Clippy improvements, some comments added, etc.

src/daq/api/api_cpal.rs

@@ -96,7 +96,7 @@ impl CpalApi {
             let mut oChannelCount = 0;
 
             let mut avSampleRates = srs_tot.clone();
-            let mut avFramesPerBlock = vec![256 as usize, 512, 1024, 2048, 8192];
+            let mut avFramesPerBlock = vec![256_usize, 512, 1024, 2048, 8192];
 
             let mut sample_formats = vec![];
             // Search for sample formats
@@ -134,7 +134,7 @@ impl CpalApi {
                 }
             }
             sample_formats.dedup();
-            if sample_formats.len() == 0 {
+            if sample_formats.is_empty() {
                 continue;
             }
 
@@ -177,7 +177,8 @@ impl CpalApi {
         send_ch: Option<Sender<RawStreamData>>,
         status: Arc<AtomicCell<StreamStatus>>,
     ) -> impl FnMut(cpal::StreamError) {
-        let errfn = move |err: cpal::StreamError| {
+        
+        move |err: cpal::StreamError| {
             let serr = match err {
                 cpal::StreamError::DeviceNotAvailable => StreamError::DeviceNotAvailable,
                 cpal::StreamError::BackendSpecific { err: _ } => StreamError::DriverError,
@@ -186,8 +187,7 @@ impl CpalApi {
                 sender.send(RawStreamData::StreamError(serr)).unwrap();
             }
             status.store(StreamStatus::Error(serr));
-        };
-        errfn
+        }
     }
 
     fn create_incallback<T>(
@@ -435,14 +435,14 @@ impl CpalApi {
             let supported_config = match stype {
                 StreamType::Duplex => bail!("Duplex stream not supported for CPAL"),
                 StreamType::Input => CpalApi::create_cpal_config(
-                    stype.clone(),
+                    stype,
                     devinfo,
                     conf,
                     &cpaldev,
                     cpaldev.supported_input_configs()?,
                 ),
                 StreamType::Output => CpalApi::create_cpal_config(
-                    stype.clone(),
+                    stype,
                     devinfo,
                     conf,
                     &cpaldev,
@@ -610,7 +610,7 @@ impl CpalApi {
     // Create an output stream, using given signal generators for each channel.
     // }
 
-    pub fn startOutputStream(&self, rx: Receiver<RawStreamData>) -> Result<Box<dyn Stream>> {
+    pub fn startOutputStream(&self, _rx: Receiver<RawStreamData>) -> Result<Box<dyn Stream>> {
         bail!("Not implemented");
     }
 }

src/daq/daqconfig.rs

@@ -154,7 +154,7 @@ impl DaqConfig {
     ///
     /// * st: string containing TOML data.
     pub fn deserialize_TOML_str(st: &String) -> Result<DaqConfig> {
-        let res: DaqConfig = toml::from_str(&st)?;
+        let res: DaqConfig = toml::from_str(st)?;
         Ok(res)
     }
 

src/daq/record.rs

@@ -1,21 +1,21 @@
 use super::*;
 use crate::config::Flt;
 use anyhow::{bail, Error, Result};
+use clap::builder::OsStr;
 use crossbeam::atomic::AtomicCell;
 use hdf5::types::{VarLenArray, VarLenUnicode};
 use hdf5::{dataset, datatype, Dataset, File, H5Type};
 use ndarray::ArrayView2;
-use clap::builder::OsStr;
 use std::path::{Path, PathBuf};
 use std::str::FromStr;
 use std::sync::atomic::{AtomicBool, Ordering::SeqCst};
 use std::sync::{Arc, Mutex};
 use std::thread::{spawn, JoinHandle};
 use std::time::Duration;
-use strum::EnumMessage;
+use streamdata::*;
 use streammgr::*;
 use streammsg::InStreamMsg;
-use streamdata::*;
+use strum::EnumMessage;
 
 #[derive(Clone, Debug)]
 /// Status of a recording
@@ -51,19 +51,48 @@ pub struct RecordSettings {
     /// The delay to wait before adding data
     pub startDelay: Duration,
 }
+impl RecordSettings {
+    /// Create new record settings. Convenience wrapper to fill in fields in
+    /// right form. Start delay is optional
+    ///
+    /// * args:
+    ///     filename: Name of file to record to
+    ///     duration: How long recording should be. Zero means record indefinitely.
+    ///     startDelay: Optional start delay.
+    pub fn new<T, U>(filename: T, duration: U, startDelay: Option<U>) -> RecordSettings
+    where
+        T: Into<PathBuf>,
+        U: Into<Duration> + Default,
+    {
+        RecordSettings {
+            filename: filename.into(),
+            duration: duration.into(),
+            startDelay: startDelay
+                .map(|s| s.into())
+                .unwrap_or_else(|| Duration::ZERO),
+        }
+    }
+}
 
