \end_inset \end_layout \begin_layout Standard \begin_inset Note Greyedout status open \begin_layout Plain Layout \series bold 【註】 \series default \SpecialChar LaTeX パッケージ \series bold arydshln \series default は,文書プリアンブル中で\SpecialChar LaTeX パッケージ \series bold colortbl \series default \begin_inset Index idx status collapsed \begin_layout Plain Layout \SpecialChar LaTeX ぱっけーじ@\SpecialChar LaTeX パッケージ ! colortbl \end_layout \end_inset よりも前に読み込まれている必要があります. \end_layout \end_inset \end_layout \begin_layout Standard \begin_inset ERT status collapsed \begin_layout Plain Layout \backslash else \end_layout \end_inset \begin_inset Note Note status open \begin_layout Plain Layout 以下は,\SpecialChar LaTeX パッケージ \series bold arydshln \series default が導入済みでないときに表示されます. \end_layout \end_inset \end_layout \begin_layout Standard 本節の内容を出力に表示するためには, \series bold arydshln \series default パッケージを導入しなくてはなりません. \end_layout \begin_layout Standard \begin_inset ERT status collapsed \begin_layout Plain Layout \backslash fi \end_layout \end_inset \end_layout \begin_layout Standard 点罫について詳しい情報は, \series bold arydshln \series default の取扱説明書 \begin_inset CommandInset citation LatexCommand cite key "arydshln" literal "true" \end_inset をご覧ください. \end_layout \begin_layout Chapter フロート \begin_inset CommandInset label LatexCommand label name "chap:フロート" \end_inset \begin_inset Index idx status collapsed \begin_layout Plain Layout ふろーと@フロート \end_layout \end_inset \end_layout \begin_layout Section はじめに \begin_inset CommandInset label LatexCommand label name "sec:フロートはじめに" \end_inset \begin_inset Index idx status collapsed \begin_layout Plain Layout ふろーと@フロート ! はじめに \end_layout \end_inset \end_layout \begin_layout Standard フロートは,何かしらのラベルに関連付けられた文章の塊で,固定された居場所を持ちません.フロートはもっとも適した場所を求めて,1頁ないし2頁,前後にただよう(フロ ート)ことができます. \family sans 脚註 \family default や \family sans 傍註 \family default も,当該ページに註が多すぎる場合には次頁にただよって行きますので,フロートの一種です. \end_layout \begin_layout Standard フロートを使うと,質の良いレイアウトを組むことができます.図表が均等に各ページに割り当てられるので,文章のない空白やページが出ることを避けることができるためです .このようなフローティングは,文章と図表のあいだの連関を破壊してしまうことがあるので,各フロートは文中から参照することができるようになっています.このため,フロ ートには連番が割り当てられます.参照については,第 \begin_inset CommandInset ref LatexCommand ref reference "sec:フロートの参照" \end_inset 節で述べられています. \end_layout \begin_layout Standard フロートを挿入するには, \family sans 挿入\SpecialChar menuseparator フロート \family default メニュー( \begin_inset Info type "icon" arg "float-insert figure" \end_inset または \begin_inset Info type "icon" arg "float-insert table" \end_inset ツールバーボタン)を使えば,ラベルのついたボックスすなわち \family sans キャプション \family default 差込枠が挿入されます.このラベルは,出力の際に自動的に文書言語に翻訳されます.ラベルの後ろには,キャプションの文章を入れ,画像ないし表は,フロート中,キャプショ ンの上ないし下に別の段落として挿入します.キャプションの配置に関して詳しくは,第 \begin_inset CommandInset ref LatexCommand ref reference "sec:キャプションの配置" \end_inset 節に述べられています.また,\SpecialChar LyX 文書を読みやすくするために,ボックスラベルを左クリックすれば,フロートボックスを広げたり畳んだりすることができるようになっています. 畳んだフロートボックスは, \begin_inset Graphics filename clipart/float.png scale 95 scaleBeforeRotation \end_inset のように,灰色ボタンに赤字ラベルで表示されます. \end_layout \begin_layout Standard 周囲の文章に特殊な整形がなされているときには\SpecialChar LaTeX エラーが発生し得るので,これを避けるために,フロートは独立した段落として挿入することをお勧めします. \end_layout \begin_layout Standard 既存の図表は,選択した後に新規フロートのツールバーボタンを押せば,フロート中の図表にすることができます. \end_layout \begin_layout Section フロート型 \end_layout \begin_layout Standard \SpecialChar LyX には,第 \begin_inset CommandInset ref LatexCommand ref reference "sec:図フロート" \end_inset 節および第 \begin_inset CommandInset ref LatexCommand ref reference "sec:表フロート" \end_inset 節で各々説明されている図フロートと表フロート以外に, \family sans アルゴリズム型 \series bold と \series default 折返し型 \family default のフロート型があります.後者は,第 \begin_inset CommandInset ref LatexCommand ref reference "sec:折返しフロート" \end_inset 節に説明があります. \end_layout \begin_layout Subsection アルゴリズムフロート \begin_inset Index idx status collapsed \begin_layout Plain Layout ふろーと@フロート ! あるごりずむ@アルゴリズム \end_layout \end_inset \end_layout \begin_layout Standard \begin_inset Float algorithm placement h wide false sideways false status open \begin_layout Plain Layout \begin_inset Caption Standard \begin_layout Plain Layout \begin_inset CommandInset label LatexCommand label name "alg:アルゴリズムフロートの例" \end_inset アルゴリズムフロートの例 \end_layout \end_inset \end_layout \begin_layout LyX-Code for I in 1..N loop \begin_inset Newline newline \end_inset Sum:= Sum + A(I); /*comment*/ \begin_inset Newline newline \end_inset end loop \begin_inset VSpace -4mm \end_inset \end_layout \end_inset \end_layout \begin_layout Standard このフロート型は, \family sans 挿入 \shape up \SpecialChar menuseparator フロート\SpecialChar menuseparator アルゴリズム \family default \shape default メニューを使うと挿入することができます.これは,プログラムコードやアルゴリズムの記述に用いられ,第 \begin_inset CommandInset ref LatexCommand ref reference "cha:プログラムコードリスト" \end_inset 章で説明されているプログラムコードリストの代わりとみなすことができます. \emph on \SpecialChar LyX ユーザーの手引き \emph default に述べられているように,アルゴリズム向けの環境としては, \family sans \SpecialChar LyX コード \family default があります. アルゴリズム \begin_inset CommandInset ref LatexCommand ref reference "alg:アルゴリズムフロートの例" \end_inset は,アルゴリズムフロートの一例であり,下の罫線が最後の文字行のちょうど下に来るように,フロートの終わりに-4 \begin_inset space \thinspace{} \end_inset mmの垂直空白が入れてあります. \end_layout \begin_layout Standard フロートラベルは,自動的に文書言語に翻訳されるわけではありません.使用中の文書が英語でない場合には,文書プリアンブルに \end_layout \begin_layout Standard \series bold \backslash floatname{algorithm}{付けたい名称} \end_layout \begin_layout Standard という行を手動で加える必要があります.ここで \family sans \series bold 付けたい名称 \family default \series default には,お使いの言語で「 \emph on algorithm \emph default 」に対応する単語を指定します. \end_layout \begin_layout Standard アルゴリズム一覧を挿入するには,文書言語が\SpecialChar LyX のメニューに表示されている言語と同じであるならば, \family sans 挿入\SpecialChar menuseparator 一覧/目次\SpecialChar menuseparator アルゴリズム一覧 \family default メニューを使用します.それ以外の場合には,代わりに \end_layout \begin_layout Standard \series bold \backslash listof{algorithm}{付けたい名称} \end_layout \begin_layout Standard というコマンドを\SpecialChar TeX コードとして用います.ここで \family sans 付けたい名称 \family default とは,「 \emph on List of Algorithm \emph default s」という単語に相当する,ご使用になりたい言語での単語です. \end_layout \begin_layout Standard アルゴリズムフロートは,多くの文書クラスにおける図表フロートとは違って,「chapter.algorithm」スキームでは既定で付番されていません.このスキームで アルゴリズムフロートに連番を振るには,使用している文書のプリアンブルに \end_layout \begin_layout Standard \series bold \backslash numberwithin{algorithm}{chapter} \end_layout \begin_layout Standard というコマンドを追加してください. \series bold \backslash numberwithin \series default というコマンドを使用するには,文書設定の \family sans 数式オプション \family default タブで \family sans AMS mathパッケージを使用する \family default オプションを有効にしてください. \end_layout \begin_layout Section フロートの連番 \begin_inset Index idx status collapsed \begin_layout Plain Layout ふろーと@フロート ! れんばん@連番 \end_layout \end_inset \end_layout \begin_layout Standard フロートは通常,フロートのある節とは関係なく番号が振られるか,あるいは「章.番号」や「節.番号」といった形で番号が付けられます.これは,使用している文書クラスによっ て変わります. \end_layout \begin_layout Standard 節から独立して付けられている連番を変更するには,文書プリアンブルで \end_layout \begin_layout Standard \series bold \backslash renewcommand{ \backslash thetable}{ \backslash roman{table}} \end_layout \begin_layout Standard \series bold というコマンドを使うと良いでしょう. \backslash thetable \series default は表番号を印字するコマンドで,図フロートの場合であれば,代わりに \series bold \backslash thefigure \series default コマンドを使用します.上のコマンドで使用されている \series bold \backslash roman \series default は,表番号を小文字のローマ数字で印字するコマンドです. \end_layout \begin_layout Standard 連番の付け方をたとえば「小節.番号」に変更するには,プリアンブルで \end_layout \begin_layout Standard \series bold \backslash numberwithin{table}{subsection} \end_layout \begin_layout Standard というコマンドを使用してください. \series bold \backslash numberwithin \series default コマンドを使用可能にするためには,文書設定の \family sans 数式オプション \family default タブで, \family sans AMS \begin_inset space ~ \end_inset math数式パッケージを使用する \family default を使用します. \end_layout \begin_layout Standard 連番コマンドについての詳細と大切な注意点については,第 \begin_inset CommandInset ref LatexCommand ref reference "subsec:脚注の付番" \end_inset 節もご覧ください. \end_layout \begin_layout Section フロートの参照 \begin_inset CommandInset label LatexCommand label name "sec:フロートの参照" \end_inset \begin_inset Index idx status collapsed \begin_layout Plain Layout ふろーと@フロート ! さんしょう@参照 \end_layout \end_inset \begin_inset Index idx status collapsed \begin_layout Plain Layout さんしょう@参照 ! ふろーとにたいする@フロートに対する \end_layout \end_inset \end_layout \begin_layout Standard フロートを参照するには, \family sans 挿入\SpecialChar menuseparator ラベル \family default メニューかツールバーボタンを使用して,フロートのキャプションにラベルを挿入してください. \begin_inset Graphics filename clipart/label.png scaleBeforeRotation \end_inset のような灰色のラベルボックスが挿入され,ラベルウィンドウがポップアップして,ラベルの字句を入力するよう促します.\SpecialChar LyX は,キャプションの最初の数単語に前置句をつけたも のを候補として示します.前置句はフロート型に依存し,たとえば図フロートには「 \family sans fig: \family default 」という前置句がつけられます. \end_layout \begin_layout Standard ラベルは,参照のための名称兼位置標として用いられます. \family sans 挿入\SpecialChar menuseparator 相互参照 \family default メニューかツールバーボタン \family sans \begin_inset Info type "icon" arg "dialog-show-new-inset ref" \end_inset \family default を使えば,ラベルを参照することができます. \begin_inset Graphics filename clipart/reference.png scaleBeforeRotation \end_inset のような灰色の相互参照ボックスが挿入され,文書中のすべてのラベルを表示した相互参照ウィンドウが現れます.複数の\SpecialChar LyX 文書が開かれている場合には,ダイアログの上方にある ドロップリストから作業中の文書を選択してください.ここでラベルを整序してから選ぶこともできます.出力中では,相互参照ボックスの位置にはフロート番号が表示されます . \end_layout \begin_layout Standard 相互参照名と数字の間に改行が入るのを防ぐために,両者の間の空白には保護された空白を用いた方が良いでしょう.もし相互参照が存在しないラベルを参照している場合には, 出力では,参照の代わりに二つの疑問符が表示されることになります. \end_layout \begin_layout Standard ラベルは,ラベルボックスをクリックすることによって,いつでも変更することができます.変更されたラベルへの参照は,自動的に新しいラベル文へのリンクに変更されますの で,リンクの更新に手間を割く必要はありません. \end_layout \begin_layout Standard 相互参照ウィンドウの \family sans ラベルへ移動 \family default ボタンは,参照されているラベルの前にカーソルを移動します.すると,ボタンの文字が \family sans 戻る \family default に変わるので,相互参照にカーソルを戻すのに使用することができます. \end_layout \begin_layout Subsection 相互参照の書式 \begin_inset CommandInset label LatexCommand label name "subsec:相互参照の書式" \end_inset \begin_inset Index idx status collapsed \begin_layout Plain Layout さんしょう@参照 ! しょしき@書式 \end_layout \end_inset \end_layout \begin_layout Standard 相互参照には,以下の6種類があります. \end_layout \begin_layout Description <参照>: これはフロート番号を表示します.これが既定値です.例: \begin_inset CommandInset ref LatexCommand ref reference "fig:歪められた二つの像" \end_inset \end_layout \begin_layout Description (<参照>): これはフロート番号を2つのかっこの中に表示します.これはふつう数式を,とくに参照名「Equation」を省略して参照する際に用いられる様式です. 例: \begin_inset CommandInset ref LatexCommand eqref reference "eq:Wgn" \end_inset \end_layout \begin_layout Description <参照ページ>: これはページ番号を表示します.例:Page \begin_inset space ~ \end_inset \begin_inset CommandInset ref LatexCommand pageref reference "fig:歪められた二つの像" \end_inset \end_layout \begin_layout Description on \begin_inset space ~ \end_inset page \begin_inset space ~ \end_inset <参照ページ>: これは「on page」という文とページ番号を表示します.例: \begin_inset CommandInset ref LatexCommand vpageref reference "fig:歪められた二つの像" \end_inset \end_layout \begin_layout Description <参照> \begin_inset space ~ \end_inset on \begin_inset space ~ \end_inset page \begin_inset space ~ \end_inset <参照ページ>: これはフロート番号と「on page」という文とページ番号を表示します.例: \begin_inset CommandInset ref LatexCommand vref reference "fig:歪められた二つの像" \end_inset \end_layout \begin_layout Description 整形された参照: これは自製の相互参照書式で出力します. \begin_inset Newline newline \end_inset \begin_inset Note Greyedout status open \begin_layout Plain Layout \series bold 【註】 \series default この機能は,\SpecialChar LaTeX パッケージ \series bold prettyref \series default または \series bold refstyle \series default が導入されている場合のみ使用することができます. \begin_inset Index idx status collapsed \begin_layout Plain Layout \SpecialChar LaTeX ぱっけーじ@\SpecialChar LaTeX パッケージ! prettyref \end_layout \end_inset \begin_inset Index idx status collapsed \begin_layout Plain Layout \SpecialChar LaTeX ぱっけーじ@\SpecialChar LaTeX パッケージ ! refstyle \end_layout \end_inset \end_layout \end_inset \begin_inset Newline newline \end_inset メニュー \family sans 文書\SpecialChar menuseparator 設定\SpecialChar menuseparator 文書クラス \family default でオプション \family sans 相互参照に(prettyrefではなく)refstyleを使用 \family default を設定すると,この機能で使用する\SpecialChar LaTeX パッケージを選択することができます.書式は,文書プリアンブルに \series bold \backslash newrefformat \series default コマンド(prettyrefの場合)あるいは \series bold \backslash newref \series default コマンド(refstyleの場合)を書き加えることによって指定することができます.たとえば,図への参照(これは短絡ラベル「 \family sans fig \family default 」を持ちます)をすべて定義し直すには, \begin_inset Newline newline \end_inset \series bold \backslash newref{fig}{refcmd={Image on page \backslash pageref{#1}}} \begin_inset Newline newline \end_inset \series default というコマンドを用います.書式についての詳細は,パッケージの取扱説明書 \begin_inset CommandInset citation LatexCommand cite key "prettyref,refstyle" literal "true" \end_inset をご覧ください. \begin_inset Newline newline \end_inset \lang english The options \family sans Plural \family default and \family sans Capitalized \family default are only available if you use the \SpecialChar LaTeX -package \series bold refstyle \series default . Both options are not useful for Japanese documents because \family sans Plural \family default adds an \emph on s \emph default to the name, e. \begin_inset space \thinspace{} \end_inset g. \begin_inset space \space{} \end_inset \begin_inset Quotes eld \end_inset images \begin_inset Quotes erd \end_inset and \family sans Capitalized \family default outputs the name capitalized, e. \begin_inset space \thinspace{} \end_inset g. \begin_inset space \space{} \end_inset \begin_inset Quotes eld \end_inset Image \begin_inset Quotes erd \end_inset . \end_layout \begin_layout Description 名称参照: これは,下のような参照のキャプションを出力します. \begin_inset Newline newline \end_inset \begin_inset CommandInset ref LatexCommand nameref reference "fig:歪められた二つの像" \end_inset \end_layout \begin_layout Description \lang english Label \begin_inset space ~ \end_inset only: prints only the \SpecialChar LaTeX label for the reference: \lang japanese \begin_inset CommandInset ref LatexCommand labelonly reference "fig:歪められた二つの像" plural "false" caps "false" noprefix "false" \end_inset \lang english \begin_inset Newline newline \end_inset This allows to use the label for commands in \SpecialChar TeX code. With the option \family sans No Prefix \family default one can omit the prefix of the label name: \lang japanese \begin_inset CommandInset ref LatexCommand labelonly reference "fig:歪められた二つの像" plural "false" caps "false" noprefix "true" \end_inset \end_layout \begin_layout Standard \family sans <参照ページ> \family default は,ラベルが同一あるいは前後ページにある場合には,ページ番号を出力しません.その代わりに「 \family sans on this page \family default 」のような文章が表示されます.様式 \family sans <参照> on page <参照ページ> \family default では,ラベルが同一ページにある場合には,ページに関することは出力されません. \end_layout \begin_layout Standard 出力中で参照されている頁番号と文書中の位置は,\SpecialChar LaTeX が自動的に計算します.参照の種類は,相互参照ボックスをクリックすると現れる相互参照ウィンドウ中の \family sans 書式 \family default フィールドで選ぶことができます. \end_layout \begin_layout Standard \begin_inset Note Greyedout status open \begin_layout Plain Layout \series bold 【註】 \series default \SpecialChar LaTeX パッケージ \series bold prettyref \series default \begin_inset Index idx status collapsed \begin_layout Plain Layout \SpecialChar LaTeX ぱっけーじ@\SpecialChar LaTeX パッケージ! prettyref \end_layout \end_inset は,\SpecialChar LyX の取り得るラベル \begin_inset Flex Ruby status collapsed \begin_layout Plain Layout 捷径 \begin_inset Argument post:1 status collapsed \begin_layout Plain Layout ショートカット \end_layout \end_inset \end_layout \end_inset \begin_inset Foot status collapsed \begin_layout Plain Layout 例えば, \begin_inset Quotes eld \end_inset fig: \begin_inset Quotes erd \end_inset は図キャプションを表す\SpecialChar LyX \begin_inset Flex Ruby status collapsed \begin_layout Plain Layout 捷径 \begin_inset Argument post:1 status collapsed \begin_layout Plain Layout ショートカット \end_layout \end_inset \end_layout \end_inset です. \end_layout \end_inset を全部は解釈できず,国際化もされていないので, \series bold refstyle \series default \begin_inset Index idx status collapsed \begin_layout Plain Layout \SpecialChar LaTeX ぱっけーじ@\SpecialChar LaTeX パッケージ ! refstyle \end_layout \end_inset を使用することを推奨します. \end_layout \end_inset \end_layout \begin_layout Subsection 参照名の自動命名 \begin_inset Index idx status collapsed \begin_layout Plain Layout さんしょう@参照 ! じどうめいめい@自動命名 \end_layout \end_inset \end_layout \begin_layout Standard \family sans 文書設定 \family default ダイアログの \family sans PDF特性 \family default で有効にされた \series bold hyperref \series default \begin_inset Index idx status collapsed \begin_layout Plain Layout \SpecialChar LaTeX ぱっけーじ@\SpecialChar LaTeX パッケージ ! hyperref \end_layout \end_inset \SpecialChar LaTeX パッケージは,相互参照が参照されたフロート(あるいは \emph on 節 \emph default のような文章中の箇所)の名称を自動的に取り入れてくれるという,たいへん便利な機能を提供します.つまり,図への参照毎に前に「図」と書き込む必要はなくなるのです.こ の機能を使用するには,hyperrefを有効にして, \end_layout \begin_layout Standard \series bold \backslash AtBeginDocument{ \backslash renewcommand{ \backslash ref}[1]{ \backslash mbox{ \backslash autoref{#1}}}} \end_layout \begin_layout Standard という行を\SpecialChar LaTeX プリアンブルに挿入してください.たとえば「section」の代わりに「sec. \begin_inset space \thinspace{} \end_inset 」としたいなど,既定の参照名以外のものが欲しい場合には, \end_layout \begin_layout Standard \series bold \backslash addto \backslash extrasenglish{ \backslash renewcommand{ \backslash sectionautorefname} \begin_inset Newline newline \end_inset \begin_inset Phantom HPhantom status open \begin_layout Plain Layout \series bold \begin_inset space ~ \end_inset \end_layout \end_inset {sec. \backslash negthinspace}} \end_layout \begin_layout Standard のようにプリアンブルに挿入することで参照名を再定義することができます.英語以外の文書言語を使用している際には, \begin_inset Newline newline \end_inset \series bold \backslash extrasenglishを \backslash extras*** \series default に置き換えてください(***は使用中の言語名). \end_layout \begin_layout Standard 自動命名を行いたいけれども,ある参照型以外,たとえば数式以外に対して行いたいときには,以下のようなプリアンブルコードを書いてください. \end_layout \begin_layout Standard \series bold \backslash addto \backslash extrasenglish{ \backslash renewcommand*{ \backslash equationautorefname}[1]{}} \end_layout \begin_layout Standard この話題に関する詳細は,hyperrefの説明書 \begin_inset CommandInset citation LatexCommand cite key "hyperref" literal "true" \end_inset をお読みください. \end_layout \begin_layout Standard \begin_inset Note Greyedout status open \begin_layout Plain Layout \series bold 【註】 \series default 参照の自動命名は,相互参照を \family sans 整形参照 \family default 様式(第 \begin_inset CommandInset ref LatexCommand ref reference "subsec:相互参照の書式" \end_inset 節)で使用しているときには,使用することができません. \end_layout \end_inset \end_layout \begin_layout Standard \SpecialChar LyX の取扱説明書『 \emph on 数式篇 \emph default 』では,参照名の自動命名が使用されています. \end_layout \begin_layout Subsection 参照位置 \begin_inset CommandInset label LatexCommand label name "subsec:参照位置" \end_inset \begin_inset Index idx status collapsed \begin_layout Plain Layout さんしょう@参照 ! さんしょういち@参照位置 \end_layout \end_inset \end_layout \begin_layout Standard \family sans 文書設定 \family default ダイアログの \family sans PDF特性 \family default で, \series bold hyperref \series default \begin_inset Index idx status collapsed \begin_layout Plain Layout \SpecialChar LaTeX ぱっけーじ@\SpecialChar LaTeX パッケージ ! hyperref \end_layout \end_inset を使用して出力中で相互参照をリンクするようにした場合には,画像フロート参照をクリックすると,画像ラベルに移動できるようになります.キャプションは,スクリーン上の テキストの最初の部分なので,スクロールしないと画像を見ることができません.これは,参照リンク標がラベルの位置に置かれるからです.\SpecialChar LaTeX パッケージの \series bold hyperref \series default \begin_inset Index idx status collapsed \begin_layout Plain Layout \SpecialChar LaTeX ぱっけーじ@\SpecialChar LaTeX パッケージ ! hyperref \end_layout \end_inset の一部である \series bold hyperref \series default \begin_inset Index idx status collapsed \begin_layout Plain Layout \SpecialChar LaTeX ぱっけーじ@\SpecialChar LaTeX パッケージ ! hyperref \end_layout \end_inset パッケージを使うと,リンク標はフロートの最初に置かれます.この機能を図フロートに対して使用するには,文書プリアンブルに \end_layout \begin_layout Standard \series bold \backslash usepackage[figure]{hypcap} \end_layout \begin_layout Standard という行を書いて,hypcapを読み込んでください.hypcapをすべてのフロート型に対して使用することもできますが,安定性の問題から推奨できません.詳しくは, hypcapの説明書 \begin_inset CommandInset citation LatexCommand cite key "hypcap" literal "true" \end_inset をご覧ください. \end_layout \begin_layout Standard \begin_inset Note Greyedout status open \begin_layout Plain Layout \series bold 【註】hypcap \series default は内部図への参照には効力がありません. \end_layout \end_inset \end_layout \begin_layout Section フロートの配置 \begin_inset CommandInset label LatexCommand label name "sec:フロートの配置" \end_inset \begin_inset Index idx status collapsed \begin_layout Plain Layout ふろーと@フロート ! はいち@配置 \end_layout \end_inset \end_layout \begin_layout Standard \family roman \series medium \shape up \size normal \emph off \bar no \noun off \color none フロートボックスを右クリックすると,ダイアログが開いて,ここで\SpecialChar LaTeX がフロートを配置するのに使う配置オプションを変更できるようになります. \begin_inset Newline newline \end_inset \family sans \series default \shape default \size default \emph default \bar default \noun default \color inherit 段をまたぐ \family roman \series medium \shape up \size normal \emph off \bar no \noun off \color none オプションは,二段組文書でのみ有効です.これを選択すると,フロートは段の中のみに収められないで,ページの両段にまたがって広がります. \begin_inset Newline newline \end_inset \family sans \series default \shape default \size default \emph default \bar default \noun default \color inherit 横倒しに回転 \family roman \series medium \shape up \size normal \emph off \bar no \noun off \color none オプションは,フロートを回転するのに用います.第 \family default \series default \shape default \size default \emph default \bar default \noun default \color inherit \begin_inset CommandInset ref LatexCommand ref reference "sec:回転フロート" \end_inset \family roman \series medium \shape up \size normal \emph off \bar no \noun off \color none 節をご参照ください. \end_layout \begin_layout Standard \family roman \series medium \shape up \size normal \emph off \bar no \noun off \color none フロートダイアログでは, \family sans \series default \shape default \size default \emph default \bar default \noun default \color inherit 既定の配置を使う \family roman \series medium \shape up \size normal \emph off \bar no \noun off \color none オプションを無効にしたときには,特定のフロートの配置を設定するのに以下のオプションの一つ以上を設定することができます. \end_layout \begin_layout Description 可能ならば現在位置に: \family roman \series medium \shape up \size normal \emph off \bar no \noun off \color none フロートを挿入位置に配置することを試みます \end_layout \begin_layout Description ページ上部: \family roman \series medium \shape up \size normal \emph off \bar no \noun off \color none フロートを現在ページの上部に配置することを試みます \end_layout \begin_layout Description ページ下部: \family roman \series medium \shape up \size normal \emph off \bar no \noun off \color none フロートを現在ページの下部に配置することを試みます \end_layout \begin_layout Description フロートを独立したページに: \family roman \series medium \shape up \size normal \emph off \bar no \noun off \color none フロートを独立したページに配置することを試みます \end_layout \begin_layout Standard \SpecialChar LaTeX は, \emph on つねに \emph default 上記のオプション順を用います.すなわち,既定の配置を使用すると,\SpecialChar LaTeX はまず \family sans 可能ならば現在位置に \family default を試み,次に \family sans ページの上部 \family default ,その後他のオプションを試みます.既定値を使わないときには,\SpecialChar LaTeX は有効化されたオプションのみを使用しますが,やはり同じ順序でこれらを試みます.これら四つの配置がいず れも無理な場合は,フロートを内部的に次のページにおいてみて同様の手続きがうまくいくかどうかを試みます. \end_layout \begin_layout Standard 既定では,各オプションはそれぞれ以下の規則を持っています. \end_layout \begin_layout Labeling \labelwidthstring 00.00.0000 \family sans ページ上部 \family default は,フロートのページに占める割合が7割以下の場合のみ,ページ上部に配置します( \series bold \backslash topfraction \series default ). \end_layout \begin_layout Labeling \labelwidthstring 00.00.0000 \family sans ページ下部 \family default は,フロートのページに占める割合が3割以下の場合のみ,ページ下部に配置します( \series bold \backslash bottomfraction \series default ). \end_layout \begin_layout Labeling \labelwidthstring 00.00.0000 \family sans フロートを独立したページ \family default には,フロートのページに占める割合が5割以下の場合のみ,複数のフロートを同一ページに配置します( \series bold \backslash floatpagefraction \series default ). \end_layout \begin_layout Standard これらの規則に従いたくないときは, \family sans \SpecialChar LaTeX の規則を無視する \family default オプションを追加することによって,これらを無視することができます. \begin_inset Newline newline \end_inset 上記説明の後ろに括弧でくくってある\SpecialChar LaTeX コマンドを使うと,これらの規則を定義しなおすこともできます.たとえば,往々にして小さすぎる,ページ下部規則の既定値を,ページの 5割に変えるには,文書プリアンブルに \end_layout \begin_layout Standard \series bold \backslash renewcommand{ \backslash bottomfraction}{0.5} \end_layout \begin_layout Standard という行を加えてください. \end_layout \begin_layout Standard ときにはフロートを,挿入位置に正確に,しかもかならず配置させたい場合があるかもしれません.このような場合には, \family sans 何としても現在位置に置く \family default オプションを使用します.このオプションはできる限り使わないようにし,使う場合でも印刷する直前にまで文書が仕上がってから,使用するようにしてください.なぜならば, このオプションを使うことによって,フロートはもはや「漂う」ことができなくなりますから,文書に変更を加えてしまうと,ページのレイアウトが往々にして破壊されてしまう からです. \end_layout \begin_layout Standard 折返しフロートは,つねにどれかの段落の本文で囲まれますので,配置オプションはありません. \end_layout \begin_layout Standard \begin_inset VSpace bigskip \end_inset \end_layout \begin_layout Standard 対応する節がページの中程から始まるのというのに,フロートがページの先頭に置かれてしまうために,読者がフロートを前節の一部であると勘違いしてしまうという問題に直面 することがあります.この問題を避けるには,\SpecialChar LaTeX コマンドの \backslash suppressfloatsを使用することができます.これは,これが挿入されたページの特定のフロートの配置を抑制するので,節が始まる前にフロートが設定されてしま うのを避けるのに使用することができます.これを用いるには,文書プリアンブルに以下のコマンドを加えてください. \end_layout \begin_layout Standard \series bold \backslash let \backslash mySection \backslash section \begin_inset Newline newline \end_inset \backslash renewcommand{ \backslash section}{ \backslash suppressfloats[t] \backslash mySection} \end_layout \begin_layout Standard これと同じものは,章や小節など,すべての節見出しに用いることができます.この定義は,小々節のような小さい文字の部分では,\SpecialChar LaTeX が適当な配置を見つけるのに失敗することが あるので,これらに対する定義はお勧めしません. \end_layout \begin_layout Standard \begin_inset VSpace bigskip \end_inset 場合によっては,すべての図表を文末に置く必要があることがあります.この目的のために,\SpecialChar LaTeX パッケージ \series bold endfloat \series default \begin_inset Index idx status collapsed \begin_layout Plain Layout \SpecialChar LaTeX ぱっけーじ@\SpecialChar LaTeX パッケージ ! endfloat \end_layout \end_inset が開発されました.このパッケージは,すべての図表を文末に独立した節として置きます.元のフロート位置には, \begin_inset Quotes eld \end_inset \family sans [Figure \begin_inset space ~ \end_inset 3.2 about here.] \family default \begin_inset Quotes erd \end_inset というようなヒント文が挿入されます.endfloatパッケージは,プリアンブルに \end_layout \begin_layout Standard \series bold \backslash usepackage[options]{endfloat} \end_layout \begin_layout Standard という行を加えることで読み込まれます.このようにして生成された図表の節を整形するために,さまざまなパッケージオプションがあります.詳細は, \series bold endfloat \series default 取扱説明書 \begin_inset CommandInset citation LatexCommand cite key "endfloat" literal "true" \end_inset をご参照ください. \begin_inset Newline newline \end_inset \begin_inset Note Greyedout status open \begin_layout Plain Layout \series bold 【註】endfloat \series default は,ヒント文の自動翻訳を行わないので,手動で行わなくてはなりません. \begin_inset CommandInset citation LatexCommand cite key "endfloat" literal "true" \end_inset の第4節をご参照ください. \end_layout \end_inset \begin_inset Newline newline \end_inset \begin_inset Note Greyedout status open \begin_layout Plain Layout \series bold 【註】 \series default 現在のところ, \series bold endfloat \series default にはキャプションにドイツ語の「ß」が含まれているときにうまく動かないバグがあります.この場合には,「ß」の代わりに\SpecialChar TeX コードで「 \series bold \backslash ss \series default 」コマンドを使用してください. \end_layout \end_inset \end_layout \begin_layout Standard \begin_inset VSpace bigskip \end_inset フロートの割付に関する詳細は,\SpecialChar LaTeX 関連書 \begin_inset CommandInset citation LatexCommand cite key "latexcompanion,latexguide,latexbook" literal "true" \end_inset をご覧ください. \end_layout \begin_layout Section 回転フロート \begin_inset CommandInset label LatexCommand label name "sec:回転フロート" \end_inset \begin_inset Index idx status collapsed \begin_layout Plain Layout ふろーと@フロート ! かいてん@回転 \end_layout \end_inset \end_layout \begin_layout Standard 特に横長の表などの場合,フロートを回転させたいことがあります.キャプションを含むフロート全体を回転させたいときは,フロートボックスを右クリックして, \family sans 横倒しに回転 \family default オプションを有効にします. \end_layout \begin_layout Standard 回転フロートは,つねに独立したページ(二段組文書のときは独立した段)に配置されます.フロート設定の \family sans 段をまたぐ \family default オプションを有効にすれば,複数の段にまたがるようにすることができます.また,回転フロートは,外側余白方向から読むことができるような形に回転されます.全ページにわ たって回転方向を強制したい場合には,文書クラスオプションに \series bold figuresleft \series default オプションあるいは \series bold figuresright \series default オプションを加えることができます. \end_layout \begin_layout Standard 回転フロートへの相互参照は,通常のフロートの場合と同じです.キャプションの形式も同じです.表 \begin_inset CommandInset ref LatexCommand ref reference "tab:回転した表" \end_inset が回転表フロートの例です. \end_layout \begin_layout Standard \begin_inset Note Greyedout status open \begin_layout Plain Layout \series bold 【註】 \series default すべてのDVIビューアが回転フロートを表示できるわけではありません. \end_layout \end_inset \end_layout \begin_layout Standard \begin_inset Float table wide false sideways true status open \begin_layout Plain Layout \begin_inset Caption Standard \begin_layout Plain Layout \begin_inset CommandInset label LatexCommand label name "tab:回転した表" \end_inset 回転した表 \end_layout \end_inset \end_layout \begin_layout Plain Layout \align center \begin_inset Tabular <lyxtabular version="3" rows="1" columns="5"> <features tabularvalignment="middle"> <column alignment="center" valignment="top"> <column alignment="center" valignment="top"> <column alignment="center" valignment="top"> <column alignment="center" valignment="top"> <column alignment="center" valignment="top"> <row> <cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 試験 \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 甲 \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 乙 \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 丙 \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 丁 \end_layout \end_inset </cell> </row> </lyxtabular> \end_inset \end_layout \end_inset \end_layout \begin_layout Section 従属フロート \begin_inset Index idx status collapsed \begin_layout Plain Layout ふろーと@フロート ! じゅうぞくふろーと@従属フロート \end_layout \end_inset \end_layout \begin_layout Standard 従属フロートは,図が複数の画像から成るような場合に使用します.これは,フロートの中に新たなフロートを挿入することで作ることができます.従属フロートの揃えは,表 \begin_inset CommandInset ref LatexCommand ref reference "tab:従属表を横に並べたもの" \end_inset と表 \begin_inset CommandInset ref LatexCommand ref reference "tab:従属表を縦に並べたもの" \end_inset に示されているように段落と同様に指定することができます. \end_layout \begin_layout Standard 従属フロートの参照は,通常のフロートの参照と同様にすることができます.例:表 \begin_inset CommandInset ref LatexCommand ref reference "tab:これは従属表a" \end_inset と表 \begin_inset CommandInset ref LatexCommand ref reference "tab:これは従属表b" \end_inset は表 \begin_inset CommandInset ref LatexCommand ref reference "tab:従属表を横に並べたもの" \end_inset の従属フロートです. \begin_inset Float table wide false sideways false status open \begin_layout Plain Layout \begin_inset Caption Standard \begin_layout Plain Layout \begin_inset CommandInset label LatexCommand label name "tab:従属表を横に並べたもの" \end_inset 従属表を横に並べたもの \end_layout \end_inset \end_layout \begin_layout Plain Layout \begin_inset space \hfill{} \end_inset \begin_inset Float table wide false sideways false status collapsed \begin_layout Plain Layout \begin_inset Caption Standard \begin_layout Plain Layout \begin_inset CommandInset label LatexCommand label name "tab:これは従属表a" \end_inset これは従属表aです. \end_layout \end_inset \end_layout \begin_layout Plain Layout \align center \begin_inset Tabular <lyxtabular version="3" rows="1" columns="5"> <features tabularvalignment="middle"> <column alignment="center" valignment="top"> <column alignment="center" valignment="top"> <column alignment="center" valignment="top"> <column alignment="center" valignment="top"> <column alignment="center" valignment="top"> <row> <cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 試験 \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 甲 \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 乙 \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 丙 \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 丁 \end_layout \end_inset </cell> </row> </lyxtabular> \end_inset \end_layout \end_inset \begin_inset space \hfill{} \end_inset \begin_inset Float table wide false sideways false status collapsed \begin_layout Plain Layout \begin_inset Caption Standard \begin_layout Plain Layout \begin_inset CommandInset label LatexCommand label name "tab:これは従属表b" \end_inset これは従属表bです. \end_layout \end_inset \end_layout \begin_layout Plain Layout \align center \begin_inset Tabular <lyxtabular version="3" rows="1" columns="5"> <features tabularvalignment="middle"> <column alignment="center" valignment="top"> <column alignment="center" valignment="top"> <column alignment="center" valignment="top"> <column alignment="center" valignment="top"> <column alignment="center" valignment="top"> <row> <cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 丁 \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 丙 \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 乙 \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 甲 \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 試験 \end_layout \end_inset </cell> </row> </lyxtabular> \end_inset \end_layout \end_inset \begin_inset space \hfill{} \end_inset \end_layout \end_inset \begin_inset Float table wide false sideways false status open \begin_layout Plain Layout \begin_inset Caption Standard \begin_layout Plain Layout \begin_inset CommandInset label LatexCommand label name "tab:従属表を縦に並べたもの" \end_inset 従属表を縦に並べたもの.