lyx_mirror/lib/lyxrc.example
Jean-Marc Lasgouttes 8d478c5e29 Two patches from Claus; two patches from Andre' (with additional bugfixes)
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@703 a592a061-630c-0410-9148-cb99ea01b6c8
2000-04-28 11:18:04 +00:00

717 lines
26 KiB
Plaintext
Raw Blame History

### This file is part of
### =====================================================
###
### LyX, the High Level Word Processor
###
### Copyright 1995-1997 Matthias Ettrich & the LyX Team
###
### =====================================================
# The file lyxrc.example is a template to write your own lyxrc file.
# If you copy/rename it to lyxrc in the current directory, it will
# give global options for all LyX users. It is also possible to copy
# this file to $HOME/.lyx/lyxrc so that the configuration applies to a
# particular user.
#
# Several of these settings have defaults that are auto-detected when you use
# the menu option Options->Reconfigure. You can see their value by looking at
# the file $HOME/.lyx/lyxrc.defaults. Any setting in this file will override
# the defaults.
#
# BIND SECTION ###########################################################
#
# Before defining your own key-bindings, select one of the available default
# binding sets. These are resource files (like this one) that define a
# large set of (keyboard) bindings. These files live in bind directory of
# the LyX system directory and have in general the .bind suffix.
# Currently, you can choose from the following flavors:
#
# cua.bind for Windows-, Mac- and Motif-like bindings
# emacs.bind for Emacs-like bindings.
#
# The \bind_file command looks in the LyX bind directory for a file
# of the given name, but a full path can also be given. If you have
# a bind file in your ~/.lyx/bind/ directory, it will be preferred
# over a system wide bind file. Default is `cua'.
#\bind_file cua
#\bind_file emacs
# Based on the default, you can now change part or all of it with the
# \bind command. For example, when you want the delete key to do the
# backspace action, uncomment the following line:
#\bind "Delete" "delete-backward"
# However, if you're not at all happy with the default bindings,
# the most logical thing to do would be to use one of the system
# wide bind files as a template and place your own version in
# ~/.lyx/bind/mine_is_best.bind and change the above \bind_file
# to this instead:
#\bind_file mine_is_best
# Tip: Use "lyx -dbg 4" to survey how LyX interprets your keybindings.
#
# MISC SECTION ###########################################################
#
# Set this to false if you don't want the startup banner.
# Default is true.
#\show_banner true
# Set to false if you don't want the current selection to be replaced
# automatically by what you type. Default is true.
#\auto_region_delete false
# This is the time interval between auto-saves (in seconds).
# 0 means no auto-save, default is 300 for five minutes.
#\autosave 600
# LyX asks for a second confirmation to exit if you exit with changed
# documents that you don't want to save. You can turn this confirmation off
# (LyX will still ask to save changed documents) with the following line.
# We recommend to keep the confirmation, though.
#\exit_confirmation false
# LyX continously displays names of last command executed, along with a list
# of defined short-cuts for it in the minibuffer.
# It requires some horsepower to function, so you can turn it off, if LyX
# seems slow to you, by uncommenting this line:
#\display_shortcuts false
# Define which program to use to view dvi files here.
# You can include any options you need by "quoting" the entire command.
# The default is "xdvi".
# Example: the next line would use xdvi and display with shrink 2:
#\view_dvi_command "xdvi -s 2"
# It can get more involved. Expert users might prefer something like:
#\view_dvi_command "xdvi -s 2 -expert -geometry 1014x720+0+0 -keep -margins 1.5"
