lyx_mirror/NEWS

What's new in version 1.3.0?
----------------------------

As with the previous major version 1.2.0, many things make this new
release an exciting one. This should not however hide the fact that
the `under the hood' changes to the code have been (again) very
important. One of these invisible changes that have been going on for
a long time is the so-called GUI-independence project. We are glad to
announce that version 1.3.0 shows the first results of this.

** Qt frontend

This is of course the most visible new feature. This frontend supports
either Qt 2.x or 3.0.x and is mostly feature complete. The dialogs are
not copies of those of xforms, but that some different design choices
have been made.

There are a few caveats though:

- John???

** Xforms frontend

The avent of the Qt frontend does not mean that the historical xforms
frontend is dead. Actually, it is still the one which is the best
implemented, since we had much time to polish it. In this release,
most of the dialogs have been redesigned to be tighter.

Note also that the xforms library has been very recently updated to
version 1.0. This version has been released under the GPL, and the
availability of the source means that many bugs that have been
plaguing LyX have been fixed in xforms. You are advised to upgrade to
xforms 1.0 to enjoy all these new fixes. As a matter of fact, LyX
1.3.0 does not support anymore versions of xforms older than 0.89.5.

New features:

- Angus??

** Gnome frontend

Unfortunately, the development of the Gnome frontend has mostly
stopped recently and we have therefore disabled it. We strongly invite
anyone willing to revive this port to volunteer on the developpers
list.

** Instant preview

preview-latex is an emacs package for LaTeX that allows "instant
previews" of LaTeX code, so you can immediately see the visual
rendering of the LaTeX in the document. With the help of David
Kastrup, the author, current CVS LyX can harness this functionality to
allow instant previews in the LyX window of math equations and
figures. This feature can be immensely useful for making sure the
rendering of your equation will look right in the final output. The
preview is only displayed (when enabled) when you're not editing the
actual equation, so it's unobtrusive too.

** Math editor

Andre??

** Miscellaneous changes

- LyX now automatically uses TeX fonts for screen rendering if they are
  available (it is not necessary anymore to configure your font server).

- Other??

What's new in version 1.2.2?
----------------------------

LyX 1.2.2 is a maintenance release. It is a recommended upgrade from
1.2.0 or 1.2.1, especially since it fixes a few bugs introduced in
1.2.1.

** Updates

- LyX builds with the newly released xforms 1.0. Actually, it is
  advised to use this version of xforms, since it fixes many bugs and
  support for older versions will probably be dropped in LyX 1.3.0

- selecting a word by double clicking now sets the X clipboard (like
  when dragging the mouse)

- it is now possible to specify the arguments for viewers; in
  particular, this means that it is possible to use browsers which
  require a file: URL as HTML viewers (mozilla is used as default if
  found)

- when a new LyX version is launched, the Edit>Reconfigure tool is
  automatically invoked; this should avoid many problems with users
  who are not aware that it is needed

- when changing the current layout with the toolbar, the corresponding
  keyboard binding is shown in the minibuffer

- in hebrew language, the key " now inserts a typewriter quote (since
  other quotes do not make sense in hebrew)

- Insert>Lists & TOC>Bibtex Reference uses style 'plain' by default

- new class ijmpd; update cl2emult, llncs and foils textclasses

- update sciword bindings

- small cleanup of UserGuide and FAQ; update to German, French and
  Russian documentation; new Hebrew tutorial

- update french, german, russian, finnish and danish localization of
  the interface


What's new in version 1.2.1?
----------------------------

LyX 1.2.1 is a maintenance release which fixes many bugs in version
1.2.0. We hope in this way to enhance world happiness, allowing the
developers to continue busily to prepare the next major release
1.3.0. There are a lot of fixes in there, and upgrading is highly
recommended.

