This is one of a series of patches that will merge the layout modules development in personal/branches/rgheck back into the tree.
Design goal: Allow the use of layout "modules", which are to LaTeX packages as layout files are to LaTeX document classes. Thus, one could have a module that defined certain character styles, environments, commands, or what have you, and include it in various documents, each of which uses a different document class, without having to modify the layout files themselves. For example, a theorems.module could be used with article.layout to provide support for theorem-type environments, without having to modify article.layout itself, and the same module could be used with book.layout, etc.
This third patch just re-factors some code presently in QCitation*. (It also incorporates some bug fixes that have been committed separately.) We're going to use essentially the same set of widgets for choosing modules that is used for choosing citation keys, so we pull the controlling logic out into a new class, QSelectionManager. I did not make this a QWidget. That seemed to me to be overkill, and it would have made things much more complicated, I think...and I'm not all that experienced with Qt, anyway. Anyone who wants to do that is of course welcome.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@19860 a592a061-630c-0410-9148-cb99ea01b6c8
2007-08-28 16:49:40 +00:00
|
|
|
/**
|
2007-08-31 05:53:55 +00:00
|
|
|
* \file GuiSelectionManager.h
|
This is one of a series of patches that will merge the layout modules development in personal/branches/rgheck back into the tree.
Design goal: Allow the use of layout "modules", which are to LaTeX packages as layout files are to LaTeX document classes. Thus, one could have a module that defined certain character styles, environments, commands, or what have you, and include it in various documents, each of which uses a different document class, without having to modify the layout files themselves. For example, a theorems.module could be used with article.layout to provide support for theorem-type environments, without having to modify article.layout itself, and the same module could be used with book.layout, etc.
This third patch just re-factors some code presently in QCitation*. (It also incorporates some bug fixes that have been committed separately.) We're going to use essentially the same set of widgets for choosing modules that is used for choosing citation keys, so we pull the controlling logic out into a new class, QSelectionManager. I did not make this a QWidget. That seemed to me to be overkill, and it would have made things much more complicated, I think...and I'm not all that experienced with Qt, anyway. Anyone who wants to do that is of course welcome.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@19860 a592a061-630c-0410-9148-cb99ea01b6c8
2007-08-28 16:49:40 +00:00
|
|
|
* This file is part of LyX, the document processor.
|
|
|
|
* Licence details can be found in the file COPYING.
|
|
|
|
*
|
|
|
|
* \author Richard Heck
|
|
|
|
* \author Et Alia
|
|
|
|
*
|
|
|
|
* Full author contact details are available in file CREDITS.
|
|
|
|
*/
|
|
|
|
|
2007-09-05 20:33:29 +00:00
|
|
|
#ifndef GUISELECTIONMANAGER_H
|
|
|
|
#define GUISELECTIONMANAGER_H
|
This is one of a series of patches that will merge the layout modules development in personal/branches/rgheck back into the tree.
Design goal: Allow the use of layout "modules", which are to LaTeX packages as layout files are to LaTeX document classes. Thus, one could have a module that defined certain character styles, environments, commands, or what have you, and include it in various documents, each of which uses a different document class, without having to modify the layout files themselves. For example, a theorems.module could be used with article.layout to provide support for theorem-type environments, without having to modify article.layout itself, and the same module could be used with book.layout, etc.
This third patch just re-factors some code presently in QCitation*. (It also incorporates some bug fixes that have been committed separately.) We're going to use essentially the same set of widgets for choosing modules that is used for choosing citation keys, so we pull the controlling logic out into a new class, QSelectionManager. I did not make this a QWidget. That seemed to me to be overkill, and it would have made things much more complicated, I think...and I'm not all that experienced with Qt, anyway. Anyone who wants to do that is of course welcome.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@19860 a592a061-630c-0410-9148-cb99ea01b6c8
2007-08-28 16:49:40 +00:00
|
|
|
|
|
|
|
#include <QObject>
|
This commit changes the way individual LyXModule's are represented, both internally and in the .lyx files. The earlier version represented them by their `descriptive name', e.g., "Endnote" or "Theorems (AMS)", these being the same names used in the UI. This was a mistake, as becomes readily apparent when one starts to think about translating these strings. The modules ought to be represented by their filename, without the extension, just as TextClass's are.
The changes that accomplish this part are in ModuleList.{h,cpp}, configure.py, and the *.module files themselves. This is a format change, and the lyx2lyx is in those files.
By itself, that change would not be major, except for the fact that we do not want the module to be represented in the UI by its filename---e.g., theorems-std---but rather by a descriptive name, such as "Theorems". But that change turns out to be wholly non-trivial. The mechanism for choosing modules was the same as---indeed, was borrowed from---that in GuiCitation: You get a list of modules, and choosing them involves moving strings from one QListView to another. The models underlying these views are just QStringListModels, which means that, when you want to know what modules have been selected, you see what strings are in the "selected" QListView. But these are just the descriptive names, and we can't look up a module by its descriptive name if it's been translated. That, indeed, was the whole point of the change to the new representation.
So, we need a more complicated model underlying the QListView, one that will pair an identifying string---the filename minus the extension, in this case---with each item. This turns out not to be terribly difficult, though it took rather a while for me to understand why it's not difficult. There are two parts:
(i) GuiSelectionManger gets re-written to use any QAbstractListModel, not just a QStringListModel. This actually seems to improve the code, independently.