(a)は4セルから成る表,(b)は5セルから成る表. \end_layout \end_inset \end_layout \begin_layout Plain Layout \noindent \align center \begin_inset Float table wide false sideways false status collapsed \begin_layout Plain Layout \begin_inset Caption Standard \begin_layout Plain Layout \end_layout \end_inset \end_layout \begin_layout Plain Layout \align center \begin_inset Tabular <lyxtabular version="3" rows="1" columns="4"> <features tabularvalignment="middle"> <column alignment="center" valignment="top"> <column alignment="center" valignment="top"> <column alignment="center" valignment="top"> <column alignment="center" valignment="top"> <row> <cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 試験 \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 試験 \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 試験 \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 試験 \end_layout \end_inset </cell> </row> </lyxtabular> \end_inset \end_layout \end_inset \end_layout \begin_layout Plain Layout \noindent \align center \begin_inset Float table wide false sideways false status collapsed \begin_layout Plain Layout \begin_inset Caption Standard \begin_layout Plain Layout \end_layout \end_inset \end_layout \begin_layout Plain Layout \align center \begin_inset Tabular <lyxtabular version="3" rows="1" columns="5"> <features tabularvalignment="middle"> <column alignment="center" valignment="top"> <column alignment="center" valignment="top"> <column alignment="center" valignment="top"> <column alignment="center" valignment="top"> <column alignment="center" valignment="top"> <row> <cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 甲 \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 乙 \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 丙 \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 丁 \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 戊 \end_layout \end_inset </cell> </row> </lyxtabular> \end_inset \end_layout \end_inset \end_layout \end_inset \end_layout \begin_layout Section 横並びのフロート \begin_inset Index idx status collapsed \begin_layout Plain Layout ふろーと@フロート ! よこならび@横並び \end_layout \end_inset \end_layout \begin_layout Standard 図 \begin_inset CommandInset ref LatexCommand ref reference "fig:左側のフロート" \end_inset や図 \begin_inset CommandInset ref LatexCommand ref reference "fig:右側のフロート" \end_inset のようにフロートを横並びに配置するには, \emph on ひとつの \emph default フロートのみを使用し,その中に二つのminipageボックスを挿入します \begin_inset Foot status collapsed \begin_layout Plain Layout Minipageは第 \begin_inset CommandInset ref LatexCommand ref reference "sec:ミニページ" \end_inset 節に説明があります. \end_layout \end_inset .幅は45 \begin_inset space \thinspace{} \end_inset -50 \begin_inset space \thinspace{} \end_inset 列幅%とし,各minipageのボックス配置を \family sans 下 \family default に設定します.minipageボックスには,フロートと同じように画像とキャプションを入れます.フロートと唯一違う点は,画像単位 \family sans 列幅% \family default がここではminipageボックスの幅によって計算されることです. \end_layout \begin_layout Standard \begin_inset Float figure wide false sideways false status open \begin_layout Plain Layout \begin_inset Box Frameless position "b" hor_pos "c" has_inner_box 1 inner_pos "t" use_parbox 0 use_makebox 0 width "45col%" special "none" height "1in" height_special "totalheight" thickness "0.4pt" separation "3pt" shadowsize "4pt" framecolor "black" backgroundcolor "none" status open \begin_layout Plain Layout \align center \begin_inset Graphics filename ../clipart/2D-intensity-plot.pdf width 100col% scaleBeforeRotation \end_inset \end_layout \begin_layout Plain Layout \begin_inset Caption Standard \begin_layout Plain Layout \begin_inset CommandInset label LatexCommand label name "fig:左側のフロート" \end_inset 左側のフロート \end_layout \end_inset \end_layout \end_inset \begin_inset space \hfill{} \end_inset \begin_inset Box Frameless position "b" hor_pos "c" has_inner_box 1 inner_pos "t" use_parbox 0 use_makebox 0 width "45col%" special "none" height "1in" height_special "totalheight" thickness "0.4pt" separation "3pt" shadowsize "4pt" framecolor "black" backgroundcolor "none" status open \begin_layout Plain Layout \align center \begin_inset Graphics filename ../clipart/Star-structure.pdf width 100col% scaleBeforeRotation \end_inset \end_layout \begin_layout Plain Layout \begin_inset Caption Standard \begin_layout Plain Layout \begin_inset CommandInset label LatexCommand label name "fig:右側のフロート" \end_inset 右側のフロート \end_layout \end_inset \end_layout \end_inset \end_layout \begin_layout Plain Layout \end_layout \end_inset 2つのフロートを横に並べるには,可変幅ミニページを使うと簡単にできます(第 \begin_inset CommandInset ref LatexCommand ref reference "sec:可変幅ミニページ" \end_inset 節参照).可変幅ミニページは,図の幅に自動的に調整されます.明示的に幅を指定する必要もなく,図の水平方向の配置も調整してくれます.ファイル \family typewriter examples/varwidth-floats-side-by-side.lyx \family default に,この方法の例があります. \end_layout \begin_layout Section キャプションの書式設定 \begin_inset Index idx status collapsed \begin_layout Plain Layout きゃぷしょん@キャプション ! しょしきせってい@書式設定 \end_layout \end_inset \begin_inset Index idx status collapsed \begin_layout Plain Layout ふろーと@フロート ! きゃぷしょんのしょしきせってい@キャプションの書式設定 \end_layout \end_inset \begin_inset CommandInset label LatexCommand label name "sec:キャプションの書式設定" \end_inset \end_layout \begin_layout Standard \family sans キャプション \family default 環境は, \family sans フロート \family default の既定の段落環境です.キャプションは,\SpecialChar LyX 画面上では,例えば「 \family sans 図 #: \family default 」のようなラベルの後に,キャプション文を伴って表示されます.ここで「 \family sans # \family default 」には,実際には参照番号が入ります.既定の設定では,ラベルと番号はキャプション文と同じフォントになっており,ラベルと文を分けるために,番号の後にコロンが入ります .このキャプション書式は,すべての文書書式に適しているわけではありません. \end_layout \begin_layout Standard 既定のキャプション書式を変更するには,文書プリアンブルに \end_layout \begin_layout Standard \series bold \backslash usepackage[format definition]{caption} \end_layout \begin_layout Standard という行を加えて,\SpecialChar LaTeX パッケージ \series bold caption \series default \begin_inset Index idx status collapsed \begin_layout Plain Layout \SpecialChar LaTeX ぱっけーじ@\SpecialChar LaTeX パッケージ ! caption \end_layout \end_inset を読み込んでください.たとえば,ラベルと番号をサンセリフのボールド体にして,表キャプションを,この文書のように常に表の上に置くようにするには, \end_layout \begin_layout Standard \series bold \backslash usepackage[labelfont={bf,sf}, tableposition=top]{caption} \end_layout \begin_layout Standard というコマンドを使用してください.また,各フロート型毎に別々のキャプション書式を定義することもできます.この場合には, \series bold caption \series default パッケージを書式関連オプション抜きで読み込み,文書プリアンブルに \end_layout \begin_layout Standard \series bold \backslash captionsetup[フロート型]{書式定義} \end_layout \begin_layout Standard というコマンドを使用して,個別の書式を指定してください.たとえば,図 \begin_inset CommandInset ref LatexCommand ref reference "fig:図キャプション" \end_inset と表 \begin_inset CommandInset ref LatexCommand ref reference "tab:表キャプション" \end_inset に使われているキャプション書式は,文書プリアンブルに以下のコマンドを指定することで作り出すことができます. \end_layout \begin_layout Standard \series bold \backslash usepackage[tableposition=top]{caption} \series default \begin_inset Newline newline \end_inset \series bold \backslash captionsetup[figure]{labelfont={tt}, textfont=it, indention=1cm,% \begin_inset Newline newline \end_inset \begin_inset Phantom HPhantom status open \begin_layout Plain Layout \backslash captionsetup[figure]{ \end_layout \end_inset labelsep=period} \begin_inset Newline newline \end_inset \backslash captionsetup[table]{labelfont={bf,sf}} \end_layout \begin_layout Standard \begin_inset Note Greyedout status open \begin_layout Plain Layout \series bold 【註】 \series default オプションのうち, \series bold tableposition=top \series default は,文書クラスに \series bold KOMA-script \series default \begin_inset Index idx status collapsed \begin_layout Plain Layout \SpecialChar LaTeX ぱっけーじ@\SpecialChar LaTeX パッケージ ! KOMA-script \end_layout \end_inset が使われているときには,無効になります.この場合には,文書クラスオプション \series bold captions=tableheading \series default を指定しなくてはなりません. \end_layout \end_inset \end_layout \begin_layout Standard \series bold caption \series default パッケージについての詳細は,その取扱説明書 \begin_inset CommandInset citation LatexCommand cite key "caption" literal "true" \end_inset をご覧ください. \end_layout \begin_layout Standard ラベル名を,たとえば「図」から「画像」に変更するには,以下のプリアンブルコマンドを使用してください. \end_layout \begin_layout Standard \series bold \backslash renewcommand{ \backslash fnum@figure}{画像~ \backslash thefigure} \end_layout \begin_layout Standard なお, \series bold \backslash thefigure \series default は表番号を挿入し,「 \series bold ~ \series default 」は保護された空白を入れます. \end_layout \begin_layout Standard \begin_inset VSpace bigskip \end_inset \series bold KOMA-script \series default \begin_inset Index idx status collapsed \begin_layout Plain Layout \SpecialChar LaTeX ぱっけーじ@\SpecialChar LaTeX パッケージ ! KOMA-script \end_layout \end_inset 文書クラス( \family sans article (KOMA-script) \family default ・ \family sans book (KOMA-script) \family default ・ \family sans letter (KOMA-script) \family default ・ \family sans report (KOMA-script) \family default )を使用している場合には, \series bold caption \series default パッケージの代わりに \series bold KOMA-script \series default のビルトインコマンド \series bold etkomafont \series default を使用することもできます.たとえば,キャプションラベルをボールド体にするには,以下のコマンドを文書プリアンブルに加えます. \end_layout \begin_layout Standard \series bold \backslash setkomafont{captionlabel}{ \backslash bfseries} \end_layout \begin_layout Standard \series bold \backslash setkomafont \series default についての詳細は, \series bold KOMA-script \series default の取扱説明書 \begin_inset CommandInset citation LatexCommand cite key "koma-script" literal "true" \end_inset をご覧ください. \end_layout \begin_layout Standard \begin_inset ERT status collapsed \begin_layout Plain Layout \backslash captionsetup[figure]{labelfont={tt}, textfont=it, indention=1cm, labelsep=period } \end_layout \end_inset \begin_inset Note Note status open \begin_layout Plain Layout キャプション書式は,この例のみ変更してあります. \end_layout \end_inset \end_layout \begin_layout Standard \begin_inset Float figure placement !p wide false sideways false status open \begin_layout Plain Layout \align center \begin_inset Graphics filename ../clipart/2D-intensity-plot.pdf scaleBeforeRotation \end_inset \end_layout \begin_layout Plain Layout \begin_inset Caption Standard \begin_layout Plain Layout \begin_inset CommandInset label LatexCommand label name "fig:図キャプション" \end_inset これは,別のキャプション書式を例示するための,一行よりも長い図キャプションです.ここでは,自製キャプション書式が使用されています. \end_layout \end_inset \end_layout \end_inset \end_layout \begin_layout Standard \begin_inset ERT status collapsed \begin_layout Plain Layout \backslash captionsetup[figure]{labelfont={bf,sf}, textfont=rm, indention=0cm, labelsep=col on} \end_layout \end_inset \end_layout \begin_layout Standard \begin_inset Float table placement !p wide false sideways false status open \begin_layout Plain Layout \begin_inset Caption Standard \begin_layout Plain Layout \begin_inset CommandInset label LatexCommand label name "tab:表キャプション" \end_inset これは,別のキャプション書式を例示するための,一行よりも長い表キャプションです.ここでは,この文書での表キャプションの標準書式が使用されています. \end_layout \end_inset \end_layout \begin_layout Plain Layout \align center \begin_inset Tabular <lyxtabular version="3" rows="1" columns="5"> <features tabularvalignment="middle"> <column alignment="center" valignment="top"> <column alignment="center" valignment="top"> <column alignment="center" valignment="top"> <column alignment="center" valignment="top"> <column alignment="center" valignment="top"> <row> <cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout い \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout ろ \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout は \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout に \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout ほ \end_layout \end_inset </cell> </row> </lyxtabular> \end_inset \end_layout \end_inset \end_layout \begin_layout Section キャプションの配置 \begin_inset Index idx status collapsed \begin_layout Plain Layout きゃぷしょん@キャプション ! はいち@配置 \end_layout \end_inset \begin_inset Index idx status collapsed \begin_layout Plain Layout ふろーと@フロート ! きゃぷしょんのはいち@キャプションの配置 \end_layout \end_inset \begin_inset CommandInset label LatexCommand label name "sec:キャプションの配置" \end_inset \end_layout \begin_layout Standard 通常,キャプションの配置原則は, \end_layout \begin_layout Description 図の場合: キャプションを図の下に置く \end_layout \begin_layout Description 表の場合: キャプションを表の上に置く \end_layout \begin_layout Standard という風になっています.\SpecialChar LaTeX の標準クラスでは,キャプションを表の上に置くことは,残念ながらサポートされていません.したがって, \family sans article \family default ・ \family sans book \family default ・ \family sans letter \family default ・ \family sans report \family default といった文書クラスを使用している時には,キャプションと表の間に余白が置かれなくなってしまいます.本来あるべき余白を挿入するには,お使いの文書プリアンブルでLaT eXパッケージ \series bold caption \series default を読み込むコマンドに \end_layout \begin_layout Standard \series bold tableposition=top \end_layout \begin_layout Standard というオプションを追加してください \begin_inset Foot status collapsed \begin_layout Plain Layout \series bold caption \series default パッケージについての詳細な情報は,第 \begin_inset CommandInset ref LatexCommand ref reference "sec:キャプションの書式設定" \end_inset 節をご覧ください. \end_layout \end_inset . \series bold KOMA-script \series default \begin_inset Index idx status collapsed \begin_layout Plain Layout \SpecialChar LaTeX ぱっけーじ@\SpecialChar LaTeX パッケージ ! KOMA-script \end_layout \end_inset 文書クラス( \family sans article (KOMA-script) \family default ・ \family sans book (KOMA-script) \family default ・ \family sans letter (KOMA-script) \family default ・ \family sans report (KOMA-script) \family default \begin_inset space \thinspace{} \end_inset )をお使いの場合には, \series bold caption \series default パッケージにオプションを与える代わりに,文書クラスオプション \end_layout \begin_layout Standard \series bold captions=tableheading \end_layout \begin_layout Standard を設定することもできます \begin_inset Foot status collapsed \begin_layout Plain Layout このオプションは本文書で使用されています. \end_layout \end_inset . \end_layout \begin_layout Standard KOMA-Script文書クラスの文書では,キャプションを右クリックして,文脈依存メニューから,これが図表の上または下に来るべきキャプションかを指定することもで きます.これによって,文書全体のキャプション配置指定にかかわらず,特定のキャプションの配置を変えることができます.表 \begin_inset CommandInset ref LatexCommand ref reference "tab:指定付きキャプション" \end_inset は,キャプションは,\SpecialChar LyX 中では上に置かれているけれども,表の下に来るように指定されている例です.比較のために,表 \begin_inset CommandInset ref LatexCommand ref reference "tab:標準表" \end_inset のキャプションでは,指定が為されていません. \end_layout \begin_layout Standard \begin_inset Float table wide false sideways false status open \begin_layout Plain Layout \begin_inset Caption Below \begin_layout Plain Layout \begin_inset CommandInset label LatexCommand label name "tab:指定付きキャプション" \end_inset 表下に来るように指定されたキャプション \end_layout \end_inset \end_layout \begin_layout Plain Layout \align center \begin_inset Tabular <lyxtabular version="3" rows="3" columns="3"> <features tabularvalignment="middle"> <column alignment="center" valignment="top" width="0pt"> <column alignment="center" valignment="top" width="0pt"> <column alignment="center" valignment="top" width="0pt"> <row> <cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 1 \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 2 \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 3 \end_layout \end_inset </cell> </row> <row> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 森嶋 \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 宇沢 \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 二階堂 \end_layout \end_inset </cell> </row> <row> <cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \begin_inset Formula $\int x^{2}dx$ \end_inset \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \begin_inset Formula $\left[\begin{array}{cc} a & b\\ c & d \end{array}\right]$ \end_inset \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \begin_inset Formula $1+1=2$ \end_inset \end_layout \end_inset </cell> </row> </lyxtabular> \end_inset \end_layout \end_inset \end_layout \begin_layout Standard \begin_inset Float table wide false sideways false status open \begin_layout Plain Layout \begin_inset Caption Standard \begin_layout Plain Layout \begin_inset CommandInset label LatexCommand label name "tab:標準表" \end_inset 標準の表キャプション \end_layout \end_inset \end_layout \begin_layout Plain Layout \align center \begin_inset Tabular <lyxtabular version="3" rows="3" columns="3"> <features tabularvalignment="middle"> <column alignment="center" valignment="top" width="0pt"> <column alignment="center" valignment="top" width="0pt"> <column alignment="center" valignment="top" width="0pt"> <row> <cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 1 \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 2 \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 3 \end_layout \end_inset </cell> </row> <row> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 森嶋 \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 宇沢 \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 二階堂 \end_layout \end_inset </cell> </row> <row> <cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \begin_inset Formula $\int x^{2}dx$ \end_inset \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \begin_inset Formula $\left[\begin{array}{cc} a & b\\ c & d \end{array}\right]$ \end_inset \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \begin_inset Formula $1+1=2$ \end_inset \end_layout \end_inset </cell> </row> </lyxtabular> \end_inset \end_layout \end_inset \end_layout \begin_layout Standard \begin_inset VSpace bigskip \end_inset また,キャプションは,図表の横に置くこともできます.これを実現するには,文書プリアンブルに \end_layout \begin_layout Standard \series bold \backslash usepackage[option]{sidecap} \end_layout \begin_layout Standard という行を入れて,\SpecialChar LaTeX パッケージ \series bold sidecap \series default \begin_inset Index idx status collapsed \begin_layout Plain Layout \SpecialChar LaTeX ぱっけーじ@\SpecialChar LaTeX パッケージ ! sidecap \end_layout \end_inset を読み込まなくてはなりません.オプションを与えなければ,ページの外側余白の側に—偶数ページでは右側,奇数頁では左側に—キャプションが置かれます. \series bold innercaption \series default オプションを与えれば,内側余白側に配置を変更することができます.配置をつねに右側ないし左側に来るように強制するには, \series bold rightcaption \series default ないし \series bold leftcaption \series default オプションを用います. \end_layout \begin_layout Standard \begin_inset ERT status collapsed \begin_layout Plain Layout \backslash ifsidecap \end_layout \end_inset \begin_inset Note Note status open \begin_layout Plain Layout 以下の部分は,\SpecialChar LaTeX パッケージ \series bold sidecap \series default が導入されているときのみ表示されます. \end_layout \end_inset \end_layout \begin_layout Standard \SpecialChar LyX でフロートのキャプションを横に配置するには,以下のコマンド群を文書プリアンブルに追加する必要があります. \end_layout \begin_layout Standard \noindent \begin_inset CommandInset line LatexCommand rule offset "0.5ex" width "100line%" height "1pt" \end_inset \end_layout \begin_layout Standard \series bold \backslash newcommand{ \backslash TabBesBeg}[1][1.0]{% \begin_inset Newline newline \end_inset \begin_inset Phantom HPhantom status open \begin_layout Plain Layout \begin_inset space ~ \end_inset \end_layout \end_inset \backslash let \backslash MyTable \backslash table \begin_inset Newline newline \end_inset \begin_inset Phantom HPhantom status open \begin_layout Plain Layout \series medium \begin_inset space ~ \end_inset \end_layout \end_inset \backslash let \backslash MyEndtable \backslash endtable \begin_inset Newline newline \end_inset \begin_inset Phantom HPhantom status open \begin_layout Plain Layout \series medium \begin_inset space ~ \end_inset \end_layout \end_inset \backslash renewenvironment{table}[1]{ \backslash begin{SCtable}[#1]##1}{ \backslash end{SCtable}}} \end_layout \begin_layout Standard \series bold \backslash newcommand{ \backslash TabBesEnd}{% \begin_inset Newline newline \end_inset \begin_inset Phantom HPhantom status open \begin_layout Plain Layout \begin_inset space ~ \end_inset \end_layout \end_inset \backslash let \backslash table \backslash MyTable \begin_inset Newline newline \end_inset \begin_inset Phantom HPhantom status open \begin_layout Plain Layout \begin_inset space ~ \end_inset \end_layout \end_inset \backslash let \backslash endtable \backslash MyEndtable \end_layout \begin_layout Standard \series bold \backslash newcommand{ \backslash FigBesBeg}[1][1.0]{% \begin_inset Newline newline \end_inset \begin_inset Phantom HPhantom status open \begin_layout Plain Layout \begin_inset space ~ \end_inset \end_layout \end_inset \backslash let \backslash MyFigure \backslash figure \begin_inset Newline newline \end_inset \begin_inset Phantom HPhantom status open \begin_layout Plain Layout \begin_inset space ~ \end_inset \end_layout \end_inset \backslash let \backslash MyEndfigure \backslash endfigure \begin_inset Newline newline \end_inset \begin_inset Phantom HPhantom status open \begin_layout Plain Layout \begin_inset space ~ \end_inset \end_layout \end_inset \backslash renewenvironment{figure}[1]{ \backslash begin{SCfigure}[#1]##1}{ \backslash end{SCfigure}}} \end_layout \begin_layout Standard \series bold \backslash newcommand{ \backslash FigBesEnd}{% \begin_inset Newline newline \end_inset \begin_inset Phantom HPhantom status open \begin_layout Plain Layout \begin_inset space ~ \end_inset \end_layout \end_inset \backslash let \backslash figure \backslash MyFigure \begin_inset Newline newline \end_inset \begin_inset Phantom HPhantom status open \begin_layout Plain Layout \begin_inset space ~ \end_inset \end_layout \end_inset \backslash let \backslash endfigure \backslash MyEndfigure} \end_layout \begin_layout Standard \noindent \begin_inset CommandInset line LatexCommand rule offset "0.5ex" width "100line%" height "1pt" \end_inset \end_layout \begin_layout Standard これらのコマンドは,キャプションが脇に来るようにフロートを再定義することを可能にするものです.図フロートの場合は, \end_layout \begin_layout Standard \series bold \backslash FigBesBeg \end_layout \begin_layout Standard というコマンドを,フロートの前に\SpecialChar TeX コードで入れてください.そして,元のフロート定義に戻したいところで, \end_layout \begin_layout Standard \series bold \backslash FigBesEnd \end_layout \begin_layout Standard という\SpecialChar TeX コードを入れてください. \end_layout \begin_layout Standard 表フロートに対しては,対応するコマンド \end_layout \begin_layout Standard \series bold \backslash TabBesBeg \series default および \series bold \backslash TabBesEnd \end_layout \begin_layout Standard を使用してください.図 \begin_inset CommandInset ref LatexCommand ref reference "fig:図横キャプション" \end_inset と表 \begin_inset CommandInset ref LatexCommand ref reference "tab:表横キャプション" \end_inset がキャプションを脇に設定した例です. \end_layout \begin_layout Standard これらの例において,表フロートの場合には,キャプションの文章がフロート上部に表示され,図フロートではフロート下部に表示されることが確認いただけると思います.これ を変更するには,文書プリアンブルかフロート直前に,\SpecialChar TeX コードとして \end_layout \begin_layout Standard \series bold \backslash sidecaptionvpos{フロート型}{配置} \end_layout \begin_layout Standard というコマンドを使用します.ここで「フロート型」は \family sans figure \family default か \family sans table \family default であり,「配置」は,上揃えの場合はtopの \end_layout \begin_layout Standard 「 \family sans t \family default 」,中央揃えの場合はcenterの「 \family sans c \family default 」,下揃えの場合はbottomの「 \family sans b \family default 」のいずれかになります.たとえば,図フロートのキャプションを縦方向中央揃えとしたい場合には, \end_layout \begin_layout Standard \series bold \backslash sidecaptionvpos{figure}{c} \end_layout \begin_layout Standard というコマンドを使用します.これは,図 \begin_inset CommandInset ref LatexCommand ref reference "fig:図横キャプション-2" \end_inset で使用されています. \end_layout \begin_layout Standard \begin_inset VSpace medskip \end_inset \end_layout \begin_layout Standard キャプション幅の既定値は,画像幅ないし表幅です.しかし,表 \begin_inset CommandInset ref LatexCommand ref reference "tab:表横キャプション" \end_inset のように幅狭の表では,これではキャプションの幅が狭くなりすぎます.キャプション幅を増やすには,画像幅ないし表幅に掛ける因数を指定することができます.指定した幅で は,キャプションがページ余白ないし段余白に突き出てしまうような場合は,キャプション幅は自動的に再計算してくれます. \emph on 因数 \emph default は, \end_layout \begin_layout Standard \series bold \backslash FigBesBeg[因数] \end_layout \begin_layout Standard のように, \series bold \backslash FigBesBeg \series default への非必須引数として与えることもできますし, \series bold \backslash FigBesBeg \series default の定義中で \series bold 1.0 \series default を他の値に変更することもできます.表 \begin_inset CommandInset ref LatexCommand ref reference "tab:図横幅広" \end_inset では,因子5が指定されています. \end_layout \begin_layout Standard \begin_inset Note Greyedout status open \begin_layout Plain Layout \series bold 【註】 \series default キャプションを横につけたフロートでは,フロート配置オプションの \family sans 何としても現在地に置く \family default は, \series bold sidecap \series default がサポートしていないので,使用することができません.. \end_layout \end_inset \end_layout \begin_layout Standard \begin_inset VSpace medskip \end_inset \series bold sidecap \series default パッケージについての詳細は, \begin_inset CommandInset citation LatexCommand cite key "sidecap" literal "true" \end_inset の説明書をご参照ください. \end_layout \begin_layout Standard \begin_inset Note Greyedout status open \begin_layout Plain Layout \series bold 【註】 \series default 第 \begin_inset CommandInset ref LatexCommand ref reference "subsec:参照位置" \end_inset 節に説明がある\SpecialChar LaTeX パッケージ \series bold hypcap \series default \begin_inset Index idx status collapsed \begin_layout Plain Layout \SpecialChar LaTeX ぱっけーじ@\SpecialChar LaTeX パッケージ ! hypcap \end_layout \end_inset は,キャプションを脇に表示したフロートに対しては,効果を持ちません. \end_layout \end_inset \end_layout \begin_layout Standard \begin_inset Note Greyedout status open \begin_layout Plain Layout \series bold 【訳註】 \series default \SpecialChar LaTeX パッケージ \series bold sidecap \series default \begin_inset Index idx status collapsed \begin_layout Plain Layout \SpecialChar LaTeX ぱっけーじ@\SpecialChar LaTeX パッケージ ! sidecap \end_layout \end_inset は,p\SpecialChar LaTeX と互換性がなく,特に文書全体の見出しのフォントが適切に表示できなくなってしまうため,本日本語訳では当該パッケージを使用していません.その使用例については, 取扱説明書『 \emph on 埋め込み機能篇 \emph default 』(つまりこの文書)の\SpecialChar LyX 文書本体を見るか,出力結果を見たい場合には英語版を出力するようにしてください. \end_layout \end_inset \begin_inset ERT status collapsed \begin_layout Plain Layout \backslash FigBesBeg \end_layout \end_inset \end_layout \begin_layout Standard \begin_inset Float figure wide false sideways false status open \begin_layout Plain Layout \begin_inset Graphics filename ../clipart/3D-structure-distort.pdf scale 50 scaleBeforeRotation \end_inset \end_layout \begin_layout Plain Layout \begin_inset Caption Standard \begin_layout Plain Layout \begin_inset CommandInset label LatexCommand label name "fig:図横キャプション" \end_inset これは図の横にあるキャプションです. \end_layout \end_inset \end_layout \end_inset \end_layout \begin_layout Standard \begin_inset ERT status collapsed \begin_layout Plain Layout \backslash FigBesEnd \end_layout \end_inset \end_layout \begin_layout Standard \begin_inset ERT status collapsed \begin_layout Plain Layout \backslash TabBesBeg \end_layout \end_inset \end_layout \begin_layout Standard \begin_inset Float table wide false sideways false status open \begin_layout Plain Layout \begin_inset Caption Standard \begin_layout Plain Layout \begin_inset CommandInset label LatexCommand label name "tab:表横キャプション" \end_inset これは表の横にあるキャプションです. \end_layout \end_inset \end_layout \begin_layout Plain Layout \begin_inset Tabular <lyxtabular version="3" rows="4" columns="5"> <features tabularvalignment="middle"> <column alignment="center" valignment="top"> <column alignment="center" valignment="top"> <column alignment="center" valignment="top"> <column alignment="center" valignment="top"> <column alignment="center" valignment="top"> <row> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout い \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout ろ \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout は \end_layout \end_inset </cell> </row> <row> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout に \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout ほ \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \end_layout \end_inset </cell> </row> <row> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout へ \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout と \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout ち \end_layout \end_inset </cell> </row> <row> <cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout り \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout ぬ \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \end_layout \end_inset </cell> </row> </lyxtabular> \end_inset \end_layout \end_inset \end_layout \begin_layout Standard \begin_inset ERT status collapsed \begin_layout Plain Layout \backslash TabBesEnd \end_layout \end_inset \end_layout \begin_layout Standard \begin_inset ERT status collapsed \begin_layout Plain Layout \backslash FigBesBeg \end_layout \end_inset \begin_inset ERT status collapsed \begin_layout Plain Layout \backslash sidecaptionvpos{figure}{c} \end_layout \end_inset \begin_inset Float figure wide false sideways false status open \begin_layout Plain Layout \begin_inset Graphics filename ../clipart/3D-structure-distort.pdf scale 50 scaleBeforeRotation \end_inset \end_layout \begin_layout Plain Layout \begin_inset Caption Standard \begin_layout Plain Layout \begin_inset CommandInset label LatexCommand label name "fig:図横キャプション-2" \end_inset これは図の横にある縦方向中央揃えのキャプションです. \end_layout \end_inset \end_layout \end_inset \end_layout \begin_layout Standard \begin_inset ERT status collapsed \begin_layout Plain Layout \backslash FigBesEnd \end_layout \end_inset \end_layout \begin_layout Standard \begin_inset ERT status collapsed \begin_layout Plain Layout \backslash TabBesBeg[5] \end_layout \end_inset \end_layout \begin_layout Standard \begin_inset Float table wide false sideways false status open \begin_layout Plain Layout \begin_inset Caption Standard \begin_layout Plain Layout \begin_inset CommandInset label LatexCommand label name "tab:図横幅広" \end_inset これは表 \begin_inset CommandInset ref LatexCommand ref reference "tab:表横キャプション" \end_inset よりも幅広のキャプションです \end_layout \end_inset \end_layout \begin_layout Plain Layout \begin_inset Tabular <lyxtabular version="3" rows="4" columns="5"> <features tabularvalignment="middle"> <column alignment="center" valignment="top"> <column alignment="center" valignment="top"> <column alignment="center" valignment="top"> <column alignment="center" valignment="top"> <column alignment="center" valignment="top"> <row> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout a \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout b \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout c \end_layout \end_inset </cell> </row> <row> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout d \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout e \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \end_layout \end_inset </cell> </row> <row> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout f \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout g \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout h \end_layout \end_inset </cell> </row> <row> <cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout i \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout j \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \end_layout \end_inset </cell> </row> </lyxtabular> \end_inset \end_layout \end_inset \end_layout \begin_layout Standard \begin_inset ERT status collapsed \begin_layout Plain Layout \backslash TabBesEnd \end_layout \end_inset \end_layout \begin_layout Standard \begin_inset ERT status collapsed \begin_layout Plain Layout \backslash else \end_layout \end_inset \begin_inset Note Note status open \begin_layout Plain Layout 以下の部分は,\SpecialChar LaTeX パッケージ \series bold sidecap \series default が導入されていないときのみ表示されます. \end_layout \end_inset \end_layout \begin_layout Standard 本節の残りの部分を出力で表示するには,\SpecialChar LaTeX パッケージ \series bold sidecap \series default を導入する必要があります. \end_layout \begin_layout Standard \begin_inset ERT status collapsed \begin_layout Plain Layout \backslash fi \end_layout \end_inset \end_layout \begin_layout Section フロート一覧 \begin_inset Index idx status collapsed \begin_layout Plain Layout ふろーと@フロート ! ふろーといちらん@フロート一覧 \end_layout \end_inset \end_layout \begin_layout Standard 文書中の各節が列挙されたものである目次と同様,文書中の図など,すべてのフロート型に一覧があります.