# \view_dvi_paper_option allows to specify a paper option to the dvi
# viewer. By default LyX specifies the paper size of the document to
# the dvi viewer via the command line option -paper size, where size
# is one of "us","letter","a3","a4" and so on. The command
# \view_dvi_paper_option allows the user to overwrite the name of the
# command line flag, i.e. replace -paper with something else. If
# specified and left empty, i.e. \view_dvi_paper_option "", LyX does
# not append the -paper option to the dvi command at all. This case is
# especially useful when viewing your documents on Windows with yap,
# because yap does not allow a command line option for the paper size.
#\view_dvi_paper_option ""
# LyX assumes that the default papersize should be usletter. If this is not
# true for your site, use the next line to specify usletter, legal,
# executive, a3, a4, a5, or b5 as the default papersize.
#\default_papersize "a4"
# Define which program to use to view pdf files here.
# You can include any options you need by "quoting" the entire command
# The default is auto-detected, but you might want to override it.
# Usual values are: xpdf, acroread, gv, ghostscript.
#\view_pdf_command "xpdf"
# Define which program to use to view postscript files here.
# You can include any options you need by "quoting" the entire command
# The default is auto-detected, but you might want to override it.
# It is possible to get nice anti-aliased text (slower, but as nice as
# xdvi) by using something like
#\view_ps_command "ghostview -swap -sDEVICE=x11alpha"
# Define which program to use to full screen view included postscript
# pictures. You can not include any options. The default is auto-detected.
#\view_pspic_command ghostview
# Define which program to use to use as postscript interpreter for included
# images.
# You can not include any options. The default is "gs" if it can be found.
# If you have a slow computer, you should consider turning off the WYSIWYG
# display of includes images, by using this command:
#\ps_command ""
# Define which program to use to run "chktex".
# You should include options that turn different warnings on and off.
# Default is "chktex -n1 -n3 -n6 -n9 -n22 -n25 -n30 -n38"
# Check the ChkTeX documentation for info on what the flags mean.
# Example: use this to ignore warnings about using "\ldots" instead of "..."
#\chktex_command "chktex -n11 -n1 -n3 -n6 -n9 -22 -n25 -n30 -n38"
# Define which program to use to translate latex to HTML.
# You should include options. The default is autodetected: the programs
# checked are tth, latex2html and hevea, and the default command lines
# used are:
#\html_command "tth -t < '$$FName' > '$$OutName'"
#\html_command "latex2html -no_subdir -split 0 -show_section_numbers '$$FName'"
#\html_command "hevea -s '$$FName'"
# The variable name $$FName is replaced with the name of the .tex
# file, and $$OutName is replaced with the name of the html file.
# Example: use this to let math be italic with tth.
#\html_command "tth -t -i < '$$FName' > '$$OutName'"
# Keyboard Mapping. Use this to set the correct mapping file for your
# keyboard, that is if you need one. You'll need one if you for instance
# want to type German documents on an American keyboard. In that case,
# uncomment these three lines:
#\kbmap true
#\kbmap_primary german
#\kbmap_secondary american
# The following keyboards are supported: american, czech, francais,
# french, german, german-2, magyar, magyar-2, portuges, romanian,
# slovak, slovene, transilvanian, turkish and turkish-f. Check
# the lib/kbd directory if you want to write support for your language.
# If you do, please submit it to lyx-devel@lists.lyx.org.
# The Pause button is defined to be a three-way switch between primary
# keyboard, secondary keyboard, and no keyboard mapping with the
# following command. It is useful if you want to write in a language
# not directly supported by your keyboard and you have defined a
# custom keyboard mapping above.
#\bind "Pause" "keymap-toggle"
# This starts the lyxserver. The pipes get an additional extension
# '.in' and '.out'. Only for advanced users.
# \serverpipe "/home/chb/.lyxpipe"
# Which command to use to invoke the reLyX script to convert
# LaTeX files to LyX files. This setting is automatically
# disabled if you do not have the appropriate Perl version
# installed. In that case, the File->Import LaTeX command
# will be disabled. If the reLyX command does work for you,
# you can override that here by uncommenting this line:
#\relyx_command "reLyX"
#
# If it doesn't work, you can disable the command by uncommenting
# this line:
#\relyx_command "none"