(ii) We then subclass QAbstractListModel to get the associated ID string, using the Qt::UserRole slot associated with each item to store its ID. This would be almost completely trivial if QAbstractListItem::itemData() included the QVariant associated with this role, but it doesn't, so there are some additional hoops through which to jump.
The new model, a GuiIdListModel, is defined in the files by that name. The changes in GuiSelectionManger.{h,cpp} make it more abstract; the changes in GuiDocument.{h,cpp} adapt it to the new framework.
I've also updated the module documenation to accord with this change.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@22501 a592a061-630c-0410-9148-cb99ea01b6c8
2008-01-12 04:28:12 +00:00
|
|
|
|
2008-09-20 13:44:51 +00:00
|
|
|
class QAbstractListModel;
|
|
|
|
class QModelIndex;
|
|
|
|
class QListView;
|
|
|
|
class QPushButton;
|
|
|
|
class QVariant;
|
2009-08-14 20:37:12 +00:00
|
|
|
class QAbstractItemView;
|
2010-03-24 13:51:47 +00:00
|
|
|
class QItemSelection;
|
2008-09-20 13:44:51 +00:00
|
|
|
template <class T, class U> class QMap;
|
This commit changes the way individual LyXModule's are represented, both internally and in the .lyx files. The earlier version represented them by their `descriptive name', e.g., "Endnote" or "Theorems (AMS)", these being the same names used in the UI. This was a mistake, as becomes readily apparent when one starts to think about translating these strings. The modules ought to be represented by their filename, without the extension, just as TextClass's are.
The changes that accomplish this part are in ModuleList.{h,cpp}, configure.py, and the *.module files themselves. This is a format change, and the lyx2lyx is in those files.
By itself, that change would not be major, except for the fact that we do not want the module to be represented in the UI by its filename---e.g., theorems-std---but rather by a descriptive name, such as "Theorems". But that change turns out to be wholly non-trivial. The mechanism for choosing modules was the same as---indeed, was borrowed from---that in GuiCitation: You get a list of modules, and choosing them involves moving strings from one QListView to another. The models underlying these views are just QStringListModels, which means that, when you want to know what modules have been selected, you see what strings are in the "selected" QListView. But these are just the descriptive names, and we can't look up a module by its descriptive name if it's been translated. That, indeed, was the whole point of the change to the new representation.
So, we need a more complicated model underlying the QListView, one that will pair an identifying string---the filename minus the extension, in this case---with each item. This turns out not to be terribly difficult, though it took rather a while for me to understand why it's not difficult. There are two parts:
(i) GuiSelectionManger gets re-written to use any QAbstractListModel, not just a QStringListModel. This actually seems to improve the code, independently.
(ii) We then subclass QAbstractListModel to get the associated ID string, using the Qt::UserRole slot associated with each item to store its ID. This would be almost completely trivial if QAbstractListItem::itemData() included the QVariant associated with this role, but it doesn't, so there are some additional hoops through which to jump.
The new model, a GuiIdListModel, is defined in the files by that name. The changes in GuiSelectionManger.{h,cpp} make it more abstract; the changes in GuiDocument.{h,cpp} adapt it to the new framework.
I've also updated the module documenation to accord with this change.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@22501 a592a061-630c-0410-9148-cb99ea01b6c8
2008-01-12 04:28:12 +00:00
|
|
|
|
This is one of a series of patches that will merge the layout modules development in personal/branches/rgheck back into the tree.
Design goal: Allow the use of layout "modules", which are to LaTeX packages as layout files are to LaTeX document classes. Thus, one could have a module that defined certain character styles, environments, commands, or what have you, and include it in various documents, each of which uses a different document class, without having to modify the layout files themselves. For example, a theorems.module could be used with article.layout to provide support for theorem-type environments, without having to modify article.layout itself, and the same module could be used with book.layout, etc.
This third patch just re-factors some code presently in QCitation*. (It also incorporates some bug fixes that have been committed separately.) We're going to use essentially the same set of widgets for choosing modules that is used for choosing citation keys, so we pull the controlling logic out into a new class, QSelectionManager. I did not make this a QWidget. That seemed to me to be overkill, and it would have made things much more complicated, I think...and I'm not all that experienced with Qt, anyway. Anyone who wants to do that is of course welcome.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@19860 a592a061-630c-0410-9148-cb99ea01b6c8
2007-08-28 16:49:40 +00:00
|
|
|
namespace lyx {
|
|
|
|
namespace frontend {
|
|
|
|
|
|
|
|
/** Class to manage a collection of widgets that allows selection
|
|
|
|
* of items from a list of available items. Adapted from code originally
|
2007-08-31 05:53:55 +00:00
|
|
|
* written for GuiCitationDialog.
|
This is one of a series of patches that will merge the layout modules development in personal/branches/rgheck back into the tree.
Design goal: Allow the use of layout "modules", which are to LaTeX packages as layout files are to LaTeX document classes. Thus, one could have a module that defined certain character styles, environments, commands, or what have you, and include it in various documents, each of which uses a different document class, without having to modify the layout files themselves. For example, a theorems.module could be used with article.layout to provide support for theorem-type environments, without having to modify article.layout itself, and the same module could be used with book.layout, etc.