これらは, \family sans 挿入\SpecialChar menuseparator 一覧/目次 \family default メニューで挿入することができます. \end_layout \begin_layout Standard 一覧の見出しは,フロートのキャプションないし短縮タイトル,フロート番号,これらが文書中で現れるページ番号で構成されます. \end_layout \begin_layout Standard 本文書の終わりに,図一覧と表一覧があります. \end_layout \begin_layout Chapter 註釈 \end_layout \begin_layout Section \SpecialChar LyX 註釈 \begin_inset Index idx status collapsed \begin_layout Plain Layout ちゅうしゃく@註釈 ! \SpecialChar LyX のーと@\SpecialChar LyX ノート \end_layout \end_inset \end_layout \begin_layout Standard 註釈は,ツールバーボタン \family sans \begin_inset Info type "icon" arg "note-insert" \end_inset \family default か, \family sans 挿入\SpecialChar menuseparator 註釈 \family default メニューで挿入することができます.註釈には,以下の三つの型があります. \end_layout \begin_layout Description \SpecialChar LyX 註釈 この註釈型は,内部用途の註釈で出力には現れません.註釈ボックスは,以下のように表示されます. \begin_inset Newline newline \end_inset \begin_inset Newline newline \end_inset \begin_inset Graphics filename clipart/LyXNoteImage.png display false scale 50 scaleBeforeRotation \end_inset \begin_inset Note Note status open \begin_layout Plain Layout これは,出力には現れない註釈ボックスに書かれた文章です. \end_layout \end_inset \end_layout \begin_layout Description コメント この註釈も出力には現れませんが, \family sans ファイル\SpecialChar menuseparator 書き出し\SpecialChar menuseparator LaTeX \begin_inset space ~ \end_inset (pdflatex) / (平文) \family default メニューを使って文書を\SpecialChar LaTeX にエクスポートする際には,\SpecialChar LaTeX コメントとして出力されます.註釈ボックスは,以下のように表示されます. \begin_inset Newline newline \end_inset \begin_inset Newline newline \end_inset \begin_inset Graphics filename clipart/CommentNoteImage.png display false scale 50 scaleBeforeRotation \end_inset \begin_inset Note Comment status open \begin_layout Plain Layout これは,\SpecialChar LaTeX ファイルのコメントのみに現れる註釈ボックスに書かれた文章です. \end_layout \end_inset \end_layout \begin_layout Description 淡色表示 この註釈は,薄灰色の文章として出力に現れます.註釈ボックスは,以下のように表示されます. \begin_inset Newline newline \end_inset \begin_inset Newline newline \end_inset \begin_inset Graphics filename clipart/GreyedOutNoteImage.png display false scale 50 scaleBeforeRotation \end_inset \begin_inset Newline newline \end_inset \begin_inset ERT status collapsed \begin_layout Plain Layout \backslash renewenvironment{lyxgreyedout} \end_layout \begin_layout Plain Layout { \backslash textcolor[gray]{0.8} \backslash bgroup}{ \backslash egroup} \end_layout \end_inset \begin_inset Note Greyedout status open \begin_layout Plain Layout これは,出力に薄灰色の文章として現れるコメントに書かれた文章 \begin_inset Foot status collapsed \begin_layout Plain Layout これは,淡色註釈内に脚註を用いた例です. \end_layout \end_inset です. \end_layout \end_inset \begin_inset ERT status collapsed \begin_layout Plain Layout \backslash renewenvironment{lyxgreyedout} \end_layout \begin_layout Plain Layout { \backslash textcolor{blue} \backslash bgroup}{ \backslash egroup} \end_layout \end_inset \begin_inset Note Note status open \begin_layout Plain Layout 以下に述べられているように,淡色註釈は,青文字で表示されるよう本文書のプリアンブルで再定義されているため,ここの淡色註釈は,\SpecialChar LyX 本来の定義で表示されるように再定義さ れています. \end_layout \end_inset \begin_inset Newline newline \end_inset \begin_inset Newline newline \end_inset この例から分かるように,淡色註釈の最初の行は少し字下げされるほか,淡色註釈には脚註を入れることができます. \end_layout \begin_layout Standard \begin_inset VSpace bigskip \end_inset 註釈を挿入するのにツールバーボタン \family sans \begin_inset Info type "icon" arg "note-insert" \end_inset \family default を使用すると, \family sans \SpecialChar LyX 註釈 \family default が挿入されます.註釈ボックスを右クリックすれば,五つの註釈型を切り替えることができます.既存の平文を註釈に変えるには,平文を選択して,註釈ツールバーボタンをクリ ックしてください.註釈を平文に変更するには,カーソルを註釈の先頭に置いてBackspaceキーを押すか,カーソルを註釈の最後に置いてDeleteキーを押してくだ さい. \end_layout \begin_layout Standard \begin_inset VSpace bigskip \end_inset 淡色註釈の文字色は, \family sans 文書\SpecialChar menuseparator 設定\SpecialChar menuseparator 色 \family default メニューで変更することができます. \end_layout \begin_layout Section 脚註 \begin_inset CommandInset label LatexCommand label name "sec:脚注" \end_inset \begin_inset Index idx status collapsed \begin_layout Plain Layout ちゅうしゃく@註釈 ! きゃくちゅう@脚註 \end_layout \end_inset \begin_inset Index idx status collapsed \begin_layout Plain Layout きゃくちゅう@脚註 \end_layout \end_inset \end_layout \begin_layout Standard 脚註は,ツールバーボタン \family sans \begin_inset Info type "icon" arg "footnote-insert" \end_inset \family default か, \family sans 挿入\SpecialChar menuseparator 脚註 \family default メニューを使って挿入することができます.すると,脚註文を挿入したところに, \begin_inset Graphics filename clipart/footnote.png scale 95 scaleBeforeRotation \end_inset のような脚註ボックスが現れます.もし既存の文章を脚註に変えたいならば,その文章を選択して,脚註ツールバーボタンをクリックしてください.脚註を平文に変えるには,カ ーソルが脚註の先頭にある時にBackspaceキーを押すか,カーソルが脚註の最後にある時にDeleteキーを押します. \end_layout \begin_layout Standard これが脚註の例です \begin_inset Foot status collapsed \begin_layout Plain Layout \begin_inset CommandInset label LatexCommand label name "fn:これは脚注の一例" \end_inset これは脚註の一例です. \end_layout \end_inset . \begin_inset ERT status collapsed \begin_layout Plain Layout \backslash newcounter{MyRepeatFoot} \end_layout \begin_layout Plain Layout \backslash setcounter{MyRepeatFoot}{ \backslash thefootnote} \end_layout \end_inset \end_layout \begin_layout Standard 出力に於いては,脚註は,文中の脚註ボックスを置いた位置に上付き数字として表示され,脚註文は現ページ底部に置かれます.脚註番号は\SpecialChar LaTeX が計算を行い,連番が付けられます. 脚註番号が章毎にリセットされるか否かは,使用する文書クラスに依ります. \end_layout \begin_layout Standard 脚註もフロート同様,参照することができます.脚註にラベルを挿入し,第 \begin_inset CommandInset ref LatexCommand ref reference "sec:フロートの参照" \end_inset 節に説明されているようにして,本文中でこのラベルを相互参照してください. \begin_inset Newline newline \end_inset これは脚註 \begin_inset CommandInset ref LatexCommand ref reference "fn:これは脚注の一例" \end_inset の相互参照です. \end_layout \begin_layout Standard \begin_inset VSpace defskip \end_inset 表題環境における脚註は,通常,記号付きで付番はされず,複数の段落を含むことはできません.たとえば,この文書の表題の脚註をご覧ください. \end_layout \begin_layout Standard \begin_inset VSpace defskip \end_inset \end_layout \begin_layout Standard \SpecialChar LaTeX では,技術的要因により,表中の脚註は印字されません.しかし,それを行うには他の方法があり,まず脚註の代わりに\SpecialChar TeX コードで \series bold \backslash footnotemark{} \series default コマンドを入れてください.脚註の本文は,表の後で\SpecialChar TeX コード \series bold \backslash footnotetext \series default コマンドの引数として入力します. \begin_inset Newline newline \end_inset 以下の表ではコマンド \begin_inset Newline newline \end_inset \series bold \backslash footnotetext{ \series default 出力される脚註の表 \series bold } \series default \begin_inset Newline newline \end_inset を用いています. \end_layout \begin_layout Standard \begin_inset Tabular <lyxtabular version="3" rows="2" columns="1"> <features tabularvalignment="middle"> <column alignment="center" valignment="top"> <row> <cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout これは例文です. \begin_inset Foot status open \begin_layout Plain Layout この脚註は出力されません! \end_layout \end_inset \end_layout \end_inset </cell> </row> <row> <cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout これは例文です. \begin_inset ERT status collapsed \begin_layout Plain Layout \backslash footnotemark{} \end_layout \end_inset \end_layout \end_inset </cell> </row> </lyxtabular> \end_inset \begin_inset ERT status collapsed \begin_layout Plain Layout \backslash footnotetext{ \end_layout \end_inset 出力される脚註の表 \begin_inset ERT status collapsed \begin_layout Plain Layout } \end_layout \end_inset \end_layout \begin_layout Standard 多頁表中の脚註は,第 \begin_inset CommandInset ref LatexCommand ref reference "subsec:多頁表での脚注" \end_inset 節で述べられています. \end_layout \begin_layout Standard ミニページ中の脚註は出力されますが,ミニボックスは頁中の頁のようなものなので,ボックス内に独立した連番として出力されます(ミニページについての詳細は,第 \begin_inset CommandInset ref LatexCommand ref reference "sec:ミニページ" \end_inset 節を参照).通常の脚註のように頁底部に出力されるミニページを得るには,やはり \series bold \backslash footnotemark{} \series default と \series bold \backslash footntoetext \series default による方法を用いてください. \end_layout \begin_layout Standard \begin_inset Box Frameless position "t" hor_pos "c" has_inner_box 1 inner_pos "t" use_parbox 0 use_makebox 0 width "100col%" special "none" height "1in" height_special "totalheight" thickness "0.4pt" separation "3pt" shadowsize "4pt" framecolor "black" backgroundcolor "none" status open \begin_layout Plain Layout これはミニページ中の例文です. \begin_inset Foot status open \begin_layout Plain Layout ミニページ中の脚註です. \end_layout \end_inset \end_layout \begin_layout Plain Layout これはミニページ中の例文です. \begin_inset ERT status collapsed \begin_layout Plain Layout \backslash footnotemark{} \end_layout \end_inset \end_layout \end_inset \end_layout \begin_layout Standard \begin_inset ERT status collapsed \begin_layout Plain Layout \backslash footnotetext{ \end_layout \end_inset ミニページ外の脚註です. \begin_inset ERT status collapsed \begin_layout Plain Layout } \end_layout \end_inset \begin_inset VSpace defskip \end_inset \end_layout \begin_layout Standard 毎回脚註本文を出力せずに,同じ脚註を何度か参照したい場合には,\SpecialChar TeX コードでコマンド \series bold \backslash footnotemark[番号] \series default を使用してください. \begin_inset Newline newline \end_inset 文章を書いている途中には,繰り返す脚註の数はわからないので,その番号は保存しておかなくてはなりません.以下の脚註例では,脚註 \begin_inset CommandInset ref LatexCommand ref reference "fn:これは脚注の一例" \end_inset の後に,\SpecialChar TeX コードで \end_layout \begin_layout Standard \series bold \backslash newcounter{MyRepeatFoot} \begin_inset Newline newline \end_inset \backslash setcounter{MyRepeatFoot}{ \backslash thefootnote} \end_layout \begin_layout Standard というコマンドを挿入しています.そして脚註マークは, \end_layout \begin_layout Standard \series bold \backslash footnotemark[ \backslash theMyRepeatFoot] \end_layout \begin_layout Standard で作成します. \end_layout \begin_layout Standard これは繰り返し脚註の例です. \begin_inset ERT status collapsed \begin_layout Plain Layout \backslash footnotemark[ \backslash theMyRepeatFoot] \end_layout \end_inset \end_layout \begin_layout Standard 直前の脚註を繰り返すには,脚註番号の保存を行わないで,直ちに \end_layout \begin_layout Standard \series bold \backslash footnotemark[ \backslash thefootnote] \end_layout \begin_layout Standard を使用してください. \end_layout \begin_layout Standard これは繰り返し脚註の例です. \begin_inset ERT status collapsed \begin_layout Plain Layout \backslash footnotemark[ \backslash thefootnote] \end_layout \end_inset \end_layout \begin_layout Subsection 脚註の付番 \begin_inset CommandInset label LatexCommand label name "subsec:脚注の付番" \end_inset \begin_inset Index idx status collapsed \begin_layout Plain Layout きゃくちゅう@脚註 ! ふばん@付番 \end_layout \end_inset \end_layout \begin_layout Standard 各節毎に脚註番号を1にリセットするには,文書プリアンブルに \end_layout \begin_layout Standard \series bold \backslash @addtoreset{footnote}{section} \end_layout \begin_layout Standard というコマンドを加えてください. \end_layout \begin_layout Standard \begin_inset VSpace bigskip \end_inset 以下のプリアンブルコマンドを使うと,脚註の付番様式を小文字ローマ数字に変更することができます. \end_layout \begin_layout Standard \series bold \backslash renewcommand{ \backslash thefootnote}{ \backslash roman{footnote}} \end_layout \begin_layout Standard \begin_inset ERT status collapsed \begin_layout Plain Layout \backslash renewcommand{ \backslash thefootnote}{ \backslash roman{footnote}} \end_layout \end_inset これは,ローマ数字を使った脚註です \begin_inset Foot status collapsed \begin_layout Plain Layout これは,ローマ数字を使った脚註の例です. \end_layout \end_inset . \end_layout \begin_layout Standard 付番様式を大文字ローマ数字に変更するには,上記コマンドの \series bold \backslash roman \series default を \series bold \backslash Roman \series default に置き換えてください.脚註を大文字または小文字ラテン「文字」で付番するには,それぞれ \series bold \backslash Alph \series default または \series bold \backslash alph \series default を使用してください.記号を使って付「番」するには, \series bold \backslash fnsymbol \series default を使ってください. \end_layout \begin_layout Standard \begin_inset Note Greyedout status open \begin_layout Plain Layout \series bold 【註】 \series default この付番方法には1文字しか使えないので,ラテン文字を使うと26個の脚註しか番号を振ることができません. \end_layout \end_inset \begin_inset Newline newline \end_inset \begin_inset Note Greyedout status open \begin_layout Plain Layout \series bold 【註】 \series default 記号を使うと9個の脚註しか番号を振ることができません. \end_layout \end_inset \end_layout \begin_layout Standard 付番様式を変更した後,既定様式に戻すには,上記コマンドの \series bold \backslash roman \series default を \series bold \backslash arabic \series default に置き換えて使用してください. \begin_inset ERT status collapsed \begin_layout Plain Layout \backslash renewcommand{ \backslash thefootnote}{ \backslash arabic{footnote}} \end_layout \end_inset \end_layout \begin_layout Standard \begin_inset VSpace bigskip \end_inset \end_layout \begin_layout Standard 脚註を「章番号.脚註番号」スキームで付番したいときには,使用中文書のプリアンブルに \end_layout \begin_layout Standard \series bold \backslash numberwithin{footnote}{chapter} \end_layout \begin_layout Standard というコマンドを加えてください. \series bold \backslash numberwithin \series default コマンドを使用できるようにするためには,文書設定の \family sans 数式オプション \family default タブで \family sans AMS \begin_inset space ~ \end_inset mathパッケージを使う \family default オプションを有効にしてください. \end_layout \begin_layout Standard \begin_inset ERT status collapsed \begin_layout Plain Layout \backslash numberwithin{footnote}{chapter} \end_layout \end_inset これは,脚註のもう一つの例です \series bold \begin_inset Foot status open \begin_layout Plain Layout \series bold これは, \series default 「章番号.脚註番号」スキームで番号を振られた脚註です. \end_layout \end_inset \series default . \begin_inset ERT status collapsed \begin_layout Plain Layout \backslash renewcommand{ \backslash thefootnote}{ \backslash arabic{footnote}} \end_layout \end_inset \end_layout \begin_layout Standard \begin_inset Note Greyedout status open \begin_layout Plain Layout \series bold 【註】 \backslash numberwithin \series default は,脚註番号を常にアラビア数字で出力します.それよりも前にアラビア数字以外に再定義されたものは無効となります. \end_layout \end_inset \end_layout \begin_layout Standard また,例えば「章番号. \backslash Roman{footnote}」スキームを得るには, \series bold \backslash numberwithin \series default の代わりに以下のコマンドを使用してください. \end_layout \begin_layout Standard \series bold \backslash renewcommand{ \backslash thefootnote}{ \backslash thechapter. \backslash Roman{footnote}} \end_layout \begin_layout Subsection 脚註の配置 \begin_inset Index idx status collapsed \begin_layout Plain Layout きゃくちゅう@脚註 ! はいち@配置 \end_layout \end_inset \end_layout \begin_layout Standard 同一ページに複数の脚註がある場合,それらはページ底部に縦方向の余白を空けることなく,並べられます.これを読みやすくするには,例えば以下のようなコマンドをプリアン ブルに足して,1.5 \begin_inset space \thinspace{} \end_inset mmの余白を追加することもできます. \end_layout \begin_layout Standard \series bold \backslash let \backslash myFoot \backslash footnote \begin_inset Newline newline \end_inset \backslash renewcommand{ \backslash footnote}[1]{ \backslash myFoot{#1 \backslash vspace{1.5mm}}} \end_layout \begin_layout Standard \begin_inset VSpace bigskip \end_inset 二段組文書では,脚註は各段底部に表示されます(図 \begin_inset CommandInset ref LatexCommand ref reference "fig:標準的脚注配置" \end_inset ).図 \begin_inset CommandInset ref LatexCommand ref reference "fig:ftnright脚注配置" \end_inset のように,脚註を右段底部にのみ表示するようにするには,文書プリアンブルに \end_layout \begin_layout Standard \series bold \backslash usepackage{ftnright} \end_layout \begin_layout Standard というコマンドを書いて,\SpecialChar LaTeX パッケージ \series bold ftnright \series default \begin_inset Index idx status collapsed \begin_layout Plain Layout \SpecialChar LaTeX ぱっけーじ@\SpecialChar LaTeX パッケージ ! ftnright \end_layout \end_inset を読み込みます. \begin_inset Float figure placement !h wide false sideways false status open \begin_layout Plain Layout \noindent \align center \begin_inset Box Boxed position "t" hor_pos "c" has_inner_box 0 inner_pos "t" use_parbox 0 use_makebox 0 width "" special "none" height "1in" height_special "totalheight" thickness "0.4pt" separation "3pt" shadowsize "4pt" framecolor "black" backgroundcolor "none" status open \begin_layout Plain Layout \begin_inset Graphics filename ../clipart/without_fntright.pdf width 100col% scaleBeforeRotation \end_inset \end_layout \end_inset \end_layout \begin_layout Plain Layout \begin_inset Caption Standard \begin_layout Plain Layout \begin_inset CommandInset label LatexCommand label name "fig:標準的脚注配置" \end_inset 二段組文書の標準的な脚註配置 \end_layout \end_inset \end_layout \end_inset \end_layout \begin_layout Standard \begin_inset Float figure placement !h wide false sideways false status open \begin_layout Plain Layout \noindent \align center \begin_inset Box Boxed position "t" hor_pos "c" has_inner_box 0 inner_pos "t" use_parbox 0 use_makebox 0 width "" special "none" height "1in" height_special "totalheight" thickness "0.4pt" separation "3pt" shadowsize "4pt" framecolor "black" backgroundcolor "none" status open \begin_layout Plain Layout \begin_inset Graphics filename ../clipart/with_fntright.pdf width 100col% scaleBeforeRotation \end_inset \end_layout \end_inset \end_layout \begin_layout Plain Layout \begin_inset Caption Standard \begin_layout Plain Layout \begin_inset CommandInset label LatexCommand label name "fig:ftnright脚注配置" \end_inset \SpecialChar LaTeX パッケージ \series bold ftnright \series default を使用したときの二段組文書の脚註配置 \end_layout \end_inset \end_layout \end_inset \end_layout \begin_layout Standard \begin_inset VSpace bigskip \end_inset 科学的文献においては,図 \begin_inset CommandInset ref LatexCommand ref reference "fig:後註" \end_inset のように,節の末尾に別段落を設けて,脚註をまとめて出力することも普通に行われます.これは「後註 \begin_inset Index idx status collapsed \begin_layout Plain Layout こちゆう@後註 \end_layout \end_inset 」と呼ばれるものです.文書中で脚註の代わりに後註を使用するには, \family sans 文書\SpecialChar menuseparator 設定\SpecialChar menuseparator モジュール \family default メニューで \family sans 脚註から後註へ \family default を読み込んでください.まとめた注を出力するには,節ないし章末に\SpecialChar TeX コードで \end_layout \begin_layout Standard \series bold \backslash theendnotes \end_layout \begin_layout Standard というコマンドを挿入してください. \end_layout \begin_layout Standard \begin_inset Float figure wide false sideways false status open \begin_layout Plain Layout \align center \begin_inset Box Boxed position "t" hor_pos "c" has_inner_box 0 inner_pos "t" use_parbox 0 use_makebox 0 width "" special "none" height "1in" height_special "totalheight" thickness "0.4pt" separation "3pt" shadowsize "4pt" framecolor "black" backgroundcolor "none" status open \begin_layout Plain Layout \begin_inset Graphics filename ../clipart/endnotes.pdf width 100col% scaleBeforeRotation \end_inset \end_layout \end_inset \end_layout \begin_layout Plain Layout \begin_inset Caption Standard \begin_layout Plain Layout \begin_inset CommandInset label LatexCommand label name "fig:後註" \end_inset 後註 – 注を節ないし章末に別段落として印字します. \end_layout \end_inset \end_layout \end_inset \end_layout \begin_layout Standard \begin_inset VSpace medskip \end_inset 後註の段落見出しは,文書言語に自動的に翻訳されることはありませんので,手動で翻訳しなくてはなりません.プリアンブルで \end_layout \begin_layout Standard \series bold \backslash renewcommand{ \backslash notesname}{Anmerkungen} \end_layout \begin_layout Standard というコマンドを使えば,既定の英語名「Notes」を独語訳「Anmerkungen」に変えることができます. \end_layout \begin_layout Standard \begin_inset VSpace medskip \end_inset 第 \begin_inset CommandInset ref LatexCommand ref reference "subsec:脚注の付番" \end_inset 節で述べた脚註の付番と同様に,後註の付番も変更することができます. \series bold \backslash thefootnote \series default コマンドの代わりに \series bold \backslash theendnote \series default を用いてください.後註番号をリセットするには,第 \begin_inset CommandInset ref LatexCommand ref reference "subsec:脚注の付番" \end_inset 節で述べたコマンド \series bold \backslash @addtoreset \series default の,パラメータ \series bold footnote \series default を \series bold endnote \series default に変えて,使用してください. \end_layout \begin_layout Standard 後註の印だけを作成するには,第 \begin_inset CommandInset ref LatexCommand ref reference "sec:脚注" \end_inset 節で説明した \series bold \backslash footnotemark \series default コマンドの代わりに, \series bold \backslash endnotemark[番号] \series default コマンドを使用してください. \end_layout \begin_layout Standard \begin_inset VSpace bigskip \end_inset 脚註はページ余白に置くこともでき,脚註文の揃えも変更することができます.詳細は,\SpecialChar LaTeX パッケージ \series bold footmisc \series default \begin_inset Index idx status collapsed \begin_layout Plain Layout \SpecialChar LaTeX ぱっけーじ@\SpecialChar LaTeX パッケージ ! footmisc \end_layout \end_inset \begin_inset CommandInset citation LatexCommand cite key "footmisc" literal "true" \end_inset を参照してください. \end_layout \begin_layout Standard 脚註の整形にまつわるその他多くの話題が,\SpecialChar LaTeX 関連書籍 \begin_inset CommandInset citation LatexCommand cite key "latexcompanion,latexguide,latexbook" literal "true" \end_inset に載っています. \series bold KOMA-Script \series default \begin_inset Index idx status collapsed \begin_layout Plain Layout \SpecialChar LaTeX ぱっけーじ@\SpecialChar LaTeX パッケージ ! KOMA-Script \end_layout \end_inset 文書クラスを使用している場合には,すべての脚註設定を,クラス固有のコマンドで調節することができます( \begin_inset CommandInset citation LatexCommand cite key "KOMA-Script" literal "true" \end_inset 参照). \end_layout \begin_layout Section 傍註 \begin_inset Index idx status collapsed \begin_layout Plain Layout ちゅうしゃく@註釈 ! ぼうちゅう@傍註 \end_layout \end_inset \end_layout \begin_layout Standard \SpecialChar LyX 内において,傍註註釈は,脚註のような外見と挙動を示します.これは \family sans 挿入\SpecialChar menuseparator 傍註 \family default メニューかツールバーボタン \family sans \begin_inset Info type "icon" arg "marginalnote-insert" \end_inset \family default で挿入することができます.すると,紫字で「傍註」と書かれた灰色のボックスが現れて,そこに傍註文を入れることができます. \end_layout \begin_layout Standard 横にあるのが傍註です \begin_inset Marginal status open \begin_layout Plain Layout これは傍註文です. \end_layout \end_inset . \end_layout \begin_layout Standard 片面文書においては,傍註は右側に表示され,両面文書においては外側余白—偶数ページでは左側,奇数ページでは右側—に表示されます.傍註文は,外側余白の反対側に—注が 左余白に現れるときには右揃えに—寄せられます.傍註文の一行目は,傍註が挿入された文書箇所と同じ行に来るように配置されます. \end_layout \begin_layout Standard \begin_inset VSpace bigskip \end_inset 傍註を内側余白に置くには,傍註の前に\SpecialChar TeX コードで \end_layout \begin_layout Standard \series bold \backslash reversemarginpar \end_layout \begin_layout Standard というコマンドを書き加えてください.この新しい配置は,以後のすべての傍註に対して効力があります. \begin_inset ERT status collapsed \begin_layout Plain Layout \backslash reversemarginpar \end_layout \end_inset \begin_inset Marginal status open \begin_layout Plain Layout これは内側余白の傍註です. \end_layout \end_inset \series bold \begin_inset Newline newline \end_inset \series default \begin_inset Note Greyedout status open \begin_layout Plain Layout \series bold 【註】 \series default 内側余白には充分な空白がないことがよくあり,出力で傍註が正しく表示されないことがあります. \end_layout \end_inset \end_layout \begin_layout Standard 既定の配置に戻すには,\SpecialChar TeX コードで \end_layout \begin_layout Standard \series bold \backslash normalmarginpar \end_layout \begin_layout Standard というコマンドを書き加えてください. \begin_inset ERT status collapsed \begin_layout Plain Layout \backslash normalmarginpar \end_layout \end_inset \begin_inset Note Greyedout status open \begin_layout Plain Layout \series bold 【註】 \backslash reversemarginpar \series default コマンドが既に挿入されている段落内では,このコマンドは無視されます. \end_layout \end_inset \end_layout \begin_layout Standard \begin_inset VSpace bigskip \end_inset \begin_inset Marginal status open \begin_layout Plain Layout AVeryLongMarginParWord(とっても長い傍註段落中の単語)がハイフネートされない例. \end_layout \end_inset 第 \begin_inset CommandInset ref LatexCommand ref reference "subsec:複数行" \end_inset 節で述べられている事例と同様に,長い単語が傍註文の最初の単語として来るとハイフネートが行われません.これを回避するには,その単語の前に0 \begin_inset space \thinspace{} \end_inset pt水平空白を挿入してください \begin_inset Marginal status open \begin_layout Plain Layout \begin_inset space \hspace*{} \length 0pt \end_inset AVeryLongMarginParWord(とっても長い傍註段落中の単語)がハイフネートされる例. \end_layout \end_inset . \end_layout \begin_layout Standard \begin_inset VSpace bigskip \end_inset \end_layout \begin_layout Standard \begin_inset Note Greyedout status open \begin_layout Plain Layout \series bold 【註】 \series default 通常,傍註は表やフロート,脚註の中では使用することができません. \end_layout \end_inset \end_layout \begin_layout Standard \begin_inset VSpace bigskip \end_inset \end_layout \begin_layout Standard \begin_inset ERT status collapsed \begin_layout Plain Layout \backslash ifmarginnote \end_layout \end_inset \begin_inset Note Note status open \begin_layout Plain Layout 以下の部分は,\SpecialChar LaTeX パッケージ \series bold marginnote \series default が導入されているときのみ表示されます. \end_layout \end_inset \end_layout \begin_layout Standard この制約は,\SpecialChar LaTeX パッケージ \series bold marginnote \series default \begin_inset Index idx status collapsed \begin_layout Plain Layout \SpecialChar LaTeX ぱっけーじ@\SpecialChar LaTeX パッケージ ! marginnote \end_layout \end_inset を使用することで回避することができます.以下の二行を使用中の文書プリアンブルに書き加えると,\SpecialChar LyX が傍註に使うコマンドが再定義されて, \series bold marginnote \series default パッケージが提供するコマンドを使うようになります. \end_layout \begin_layout Standard \series bold \backslash usepackage{marginnote} \begin_inset Newline newline \end_inset \backslash let \backslash marginpar \backslash marginnote \end_layout \begin_layout Standard \series bold marginnote \series default には他にも便利な機能があるので,この方法が本文書でも使われています.というのは, \series bold marginnote \series default を使うと,傍註文に垂直オフセットを設定することができるからです.これは,あまりにもたくさんの傍註が非常に近いところに集まっていたり,もっとよいページレイアウトが 望まれるときなどに,よく必要とされます.オフセットは,\SpecialChar LyX 中の傍註の後ろに\SpecialChar TeX コードで直接 \end_layout \begin_layout Standard \series bold [オフセット] \end_layout \begin_layout Standard という形で書くことで設定することができます.ここで「オフセット」には,表 \begin_inset CommandInset ref LatexCommand ref reference "tab:単位" \end_inset に挙げてある単位の一つを使用します.負の値を与えると註釈は上にずれ,正の値だと下にずれます.たとえば,この本文行の横にある傍註は,\SpecialChar TeX コードコマンド「 \series bold [-1.5cm] \series default 」を使用して,1.5 \begin_inset space \thinspace{} \end_inset cm上にずらしてあります \begin_inset Marginal status open \begin_layout Plain Layout この傍註は,本来の位置よりも1.5 \begin_inset space \thinspace{} \end_inset cm上にずらしてあります. \end_layout \end_inset \begin_inset ERT status collapsed \begin_layout Plain Layout [-1.5cm] \end_layout \end_inset . \end_layout \begin_layout Standard \begin_inset VSpace medskip \end_inset \series bold marginnote \series default を使うと,傍註の揃えを変更することもできます.たとえば, \end_layout \begin_layout Standard \series bold \backslash renewcommand*{ \backslash raggedleftmarginnote}{ \backslash centering} \begin_inset Newline newline \end_inset \backslash renewcommand*{ \backslash raggedrightmarginnote}{ \backslash centering} \end_layout \begin_layout Standard というコマンドを使うと,中央揃えになります. \series bold \backslash raggedleftmarginnote \series default とは,左側に表示されている傍註のことを指します \begin_inset ERT status collapsed \begin_layout Plain Layout \backslash renewcommand*{ \backslash raggedleftmarginnote}{ \backslash centering} \end_layout \begin_layout Plain Layout \backslash renewcommand*{ \backslash raggedrightmarginnote}{ \backslash centering} \end_layout \end_inset \begin_inset Marginal status open \begin_layout Plain Layout この傍註の文章は中央揃えになっています. \end_layout \end_inset .既定の設定は, \end_layout \begin_layout Standard \series bold \backslash renewcommand*{ \backslash raggedleftmarginnote}{ \backslash raggedleft} \begin_inset Newline newline \end_inset \backslash renewcommand*{ \backslash raggedrightmarginnote}{ \backslash raggedright} \series default \begin_inset ERT status collapsed \begin_layout Plain Layout \backslash renewcommand*{ \backslash raggedleftmarginnote}{ \backslash raggedleft} \end_layout \begin_layout Plain Layout \backslash renewcommand*{ \backslash raggedrightmarginnote}{ \backslash raggedright} \end_layout \end_inset \end_layout \begin_layout Standard です. \end_layout \begin_layout Standard \begin_inset VSpace medskip \end_inset \series bold marginnote \series default の他の機能については, \begin_inset CommandInset citation LatexCommand cite key "marginnote" literal "true" \end_inset の取扱説明書をご参照ください. \end_layout \begin_layout Standard \begin_inset VSpace bigskip \end_inset 傍註のレイアウトは,傍註の定義を変更することによって変えることができます.たとえば,すべての傍註に,下線を引いたサンセリフ体の太字で「 \family sans \series bold \bar under 注意! \family default \series default \bar default 」というヘッダ文をつけるには,以下を使用している文書プリアンブルに書き加えてください. \end_layout \begin_layout Standard \series bold \backslash let \backslash myMarginpar \backslash marginpar \begin_inset Newline newline \end_inset \backslash renewcommand{ \backslash marginpar}[1]{ \backslash myMarginpar{% \begin_inset Newline newline \end_inset \begin_inset Phantom HPhantom status open \begin_layout Plain Layout \series bold \begin_inset space ~ \end_inset \end_layout \end_inset \backslash hspace{0pt} \backslash textsf{ \backslash textbf{ \backslash underbar{注意!}}}% \begin_inset Newline newline \end_inset \begin_inset Phantom HPhantom status open \begin_layout Plain Layout \series bold \begin_inset space ~ \end_inset \end_layout \end_inset \backslash vspace{1.5mm} \backslash \backslash #1}} \end_layout \begin_layout Standard \begin_inset ERT status collapsed \begin_layout Plain Layout \backslash let \backslash myMarginpar \backslash marginpar \end_layout \begin_layout Plain Layout \backslash renewcommand{ \backslash marginpar}[1]{ \backslash myMarginpar{% \end_layout \begin_layout Plain Layout \backslash textsf{ \backslash textbf{ \backslash underbar{注意!}}}% \end_layout \begin_layout Plain Layout \backslash vspace{1.5mm} \backslash \backslash #1}} \end_layout \end_inset \begin_inset Marginal status open \begin_layout Plain Layout これは,定義したヘッダをつけた傍註です. \end_layout \end_inset \begin_inset ERT status collapsed \begin_layout Plain Layout [-1.5cm] \end_layout \end_inset \begin_inset ERT status collapsed \begin_layout Plain Layout \backslash renewcommand{ \backslash marginpar}[1]{ \backslash myMarginpar{#1}} \end_layout \end_inset \begin_inset Note Note status open \begin_layout Plain Layout 傍註書式は,この例の分だけ変更してあります. \end_layout \end_inset \end_layout \begin_layout Standard \begin_inset ERT status collapsed \begin_layout Plain Layout \backslash else \end_layout \end_inset \begin_inset Note Note status open \begin_layout Plain Layout 以下の部分は,\SpecialChar LaTeX パッケージ \series bold marginnote \series default が導入されていないときのみ表示されます. \end_layout \end_inset \end_layout \begin_layout Standard 本節の以下の部分を出力に表示するには,\SpecialChar LaTeX パッケージ \series bold marginnote \series default を導入する必要があります. \end_layout \begin_layout Standard \begin_inset ERT status collapsed \begin_layout Plain Layout \backslash fi \end_layout \end_inset \end_layout \begin_layout Chapter ボックス \end_layout \begin_layout Section はじめに \begin_inset Index idx status collapsed \begin_layout Plain Layout ぼっくす@ボックス ! はじめに \end_layout \end_inset \end_layout \begin_layout Standard ボックスは,一塊の文章を整形するのに使用します.