** Updates

- it is now possible to build LyX with xforms 1.0rc4 (and probably 1.0
  when this gets released) 

- partial rewrite of the find & replace feature. This should solve most of
  the performance problems

- new option `keep aspect ratio' in graphics dialog

- revert to the old behaviour when creating new floats (figure,
  table...): the empty paragraph in the float now is a caption. It
  seems that 1.2.0 behaviour was confusing too many people

- it is now possible to set the float placement parameters to
  "document defaults"

- when the cursor is inside a collapsible inset, `Edit>Open/close
  float' will leave it after the inset after closing it (this should
  help entering of ERT insets)

- update Finnish, Danish, French and Russian localizations

- update Tutorial to 1.2.x features

- better support for entering Cyrillic and Greek alphabets

- cleanup shortcuts for section layouts. Starred versions are now
  obtained by prepending a * to the section number (M-p asterisk 0, ...,
  M-p asterisk 6)

- add keyboard shortcuts to the Documents menu

- support the numpad direction keys as equivalent to normal cursor
  keys

- it is now possible to specify a non-existent file name on the command
  line and have this file created for you

- new class cl2emult; update template for IEEEtran; small update to
  heb-article and hollywood textclasses


What's new in version 1.2.0?
----------------------------

LyX 1.2.0 is the version where many of changes in the 1.1.x series
really begin to pay off. It should prove to be a very solid base for
further developments. As of this version, we use (yet another) new
versioning scheme: next major version will be 1.3.0, and 1.2.x will
be just incremental fixes (like the `fix' series used to be for 1.1.5
and 1.1.6). 

This version sees the introduction of the so-called `new' insets,
which can contain arbitrary text. As a consequence, many new features
are now possible:

- Floats, footnotes and margin notes are now real insets. The
  positional parameters of figure, table and algorithm floats can be set
  float-by-float

- Most problems with the new table inset of 1.1.6 have been addressed
  (memory consumption, file bloat, spell-checking, search and replace...). 
  Better longtable header/footer support was implemented.

- TeX mode has been superseded by the ERT inset, which is foldable, or
  can be shown inline

- Notes inset can now contain arbitrary LyX constructs; they will not
  appear in the output.

- New minipage inset

Note that another consequence of these changes is that older LyX
versions will almost certainly fail to read files produced by LyX
1.2.0.


Other more traditional insets have been improved too:

- New graphics inset with support for hassle-free inclusion of various
  image formats (GIF, JPEG, PNG and EPS by default) and a new
  rendering scheme that should fix the bugs we had with the older
  ghostscript method.

- Support for natbib for bibliography citations



The math editor has been mostly rewritten. This begun as a general
cleanup, but it turns out that many new features happened in this
process, among which:

- many of the known bugs or annoyances in mathed have been fixed.

- possibility to display all standard latex and amsmath symbols (and
  also the \mathcal, \mathbb, and \mathfrak fonts)as long as the
  relevant fonts have been made available to the X server

- support for many amsmath features
  Commands: xrightarrow, xleftarrow, substack, underset, dddot
  over/under arrows (e.g. underleftarrow).
  Environments: align, alignat, xalignat, xxalignat, multline, gather
  split, gathered, aligned, cases, subarray, pmatrix, bmatrix, vmatrix, 
  Vmatrix

- Preliminary support for xymatrix

- Support for horizontal and vertical lines in arrays.

- Improvements to the parser

- Improvements to math text mode

- (Better) support for nested macros 

- Enable size changes to arrays after creation (add/delete rows/columns)

- Support for changing font or displaystyle on a selection

- GUI support provided for many more features


Other changes include:

- Support for windows with cygwin has been incorporated into the main
  distribution.

- Most of the dialogs have been rewritten in the GUI-I framework, and
  improved in the process

- The kde frontend has been dropped in favor of a new qt2 frontend.
  Note that only the xforms front is really operational as of this
  version and alternative frontends are expected for 1.3.0

- The citation dialog has a search facility, with support for regular
  expressions.