This third patch just re-factors some code presently in QCitation*. (It also incorporates some bug fixes that have been committed separately.) We're going to use essentially the same set of widgets for choosing modules that is used for choosing citation keys, so we pull the controlling logic out into a new class, QSelectionManager. I did not make this a QWidget. That seemed to me to be overkill, and it would have made things much more complicated, I think...and I'm not all that experienced with Qt, anyway. Anyone who wants to do that is of course welcome.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@19860 a592a061-630c-0410-9148-cb99ea01b6c8
2007-08-28 16:49:40 +00:00
|
|
|
* Note that this is a not a QWidget, though it could be converted to
|
|
|
|
* one. Rather, the managed widgets---see constructor for descripton
|
|
|
|
* of them---should be created independently, and then passed to the
|
|
|
|
* constructor.
|
|
|
|
*/
|
2007-09-05 20:33:29 +00:00
|
|
|
class GuiSelectionManager : public QObject
|
|
|
|
{
|
2008-09-20 13:44:51 +00:00
|
|
|
Q_OBJECT
|
2007-09-05 20:33:29 +00:00
|
|
|
|
|
|
|
public:
|
|
|
|
///
|
|
|
|
GuiSelectionManager(
|
2009-08-14 20:37:12 +00:00
|
|
|
QAbstractItemView * availableLV,
|
2007-09-05 20:33:29 +00:00
|
|
|
QListView * selectedLV,
|
|
|
|
QPushButton * addPB,
|
|
|
|
QPushButton * delPB,
|
|
|
|
QPushButton * upPB,
|
|
|
|
QPushButton * downPB,
|
This commit changes the way individual LyXModule's are represented, both internally and in the .lyx files. The earlier version represented them by their `descriptive name', e.g., "Endnote" or "Theorems (AMS)", these being the same names used in the UI. This was a mistake, as becomes readily apparent when one starts to think about translating these strings. The modules ought to be represented by their filename, without the extension, just as TextClass's are.
The changes that accomplish this part are in ModuleList.{h,cpp}, configure.py, and the *.module files themselves. This is a format change, and the lyx2lyx is in those files.
By itself, that change would not be major, except for the fact that we do not want the module to be represented in the UI by its filename---e.g., theorems-std---but rather by a descriptive name, such as "Theorems". But that change turns out to be wholly non-trivial. The mechanism for choosing modules was the same as---indeed, was borrowed from---that in GuiCitation: You get a list of modules, and choosing them involves moving strings from one QListView to another. The models underlying these views are just QStringListModels, which means that, when you want to know what modules have been selected, you see what strings are in the "selected" QListView. But these are just the descriptive names, and we can't look up a module by its descriptive name if it's been translated. That, indeed, was the whole point of the change to the new representation.
So, we need a more complicated model underlying the QListView, one that will pair an identifying string---the filename minus the extension, in this case---with each item. This turns out not to be terribly difficult, though it took rather a while for me to understand why it's not difficult. There are two parts:
(i) GuiSelectionManger gets re-written to use any QAbstractListModel, not just a QStringListModel. This actually seems to improve the code, independently.
(ii) We then subclass QAbstractListModel to get the associated ID string, using the Qt::UserRole slot associated with each item to store its ID. This would be almost completely trivial if QAbstractListItem::itemData() included the QVariant associated with this role, but it doesn't, so there are some additional hoops through which to jump.
The new model, a GuiIdListModel, is defined in the files by that name. The changes in GuiSelectionManger.{h,cpp} make it more abstract; the changes in GuiDocument.{h,cpp} adapt it to the new framework.
I've also updated the module documenation to accord with this change.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@22501 a592a061-630c-0410-9148-cb99ea01b6c8
2008-01-12 04:28:12 +00:00
|
|
|
QAbstractListModel * availableModel,
|
|
|
|
QAbstractListModel * selectedModel);
|
2007-09-05 20:33:29 +00:00
|
|
|
/// Sets the state of the various push buttons, depending upon the
|
|
|
|
/// state of the widgets. (E.g., "delete" is enabled only if the
|
|
|
|
/// selection is non-empty.)
|
2008-01-09 18:51:02 +00:00
|
|
|
/// Note: this is separated out into updateAddPB(), etc, below,
|
|
|
|
/// for easy over-riding of these functions.
|
2007-09-15 01:53:26 +00:00
|
|
|
void update();
|
2007-09-05 20:33:29 +00:00
|
|
|
|
|
|
|
/// Not strictly a matter of focus, which may be elsewhere, but
|
|
|
|
/// whether selectedLV is `more focused' than availableLV. Intended
|
|
|
|
/// to be used, for example, in displaying information about a
|
|
|
|
/// highlighted item: should it be the highlighted available item
|
|
|
|
/// or the highlighted selected item that is displayed?
|
2013-05-12 11:00:02 +00:00
|
|
|
bool selectedFocused() const { return selectedHasFocus_; }
|
2010-03-24 12:04:24 +00:00
|
|
|
/// Returns the selected index. Note that this will depend upon
|
|
|
|
/// selectedFocused().
|
|
|
|
QModelIndex getSelectedIndex() const;
|
This is one of a series of patches that will merge the layout modules development in personal/branches/rgheck back into the tree.
Design goal: Allow the use of layout "modules", which are to LaTeX packages as layout files are to LaTeX document classes. Thus, one could have a module that defined certain character styles, environments, commands, or what have you, and include it in various documents, each of which uses a different document class, without having to modify the layout files themselves. For example, a theorems.module could be used with article.layout to provide support for theorem-type environments, without having to modify article.layout itself, and the same module could be used with book.layout, etc.