ボックスは,多言語文書を書くのに使用したり(第 \begin_inset CommandInset ref LatexCommand ref reference "sec:ミニページ" \end_inset 節参照),文章を囲ったり(第 \begin_inset CommandInset ref LatexCommand ref reference "sec:装飾" \end_inset 節参照),単語がハイフネートされるのを予防したり(第 \begin_inset CommandInset ref LatexCommand ref reference "sec:ハイフネーションの回避" \end_inset 節参照),文章を揃えたり(第 \begin_inset CommandInset ref LatexCommand ref reference "subsec:垂直揃え" \end_inset 節参照),あるいは文章の背景色を設定したり(第 \begin_inset CommandInset ref LatexCommand ref reference "sec:色付きボックス" \end_inset 節参照)するのに使用します. \end_layout \begin_layout Standard ボックスは, \family sans 挿入\SpecialChar menuseparator ボックス \family default メニューかツールバーボタン \family sans \begin_inset Info type "icon" arg "box-insert Frameless" \end_inset \family default を使って挿入することができます.すると, \begin_inset Graphics filename clipart/BoxInsetDefault.png scale 95 scaleBeforeRotation \end_inset のように \family sans ボックス(minipage環境) \family default というラベルのついた灰色の箱形が挿入されます.ボックス型は,この箱形を右クリックすると出てくるメニューで指定することができます. \family sans 設定 \family default メニューを選択すると現れるボックスダイアログでは, \family sans parboxコマンド \family default と \family sans minipage環境 \family default の二つの \family sans 内部ボックス \family default 型を選択することができます. \family sans minipage \family default 型は,新規ボックスの既定値となっており,第 \begin_inset CommandInset ref LatexCommand ref reference "sec:ミニページ" \end_inset 節で説明します. \family sans parbox \family default 型については第 \begin_inset CommandInset ref LatexCommand ref reference "sec:Parboxes" \end_inset 節, \family sans makebox \family default 型については第 \begin_inset CommandInset ref LatexCommand ref reference "sec:ハイフネーションの回避" \end_inset 節で述べます. \end_layout \begin_layout Standard ボックスは付番されないので,フロートや脚註のように参照することはできません. \end_layout \begin_layout Standard \begin_inset Note Greyedout status open \begin_layout Plain Layout \series bold 【註】 \series default ボックスは, \family sans 箇条書き(記号) \family default 環境や \family sans 箇条書き(記述) \family default 環境の単独要素とすべきではありません. \end_layout \end_inset \end_layout \begin_layout Standard \begin_inset Note Greyedout status open \begin_layout Plain Layout \series bold 【註】 \series default 理由は不明ですが,枠付きボックスを使用している場合には, \family sans 内部ボックス \family default 型は \family sans なし \family default にしか設定することができません. \family sans 内部ボックス \family default 型や枠のないボックスについては,第 \begin_inset CommandInset ref LatexCommand ref reference "sec:ハイフネーションの回避" \end_inset 節で説明します. \end_layout \end_inset \end_layout \begin_layout Section ボックスダイアログ \begin_inset CommandInset label LatexCommand label name "sec:ボックスダイアログ" \end_inset \begin_inset Index idx status collapsed \begin_layout Plain Layout ぼっくす@ボックス ! ぼっくすだいあろぐ@ボックスダイアログ \end_layout \end_inset \end_layout \begin_layout Subsection 寸法 \begin_inset Index idx status collapsed \begin_layout Plain Layout ぼっくす@ボックス ! すんぽう@寸法 \end_layout \end_inset \end_layout \begin_layout Standard ボックスダイアログでは, \family sans 幅 \family default と \family sans 高さ \family default の各フィールドでボックスのジオメトリを調整することができます.ジオメトリに使用することのできる単位は,表 \begin_inset CommandInset ref LatexCommand ref reference "tab:単位" \end_inset に説明されています. \family sans 高さ \family default フィールドには,加えて以下の寸法を使用することができます. \end_layout \begin_layout Description 階層 これは平文の「高さ」です.ボックス中に複数行がある場合には,全体としての階層は無視されます. \begin_inset Newline newline \end_inset \begin_inset Newline newline \end_inset \begin_inset Newline newline \end_inset \begin_inset Box Boxed position "c" hor_pos "c" has_inner_box 1 inner_pos "c" use_parbox 0 use_makebox 0 width "12col%" special "none" height "1in" height_special "depth" thickness "0.4pt" separation "3pt" shadowsize "4pt" framecolor "black" backgroundcolor "none" status collapsed \begin_layout Plain Layout \align center 高さを1階層に設定したボックス \end_layout \end_inset \begin_inset Newline newline \end_inset \begin_inset Newline newline \end_inset \end_layout \begin_layout Description 高さ これはボックス内部にある文章の高さです.この寸法でたとえば2の値を与えると,ボックスの高さを文章の2倍の高さに設定します. \begin_inset Box Boxed position "c" hor_pos "c" has_inner_box 1 inner_pos "c" use_parbox 0 use_makebox 0 width "20col%" special "none" height "2in" height_special "height" thickness "0.4pt" separation "3pt" shadowsize "4pt" framecolor "black" backgroundcolor "none" status collapsed \begin_layout Plain Layout \align center 高さを2高さに設定したボックス \end_layout \end_inset \end_layout \begin_layout Description 全高 これは「高さ」+「階層」です. \begin_inset Box Boxed position "c" hor_pos "c" has_inner_box 1 inner_pos "c" use_parbox 0 use_makebox 0 width "20col%" special "none" height "1in" height_special "totalheight" thickness "0.4pt" separation "3pt" shadowsize "4pt" framecolor "black" backgroundcolor "none" status collapsed \begin_layout Plain Layout \align center 高さを1全高に設定したボックス \end_layout \end_inset \end_layout \begin_layout Description 幅 これはボックスの幅を高さに設定します. \begin_inset Box Boxed position "c" hor_pos "c" has_inner_box 1 inner_pos "c" use_parbox 0 use_makebox 0 width "12col%" special "none" height "1in" height_special "width" thickness "0.4pt" separation "3pt" shadowsize "4pt" framecolor "black" backgroundcolor "none" status collapsed \begin_layout Plain Layout \align center 高さを1幅に設定したボックス \end_layout \end_inset \end_layout \begin_layout Subsection 文字揃え \begin_inset Index idx status collapsed \begin_layout Plain Layout ぼっくす@ボックス ! もじそろえ@文字揃え \end_layout \end_inset \end_layout \begin_layout Standard \family sans 内部ボックス \family default を選んだ場合には,ボックスの垂直揃えを以下のいずれかに設定できます. \end_layout \begin_layout Description 上 これは例示のための本文行です. \begin_inset Box Boxed position "t" hor_pos "c" has_inner_box 1 inner_pos "c" use_parbox 0 use_makebox 0 width "12col%" special "none" height "1in" height_special "totalheight" thickness "0.4pt" separation "3pt" shadowsize "4pt" framecolor "black" backgroundcolor "none" status collapsed \begin_layout Plain Layout \align center このボックスは上揃えです. \end_layout \end_inset これは例示のための本文行です. \end_layout \begin_layout Description 中央 これは例示のための本文行です. \begin_inset Box Boxed position "c" hor_pos "c" has_inner_box 1 inner_pos "c" use_parbox 0 use_makebox 0 width "12col%" special "none" height "1in" height_special "totalheight" thickness "0.4pt" separation "3pt" shadowsize "4pt" framecolor "black" backgroundcolor "none" status collapsed \begin_layout Plain Layout \align center このボックスは中央揃えです. \end_layout \end_inset これは例示のための本文行です. \end_layout \begin_layout Description 下 これは例示のための本文行です. \begin_inset Box Boxed position "b" hor_pos "c" has_inner_box 1 inner_pos "c" use_parbox 0 use_makebox 0 width "12col%" special "none" height "1in" height_special "totalheight" thickness "0.4pt" separation "3pt" shadowsize "4pt" framecolor "black" backgroundcolor "none" status collapsed \begin_layout Plain Layout \align center このボックスは下揃えです. \end_layout \end_inset これは例示のための本文行です. \end_layout \begin_layout Standard \begin_inset Note Greyedout status open \begin_layout Plain Layout \series bold 【註】 \series default 同一行に二つのボックスがあり,一方だけに影付きなどが設定されている場合には,ボックスの垂直文字揃えが出力中で無効となる場合があります. \end_layout \end_inset \end_layout \begin_layout Standard ボックスを独立した段落においた場合には,ボックスの水平文字揃えは,\SpecialChar LyX の段落ダイアログから設定できます. \end_layout \begin_layout Standard \begin_inset VSpace bigskip \end_inset \family sans 内部ボックス \family default を設定したときには,ボックスの内容を以下のように垂直揃えを行うことができます. \end_layout \begin_layout Description 上 これは例示のための本文行です. \begin_inset Box Boxed position "c" hor_pos "c" has_inner_box 1 inner_pos "t" use_parbox 0 use_makebox 0 width "12col%" special "none" height "1.5in" height_special "totalheight" thickness "0.4pt" separation "3pt" shadowsize "4pt" framecolor "black" backgroundcolor "none" status collapsed \begin_layout Plain Layout \align center このボックスの文章は上揃えです. \end_layout \end_inset これは例示のための本文行です. \end_layout \begin_layout Description 中央 これは例示のための本文行です. \begin_inset Box Boxed position "c" hor_pos "c" has_inner_box 1 inner_pos "c" use_parbox 0 use_makebox 0 width "12col%" special "none" height "1.5in" height_special "totalheight" thickness "0.4pt" separation "3pt" shadowsize "4pt" framecolor "black" backgroundcolor "none" status collapsed \begin_layout Plain Layout \align center このボックスの文章は中央揃えです. \end_layout \end_inset これは例示のための本文行です. \end_layout \begin_layout Description 下 これは例示のための本文行です. \begin_inset Box Boxed position "c" hor_pos "c" has_inner_box 1 inner_pos "b" use_parbox 0 use_makebox 0 width "12col%" special "none" height "1.5in" height_special "totalheight" thickness "0.4pt" separation "3pt" shadowsize "4pt" framecolor "black" backgroundcolor "none" status collapsed \begin_layout Plain Layout \align center このボックスの文章は下揃えです. \end_layout \end_inset これは例示のための本文行です. \end_layout \begin_layout Description 広げる これは例示のための本文行です. \begin_inset Box Boxed position "c" hor_pos "c" has_inner_box 1 inner_pos "s" use_parbox 0 use_makebox 0 width "17col%" special "none" height "1.5in" height_special "totalheight" thickness "0.4pt" separation "3pt" shadowsize "4pt" framecolor "black" backgroundcolor "none" status collapsed \begin_layout Plain Layout \align center このボックスの \end_layout \begin_layout Plain Layout \align center 文章は広げて \end_layout \begin_layout Plain Layout \align center あります. \end_layout \end_inset これは例示のための本文行です. \end_layout \begin_layout Standard ボックスの内容を広げるには,ボックスに複数の段落がなくてはなりません.上述の例では,文章の各行を独立の段落に設定してあります. \end_layout \begin_layout Standard \begin_inset VSpace bigskip \end_inset \family sans 内部ボックス \family default を設定しているときに,ボックスの内容を水平方向に揃えるには,\SpecialChar LyX の段落ダイアログを用います. \end_layout \begin_layout Standard \align center \begin_inset Box Boxed position "c" hor_pos "c" has_inner_box 1 inner_pos "s" use_parbox 0 use_makebox 0 width "25col%" special "none" height "1.25in" height_special "totalheight" thickness "0.4pt" separation "3pt" shadowsize "4pt" framecolor "black" backgroundcolor "none" status collapsed \begin_layout Plain Layout \align left このボックスの \end_layout \begin_layout Plain Layout \align center 文章は広げて \end_layout \begin_layout Plain Layout \align right あります. \end_layout \end_inset \end_layout \begin_layout Standard \family sans 内部ボックス \family default を設定していないときには,ボックスの内容は,ボックスダイアログの中で水平揃えの設定をすることができます. \end_layout \begin_layout Standard \align center \begin_inset Box Boxed position "c" hor_pos "s" has_inner_box 0 inner_pos "s" use_parbox 0 use_makebox 0 width "90col%" special "none" height "1.25in" height_special "totalheight" thickness "0.4pt" separation "3pt" shadowsize "4pt" framecolor "black" backgroundcolor "none" status collapsed \begin_layout Plain Layout このボックスの文章は水平方向に広げてあります. \end_layout \end_inset \end_layout \begin_layout Subsection 装飾 \begin_inset CommandInset label LatexCommand label name "sec:装飾" \end_inset \begin_inset Index idx status collapsed \begin_layout Plain Layout ぼっくす@ボックス ! そうしょく@装飾 \end_layout \end_inset \end_layout \begin_layout Standard ボックス型は,ボックスダイアログ中の \family sans 装飾 \family default ドロップダウン式一覧から指定することができます.以下の型を指定することができます. \end_layout \begin_layout Description 枠なし 枠を描きません. \end_layout \begin_layout Description 簡素な長方形の枠 これはボックスの周りに長方形の枠を描きます.枠線の太さを指定することができます. \begin_inset Box Boxed position "c" hor_pos "c" has_inner_box 1 inner_pos "c" use_parbox 0 use_makebox 0 width "20col%" special "none" height "1in" height_special "totalheight" thickness "0.4pt" separation "3pt" shadowsize "4pt" framecolor "black" backgroundcolor "none" status collapsed \begin_layout Plain Layout \align center 長方形の箱型 \end_layout \end_inset \end_layout \begin_layout Description 楕円形の枠(細線) これはボックスの周りに楕円形の枠を描きます.枠線の太さは0.4 \begin_inset space \thinspace{} \end_inset ptです. \begin_inset Box ovalbox position "c" hor_pos "c" has_inner_box 1 inner_pos "c" use_parbox 0 use_makebox 0 width "20col%" special "none" height "1in" height_special "totalheight" thickness "0.4pt" separation "3pt" shadowsize "4pt" framecolor "black" backgroundcolor "none" status collapsed \begin_layout Plain Layout \align center 楕円形の箱型(細線) \end_layout \end_inset \end_layout \begin_layout Description 楕円形の枠(太線) これはボックスの周りに楕円形の枠を描きます.枠線の太さは0.8 \begin_inset space \thinspace{} \end_inset ptです. \begin_inset Box Ovalbox position "c" hor_pos "c" has_inner_box 1 inner_pos "c" use_parbox 0 use_makebox 0 width "20col%" special "none" height "1in" height_special "totalheight" thickness "0.4pt" separation "3pt" shadowsize "4pt" framecolor "black" backgroundcolor "none" status collapsed \begin_layout Plain Layout \align center 楕円形の箱型(太線) \end_layout \end_inset \end_layout \begin_layout Description 影付き これはボックスの周りに影付きの長方形の枠を描きます.枠線の太さと影を指定することができます. \begin_inset Box Shadowbox position "c" hor_pos "c" has_inner_box 1 inner_pos "c" use_parbox 0 use_makebox 0 width "20col%" special "none" height "1in" height_special "totalheight" thickness "0.4pt" separation "3pt" shadowsize "4pt" framecolor "black" backgroundcolor "none" status collapsed \begin_layout Plain Layout \align center 影付きの箱型 \end_layout \end_inset \end_layout \begin_layout Description 影の背景 これは背景色が赤のボックスを描きます.色付きボックスとは違って \begin_inset Foot status collapsed \begin_layout Plain Layout 第 \begin_inset CommandInset ref LatexCommand ref reference "sec:色付きボックス" \end_inset 節を参照のこと. \end_layout \end_inset ,これは列幅全体を使用し,ボックスは独立した段落に設定されます. \begin_inset Box Shaded position "t" hor_pos "c" has_inner_box 0 inner_pos "t" use_parbox 0 use_makebox 0 width "50col%" special "none" height "1in" height_special "totalheight" thickness "0.4pt" separation "3pt" shadowsize "4pt" framecolor "black" backgroundcolor "none" status collapsed \begin_layout Plain Layout 影付き背景の箱型 \end_layout \end_inset \end_layout \begin_layout Description 二重線の長方形の枠 これはボックスの周りに二重線の長方形の枠を描きます.内側の枠の太さは,線幅の0.75倍であり,外側の枠の太さは,線幅の1.5倍です.枠同士の間隔 は,線幅の1.5倍+0.5 \begin_inset space \thinspace{} \end_inset ptです. \begin_inset Box Doublebox position "c" hor_pos "c" has_inner_box 1 inner_pos "c" use_parbox 0 use_makebox 0 width "20col%" special "none" height "1in" height_special "totalheight" thickness "0.4pt" separation "3pt" shadowsize "4pt" framecolor "black" backgroundcolor "none" status collapsed \begin_layout Plain Layout \align center 二重の長方形の箱型 \end_layout \end_inset \end_layout \begin_layout Standard \begin_inset VSpace bigskip \end_inset \SpecialChar LyX のボックスラベルには,使用中の枠の型が表示されます.すべての型を使用可能にするには,\SpecialChar LaTeX パッケージ \series bold fancybox \series default \begin_inset Index idx status collapsed \begin_layout Plain Layout \SpecialChar LaTeX ぱっけーじ@\SpecialChar LaTeX パッケージ ! fancybox \end_layout \end_inset が導入済みでなくてはなりません. \end_layout \begin_layout Standard \begin_inset VSpace bigskip \end_inset \family sans 簡素な長方形の枠 \family default の装飾を使って内部ボックスを使用しないとき,ボックス内で改頁を許可することができます.その場合,他の枠付きボックスと違って,この枠は,つねに段幅の全幅を使用し, ボックスは独立の段落として設定されることに注意してください. \begin_inset Box Framed position "t" hor_pos "c" has_inner_box 0 inner_pos "t" use_parbox 0 use_makebox 0 width "100col%" special "none" height "1in" height_special "totalheight" thickness "0.4pt" separation "3pt" shadowsize "4pt" framecolor "black" backgroundcolor "none" status collapsed \begin_layout Plain Layout 改行可能な箱型 \end_layout \end_inset \end_layout \begin_layout Section ボックスの詳細な設定 \begin_inset Index idx status collapsed \begin_layout Plain Layout ぼっくす@ボックス ! しょうさいなせってい@詳細な設定 \end_layout \end_inset \end_layout \begin_layout Standard 楕円形ボックスの丸い角の直径は,コマンド \series bold \backslash cornersize \series default で設定することができます. \end_layout \begin_layout Standard \series bold \backslash cornersize*{1cm} \end_layout \begin_layout Standard というコマンドは,直径を1 \begin_inset space \thinspace{} \end_inset cmに設定します. \end_layout \begin_layout Standard \series bold \backslash cornersize{数値} \end_layout \begin_layout Standard というコマンドは,直径を \family sans 数値 \begin_inset space \thinspace{} \end_inset \family default \begin_inset Formula $\times$ \end_inset \family sans \begin_inset space \thinspace{} \end_inset (ボックスの幅と高さの小さい方) \family default に設定します.既定値は \series bold \backslash cornersize{0.5} \series default です. \end_layout \begin_layout Standard \begin_inset ERT status collapsed \begin_layout Plain Layout \backslash cornersize*{1.5cm} \end_layout \end_inset \begin_inset Box Ovalbox position "c" hor_pos "c" has_inner_box 1 inner_pos "c" use_parbox 0 use_makebox 0 width "25col%" special "none" height "1in" height_special "totalheight" thickness "0.4pt" separation "3pt" shadowsize "4pt" framecolor "black" backgroundcolor "none" status open \begin_layout Plain Layout \align center \series bold \backslash cornersize \series default \begin_inset space \thinspace{} \end_inset = \begin_inset space \thinspace{} \end_inset 1.5 \begin_inset space \thinspace{} \end_inset cmの楕円形の箱型 \end_layout \end_inset \begin_inset ERT status collapsed \begin_layout Plain Layout \backslash cornersize{0.5} \end_layout \end_inset \end_layout \begin_layout Standard \begin_inset VSpace bigskip \end_inset \end_layout \begin_layout Standard \family sans 影付き背景 \family default ボックスの赤色の既定背景色は, \series bold \backslash definecolor{shadebox} \series default コマンドで局所的に変更することもできますし, \family sans ツール\SpecialChar menuseparator 設定\SpecialChar menuseparator 色\SpecialChar menuseparator 影付きボックス \family default メニューからグローバルに変更することもできます. \series bold \backslash definecolor \series default コマンドの用法は第 \begin_inset CommandInset ref LatexCommand ref reference "sec:色付きの表" \end_inset 節 \begin_inset Foot status collapsed \begin_layout Plain Layout N \series bold \backslash definecolor \series default は,\SpecialChar LaTeX パッケージの \series bold color \series default をプリアンブルに読み込む必要があります.第 \begin_inset CommandInset ref LatexCommand ref reference "sec:色付きボックス" \end_inset 節をご参照ください.. \end_layout \end_inset で説明されています. \end_layout \begin_layout Standard たとえば,下記の影付き背景ボックスの外見は \end_layout \begin_layout Standard \series bold \backslash definecolor{shadecolor}{cmyk}{0.5,0,1,0.5} \end_layout \begin_layout Standard という\SpecialChar TeX コードコマンドを使って設定してあります. \end_layout \begin_layout Standard \begin_inset ERT status collapsed \begin_layout Plain Layout \backslash definecolor{shadecolor}{cmyk}{0.5,0,1,0.5} \end_layout \end_inset \begin_inset Box Shaded position "t" hor_pos "c" has_inner_box 0 inner_pos "t" use_parbox 0 use_makebox 0 width "100col%" special "none" height "1in" height_special "totalheight" thickness "0.4pt" separation "3pt" shadowsize "4pt" framecolor "black" backgroundcolor "none" status open \begin_layout Plain Layout \color yellow これは,濃緑色の背景の \family sans 影付き背景 \family default ボックスに入れた黄色の文章です. \end_layout \end_inset \begin_inset ERT status collapsed \begin_layout Plain Layout \backslash definecolor{shadecolor}{rgb}{1,0,0} \end_layout \end_inset \end_layout \begin_layout Standard \begin_inset VSpace bigskip \end_inset 手動で変更した寸法と色は,それを変更したコマンド以降のすべてのボックスに対して有効です. \end_layout \begin_layout Section ミニページ \begin_inset CommandInset label LatexCommand label name "sec:ミニページ" \end_inset \begin_inset Index idx status collapsed \begin_layout Plain Layout ぼっくす@ボックス ! みにぺーじ@ミニページ \end_layout \end_inset \end_layout \begin_layout Standard ミニページは,\SpecialChar LaTeX によってページの中のページとして取り扱われるので,たとえばそれ自身で脚註を持つことができます. \end_layout \begin_layout Standard ミニページは,複数の言語を含む文書を執筆する際に便利です. \end_layout \begin_layout Standard 下掲は,二つの例示用ミニページを横に並べたものです.これらの幅は45列幅%に設定され, \family sans 挿入 \family default \SpecialChar menuseparator \family sans 整形 \family default \SpecialChar menuseparator \family sans 水平方向の空白 \family default メニューで挿入した水平フィルで隔てられています. \begin_inset Newpage newpage \end_inset \end_layout \begin_layout Standard \begin_inset Box Frameless position "t" hor_pos "c" has_inner_box 1 inner_pos "c" use_parbox 0 use_makebox 0 width "45col%" special "none" height "1in" height_special "totalheight" thickness "0.4pt" separation "3pt" shadowsize "4pt" framecolor "black" backgroundcolor "none" status open \begin_layout Plain Layout Dies ist ein deutscher Text. Dies ist ein deutscher Text. Dies ist ein deutscher Text. Dies ist ein deutscher Text. Dies ist ein deutscher Text. Dies ist ein deutscher Text. Dies ist ein deutscher Text. Dies ist ein deutscher Text. Dies ist ein deutscher Text. Dies ist ein deutscher Text. Dies ist ein deutscher Text. Dies ist ein deutscher Text. Dies ist ein deutscher Text \begin_inset Foot status collapsed \begin_layout Plain Layout Dies ist eine deutsche Fußnote. \end_layout \end_inset . Dies ist ein deutscher Text. Dies ist ein deutscher Text. \end_layout \end_inset \begin_inset space \hfill{} \end_inset \begin_inset Box Frameless position "t" hor_pos "c" has_inner_box 1 inner_pos "c" use_parbox 0 use_makebox 0 width "45col%" special "none" height "1in" height_special "totalheight" thickness "0.4pt" separation "3pt" shadowsize "4pt" framecolor "black" backgroundcolor "none" status open \begin_layout Plain Layout This is an English Text. This is an English Text. This is an English Text. This is an English Text. This is an English Text. This is an English Text. This is an English Text. This is an English Text. This is an English Text. This is an English Text. This is an English Text. This is an English Text. This is an English Text. This is an English Text. This is an English Text. This is an English Text. \begin_inset Foot status collapsed \begin_layout Plain Layout This is an English footnote. \end_layout \end_inset This is an English Text. \end_layout \end_inset \end_layout \begin_layout Standard \begin_inset VSpace bigskip \end_inset ミニページ内では,文書全体の段落設定は無視されます.つまり,たとえば文書設定で \family sans 中スキップ \family default を設定していたとしても,ミニページ内の段落間には余白が置かれません. \end_layout \begin_layout Standard ミニページは,文章部に背景色を与えるのに使用することもできます.第 \begin_inset CommandInset ref LatexCommand ref reference "sec:色付きボックス" \end_inset 節をご参照ください. \end_layout \begin_layout Standard \begin_inset Note Greyedout status open \begin_layout Plain Layout \series bold 【註】 \series default ミニページ内にフロートや傍註を使用することはできませんが,ミニページを表・フロート・他のボックス内で使用することはできます. \end_layout \end_inset \end_layout \begin_layout Standard \begin_inset VSpace bigskip \end_inset \end_layout \begin_layout Standard \SpecialChar LyX は, \emph on 可変幅ミニページ \emph default モジュールを経由して,内容の幅によって自動的に幅が調整されるミニページを一部サポートしています.ファイル \family typewriter examples/varwidth-floats-side-by-side.lyx \family default では,2つのフロートを並べて配置するのに可変幅ミニページを使用する例を取り扱っています.これには, \family typewriter Varwidth \family default \SpecialChar LaTeX パッケージが必要です. \end_layout \begin_layout Section 段落ボックス(parbox) \begin_inset CommandInset label LatexCommand label name "sec:Parboxes" \end_inset \begin_inset Index idx status collapsed \begin_layout Plain Layout ほっくす@ボックス ! たんらく@段落—(parbox) \end_layout \end_inset \end_layout \begin_layout Standard 段落ボックス(parbox)はミニページに非常によく似ていますが,脚註を付けることができない点が違います. \end_layout \begin_layout Standard \align center \begin_inset Box Frameless position "t" hor_pos "c" has_inner_box 1 inner_pos "t" use_parbox 1 use_makebox 0 width "33col%" special "none" height "1in" height_special "totalheight" thickness "0.4pt" separation "3pt" shadowsize "4pt" framecolor "black" backgroundcolor "none" status open \begin_layout Plain Layout これは段落ボックス内の文章です.これは段落ボックス内の文章です. \end_layout \begin_layout Plain Layout 右の脚註は表示されません. \begin_inset Foot status collapsed \begin_layout Plain Layout これはparbox内の脚註であり,したがって表示はされません. \end_layout \end_inset \end_layout \end_inset \end_layout \begin_layout Section 単語や文字のボックス \begin_inset Index idx status collapsed \begin_layout Plain Layout ぼっくす@ボックス ! もじよう@文字用 \end_layout \end_inset \end_layout \begin_layout Subsection ハイフネーションの回避 \begin_inset CommandInset label LatexCommand label name "sec:ハイフネーションの回避" \end_inset \begin_inset Index idx status collapsed \begin_layout Plain Layout ぼっくす@ボックス ! はいふねーしょんのかいひ@ハイフネーションの回避 \end_layout \end_inset \end_layout \begin_layout Standard 単語や文章がハイフネートされるのを防ぐには, \family sans makebox \family default 型ボックスを使うことができます. \begin_inset Newline newline \end_inset 以下が例示用の文章です. \end_layout \begin_layout Standard This line is an example to show how you can prevent the hyphenation of \begin_inset Quotes eld \end_inset veryverylongword \begin_inset Quotes erd \end_inset . \end_layout \begin_layout Standard 単語「veryverylongword」がハイフネートされるのを防ぐには,単語をボックスの中に入れて, \family sans 内部ボックス \family default を \family sans makebox \family default コマンドに設定し,幅は指定しません. \end_layout \begin_layout Standard 以下がその結果です. \end_layout \begin_layout Standard This line is an example to show how you can prevent the hyphenation of \begin_inset Box Frameless position "t" hor_pos "c" has_inner_box 1 inner_pos "t" use_parbox 0 use_makebox 1 width "" special "none" height "1in" height_special "totalheight" thickness "0.4pt" separation "3pt" shadowsize "4pt" framecolor "black" backgroundcolor "none" status open \begin_layout Plain Layout \begin_inset Quotes eld \end_inset veryverylongword \begin_inset Quotes erd \end_inset \end_layout \end_inset . \end_layout \begin_layout Standard 別の方法としては,以下のように,単語の前に直接\SpecialChar TeX コードで「 \series bold \backslash - \series default 」コマンドを設定する方法もあります. \end_layout \begin_layout Standard This line is an example to show how you can prevent the hyphenation of \begin_inset Quotes eld \end_inset \begin_inset ERT status collapsed \begin_layout Plain Layout \backslash - \end_layout \end_inset veryverylongword \begin_inset Quotes erd \end_inset . \end_layout \begin_layout Standard もちろん,こうすることでこの単語は右余白に突き出てしまいます.これを回避するには,以下のように \family sans 挿入 \family default \SpecialChar menuseparator \family sans 整形 \family default \SpecialChar menuseparator \family sans 整形なし改行 \family default メニュー( \begin_inset Flex Ruby status collapsed \begin_layout Plain Layout 捷径 \begin_inset Argument post:1 status collapsed \begin_layout Plain Layout ショートカット \end_layout \end_inset \end_layout \end_inset \begin_inset Info type "shortcut" arg "newline-insert newline" \end_inset )から改行を単語の前に入れてください. \end_layout \begin_layout Standard This line is an example to show how you can prevent the hyphenation of \begin_inset Newline newline \end_inset \begin_inset Box Frameless position "t" hor_pos "c" has_inner_box 1 inner_pos "t" use_parbox 0 use_makebox 1 width "" special "none" height "1in" height_special "totalheight" thickness "0.4pt" separation "3pt" shadowsize "4pt" framecolor "black" backgroundcolor "none" status open \begin_layout Plain Layout \begin_inset Quotes eld \end_inset veryverylongword \begin_inset Quotes erd \end_inset \end_layout \end_inset . \end_layout \begin_layout Subsection 垂直揃え \begin_inset CommandInset label LatexCommand label name "subsec:垂直揃え" \end_inset \begin_inset Index idx status collapsed \begin_layout Plain Layout ぼっくす@ボックス ! すいちょくぞろえのしかた@垂直揃えの仕方 \end_layout \end_inset \begin_inset Index idx status collapsed \begin_layout Plain Layout ぼっくす@ボックス ! Raiseboxes \end_layout \end_inset \end_layout \begin_layout Standard \series bold \backslash raisebox \series default コマンドを使うと,単語や文字や他のボックスを,周囲の文章に対して垂直方向に整列させることができます. \series bold \backslash raisebox \series default は以下の書式で使用します. \end_layout \begin_layout Standard \series bold \backslash raisebox{持ち上げ幅}[高さ][深さ]{ボックスの内容} \end_layout \begin_layout Standard ここで持ち上げ幅は,正の値ならばボックスを持ち上げ,負の値ならばボックスを引き下げます. \end_layout \begin_layout Standard たとえば,「preventing」という単語を,そのもっとも「深い」文字「p」の底部がベースラインに来るように揃えるには,単語の前に\SpecialChar TeX コードで \end_layout \begin_layout Standard \series bold \backslash raisebox{ \backslash depth}{ \end_layout \begin_layout Standard というコマンドを挿入してください.単語の後には,閉じ括弧「 \series bold } \series default 」を\SpecialChar TeX コードで挿入してください. \begin_inset Newline newline \end_inset 以下がその出力です. \end_layout \begin_layout Standard This is a text line with the word \begin_inset ERT status collapsed \begin_layout Plain Layout \backslash raisebox{ \backslash depth}{ \end_layout \end_inset \begin_inset Quotes eld \end_inset preventing \begin_inset Quotes erd \end_inset \begin_inset ERT status collapsed \begin_layout Plain Layout } \end_layout \end_inset as raised word. \end_layout \begin_layout Standard \begin_inset VSpace bigskip \end_inset 行中の文字を上げ下げすると,以下のように行間が広がります. \end_layout \begin_layout Standard This is a text line with the word \begin_inset ERT status collapsed \begin_layout Plain Layout \backslash raisebox{- \backslash depth}{ \end_layout \end_inset \begin_inset Quotes eld \end_inset preventing \begin_inset Quotes erd \end_inset \begin_inset ERT status collapsed \begin_layout Plain Layout } \end_layout \end_inset as lowered word. \begin_inset Newline newline \end_inset This is a text line with the word \begin_inset ERT status collapsed \begin_layout Plain Layout \backslash raisebox{0.5cm}{ \end_layout \end_inset \begin_inset Quotes eld \end_inset testing \begin_inset Quotes erd \end_inset \begin_inset ERT status collapsed \begin_layout Plain Layout } \end_layout \end_inset as raised word. \end_layout \begin_layout Standard 何らかの理由でこれを抑制したい場合には,ボックスの高さを零に設定してください.たとえば, \end_layout \begin_layout Standard \series bold \backslash raisebox{- \backslash depth}[0pt]{ \end_layout \begin_layout Standard とすると,以下のようになります. \end_layout \begin_layout Standard This is a text line with the word \begin_inset ERT status collapsed \begin_layout Plain Layout \backslash raisebox{- \backslash depth}[0pt]{ \end_layout \end_inset \begin_inset Quotes eld \end_inset preventing \begin_inset Quotes erd \end_inset \begin_inset ERT status collapsed \begin_layout Plain Layout } \end_layout \end_inset as lowered word. \begin_inset Newline newline \end_inset \begin_inset Newline newline \end_inset This is a text line with the word \begin_inset ERT status collapsed \begin_layout Plain Layout \backslash raisebox{0.5cm}[0pt]{ \end_layout \end_inset \begin_inset Quotes eld \end_inset testing \begin_inset Quotes erd \end_inset \begin_inset ERT status collapsed \begin_layout Plain Layout } \end_layout \end_inset as raised word. \end_layout \begin_layout Section 色付きボックス \begin_inset CommandInset label LatexCommand label name "sec:色付きボックス" \end_inset \begin_inset Index idx status collapsed \begin_layout Plain Layout ぼっくす@ボックス ! いろつき@色付き \end_layout \end_inset \end_layout \begin_layout Standard ボックスの背景に色を付けるには,ボックスダイアログで好みの色を選択するだけです.これは,橙色の背景を持つボックスの例です: \begin_inset Box Frameless position "t" hor_pos "c" has_inner_box 1 inner_pos "t" use_parbox 0 use_makebox 1 width "" special "none" height "1in" height_special "totalheight" thickness "0.4pt" separation "3pt" shadowsize "4pt" framecolor "black" backgroundcolor "orange" status open \begin_layout Plain Layout 橙色背景のボックス \end_layout \end_inset \end_layout \begin_layout Standard 装飾を \family sans 簡素な長方形の枠 \family default にした場合には,枠の色を設定できます.この場合,背景色も指定しなくてはなりません(\SpecialChar LyX は白を既定色として設定します). \begin_inset Newline newline \end_inset 例: \begin_inset Box Boxed position "t" hor_pos "c" has_inner_box 0 inner_pos "t" use_parbox 0 use_makebox 0 width "" special "none" height "1in" height_special "totalheight" thickness "0.4pt" separation "3pt" shadowsize "4pt" framecolor "teal" backgroundcolor "yellow" status open \begin_layout Plain Layout ティール色の枠と黄色の背景を持つボックス \end_layout \end_inset \end_layout \begin_layout Standard \begin_inset VSpace bigskip \end_inset もちろん,色付きボックスの中に色付きの文を入れることもできます: \begin_inset Newline newline \end_inset \begin_inset Box Boxed position "t" hor_pos "c" has_inner_box 0 inner_pos "t" use_parbox 0 use_makebox 0 width "" special "none" height "1in" height_special "totalheight" thickness "0.4pt" separation "3pt" shadowsize "4pt" framecolor "cyan" backgroundcolor "magenta" status open \begin_layout Plain Layout \color yellow これは着色した色付きボックス中の色付き文章です. \end_layout \end_inset \end_layout \begin_layout Standard \begin_inset VSpace bigskip \end_inset \end_layout \begin_layout Standard 事前に設定された色以外の色が欲しいときは,第 \begin_inset CommandInset ref LatexCommand ref reference "sec:色付きの表" \end_inset 節に述べられているように,独自色を定義することができます.