#
# SCREEN & FONTS SECTION #################################################
#
# DPI (dots per inch) of your monitor is auto-detected by LyX. If that goes
# wrong, you can override the setting here:
#\screen_dpi 100
# The zoom percentage for screen fonts.
# A setting of 100% will make the fonts roughly the same size as on paper.
# However, since a screen is wider than a piece of paper, the default setting
# is 150%.
#\screen_zoom 100
# LyX offers a faster method for drawing selected text if you uncomment the
# following line. The trick is to invert the color-information. This will
# switch between white and black and give almost random results for
# other colors, so a white background is necessary. Any other settings of
# the background color will be ignored for this reason. This setting
# is useful on monochrome screens and on slow systems. Fast selection
# can cause cosmetic problems with a few broken X servers.
#\fast_selection true
# If you don't like the default background or selection color, you can
# set your own here:
#\background_color white
#\background_color lightyellow
#
# For reference, the defaults are:
#\background_color linen
#\selection_color lightblue
# LyX normally doesn't update the cursor position if you move the scrollbar.
# If you scroll the cursor off the screen and then start typing LyX will
# move you back to where the cursor was. If you'd prefer to always have the
# cursor on screen, bounded by the topmost and bottommost visible lines
# -- much like XEmacs for example -- then uncomment the next line.
#\cursor_follows_scrollbar true
# The screen fonts used to display the text while editing
# The defaults are:
#\screen_font_roman "-*-times"
#\screen_font_sans "-*-helvetica"
#\screen_font_typewriter "-*-courier"
# For some, this font looks better:
#\screen_font_roman "-*-utopia"
# Allow the use of scalable screen fonts? Default is true.
# If you choose "false", LyX will use the closest existing size for a match.
# Use this if the scalable fonts look bad and you have many fixed size fonts.
#\screen_font_scalable false
# Tip: Run lyx as "lyx -dbg 512" to learn which fonts are used.
# The norm for the screen fonts. The default is iso8859-1, which is
# the same as what LaTeX calls latin1.
#\screen_font_encoding iso8859-2
# The font for popups. It is set to
# <font_popup>-*-*-*-?-*-*-*-*-<font_encoding>.
# The default is:
#\screen_font_popup "-*-helvetica-medium-r"
# The font for menus (and groups titles in popups). It is set to
# <font_menu>-*-*-*-?-*-*-*-*-<font_encoding>.
# The default is:
#\screen_font_menu "-*-helvetica-bold-r"
# The font sizes used for calculating the scaling of the screen fonts.
# You should only have to change these if the fonts on your screen look bad,
# in which case you can fine tune the font selection size by size. LyX selects
# font size according to this table, the monitor DPI setting and the current
# zoom setting.
# The format is:
#\screen_font_sizes tiny smallest smaller small normal large larger largest huge huger
#
# This is the default in LyX (exactly what LaTeX does):
#\screen_font_sizes 5.0 7.0 8.0 9.0 10.0 12.0 14.4 17.28 20.74 24.88
#
# TOOLBAR SECTION ########################################################
#
# Setup your favorite Toolbar here:
# Only three commands are allowed inside the begin_toolbar and end_toolbar
# directives:
# \add <action> [<parameter>] adds an icon to the toolbar performing
# "<action> <parameter>"
# Examples:
# \add font-size small
# \add set-emph
#
# \layouts adds the layouts combo-box to the toolbar
#
# \separator adds some spacing to the toolbar
#
# These actions have icons (please give us more :-):
# buffer-open, buffer-close, buffer-print, buffer-write, font-emph,
# font-noun, font-free, footnote-insert, depth-next, copy, cut, paste,
# tex-mode, math-mode, marginpar-insert, figure-insert, table-insert,
# melt, lyx-quit, buffer-export ascii|latex, font-bold, font-sans,
# buffer-typeset, buffer-view, buffer-view-ps, symbol_insert [parameter]
#
# All other lyx commands will get a "unknown" icon.
#
# This is the default toolbar:
#\begin_toolbar
#\layouts
#\add buffer-open
#\add buffer-write
#\add buffer-print
#\separator
#\add cut
#\add copy
#\add paste
#\separator
#\add font-emph
#\add font-noun
#\add font-free
#\separator
#\add footnote-insert
#\add marginpar-insert
#\add depth-next
#\separator
#\add tex-mode
#\add math-mode
#\separator
#\add figure-insert
#\add table-insert
#\end_toolbar
#
# PRINTER SECTION ########################################################
#
# The default printer to print on. If none is specified, LyX will use
# the environment variable PRINTER. If that fails, the default is empty.
#\printer ""