This third patch just re-factors some code presently in QCitation*. (It also incorporates some bug fixes that have been committed separately.) We're going to use essentially the same set of widgets for choosing modules that is used for choosing citation keys, so we pull the controlling logic out into a new class, QSelectionManager. I did not make this a QWidget. That seemed to me to be overkill, and it would have made things much more complicated, I think...and I'm not all that experienced with Qt, anyway. Anyone who wants to do that is of course welcome.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@19860 a592a061-630c-0410-9148-cb99ea01b6c8
2007-08-28 16:49:40 +00:00
|
|
|
|
2007-09-05 20:33:29 +00:00
|
|
|
Q_SIGNALS:
|
2008-09-20 13:44:51 +00:00
|
|
|
/// Emitted when the list of selected items has changed.
|
2007-09-05 20:33:29 +00:00
|
|
|
void selectionChanged();
|
2008-09-20 13:44:51 +00:00
|
|
|
/// Emitted when something has changed that might lead the containing
|
|
|
|
/// dialog to want to update---the focused subwidget or selected item.
|
|
|
|
/// (Specifically, it is emitted by *_PB_clicked() and *_LV_clicked.)
|
|
|
|
/// NOTE: No automatic update of the button state is done here. If you
|
|
|
|
/// just want to do that, connect updateHook() to updateView(). Much of the
|
|
|
|
/// time, though, you will want to do a bit more processing first, so
|
|
|
|
/// you can connect to some other function that itself calls updateView().
|
2007-09-05 20:33:29 +00:00
|
|
|
void updateHook();
|
2008-09-20 13:44:51 +00:00
|
|
|
/// Emitted on Ctrl-Enter in the availableLV. Intended to be connected
|
|
|
|
/// to an "OK" event in the parent dialog.
|
2007-09-05 20:33:29 +00:00
|
|
|
void okHook();
|
This is one of a series of patches that will merge the layout modules development in personal/branches/rgheck back into the tree.
Design goal: Allow the use of layout "modules", which are to LaTeX packages as layout files are to LaTeX document classes. Thus, one could have a module that defined certain character styles, environments, commands, or what have you, and include it in various documents, each of which uses a different document class, without having to modify the layout files themselves. For example, a theorems.module could be used with article.layout to provide support for theorem-type environments, without having to modify article.layout itself, and the same module could be used with book.layout, etc.
This third patch just re-factors some code presently in QCitation*. (It also incorporates some bug fixes that have been committed separately.) We're going to use essentially the same set of widgets for choosing modules that is used for choosing citation keys, so we pull the controlling logic out into a new class, QSelectionManager. I did not make this a QWidget. That seemed to me to be overkill, and it would have made things much more complicated, I think...and I'm not all that experienced with Qt, anyway. Anyone who wants to do that is of course welcome.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@19860 a592a061-630c-0410-9148-cb99ea01b6c8
2007-08-28 16:49:40 +00:00
|
|
|
|
|
|
|
|
2007-09-05 20:33:29 +00:00
|
|
|
protected:
|
2008-09-20 13:44:51 +00:00
|
|
|
/// Given a QModelIndex from availableLV, determines whether it has
|
|
|
|
/// been selected (i.e., is also in selectedLV).
|
2007-09-05 20:33:29 +00:00
|
|
|
bool isSelected(const QModelIndex & idx);
|
2008-01-09 18:51:02 +00:00
|
|
|
///
|
This commit changes the way individual LyXModule's are represented, both internally and in the .lyx files. The earlier version represented them by their `descriptive name', e.g., "Endnote" or "Theorems (AMS)", these being the same names used in the UI. This was a mistake, as becomes readily apparent when one starts to think about translating these strings. The modules ought to be represented by their filename, without the extension, just as TextClass's are.
The changes that accomplish this part are in ModuleList.{h,cpp}, configure.py, and the *.module files themselves. This is a format change, and the lyx2lyx is in those files.
By itself, that change would not be major, except for the fact that we do not want the module to be represented in the UI by its filename---e.g., theorems-std---but rather by a descriptive name, such as "Theorems". But that change turns out to be wholly non-trivial. The mechanism for choosing modules was the same as---indeed, was borrowed from---that in GuiCitation: You get a list of modules, and choosing them involves moving strings from one QListView to another. The models underlying these views are just QStringListModels, which means that, when you want to know what modules have been selected, you see what strings are in the "selected" QListView. But these are just the descriptive names, and we can't look up a module by its descriptive name if it's been translated. That, indeed, was the whole point of the change to the new representation.
So, we need a more complicated model underlying the QListView, one that will pair an identifying string---the filename minus the extension, in this case---with each item. This turns out not to be terribly difficult, though it took rather a while for me to understand why it's not difficult. There are two parts:
(i) GuiSelectionManger gets re-written to use any QAbstractListModel, not just a QStringListModel. This actually seems to improve the code, independently.
(ii) We then subclass QAbstractListModel to get the associated ID string, using the Qt::UserRole slot associated with each item to store its ID. This would be almost completely trivial if QAbstractListItem::itemData() included the QVariant associated with this role, but it doesn't, so there are some additional hoops through which to jump.