 /// This struct lets a recording run on a stream, waits till the first data arrives and records for a given period of time. Usage:
 ///
 /// ```
 /// use lasprs::{RecordSettings, StreamMgr, Recording};
 /// use std::time::Duration;
-/// let smgr = StreamMgr::new();
+///
+/// fn main() -> anyhow::Result<()> {
+/// let mut smgr = StreamMgr::new();
 /// smgr.startDefaultInputStream()?;
-/// let settings = RecordSettings{
-/// filename: "test.h5",
-/// duration: Duration::from_secs(5),
-/// };
-/// let rec = Recording::new(settings)?;
+///
+/// // Create record settings
+/// let settings = RecordSettings::new(
+///  "test.h5",
+///  Duration::from_millis(100),
+///  None,
+/// );
+/// let rec = Recording::new(settings, &mut smgr)?;
+/// Ok(())
+/// }
 /// ```
 pub struct Recording {
     settings: RecordSettings,
@@ -82,7 +111,7 @@ impl Recording {
     where
         T: H5Type,
     {
-        let bs = meta.framesPerBlock as usize;
+        let bs = meta.framesPerBlock;
         let nch = meta.nchannels();
         match file
             .new_dataset::<T>()
@@ -169,7 +198,7 @@ impl Recording {
     pub fn new(mut settings: RecordSettings, mgr: &mut StreamMgr) -> Result<Recording> {
         // Append extension if not yet there
         match settings.filename.extension() {
-            Some(a) if a == OsStr::from("h5") => {}
+            Some(a) if a == "h5" => {}
             None | Some(_) => {
                 settings.filename =
                     (settings.filename.to_string_lossy().to_string() + ".h5").into();
@@ -428,7 +457,7 @@ impl Recording {
 
 impl Drop for Recording {
     fn drop(&mut self) {
-        if let Some(_) = &self.handle {
+        if self.handle.is_some() {
             // If we enter here, stop() or cancel() has not been called. In that
             // case, we cleanup here by cancelling the recording
             self.cancel();

src/daq/streamdata.rs

@@ -38,7 +38,7 @@ pub enum RawStreamData {
 }
 
 impl RawStreamData {
-    pub fn toFloat(&self, nchannels: usize) -> Dmat {
+    pub fn toFloat(&self, _nchannels: usize) -> Dmat {
         // match &self {
         //     RawStreamData::Datai8(c) => {
         //         Dmat::zeros((2, 2));

src/daq/streamhandler.rs

@@ -16,4 +16,4 @@ impl StreamHandler {
         smgr.addInQueue(tx);
         StreamHandler{rx}
     }
-}
+}

src/daq/streammgr.rs

@@ -5,9 +5,6 @@ use crate::{
     config::*,
     siggen::{self, Siggen},
 };
-use streamcmd::StreamCommand;
-use streammsg::*;
-use streamdata::*;
 use anyhow::{bail, Error, Result};
 use array_init::from_iter;
 use core::time;
@@ -18,6 +15,9 @@ use crossbeam::{
 };
 use std::sync::{atomic::AtomicBool, Arc, Mutex};
 use std::thread::{JoinHandle, Thread};
+use streamcmd::StreamCommand;
+use streamdata::*;
+use streammsg::*;
 
 #[cfg(feature = "cpal-api")]
 use super::api::api_cpal::CpalApi;
@@ -90,6 +90,12 @@ impl StreamMgr {
     // }
     // #[pyo3(name = "firstOrderHighPass")]
 }
+impl Default for StreamMgr {
+    fn default() -> Self {
+        Self::new()
+    }
+}
+
 impl StreamMgr {
     /// Create new stream manager. A stream manager is supposed to be a singleton.
     ///
@@ -116,7 +122,7 @@ impl StreamMgr {
         smgr.devs = smgr.scanDeviceInfo();
         smgr
     }
-    
+
     /// Get stream status for given stream type.
     pub fn getStatus(&self, t: StreamType) -> StreamStatus {
         match t {
@@ -181,7 +187,12 @@ impl StreamMgr {
         devinfo
     }
 