- New ligature break special character, useful for words like
  "shelfful", or many german words

- Support for parsing preamble when converting LaTeX files. Along 
  with changes in the LaTeX production of alignment options, this 
  improves round-trip work where you export a LyX document as 
  LaTeX, and later reimport it from LaTeX.

- Updated documentation

- a few more document classes for journals: dtk, ltugboat, spie and 
  svprobth.

- Support for setting bookmarks and jumping to them

- It is possible to cycle between a label and its references.

- Preliminary support for multiple bibliographies

- Babel can be disabled

- A thesaurus facility (English only)

What's new in LyX version 1.1.6fix4?
------------------------------------

LyX 1.1.6fix4 is a bugfix release.

New features:

- add support for latin3, latin4 and latin9 encodings

- change the encoding for estonian from latin4 to latin1, since it
  appears to be more suitable.

- add support for ae fonts (emulation of T1 encoding with OT1 fonts).
  This is useful for creating pdf files in T1 encoding

- add support for dvipdfm

- when passing a file name as argument from command line, the
  extension `.lyx' is added if necessary

- insert error insets in the documents when there have been unknown
  tokens in the file

- new class `kluwer'; update to hollywood class

- the class encts has been renamed to entcs (stupid typo!) and
  slightly updated

- updates to the introduction document and the italian user guide

- updates to the russian, finnish and hebrew localisations


What's new in LyX version 1.1.6fix3?
------------------------------------

LyX 1.1.6fix3 is a bugfix release.

New features:

- documentation has been updated to remove errors due to interface
  change 

- new italian user guide; updated french localisation of menus and
  documentation; new dutch translations of some examples

- the `history' and `revert' functionalities have been implemented in CVS
  support 

- it is now possible to enter directly characters in an encoding
  different from latin1 (providing one is using a correct screen font)

- new encts class for Elsevier Science's Electronic Notes in
  Theoretical Computer Science 

- new cv class for writing curriculum vitae

- new extarticle, extreport, extbook and extletter classes, which are
  versions of the normal classes with more font sizes available

- the aapaper class has been complemented with a aa class for the A&A
  LaTeX document class version 5.0, which is slightly incompatible
  with the older version


What's new in LyX version 1.1.6fix2?
------------------------------------

LyX 1.1.6fix2 is a bugfix release.

New features:

- add language support in docbook; better support for verbatim text.

- the --with-lyx-suffix flag introduced in 1.1.6fix1 has been renamed
  to --with-version-suffix; it can now be used without argument (to
  install as lyx-1.1.6fix2)

- many translations updated; big french documentation overhaul; german
  documentation update.

- preliminary Thai support; new serbo-croatian support


What's new in LyX version 1.1.6fix1?
------------------------------------

LyX 1.1.6fix1 is a bugfix release.

New features:

- updated documentation for version 1.1.6; new french documentation
  translations; updated danish translation of the interface.

- better support for ukrainian language

- non working --with-lyxname configure option has been replaced by
  working --with-lyx-suffix.

- in default cua bindings, change C-k from font-noun to
  line-delete-forward. 

- Add the prefix "key-" to the default keys for bibliography insets.

- Show both key and label of a bibliography inset.


What's new in LyX version 1.1.6?
--------------------------------

As with all of the 1.1.x versions of LyX, this release contains a lot
of new code: in particular, more than half of the changes described in
the ChangeLog (which dates back to the 1.1.0 release) concern LyX 1.1.6!

Besides the usual under-the-hood changes, LyX 1.1.6 has many
new user-visible features. The main visible feature is that the
GUI-independent branch of development has been merged, as well as code
from the older development version:

- many popups have been rewritten to use the new GUI-I scheme. In the
  process they have received a nice cleanup: the Document and Paragraph
  popups now contain in one single place what was previously scattered
  in many places. Similarly, the citation and cross reference popups
  have been overhauled.

