Move cursor at beginning of selection after deletion. Else backspace
operation gets stuck in a loop (tries to remove the selection again
and again).
This also fixes backspace deletion of insets with confirmDeletion() == true.
Fixes#11630
(cherry picked from commit adfd38e4ef)
If the file of an InsetInclude does not exist, loadIfNeeded will try
again and again to look for it. This is very bad for files with many
include insets, especially on windows.
Fixes bug #11656.
(cherry picked from commit aeed6fb8fa)
This is better than making sure that the inset has exactly one cell.
In the future, inset-dissolve could be extended to dissolve all the
cells contents in the enclosing text.
Note that this check does not appear in mathed, and using dissolve in
e.g. fraction inset may lead to data loss (only current cell contents
is preserved).
(cherry picked from commit 5ac3b88007)
This patch is not ready yet. Moreover, change the assertion in
InsetMathGrid::colAlign to a simple test.
As a consequence, math split inset might show a bad alignment in some
situations.
This reverts commit d3fd915662.
Like with macOS, the Wayland compositor seems to require a
backingstore when doing partial updates like we do.
This extends the mechanism that has been introduced for macOS. This
has to be done at run time, not compile time.
Fixes bug #11692.
(cherry picked from commit 575761c665)
The warning about unneeded std::move can be solved by conditioning on
C++14 mode.
The warnings about deprecated copy is harder, so we disable it for
now. We will be able to fix our part, but Qt triggers it a lot too.
(cherry picked from commit 134f3aedaf)
Using a map would sort the elements in alphabetic ordering, which
means that when the number of elements is larger than 100, the wrong
elements get pruned.
This commit uses a list instead. Searching an item needs linear time,
but this should not be a problem for a list with less than 100
elements.
Fixes bug #10310.
(cherry picked from commit 58d22e0c6e)
Make InsetGrid::colAlign a normal method and make it check whether
buffer is valid before using it. This avoids crashes as we have seen
in 2.3.3 (see e.g. #11686).
There is still an assertion so that failure is noticeable before release.
(cherry picked from commit 44816adce6)
Horizontal scrolling used to be taken into account when updating caret
geometry. This is wrong since it may have changed when time comes to
draw the caret. This leads to a situation where the first apparition
of the caret is at a wrong place.
Now the extra horizontal offset is used at drawing time.
Fixes bug #11603.
(cherry picked from commit bdf58b77e7)
When automatic command termination was added to texstream it was
forgotten to reset its status after a math inset.
(cherry picked from commit 0573bf92e0)
When a selection spans more than one line, we now check for whether
there is a change at one position after the last position of each
fully selected line.
This fixes#11629.
(cherry picked from commit 27f89144bb)
More complicated than I wished for, but color handling in RTL is
particularly tricky.
The three versions are needed due to the differences between [pdf]latex,
xetex, luatex/luabidi and luatex/babel.
(cherry picked from commit 4e74dd0d42)
Loading keyval does not work any longer. Fix it properly by de-activating
the equal character locally if graphics options use it.
We do this statically for Turkish and Latin in stable, as opposed to
master (where we have the ActiveChars languages tag)
With !using_begin_end, we need to compare against the paragraph language
since cur_language is always empty.
No status entry needed as this fixes a bug introduced after 2.3.3.
See the discussion. The decision was just to keep re-trying for a
bit, since the lock preventing us from removing the old file seems
to clear after a bit.
(cherry picked from commit d96a9aa37f)
Do not replace a latex command with the corresponding symbol
in the unicodesymbols file unless it can be encoded in the
document encoding.
The mhchem \ce inset is a text mode environment but allows entering
spaces and mathmode commands. However, even if it doesn't allow unicode
symbols, LyX allows entering them (by copy/paste, for example), causing
latex errors. As a unicode symbol may have a proper latex representation
from the unicodesymbols file, use it instead of the bare symbol. Here, we
don't care about the mode because both text and math mode should be allowed.
For example, the ⟶ symbol is not recognized but its latex representation
(\longrightarrow) is fine. Of course, there may be symbols that are
not recognized anyway, but this is better because they cause explicit
errors from mhchem instead of cryptic iconv errors in case they cannot
be represented in the document encoding.