-    /// Add a new queue to the lists of queues
+    /// Add a new queue to the lists of queues. On the queue, input data is
+    /// added.
+    /// 
+    /// If the stream is unable to write data on the queue (which might
+    /// happen when the handler is dropped), the queue is removed from the list
+    /// of queues that get data from the stream.
     pub fn addInQueue(&mut self, tx: Sender<InStreamMsg>) {
         if let Some(is) = &self.input_stream {
             is.comm.send(StreamCommand::AddInQueue(tx)).unwrap()
@@ -249,14 +260,9 @@ impl StreamMgr {
 
     // Match device info struct on given daq config.
     fn match_devinfo(&self, cfg: &DaqConfig) -> Option<&DeviceInfo> {
-        for d in self.devs.iter() {
-            if d.device_name == cfg.device_name {
-                return Some(d);
-            }
-        }
-        None
+        self.devs.iter().find(|&d| d.device_name == cfg.device_name)
     }
-    fn startOuputStreamThread<T>(
+    fn startOuputStreamThread(
         &mut self,
         meta: Arc<StreamMetaData>,
         tx: Sender<RawStreamData>,
@@ -483,7 +489,7 @@ impl StreamMgr {
         let (tx, rx)= unbounded();
         let stream = self.cpal_api.startDefaultOutputStream(rx)?;
         let meta = stream.metadata();
-        let (threadhandle, commtx) = self.startOuputStreamThread::<u16>(meta, tx);
+        let (threadhandle, commtx) = self.startOuputStreamThread(meta, tx);
                 // Inform all listeners of new stream data
 
 
@@ -532,7 +538,9 @@ impl StreamMgr {
             comm,
         }) = self.output_stream.take()
         {
-            if let Err(_) = comm.send(StreamCommand::StopThread){
+            if comm.send(StreamCommand::StopThread).is_err() {
+                // Failed to send command over channel. This means the thread is
+                // already finished due to some other reason.
                 assert!(threadhandle.is_finished());
             }
             // println!("Wainting for threadhandle to join...");

src/filter.rs

@@ -168,7 +168,7 @@ impl Filter for Biquad {
         self.w2 = 0.;
     }
     fn clone_dyn(&self) -> Box<dyn Filter> {
-        Box::new(self.clone())
+        Box::new(*self)
     }
 }
 
@@ -191,7 +191,7 @@ impl SeriesBiquad {
     /// Create new series filter set. See [SeriesBiquad::new()]
     ///
     pub fn new_py<'py>(coefs: PyReadonlyArrayDyn<Flt>) -> PyResult<Self> {
-        Ok(SeriesBiquad::new(&coefs.as_slice()?)?)
+        Ok(SeriesBiquad::new(coefs.as_slice()?)?)
     }
     #[pyo3(name = "unit")]
     #[staticmethod]

src/lib.rs

@@ -18,6 +18,7 @@ pub mod daq;
 pub mod siggen;
 
 pub use config::*;
+pub use daq::*;
 
 cfg_if::cfg_if! {
 if #[cfg(feature = "python-bindings")] {
@@ -32,7 +33,7 @@ if #[cfg(feature = "python-bindings")] {
 #[pyo3(name="_lasprs")]
 fn lasprs(py: Python, m: &PyModule) -> PyResult<()> {
 
-    pyo3_add_submodule_filter(py, &m)?;
+    pyo3_add_submodule_filter(py, m)?;
     Ok(())
 }
 

src/siggen.rs

@@ -352,7 +352,7 @@ impl SiggenChannelConfig {
         } else {
             result.copy_from_slice(source);
             if let Some(f) = &mut self.prefilter {
-                f.filter(&result);
+                f.filter(result);
             }
         }
         result.iter_mut().for_each(|x| {
@@ -428,7 +428,7 @@ mod test {
     fn test_sample() {
         assert_eq!(0.5f32.to_sample::<i8>(), 64);
         assert_eq!(1.0f32.to_sample::<i8>(), 127);
-        assert_eq!(-1.0f32.to_sample::<i8>(), -127);
+        assert_eq!(-(1.0f32.to_sample::<i8>()), -127);
         assert_eq!(1.0f32.to_sample::<i16>(), i16::MAX);
     }
 }