Locking counter added to MacroData: it is increased before drawing/
metric calculations and decreased afterwards in InsetMathMacro. If a
macro is already locked at that point, "Self reference: \foo" is
drawn instead of the macro definition to avoid endless loops.
Moreover inside of the arguments of the macro the counter is
temporarily decreased as those cases do not cause loops. (fixes bug
#1395)
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@17841 a592a061-630c-0410-9148-cb99ea01b6c8
Locking counter added to MacroData: it is increased before drawing/
metric calculations and decreased afterwards in InsetMathMacro. If a
macro is already locked at that point, "Self reference: \foo" is
drawn instead of the macro definition to avoid endless loops.
Moreover inside of the arguments of the macro the counter is
temporarily decreased as those cases do not cause loops. (fixes bug
#1395)
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@17836 a592a061-630c-0410-9148-cb99ea01b6c8
* src/frontends/qt4/TocWidget.[Ch]:
- rename enableButtons to enableControls and include slider enabling/disabling
- only set slider if there is some content
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@17835 a592a061-630c-0410-9148-cb99ea01b6c8
We output the \inputencoding command before the section if possible, and we
ignore all encoding changes in the section. Commands from the unicodesymbols
file will be used for characters that can't be encoded in the current
encoding instead of switching the encoding.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@17827 a592a061-630c-0410-9148-cb99ea01b6c8
http://bugzilla.lyx.org/show_bug.cgi?id=3449
One problem was no metric calculation was done for insets on cursor movement. Of course scrolling or entering character caused the missing metric calls, hence the described behavior in the bug report. This is fixed by re-implementing idxLast(), idxFirst() and notifyCursorLeaves().
Another problem was that 'a' and '1' were drawn at the same position because of a mis-calculation of the x-position in InsetMathMacro::draw().
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@17826 a592a061-630c-0410-9148-cb99ea01b6c8
http://bugzilla.lyx.org/show_bug.cgi?id=3450
* ControlMath
- new MathSymbol struct that summarize the symbol attributes (including font and fontcode)
* QDelimiterDialog:
- make use of the new MathSymbol for the ListWidget.
- store the latex name in the tooltip instead of lookup for it.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@17786 a592a061-630c-0410-9148-cb99ea01b6c8
options accepted by the current paragraph.
ui/QParagraphUi.ui
Changed combo box for alignment to radio buttons. Added
checkbox for default alignment.
QParagraphDialog.[Ch]
public:
void checkAlignmentRadioButtons();
void alignmentToRadioButtons(LyXAlignment);
LyXAlignment getAlignmentFromDialog();
private:
typedef std::map<LyXAlignment, QRadioButton *> QPRadioMap;
QPRadioMap radioMap;
protected Q_SLOTS:
void change_adaptor();
void enableLinespacingValue(int);
void on_alignDefaultCB_toggled(bool);
QParagraph.C
Rework apply() and update_contents() using new functions just
mentioned.
Thanks to Abdel for his help.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@17776 a592a061-630c-0410-9148-cb99ea01b6c8
* src/mathed/MathSupport.C:
add "slash" to the decoration table.
* src/mathed/InsetMathBig.C
(InsetMathBig::draw): don't remove backslash delimiter.
(InsetMathBig::isBigInsetDelim): add "\\" and "\slash" to
the delimiters table.
* src/frontends/qt4/QDelimiterDialog.C
(fix_name): return "\\" instead of "\backslash" as that now
works after the fixes above.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@17771 a592a061-630c-0410-9148-cb99ea01b6c8
- only set wide() to true for insets if they are not nested
in a non-wide inset (bug 3275)
* src/rowpainter.C (inNarrowInset):
- new helper func for the above.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@17761 a592a061-630c-0410-9148-cb99ea01b6c8
- do not attempt to toggle math insets via ALL_INSETS_TOGGLE
(fixes bug 3358)
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@17756 a592a061-630c-0410-9148-cb99ea01b6c8
* src/frontends/qt4/QDelimiterDialog.C
(fix_name): Return "|" instead of "\|" as this is equivalent to \Vert.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@17752 a592a061-630c-0410-9148-cb99ea01b6c8
* src/support/tempname.C
(tempName): Return FileName in utf8 encoding.
* src/lyxsocket.[Ch]
(LyXServerSocket::LyXServerSocket): Use FileName instead of string
and set the env var LYXSOCKET in the filesystem encoding as this
is what the client expects.
