lyxfind.cpp(findNextChange, findPreviousChange, findChange, selectChange): factor the change-selection part out of the change-finding part
Text.cpp (acceptOrRejectChanges): call only selectChange
The problem is the use of cursor movement methods to update cursor.
Cursor::forwardPos() steps into insets, which is not always what we
want. The problem here is that there is a math inset just after the
accepted change, and that the cursor steps into it for some reason.
This code is a nightmare anyway.
Fixes: bug #9145
The two fixes here a obviously right, although it is not clear why they are sufficient to fix the bug. Anyway I cannot reproduce any crash with it.
* the first part just conditions a whole if/else to change_next_pos.changed(). Originally, only the if branch was concerned.
* the second part is to avoid calling CursorSlice::backwardPos() when position is 0. Doing this leads to an assertion.
each failure.
There are several places I was not sure what to do. These are marked
by comments beginning "LASSERT:" so they can be found easily. At the
moment, they are at:
Author.cpp:105: // LASSERT: What should we do here?
Author.cpp:121: // LASSERT: What should we do here?
Buffer.cpp:4525: // LASSERT: Is it safe to continue here, or should we just return?
Cursor.cpp:345: // LASSERT: Is it safe to continue here, or should we return?
Cursor.cpp:403: // LASSERT: Is it safe to continue here, or should we return?
Cursor.cpp:1143: // LASSERT: There have been several bugs around this code, that seem
CursorSlice.cpp:83: // LASSERT: This should only ever be called from an InsetMath.
CursorSlice.cpp:92: // LASSERT: This should only ever be called from an InsetMath.
LayoutFile.cpp:303: // LASSERT: Why would this fail?
Text.cpp:995: // LASSERT: Is it safe to continue here?
Using Cursor::setCursor or even BufferView::setCursor is often a bad
idea since it does not run DEPM. In this case (and other cases in
f&replace code) it is better to use BufferView::mouseSetCursor (which
should maybe be renamed...).
When using 'find' and a string is not found, this is not an error or a
surprising event. It is often expected (e.g. after searching through
the whole document for a certain string eventually you will get this
message). The exclamation mark should be reserved for messages that
are unexpected or that need extra attention, such as errors.
The forward flag is used to place the cursor behind the replaced text if it's true.
But it's not correct to move the cursor if it's false. The cursor is in front of the
replacement already after the replaceSelectionWithString() was done.
This is a patch from Scott Kostyshak. The problem it solves is as follows:
1. enable continuous spell check.
2. type a misspelled word and press space so that it has a wavy red underline.
3. right-click and choose a suggested replacement word.
4. press the backspace button.
Result: nothing happens. If you press the backspace button again, then it works as normal.
The selection code was added for the benefit of the spellchecker, but the code has been rewritten since then.
a special method to find \endregexp{}}, not merely the closing brace.
This is now obsolete, so ok to remove this dead code.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@39780 a592a061-630c-0410-9148-cb99ea01b6c8
Corresponding test-case needed a fix as well and now it is passed.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@39518 a592a061-630c-0410-9148-cb99ea01b6c8
Added corresponding regression tests findadv-re-01 and -02 for finding these special characters.
Unfortunately, braces {} are a little bit special and don't work yet. Added findadv-re-03 regression test to not forget about this case.
This goes along the line of fixing issues reported by Andrew Parsloe and summarised as #7638.
Last note: Still there will be cases when the Advanced F&R won't work, especially if the text to be found and/or the search pattern is preceded by backslashes or others.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@39135 a592a061-630c-0410-9148-cb99ea01b6c8
For example, this wasn't allowing to match '\beta\alpha' in the sequence '\alpha\beta\alpha', as
in the accompanying regression test-case (added case for ignore-format off).
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@38888 a592a061-630c-0410-9148-cb99ea01b6c8
For example, this wasn't allowing to match '\beta\alpha' in the sequence '\alpha\beta\alpha', as
in the accompanying regression test-case.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@38883 a592a061-630c-0410-9148-cb99ea01b6c8
Added accompanying regression tests for displayed math and numbered equations.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@38860 a592a061-630c-0410-9148-cb99ea01b6c8
For example, before this footnotes were not correctly found.