独自色を使う場合には,以下のように,TeXコードを使ってボックスを組版しなくてはなりません. \end_layout \begin_layout Standard 枠なしの色付きボックスは, \series bold \backslash colorbox \series default コマンドで作ります.これは,以下のような書式で使われます. \end_layout \begin_layout Standard \series bold \backslash colorbox{色}{ボックスの内容} \end_layout \begin_layout Standard ボックスの内容には,ボックスが入ることもできますし,色付きボックスを他のボックスに入れることもできます.たとえば,単語の背景を濃緑にするには,単語の前に\SpecialChar TeX コードで \end_layout \begin_layout Standard \series bold \backslash colorbox{darkgreen}{ \end_layout \begin_layout Standard というコマンドを入れてください.単語の後には,\SpecialChar TeX コードで閉じ括弧「 \series bold } \series default 」を入れてください. \begin_inset Newline newline \end_inset 以下がその結果です. \end_layout \begin_layout Standard この行では, \begin_inset ERT status collapsed \begin_layout Plain Layout \backslash colorbox{darkgreen}{ \end_layout \end_inset 「注意!」 \begin_inset ERT status collapsed \begin_layout Plain Layout } \end_layout \end_inset という単語が濃緑の背景になっています. \end_layout \begin_layout Standard 枠付き色付きのボックスは,下記のように \series bold \backslash fcolorbox \series default コマンドを使って作ります. \end_layout \begin_layout Standard \series bold \backslash fcolorbox{枠の色}{ボックスの色}{ボックスの内容} \end_layout \begin_layout Section ボックスの伸縮回転 \end_layout \begin_layout Standard 本節に述べられているボックスを使うには, \family sans 画像ボックス \family default モジュールを文書設定で読み込んでおく必要があります. \end_layout \begin_layout Standard \begin_inset Note Greyedout status open \begin_layout Plain Layout \series bold 【註】 \series default DVIビューアによっては,回転伸縮したものの表示ができないものがあります. \end_layout \end_inset \end_layout \begin_layout Standard \begin_inset Note Greyedout status open \begin_layout Plain Layout \series bold 【註】 \series default フロートは回転伸縮したボックスの中に入れることはできません. \end_layout \end_inset \end_layout \begin_layout Subsection ボックスの回転 \begin_inset Index idx status collapsed \begin_layout Plain Layout ぼっくす@ボックス ! かいてんした@回転した \end_layout \end_inset \begin_inset Index idx status collapsed \begin_layout Plain Layout かいてん@回転 ! そざいの@素材の— \end_layout \end_inset \begin_inset Index idx status collapsed \begin_layout Plain Layout ず@図 ! のかいてん@—の回転 \end_layout \end_inset \begin_inset Index idx status collapsed \begin_layout Plain Layout ひょうのちょうせい@表の調整 ! かいてん@回転 \end_layout \end_inset \end_layout \begin_layout Standard ものを回転するならば, \family sans 回転ボックス \family default に入れることができます.このボックスは, \family sans 挿入\SpecialChar menuseparator 拡張差込枠\SpecialChar menuseparator 回転ボックス \family default で挿入することができます. \end_layout \begin_layout Standard 回転の原点は,原点差込枠(メニュー「 \family sans 挿入\SpecialChar menuseparator 原点 \family default 」)に \series bold origin=位置 \series default の形で指定することができます.位置として指定可能なのは, \emph on c \emph default (中央揃え)・ \emph on l \emph default (左揃え)・ \emph on r \emph default (右揃え)・ \emph on b \emph default (下揃え)・ \emph on t \emph default (上揃え)と,これら五つの適切な組み合わせです.たとえば, \emph on lt \emph default と指定した場合には,回転の原点をボックスの左上隅にするということです.回転原点が指定されなかった場合には,位置として \emph on l \emph default が使用されます.回転角は,角度を指定する数字で負の値もとることができます.回転の方向は,反時計回りです. \end_layout \begin_layout Standard 下の例では, \family sans 原点 \family default 差込枠に \series bold origin=c \series default , \family sans 回転 \family default 差込枠に \series bold 60 \series default と入れています. \end_layout \begin_layout Standard これは, \begin_inset Flex Rotatebox status open \begin_layout Plain Layout \begin_inset Argument 1 status open \begin_layout Plain Layout origin=c \end_layout \end_inset \begin_inset Argument 2 status open \begin_layout Plain Layout 60 \end_layout \end_inset 回転した \end_layout \end_inset 文章を含む行です. \end_layout \begin_layout Standard ボックスの中身には,以下のように,もう一つボックスを入れたり行内数式を入れたりすることもできます. \end_layout \begin_layout Standard これは, \begin_inset Flex Rotatebox status open \begin_layout Plain Layout \begin_inset Argument 1 status open \begin_layout Plain Layout origin=r \end_layout \end_inset \begin_inset Argument 2 status open \begin_layout Plain Layout 60 \end_layout \end_inset \begin_inset Box Doublebox position "c" hor_pos "c" has_inner_box 0 inner_pos "c" use_parbox 0 use_makebox 0 width "1in" special "width" height "1in" height_special "totalheight" thickness "0.4pt" separation "3pt" shadowsize "4pt" framecolor "black" backgroundcolor "none" status open \begin_layout Plain Layout 回転した \end_layout \end_inset \end_layout \end_inset 枠付き文章と \begin_inset Flex Rotatebox status open \begin_layout Plain Layout \begin_inset Argument 1 status open \begin_layout Plain Layout origin=lb \end_layout \end_inset \begin_inset Argument 2 status open \begin_layout Plain Layout 60 \end_layout \end_inset \begin_inset Formula $\int A\,\mathrm{d}x=B$ \end_inset \end_layout \end_inset 数式を含む行です. \end_layout \begin_layout Standard あるいは,以下のように図や表を入れることもできます. \end_layout \begin_layout Standard これは, \begin_inset Flex Rotatebox status open \begin_layout Plain Layout \begin_inset Argument 1 status open \begin_layout Plain Layout origin=lb \end_layout \end_inset \begin_inset Argument 2 status open \begin_layout Plain Layout 90 \end_layout \end_inset \begin_inset Graphics filename ../clipart/platypus.eps lyxscale 50 width 25col% \end_inset \end_layout \end_inset 回転した画像と \begin_inset Flex Rotatebox status open \begin_layout Plain Layout \begin_inset Argument 2 status open \begin_layout Plain Layout -90 \end_layout \end_inset \begin_inset Tabular <lyxtabular version="3" rows="2" columns="2"> <features tabularvalignment="middle"> <column alignment="center" valignment="top"> <column alignment="center" valignment="top"> <row> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout q \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout w \end_layout \end_inset </cell> </row> <row> <cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout e \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout r \end_layout \end_inset </cell> </row> </lyxtabular> \end_inset \end_layout \end_inset 表を含む行です. \end_layout \begin_layout Standard \begin_inset Note Greyedout status open \begin_layout Plain Layout \series bold 【註】 \family sans \series default 角度 \family default 差込枠が空であったり,数字以外の文字が入っていたりした場合,文書を閲覧したり書き出したりする際に,\SpecialChar LaTeX エラーが発生します. \end_layout \end_inset \end_layout \begin_layout Subsection ボックスの伸縮 \begin_inset Index idx status collapsed \begin_layout Plain Layout ぼっくす@ボックス ! しんしゅくさせた@伸縮させた— \end_layout \end_inset \begin_inset Index idx status collapsed \begin_layout Plain Layout しんしゅく@伸縮 ! そざいの@素材の— \end_layout \end_inset \begin_inset Index idx status collapsed \begin_layout Plain Layout ず@図 ! のしんしゅく@—の伸縮 \end_layout \end_inset \begin_inset Index idx status collapsed \begin_layout Plain Layout ひょうのちょうせい@表の調整 ! しんしゅく@伸縮 \end_layout \end_inset \end_layout \begin_layout Standard ものを伸縮するならば, \family sans 伸縮ボックス \family default に入れることができます.このボックスは, \family sans 挿入\SpecialChar menuseparator 拡張差込枠\SpecialChar menuseparator 伸縮ボックス \family default で挿入することができます. \end_layout \begin_layout Standard \family sans 伸縮ボックス \family default には,必須差込枠「 \family sans 水平因子 \family default 」と,非必須差込枠「 \family sans 垂直因子 \family default 」(「 \family sans 挿入\SpecialChar menuseparator 垂直因子 \family default 」メニューで挿入可)がありますので,そこに水平因子と垂直因子を入力してください. \family sans 垂直因子 \family default を使わない場合には,水平因子が垂直因子としても使われます. \end_layout \begin_layout Standard たとえば,文書の本文の大きさに比べて,文を2倍の大きさにしたい場合, \family sans 水平因子 \family default 差込枠に \series bold 2 \series default と入力してください.例: \begin_inset Flex Scalebox status open \begin_layout Plain Layout \begin_inset Argument 1 status open \begin_layout Plain Layout 2 \end_layout \end_inset こんにちは \end_layout \end_inset \end_layout \begin_layout Standard \family sans 水平因子 \family default を \series bold 2 \series default , \family sans 垂直因子 \family default を \series bold 1 \series default にすると,このようにゆがみます: \begin_inset Flex Scalebox status open \begin_layout Plain Layout \begin_inset Argument 1 status open \begin_layout Plain Layout 2 \end_layout \end_inset \begin_inset Argument 2 status open \begin_layout Plain Layout 1 \end_layout \end_inset こんにちは \end_layout \end_inset \end_layout \begin_layout Standard 伸縮因子を負に設定した場合,ボックスの内容は鏡像になります.鏡文字を作りたい場合には, \family sans 水平因子 \family default を \series bold -1 \series default , \family sans 垂直因子 \family default を \series bold 1 \series default にします: \begin_inset Flex Scalebox status open \begin_layout Plain Layout \begin_inset Argument 1 status open \begin_layout Plain Layout -1 \end_layout \end_inset \begin_inset Argument 2 status open \begin_layout Plain Layout 1 \end_layout \end_inset こんにちは \end_layout \end_inset \end_layout \begin_layout Standard \family sans 水平因子 \family default を \series bold 1 \series default , \family sans 垂直因子 \family default を \series bold -1 \series default にすると,ベースラインでひっくり返した形になります: \begin_inset Flex Scalebox status open \begin_layout Plain Layout \begin_inset Argument 1 status open \begin_layout Plain Layout 1 \end_layout \end_inset \begin_inset Argument 2 status open \begin_layout Plain Layout -1 \end_layout \end_inset こんにちは \end_layout \end_inset \end_layout \begin_layout Standard \family sans 反転ボックス \family default (「 \family sans 挿入\SpecialChar menuseparator 拡張差込枠\SpecialChar menuseparator 反転ボックス \family default 」メニュー)は, \family sans 伸縮ボックス \family default で \family sans 水平因子 \family default を \series bold -1 \series default , \family sans 垂直因子 \family default を \series bold 1 \series default にしたものと同じです. \end_layout \begin_layout Standard \begin_inset Note Greyedout status open \begin_layout Plain Layout \series bold 【註】 \family sans \series default 水平因子 \family default 差込枠が空であったり,数字以外の文字が入っていたりした場合,文書を閲覧したり書き出したりする際に,\SpecialChar LaTeX エラーが発生します. \end_layout \end_inset \end_layout \begin_layout Standard \begin_inset VSpace bigskip \end_inset 中身を決まった幅と高さに伸縮したい場合には, \family sans 寸法変更ボックス \family default (「 \family sans 挿入\SpecialChar menuseparator 拡張差込枠\SpecialChar menuseparator 寸法変更ボックス \family default 」メニュー)を使うことができます. \family sans 寸法変更ボックス \family default には,必須差込枠「 \family sans 幅 \family default 」と,非必須差込枠「 \family sans 高さ \family default 」(「 \family sans 挿入\SpecialChar menuseparator 高さ \family default 」メニューで挿入可)がありますので,そこに幅と高さを単位付きの値で入力してください. \begin_inset CommandInset ref LatexCommand ref reference "tab:単位" \end_inset に使用できる単位が列挙してあります.2つの差込枠のいずれかに感嘆符 \series bold ! \series default があると,ボックス内容のアスペクト比が保たれるように寸法が設定されます. \family sans 高さ \family default 差込枠を使わない場合には,高さには内部的に感嘆符が使用されます. \end_layout \begin_layout Standard \series bold 2cm \series default を \family sans 幅 \family default に, \series bold 1cm \series default を \family sans 高さ \family default に使用するとこうなります: \begin_inset Flex Resizebox status open \begin_layout Plain Layout \begin_inset Argument 1 status open \begin_layout Plain Layout 2cm \end_layout \end_inset \begin_inset Argument 2 status open \begin_layout Plain Layout 1cm \end_layout \end_inset こんにちは \end_layout \end_inset \begin_inset Newline newline \end_inset \series bold 2cm \series default を \family sans 幅 \family default に, \series bold ! \series default を \family sans 高さ \family default に使用すると(あるいは \family sans 高さ \family default なし)こうなります: \begin_inset Flex Resizebox status open \begin_layout Plain Layout \begin_inset Argument 1 status open \begin_layout Plain Layout 2cm \end_layout \end_inset \begin_inset Argument 2 status open \begin_layout Plain Layout ! \end_layout \end_inset こんにちは \end_layout \end_inset \end_layout \begin_layout Standard \begin_inset Note Greyedout status open \begin_layout Plain Layout \series bold 【註】 \family sans \series default 幅 \family default 差込枠が空であったり,無効な単位が入っていたりした場合,文書を閲覧したり書き出したりする際に,\SpecialChar LaTeX エラーが発生します. \end_layout \end_inset \end_layout \begin_layout Standard \begin_inset VSpace bigskip \end_inset \end_layout \begin_layout Standard ボックスは好きな順序で組み合わせることができます. \family sans 回転ボックス \family default の中に \family sans 寸法変更ボックス \family default が入り,さらにその中に \family sans 反転ボックス \family default が入っている例です: \end_layout \begin_layout Standard \noindent \align center \begin_inset Flex Rotatebox status open \begin_layout Plain Layout \begin_inset Argument 1 status open \begin_layout Plain Layout origin=c \end_layout \end_inset \begin_inset Argument 2 status open \begin_layout Plain Layout -45 \end_layout \end_inset \begin_inset Flex Resizebox status open \begin_layout Plain Layout \begin_inset Argument 1 status open \begin_layout Plain Layout 2cm \end_layout \end_inset \begin_inset Flex Reflectbox status open \begin_layout Plain Layout こんにちは \end_layout \end_inset \end_layout \end_inset \end_layout \end_inset \end_layout \begin_layout Standard \noindent という出力になります.ボックスの内容には,以下のように,画像や表や行内数式を入れてもかまいません. \end_layout \begin_layout Standard \noindent \align center \begin_inset Flex Resizebox status open \begin_layout Plain Layout \begin_inset Argument 1 status open \begin_layout Plain Layout 2cm \end_layout \end_inset \begin_inset Flex Reflectbox status open \begin_layout Plain Layout \begin_inset Graphics filename ../clipart/platypus.eps lyxscale 50 width 25col% \end_inset \end_layout \end_inset \end_layout \end_inset \begin_inset Flex Resizebox status open \begin_layout Plain Layout \begin_inset Argument 1 status open \begin_layout Plain Layout 2cm \end_layout \end_inset \begin_inset Flex Reflectbox status open \begin_layout Plain Layout \begin_inset Tabular <lyxtabular version="3" rows="2" columns="2"> <features tabularvalignment="middle"> <column alignment="center" valignment="top"> <column alignment="center" valignment="top"> <row> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout q \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout w \end_layout \end_inset </cell> </row> <row> <cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout e \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout r \end_layout \end_inset </cell> </row> </lyxtabular> \end_inset \end_layout \end_inset \end_layout \end_inset \begin_inset Flex Resizebox status open \begin_layout Plain Layout \begin_inset Argument 1 status open \begin_layout Plain Layout 3cm \end_layout \end_inset \begin_inset Flex Reflectbox status open \begin_layout Plain Layout \begin_inset Formula $\int A\,\mathrm{d}x=B$ \end_inset \end_layout \end_inset \end_layout \end_inset \end_layout \begin_layout Standard 文書で大域的に数式様式 \series bold fleqn \series default を使用している場合 \begin_inset Foot status collapsed \begin_layout Plain Layout つまり,文書クラスオプションに「fleqn」を書き加えた場合. \end_layout \end_inset には,別行建て数式も伸縮させることができます. \end_layout \begin_layout Chapter 本文回り込みオブジェクト \begin_inset Index idx status collapsed \begin_layout Plain Layout ほんぶんまわりこみ@本文回り込み \end_layout \end_inset \end_layout \begin_layout Section 折返しフロート \begin_inset CommandInset label LatexCommand label name "sec:折返しフロート" \end_inset \begin_inset Index idx status collapsed \begin_layout Plain Layout ふろーと@フロート ! おりかえしふろーと@折返しフロート \end_layout \end_inset \begin_inset Index idx status collapsed \begin_layout Plain Layout ほんぶんまわりこみ@本文回り込み ! おりかえしふろーと@折返しフロート \end_layout \end_inset \end_layout \begin_layout Standard \begin_inset Wrap figure lines 0 placement l overhang 1cm width "40col%" status open \begin_layout Plain Layout \begin_inset Graphics filename ../clipart/mobius.eps width 40col% scaleBeforeRotation rotateOrigin center \end_inset \end_layout \begin_layout Plain Layout \begin_inset Caption Standard \begin_layout Plain Layout \begin_inset CommandInset label LatexCommand label name "fig:折返し図フロート" \end_inset これは折返し図フロートです. \end_layout \end_inset \end_layout \end_inset このフロート型は,本文が図の周りに折返して入ることによって,図が段幅の一部しか占拠しないようにしたいときに用います.折返しフロートは,\SpecialChar LaTeX パッケージの \series bold wrapfig \series default \begin_inset Index idx status collapsed \begin_layout Plain Layout \SpecialChar LaTeX ぱっけーじ@\SpecialChar LaTeX パッケージ ! wrapfig \end_layout \end_inset を導入済みであれば, \family sans 挿入\SpecialChar menuseparator フロート\SpecialChar menuseparator 折返し図フロート \family default ・ \family sans 折返し表フロート \family default メニューで挿入することができます \begin_inset Foot status collapsed \begin_layout Plain Layout \SpecialChar LaTeX パッケージの導入方法は,取扱説明書の『\SpecialChar LaTeX の設定』に説明されています. \end_layout \end_inset .フロートの設定は,フロートボックスを右クリックすることで変更することができます.必須の設定項目は,フロートの \family sans 配置 \family default と \family sans 幅 \family default です.非必須項目として, \family sans ぶら下げ \family default と \family sans 行幅 \family default があります.前者は,フロートがどれくらい段落ないしページ余白に入り込むかを指定するものであり,後者は,フロートが必要とするおおよその本文行数を指定するものです. 行幅は,推測するのが難しいことがよくあるので,フロートの配置に問題が生じたときのみ使用するようにした方が良いでしょう.さらに,フロートを段落内でフロートするよう にするか,周囲の段落までフロートすることを\SpecialChar LaTeX に許可するかを指定することができます.第 \begin_inset CommandInset ref LatexCommand ref reference "fig:折返し図フロート" \end_inset 図は,40 \begin_inset space \thinspace{} \end_inset 列幅%の幅と1 \begin_inset space \thinspace{} \end_inset cmのぶら下げを持ち,左揃えの折返しフロートを例示してあります. \end_layout \begin_layout Standard \begin_inset Note Greyedout status open \begin_layout Plain Layout \series bold 【註】 \series default 折返しフロートは壊れやすいことがあります!例えば,図をページの下すぎる位置に置いてしまうと,ごちゃごちゃになって,フロートが出力に現れなかったり,他の本文の上に 上書きされて出力されたりします. \end_layout \end_inset \end_layout \begin_layout Standard 原則として, \end_layout \begin_layout Itemize 折返しフロートは,改頁に掛かってしまう段落に置くべきではありません.つまり,折返しフロートは,文書がほぼ完成する段階になって,どこに改頁が現れるかを予測できるよ うになってから,正確な位置に挿入しなくてはなりません. \end_layout \begin_layout Itemize 折返しフロートは,入れ込む段落の前に単独の段落を設けて挿入するか,その段落自体の中に挿入しなくてはなりません. \end_layout \begin_layout Itemize 折返しフロートを二つの段落に連続して入れると問題を引き起こす可能性があるので,二つの折返しフロートのあいだには本文のみの段落が入るのようにしてください. \end_layout \begin_layout Itemize 折返しフロートは,節見出しや表中に入れることは認められていません. \end_layout \begin_layout Itemize 連番や参照は,第 \begin_inset CommandInset ref LatexCommand ref reference "chap:フロート" \end_inset 章で述べられているように動作します. \end_layout \begin_layout Section 固定回り込みオブジェクト \begin_inset Index idx status collapsed \begin_layout Plain Layout ほんぶんまわりこみ@本文回り込み ! こていおぶじぇくと@固定オブジェクト \end_layout \end_inset \end_layout \begin_layout Standard 第 \begin_inset CommandInset ref LatexCommand ref reference "sec:折返しフロート" \end_inset 節の折返しフロートは,段落中で,以下のような配置がされます. \end_layout \begin_layout Standard \noindent \align center \begin_inset Tabular <lyxtabular version="3" rows="2" columns="2"> <features tabularvalignment="middle"> <column alignment="center" valignment="top"> <column alignment="center" valignment="top"> <row> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \begin_inset Info type "icon" arg "dialog-show-new-inset graphics" \end_inset \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 文章 \end_layout \end_inset </cell> </row> <row> <cell alignment="center" valignment="top" bottomline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 文章 \end_layout \end_inset </cell> <cell alignment="center" valignment="top" bottomline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 文章 \end_layout \end_inset </cell> </row> </lyxtabular> \end_inset or \begin_inset Tabular <lyxtabular version="3" rows="2" columns="2"> <features tabularvalignment="middle"> <column alignment="center" valignment="top"> <column alignment="center" valignment="top"> <row> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 文章 \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \begin_inset Info type "icon" arg "dialog-show-new-inset graphics" \end_inset \end_layout \end_inset </cell> </row> <row> <cell alignment="center" valignment="top" bottomline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 文章 \end_layout \end_inset </cell> <cell alignment="center" valignment="top" bottomline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 文章 \end_layout \end_inset </cell> </row> </lyxtabular> \end_inset \end_layout \begin_layout Standard 以下に示すいずれかのように, \begin_inset VSpace defskip \end_inset \end_layout \begin_layout Standard \noindent \align center \begin_inset Tabular <lyxtabular version="3" rows="2" columns="2"> <features tabularvalignment="middle"> <column alignment="center" valignment="top"> <column alignment="center" valignment="top"> <row> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 文章 \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 文章 \end_layout \end_inset </cell> </row> <row> <cell alignment="center" valignment="top" bottomline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \begin_inset Info type "icon" arg "dialog-show-new-inset graphics" \end_inset \end_layout \end_inset </cell> <cell alignment="center" valignment="top" bottomline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 文章 \end_layout \end_inset </cell> </row> </lyxtabular> \end_inset \begin_inset Tabular <lyxtabular version="3" rows="2" columns="2"> <features tabularvalignment="middle"> <column alignment="center" valignment="top"> <column alignment="center" valignment="top"> <row> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 文章 \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 文章 \end_layout \end_inset </cell> </row> <row> <cell alignment="center" valignment="top" bottomline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 文章 \end_layout \end_inset </cell> <cell alignment="center" valignment="top" bottomline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \begin_inset Info type "icon" arg "dialog-show-new-inset graphics" \end_inset \end_layout \end_inset </cell> </row> </lyxtabular> \end_inset \begin_inset Tabular <lyxtabular version="3" rows="2" columns="3"> <features tabularvalignment="middle"> <column alignment="center" valignment="top"> <column alignment="center" valignment="top"> <column alignment="center" valignment="top"> <row> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 文章 \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \begin_inset Info type "icon" arg "dialog-show-new-inset graphics" \end_inset \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 文章 \end_layout \end_inset </cell> </row> <row> <cell alignment="center" valignment="top" bottomline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 文章 \end_layout \end_inset </cell> <cell alignment="center" valignment="top" bottomline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 文章 \end_layout \end_inset </cell> <cell alignment="center" valignment="top" bottomline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 文章 \end_layout \end_inset </cell> </row> </lyxtabular> \end_inset \begin_inset Tabular <lyxtabular version="3" rows="2" columns="3"> <features tabularvalignment="middle"> <column alignment="center" valignment="top"> <column alignment="center" valignment="top"> <column alignment="center" valignment="top"> <row> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 文章 \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 文章 \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 文章 \end_layout \end_inset </cell> </row> <row> <cell alignment="center" valignment="top" bottomline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 文章 \end_layout \end_inset </cell> <cell alignment="center" valignment="top" bottomline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \begin_inset Info type "icon" arg "dialog-show-new-inset graphics" \end_inset \end_layout \end_inset </cell> <cell alignment="center" valignment="top" bottomline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 文章 \end_layout \end_inset </cell> </row> </lyxtabular> \end_inset \end_layout \begin_layout Standard \noindent \align center \begin_inset Tabular <lyxtabular version="3" rows="3" columns="2"> <features tabularvalignment="middle"> <column alignment="center" valignment="top"> <column alignment="center" valignment="top"> <row> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 文章 \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 文章 \end_layout \end_inset </cell> </row> <row> <cell alignment="center" valignment="top" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \begin_inset Info type "icon" arg "dialog-show-new-inset graphics" \end_inset \end_layout \end_inset </cell> <cell alignment="center" valignment="top" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 文章 \end_layout \end_inset </cell> </row> <row> <cell alignment="center" valignment="top" bottomline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 文章 \end_layout \end_inset </cell> <cell alignment="center" valignment="top" bottomline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 文章 \end_layout \end_inset </cell> </row> </lyxtabular> \end_inset \begin_inset Tabular <lyxtabular version="3" rows="3" columns="3"> <features tabularvalignment="middle"> <column alignment="center" valignment="top"> <column alignment="center" valignment="top"> <column alignment="center" valignment="top"> <row> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 文章 \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 文章 \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 文章 \end_layout \end_inset </cell> </row> <row> <cell alignment="center" valignment="top" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 文章 \end_layout \end_inset </cell> <cell alignment="center" valignment="top" usebox="none"> \begin_inset Text \begin_layout Plain Layout \begin_inset Info type "icon" arg "dialog-show-new-inset graphics" \end_inset \end_layout \end_inset </cell> <cell alignment="center" valignment="top" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 文章 \end_layout \end_inset </cell> </row> <row> <cell alignment="center" valignment="top" bottomline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 文章 \end_layout \end_inset </cell> <cell alignment="center" valignment="top" bottomline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 文章 \end_layout \end_inset </cell> <cell alignment="center" valignment="top" bottomline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 文章 \end_layout \end_inset </cell> </row> </lyxtabular> \end_inset \begin_inset Tabular <lyxtabular version="3" rows="3" columns="2"> <features tabularvalignment="middle"> <column alignment="center" valignment="top"> <column alignment="center" valignment="top"> <row> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 文章 \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 文章 \end_layout \end_inset </cell> </row> <row> <cell alignment="center" valignment="top" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 文章 \end_layout \end_inset </cell> <cell alignment="center" valignment="top" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \begin_inset Info type "icon" arg "dialog-show-new-inset graphics" \end_inset \end_layout \end_inset </cell> </row> <row> <cell alignment="center" valignment="top" bottomline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 文章 \end_layout \end_inset </cell> <cell alignment="center" valignment="top" bottomline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 文章 \end_layout \end_inset </cell> </row> </lyxtabular> \end_inset \end_layout \begin_layout Standard \noindent オブジェクトを挿入した場所に正確に配置したい時には, \series bold picinpar \series default \begin_inset Index idx status collapsed \begin_layout Plain Layout \SpecialChar LaTeX ぱっけーじ@\SpecialChar LaTeX パッケージ ! picinpar \end_layout \end_inset \SpecialChar LaTeX パッケージを使うことができます.下記はその用例です. \end_layout \begin_layout Standard \begin_inset ERT status collapsed \begin_layout Plain Layout \backslash ifpicinpar \end_layout \end_inset \begin_inset Note Note status open \begin_layout Plain Layout 以下の部分は,\SpecialChar LaTeX パッケージ \series bold picinpar \series default が導入されているときのみ表示されます. \end_layout \end_inset \end_layout \begin_layout Standard \begin_inset ERT status collapsed \begin_layout Plain Layout \backslash begin{window}[2,c,{ \end_layout \end_inset \begin_inset Graphics filename ../clipart/mobius.eps lyxscale 60 width 40col% scaleBeforeRotation rotateOrigin center \end_inset \begin_inset ERT status collapsed \begin_layout Plain Layout },] \end_layout \begin_layout Plain Layout {} \end_layout \end_inset \size small It was in the spring of the year 1894 that all London was interested, and the fashionable world dismayed, by the murder of the Honourable Ronald Adair under most unusual and inexplicable circumstances. The public has already learned those particulars of the crime which \size default \begin_inset ERT status collapsed \begin_layout Plain Layout \backslash footnotemark{} \end_layout \end_inset \size small came out in the police investigation, but a good deal was suppressed upon that occasion, since the case for the prosecution was so overwhelmingly strong that it was not necessary to bring forward all the facts. Only now, at the end of nearly ten years, am I allowed to supply those missing links which make up the whole of that remarkable chain. \size default \begin_inset ERT status collapsed \begin_layout Plain Layout \backslash end{window} \end_layout \end_inset \end_layout \begin_layout Standard \begin_inset ERT status collapsed \begin_layout Plain Layout \backslash footnotetext{ \end_layout \end_inset 固定オブジェクトのある段落の脚註 \begin_inset ERT status collapsed \begin_layout Plain Layout } \end_layout \end_inset \end_layout \begin_layout Standard 固定回り込みオブジェクトは,オブジェクトの周りに本文を流しこむのに用いられ,段落中のオブジェクトの位置は,オブジェクトの上の行数を指定することで決定します.フロ ートとは違って,連番のキャプションをつけることはできません. \end_layout \begin_layout Standard 固定オブジェクトは,段落冒頭に\SpecialChar TeX コードで \end_layout \begin_layout Standard \series bold \backslash begin{window}[2,c,{ \end_layout \begin_layout Standard というコマンドを書くことによって挿入されます.角括弧中の最初のパラメータ(ここでは「2」)は,オブジェクト上に来る行数を指定し,二番目のパラメータ(ここでは「c 」)はオブジェクトの位置を示します.位置としては,「l」「c」「r」が可能です(それぞれ左・中央・右).このコマンドの後にオブジェクトを挿入します.この例では, 段幅の40 \begin_inset space \thinspace{} \end_inset %の画像が挿入されています.オブジェクトは,表やボックス,数式でも構いません.オブジェクトの後には, \end_layout \begin_layout Standard \series bold },説明文] \begin_inset Newline newline \end_inset {} \end_layout \begin_layout Standard というコマンドが挿入されています.2行目に「 \series bold {} \series default 」が入っていることに注意してください.説明文は非必須です.オブジェクトに回り込む文章は,オブジェクトと同じ段落になくてはなりませんので, \series bold {} \series default の直後から書き始めてください.段落末には, \end_layout \begin_layout Standard \series bold \backslash end{window} \end_layout \begin_layout Standard というコマンドを挿入してください.固定オブジェクトのある段落では,通常のように脚註を挿入することはできません.第 \begin_inset CommandInset ref LatexCommand ref reference "sec:脚注" \end_inset 節にあるように,代わりに,段落内で \series bold \backslash footnotemark \series default コマンドを使用し,段落外に \series bold \backslash footnotetext \series default コマンドを用いてください. \end_layout \begin_layout Standard \begin_inset ERT status collapsed \begin_layout Plain Layout \backslash else \end_layout \end_inset \begin_inset Note Note status open \begin_layout Plain Layout 以下の部分は,\SpecialChar LaTeX パッケージ \series bold picinpar \series default が導入されていないときのみ表示されます. \end_layout \end_inset \end_layout \begin_layout Standard 本節の以下の部分を出力に表示するには,\SpecialChar LaTeX パッケージ \series bold picinpar \series default を導入する必要があります. \end_layout \begin_layout Standard \begin_inset ERT status collapsed \begin_layout Plain Layout \backslash fi \end_layout \end_inset \end_layout \begin_layout Section 頭文字 \begin_inset Index idx status collapsed \begin_layout Plain Layout かしらもじ@頭文字 \end_layout \end_inset \begin_inset Index idx status collapsed \begin_layout Plain Layout ほんぶんまわりこみ@本文回り込み ! かしらもじ@頭文字 \end_layout \end_inset \end_layout \begin_layout Standard 頭文字を用いるには,\SpecialChar LaTeX パッケージ \begin_inset Index idx status collapsed \begin_layout Plain Layout \SpecialChar LaTeX ぱっけーじ@\SpecialChar LaTeX パッケージ ! lettrine \end_layout \end_inset が導入済みでなくてはならず,文書中で \family sans 頭文字 \family default モジュールを使用する必要があります( \family sans 文書\SpecialChar menuseparator 設定\SpecialChar menuseparator モジュール \family default メニュー).頭文字を挿入するには, \family sans 頭文字 \family default 様式を使用してください.この様式には,1つの必須引数と2つの非必須引数があります.