- LyX now has a Preference popup where you can change most of your
  lyxrc settings.

- the menus can now be defined in a text file, and they automatically
  display the keyboard bindings associated with commands.

- it is now possible to provide your own icons for the toolbar.

- last but not least, work has begun on a KDE and a Gnome frontend for
  LyX. They are not officially supported for this version, but this
  will give you an idea of what is happening.

Other major changes in 1.1.6 include:

- the table support has been completely rewritten. It is now a modular
  object (inset), each cell of which owns a (also) newly written text
  inset. This now permits automatic text-wrap inside a tabular
  cell (if you define a width), multiparagraph mode AND setting of
  layouts for the paragraphs (lists inside a tabular cell!). Last but
  not least, a wide tabular now scrolls automatically so that all of it
  is visible without the need to enlarge the window!

  While there are as yet no other new features, they will be now MUCH
  easier to add. It may be that because of being "young" code some
  features may not work right now, but at least it is much
  better than before.

- new external material inset: this is a new kind of very powerful
  inset which will allow LyX to interface intelligently with external
  applications. Among other good things, it will finally allow you to 
  include GIF, JPEG, TIF, PNG, or just about any other raster format
  images in your document. It will even do an approximate ascii
  rendering when you do Ascii export if you have gifscii installed.

- The code which converts from LyX format to anything else (for
  viewing or exporting purposes) and from anything else to LyX has been
  rewritten. In particular, it is now possible to export to PDF, and to
  import from HTML/MSWord. In fact it's now possible to add new import/export
  formats without recompiling LyX by specifying external programs or scripts
  in lyxrc settings 
  (note that the old import/export lyxrc settings no longer work).

- LyX can do command line exports without opening any GUI components.

- The multilingual support has been improved. It is now possible to use in a
  document languages with different encodings, e.g. German (iso8859-1) and
  Czech (iso8859-2). Such a document can be viewed on screen using an
  iso10646-1 (Unicode) font. However, it is (currently) not possible to
  have differently encoded languages in the same paragraph.
  The languages and the encodings are defined in text files.

- Improved support for Hebrew and Arabic (also present in 1.1.5fix2).

- included files work now with docbook and linuxdoc; new layout
  docbook-book.

- PSpell library and Aspell spell checker support now included thanks
  largely to Kevin Atkinson (PSpell and Aspell maintainer). 

And finally, there have been a lot of smaller changes, which are
mentioned here for your information

- the menu entry File->New does not prompt for a file name by default
  (this can be changed in preferences).

- new -geometry command line option, which replaces the old -width,
  -height, etc.



What's new in LyX version 1.1.5?
--------------------------------

Lots of internal code rewritten, fixed, changed and added. 
We are using the C++ Standard Library more each day.
This will in most cases make the code clearer and easier to maintain
and expand.
We are also gearing up for the merge of the gui-indep branch, expect
this (but not the new gui's) in 1.1.6.

User-visible changes:

- Paste to other programs (like emacs or xterm). Note: text only.

- New TOC menu item for fast access to the table of contents.

- New Refs menu item for quick insertion of cross-references.

- multilingual documents (preliminary support)

- Right-to-Left support for Hebrew and Arabic, this is a first attempt
  only and is likely to improve in future versions.

- Per-paragraph spacing, currently only settable from the
  command-line/window:
      paragraph-spacing (default,single,onehalf,double,other) [float]

- New visual feedback for environment depth of paragraphs (also the !
  in the margin for margin notes has been removed). 

- End-of-proof box, for layouts where it makes sense.

- labels are now editable (not in equations, though).

- Much faster spellchecking (50x faster!).

- The parsing of the LaTex log has improved flagging more errors that
  earlier versions of LyX did not see at all. So if you suddenly have
  errors in documents that used to have none, this might be the casue.
  (And you probably had the error always.)

- Better definition for LyXList style.