* src/support/socktools.[Ch]
(socktools::listen): Convert to FileName and use the filesystem
encoding for the file names stored in the sockaddr_un struct.
* src/client/client.C
(socktools::connect): Convert to FileName and use the filesystem
encoding for the file names stored in the sockaddr_un struct.
(LyXDataSocket::LyXDataSocket, main): Convert to FileName.
* src/lyx_main.C
(LyX::exec): Use FileName instead of string in socket code.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@17749 a592a061-630c-0410-9148-cb99ea01b6c8
http://bugzilla.lyx.org/show_bug.cgi?id=3413
* ui/QNomenclUi.ui
- description field: replace LineEdit with TexEdit
* QNomencl.C: take care of the \n <-> \\ conversion in the description field.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@17748 a592a061-630c-0410-9148-cb99ea01b6c8
* ControlMath.[Ch]
- mathSymbol(), texName(): new method for easy access of math symbols and associated TeX names
- latex_delimiters: allowed delimiters transferred from QDelimiterDialog.C
* QDelimiterDialog.C:
- makes use of the above.
- display the TeX code in a label instead of beside the symbol.
* QDelimiterUi.ui
- shrink it so that it could nicely fit in a DockWidget but this doesn't work, the dialog is too large!
- texCodeL: new label.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@17747 a592a061-630c-0410-9148-cb99ea01b6c8
This fixes some encoding problems, and hopefully also bug 3410.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@17746 a592a061-630c-0410-9148-cb99ea01b6c8
* src/LaTeXFeatures.C (mustProvide): new method; returns true when
isRequired is true and the feature is not provided by the
textclass.
(getPackages, getLyXSGMLEntities): use mustProvide when relevant.
* src/bufferparams.C (getEngine):
* src/buffer.C (validate): adapt to change below.
* src/lyxtextclass.C (read): replace tags ProvidesNatbib,
ProvidesMakeidx, ProvidesUrl and ProvidesAmsmath by a generic
"Provides".
(provides): take a string as argument.
* lib/scripts/layout2layout.py (convert): convert "ProvidesXxx" tags
to "Provides xxx".
* lib/layouts/*: update to format 4.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@17740 a592a061-630c-0410-9148-cb99ea01b6c8
InsetCommandParams)
* src/mathed/InsetMathCommand.[Ch]
(CommandInset::createDialogStr): Move to InsetMathRef, since it is
no longer generic.
* src/mathed/MathFactory.C
(createInsetMath_fromDialogStr): Use InsetCommandMailer instead of
manual parsing. This ensures that the syntax is correct.
* src/mathed/InsetMathRef.[Ch]
(InsetMathRef::createDialogStr): Moved here from InsetMathCommand,
but use InsetCommandMailer.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@17738 a592a061-630c-0410-9148-cb99ea01b6c8
* src/lyxfunc.C
(LyXFunc::dispatch): Call LFUN_DIALOG_SHOW_NEW_INSET instead of
LFUN_DIALOG_SHOW, since the former seems to be connected to the last
open inset.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@17736 a592a061-630c-0410-9148-cb99ea01b6c8
Changed dialog and added routines to deal with an "auto" label
in cases where defaults are used.
ui/MarginsUi.ui: Changed labels for width and height to checkboxes. Removed connections.
checkwidgets.[Ch]: Extended checkedLineEdit routines to take a QWidget.
qt_helpers.[Ch]:
Added void lengthToWidgets(QLineEdit *, LengthCombo *, LyXLength const &, LyXLength::UNIT)
Added void lengthAutoToWidgets(QLineEdit *, LengthCombo *, LyXLength const &, LyXLength::UNIT)
Added void setAutoTextCB(QCheckBox *, QLineEdit *, LengthCombo *)
validators.[Ch]:
Added class LengthAutoValidator : public LengthValidator
Added class DoubleAutoValidator : public QDoubleValidator
QGraphicsDialog.[Ch]
Added virtual void setAutoText()
Added virtual void on_WidthCB_toggled(bool)
Added virtual void on_HeightCB_toggled(bool)
Used the new functions to set "auto" in default cases and toggle checkboxes as needed.
Set validator for scale.
Re-organized connect routines.
QGraphics.C:
Completely re-worked update_contents().