A branch inset modifies the layout of the internal structures in
which the text is organized. When a branch is active, it is as if it
was not there, but its only presence makes a paragraph which would not
be the last one to actually be the last one, or the check for the
language of the previous paragraph to fail because there is no
previous paragraph before the first one in a branch inset.
Oney way I found to tackle it, is tracking whether the typesetted
paragraphs are actually part of an active branch inset and acting
accordingly.
Avoid an endless loop when in the definition of a macro the macro
itself is used in the LyX representation part.
(cherry picked from commit 1cb2a443b5)
The current heuristics only considered modules with styles that defined
a searched command in their preamble, and only for commands/environments
that were defined in the document's preamble. This limited the module
support drastically.
The new heuristics also checks for commands coming from packages. If the
command is not (re-)defined in the document preamble, it checks modules
that provide a style with a matching LaTeXName, checks for their
requirements and matches those with the packages loaded by the document.
If no module provides a searched style, but we found modules that load
packages that are loaded in the imported tex file, and if those packages
are not auto-loaded by LyX anyway, we also load this module.
fixes: #11259, part of #8229
(cherry picked from commit 0b54650f0e)
This is a much less invasive version of da2696cc+da2696cc, which
reduces the risk to a minimum. There may be other Row members that
need resetting, we'll see that later.
Fixes bug #11396.
This is hardcoded for now for simplicity and to allow backporting to
2.3.
The behavior is unchanged for all languages but Chinese, Japanese or
Korean.
Fixes part of bug #10299.
(cherry picked from commit 26c2811cc4)
This seems to be necessary on windows, where math editing can get very
slow. Note that other methods like rbearing already use a cache.
In the future all these caches for single characters shall be unified.
(cherry picked from commit d3979e798c)
In full screen mode, it is possible to restrict the text width. In
this case, the paint bar should not be painted outside of this
restricted area.
Fixes bug #11286.
(cherry picked from commit 7485225cc6)
Call gunzip with quoted filenames as they may contain spaces or
other special characters.
In computing the length of the extension, the code does not account
for the prefix "unzipped_", which is added when the zipped filename
does not have one of the extensions "gz", "z", "Z", or "svgz", and
thus the used index is out of bounds. See also this thread:
https://www.mail-archive.com/lyx-devel@lists.lyx.org/msg207360.html
(cherry picked from commit 69726b832b)
(cherry picked from commit 7296e0e6ba)
To reproduce: Do a search for text in a footnote (say) that is
currently closed. Click inside the now open footnote. It will close
by itself.
We need to know whether we can go into the inset, not whether we can
edit once we're there.
(cherry picked from commit 4484cc7751)
This commit removes the adhoc code in GuiPrefs and moves it to LyXRC,
so that it triggers in every preference change.
The code has also been updated to trigger on more variables, e.g.
font_*_foundry.
Note that the actual function that are called have not been changed
(addPreviews and LFUN_SCREEN_FONT_UPDATE), although there are doubts
that they behave as needed (see FIXMEs).
Fixes bug #11498.
(cherry picked from commit 954531f247)
A typical problem when change tracking is on is:
1/ insert a new space between two words (as if you want to insert a new one)
2/ move the cursor
3/ see how one has one inserted and one deleted space, whereas one would expect nothing.
The problem is fixed in a general way in master, but here we propose
a simpler one, where the spaces that we keep are the ones at the end
of the sequence of spaces.
Part of #11412.
When change tracking is active, it may happen that spaces are marked
as deleted instead of being removed. Therefore it is better to measure
the change of size of the paragraph to know how to offset the cursor.
Moreover, it the cursor was strictly after the start of the sequence
of spaces, we ensure that it is still the case.
This commit is _not_ a backport from master, which has diverged.
Part of bug #11412/
Remove special handling of spaces at end of paragraph. Now they are
handled like interword spaces by both DEPM methods.
Fix off-by-one error in loop when testing for end of paragraph.
Part of bug #11412.
(adapted from commit c00234503f)
Now we search in priority with the GUI language, and then the
language(s) specified in the LANGUAGES environment variable.
Preoviously, the GUI language would only be considered when
LANGUAGES was not set (which was a bug).
Take this opportunity to remove old compatibility code from 2007.
(cherry picked from commit e203bf519b)
When splitting parameters at commas, take into account that
commas inside curly braces are not parameter separators.
(cherry picked from commit 6316b9b7ae)