The new model, a GuiIdListModel, is defined in the files by that name. The changes in GuiSelectionManger.{h,cpp} make it more abstract; the changes in GuiDocument.{h,cpp} adapt it to the new framework.
I've also updated the module documenation to accord with this change.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@22501 a592a061-630c-0410-9148-cb99ea01b6c8
2008-01-12 04:28:12 +00:00
|
|
|
bool insertRowToSelected(int i, QMap<int, QVariant> const & itemData);
|
|
|
|
///
|
2009-08-14 20:37:12 +00:00
|
|
|
QAbstractItemView * availableLV;
|
2008-01-09 18:51:02 +00:00
|
|
|
///
|
|
|
|
QListView * selectedLV;
|
|
|
|
///
|
|
|
|
QPushButton * addPB;
|
|
|
|
///
|
|
|
|
QPushButton * deletePB;
|
|
|
|
///
|
|
|
|
QPushButton * upPB;
|
|
|
|
///
|
|
|
|
QPushButton * downPB;
|
|
|
|
///
|
This commit changes the way individual LyXModule's are represented, both internally and in the .lyx files. The earlier version represented them by their `descriptive name', e.g., "Endnote" or "Theorems (AMS)", these being the same names used in the UI. This was a mistake, as becomes readily apparent when one starts to think about translating these strings. The modules ought to be represented by their filename, without the extension, just as TextClass's are.
The changes that accomplish this part are in ModuleList.{h,cpp}, configure.py, and the *.module files themselves. This is a format change, and the lyx2lyx is in those files.
By itself, that change would not be major, except for the fact that we do not want the module to be represented in the UI by its filename---e.g., theorems-std---but rather by a descriptive name, such as "Theorems". But that change turns out to be wholly non-trivial. The mechanism for choosing modules was the same as---indeed, was borrowed from---that in GuiCitation: You get a list of modules, and choosing them involves moving strings from one QListView to another. The models underlying these views are just QStringListModels, which means that, when you want to know what modules have been selected, you see what strings are in the "selected" QListView. But these are just the descriptive names, and we can't look up a module by its descriptive name if it's been translated. That, indeed, was the whole point of the change to the new representation.
So, we need a more complicated model underlying the QListView, one that will pair an identifying string---the filename minus the extension, in this case---with each item. This turns out not to be terribly difficult, though it took rather a while for me to understand why it's not difficult. There are two parts:
(i) GuiSelectionManger gets re-written to use any QAbstractListModel, not just a QStringListModel. This actually seems to improve the code, independently.
(ii) We then subclass QAbstractListModel to get the associated ID string, using the Qt::UserRole slot associated with each item to store its ID. This would be almost completely trivial if QAbstractListItem::itemData() included the QVariant associated with this role, but it doesn't, so there are some additional hoops through which to jump.
The new model, a GuiIdListModel, is defined in the files by that name. The changes in GuiSelectionManger.{h,cpp} make it more abstract; the changes in GuiDocument.{h,cpp} adapt it to the new framework.
I've also updated the module documenation to accord with this change.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@22501 a592a061-630c-0410-9148-cb99ea01b6c8
2008-01-12 04:28:12 +00:00
|
|
|
QAbstractListModel * availableModel;
|
2008-01-09 18:51:02 +00:00
|
|
|
///
|
This commit changes the way individual LyXModule's are represented, both internally and in the .lyx files. The earlier version represented them by their `descriptive name', e.g., "Endnote" or "Theorems (AMS)", these being the same names used in the UI. This was a mistake, as becomes readily apparent when one starts to think about translating these strings. The modules ought to be represented by their filename, without the extension, just as TextClass's are.
The changes that accomplish this part are in ModuleList.{h,cpp}, configure.py, and the *.module files themselves. This is a format change, and the lyx2lyx is in those files.
By itself, that change would not be major, except for the fact that we do not want the module to be represented in the UI by its filename---e.g., theorems-std---but rather by a descriptive name, such as "Theorems". But that change turns out to be wholly non-trivial. The mechanism for choosing modules was the same as---indeed, was borrowed from---that in GuiCitation: You get a list of modules, and choosing them involves moving strings from one QListView to another. The models underlying these views are just QStringListModels, which means that, when you want to know what modules have been selected, you see what strings are in the "selected" QListView. But these are just the descriptive names, and we can't look up a module by its descriptive name if it's been translated. That, indeed, was the whole point of the change to the new representation.
So, we need a more complicated model underlying the QListView, one that will pair an identifying string---the filename minus the extension, in this case---with each item. This turns out not to be terribly difficult, though it took rather a while for me to understand why it's not difficult. There are two parts:
(i) GuiSelectionManger gets re-written to use any QAbstractListModel, not just a QStringListModel. This actually seems to improve the code, independently.
(ii) We then subclass QAbstractListModel to get the associated ID string, using the Qt::UserRole slot associated with each item to store its ID. This would be almost completely trivial if QAbstractListItem::itemData() included the QVariant associated with this role, but it doesn't, so there are some additional hoops through which to jump.
The new model, a GuiIdListModel, is defined in the files by that name. The changes in GuiSelectionManger.{h,cpp} make it more abstract; the changes in GuiDocument.{h,cpp} adapt it to the new framework.
I've also updated the module documenation to accord with this change.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@22501 a592a061-630c-0410-9148-cb99ea01b6c8
2008-01-12 04:28:12 +00:00
|
|
|
QAbstractListModel * selectedModel;
|
This is one of a series of patches that will merge the layout modules development in personal/branches/rgheck back into the tree.