引数は, \family sans 挿入 \family default メニューから挿入できます.必須引数 \family sans 頭文字 \family default には,頭文字にする文字を入れ,引数 \family sans 頭文字の残り \family default には,頭文字の単語若しくは文字列の残りが入ります.引数 \family sans オプション \family default には,頭文字を修正するパラメータが入ります.使うことができるパラメータについての詳細は, \series bold lettrine \series default の取扱説明書 \begin_inset CommandInset citation LatexCommand cite key "lettrine" literal "true" \end_inset をご覧ください.この様式の段落そのものに,頭文字に回り込む文章も入れます.通常,この様式では,最初の文字を頭文字とする単語全体が, \shape smallcaps スモールキャップ体(small caps \shape default )で印字されます. \end_layout \begin_layout Standard 下記がその例です. \end_layout \begin_layout Standard \begin_inset ERT status collapsed \begin_layout Plain Layout \backslash iflettrine \end_layout \end_inset \begin_inset Note Note status open \begin_layout Plain Layout 以下の部分は,\SpecialChar LaTeX パッケージ \series bold lettrine \series default が導入されているときのみ表示されます. \end_layout \end_inset \end_layout \begin_layout Enumerate 非必須引数なし.頭文字は,数式フォント \begin_inset Formula $\mathfrak{Fraktur}$ \end_inset の「I」. \end_layout \begin_deeper \begin_layout Initial \begin_inset Argument 2 status open \begin_layout Plain Layout \begin_inset Formula $\mathfrak{I}$ \end_inset \end_layout \end_inset \begin_inset Argument 3 status open \begin_layout Plain Layout t \end_layout \end_inset was in the spring of the year 1894 that all London was interested, and the fashionable world dismayed, by the murder of the Honourable Ronald Adair under most unusual and inexplicable circumstances. The public has already learned those particulars of the crime which came out in the police investigation, but a good deal was suppressed upon that occasion, since the case for the prosecution was so overwhelmingly strong that it was not necessary to bring forward all the facts. \begin_inset Newpage newpage \end_inset \end_layout \end_deeper \begin_layout Enumerate 頭文字に回り込む行は1行のみ.頭文字は標準フォントで2文字.スモールキャップ体で印字する文字はなし. \end_layout \begin_deeper \begin_layout Initial \begin_inset Argument 1 status open \begin_layout Plain Layout lines=1 \end_layout \end_inset \begin_inset Argument 2 status open \begin_layout Plain Layout It \end_layout \end_inset was in the spring of the year 1894 that all London was interested, and the fashionable world dismayed, by the murder of the Honourable Ronald Adair under most unusual and inexplicable circumstances. The public has already learned those particulars of the crime which came out in the police investigation, but a good deal was suppressed upon that occasion, since the case for the prosecution was so overwhelmingly strong that it was not necessary to bring forward all the facts. \end_layout \end_deeper \begin_layout Enumerate ぶら下がり頭文字は,数式フォント \begin_inset Formula $\mathcal{CALLIGRAPHIC}$ \end_inset で3行にかかり,マゼンタ色.「t was in the spring」という文章を \shape smallcaps スモールキャップ体 \shape default .頭文字に色をつけるには,頭文字の前に \begin_inset Newline newline \end_inset \series bold \backslash renewcommand{ \backslash LettrineFontHook}{ \backslash color{色}} \series default \begin_inset Newline newline \end_inset というコマンドを挿入しなくてはなりません.ここで, \emph on 色 \emph default は「red」・「blue」・「green」・「yellow」・「cyan」・「magenta」・「black」・「white」のいずれかです.また,文書プリアン ブルに \begin_inset Newline newline \end_inset \series bold \backslash @ifundefined{textcolor} \begin_inset Newline newline \end_inset \begin_inset space ~ \end_inset { \backslash usepackage{color}}{} \begin_inset Newline newline \end_inset \series default というコマンドを書きこんでおかなくてはなりません. \end_layout \begin_deeper \begin_layout Standard \begin_inset ERT status collapsed \begin_layout Plain Layout \backslash renewcommand{ \backslash LettrineFontHook}{ \backslash color{magenta}} \end_layout \end_inset \begin_inset Note Note status collapsed \begin_layout Plain Layout \lang english makes the initial magenta \end_layout \end_inset \end_layout \begin_layout Initial \begin_inset Argument 1 status open \begin_layout Plain Layout lines=3, lhang=0.33, loversize=0.25 \end_layout \end_inset \begin_inset Argument 2 status open \begin_layout Plain Layout \begin_inset Formula $\mathcal{I}$ \end_inset \end_layout \end_inset \begin_inset Argument 3 status open \begin_layout Plain Layout t was in the spring \end_layout \end_inset of the year 1894 that all London was interested, and the fashionable world dismayed, by the murder of the Honourable Ronald Adair under most unusual and inexplicable circumstances. The public has already learned those particulars of the crime which came out in the police investigation, but a good deal was suppressed upon that occasion, since the case for the prosecution was so overwhelmingly strong that it was not necessary to bring forward all the facts. \end_layout \end_deeper \begin_layout Standard \begin_inset ERT status collapsed \begin_layout Plain Layout \backslash else \end_layout \end_inset \begin_inset Note Note status open \begin_layout Plain Layout 以下の部分は,\SpecialChar LaTeX パッケージ \series bold lettrine \series default が導入されていないときのみ表示されます. \end_layout \end_inset \end_layout \begin_layout Standard 本節の以下の部分を出力に表示するには,\SpecialChar LaTeX パッケージ \series bold lettrine \series default を導入する必要があります. \end_layout \begin_layout Standard \begin_inset ERT status collapsed \begin_layout Plain Layout \backslash fi \end_layout \end_inset \end_layout \begin_layout Chapter 外部文書構成要素 \begin_inset Index idx status collapsed \begin_layout Plain Layout がいぶぶんしょこうせいようそ@外部文書構成要素 \end_layout \end_inset \end_layout \begin_layout Standard \family sans 挿入\SpecialChar menuseparator ファイル \family default メニューを使うと,使用中の文書に外部素材を挿入することができます.挿入できるのは, \end_layout \begin_layout Description \SpecialChar LyX 文書 別の\SpecialChar LyX 文書.その内容は直接使用中の文書に挿入されます. \end_layout \begin_layout Description 平文 テキスト文書.そのテキスト行各々が,使用中の文書に独立した段落として挿入されます. \end_layout \begin_layout Description 平文(行を連結して) テキスト文書.各テキスト行がその形のまま挿入されます.空の行があると,使用中の文書に新規段落を生成します. \end_layout \begin_layout Description 外部素材 様々な書式のファイル. \end_layout \begin_layout Description 子文書 \SpecialChar LyX あるいは\SpecialChar LaTeX 文書. \end_layout \begin_layout Section 外部素材 \begin_inset Index idx status collapsed \begin_layout Plain Layout がいぶぶんしょこうせいようそ@外部文書構成要素 ! がいぶそざい@外部素材 \end_layout \end_inset \end_layout \begin_layout Standard 外部素材機能は,文書の出力書式が読むことのできる形式に前もって変換しなくても,\SpecialChar LyX が必要な変換を行うことで,使用中の文書にファイルを挿入することができるようにするも のです.これは,画像が様々な画像形式のままで\SpecialChar LyX 文書に挿入することができるのと同様の働きをします.\SpecialChar LyX 設定の \family sans 操作性\SpecialChar menuseparator 表示 \family default で自動プレビューを有効にすると,外部素材のDia形式とXfig形式は,直接\SpecialChar LyX 中に表示されるようになります. \end_layout \begin_layout Standard 外部素材は, \family sans 挿入 \family default \SpecialChar menuseparator \family sans ファイル \family default \SpecialChar menuseparator \family sans 外部素材 \family default メニューで開くことのできる \family sans 外部素材 \family default ダイアログから挿入することができます.目下,以下のファイル形式( \family sans ひな型 \family default )が使用できます. \end_layout \begin_layout Description チェス棋譜 このひな型は, \series bold \begin_inset CommandInset href LatexCommand href name "XBoard" target "http://en.wikipedia.org/wiki/XBoard" literal "false" \end_inset \series default プログラムで作成されたチェス棋譜をサポートします. \end_layout \begin_layout Description 日付 これは, \emph on 日-月-年 \emph default の書式で日付を挿入します.右は,外部素材として挿入された日付です: \begin_inset ERT status collapsed \begin_layout Plain Layout \backslash today \end_layout \end_inset \begin_inset space ~ \end_inset \begin_inset Note Note status collapsed \begin_layout Plain Layout バグ4398が修正されたら,この保護空白は削除してください! \end_layout \end_inset \begin_inset Newline newline \end_inset 日付は\SpecialChar LyX 内では表示されず,出力のみで表示されます.日付を挿入するには,ほかに二つの方法があります.一つは, \family sans 挿入 \family default \SpecialChar menuseparator 日付メニューを使用する方法で,他は\SpecialChar LaTeX コマンドの \series bold \backslash today \series default を\SpecialChar TeX コードで使用する方法です.これらの各方法は,表 \begin_inset CommandInset ref LatexCommand ref reference "tab:日付挿入方法" \end_inset に比較を掲載しておきます. \end_layout \begin_layout Description Dia このひな型は, \series bold \begin_inset CommandInset href LatexCommand href name "Dia" target "http://ja.wikipedia.org/wiki/Dia_%28%E3%82%BD%E3%83%95%E3%83%88%E3%82%A6%E3%82%A7%E3%82%A2%29" literal "false" \end_inset \series default プログラムで作成したダイアグラムをサポートします. \end_layout \begin_layout Description Gnumeric表計算表 このひな形では, \series bold \begin_inset CommandInset href LatexCommand href name "Gnumeric" target "http://ja.wikipedia.org/wiki/Gnumeric" literal "false" \end_inset \series default ・ \begin_inset CommandInset href LatexCommand href name "OpenDocument" target "http://ja.wikipedia.org/wiki/OpenDocument" literal "false" \end_inset ・ \begin_inset CommandInset href LatexCommand href name "Microsoft Office XML" target "http://en.wikipedia.org/wiki/Microsoft_Office_XML_formats" literal "false" \end_inset ・ \begin_inset CommandInset href LatexCommand href name "Office Open XML" target "http://ja.wikipedia.org/wiki/Office_Open_XML" literal "false" \end_inset 形式の表計算表を挿入することができます.この機能を使用するには,\SpecialChar LyX の初期設定中に \family typewriter ssconvert \family default プログラムが検出される必要があります.このプログラムはGnumericの一部ですので,Gnumeric以外の形式の表を読み込む場合には,Gnumericが導入済 みである必要があります.用例と制約については,\SpecialChar LyX 用例ファイル \emph on spreadsheet.lyx \emph default をご覧ください. \end_layout \begin_layout Description Lilypond組版楽譜 このひな型は, \series bold \begin_inset CommandInset href LatexCommand href name "LilyPond" target "http://ja.wikipedia.org/wiki/GNU_LilyPond" literal "false" \end_inset \series default プログラムで作成した楽譜の組版に使用されます.\SpecialChar LyX におけるLilyPond拡張サポートについては,\SpecialChar LyX 用例ファイル \emph on lilypond.lyx \emph default をご覧ください. \end_layout \begin_layout Description PDFページ このひな型を使えば,PDF文書を使用中の文書に挿入することができます.PDFの一部頁ないし全頁を挿入するには,ダイアログ中のひな型の解説に沿って, \family sans \SpecialChar LaTeX と\SpecialChar LyX オプション \family default タブ中の \family sans オプション \family default フィールドに \emph on pages \emph default オプションを指定してください.このオプションの引数は,コンマ区切りのリストで,ページ番号(オプションを \series bold pages={3,5,6,8} \series default の形で入れる)やページ範囲( \series bold pages={4-9} \series default ),あるいはこれらの組み合わせで指定できます.空のページを入れるには,{}を指定してください.例えば, \series bold pages={3,{},8-11,15} \series default は,3ページ目と空のページ,8・9・10・11・15ページ目を挿入します.ページ範囲は, \emph on 開始頁-終了頁 \emph default の文法で指定します.これは, \emph on 開始頁 \emph default と \emph on 終了頁 \emph default の間のすべてのページを選択します. \emph on 開始頁 \emph default を省略すると,1ページ目を指定したのと同じ事になり, \emph on 終了頁 \emph default を省略すると,文書の最終ページを指定したのと同じ事になります.最終ページは, \series bold last \series default というキーワードを使って指定することもできます(これはページ範囲指定のみで有効です).したがって, \series bold pages=- \series default は文書の全ページを挿入することになり, \series bold pages=last-1 \series default は全ページを逆順で挿入します.pagesオプションを指定しないと,PDFの最初のページのみが挿入されます. \begin_inset Newline newline \end_inset \series bold noautoscale \series default オプションは,各ページを元々の寸法で挿入します.もしこのオプションが指定されていなければ,各ページは文書のページ幅に合うように大きさが変更されます. \family sans 寸法と回転 \family default タブでは,取り込むページの縦横の大きさと回転角を指定することができます.100縮尺%以外の幅が指定されると, \series bold noautoscale \series default オプションは無視されます.詳しい情報と取り得るオプション値については,\SpecialChar LaTeX パッケージ \series bold pdfpages \series default の取扱説明書 \begin_inset CommandInset citation LatexCommand cite key "pdfpages" literal "true" \end_inset をご参照ください. \begin_inset Index idx status collapsed \begin_layout Plain Layout \SpecialChar LaTeX ぱっけーじ@\SpecialChar LaTeX パッケージ ! pdfpages \end_layout \end_inset \begin_inset Newline newline \end_inset このひな型を \family sans Beamer \family default プレゼンテーションで使用するには,まず \family sans フレーム終了 \family default 環境を挿入して,続く段落で\SpecialChar TeX コードボックスを挿入し, \series bold \backslash setbeamertemplate{background canvas}{} \series default というコマンドを入力してください.すると,PDFページのひな型を含んだ段落を好きなだけ入れることができるようになります.取り込んだPDFページの後で,新しいフレ ームを開始するか,新しい節を開始することによって,Beamerプレゼンテーションに復帰することができます.PDFページの前に空白ページができてしまうのを防ぐため に,ひな型を含む段落には, \family sans 既定 \family default 配置を用いるようにしてください. \begin_inset Newline newline \end_inset 下記は,-5度回転させたPDFを取り込んだものです. \begin_inset Newline newline \end_inset \begin_inset Graphics filename ../clipart/Abstract.pdf rotateAngle -5 rotateOrigin leftBottom \end_inset \begin_inset Newline newline \end_inset \begin_inset Note Greyedout status open \begin_layout Plain Layout \series bold 【訳註】 \series default \SpecialChar LaTeX パッケージ \series bold pdfpages \series default は,pdflatexに基づいており,\SpecialChar LaTeX では組版ができない(\SpecialChar LaTeX パッケージ \series bold pdfpages \series default 取扱説明書 \begin_inset CommandInset citation LatexCommand cite key "pdfpages" literal "true" \end_inset 参照)ため,この外部素材はp\SpecialChar LaTeX では使用することができません.英文版の取扱説明書では,上記のPDFは, \family sans 挿入\SpecialChar menuseparator ファイル\SpecialChar menuseparator 外部素材 \family default で \family sans ひな型 \family default に \family sans PDFページ \family default を指定して挿入されていますが,ここでは \family sans 挿入\SpecialChar menuseparator 画像 \family default を使用して挿入しています. \end_layout \end_inset \end_layout \begin_layout Description ラスター画像 これはビットマップ画像に使用します. \family sans 外部素材 \family default ダイアログを使って入れる画像は,第 \begin_inset CommandInset ref LatexCommand ref reference "sec:画像ダイアログ" \end_inset 節にあるように \family sans 画像 \family default ダイアログを使って挿入される画像と同じように取り扱うことができます.右記は,ラスター画像を挿入した例です. \begin_inset External template RasterImage filename clipart/ToolbarEnvBox.png \end_inset \end_layout \begin_layout Description ベクトル画像 これは,ベクトル画像に使用することができます. \family sans 外部素材 \family default ダイアログを使って入れる画像は,第 \begin_inset CommandInset ref LatexCommand ref reference "sec:画像ダイアログ" \end_inset 節にあるように \family sans 画像 \family default ダイアログを使って挿入される画像と同じように取り扱うことができます.右記は,ベクトル画像を挿入した例です. \begin_inset External template VectorGraphics filename ../clipart/SVG-Drawing.svg lyxscale 50 scale 33 \end_inset \end_layout \begin_layout Description XFig このひな型は, \begin_inset CommandInset href LatexCommand href name "Xfig" target "http://ja.wikipedia.org/wiki/Xfig" literal "false" \end_inset プログラムで作成した画像をサポートします. \end_layout \begin_layout Description Inkscape \lang english This experimental template supports vector graphics (SVG) images that contain text written in \SpecialChar LaTeX . It relies on the option \family sans Omit text in PDF and create LaTeX file \family default when saving a drawing as PDF with the program \noun on Inkscape \noun default , \begin_inset CommandInset citation LatexCommand cite key "Inkscape" literal "false" \end_inset . This allows to include SVG documents in which \SpecialChar LaTeX will typeset the text. The benefit of such SVGs is a uniform text style throughout the whole document \begin_inset Newline newline \end_inset One can use \SpecialChar TeX code commands like \series bold \backslash Large \series default , \series bold \backslash small \series default , etc. \begin_inset space \space{} \end_inset in the text of the SVG. The size of the font will be taken from the settings of the \SpecialChar LyX document. Refer to \begin_inset CommandInset citation LatexCommand cite key "Inkscape" literal "false" \end_inset for more information and examples. \begin_inset Newline newline \end_inset Note that while the image text takes into account the surrounding font, its preview in \SpecialChar LyX does not. Wrapping the external inset in a preview inset (menu \family sans Insert\SpecialChar menuseparator Preview \family default ) gives a better result. \begin_inset Newline newline \end_inset The template works very similarly to Xfig support. \SpecialChar LyX will extract the text in the image into a separate \SpecialChar TeX file and creates a PDF file for the rest. \end_layout \begin_layout Standard \begin_inset Float table placement !h wide false sideways false status open \begin_layout Plain Layout \begin_inset Caption Standard \begin_layout Plain Layout \begin_inset CommandInset label LatexCommand label name "tab:日付挿入方法" \end_inset 日付の挿入方法の比較 \end_layout \end_inset \end_layout \begin_layout Plain Layout \align center \begin_inset Tabular <lyxtabular version="3" rows="4" columns="4"> <features tabularvalignment="middle"> <column alignment="center" valignment="top"> <column alignment="center" valignment="top"> <column alignment="center" valignment="top"> <column alignment="center" valignment="top"> <row> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 文書書式 \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \family sans 外部素材\SpecialChar menuseparator 日付 \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \family sans 挿入\SpecialChar menuseparator 日付 \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \series bold \backslash today \series default コマンド \end_layout \end_inset </cell> </row> <row> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \SpecialChar LyX \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 差込枠として \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 日付として \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \SpecialChar TeX コード差込枠として \end_layout \end_inset </cell> </row> <row> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \SpecialChar LaTeX \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 日付として \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 日付として \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout コマンドとして \end_layout \end_inset </cell> </row> <row> <cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout DVI, PDF, PS \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 日付として \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 日付として \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 日付として \end_layout \end_inset </cell> </row> </lyxtabular> \end_inset \end_layout \end_inset \end_layout \begin_layout Standard \family sans 外部素材 \family default ダイアログの \family sans ファイル \family default タブ中で \family sans 下書き \family default オプションを指定すると,出力中には挿入したファイルのパスだけが表示されます. \begin_inset Newline newline \end_inset \SpecialChar LyX 中での外部素材は,ダイアログ内の \family sans LaTeXとLyXのオプション \family default タブにある \family sans LyX内に表示 \family default オプションの指定に従って, \begin_inset Graphics filename clipart/ExternalMaterial.png scale 95 scaleBeforeRotation \end_inset のようなボックスとして表示されるか,画像として表示されます. \end_layout \begin_layout Standard 取扱説明書 \family sans \emph on カスタマイズ篇 \family default \emph default には,自製のひな型を定義する方法が説明されています. \end_layout \begin_layout Section 子文書 \begin_inset CommandInset label LatexCommand label name "sec:子文書" \end_inset \begin_inset Index idx status collapsed \begin_layout Plain Layout がいぶぶんしょこうせいようそ@外部文書構成要素 ! こぶんしょ@子文書 \end_layout \end_inset \begin_inset Index idx status collapsed \begin_layout Plain Layout ふぁいる@ファイル ! いんくるーど@インクルード \end_layout \end_inset \end_layout \begin_layout Standard 子文書は,大きな部や節を複数含む長大な文書を作成するときに使われます.メンテナンス上の理由から,文書をいくつかのファイルに分割して,個別に修正できるようにした方 が便利なことはよくあり,場合によってはそうすることが必要な場合さえあります.こうした個別文書がいわゆる「子文書」であり,親文書はこれら子文書を連結して,文書全体 やその一部を印刷できるようにします.子文書は,\SpecialChar LaTeX プリアンブルや書誌情報や相互参照用ラベルなどの親文書の内容を引き継ぎます. \end_layout \begin_layout Standard 親文書を開くことなく子文書で作業できるようにするには,子文書の \family sans 文書 \family default \SpecialChar menuseparator \family sans 設定 \family default \SpecialChar menuseparator \family sans 文書クラス \family default メニューで親文書を指定してください.すると,子文書を編集する際には,\SpecialChar LyX がバックグラウンドでこの親文書を扱うようになります. \end_layout \begin_layout Standard 取り込んだ文書は,\SpecialChar LyX 中で \begin_inset Graphics filename clipart/ChildDocument.png scale 95 scaleBeforeRotation \end_inset のようなボックスとして表示されます.子文書を親文書に取り込むには, \family sans 挿入 \family default \SpecialChar menuseparator \family sans ファイル \family default \SpecialChar menuseparator \family sans 子文書 \family default メニューを使用します.するとダイアログが現れ,以下のように4つの取り込み方法を選択することができます. \end_layout \begin_layout Description 内包(include) \SpecialChar LyX 文書と\SpecialChar LaTeX 文書は,内包することができます. \family sans 子文書 \family default ダイアログの \family sans 編集 \family default ボタンを押すと,内包された文書が,\SpecialChar LyX 中に新規ファイルタブとして開き,修正ができるようになります. \begin_inset Newline newline \end_inset \end_layout \begin_layout Standard 以下は, \family sans 内包(include) \family default を使用して挿入した子文書です. \begin_inset CommandInset include LatexCommand include filename "DummyDocument1.lyx" \end_inset \end_layout \begin_layout Standard 取り込んだファイルの節番は,各節を親文書に挿入した順序にしたがって取り込まれます.たとえば,上で取り込まんだ例示文書には,この節の小節として番号を振られた小節が あります.取り込んだ文書のラベルは,第 \begin_inset CommandInset ref LatexCommand ref reference "subsec:外部文書の第1小節" \end_inset 小節,のように参照することができます. \end_layout \begin_layout Standard 子文書のプリアンブルは無視され,親文書のプリアンブルだけが使用されます.親文書に同じ名称の派生枝がない限り,親文書は子文書の派生枝を無視します.取り込まれた文書 は,新規頁から始まるように挿入され,改頁して終わります. \end_layout \begin_layout Standard \begin_inset Note Greyedout status open \begin_layout Plain Layout \series bold 【註】 \series default \SpecialChar LyX または\SpecialChar LaTeX ファイルを内包する際,子文書が親文書と異なる文書クラスを使用している場合には,予期せぬ出力を避けるために,文書を書き出したり閲覧する際に警告が発せられます . \end_layout \end_inset \end_layout \begin_layout Description 入力(input) この方法は,内包による方法に非常によく似ています.異なっている点は, \end_layout \begin_deeper \begin_layout Itemize 入力ファイルは,新規頁として始まることはなく,終わりに改頁されることもありません. \end_layout \begin_layout Itemize 入力ファイルは,\SpecialChar LyX 設定の操作性 \family sans \SpecialChar menuseparator 表示 \family default の下にある \family sans 画像を表示 \family default を有効にすると,\SpecialChar LyX 中でプレビューすることができます. \end_layout \begin_layout Itemize \SpecialChar LaTeX コマンドの \series bold \backslash includeonly \series default は使用することができません. \end_layout \end_deeper \begin_layout Standard 右は, \family sans 入力(input) \family default を使って挿入した子文書です. \begin_inset CommandInset include LatexCommand input filename "DummyDocument2.lyx" \end_inset \end_layout \begin_layout Description 原文儘(verbatim) この方法では,テキストファイルなら何でも取り込むことができます.出力中では,ファイルはそのソースコードの通りに表示され,テキスト中に 用いられているコマンドは実行されません. \family sans 出力の空白に印付けをする \family default オプションを有効にすると,ソースコード中のすべての空白文字に「 \begin_inset ERT status collapsed \begin_layout Plain Layout \backslash textvisiblespace \end_layout \end_inset 」文字を表示させることができます. \family sans 挿入\SpecialChar menuseparator ファイル\SpecialChar menuseparator 平文 \family default メニューを使う方法との違いは,こちらは文書の内容が\SpecialChar LyX 中に表示されないことです. \end_layout \begin_layout Standard 以下は,原文儘として挿入された子文書です. \begin_inset CommandInset include LatexCommand verbatiminput filename "../DummyTextDocument.txt" \end_inset \begin_inset VSpace bigskip \end_inset 以下は, \family sans 出力の空白に印付けをする \family default オプションを指定して,原文儘として挿入された子文書です. \begin_inset CommandInset include LatexCommand verbatiminput* filename "../DummyTextDocument.txt" \end_inset \end_layout \begin_layout Standard \begin_inset VSpace bigskip \end_inset \end_layout \begin_layout Standard \begin_inset Note Greyedout status open \begin_layout Plain Layout \series bold 【註】 \series default 上記の例でわかるように, \family sans 原文儘(verbatim) \family default として取り込んだ文書の文章は,文書行の終わりで改行されません. \end_layout \end_inset \end_layout \begin_layout Standard \begin_inset Note Greyedout status open \begin_layout Plain Layout \series bold 【訳註】 \series default 原文儘で日本語のファイルを読み込むときは,子文書のエンコーディングを文書エンコーディングに合わせてください.さもないと出力が文字化けします. \end_layout \end_inset \end_layout \begin_layout Description プログラムリスト この型については,第 \begin_inset CommandInset ref LatexCommand ref reference "cha:プログラムコードリスト" \end_inset 章に説明されています. \end_layout \begin_layout Standard \begin_inset Note Greyedout status open \begin_layout Plain Layout \series bold 【註】 \series default 同一文書中に,同じ文書を異なる方法で二度取り込むと,\SpecialChar LaTeX で問題が発生する可能性があります. \end_layout \end_inset \end_layout \begin_layout Standard コンパイル時間を短縮したり,執筆中のbookの特定の章のみを配布したいなどの理由で,親文書内の特定の子文書のみを表示させたり書きだしたりしたい場合には,子文書の 一部を出力から排除することができます.これは, \family sans 文書\SpecialChar menuseparator 設定\SpecialChar menuseparator 子文書 \family default メニューから行うことができます.そこの一覧中の各子文書の \family sans 出力に含める \family default 列をダブルクリックすることによって,その子文書を排除したり取り込んだりすることができます(これは「入力」ではなく「内包」で埋めこまれた文書に対してのみ機能するこ とにご注意ください). \family sans カウンタと引用を維持 \family default オプションを有効にすると,\SpecialChar LyX は,すべてのページ番号と参照等が,文書全体を処理した時と同じように正しくなるようにします.これは,選択した部分文書が,文書全体のコンテ クストの中で表現されるのと全く同じようにしておきたい時に便利です.しかしながら,この機能を実現するには,\SpecialChar LyX はバックグラウンドで文書全体を処理しなくてはなりません. したがって,コンパイルの時間を節約し,カウンタや参照が必ずしも正しくなくてもいい場合には,このチェックボックスは外しておいてください. \end_layout \begin_layout Standard あるいは,取り込んだファイルの各々を派生枝の中に入れる方法があります \begin_inset Foot status collapsed \begin_layout Plain Layout 派生枝は,\SpecialChar LyX \emph on ユーザーの手引き \emph default の \emph on 派生枝 \emph default の節に説明されています. \end_layout \end_inset .派生枝を有効化したり無効化したりすることによって,取り込んだファイルのどれを出力に表示させるかを決めることができます.この方法は,入力で取り込んだ部分文書につ いても動作するという利点があります.ただし,カウンタと参照は,この方法では維持されるとは限りません. \end_layout \begin_layout Chapter プログラムコードリスト \begin_inset CommandInset label LatexCommand label name "cha:プログラムコードリスト" \end_inset \begin_inset Index idx status collapsed \begin_layout Plain Layout りすと@リスト \end_layout \end_inset \begin_inset Index idx status collapsed \begin_layout Plain Layout ぷろぐらむこーど@プログラムコード \end_layout \end_inset \begin_inset Index idx status collapsed \begin_layout Plain Layout ふろーと@フロート ! りすと@リスト \end_layout \end_inset \end_layout \begin_layout Standard プログラムコードを取り込んで組版するには, \family sans 挿入 \family default \SpecialChar menuseparator \family sans プログラムリスト \family default メニューを使用して挿入されるプログラムリスト差込枠を使用することができます.ここで使用される\SpecialChar LaTeX パッケージ \series bold listings \series default \begin_inset Index idx status collapsed \begin_layout Plain Layout \SpecialChar LaTeX ぱっけーじ@\SpecialChar LaTeX パッケージ ! listings \end_layout \end_inset は,使用中の文書にプログラムソースコードを挿入する強力で柔軟な方法を提供します. \end_layout \begin_layout Standard プログラムリスト差込枠を右クリックすると,コンテクストメニューが開き,リスト書式を設定することができます. \end_layout \begin_layout Standard 既定では,出力におけるプログラムリストは,新しい段落として始まります.配置オプションで \family sans 行内リスト \family default を指定すると,リストは \begin_inset listings lstparams "language={C++}" inline true status collapsed \begin_layout Plain Layout int a=5; \end_layout \end_inset のように行内に印字されます. \begin_inset Newline newline \end_inset \family sans フロート \family default オプションは,プログラムリストフロートを生成するものですが,ここで,第 \begin_inset CommandInset ref LatexCommand ref reference "sec:フロートの配置" \end_inset 節に説明されているフロート配置オプションに従って,「 \family sans h \family default 」「 \family sans t \family default 」「 \family sans b \family default 」「 \family sans p \family default 」の配置オプションを指定することができます.配置オプションは組み合わせて使用することができ,「 \family sans htbp \family default 」のように区切りを入れることなく入力することができます.「 \family sans h \family default 」オプションは効かない場合がありますが,フロートでないプログラムリストにもキャプションを入れることができ,また参照もできるので,この場合には \family sans フロート \family default オプションを使用しなければ大丈夫です. \end_layout \begin_layout Standard \family sans 挿入 \family default \SpecialChar menuseparator \family sans キャプション \family default メニューを使えば,プログラムリストにキャプションを付けることができます.プログラムリストは,フロート同様,リスト \begin_inset CommandInset ref LatexCommand ref reference "lst:ListFloat" \end_inset のように参照することができます.キャプションのついたプログラムリストの全一覧を, \family sans 挿入\SpecialChar menuseparator 一覧/目次\SpecialChar menuseparator プログラムリスト一覧 \family default で作成することができます.一覧の項目には,プログラムリストのキャプションとプログラムリスト番号が入ります. \end_layout \begin_layout Standard \begin_inset listings lstparams "language=Python" inline false status open \begin_layout Plain Layout \begin_inset Caption Standard \begin_layout Plain Layout \begin_inset CommandInset label LatexCommand label name "lst:ListFloat" \end_inset Example Listing Float \end_layout \end_inset # Example listing float \end_layout \begin_layout Plain Layout def func(param): \end_layout \begin_layout Plain Layout 'this is a python function' \end_layout \begin_layout Plain Layout pass \end_layout \end_inset \end_layout \begin_layout Standard プログラムリストダイアログでプログラミング言語を指定すると,その言語のキーワードが識別されて,出力中で特別に組版されます.上の例示プログラムリストでは,Pyth onのキーワード「def」が識別され,ボールド体で出力されます. \end_layout \begin_layout Standard \begin_inset Note Greyedout status open \begin_layout Plain Layout \series bold 【註】 \series default タイプライタフォントを使用している際にキーワードがボールド体にならない場合には,おそらくお使いの \family typewriter typewriter \family default フォントがボールド体を提供していません.この場合には, \family sans 文書 \family default \SpecialChar menuseparator \family sans 設定 \family default \SpecialChar menuseparator \family sans フォント \family default メニューで別のフォントを選択してください( \emph on LuxiMono \emph default ・ \emph on BeraMono \emph default ・ \emph on Courier \emph default の各フォントはボールド体を提供します). \end_layout \end_inset \end_layout \begin_layout Standard \begin_inset Note Greyedout status open \begin_layout Plain Layout \series bold 【訳註】 \series default プログラムリスト差込枠中では,日本語のエンコーディングを表示できないため,日本語は使用できません.プログラムリスト差込枠中のキャプションでも同様です. \end_layout \end_inset \end_layout \begin_layout Standard プログラムリストダイアログの \family sans 行番号 \family default のセクションでは,行番号の様式を指定することができます. \family sans 行間 \family default フィールドでは,どの行に番号を振るかを指定する数字を入れることができます.たとえば,「3」と入れると,3行ごとに数字が振られます. \end_layout \begin_layout Standard さらに行の範囲を指定することもでき,この場合にはこれらの行のみが出力に表示されます.プログラムリスト中でドイツ語のウムラウトのような国字を使用する場合には, \family sans 拡張文字コード表を使う \family default オプションを使用しなくてはなりません. \begin_inset Newline newline \end_inset \begin_inset Note Greyedout status open \begin_layout Plain Layout \series bold 【訳註】 \series default これは,p\SpecialChar LaTeX ではうまく動作しません. \end_layout \end_inset \begin_inset Newline newline \end_inset 以下は,左側の行番号・行間「3」・言語「Python」・「拡張文字コード表を使う」オプション・「空白を記号で表示」オプション・行範囲「3 \begin_inset space \thinspace{} \end_inset - \begin_inset space \thinspace{} \end_inset 8」で設定したプログラムリストの例です. \end_layout \begin_layout Standard \begin_inset listings lstparams "extendedchars=true,firstline=3,language=Python,lastline=8,numbers=left,showspaces=true,stepnumber=3" inline false status open \begin_layout Plain Layout def func(param): \end_layout \begin_layout Plain Layout 'this is a python function' \end_layout \begin_layout Plain Layout pass \end_layout \begin_layout Plain Layout def func(param): \end_layout \begin_layout Plain Layout 'This is a German word: Tschuss' \end_layout \begin_layout Plain Layout pass \end_layout \begin_layout Plain Layout def func(param): \end_layout \begin_layout Plain Layout 'this is a python function' \end_layout \begin_layout Plain Layout pass \end_layout \end_inset \end_layout \begin_layout Standard プログラムリスト中でタビュレータを使う場合は,タビュレータが確保する文字の数を \family sans タビュレータの大きさ \family default フィールドで指定することができます. \end_layout \begin_layout Standard \begin_inset Note Greyedout status open \begin_layout Plain Layout \series bold 【註】listings \series default パッケージにはバグがあり,前にプログラムリストがある毎に,行番号が一行ずつずれます.上記プログラムリストで3行目と6行目に番号が振られる代わりに,2行目と5行目 に振られているのはこのためです. \end_layout \end_inset \end_layout \begin_layout Standard \begin_inset VSpace bigskip \end_inset \end_layout \begin_layout Standard また,ファイルの各行をプログラムリストとして印字することも可能です.そのためには, \family sans 挿入 \family default \SpecialChar menuseparator \family sans ファイル \family default \SpecialChar menuseparator \family sans 子文書 \family default メニューを使用して \family sans プログラムリスト \family default 型を選択してください \begin_inset Foot status collapsed \begin_layout Plain Layout 他の子文書型については,第 section \begin_inset space ~ \end_inset \begin_inset CommandInset ref LatexCommand ref reference "sec:子文書" \end_inset 節に説明があります. \end_layout \end_inset .子文書ダイアログでは,テキストボックスにプログラムリストのパラメータを指定することができます.使用できる全パラメータの一覧を見たい場合は,テキストボックス中で 疑問符「?」を打鍵してください. \end_layout \begin_layout Standard 子文書プログラムリストを参照したい場合には,子文書ダイアログの対応するフィールドにラベル文を書き込んでください.すると,このラベルは \family sans 挿入 \family default \SpecialChar menuseparator \family sans 相互参照 \family default メニューを使って参照できるようになります. \end_layout \begin_layout Standard プログラムリスト \begin_inset CommandInset ref LatexCommand ref reference "lst:file-listing" \end_inset は,ファイルを使ったプログラムリストの一例です.