Significant changes to apply().
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@17735 a592a061-630c-0410-9148-cb99ea01b6c8
1) launch the dialog
2) select a delimiter in the left pane
3) Tab
4) select a delimiter in the right pane
5) Enter
So:
- Also enable the quick insertion while in the right pane
- Do not limit the quick insertion to matched key
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@17732 a592a061-630c-0410-9148-cb99ea01b6c8
- ListWidget instead of combo,
- matched delimiters on the same row,
- immediate insertion on "enter" or "double-click" if the 'match' option is checked.
- simplification of the code.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@17731 a592a061-630c-0410-9148-cb99ea01b6c8
labelstring is set (instead of using this value only as a
fallback) (bug 3351)
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@17729 a592a061-630c-0410-9148-cb99ea01b6c8
Most of the change is about using the new private member delimiters_ instead of the "delim" table. Also, we don't display an icon when the delimiter is one character.
I did not manage to let the combos expand to the maximum.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@17727 a592a061-630c-0410-9148-cb99ea01b6c8
Most important improvements:
- read file character by character and treat newline like space characters.
Thus the @ does not need to be at the beginning of a line.
- it reads @string entries and replaces the strings in the field values
- it also handles @comment entries
- it recovers from syntax errors at the next entry starting with @
- it ignores everything between entries
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@17723 a592a061-630c-0410-9148-cb99ea01b6c8
http://bugzilla.lyx.org/show_bug.cgi?id=3412
* QNomenclDialog::QNomenclDialog(): setting the focus proxy in the Description edit box.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@17719 a592a061-630c-0410-9148-cb99ea01b6c8
http://bugzilla.lyx.org/show_bug.cgi?id=3408http://bugzilla.lyx.org/show_bug.cgi?id=3409
The missing redraw was introduced with "Draw only decoration" optimisation in mathed. Setting the flags to Update::Force in case of Preview mode fixes the problem.
* InsetMathHull::notifyCursorLeaves(): set the cursor flags to 'Force'
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@17718 a592a061-630c-0410-9148-cb99ea01b6c8
* ControlToc::update(): get rid of the pure virutal method.
* QToc::initialiseParams(): overload ControlToc method.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@17708 a592a061-630c-0410-9148-cb99ea01b6c8
keyboard input via kmap, clipboard and selection) to normalized form KC
(precomposed characters) since we don't support the decomposed form very
well.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@17702 a592a061-630c-0410-9148-cb99ea01b6c8
isdigit from ctype.h, because the latter are locale dependant and do not
work with char_type.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@17698 a592a061-630c-0410-9148-cb99ea01b6c8
* src/frontends/qt4/QTabular.C: change "Block" to "Justified"
to avoid translation clash and to align with paragraph settings
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@17694 a592a061-630c-0410-9148-cb99ea01b6c8
http://bugzilla.lyx.org/show_bug.cgi?id=3288
This is recommended by Qt:
Qt has caught an exception thrown from an event handler. Throwing
exceptions from an event handler is not supported in Qt. You must
reimplement QApplication::notify() and catch all exceptions there.
* GuiApplication::notify(): reimplemented from QApplication::notify().
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@17688 a592a061-630c-0410-9148-cb99ea01b6c8
* Painter:
- preeditText(), dashedUnderline(): new methods for CJK support.
* GuiWorkArea:
- inputMethodQuery(): new Qt inherited method for proper CJK support.
- inputMethodEvent(): now properly take care of input methods.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@17671 a592a061-630c-0410-9148-cb99ea01b6c8
again (bug 3304)
* src/intl.C
(Intl::initKeyMapper): Don't set the char set of trans anymore
* src/chset.[Ch]: delete, no longer needed
* lib/kbd/*.cdef: ditto
* src/lyxrc.[Ch]: remove RC_SCREEN_FONT_ENCODING and font_norm,
these are no longer needed
* src/lyxfunc.C: adapt to lyxrc changes
* src/Makefile.am: remove deleted files
* lib/Makefile.am: ditto
* development/scons/scons_manifest.py: ditto
* src/text3.C
(LyXText::dispatch): reenable the kmap mechanism
* src/trans_mgr.[Ch]
(TransManager::setCharset): remove, no longer needed
(TransManager::insert): remove, since it would be identical to
insertVerbatim now
(TransManager::insertVerbatim): rename to insert
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@17665 a592a061-630c-0410-9148-cb99ea01b6c8
This is purely mechanical, and touches only code that is currently not active.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@17657 a592a061-630c-0410-9148-cb99ea01b6c8
* src/text.C (breakParagraph): setCursor does not set current_font when
applied to a CursorSlice (fixes bug 3143)
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@17654 a592a061-630c-0410-9148-cb99ea01b6c8
Problem was that SIGNAL itemSelectionChanged was not connected to anything.