Design goal: Allow the use of layout "modules", which are to LaTeX packages as layout files are to LaTeX document classes. Thus, one could have a module that defined certain character styles, environments, commands, or what have you, and include it in various documents, each of which uses a different document class, without having to modify the layout files themselves. For example, a theorems.module could be used with article.layout to provide support for theorem-type environments, without having to modify article.layout itself, and the same module could be used with book.layout, etc.
This third patch just re-factors some code presently in QCitation*. (It also incorporates some bug fixes that have been committed separately.) We're going to use essentially the same set of widgets for choosing modules that is used for choosing citation keys, so we pull the controlling logic out into a new class, QSelectionManager. I did not make this a QWidget. That seemed to me to be overkill, and it would have made things much more complicated, I think...and I'm not all that experienced with Qt, anyway. Anyone who wants to do that is of course welcome.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@19860 a592a061-630c-0410-9148-cb99ea01b6c8
2007-08-28 16:49:40 +00:00
|
|
|
|
2007-09-05 20:33:29 +00:00
|
|
|
protected Q_SLOTS:
|
|
|
|
///
|
2010-03-24 13:51:47 +00:00
|
|
|
void availableChanged(QModelIndex const & idx, QModelIndex const &);
|
2007-09-05 20:33:29 +00:00
|
|
|
///
|
2010-03-24 13:51:47 +00:00
|
|
|
void selectedChanged(QModelIndex const & idx, QModelIndex const &);
|
|
|
|
///
|
|
|
|
void availableChanged(QItemSelection const & qis, QItemSelection const &);
|
|
|
|
///
|
|
|
|
void selectedChanged(QItemSelection const & qis, QItemSelection const &);
|
2007-09-05 20:33:29 +00:00
|
|
|
///
|
This commit changes the way individual LyXModule's are represented, both internally and in the .lyx files. The earlier version represented them by their `descriptive name', e.g., "Endnote" or "Theorems (AMS)", these being the same names used in the UI. This was a mistake, as becomes readily apparent when one starts to think about translating these strings. The modules ought to be represented by their filename, without the extension, just as TextClass's are.
The changes that accomplish this part are in ModuleList.{h,cpp}, configure.py, and the *.module files themselves. This is a format change, and the lyx2lyx is in those files.
By itself, that change would not be major, except for the fact that we do not want the module to be represented in the UI by its filename---e.g., theorems-std---but rather by a descriptive name, such as "Theorems". But that change turns out to be wholly non-trivial. The mechanism for choosing modules was the same as---indeed, was borrowed from---that in GuiCitation: You get a list of modules, and choosing them involves moving strings from one QListView to another. The models underlying these views are just QStringListModels, which means that, when you want to know what modules have been selected, you see what strings are in the "selected" QListView. But these are just the descriptive names, and we can't look up a module by its descriptive name if it's been translated. That, indeed, was the whole point of the change to the new representation.
So, we need a more complicated model underlying the QListView, one that will pair an identifying string---the filename minus the extension, in this case---with each item. This turns out not to be terribly difficult, though it took rather a while for me to understand why it's not difficult. There are two parts:
(i) GuiSelectionManger gets re-written to use any QAbstractListModel, not just a QStringListModel. This actually seems to improve the code, independently.
(ii) We then subclass QAbstractListModel to get the associated ID string, using the Qt::UserRole slot associated with each item to store its ID. This would be almost completely trivial if QAbstractListItem::itemData() included the QVariant associated with this role, but it doesn't, so there are some additional hoops through which to jump.
The new model, a GuiIdListModel, is defined in the files by that name. The changes in GuiSelectionManger.{h,cpp} make it more abstract; the changes in GuiDocument.{h,cpp} adapt it to the new framework.
I've also updated the module documenation to accord with this change.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@22501 a592a061-630c-0410-9148-cb99ea01b6c8
2008-01-12 04:28:12 +00:00
|
|
|
virtual void addPB_clicked();
|
2007-09-05 20:33:29 +00:00
|
|
|
///
|
This commit changes the way individual LyXModule's are represented, both internally and in the .lyx files. The earlier version represented them by their `descriptive name', e.g., "Endnote" or "Theorems (AMS)", these being the same names used in the UI. This was a mistake, as becomes readily apparent when one starts to think about translating these strings. The modules ought to be represented by their filename, without the extension, just as TextClass's are.
The changes that accomplish this part are in ModuleList.{h,cpp}, configure.py, and the *.module files themselves. This is a format change, and the lyx2lyx is in those files.
By itself, that change would not be major, except for the fact that we do not want the module to be represented in the UI by its filename---e.g., theorems-std---but rather by a descriptive name, such as "Theorems". But that change turns out to be wholly non-trivial. The mechanism for choosing modules was the same as---indeed, was borrowed from---that in GuiCitation: You get a list of modules, and choosing them involves moving strings from one QListView to another. The models underlying these views are just QStringListModels, which means that, when you want to know what modules have been selected, you see what strings are in the "selected" QListView. But these are just the descriptive names, and we can't look up a module by its descriptive name if it's been translated. That, indeed, was the whole point of the change to the new representation.
