- rename the lfun to href-insert.png
- rename the files to Hyperlink...
- the former URLUi produces now \href commands (hyperref)
Only missing thing is the lyx2lyx conversion routine - this will be done by Richard
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@20950 a592a061-630c-0410-9148-cb99ea01b6c8
former now
needed packages needed packages
--- babel
hyperref hyperref
LyX-specific stuff LyX-specific stuff
user preamble user preamble
babel ---
This is needed because hyperref should be loaded after babel but has to be loaded before the LyX-specific stuff. The LyX-specific stuff has to be loaded before the user preamble.
It shouldn't harm to load babel before the user preamble, I even think this is an advantage because many packages need the loaded babel for translations and the users are able to change babel translation.
The new scheme compile fine with all LyX docs and my German math manual. When you have an example where this scheme doesn't work, please shout!
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@20508 a592a061-630c-0410-9148-cb99ea01b6c8
BufferParams.cpp: move the hyperref call to the right position
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@20431 a592a061-630c-0410-9148-cb99ea01b6c8
That makes another simplification both possible and desirable. For some reason, whenever you change the Document Class combobox in Document Settings, LyX tries to read whatever you choose _before_ you try to hit "Apply". Why? I see no good reason. You get the warning earlier that way, but maybe you weren't going to try to load it anyway and were going to change your mind. So I have removed that behavior, in which case you'll get the warning when you try to apply the parameters. This means we can also remove ControlDocument::loadTextclass().
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@19965 a592a061-630c-0410-9148-cb99ea01b6c8
Design goal: Allow the use of layout "modules", which are to LaTeX packages as layout files are to LaTeX document classes. Thus, one could have a module that defined certain character styles, environments, commands, or what have you, and include it in various documents, each of which uses a different document class, without having to modify the layout files themselves. For example, a theorems.module could be used with article.layout to provide support for theorem-type environments, without having to modify article.layout itself, and the same module could be used with book.layout, etc.
This patch adds the backend. The ModuleList class holds a list of the available modules, which are retrieved from lyxmodules.lst, itself generated by configure.py. There are two LFUNs available: modules-clear and module-add, which do the obvious thing; you can test by typing these into the minibuffer, along with the name of one of the available modules: URL (a CharStyle), Endnote (a Custom Inset), and---with the spaces---End To Foot (View>LaTeX and look at the user preamble), which are themselves in lib/layouts. There are some others, too, that allow theorems to be added to classes like article and book.
The GUI will come next.
Issues: (i) The configure.py script could be improved. It'd be nice, for example, if it tested for the presence of the LaTeX packages a particular module needs. But this would mean re-working the LaTeX script, and I don't know how to do that. Note that at present, the packages are ignored. This will change shortly. (ii) I've used std::string in LyXModule, following what seemed to be a precedent in TextClass. If some of these should be docstrings, please let me know, and I'll change them. (iii) There is at present no distinction between LaTeX and DocBook modules. Should there be? That is: Should there be modules that are available when the document class is a LaTeX class and others that are available only when it is DocBook? Or should there just be one set of modules? Each module can of course indicate for what it is suitable in its description.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@19893 a592a061-630c-0410-9148-cb99ea01b6c8
Design goal: Allow the use of layout "modules", which are to LaTeX packages as layout files are to LaTeX document classes. Thus, one could have a module that defined certain character styles, environments, commands, or what have you, and include it in various documents, each of which uses a different document class, without having to modify the layout files themselves. For example, a theorems.module could be used with article.layout to provide support for theorem-type environments, without having to modify article.layout itself, and the same module could be used with book.layout, etc.
This first patch does some reworking of the infrastructrue. We need to distinguish between the TextClass that a particular document is using and the layout of that document, since modules, in particular, can modify the layout. The solution adopted here is to add a TextClass pointer to BufferParams, which will hold the layout. The layout itself is then constructed from the TextClass the document is using. At present, this is completely trivial, but that will change when modules are added.
The pointer in question is a boost::shared_ptr. This is needed because CutAndPaste saves a copy of the layout with each cut or copied selection. We cannot assume the selection vanishes when the document is closed, so there are two options: (i) keep a list of all the layouts that have ever been used by any document; (ii) used some kind of smart pointer. The latter seems preferable, as the former would waste memory. More importantly, the use of a smart pointer allows modules to be modified on disk and then reloaded while LyX is running, and it will eventually allow the same for layout files.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@19756 a592a061-630c-0410-9148-cb99ea01b6c8
* src/Changes.cpp:
* src/support/userinfo.cpp:
* src/Paragraph.cpp:
* src/Changes.h:
* src/Buffer.cpp:
* src/Paragraph.h:
* src/BufferParams.cpp: do not save the name of authors
in LyX documents, who have not made a single change in
change tracking mode
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@19019 a592a061-630c-0410-9148-cb99ea01b6c8
- Split the language Arabic into "arabic_arabi" that uses the arabi-package and "arabic-arabtex" that uses the arabTeX-package to typeset Arabic. This is needed because both packages have some advantages over the other people need.
(This change is a consequence of a long and fruitful discussion with Mostafa, Dov, and me.)
Patch by Dov and me.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@18887 a592a061-630c-0410-9148-cb99ea01b6c8
- Bufferparams.cpp: set correct font encoding for Farsi
- lib/languages: define quotation marks for Farsi
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@18858 a592a061-630c-0410-9148-cb99ea01b6c8
* src/graphics/PreviewLoader.cpp:
- make member writeEncodingPreamble void.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@18543 a592a061-630c-0410-9148-cb99ea01b6c8
* src/BufferParams.{cpp,h} (writeLaTeX):
- move inputenc generation to an own function,
writeEncodingPreamble
* src/graphics/PreviewLoader.cpp (startLoading):
- use the inputenc command and encoding of the buffer
by using the aforementioned new function.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@18538 a592a061-630c-0410-9148-cb99ea01b6c8
introduce 'semantic' TeX commands \lyxinserted and \lyxdeleted in order to decouple change tracking
output from dvipost. Raise user warning if dvipost is not installed (i.e. no changes are shown in TeX output)
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@18237 a592a061-630c-0410-9148-cb99ea01b6c8
Introduces new encodings for the CJK-languages.
The CJK-languages can now be selected from LyX's menu.
For remaining small problems, see the thread "Help needed for bug 3043" on the devel-list.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@18216 a592a061-630c-0410-9148-cb99ea01b6c8
This is a part of the fix for bug 3043.
I got the OK from Georg, that this patch doesn't introduce conflicts as it only sets the infrastructure.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@18206 a592a061-630c-0410-9148-cb99ea01b6c8
- add new encoding utf8-plain for the sake of XeTeX users (bug 3526)
* src/BufferParams.cpp:
- implement new encoding (skip inputenc)
- fix logic error with thailatex
* src/Buffer.cpp:
* lib/lyx2lyx/LyX.py:
* lib/lyx2lyx/lyx_1_5.pyx:
* development/FORMAT:
- format increment to 267
- reset encoding to utf8 on reversion.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@18198 a592a061-630c-0410-9148-cb99ea01b6c8
Please note that method B_ (translate text to buffer language) is presently broken (at least on Windows)!
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@18143 a592a061-630c-0410-9148-cb99ea01b6c8