ここでは,この\SpecialChar LyX ファイルの10行目から15行目が表示されています. \end_layout \begin_layout Standard \begin_inset CommandInset include LatexCommand lstinputlisting filename "EmbeddedObjects.lyx" lstparams "breaklines=true,caption={Lines 10 - 15 of this LyX file},extendedchars=true,firstline=10,label={lst:file-listing},language={[LaTeX]TeX},lastline=15" \end_inset \end_layout \begin_layout Standard \begin_inset VSpace bigskip \end_inset \end_layout \begin_layout Standard リストに数式を入れるには,以下のようにします. \end_layout \begin_layout Enumerate リストダイアログを開き, \family sans 詳細 \family default タブのフィールド中に \begin_inset Newline newline \end_inset \family sans mathescape=true \family default \begin_inset Newline newline \end_inset と書き加えます. \end_layout \begin_layout Enumerate リスト外で数式を作成します. \end_layout \begin_layout Enumerate 数式の内容(数式差込枠ではなく)をクリップボードにコピーします(短縮キー \begin_inset Info type "shortcut" arg "copy" \end_inset ). \end_layout \begin_layout Enumerate リストに「$$」と書き,クリップボードの内容をドルマークの間に貼り付けます(短縮キー \begin_inset Info type "shortcut" arg "paste" \end_inset ). \end_layout \begin_layout Standard \begin_inset listings lstparams "language=Python,mathescape=true" inline false status open \begin_layout Plain Layout \begin_inset Caption Standard \begin_layout Plain Layout Example Listing float containing a formula \end_layout \end_inset # Example listing float \end_layout \begin_layout Plain Layout def func(param): \end_layout \begin_layout Plain Layout # $ \backslash prod_{n=1}^{ \backslash infty} \backslash , \backslash frac{1}{x^{2}}$ \end_layout \begin_layout Plain Layout pass \end_layout \end_inset \end_layout \begin_layout Standard \begin_inset VSpace bigskip \end_inset \end_layout \begin_layout Standard 大域的なプログラムリストの設定は, \family sans 文書 \family default \SpecialChar menuseparator \family sans 設定 \family default \SpecialChar menuseparator \family sans リスト \family default ダイアログで設定することができます.ここで利用できるオプションの一覧を得るには, \family sans プログラムリスト設定 \family default フィールドで疑問符「?」を打鍵してください. \end_layout \begin_layout Standard \series bold listings \series default パッケージについての詳しい情報については,取扱説明書 \begin_inset CommandInset citation LatexCommand cite key "listings" literal "true" \end_inset をご参照ください. \end_layout \begin_layout Standard \begin_inset Newpage newpage \end_inset \end_layout \begin_layout Chapter \start_of_appendix \SpecialChar LyX で使用できる単位 \begin_inset Index idx status collapsed \begin_layout Plain Layout たんい@単位 \end_layout \end_inset \begin_inset CommandInset label LatexCommand label name "cha:LyXで使用できる単位" \end_inset \end_layout \begin_layout Standard この文書で用いられる単位の理解のために,表 \begin_inset CommandInset ref LatexCommand ref reference "tab:単位" \end_inset に,\SpecialChar LyX で使うことのできる単位をまとめておきます. \end_layout \begin_layout Standard \begin_inset Float table placement h wide false sideways false status open \begin_layout Plain Layout \begin_inset Caption Standard \begin_layout Plain Layout \begin_inset CommandInset label LatexCommand label name "tab:単位" \end_inset 単位 \end_layout \end_inset \end_layout \begin_layout Plain Layout \begin_inset VSpace medskip \end_inset \end_layout \begin_layout Plain Layout \align center \begin_inset Tabular <lyxtabular version="3" rows="20" columns="3"> <features tabularvalignment="middle"> <column alignment="center" valignment="top"> <column alignment="center" valignment="top"> <column alignment="center" valignment="top"> <row> <cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 単位 \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 名称/摘要 \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \SpecialChar LaTeX コマンド \end_layout \end_inset </cell> </row> <row> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout mm \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout ミリメートル \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout - \end_layout \end_inset </cell> </row> <row> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout cm \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout センチメートル \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout - \end_layout \end_inset </cell> </row> <row> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout in \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout インチ \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout - \end_layout \end_inset </cell> </row> <row> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout pt \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout ポイント (72.27 \begin_inset space \thinspace{} \end_inset pt = 1 \begin_inset space \thinspace{} \end_inset in) \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout - \end_layout \end_inset </cell> </row> <row> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout pc \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout パイカ (1 \begin_inset space \thinspace{} \end_inset pc = 12 \begin_inset space \thinspace{} \end_inset pt) \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout - \end_layout \end_inset </cell> </row> <row> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout sp \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout スケールポイント (65536 \begin_inset space \thinspace{} \end_inset sp = 1 \begin_inset space \thinspace{} \end_inset pt) \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout - \end_layout \end_inset </cell> </row> <row> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout bp \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout ビッグポイント (72 \begin_inset space \thinspace{} \end_inset bp = 1 \begin_inset space \thinspace{} \end_inset in) \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout - \end_layout \end_inset </cell> </row> <row> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout dd \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout ディドー (72 \begin_inset space \thinspace{} \end_inset dd \begin_inset Formula $\approx$ \end_inset 37.6 \begin_inset space \thinspace{} \end_inset mm) \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout - \end_layout \end_inset </cell> </row> <row> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout cc \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout シセロ (1 \begin_inset space \thinspace{} \end_inset cc = 12 \begin_inset space \thinspace{} \end_inset dd) \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout - \end_layout \end_inset </cell> </row> <row> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 画像の縮尺% \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 元の画像幅の% \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \end_layout \end_inset </cell> </row> <row> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 本文幅% \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout テキスト幅の% \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \backslash textwidth \end_layout \end_inset </cell> </row> <row> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 列幅% \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 組段幅の% \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \backslash columnwidth \end_layout \end_inset </cell> </row> <row> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout ページ幅% \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 用紙幅の% \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \backslash paperwidth \end_layout \end_inset </cell> </row> <row> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 行幅% \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 行幅の% \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \backslash linewidth \end_layout \end_inset </cell> </row> <row> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 本文高% \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout テキスト高さの% \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \backslash textheight \end_layout \end_inset </cell> </row> <row> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout ページ高% \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 用紙高さの% \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout \backslash paperheight \end_layout \end_inset </cell> </row> <row> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout ex \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 現在のフォントの文字「x」の高さ \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout - \end_layout \end_inset </cell> </row> <row> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout em \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 現在のフォントの文字「M」の幅 \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout - \end_layout \end_inset </cell> </row> <row> <cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout mu \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout 数式単位 (1 \begin_inset space \thinspace{} \end_inset mu = 1/18 \begin_inset space \thinspace{} \end_inset em) \end_layout \end_inset </cell> <cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" rightline="true" usebox="none"> \begin_inset Text \begin_layout Plain Layout - \end_layout \end_inset </cell> </row> </lyxtabular> \end_inset \end_layout \end_inset \end_layout \begin_layout Chapter 画像を含む場合のファイル出力形式 \begin_inset CommandInset label LatexCommand label name "cha:ファイル出力形式" \end_inset \end_layout \begin_layout Section DVI \begin_inset Index idx status collapsed \begin_layout Plain Layout ふぁいるしょしき@ファイル書式 ! DVI \end_layout \end_inset \begin_inset Index idx status collapsed \begin_layout Plain Layout DVI \begin_inset ERT status collapsed \begin_layout Plain Layout |see{ \end_layout \end_inset ファイル書式 \begin_inset ERT status collapsed \begin_layout Plain Layout } \end_layout \end_inset \end_layout \end_inset \end_layout \begin_layout Standard このファイル型の拡張子は「 \family typewriter .dvi \family default 」です.このファイル型は完全に可搬性があるので「device-independent(DVI:デバイス独立型)」の名称がついています.これはあるコンピュータから 別のコンピュータへ,何らの変換も行うことなしに移動することができます.このファイル書式が開発された当時には,これは当然のことでは全くありませんでした.DVIは手 っ取り早くプレビューしたり,PostScriptなどの他の出力形式への中間段階として使用されます. \end_layout \begin_layout Standard \begin_inset Note Greyedout status open \begin_layout Plain Layout \series bold 【註】 \series default DVIファイルには画像は含まれていません.画像はリンクされているだけです. \end_layout \end_inset ですから,お使いの \family typewriter .dvi \family default ファイルを別のコンピュータに移すときには,このことを忘れてはいけません.この性質は,DVIを閲覧する際にお使いのコンピュータを遅くしてしまうことがあります.DV Iビューアは,DVIをスクロールする際,画像を表示できるようにバックグラウンドで変換しなくてはならないためです.ですから,画像のたくさんあるファイルの場合は,P DFを使用することをお勧めします. \end_layout \begin_layout Standard 使用中の文書は, \family sans ファイル \family default \SpecialChar menuseparator \family sans 書き出し \family default \SpecialChar menuseparator \family sans DVI \family default メニューを使用して,DVIに書き出すことができます. \family sans 表示 \family default メニューから,文書をDVIとして表示させることもできます. \end_layout \begin_layout Section PostScript \begin_inset Index idx status collapsed \begin_layout Plain Layout ふぁいるしょしき@ファイル書式 ! PostScript \end_layout \end_inset \begin_inset Index idx status collapsed \begin_layout Plain Layout PostScript \begin_inset ERT status collapsed \begin_layout Plain Layout |see{ \end_layout \end_inset ファイル書式 \begin_inset ERT status collapsed \begin_layout Plain Layout } \end_layout \end_inset \end_layout \end_inset \end_layout \begin_layout Standard このファイル型の拡張子は「 \family typewriter .ps \family default 」です.PostScriptは, \family typewriter Adobe \family default 社によってプリンタ言語として開発されました.したがって,このファイルにはプリンタがファイルを印字するコマンドが書かれています.PostScripは,計算を行った り図表や画像を描いたりすることもできるので,「プログラミング言語」と見なすことができます \begin_inset Foot status collapsed \begin_layout Plain Layout これについてもう少し学ぶ気があれば,\SpecialChar LaTeX パッケージ \series bold PSTricks \series default \begin_inset CommandInset citation LatexCommand cite key "pstricks" literal "true" \end_inset を見てみてください. \end_layout \end_inset .この機能のためにPostScriptはPDFよりも大きくなりがちです. \end_layout \begin_layout Standard PostScriptは,「Encapsulated PostScript(EPS:ファイル拡張子「 \family typewriter .eps \family default 」)」形式の画像のみを含めることができます.\SpecialChar LyX では,既知の画像形式であればどれでも文書中で使用することができるようになっているため,\SpecialChar LyX はバックグラウンドで画像をEP Sに変換しなくてはなりません.文書中に,仮に50の画像があれば,文書を表示したり書き出ししたりするたびに,\SpecialChar LyX は50もの変換を行わなくてはなりません.すると,\SpecialChar LyX で行う 作業手順が,著しく遅れてしまいます.したがって,もしPostScriptを使用することを考えているならば,この問題を回避するために,画像を直接EPSとして入れて おく方がよいでしょう. \end_layout \begin_layout Standard 文書は, \family sans ファイル \family default \SpecialChar menuseparator \family sans 書き出し \family default \SpecialChar menuseparator \family sans Postscript \family default メニューを使用して,PostScriptに書き出すことができます.使用中の文書は, \family sans 表示 \family default メニューかツールバーボタンを使用することでPostScriptとして表示させることができます. \end_layout \begin_layout Section PDF \begin_inset Index idx status collapsed \begin_layout Plain Layout ふぁいるしょしき@ファイル書式 ! PDF \end_layout \end_inset \begin_inset Index idx status collapsed \begin_layout Plain Layout PDF \end_layout \end_inset \end_layout \begin_layout Standard このファイル型の拡張子は「 \family typewriter .pdf \family default 」です.この「Portable Document Format (PDF)」は, \family typewriter Adobe \family default 社によってPostScriptの派生として開発されました.PDFは,PostScriptよりも圧縮されており,かなり少ないコマンドしか使いません.「portab le(可搬的)」の名称が示すとおり,この形式は,どのコンピュータシステムでも処理することができ,印字出力は全く同じように出すことができます. \end_layout \begin_layout Standard PDFは画像を,同じPDF形式か,「Joint Photographic Experts Group(JPG:ファイル拡張子「 \family typewriter .jpg \family default 」または「 \family typewriter .jpeg \family default 」)」形式か,「Portable Network Graphics(PNG:ファイル拡張子「 \family typewriter .png \family default 」)」として含めることができます.それにもかかわらず,\SpecialChar LyX は画像をこれらの形式のいずれかにバックグラウンドで変換を行うので,他の画像形式も自由に使用することができま す.しかし,PostScriptの節で説明したように,この画像変換は作業手順を遅らせます.したがって,上記で述べた3つの画像形式のうちいずれかを使用することをお 勧めします. \end_layout \begin_layout Standard 使用中の文書は, \family sans ファイル \family default \SpecialChar menuseparator \family sans 書き出し \family default メニューを使用して,以下の3つの方法のうちいずれかでPDFに書き出すことができます. \end_layout \begin_layout Description PDF \begin_inset space ~ \end_inset (ps2pdf) これは \family typewriter ps2pdf \family default プログラムを使って,現在のファイルのPostScript版からPDFを生成します.このPostScript版は,中間段階にDVI版を使用する \family typewriter dvips \family default プログラムによって生成されます.つまり,この書き出し方法は,3段階の変換を伴います. \end_layout \begin_layout Description PDF \begin_inset space ~ \end_inset (dvipdfm) これは \family typewriter dvipdfm \family default プログラムを使って,現在のファイルをバックグラウンドでDVIに変換し,2段階目でPDFに変換します. \end_layout \begin_layout Description PDF \begin_inset space ~ \end_inset (pdflatex) これは \family typewriter pdftex \family default プログラムを使って,現在のファイルを直接PDFに変換します. \end_layout \begin_layout Standard \family typewriter pdftex \family default は現在のPDF版のすべての機能をサポートし,高速で問題なく安定して動作するので, \family sans PDF \begin_inset space ~ \end_inset (pdflatex) \family default を使用することが推奨されます. \family typewriter dvipdfm \family default プログラムは開発が停止しており,若干時代遅れになっています. \end_layout \begin_layout Standard 使用中の文書をPDFとして表示するには, \family sans 表示 \family default メニューかツールバーボタン(これは \family sans PDF \begin_inset space ~ \end_inset (pdflatex) \family default を使用します)を用います. \end_layout \begin_layout Chapter dvips色名一覧 \begin_inset CommandInset label LatexCommand label name "chap:dvips色名一覧" \end_inset \end_layout \begin_layout Standard \begin_inset Tabular <lyxtabular version="3" rows="17" columns="4"> <features tabularvalignment="middle"> <column alignment="left" valignment="top" width="0pt"> <column alignment="left" valignment="top" width="0pt"> <column alignment="left" valignment="top" width="0pt"> <column alignment="left" valignment="top" width="0pt"> <row> <cell alignment="left" valignment="top" usebox="none"> \begin_inset Text \begin_layout Plain Layout \begin_inset ERT status collapsed \begin_layout Plain Layout \backslash fcolorbox{black}{ \end_layout \end_inset white \begin_inset ERT status collapsed \begin_layout Plain Layout }{ \end_layout \end_inset 色 \begin_inset ERT status collapsed \begin_layout Plain Layout } \end_layout \end_inset 色名 \end_layout \end_inset </cell> <cell alignment="left" valignment="top" usebox="none"> \begin_inset Text \begin_layout Plain Layout \begin_inset ERT status collapsed \begin_layout Plain Layout \backslash fcolorbox{black}{ \end_layout \end_inset white \begin_inset ERT status collapsed \begin_layout Plain Layout }{ \end_layout \end_inset 色 \begin_inset ERT status collapsed \begin_layout Plain Layout } \end_layout \end_inset 色名 \end_layout \end_inset </cell> <cell alignment="left" valignment="top" usebox="none"> \begin_inset Text \begin_layout Plain Layout \begin_inset ERT status collapsed \begin_layout Plain Layout \backslash fcolorbox{black}{ \end_layout \end_inset white \begin_inset ERT status collapsed \begin_layout Plain Layout }{ \end_layout \end_inset 色 \begin_inset ERT status collapsed \begin_layout Plain Layout } \end_layout \end_inset 色名 \end_layout \end_inset </cell> <cell alignment="left" valignment="top" usebox="none"> \begin_inset Text \begin_layout Plain Layout \begin_inset ERT status collapsed \begin_layout Plain Layout \backslash fcolorbox{black}{ \end_layout \end_inset white \begin_inset ERT status collapsed \begin_layout Plain Layout }{ \end_layout \end_inset 色 \begin_inset ERT status collapsed \begin_layout Plain Layout } \end_layout \end_inset 色名 \end_layout \end_inset </cell> </row> <row> <cell alignment="center" valignment="top" usebox="none"> \begin_inset Text \begin_layout Plain Layout \begin_inset ERT status collapsed \begin_layout Plain Layout \backslash fcolorbox{black}{ \end_layout \end_inset Apricot \begin_inset ERT status collapsed \begin_layout Plain Layout }{ \end_layout \end_inset \begin_inset Phantom Phantom status open \begin_layout Plain Layout W \end_layout \end_inset \begin_inset ERT status collapsed \begin_layout Plain Layout } \end_layout \end_inset Apricot \end_layout \end_inset </cell> <cell alignment="center" valignment="top" usebox="none"> \begin_inset Text \begin_layout Plain Layout \begin_inset ERT status collapsed \begin_layout Plain Layout \backslash fcolorbox{black}{ \end_layout \end_inset Aquamarine \begin_inset ERT status collapsed \begin_layout Plain Layout }{ \end_layout \end_inset \begin_inset Phantom Phantom status open \begin_layout Plain Layout W \end_layout \end_inset \begin_inset ERT status collapsed \begin_layout Plain Layout } \end_layout \end_inset Aquamarine \end_layout \end_inset </cell> <cell alignment="center" valignment="top" usebox="none"> \begin_inset Text \begin_layout Plain Layout \begin_inset ERT status collapsed \begin_layout Plain Layout \backslash fcolorbox{black}{ \end_layout \end_inset Bittersweet \begin_inset ERT status collapsed \begin_layout Plain Layout }{ \end_layout \end_inset \begin_inset Phantom Phantom status open \begin_layout Plain Layout W \end_layout \end_inset \begin_inset ERT status collapsed \begin_layout Plain Layout } \end_layout \end_inset Bittersweet \end_layout \end_inset </cell> <cell alignment="center" valignment="top" usebox="none"> \begin_inset Text \begin_layout Plain Layout \begin_inset ERT status collapsed \begin_layout Plain Layout \backslash fcolorbox{black}{ \end_layout \end_inset BlueGreen \begin_inset ERT status collapsed \begin_layout Plain Layout }{ \end_layout \end_inset \begin_inset Phantom Phantom status open \begin_layout Plain Layout W \end_layout \end_inset \begin_inset ERT status collapsed \begin_layout Plain Layout } \end_layout \end_inset BlueGreen \end_layout \end_inset </cell> </row> <row> <cell alignment="left" valignment="top" usebox="none"> \begin_inset Text \begin_layout Plain Layout \begin_inset ERT status collapsed \begin_layout Plain Layout \backslash fcolorbox{black}{ \end_layout \end_inset BlueViolet \begin_inset ERT status collapsed \begin_layout Plain Layout }{ \end_layout \end_inset \begin_inset Phantom Phantom status open \begin_layout Plain Layout W \end_layout \end_inset \begin_inset ERT status collapsed \begin_layout Plain Layout } \end_layout \end_inset BlueViolet \end_layout \end_inset </cell> <cell alignment="left" valignment="top" usebox="none"> \begin_inset Text \begin_layout Plain Layout \begin_inset ERT status collapsed \begin_layout Plain Layout \backslash fcolorbox{black}{ \end_layout \end_inset BrickRed \begin_inset ERT status collapsed \begin_layout Plain Layout }{ \end_layout \end_inset \begin_inset Phantom Phantom status open \begin_layout Plain Layout W \end_layout \end_inset \begin_inset ERT status collapsed \begin_layout Plain Layout } \end_layout \end_inset BrickRed \end_layout \end_inset </cell> <cell alignment="left" valignment="top" usebox="none"> \begin_inset Text \begin_layout Plain Layout \begin_inset ERT status collapsed \begin_layout Plain Layout \backslash fcolorbox{black}{ \end_layout \end_inset Brown \begin_inset ERT status collapsed \begin_layout Plain Layout }{ \end_layout \end_inset \begin_inset Phantom Phantom status open \begin_layout Plain Layout W \end_layout \end_inset \begin_inset ERT status collapsed \begin_layout Plain Layout } \end_layout \end_inset Brown \end_layout \end_inset </cell> <cell alignment="left" valignment="top" usebox="none"> \begin_inset Text \begin_layout Plain Layout \begin_inset ERT status collapsed \begin_layout Plain Layout \backslash fcolorbox{black}{ \end_layout \end_inset BurntOrange \begin_inset ERT status collapsed \begin_layout Plain Layout }{ \end_layout \end_inset \begin_inset Phantom Phantom status open \begin_layout Plain Layout W \end_layout \end_inset \begin_inset ERT status collapsed \begin_layout Plain Layout } \end_layout \end_inset BurntOrange \end_layout \end_inset </cell> </row> <row> <cell alignment="left" valignment="top" usebox="none"> \begin_inset Text \begin_layout Plain Layout \begin_inset ERT status collapsed \begin_layout Plain Layout \backslash fcolorbox{black}{ \end_layout \end_inset CadetBlue \begin_inset ERT status collapsed \begin_layout Plain Layout }{ \end_layout \end_inset \begin_inset Phantom Phantom status open \begin_layout Plain Layout W \end_layout \end_inset \begin_inset ERT status collapsed \begin_layout Plain Layout } \end_layout \end_inset CadetBlue \end_layout \end_inset </cell> <cell alignment="left" valignment="top" usebox="none"> \begin_inset Text \begin_layout Plain Layout \begin_inset ERT status collapsed \begin_layout Plain Layout \backslash fcolorbox{black}{ \end_layout \end_inset CarnationPink \begin_inset ERT status collapsed \begin_layout Plain Layout }{ \end_layout \end_inset \begin_inset Phantom Phantom status open \begin_layout Plain Layout W \end_layout \end_inset \begin_inset ERT status collapsed \begin_layout Plain Layout } \end_layout \end_inset CarnationPink \end_layout \end_inset </cell> <cell alignment="left" valignment="top" usebox="none"> \begin_inset Text \begin_layout Plain Layout \begin_inset ERT status collapsed \begin_layout Plain Layout \backslash fcolorbox{black}{ \end_layout \end_inset Cerulean \begin_inset ERT status collapsed \begin_layout Plain Layout }{ \end_layout \end_inset \begin_inset Phantom Phantom status open \begin_layout Plain Layout W \end_layout \end_inset \begin_inset ERT status collapsed \begin_layout Plain Layout } \end_layout \end_inset Cerulean \end_layout \end_inset </cell> <cell alignment="left" valignment="top" usebox="none"> \begin_inset Text \begin_layout Plain Layout \begin_inset ERT status collapsed \begin_layout Plain Layout \backslash fcolorbox{black}{ \end_layout \end_inset CornflowerBlue \begin_inset ERT status collapsed \begin_layout Plain Layout }{ \end_layout \end_inset \begin_inset Phantom Phantom status open \begin_layout Plain Layout W \end_layout \end_inset \begin_inset ERT status collapsed \begin_layout Plain Layout } \end_layout \end_inset CornflowerBlue \end_layout \end_inset </cell> </row> <row> <cell alignment="left" valignment="top" usebox="none"> \begin_inset Text \begin_layout Plain Layout \begin_inset ERT status collapsed \begin_layout Plain Layout \backslash fcolorbox{black}{ \end_layout \end_inset Dandelion \begin_inset ERT status collapsed \begin_layout Plain Layout }{ \end_layout \end_inset \begin_inset Phantom Phantom status open \begin_layout Plain Layout W \end_layout \end_inset \begin_inset ERT status collapsed \begin_layout Plain Layout } \end_layout \end_inset Dandelion \end_layout \end_inset </cell> <cell alignment="left" valignment="top" usebox="none"> \begin_inset Text \begin_layout Plain Layout \begin_inset ERT status collapsed \begin_layout Plain Layout \backslash fcolorbox{black}{ \end_layout \end_inset DarkOrchid \begin_inset ERT status collapsed \begin_layout Plain Layout }{ \end_layout \end_inset \begin_inset Phantom Phantom status open \begin_layout Plain Layout W \end_layout \end_inset \begin_inset ERT status collapsed \begin_layout Plain Layout } \end_layout \end_inset DarkOrchid \end_layout \end_inset </cell> <cell alignment="left" valignment="top" usebox="none"> \begin_inset Text \begin_layout Plain Layout \begin_inset ERT status collapsed \begin_layout Plain Layout \backslash fcolorbox{black}{ \end_layout \end_inset Emerald \begin_inset ERT status collapsed \begin_layout Plain Layout }{ \end_layout \end_inset \begin_inset Phantom Phantom status open \begin_layout Plain Layout W \end_layout \end_inset \begin_inset ERT status collapsed \begin_layout Plain Layout } \end_layout \end_inset Emerald \end_layout \end_inset </cell> <cell alignment="left" valignment="top" usebox="none"> \begin_inset Text \begin_layout Plain Layout \begin_inset ERT status collapsed \begin_layout Plain Layout \backslash fcolorbox{black}{ \end_layout \end_inset ForestGreen \begin_inset ERT status collapsed \begin_layout Plain Layout }{ \end_layout \end_inset \begin_inset Phantom Phantom status open \begin_layout Plain Layout W \end_layout \end_inset \begin_inset ERT status collapsed \begin_layout Plain Layout } \end_layout \end_inset ForestGreen \end_layout \end_inset </cell> </row> <row> <cell alignment="left" valignment="top" usebox="none"> \begin_inset Text \begin_layout Plain Layout \begin_inset ERT status collapsed \begin_layout Plain Layout \backslash fcolorbox{black}{ \end_layout \end_inset Fuchsia \begin_inset ERT status collapsed \begin_layout Plain Layout }{ \end_layout \end_inset \begin_inset Phantom Phantom status open \begin_layout Plain Layout W \end_layout \end_inset \begin_inset ERT status collapsed \begin_layout Plain Layout } \end_layout \end_inset Fuchsia \end_layout \end_inset </cell> <cell alignment="left" valignment="top" usebox="none"> \begin_inset Text \begin_layout Plain Layout \begin_inset ERT status collapsed \begin_layout Plain Layout \backslash fcolorbox{black}{ \end_layout \end_inset Goldenrod \begin_inset ERT status collapsed \begin_layout Plain Layout }{ \end_layout \end_inset \begin_inset Phantom Phantom status open \begin_layout Plain Layout W \end_layout \end_inset \begin_inset ERT status collapsed \begin_layout Plain Layout } \end_layout \end_inset Goldenrod \end_layout \end_inset </cell> <cell alignment="left" valignment="top" usebox="none"> \begin_inset Text \begin_layout Plain Layout \begin_inset ERT status collapsed \begin_layout Plain Layout \backslash fcolorbox{black}{ \end_layout \end_inset Gray \begin_inset ERT status collapsed \begin_layout Plain Layout }{ \end_layout \end_inset \begin_inset Phantom Phantom status open \begin_layout Plain Layout W \end_layout \end_inset \begin_inset ERT status collapsed \begin_layout Plain Layout } \end_layout \end_inset Gray \end_layout \end_inset </cell> <cell alignment="left" valignment="top" usebox="none"> \begin_inset Text \begin_layout Plain Layout \begin_inset ERT status collapsed \begin_layout Plain Layout \backslash fcolorbox{black}{ \end_layout \end_inset GreenYellow \begin_inset ERT status collapsed \begin_layout Plain Layout }{ \end_layout \end_inset \begin_inset Phantom Phantom status open \begin_layout Plain Layout W \end_layout \end_inset \begin_inset ERT status collapsed \begin_layout Plain Layout } \end_layout \end_inset GreenYellow \end_layout \end_inset </cell> </row> <row> <cell alignment="center" valignment="top" usebox="none"> \begin_inset Text \begin_layout Plain Layout \begin_inset ERT status collapsed \begin_layout Plain Layout \backslash fcolorbox{black}{ \end_layout \end_inset JungleGreen \begin_inset ERT status collapsed \begin_layout Plain Layout }{ \end_layout \end_inset \begin_inset Phantom Phantom status open \begin_layout Plain Layout W \end_layout \end_inset \begin_inset ERT status collapsed \begin_layout Plain Layout } \end_layout \end_inset JungleGreen \end_layout \end_inset </cell> <cell alignment="center" valignment="top" usebox="none"> \begin_inset Text \begin_layout Plain Layout \begin_inset ERT status collapsed \begin_layout Plain Layout \backslash fcolorbox{black}{ \end_layout \end_inset Lavender \begin_inset ERT status collapsed \begin_layout Plain Layout }{ \end_layout \end_inset \begin_inset Phantom Phantom status open \begin_layout Plain Layout W \end_layout \end_inset \begin_inset ERT status collapsed \begin_layout Plain Layout } \end_layout \end_inset Lavender \end_layout \end_inset </cell> <cell alignment="center" valignment="top" usebox="none"> \begin_inset Text \begin_layout Plain Layout \begin_inset ERT status collapsed \begin_layout Plain Layout \backslash fcolorbox{black}{ \end_layout \end_inset LimeGreen \begin_inset ERT status collapsed \begin_layout Plain Layout }{ \end_layout \end_inset \begin_inset Phantom Phantom status open \begin_layout Plain Layout W \end_layout \end_inset \begin_inset ERT status collapsed \begin_layout Plain Layout } \end_layout \end_inset LimeGreen \end_layout \end_inset </cell> <cell alignment="center" valignment="top" usebox="none"> \begin_inset Text \begin_layout Plain Layout \begin_inset ERT status collapsed \begin_layout Plain Layout \backslash fcolorbox{black}{ \end_layout \end_inset Mahogany \begin_inset ERT status collapsed \begin_layout Plain Layout }{ \end_layout \end_inset \begin_inset Phantom Phantom status open \begin_layout Plain Layout W \end_layout \end_inset \begin_inset ERT status collapsed \begin_layout Plain Layout } \end_layout \end_inset Mahogany \end_layout \end_inset </cell> </row> <row> <cell alignment="left" valignment="top" usebox="none"> \begin_inset Text \begin_layout Plain Layout \begin_inset ERT status collapsed \begin_layout Plain Layout \backslash fcolorbox{black}{ \end_layout \end_inset Mahogany \begin_inset ERT status collapsed \begin_layout Plain Layout }{ \end_layout \end_inset \begin_inset Phantom Phantom status open \begin_layout Plain Layout W \end_layout \end_inset \begin_inset ERT status collapsed \begin_layout Plain Layout } \end_layout \end_inset Mahogany \end_layout \end_inset </cell> <cell alignment="left" valignment="top" usebox="none"> \begin_inset Text \begin_layout Plain Layout \begin_inset ERT status collapsed \begin_layout Plain Layout \backslash fcolorbox{black}{ \end_layout \end_inset Maroon \begin_inset ERT status collapsed \begin_layout Plain Layout }{ \end_layout \end_inset \begin_inset Phantom Phantom status open \begin_layout Plain Layout W \end_layout \end_inset \begin_inset ERT status collapsed \begin_layout Plain Layout } \end_layout \end_inset Maroon \end_layout \end_inset </cell> <cell alignment="left" valignment="top" usebox="none"> \begin_inset Text \begin_layout Plain Layout \begin_inset ERT status collapsed \begin_layout Plain Layout \backslash fcolorbox{black}{ \end_layout \end_inset Melon \begin_inset ERT status collapsed \begin_layout Plain Layout }{ \end_layout \end_inset \begin_inset Phantom Phantom status open \begin_layout Plain Layout W \end_layout \end_inset \begin_inset ERT status collapsed \begin_layout Plain Layout } \end_layout \end_inset Melon \end_layout \end_inset </cell> <cell alignment="left" valignment="top" usebox="none"> \begin_inset Text \begin_layout Plain Layout \begin_inset ERT status collapsed \begin_layout Plain Layout \backslash fcolorbox{black}{ \end_layout \end_inset MidnightBlue \begin_inset ERT status collapsed \begin_layout Plain Layout }{ \end_layout \end_inset \begin_inset Phantom Phantom status open \begin_layout Plain Layout W \end_layout \end_inset \begin_inset ERT status collapsed \begin_layout Plain Layout } \end_layout \end_inset MidnightBlue \end_layout \end_inset </cell> </row> <row> <cell alignment="left" valignment="top" usebox="none"> \begin_inset Text \begin_layout Plain Layout \begin_inset ERT status collapsed \begin_layout Plain Layout \backslash fcolorbox{black}{ \end_layout \end_inset Mulberry \begin_inset ERT status collapsed \begin_layout Plain Layout }{ \end_layout \end_inset \begin_inset Phantom Phantom status open \begin_layout Plain Layout W \end_layout \end_inset \begin_inset ERT status collapsed \begin_layout Plain Layout } \end_layout \end_inset Mulberry \end_layout \end_inset </cell> <cell alignment="left" valignment="top" usebox="none"> \begin_inset Text \begin_layout Plain Layout \begin_inset ERT status collapsed \begin_layout Plain Layout \backslash fcolorbox{black}{ \end_layout \end_inset NavyBlue \begin_inset ERT status collapsed \begin_layout Plain Layout }{ \end_layout \end_inset \begin_inset Phantom Phantom status open \begin_layout Plain Layout W \end_layout \end_inset \begin_inset ERT status collapsed \begin_layout Plain Layout } \end_layout \end_inset NavyBlue \end_layout \end_inset </cell> <cell alignment="left" valignment="top" usebox="none"> \begin_inset Text \begin_layout Plain Layout \begin_inset ERT status collapsed \begin_layout Plain Layout \backslash fcolorbox{black}{ \end_layout \end_inset OliveGreen \begin_inset ERT status collapsed \begin_layout Plain Layout }{ \end_layout \end_inset \begin_inset Phantom Phantom status open \begin_layout Plain Layout W \end_layout \end_inset \begin_inset ERT status collapsed \begin_layout Plain Layout } \end_layout \end_inset OliveGreen \end_layout \end_inset </cell> <cell alignment="left" valignment="top" usebox="none"> \begin_inset Text \begin_layout Plain Layout \begin_inset ERT status collapsed \begin_layout Plain Layout \backslash fcolorbox{black}{ \end_layout \end_inset Orange \begin_inset ERT status collapsed \begin_layout Plain Layout }{ \end_layout \end_inset \begin_inset Phantom Phantom status open \begin_layout Plain Layout W \end_layout \end_inset \begin_inset ERT status collapsed \begin_layout Plain Layout } \end_layout \end_inset Orange \end_layout \end_inset </cell> </row> <row> <cell alignment="left" valignment="top" usebox="none"> \begin_inset Text \begin_layout Plain Layout \begin_inset ERT status collapsed \begin_layout Plain Layout \backslash fcolorbox{black}{ \end_layout \end_inset OrangeRed \begin_inset ERT status collapsed \begin_layout Plain Layout }{ \end_layout \end_inset \begin_inset Phantom Phantom status open \begin_layout Plain Layout W \end_layout \end_inset \begin_inset ERT status collapsed \begin_layout Plain Layout } \end_layout \end_inset OrangeRed \end_layout \end_inset </cell> <cell alignment="left" valignment="top" usebox="none"> \begin_inset Text \begin_layout Plain Layout \begin_inset ERT status collapsed \begin_layout Plain Layout \backslash fcolorbox{black}{ \end_layout \end_inset Orchid \begin_inset ERT status collapsed \begin_layout Plain Layout }{ \end_layout \end_inset \begin_inset Phantom Phantom status open \begin_layout Plain Layout W \end_layout \end_inset \begin_inset ERT status collapsed \begin_layout Plain Layout } \end_layout \end_inset Orchid \end_layout \end_inset </cell> <cell alignment="left" valignment="top" usebox="none"> \begin_inset Text \begin_layout Plain Layout \begin_inset ERT status collapsed \begin_layout Plain Layout \backslash fcolorbox{black}{ \end_layout \end_inset Peach \begin_inset ERT status collapsed \begin_layout Plain Layout }{ \end_layout \end_inset \begin_inset Phantom Phantom status open \begin_layout Plain Layout W \end_layout \end_inset \begin_inset ERT status collapsed \begin_layout Plain Layout } \end_layout \end_inset Peach \end_layout \end_inset </cell> <cell alignment="left" valignment="top" usebox="none"> \begin_inset Text \begin_layout Plain Layout \begin_inset ERT status collapsed \begin_layout Plain Layout \backslash fcolorbox{black}{ \end_layout \end_inset Periwinkle \begin_inset ERT status collapsed \begin_layout Plain Layout }{ \end_layout \end_inset \begin_inset Phantom Phantom status open \begin_layout Plain Layout W \end_layout \end_inset \begin_inset ERT status collapsed \begin_layout Plain Layout } \end_layout \end_inset Periwinkle \end_layout \end_inset </cell> </row> <row> <cell alignment="left" valignment="top" usebox="none"> \begin_inset Text \begin_layout Plain Layout \begin_inset ERT status collapsed \begin_layout Plain Layout \backslash fcolorbox{black}{ \end_layout \end_inset PineGreen \begin_inset ERT status collapsed \begin_layout Plain Layout }{ \end_layout \end_inset \begin_inset Phantom Phantom status open \begin_layout Plain Layout W \end_layout \end_inset \begin_inset ERT status collapsed \begin_layout Plain Layout } \end_layout \end_inset PineGreen \end_layout \end_inset </cell> <cell alignment="left" valignment="top" usebox="none"> \begin_inset Text \begin_layout Plain Layout \begin_inset ERT status collapsed \begin_layout Plain Layout \backslash fcolorbox{black}{ \end_layout \end_inset Plum \begin_inset ERT status collapsed \begin_layout Plain Layout }{ \end_layout \end_inset \begin_inset Phantom Phantom status open \begin_layout Plain Layout W \end_layout \end_inset \begin_inset ERT status collapsed \begin_layout Plain Layout } \end_layout \end_inset Plum \end_layout \end_inset </cell> <cell alignment="left" valignment="top" usebox="none"> \begin_inset Text \begin_layout Plain Layout \begin_inset ERT status collapsed \begin_layout Plain Layout \backslash fcolorbox{black}{ \end_layout \end_inset ProcessBlue \begin_inset ERT status collapsed \begin_layout Plain Layout }{ \end_layout \end_inset \begin_inset Phantom Phantom status open \begin_layout Plain Layout W \end_layout \end_inset \begin_inset ERT status collapsed \begin_layout Plain Layout } \end_layout \end_inset ProcessBlue \end_layout \end_inset </cell> <cell alignment="left" valignment="top" usebox="none"> \begin_inset Text \begin_layout Plain Layout \begin_inset ERT status collapsed \begin_layout Plain Layout \backslash fcolorbox{black}{ \end_layout \end_inset Purple \begin_inset ERT status collapsed \begin_layout Plain Layout }{ \end_layout \end_inset \begin_inset Phantom Phantom status open \begin_layout Plain Layout W \end_layout \end_inset \begin_inset ERT status collapsed \begin_layout Plain Layout } \end_layout \end_inset Purple \end_layout \end_inset </cell> </row> <row> <cell alignment="left" valignment="top" usebox="none"> \begin_inset Text \begin_layout Plain Layout \begin_inset ERT status collapsed \begin_layout Plain Layout \backslash fcolorbox{black}{ \end_layout \end_inset RawSienna \begin_inset ERT status collapsed \begin_layout Plain Layout }{ \end_layout \end_inset \begin_inset Phantom Phantom status open \begin_layout Plain Layout W \end_layout \end_inset \begin_inset ERT status collapsed \begin_layout Plain Layout } \end_layout \end_inset RawSienna \end_layout \end_inset </cell> <cell alignment="left" valignment="top" usebox="none"> \begin_inset Text \begin_layout Plain Layout \begin_inset ERT status collapsed \begin_layout Plain Layout \backslash fcolorbox{black}{ \end_layout \end_inset RedOrange \begin_inset ERT status collapsed \begin_layout Plain Layout }{ \end_layout \end_inset \begin_inset Phantom Phantom status open \begin_layout Plain Layout W \end_layout \end_inset \begin_inset ERT status collapsed \begin_layout Plain Layout } \end_layout \end_inset RedOrange \end_layout \end_inset </cell> <cell alignment="left" valignment="top" usebox="none"> \begin_inset Text \begin_layout Plain Layout \begin_inset ERT status collapsed \begin_layout Plain Layout \backslash fcolorbox{black}{ \end_layout \end_inset RedViolet \begin_inset ERT status collapsed \begin_layout Plain Layout }{ \end_layout \end_inset \begin_inset Phantom Phantom status open \begin_layout Plain Layout W \end_layout \end_inset \begin_inset ERT status collapsed \begin_layout Plain Layout } \end_layout \end_inset RedViolet \end_layout \end_inset </cell> <cell alignment="left" valignment="top" usebox="none"> \begin_inset Text \begin_layout Plain Layout \begin_inset ERT status collapsed \begin_layout Plain Layout \backslash fcolorbox{black}{ \end_layout \end_inset Rhodamine \begin_inset ERT status collapsed \begin_layout Plain Layout }{ \end_layout \end_inset \begin_inset Phantom Phantom status open \begin_layout Plain Layout W \end_layout \end_inset \begin_inset ERT status collapsed \begin_layout Plain Layout } \end_layout \end_inset Rhodamine \end_layout \end_inset </cell> </row> <row> <cell alignment="left" valignment="top" usebox="none"> \begin_inset Text \begin_layout Plain Layout \begin_inset ERT status collapsed \begin_layout Plain Layout \backslash fcolorbox{black}{ \end_layout \end_inset RoyalBlue \begin_inset ERT status collapsed \begin_layout Plain Layout }{ \end_layout \end_inset \begin_inset Phantom Phantom status open \begin_layout Plain Layout W \end_layout \end_inset \begin_inset ERT status collapsed \begin_layout Plain Layout } \end_layout \end_inset RoyalBlue \end_layout \end_inset </cell> <cell alignment="left" valignment="top" usebox="none"> \begin_inset Text \begin_layout Plain Layout \begin_inset ERT status collapsed \begin_layout Plain Layout \backslash fcolorbox{black}{ \end_layout \end_inset RoyalPurple \begin_inset ERT status collapsed \begin_layout Plain Layout }{ \end_layout \end_inset \begin_inset Phantom Phantom status open \begin_layout Plain Layout W \end_layout \end_inset \begin_inset ERT status collapsed \begin_layout Plain Layout } \end_layout \end_inset RoyalPurple \end_layout \end_inset </cell> <cell alignment="left" valignment="top" usebox="none"> \begin_inset Text \begin_layout Plain Layout \begin_inset ERT status collapsed \begin_layout Plain Layout \backslash fcolorbox{black}{ \end_layout \end_inset RubineRed \begin_inset ERT status collapsed \begin_layout Plain Layout }{ \end_layout \end_inset \begin_inset Phantom Phantom status open \begin_layout Plain Layout W \end_layout \end_inset \begin_inset ERT status collapsed \begin_layout Plain Layout } \end_layout \end_inset RubineRed \end_layout \end_inset </cell> <cell alignment="left" valignment="top" usebox="none"> \begin_inset Text \begin_layout Plain Layout \begin_inset ERT status collapsed \begin_layout Plain Layout \backslash fcolorbox{black}{ \end_layout \end_inset Salmon \begin_inset ERT status collapsed \begin_layout Plain Layout }{ \end_layout \end_inset \begin_inset Phantom Phantom status open \begin_layout Plain Layout W \end_layout \end_inset \begin_inset ERT status collapsed \begin_layout Plain Layout } \end_layout \end_inset Salmon \end_layout \end_inset </cell> </row> <row> <cell alignment="left" valignment="top" usebox="none"> \begin_inset Text \begin_layout Plain Layout \begin_inset ERT status collapsed \begin_layout Plain Layout \backslash fcolorbox{black}{ \end_layout \end_inset SeaGreen \begin_inset ERT status collapsed \begin_layout Plain Layout }{ \end_layout \end_inset \begin_inset Phantom Phantom status open \begin_layout Plain Layout W \end_layout \end_inset \begin_inset ERT status collapsed \begin_layout Plain Layout } \end_layout \end_inset SeaGreen \end_layout \end_inset </cell> <cell alignment="left" valignment="top" usebox="none"> \begin_inset Text \begin_layout Plain Layout \begin_inset ERT status collapsed \begin_layout Plain Layout \backslash fcolorbox{black}{ \end_layout \end_inset Sepia \begin_inset ERT status collapsed \begin_layout Plain Layout }{ \end_layout \end_inset \begin_inset Phantom Phantom status open \begin_layout Plain Layout W \end_layout \end_inset \begin_inset ERT status collapsed \begin_layout Plain Layout } \end_layout \end_inset Sepia \end_layout \end_inset </cell> <cell alignment="left" valignment="top" usebox="none"> \begin_inset Text \begin_layout Plain Layout \begin_inset ERT status collapsed \begin_layout Plain Layout \backslash fcolorbox{black}{ \end_layout \end_inset SkyBlue \begin_inset ERT status collapsed \begin_layout Plain Layout }{ \end_layout \end_inset \begin_inset Phantom Phantom status open \begin_layout Plain Layout W \end_layout \end_inset \begin_inset ERT status collapsed \begin_layout Plain Layout } \end_layout \end_inset SkyBlue \end_layout \end_inset </cell> <cell alignment="left" valignment="top" usebox="none"> \begin_inset Text \begin_layout Plain Layout \begin_inset ERT status collapsed \begin_layout Plain Layout \backslash fcolorbox{black}{ \end_layout \end_inset SpringGreen \begin_inset ERT status collapsed \begin_layout Plain Layout }{ \end_layout \end_inset \begin_inset Phantom Phantom status open \begin_layout Plain Layout W \end_layout \end_inset \begin_inset ERT status collapsed \begin_layout Plain Layout } \end_layout \end_inset SpringGreen \end_layout \end_inset </cell> </row> <row> <cell alignment="left" valignment="top" usebox="none"> \begin_inset Text \begin_layout Plain Layout \begin_inset ERT status collapsed \begin_layout Plain Layout \backslash fcolorbox{black}{ \end_layout \end_inset Tan \begin_inset ERT status collapsed \begin_layout Plain Layout }{ \end_layout \end_inset \begin_inset Phantom Phantom status open \begin_layout Plain Layout W \end_layout \end_inset \begin_inset ERT status collapsed \begin_layout Plain Layout } \end_layout \end_inset Tan \end_layout \end_inset </cell> <cell alignment="left" valignment="top" usebox="none"> \begin_inset Text \begin_layout Plain Layout \begin_inset ERT status collapsed \begin_layout Plain Layout \backslash fcolorbox{black}{ \end_layout \end_inset TealBlue \begin_inset ERT status collapsed \begin_layout Plain Layout }{ \end_layout \end_inset \begin_inset Phantom Phantom status open \begin_layout Plain Layout W \end_layout \end_inset \begin_inset ERT status collapsed \begin_layout Plain Layout } \end_layout \end_inset TealBlue \end_layout \end_inset </cell> <cell alignment="left" valignment="top" usebox="none"> \begin_inset Text \begin_layout Plain Layout \begin_inset ERT status collapsed \begin_layout Plain Layout \backslash fcolorbox{black}{ \end_layout \end_inset Thistle \begin_inset ERT status collapsed \begin_layout Plain Layout }{ \end_layout \end_inset \begin_inset Phantom Phantom status open \begin_layout Plain Layout W \end_layout \end_inset \begin_inset ERT status collapsed \begin_layout Plain Layout } \end_layout \end_inset Thistle \end_layout \end_inset </cell> <cell alignment="left" valignment="top" usebox="none"> \begin_inset Text \begin_layout Plain Layout \begin_inset ERT status collapsed \begin_layout Plain Layout \backslash fcolorbox{black}{ \end_layout \end_inset Turquoise \begin_inset ERT status collapsed \begin_layout Plain Layout }{ \end_layout \end_inset \begin_inset Phantom Phantom status open \begin_layout Plain Layout W \end_layout \end_inset \begin_inset ERT status collapsed \begin_layout Plain Layout } \end_layout \end_inset Turquoise \end_layout \end_inset </cell> </row> <row> <cell alignment="left" valignment="top" usebox="none"> \begin_inset Text \begin_layout Plain Layout \begin_inset ERT status collapsed \begin_layout Plain Layout \backslash fcolorbox{black}{ \end_layout \end_inset Violet \begin_inset ERT status collapsed \begin_layout Plain Layout }{ \end_layout \end_inset \begin_inset Phantom Phantom status open \begin_layout Plain Layout W \end_layout \end_inset \begin_inset ERT status collapsed \begin_layout Plain Layout } \end_layout \end_inset Violet \end_layout \end_inset </cell> <cell alignment="left" valignment="top" usebox="none"> \begin_inset Text \begin_layout Plain Layout \begin_inset ERT status collapsed \begin_layout Plain Layout \backslash fcolorbox{black}{ \end_layout \end_inset VioletRed \begin_inset ERT status collapsed \begin_layout Plain Layout }{ \end_layout \end_inset \begin_inset Phantom Phantom status open \begin_layout Plain Layout W \end_layout \end_inset \begin_inset ERT status collapsed \begin_layout Plain Layout } \end_layout \end_inset VioletRed \end_layout \end_inset </cell> <cell alignment="left" valignment="top" usebox="none"> \begin_inset Text \begin_layout Plain Layout \begin_inset ERT status collapsed \begin_layout Plain Layout \backslash fcolorbox{black}{ \end_layout \end_inset WildStrawberry \begin_inset ERT status collapsed \begin_layout Plain Layout }{ \end_layout \end_inset \begin_inset Phantom Phantom status open \begin_layout Plain Layout W \end_layout \end_inset \begin_inset ERT status collapsed \begin_layout Plain Layout } \end_layout \end_inset WildStrawberry \end_layout \end_inset </cell> <cell alignment="left" valignment="top" usebox="none"> \begin_inset Text \begin_layout Plain Layout \begin_inset ERT status collapsed \begin_layout Plain Layout \backslash fcolorbox{black}{ \end_layout \end_inset YellowGreen \begin_inset ERT status collapsed \begin_layout Plain Layout }{ \end_layout \end_inset \begin_inset Phantom Phantom status open \begin_layout Plain Layout W \end_layout \end_inset \begin_inset ERT status collapsed \begin_layout Plain Layout } \end_layout \end_inset YellowGreen \end_layout \end_inset </cell> </row> <row> <cell alignment="left" valignment="top" usebox="none"> \begin_inset Text \begin_layout Plain Layout \begin_inset ERT status collapsed \begin_layout Plain Layout \backslash fcolorbox{black}{ \end_layout \end_inset YellowOrange \begin_inset ERT status collapsed \begin_layout Plain Layout }{ \end_layout \end_inset \begin_inset Phantom Phantom status open \begin_layout Plain Layout W \end_layout \end_inset \begin_inset ERT status collapsed \begin_layout Plain Layout } \end_layout \end_inset YellowOrange \end_layout \end_inset </cell> <cell alignment="left" valignment="top" usebox="none"> \begin_inset Text \begin_layout Plain Layout \end_layout \end_inset </cell> <cell alignment="left" valignment="top" usebox="none"> \begin_inset Text \begin_layout Plain Layout \end_layout \end_inset </cell> <cell alignment="left" valignment="top" usebox="none"> \begin_inset Text \begin_layout Plain Layout \end_layout \end_inset </cell> </row> </lyxtabular> \end_inset \end_layout \begin_layout Chapter 第( \begin_inset CommandInset ref LatexCommand ref reference "eq:Wgn" \end_inset )式の説明 \begin_inset CommandInset label LatexCommand label name "cha:式の説明" \end_inset \end_layout \begin_layout Standard \begin_inset Formula $n$ \end_inset 個の表セルの全幅 \begin_inset Formula $W_{\text{全}:n}$ \end_inset は \begin_inset Formula \begin{equation} W_{\text{全}:n}=n\cdot(W_{\text{指}:n}+2\cdot\backslash\mbox{tabcolsep})+(n+1)\cdot\backslash\mbox{arrayrulewidth}\label{eq:Wtot_n} \end{equation} \end_inset \end_layout \begin_layout Standard で計算できます.ここで \begin_inset Formula $W_{\text{指}:n}$ \end_inset は,すべてのセルが持つ固定幅です. \series bold \backslash tabcolsep \series default は,セルテキストとセル罫線のあいだを指す\SpecialChar LaTeX 長であり,既定値は6 \begin_inset space \thinspace{} \end_inset ptです. \series bold \backslash arrayrulewidth \series default は,セル罫線幅であり,既定値は0.4 \begin_inset space \thinspace{} \end_inset ptです. \end_layout \begin_layout Standard 第 \begin_inset CommandInset ref LatexCommand eqref reference "eq:Wtot_n" \end_inset 式にしたがえば,連結列の全幅 \begin_inset Formula $W_{\text{全}:\text{連結列}}$ \end_inset は \begin_inset Formula \begin{equation} W_{\text{全}:\text{連結列}}=W_{\text{指}:\text{連結列}}+2\cdot\backslash\mbox{tabcolsep}+2\cdot\backslash\mbox{arrayrulewidth}\label{eq:Wtot_mult} \end{equation} \end_inset \end_layout \begin_layout Standard となります. \begin_inset Formula $n$ \end_inset 列を連結する時には各列の全幅は \begin_inset Formula $W_{\text{全}:\text{連結列}}/n$ \end_inset となるので,第 \begin_inset CommandInset ref LatexCommand eqref reference "eq:Wtot_n" \end_inset 式と第 \begin_inset CommandInset ref LatexCommand eqref reference "eq:Wtot_mult" \end_inset 式が等しいものと置けば,必要となる固定幅 \begin_inset Formula $W_{\text{指}:n}$ \end_inset を計算することができて, \begin_inset Formula \begin{equation} W_{\text{指}:n}=\frac{W_{\text{指}:\text{連結列}}+(1-n)\cdot(2\cdot\backslash\mbox{tabcolsep}+\backslash\mbox{arrayrulewidth})}{n} \end{equation} \end_inset となります. \end_layout \begin_layout Bibliography \labelwidthstring 参考文献 \begin_inset CommandInset bibitem LatexCommand bibitem key "latexcompanion" literal "true" \end_inset Frank Mittelbach and Michel Goossens: \emph on The \SpecialChar LaTeX Companion Second Edition. \emph default Addison-Wesley, 2004 \end_layout \begin_layout Bibliography \labelwidthstring 参考文献 \begin_inset CommandInset bibitem LatexCommand bibitem key "latexguide" literal "true" \end_inset Helmut Kopka and Patrick W. Daly: \emph on A Guide to \SpecialChar LaTeX Fourth Edition. \emph default Addison-Wesley, 2003 \end_layout \begin_layout Bibliography \labelwidthstring 参考文献 \begin_inset CommandInset bibitem LatexCommand bibitem key "latexbook" literal "true" \end_inset Leslie Lamport: \emph on \SpecialChar LaTeX : A Document Preparation System. \emph default Addison-Wesley, second edition, 1994 \end_layout \begin_layout Bibliography \labelwidthstring 参考文献 \begin_inset CommandInset bibitem LatexCommand bibitem key "arydshln" literal "true" \end_inset \SpecialChar LaTeX パッケージ \series bold \begin_inset CommandInset href LatexCommand href name "arydshln" target "ftp://tug.ctan.org/pub/tex-archive/macros/latex/contrib/arydshln/arydshln.pdf" literal "false" \end_inset \series default \begin_inset Index idx status collapsed \begin_layout Plain Layout \SpecialChar LaTeX ぱっけーじ@\SpecialChar LaTeX パッケージ ! arydshln \end_layout \end_inset \end_layout \begin_layout Bibliography \labelwidthstring 参考文献 \begin_inset CommandInset bibitem LatexCommand bibitem key "booktabs" literal "true" \end_inset \SpecialChar LaTeX パッケージ \series bold \begin_inset CommandInset href LatexCommand href name "booktabs" target "ftp://tug.ctan.org/pub/tex-archive/macros/latex/contrib/booktabs/booktabs.pdf" literal "false" \end_inset \series default \begin_inset Index idx status collapsed \begin_layout Plain Layout \SpecialChar LaTeX ぱっけーじ@\SpecialChar LaTeX パッケージ ! booktabs \end_layout \end_inset の取扱説明書 \end_layout \begin_layout Bibliography \labelwidthstring 参考文献 \begin_inset CommandInset bibitem LatexCommand bibitem key "caption" literal "true" \end_inset \SpecialChar LaTeX パッケージ \series bold \begin_inset CommandInset href LatexCommand href name "caption" target "http://mirrors.ctan.org/macros/latex/contrib/caption/caption-eng.pdf" literal "false" \end_inset \series default \begin_inset Index idx status collapsed \begin_layout Plain Layout \SpecialChar LaTeX ぱっけーじ@\SpecialChar LaTeX パッケージ ! caption \end_layout \end_inset の取扱説明書 \end_layout \begin_layout Bibliography \labelwidthstring 参考文献 \begin_inset CommandInset bibitem LatexCommand bibitem key "diagbox" literal "true" \end_inset \SpecialChar LaTeX パッケージ \series bold \begin_inset CommandInset href LatexCommand href name "diagbox" target "ftp://tug.ctan.org/pub/tex-archive/macros/latex/contrib/diagbox/diagbox.pdf" literal "false" \end_inset \series default \begin_inset Index idx status collapsed \begin_layout Plain Layout \SpecialChar LaTeX ぱっけーじ@\SpecialChar LaTeX パッケージ ! diagbox \end_layout \end_inset \end_layout \begin_layout Bibliography \labelwidthstring 参考文献 \begin_inset CommandInset bibitem LatexCommand bibitem key "endfloat" literal "true" \end_inset \SpecialChar LaTeX パッケージ \series bold \begin_inset CommandInset href LatexCommand href name "endfloat" target "ftp://tug.ctan.org/pub/tex-archive/macros/latex/contrib/endfloat/endfloat.pdf" literal "false" \end_inset \series default \begin_inset Index idx status collapsed \begin_layout Plain Layout \SpecialChar LaTeX ぱっけーじ@\SpecialChar LaTeX パッケージ ! endfloat \end_layout \end_inset の取扱説明書 \end_layout \begin_layout Bibliography \labelwidthstring 参考文献 \begin_inset CommandInset bibitem LatexCommand bibitem key "footmisc" literal "true" \end_inset \SpecialChar LaTeX パッケージ \series bold \begin_inset CommandInset href LatexCommand href name "footmisc" target "ftp://tug.ctan.org/pub/tex-archive/macros/latex/contrib/footmisc/footmisc.pdf" literal "false" \end_inset \series default \begin_inset Index idx status collapsed \begin_layout Plain Layout \SpecialChar LaTeX ぱっけーじ@\SpecialChar LaTeX パッケージ ! footmisc \end_layout \end_inset の取扱説明書 \end_layout \begin_layout Bibliography \labelwidthstring 参考文献 \begin_inset CommandInset bibitem LatexCommand bibitem key "hypcap" literal "true" \end_inset \SpecialChar LaTeX パッケージ \series bold \begin_inset CommandInset href LatexCommand href name "hypcap" target "http://www.ctan.org/tex-archive/macros/latex/contrib/oberdiek/hypcap.pdf" literal "false" \end_inset \series default \begin_inset Index idx status collapsed \begin_layout Plain Layout \SpecialChar LaTeX ぱっけーじ@\SpecialChar LaTeX パッケージ ! hyperref \end_layout \end_inset の取扱説明書 \end_layout \begin_layout Bibliography \labelwidthstring 参考文献 \begin_inset CommandInset bibitem LatexCommand bibitem key "hyperref" literal "true" \end_inset \SpecialChar LaTeX パッケージ \series bold \begin_inset CommandInset href LatexCommand href name "hyperref" target "ftp://tug.ctan.org/pub/tex-archive/macros/latex/contrib/hyperref/hyperref.pdf" literal "false" \end_inset \series default \begin_inset Index idx status collapsed \begin_layout Plain Layout \SpecialChar LaTeX ぱっけーじ@\SpecialChar LaTeX パッケージ ! hyperref \end_layout \end_inset の取扱説明書 \end_layout \begin_layout Bibliography \labelwidthstring 参考文献 \begin_inset CommandInset bibitem LatexCommand bibitem key "KOMA-script" literal "true" \end_inset \SpecialChar LaTeX パッケージ \series bold \begin_inset CommandInset href LatexCommand href name "KOMA-script" target "http://mirror.ctan.org/macros/latex/contrib/koma-script/doc/scrguien.pdf" literal "false" \end_inset \series default \begin_inset Index idx status collapsed \begin_layout Plain Layout \SpecialChar LaTeX ぱっけーじ@\SpecialChar LaTeX パッケージ ! KOMA-script \end_layout \end_inset の取扱説明書 \end_layout \begin_layout Bibliography \labelwidthstring 参考文献 \begin_inset CommandInset bibitem LatexCommand bibitem key "lettrine" literal "true" \end_inset \SpecialChar LaTeX パッケージ \series bold \begin_inset CommandInset href LatexCommand href name "lettrine" target "http://mirrors.ctan.org/macros/latex/contrib/lettrine/doc/lettrine.pdf" literal "false" \end_inset \series default 及び \begin_inset CommandInset href LatexCommand href name "用例" target "http://mirrors.ctan.org/macros/latex/contrib/lettrine/doc/demo.pdf" literal "false" \end_inset \begin_inset Index idx status collapsed \begin_layout Plain Layout \SpecialChar LaTeX ぱっけーじ@\SpecialChar LaTeX パッケージ ! lettrine \end_layout \end_inset \end_layout \begin_layout Bibliography \labelwidthstring 参考文献 \begin_inset CommandInset bibitem LatexCommand bibitem key "listings" literal "true" \end_inset \SpecialChar LaTeX パッケージ \series bold \begin_inset CommandInset href LatexCommand href name "listings" target "ftp://tug.ctan.org/pub/tex-archive/macros/latex/contrib/listings/listings.pdf" literal "false" \end_inset \series default \begin_inset Index idx status collapsed \begin_layout Plain Layout \SpecialChar LaTeX ぱっけーじ@\SpecialChar LaTeX パッケージ ! listings \end_layout \end_inset の取扱説明書 \end_layout \begin_layout Bibliography \labelwidthstring 参考文献 \begin_inset CommandInset bibitem LatexCommand bibitem key "marginnote" literal "true" \end_inset \SpecialChar LaTeX パッケージ \series bold \begin_inset CommandInset href LatexCommand href name "marginnote" target "ftp://tug.ctan.org/pub/tex-archive/macros/latex/contrib/marginnote/marginnote.pdf" literal "false" \end_inset \series default \begin_inset Index idx status collapsed \begin_layout Plain Layout \SpecialChar LaTeX ぱっけーじ@\SpecialChar LaTeX パッケージ ! marginnote \end_layout \end_inset の取扱説明書 \end_layout \begin_layout Bibliography \labelwidthstring 参考文献 \begin_inset CommandInset bibitem LatexCommand bibitem key "pdfpages" literal "true" \end_inset \SpecialChar LaTeX パッケージ \series bold \begin_inset CommandInset href LatexCommand href name "pdfpages" target "http://www.ctan.org/tex-archive/macros/latex/contrib/pdfpages/pdfpages.pdf" literal "false" \end_inset \series default \begin_inset Index idx status collapsed \begin_layout Plain Layout \SpecialChar LaTeX ぱっけーじ@\SpecialChar LaTeX パッケージ ! pdfpages \end_layout \end_inset の取扱説明書 \end_layout \begin_layout Bibliography \labelwidthstring 参考文献 \begin_inset CommandInset bibitem LatexCommand bibitem key "prettyref" literal "true" \end_inset \SpecialChar LaTeX パッケージ \series bold \begin_inset CommandInset href LatexCommand href name "prettyref" target "http://www.ctan.org/tex-archive/macros/latex/contrib/prettyref/prettyref.pdf" literal "false" \end_inset \series default \begin_inset Index idx status collapsed \begin_layout Plain Layout \SpecialChar LaTeX ぱっけーじ@\SpecialChar LaTeX パッケージ! prettyref \end_layout \end_inset の取扱説明書 \end_layout \begin_layout Bibliography \labelwidthstring 参考文献 \begin_inset CommandInset bibitem LatexCommand bibitem key "pstricks" literal "true" \end_inset \SpecialChar LaTeX パッケージ \series bold \begin_inset CommandInset href LatexCommand href name "PSTricks" target "http://tug.org/PSTricks/" literal "false" \end_inset \series default \begin_inset Index idx status collapsed \begin_layout Plain Layout \SpecialChar LaTeX ぱっけーじ@\SpecialChar LaTeX パッケージ ! PSTricks \end_layout \end_inset のウェブページ \end_layout \begin_layout Bibliography \labelwidthstring 参考文献 \begin_inset CommandInset bibitem LatexCommand bibitem key "refstyle" literal "true" \end_inset \SpecialChar LaTeX パッケージ \series bold \begin_inset CommandInset href LatexCommand href name "refstyle" target "http://www.ctan.org/tex-archive/macros/latex/contrib/refstyle/refstyle.pdf" literal "false" \end_inset \series default \begin_inset Index idx status collapsed \begin_layout Plain Layout \SpecialChar LaTeX ぱっけーじ@\SpecialChar LaTeX パッケージ ! refstyle \end_layout \end_inset の取扱説明書 \end_layout \begin_layout Bibliography \labelwidthstring 参考文献 \begin_inset CommandInset bibitem LatexCommand bibitem key "sidecap" literal "true" \end_inset \SpecialChar LaTeX パッケージ \series bold \begin_inset CommandInset href LatexCommand href name "sidecap" target "ftp://tug.ctan.org/pub/tex-archive/macros/latex/contrib/sidecap/sidecap.pdf" literal "false" \end_inset \series default \begin_inset Index idx status collapsed \begin_layout Plain Layout \SpecialChar LaTeX ぱっけーじ@\SpecialChar LaTeX パッケージ ! sidecap \end_layout \end_inset の取扱説明書 \end_layout \begin_layout Bibliography \labelwidthstring 参考文献 \begin_inset CommandInset bibitem LatexCommand bibitem key "Inkscape" literal "true" \end_inset \lang english Documentation of the option \begin_inset CommandInset href LatexCommand href name "Omit text in PDF" target "http://tug.ctan.org/tex-archive/info/svg-inkscape/InkscapePDFLaTeX.pdf" literal "false" \end_inset of the program \lang japanese \noun on \begin_inset CommandInset href LatexCommand href name "Inkscape" target "https://inkscape.org/ja/" literal "false" \end_inset \end_layout \begin_layout Standard \begin_inset CommandInset index_print LatexCommand printindex type "idx" name "索引" literal "false" \end_inset \end_layout \end_body \end_document