So, we need a more complicated model underlying the QListView, one that will pair an identifying string---the filename minus the extension, in this case---with each item. This turns out not to be terribly difficult, though it took rather a while for me to understand why it's not difficult. There are two parts:
(i) GuiSelectionManger gets re-written to use any QAbstractListModel, not just a QStringListModel. This actually seems to improve the code, independently.
(ii) We then subclass QAbstractListModel to get the associated ID string, using the Qt::UserRole slot associated with each item to store its ID. This would be almost completely trivial if QAbstractListItem::itemData() included the QVariant associated with this role, but it doesn't, so there are some additional hoops through which to jump.
The new model, a GuiIdListModel, is defined in the files by that name. The changes in GuiSelectionManger.{h,cpp} make it more abstract; the changes in GuiDocument.{h,cpp} adapt it to the new framework.
I've also updated the module documenation to accord with this change.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@22501 a592a061-630c-0410-9148-cb99ea01b6c8
2008-01-12 04:28:12 +00:00
|
|
|
virtual void deletePB_clicked();
|
2007-09-05 20:33:29 +00:00
|
|
|
///
|
This commit changes the way individual LyXModule's are represented, both internally and in the .lyx files. The earlier version represented them by their `descriptive name', e.g., "Endnote" or "Theorems (AMS)", these being the same names used in the UI. This was a mistake, as becomes readily apparent when one starts to think about translating these strings. The modules ought to be represented by their filename, without the extension, just as TextClass's are.
The changes that accomplish this part are in ModuleList.{h,cpp}, configure.py, and the *.module files themselves. This is a format change, and the lyx2lyx is in those files.
By itself, that change would not be major, except for the fact that we do not want the module to be represented in the UI by its filename---e.g., theorems-std---but rather by a descriptive name, such as "Theorems". But that change turns out to be wholly non-trivial. The mechanism for choosing modules was the same as---indeed, was borrowed from---that in GuiCitation: You get a list of modules, and choosing them involves moving strings from one QListView to another. The models underlying these views are just QStringListModels, which means that, when you want to know what modules have been selected, you see what strings are in the "selected" QListView. But these are just the descriptive names, and we can't look up a module by its descriptive name if it's been translated. That, indeed, was the whole point of the change to the new representation.
So, we need a more complicated model underlying the QListView, one that will pair an identifying string---the filename minus the extension, in this case---with each item. This turns out not to be terribly difficult, though it took rather a while for me to understand why it's not difficult. There are two parts:
(i) GuiSelectionManger gets re-written to use any QAbstractListModel, not just a QStringListModel. This actually seems to improve the code, independently.
(ii) We then subclass QAbstractListModel to get the associated ID string, using the Qt::UserRole slot associated with each item to store its ID. This would be almost completely trivial if QAbstractListItem::itemData() included the QVariant associated with this role, but it doesn't, so there are some additional hoops through which to jump.
The new model, a GuiIdListModel, is defined in the files by that name. The changes in GuiSelectionManger.{h,cpp} make it more abstract; the changes in GuiDocument.{h,cpp} adapt it to the new framework.
I've also updated the module documenation to accord with this change.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@22501 a592a061-630c-0410-9148-cb99ea01b6c8
2008-01-12 04:28:12 +00:00
|
|
|
virtual void upPB_clicked();
|
2007-09-05 20:33:29 +00:00
|
|
|
///
|
This commit changes the way individual LyXModule's are represented, both internally and in the .lyx files. The earlier version represented them by their `descriptive name', e.g., "Endnote" or "Theorems (AMS)", these being the same names used in the UI. This was a mistake, as becomes readily apparent when one starts to think about translating these strings. The modules ought to be represented by their filename, without the extension, just as TextClass's are.
The changes that accomplish this part are in ModuleList.{h,cpp}, configure.py, and the *.module files themselves. This is a format change, and the lyx2lyx is in those files.
By itself, that change would not be major, except for the fact that we do not want the module to be represented in the UI by its filename---e.g., theorems-std---but rather by a descriptive name, such as "Theorems". But that change turns out to be wholly non-trivial. The mechanism for choosing modules was the same as---indeed, was borrowed from---that in GuiCitation: You get a list of modules, and choosing them involves moving strings from one QListView to another. The models underlying these views are just QStringListModels, which means that, when you want to know what modules have been selected, you see what strings are in the "selected" QListView. But these are just the descriptive names, and we can't look up a module by its descriptive name if it's been translated. That, indeed, was the whole point of the change to the new representation.
So, we need a more complicated model underlying the QListView, one that will pair an identifying string---the filename minus the extension, in this case---with each item. This turns out not to be terribly difficult, though it took rather a while for me to understand why it's not difficult. There are two parts:
(i) GuiSelectionManger gets re-written to use any QAbstractListModel, not just a QStringListModel. This actually seems to improve the code, independently.
(ii) We then subclass QAbstractListModel to get the associated ID string, using the Qt::UserRole slot associated with each item to store its ID. This would be almost completely trivial if QAbstractListItem::itemData() included the QVariant associated with this role, but it doesn't, so there are some additional hoops through which to jump.
The new model, a GuiIdListModel, is defined in the files by that name. The changes in GuiSelectionManger.{h,cpp} make it more abstract; the changes in GuiDocument.{h,cpp} adapt it to the new framework.