- hollywood.layout and broadway.layout have improved. New classes
  LLNCS (Lecture Notes in Computer Science), svjog (Journal of Geodesy)

- support for varioref and pretty ref (preliminary support)

- A couple of changes to the LyX format, so that files written with
  1.1.5 will not be parsed correctly by older LyX versions if protected
  spaces or the new per-paragraph spacing are used. Also the RtL
  support is of course not supported in older versions.

- Removed support for XForms older than 0.88.

- Some command-line options and X resources are not supported anymore
  (The color ones, and -mono -fastselection, -reverse)

- New command-line options '-userdir' which so that you can choose to
  use another dir than .lyx for user configurations. (Or have many.)

- new lyxrc variables: \show_banner [true|false] to remove the banner
  screen, \backupdir_path to tell where the backup files created
  by lyx should be stored, and \override_x_deadkeys to tell whether 
  lyx should provide its own accent keys handling (default is true). 


What's new in LyX version 1.1.4?
--------------------------------

More internals have been rethought. In particular, most of the file IO
routines of LyX have been rewritten to use real C++ streams. Many
changes have also been done to help compile LyX with Sun CC 5.0 and
SGI STL 3.2. 

In the user-visible department, we find:

- new command line option -x (or --execute) and -e (or --export). Now
  direct conversion from .lyx to .tex (.dvi, .ps, ...) is possible
  ('lyx file.lyx --export latex') Unfortunately, X is still needed and
  the GUI pops up during the process...

- better placement of accents for characters that LyX draws by itself;

- improved translations, in particular in Finnish (overhauled UI
  translation), Dutch (tutorial and examples), German

- new configure flag --with-lyxname which allows to choose the name
  under which lyx is installed. Default is "lyx", of course. It used
  to be possible to do this with --program-suffix, but the later has
  in fact a different meaning for autoconf.

And of course, a lot of old bugs have been replaced by new ones ;)


What's new in LyX version 1.1.3?
--------------------------------

More LyX internals have been cleaned-up in this version, but the usual
small number of user-visible changes have appeared:

- LyX is not able anymore to read some old files using latex inset
  (this should not be a problem as these were already not generated by
  LyX 0.12.0). Use LyX 1.0.4 to read files containing those.

- The first line of a .lyx file does not contain anymore the file
  creator name and the date of creation; this was causing various
  problems. 

- the -dbg command line switch is enhanced. For example, "-dbg lyxrc"
  works now. 

- Slightly better handling of dependency tracking for bibtex files.

- The screen representations of \varepsilon and \epsilon have been
  swapped. Now \epsilon shows as red text, and \varepsilon shows as it
  should. This is of course a controversial change (since many people
  will find that their lyx workscreen is suddenly full of red), but done
  for the sake of correctness.

- The characters \angle and \vee are now correctly displayed in math
  formulas; the glyph for \Upsilon has been changed.

- Characters '~' and '^' are now output using standard LaTeX macros,
  which improves the result with T1 fonts.

- new function "command-sequence" to bind several sequences to a key.

- The textclass g-brief has been updated.

And of course many bugs have been fixed.

What's new in LyX version 1.1.2?
--------------------------------

LyX 1.1.2 is a minor upgrade to 1.1.1, only one new feature has been added:

- the export to html feature has been extended to use other programs.
  Currently, tth, latex2html and hevea are supported. Note that the
  variable \tth_command has been renamed to \html_command in lyxrc.

Moreover, a couple of semi-serious bugs have been fixed:

- a bug that caused a crash in lyxstring::find

- the annoying '-' vs. '_' bug.

Also the cheaders files were missing from the 1.1.1 distribution, that
has also been fixed.

What's new in LyX version 1.1.1?
--------------------------------

LyX 1.1.1 marks an important change in our development scheme. While
it does not have many new features, there have been many internal
changes, many of which have been backported from our old development
branch (which is now extinct). So while on the surface this version is
very similar to version 1.0.4, many things happened under the hood. As
a consequence of this: expect that some new bugs have crept in.