# If you have setup (as we recommend you to do) your print program
# (e.g. dvips) to take advantage of the particularities of the various
# printers you have access to, then you should set the following to
# true. Then LyX will pass the name of the destination printer to your
# print command.
# The default is false, because we have unfortunately to cope with
# people who refuse to take the time to configure their system.
# Note that you will probably have to change \print_spool_command below.
#\print_adapt_output true
# If you don't use dvips, you may specify your favorite print program
# here. See other options at the end of this section to adapt LyX to
# your print program.
#\print_command dvips
# Extra options to pass to printing program after everything
# else, but before the filename of the DVI file to be printed.
#\print_extra_options ""
# When set, this printer option automatically prints to a file
# and then calls a separate print spooling program on that file
# with the given name and arguments.
# This is set by default to 'lp' or 'lpr', depending on what your
# system uses.
# Set this to "" if you have set up dvips so that it sends
# output to the right printer (remember to also use \print_adapt_output).
#\print_spool_command ""
# If you specify a printer name in the print dialog,
# the following argument is prepended along with the printer name
# after the spool command. The default is autodetected, along with
# \print_spool_command determination.
#\print_spool_printerprefix ""
# Other print related options
# The following options are only of interest to people who do not
# use dvips as print command. You may safely skip to the end of this
# section otherwise.
# These specify the options to pass to the printer program to select the
# corresponding features. These default to the options used for the dvips
# program. Look at the man page for your favorite print program to learn
# which options to use.
# Normally you don't need to change this unless you use something other
# than dvips.
#\print_evenpage_flag -B
#\print_oddpage_flag -A
#\print_reverse_flag -r
#\print_landscape_flag "-t landscape"
#\print_pagerange_flag -pp
#\print_copies_flag -c
#\print_collcopies_flag -C
#\print_paper_flag -t
#\print_paper_dimension_flag -T
# Option to pass to the print program to print on a specific printer.
#\print_to_printer -P
# Option to pass to the print program to print to a file.
#\print_to_file -o
# Extension of printer program output file. Usually .ps
#\print_file_extension .ps
# Sample configuration to use with dvilj4 for a HP Laserjet IV (or
# better) printer [provided by Reuben Thomas <rrt@sc3d.org>]:
#\print_command dvilj4
#\print_extra_options -q
#\print_evenpage_flag "-D2 -r"
#\print_oddpage_flag -D1
#\print_reverse_flag -r
#\print_landscape_flag -l
#\print_pagerange_flag -p
#\print_to_file -e
#\print_file_extension .lj
#\print_copies_flag -c
#\print_collcopies_flag -c
#\print_adapt_output false
#
# EXPORT SECTION ########################################################
#
# With this you can send a LyX-Document to a User-defined program. You
# can specify by adding the tag $$FName where the filename should be
# put on the defined command. if no $$FName is specified the file is
# sent in standard input (stdin). There is no default command
# specified. Example:
#\custom_export_command "kghostview $$FName"
#
# A more elaborate example to create pdf files with ps2pdf would be:
#\custom_export_command "ps2pdf '$$FName' `basename '$$FName' .ps_tmp`.pdf"