I've also updated the module documenation to accord with this change.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@22501 a592a061-630c-0410-9148-cb99ea01b6c8
2008-01-12 04:28:12 +00:00
|
|
|
virtual void downPB_clicked();
|
2007-09-05 20:33:29 +00:00
|
|
|
///
|
|
|
|
void availableLV_doubleClicked(const QModelIndex &);
|
|
|
|
///
|
|
|
|
bool eventFilter(QObject *, QEvent *);
|
This is one of a series of patches that will merge the layout modules development in personal/branches/rgheck back into the tree.
Design goal: Allow the use of layout "modules", which are to LaTeX packages as layout files are to LaTeX document classes. Thus, one could have a module that defined certain character styles, environments, commands, or what have you, and include it in various documents, each of which uses a different document class, without having to modify the layout files themselves. For example, a theorems.module could be used with article.layout to provide support for theorem-type environments, without having to modify article.layout itself, and the same module could be used with book.layout, etc.
This third patch just re-factors some code presently in QCitation*. (It also incorporates some bug fixes that have been committed separately.) We're going to use essentially the same set of widgets for choosing modules that is used for choosing citation keys, so we pull the controlling logic out into a new class, QSelectionManager. I did not make this a QWidget. That seemed to me to be overkill, and it would have made things much more complicated, I think...and I'm not all that experienced with Qt, anyway. Anyone who wants to do that is of course welcome.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@19860 a592a061-630c-0410-9148-cb99ea01b6c8
2007-08-28 16:49:40 +00:00
|
|
|
|
2007-09-05 20:33:29 +00:00
|
|
|
private:
|
2008-01-09 18:51:02 +00:00
|
|
|
///
|
|
|
|
virtual void updateAddPB();
|
|
|
|
///
|
|
|
|
virtual void updateDelPB();
|
|
|
|
///
|
|
|
|
virtual void updateDownPB();
|
|
|
|
///
|
|
|
|
virtual void updateUpPB();
|
This commit changes the way individual LyXModule's are represented, both internally and in the .lyx files. The earlier version represented them by their `descriptive name', e.g., "Endnote" or "Theorems (AMS)", these being the same names used in the UI. This was a mistake, as becomes readily apparent when one starts to think about translating these strings. The modules ought to be represented by their filename, without the extension, just as TextClass's are.
The changes that accomplish this part are in ModuleList.{h,cpp}, configure.py, and the *.module files themselves. This is a format change, and the lyx2lyx is in those files.
By itself, that change would not be major, except for the fact that we do not want the module to be represented in the UI by its filename---e.g., theorems-std---but rather by a descriptive name, such as "Theorems". But that change turns out to be wholly non-trivial. The mechanism for choosing modules was the same as---indeed, was borrowed from---that in GuiCitation: You get a list of modules, and choosing them involves moving strings from one QListView to another. The models underlying these views are just QStringListModels, which means that, when you want to know what modules have been selected, you see what strings are in the "selected" QListView. But these are just the descriptive names, and we can't look up a module by its descriptive name if it's been translated. That, indeed, was the whole point of the change to the new representation.
So, we need a more complicated model underlying the QListView, one that will pair an identifying string---the filename minus the extension, in this case---with each item. This turns out not to be terribly difficult, though it took rather a while for me to understand why it's not difficult. There are two parts:
(i) GuiSelectionManger gets re-written to use any QAbstractListModel, not just a QStringListModel. This actually seems to improve the code, independently.
(ii) We then subclass QAbstractListModel to get the associated ID string, using the Qt::UserRole slot associated with each item to store its ID. This would be almost completely trivial if QAbstractListItem::itemData() included the QVariant associated with this role, but it doesn't, so there are some additional hoops through which to jump.
The new model, a GuiIdListModel, is defined in the files by that name. The changes in GuiSelectionManger.{h,cpp} make it more abstract; the changes in GuiDocument.{h,cpp} adapt it to the new framework.
I've also updated the module documenation to accord with this change.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@22501 a592a061-630c-0410-9148-cb99ea01b6c8
2008-01-12 04:28:12 +00:00
|
|
|
///
|
2007-09-05 20:33:29 +00:00
|
|
|
bool selectedHasFocus_;
|
This is one of a series of patches that will merge the layout modules development in personal/branches/rgheck back into the tree.
Design goal: Allow the use of layout "modules", which are to LaTeX packages as layout files are to LaTeX document classes. Thus, one could have a module that defined certain character styles, environments, commands, or what have you, and include it in various documents, each of which uses a different document class, without having to modify the layout files themselves. For example, a theorems.module could be used with article.layout to provide support for theorem-type environments, without having to modify article.layout itself, and the same module could be used with book.layout, etc.
This third patch just re-factors some code presently in QCitation*. (It also incorporates some bug fixes that have been committed separately.) We're going to use essentially the same set of widgets for choosing modules that is used for choosing citation keys, so we pull the controlling logic out into a new class, QSelectionManager. I did not make this a QWidget. That seemed to me to be overkill, and it would have made things much more complicated, I think...and I'm not all that experienced with Qt, anyway. Anyone who wants to do that is of course welcome.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@19860 a592a061-630c-0410-9148-cb99ea01b6c8
2007-08-28 16:49:40 +00:00
|
|
|
};
|
2007-08-31 05:53:55 +00:00
|
|
|
|
|
|
|
} // namespace frontend
|
|
|
|
} // namespace lyx
|
|
|
|
|
2007-09-05 20:33:29 +00:00
|
|
|
#endif // GUISELECTIONMANAGER
|