Added also accompanying regression test.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@38846 a592a061-630c-0410-9148-cb99ea01b6c8
BufferView::dispatch(), and the screen update is done properly there.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@38779 a592a061-630c-0410-9148-cb99ea01b6c8
Indeed, unchecking ignore format in that scenario was not matching anyway while searching.
This patch fixes that behavior.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@37943 a592a061-630c-0410-9148-cb99ea01b6c8
counting when exporting to latex. This is done for the code comprised
between \begin{document} and \end{document}, while the preamble code
still needs manual calls to TexRow::newline() for registering new lines.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@37584 a592a061-630c-0410-9148-cb99ea01b6c8
just by their file-name, and directly accessed there.
All string/latex exporting of those buffers is handled on the Model
side (lyxfind.cpp) according to the selected options.
Fixed bugs when searching with ignore-format disabled material
in the middle of a paragraph, and when using regular expressions.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@37549 a592a061-630c-0410-9148-cb99ea01b6c8
blank lines may be inadvertently output. This is achieved by using two
special iomanip-like variables (breakln and safebreakln) in the lyx::
namespace. When they are inserted in the stream, a newline is output
only if not already at the beginning of a line. The difference between
breakln and safebreakln is that, if needed, the former outputs '\n'
and the latter "%\n".
In future, the new class will also be used for counting the number of
newlines issued. Even if the infractrure for doing that is already in
place, the counting is essentially still done the old way.
There are still places in the code where the functionality of the
class could be used, most probably. ATM, it is used for InsetTabular,
InsetListings, InsetFloat, and InsetText.
The Comment and GreyedOut insets required a special treatment and a
new InsetLayout parameter (Display) has been introduced. The default
for Display is "true", meaning that the corresponding latex
environment is of "display" type, i.e., it stands on its own, whereas
"false" means that the contents appear inline with the text. The
latter is the case for both Comment and GreyedOut insets.
Mostly, the only visible effects on latex exports should be the
disappearing of some redundant % chars and the appearing/disappearing
of null {} latex groups after a comment or lyxgreyedout environments
(they are related to the presence or absence of a space immediately
after those environments), as well as the fact that math environments
are now started on their own lines.
As a last thing, only the latex code between \begin{document} and
\end{document} goes through the new class, the preamble being directly
output through odocstream, as usual.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@37360 a592a061-630c-0410-9148-cb99ea01b6c8
(when replacing text which is longer than the replaced contents in math mode and similar).
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@37335 a592a061-630c-0410-9148-cb99ea01b6c8
- In GuiApplication::dispatch, do not call markDirty() for lfuns that are not ReadOnly
- In Undo::Private::recordUndo, call markDirty(). The indicator of dirtyness is now the existence of an undo element.
- In lyxfind, remove several markDirty calls that are not needed anymore.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@36772 a592a061-630c-0410-9148-cb99ea01b6c8
involving the messages and will also help sort out some dispatch stuff.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@35649 a592a061-630c-0410-9148-cb99ea01b6c8
dispatch behavior, but can't understand this code as it is. Why isn't
there any documenation here?
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@35635 a592a061-630c-0410-9148-cb99ea01b6c8
DispatchResult to store a flag that tells us whether we need a buffer
update or not.
So: If you find a missing one, go to an appropriate place in the
dispatch and call cur.forceBufferUpdate() or, if you don't have a cursor
but do have a DispatchResult, call dr.forceBufferUpdate().
There is one remaining call I could not move, in
TextMetrics::redoParagraph. But this looks like an emergency call when
the macro context has not been set. There are also a couple calls that
are connected with buffer creation that I commented out, since the same
call is done again almost immediately. But I'm not positive about those.
Now the nice thing would be to do the same for updateMacros().
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@34826 a592a061-630c-0410-9148-cb99ea01b6c8
Now, when scope includes multiple documents, the switch_buffer LFUN is only issues if buffer actually changes.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@33812 a592a061-630c-0410-9148-cb99ea01b6c8
a lot of simplification is possible. Except some instability period...
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@33389 a592a061-630c-0410-9148-cb99ea01b6c8
-) if a selection exists, and it matches, then it is replaced;
-) next match is searched for and, if found, it is selected.
After a replace, next match is searched for only beyond the replaced text
(and not inside the replaced text).
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@33267 a592a061-630c-0410-9148-cb99ea01b6c8