User visible changes in lyx 1.1.1: 

- New export to HTML feature

- All the popups should be more resistant to resize actions.

- normal spaces are automatically made unbreakable if we are in
  a freespacing mode (LyX-Code), but not in latex mode. The rule used
  to be that spaces where changed when in typewriter font.

- the default encoding of a new document is now latin1, since it seems
  to be a reasonable default for many people. Note that you can
  override this default with the "Save layout as default" feature.

What's new in 1.0.4 compared to LyX version 1.0.3?
--------------------------------------------------

LyX 1.0.4 is mainly a bugfix update to 1.0.3, but some
new features has been included:

- DocBook support.

- RevTeX4.

- Better printing with custom pagesizes.

- Several language files updated.

- And several bugfixes to math and table.

What's new in 1.0.3 compared to LyX version 1.0.2?
--------------------------------------------------

LyX 1.0.3 is mainly a bugfix update to 1.0.2.

- improved dependency tracking when running LaTeX (fixes one important
  bug in 1.0.2).

- new italian and walloon localizations of the user interface.

- New slovene and spanish translations of the Tutorial.

What's new in 1.0.2 compared to LyX version 1.0.1?
--------------------------------------------------

LyX 1.0.2 is a minor update to LyX 1.0.1. Besides fixing many bugs
compared to version 1.0.0, it adds the following features:

- Improved reLyX: supports EPS image inclusion and works in windows.

- New french translation of Intro.lyx and Tutorial.lyx; new german
  translation of UserGuide.lyx.

- Better multipart document support.

- LyX is now able to parse your BibTex files and show a list of
  entries. 

- New broadway textclass (for plays).


What's new in 1.0.1 compared to LyX version 1.0.0?
--------------------------------------------------

LyX 1.0.1 is a minor update to LyX 1.0.0. Besides fixing many bugs
compared to version 1.0.0, it adds the following features:

- Support for selecting pages and number of copies in print dialog

- New function 'Replace all' in Find&Replace popup

- Support for optional argument of \sqrt in math editor

- Support for literate programming with the 'noweb' program

- New LaTeX document classe: APA 



What's new in 1.0.0 compared to LyX version 0.12.0?
----------------------------------------------------

LyX 1.0.0 is a stable release. Besides fixing many bugs compared to
version 0.12.0, it adds the following features:

- much improved reLyX script: many bugs have been fixed, new options
  have been added, many constructs are now correctly handled. reLyX is now 
  installed along with LyX and has its own man page. Separate upgrades
  of reLyX will be made available later.  The reLyX script is utilized
  by the File->Import LaTeX command in LyX.

- Much improved LinuxDoc (sgml-tools) support: multiple textclasses,
  footnotes, and generally better output.

- New textclasses scrartcl, scrbook, scrreprt and scrlettr
  implementing the corresponding classes of the koma-script
  package. New textclasses latex8 for some IEEE journals, IEEEtran for
  various IEEE Transactions journals and ejour2 for some Springer Verlag
  Journals.  New textclass hollywood to typeset your own film scripts.

- Better support (keyboard bindings, keyboard mappings, and/or menu
  and error message translations) for several languages.

- Documentation has been partly translated to German, Swedish, and Czech. You
  will get this automatically from the Help menu if you set up the LANG
  environment variable correctly (i.e. to 'de' or 'sv').

- Documentation has been generally improved and expanded.

- Improved table support.

- Support for arbitrary line spacing in documents.

- easier handling of index entries.

- The printer configuration scheme has changed a bit to help people
  whose dvips is not configured correctly. As a consequence, you might
  have to modify your lyxrc a bit. All users are advised to re-run
  Option->Reconfigure to update LyX configuration.


Note that your existing global lyxrc file will not be overwritten by
default since now LyX only installs a file lyxrc.example to use as
template.