* QRefDialog::selectionChanged(): new slot for itemSelectionChanged signal.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@17615 a592a061-630c-0410-9148-cb99ea01b6c8
"View" button in TeX information dialog not enabled when file is selected with the keyboard. Problem was that SIGNAL itemSelectionChanged was not connected to anything. Also made some minor stylistic changes to the code.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@17614 a592a061-630c-0410-9148-cb99ea01b6c8
The crash happens on alt+up and alt+down if the position of the cursor
in the moved paragraph is beyond the length of the target paragraph.
To avoid it the Position of the iterators for the target paragraph must
be corrected. I set it to 0 as i assume it is not really used.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@17613 a592a061-630c-0410-9148-cb99ea01b6c8
breakParagraph seems to be called five times: in buffer.C, by
insertStringAsLines; and in text3.C, for LFUN_BREAK_PARAGRAPH,
LFUN_BREAK_PARAGRAPH_KEEP_LAYOUT, LFUN_BREAK_PARAGRAPH_SKIP (which
itself calls LFUN_BREAK_PARAGRAPH if a paragraph will be broken), and
for LFUN_FLOAT_LIST. My sense was that the KEEP_LAYOUT version maybe
shouldn't reset the text style. That's why I put it where I did. But I
doubt it matters very much, and I had it in breakParagraph myself at one
point.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@17612 a592a061-630c-0410-9148-cb99ea01b6c8
There is a user visible change with this commit: For text insets, the button stays "highlighted" as long as the mouse cursor is within the inset but not within a nested inset. Formerly the button was highlighted only when hovered. This new behaviour is better because we can now imagine funkier behaviour like inset color background change when hovered. Also the small math pink corners can be adapted to react to mouse hover in the future. Ideally we should also "highlight" the button when entering the inset via the keyboard or when the keyboard cursor is just before the inset (because we can then use Ctrl-i).
* BufferView:
- getCoveringInset(): new method.
- workAreaDispatch(): use getCoveringInset() instead of LyXText::checkInsetHit()
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@17610 a592a061-630c-0410-9148-cb99ea01b6c8
* src/support/unicode.C (convert): do not forget to reset lyxerr to
std::dec type of output.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@17609 a592a061-630c-0410-9148-cb99ea01b6c8
* src/mathed/InsetMathScript.C
(InsetMathScript::dy01): Make sure that the subscript is placed
not higher than when it appears alone.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@17602 a592a061-630c-0410-9148-cb99ea01b6c8
- whitespace. I forgot to save the changes before committing :-(
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@17595 a592a061-630c-0410-9148-cb99ea01b6c8
- some further refinement (and cleanup) of the triple click behaviour,
from Richard G. Heck.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@17594 a592a061-630c-0410-9148-cb99ea01b6c8
The string representation of math data stored in an undo could not be
read back. Now we store the math directly and do not convert to and from
a string.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@17591 a592a061-630c-0410-9148-cb99ea01b6c8
http://bugzilla.lyx.org/show_bug.cgi?id=3144
The problem was that we set the cursor even for mouse hover event.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@17589 a592a061-630c-0410-9148-cb99ea01b6c8
- reimplement doubleClickTimeout() from the qt3 frontend
in order to get triple clicking working (bug 3272).
This is just an emultation of triple clicking, since qt does not have
a mouseTripleClickEvent()
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@17588 a592a061-630c-0410-9148-cb99ea01b6c8
* src/frontends/qt4/ui/BulletsUi.ui:
- assure that six columns of bullets are displayed in the widget
(fix bug 3147).
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@17584 a592a061-630c-0410-9148-cb99ea01b6c8
This changes the semantics of isOK() and operator(), comments from Bernhard below:
With the old version of lyxlex it was _impossible_ to check whether reading an integer, float, ... succeeded or not. The current solution to check for is.bad() in some cases and in other cases use is.good() does not give the desired information. Moreover the result of is.bad() depends on the stl implementation and behaves different for linux and windows.
the bug was introduced by the patch that fixed the bug that crashed lyx when "inset-insert ert" was executed from the command buffer.