# This is the default for the type of contents to be sent to the export
# command: possible values are lyx, dvi, tex, ps and ascii.
#\custom_export_format ps
#
# TEX SECTION ###########################################################
#
# LyX tries to auto-detect which command to use to invoke LaTeX(2e).
# If the auto-detection for some reasons fail, you can override it
# here:
#\latex_command latex2e
# The command used to generate pdf files directly from a latex file.
# A program that works in anyother way is not guarantied to work.
#\pdflatex_command pdflatex
# The command used to generate postscript files from pdf files.
#\pdf_to_ps_command pdf2ps
# If to use pdf as native export format instead of dvi. This makes LyX use
# pdflatex, pdf2ps and other utility programs. Default is false.
#\pdf_mode false
# The font encoding used for the LaTeX2e fontenc package.
# T1 is highly recommended for non-English languages. LyX uses T1 as a
# default if you have the ec fonts installed on your system.
#\font_encoding T1
# Choose "default" if T1 doesn't work for you for some reason:
#\font_encoding default
#
# LINUXDOC SECTION #######################################################
#
# If you want to pass extra flags to the LinuxDoc sgml scripts, insert them
# here.
# Example: the next line activates iso-latin1 support:
#\linuxdoc_to_latex_command "sgml2latex -c latin"
# Here you have the command to convert from linuxdoc to html.
# Example: one html file only.
#\linuxdoc_to_html_command "sgml2html -s 0"
# The LinuxDoc to LyX converter
#\linuxdoc_to_lyx_command "sgml2lyx"
#
# DOCBOOK SECTION ########################################################
#
# Command to convert a docbook file to dvi
#\docbook_to_dvi_command "sgmltools -b dvi"
# Command to convert a docbook file to html
#\docbook_to_html_command "sgmltools -b html"
# Command to convert a docbook file to pdf
#\docbook_to_pdf_command ""
#
# FILE SECTION ##########################################################
#
# The default path for your documents.
# Default is $HOME
#\document_path ~/Documents/
# The file where the last-files information should be stored.
# Default is ~/.lyx/lastfiles
#\lastfiles ~/.lyx_lastfiles
# Maximal number of lastfiles. Up to nine can appear in the file menu.
# Default is four.
#\num_lastfiles 9
# Flag telling whether the lastfiles should be checked for existence.
# Files that does not exist are left out of the lastfiles entries.
# Default is true. If you use slow or removable media, such as networks
# or floppy disks, you can speed up the starting time of LyX by disabling
# this feature.
#\check_lastfiles false
# The path that LyX will set when offering you to choose a template.
# Default is (System LyX dir)/templates
#\template_path ~/.lyx/templates
# The path that LyX will use to put temporary TeX outputs.
# Default is /tmp/<unique directory for each instance of LyX>
# containing <unique subdirectory for each buffer>
# If you set it, it will be /directory/<unique subdirectory for each buffer>
# (unless set to /tmp).
#\tempdir_path /usr/tmp
# If you set this flag, LyX will always use a temporary directory
# to put TeX outputs into. It is enabled by default.
# This directory is deleted when you quit LyX.
# You might want to avoid using a temporary directory in several
# cases:
# - LaTeX cannot find some files it needs;
# - you have a large number of include files, and you get messages
# saying that some LaTeX buffers overflow.
# Note that, even if tell LyX not to use a temporary directory, there
# will be cases where it will be forced to: this happens for example
# when typesetting a file in a read-only directory (documentation).
#\use_tempdir false
# This is the maximum line length of an exported ASCII file (LaTeX,
# SGML or plain text). Default is 75.
#\ascii_linelen 80
# Set to false if you don't want LyX to create backup files.
# Default is true.
#\make_backup true
# The path for storing backup files. If it is the empty string, LyX will
# store the backup file in the same directory of the original file.
# Default is "".
#\backupdir_path "~/Desktop/Trash/"
#
# FAX SECTION #############################################################
#
# In the following, the <$$something> strings are substituted by
# reasonable values by LyX. The 's are important as there may be spaces in
# the string. The default is auto-detected.
# This one is what is used with HylaFax:
#\fax_command "sendfax -n -h '$$Host' -c '$$Comment' -x '$$Enterprise' -d '$$Name'@'$$Phone' '$$FName'"
# Use this for the efax-command:
#\fax_command "faxsend '$$Phone' '$$FName'"
# This is the name of your phone book. It's per default situated in ~/.lyx/,
# but you can override that with an absolute path.
#\phone_book phonebook
# This is how to call an external FAX-program instead of the built-in.
# You may also insert $$FName to reference the PostScript file.
#\fax_program "myfaxprg '$$FName'"
#\fax_program tkhylafax
#
# ASCII EXPORT SECTION ###################################################
#
# The following entry can be used to define an external program to
# render tables in the ASCII output. If you specify "none", a simple
# internal routine is used. The default is auto-detected.
# The following line will use groff and output using latin-1 encoding
# (here $$FName is the input file and the output goes to stdout):
#\ascii_roff_command "groff -t -Tlatin1 $$FName"