The lexer has the method isOK() which reflects the status of the stream is.
The operators void* and ! are not really well defined (they depend on the value of is.bad()). What is missing is a test if the last reading operation was successful and thus the returned value is valid.
That's what i implemented in this patch.
The new rule for using the lexer:
if you want to know if the lexer still has data to read (either from the stream or from the pushed token) then use "lex.isOK()".
If you want to test if the last reading operation was successful then use eg. "if (lex) {...}" or unsuccessful then use eg. "if (!lex) {...}"
an example:
int readParam(LyxLex &lex) {
int param = 1; // default value
if (lex.isOK()) { // the lexer has data to read
int p; // temporary variable
lex >> p;
if (lex) param = p; // only use the input if the reading operation was successful
}
return param;
}
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@17569 a592a061-630c-0410-9148-cb99ea01b6c8
support.
LyXRC::font_norm stays for now, since it is still used for the kbmap stuff.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@17566 a592a061-630c-0410-9148-cb99ea01b6c8
* src/mathed/MathData.C
(MathArray::metrics): Explicitly initialize kerning_ as it may
contain random data when the nucleus is an empty MathFont inset.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@17560 a592a061-630c-0410-9148-cb99ea01b6c8
- add flags for debug/release/profile
- also build qt4 as one file with gcc
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@17558 a592a061-630c-0410-9148-cb99ea01b6c8
* src/buffer.C
(Buffer::makeLaTeXFile): Use runparams.encoding to be consistent
* src/insets/insetinclude.C
(InsetInclude::latex): Change runparams.encoding to the encoding of
the child document for makeLateXFile
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@17555 a592a061-630c-0410-9148-cb99ea01b6c8
TODO: extract the latexHighlighter class into its own .[Ch] files.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@17553 a592a061-630c-0410-9148-cb99ea01b6c8
(RowPainter::paintHebrewComposeChar): Convert characters 0xf8 and
0xe3 from CP1255 to UCS4 encoding
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@17547 a592a061-630c-0410-9148-cb99ea01b6c8
Those arguments are not needed because update() will always look at what is currently selected and the info is there.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@17546 a592a061-630c-0410-9148-cb99ea01b6c8
- now simple citation insertion can be done with the keyboard only (enter key will close the dialog and insert the chosen key).
- now search also within bib entry information (very fast)
- new case sensitive option
- new regex option.
- QCitation: code simplified, some code went to ControlCitation.
- QCitationDialog: code simplified
- lots of polish in the dialogs...
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@17539 a592a061-630c-0410-9148-cb99ea01b6c8
* DockView.h: add the orientation option.
* QViewSource: now a model and a controller
* QViewSourceDialog: now only a simple QWidget.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@17538 a592a061-630c-0410-9148-cb99ea01b6c8
* transfer CiteEngine enum declaration to biblio.h
* delete unneeded CiteEngine_enum
* cite_engine is now cite_engine_ and is private.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@17537 a592a061-630c-0410-9148-cb99ea01b6c8
- replace unneeded dynamic_cast with static_cast
- fix citation info for normal BIBITEM entries.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@17535 a592a061-630c-0410-9148-cb99ea01b6c8
* src/encoding.C
(arabic_table): Delete (this was used for fonts in iso8859-6 encoding)
(arabic_table2): Rename to arabic_table and update code points to UCS4.
The old code points in this table where a custom encoding:
Some ASCII positions and some unused positions of the iso8859-6
encoding where used to encode the shaped forms. Example:
The character hamza was encoded with 0x41. The iso8859-6 encoding in
lib/encodings contained ithe value 0xfe80 at position 0x41 before
the transition to unicode => Change the value 0x41 to 0xfe80 in the
table.
This old custom encoding was needed because the transformed characters
needed to be transported through 8bit characters.
(Encodings::is_arabic_special): Change code points from iso8859-6 to UCS4
(Encodings::isComposeChar_arabic): Ditto
(Encodings::is_arabic): Ditto
(Encodings::transformChar): Always use arabic_table
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@17532 a592a061-630c-0410-9148-cb99ea01b6c8