#
# SPELLCHECKER SECTION ####################################################
#
# What command runs the spell checker? Default is "ispell" if it is
# installed, "none" otherwise.
# If you have aspell (http://metalab.unc.edu/kevina/aspell/)
# installed and configured, you might want to uncomment the line below.
#\spell_command aspell
# Consider run-together words, such as "notthe" for "not the", as legal
# words? Default is false.
#\accept_compound true
# Specify an alternate language. The default is to use the language of
# document. Uncomment both to enable.
#\use_alt_language true
#\alternate_language dansk
# Specify additional chars that can be part of a word.
#\use_escape_chars true
#\escape_chars "<22><><EFBFBD><EFBFBD><EFBFBD><EFBFBD>"
# Specify an alternate personal dictionary file. If the file name does not
# begin with "/", $HOME is prefixed. The default is to search for a personal
# dictionary in both the current directory and $HOME, creating one in $HOME
# if none is found. The preferred name is constructed by appending ".ispell_"
# to the base name of the hash file. For example, if you use the English
# dictionary, your personal dictionary would be named ".ispell_english".
#\use_personal_dictionary true
#\personal_dictionary .ispell_dansk
# Specify whether to pass the -T input encoding option to ispell (only if the
# language is different than "default".) Enable this if you can't spellcheck
# words with international letters in them. There have been reports that this
# does not work with all dictionaries, so this is disabled by default.
#\use_input_encoding true
# Default format string for the date-insert command
#
# This accepts the normal strftime formats; see man strftime for full
# details of the format.
#
#\date_insert_format "%A, %e. %B %Y"
#
# LANGUAGE SUPPORT SECTION ####################################################
#
# Set to true to enable support of right-to-left languages (e.g. Hebrew,
# Arabic). Default is false.
#\rtl true
# If number_inset is set to "true", each time a digit key is pressed,
# LyX will automatically open a new number inset.
# If number_inset is set to "rtl", the above behavior will take place
# only when the cursor is on right-to-left text.
# Default is rtl.
#\number_inset true
# The latex command for loading the language package.
# Default is \usepackage{babel}.
#\language_package "\usepackage{omega}"
# The latex command for changing the from the language of the document
# to another language. $$lang is substituted by the name of the second
# language. Default is \selectlanguage{$$lang}.
#\language_command_begin "\begin{otherlanguage}{$$lang}"
# The latex command for changing back the language to the language of
# the document. Default is \selectlanguage{$$lang}.
#\language_command_end "\end{otherlanguage}"
# Set to false if a language switching command is needed at the beginning of
# the document. Default is true.
#\language_auto_begin false
# Set to false if a language switching command is needed at the end of
# the document. Default is true.
#\language_auto_end false
#
# HEBREW SUPPORT SECTION ####################################################
#
# To enable the Hebrew support, uncommnet the following lines:
#\rtl true
#\kbmap true
#\kbmap_primary null
#\kbmap_secondary hebrew
#\latex_command elatex
#\font_encoding default
#\number_inset rtl
# You also need to bind a key for switching between Hebrew and English.
# For example,
#\bind "F12" "language hebrew"
# Finally, you need to select iso8859-8 font encoding, and select screen fonts
# (below are the default fonts. You need to replace them by Hebrew fonts)
#\screen_font_encoding iso8859-8
#\screen_font_roman "-*-times"
#\screen_font_sans "-*-helvetica"
#\screen_font_typewriter "-*-courier"
#\screen_font_popup "-*-helvetica-medium-r"
#\screen_font_menu "-*-helvetica-bold-r"
#
# ARABIC SUPPORT SECTION ####################################################
#
# To enable the Arabic support, uncommnet the following lines:
#\rtl true
#\kbmap true
#\kbmap_primary null
#\kbmap_secondary arabic
#\number_inset false
# You also need to bind a key for switching between Arabic and English.
# For example,
#\bind "F12" "language arabic"
# If you use arabtex, uncomment the following lines
#\language_auto_begin false
#\language_auto_end false
#\language_command_begin "\begin{arabtext}"
#\language_command_end "\end{arabtext}"
#\language_package "\usepackage{arabtex,iso88596}\setcode{iso8859-6}"
# Finally, you need to select iso8859-6.8x font encoding,
# and select screen fonts.
# iso8859-6.8x fonts can be found at
# http://www.langbox.com/AraMosaic/mozilla/fontXFE/
#\screen_font_encoding iso8859-6.8x
#\screen_font_encoding_menu iso8859-1
#\screen_font_roman "-*-naskhi"