This makes the defaults of Inset::inheritFont() and Inset::resetFontEdit()
compatible. There is no user visible change except for the Chunk inset which
does not produce invalid LaTeX after editing operations anymore.
This is the safe version for 2.1.0, for later there are still open questions:
- All insets with ResetsFont true should be audited: Is this really needed,
or do they show similar editing problems as the Chunk inset?
- Does inheritFont() need to be customizable in the layout file as well?
- Is resetFontEdit() != !inheritFont() needed at all?
I did not use change tracking for the docs, since I updated all existing
translations.
so we can write a limited amount when using this for TOC and
tooltip output.
This should solve the problem with slowness that Kornel noticed,
which was caused by our trying to write an entire plaintext
bibliography every time we updated the TOC. We did that because
he had a bibliography inside a branch, and we use plaintext for
creating the tooltip that goes with the branch list.
Other related bugs were fixed along the way. E.g., it turns out
that, if someone had an InsetInclude inside a branch, then we would
have been writing a *plaintext file* for that inset every time we
updated the TOC. I wonder if some of the other reports of slowness
we have received might be due to this kind of issue?
preparatory to fixing #7080. Note that mathed uses the same routine, but
for a completely different purpose, so I did not rename it there. I have
seen no difference in behavior after testing, e.g., opening and
exporting Math.lyx, and also re-saving it and looking at the diff.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@38109 a592a061-630c-0410-9148-cb99ea01b6c8
resetFontEdit(). The former is used for on-screen and export formatting,
and the latter is used for interactive editing.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@37761 a592a061-630c-0410-9148-cb99ea01b6c8
counting when exporting to latex. This is done for the code comprised
between \begin{document} and \end{document}, while the preamble code
still needs manual calls to TexRow::newline() for registering new lines.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@37584 a592a061-630c-0410-9148-cb99ea01b6c8
blank lines may be inadvertently output. This is achieved by using two
special iomanip-like variables (breakln and safebreakln) in the lyx::
namespace. When they are inserted in the stream, a newline is output
only if not already at the beginning of a line. The difference between
breakln and safebreakln is that, if needed, the former outputs '\n'
and the latter "%\n".
In future, the new class will also be used for counting the number of
newlines issued. Even if the infractrure for doing that is already in
place, the counting is essentially still done the old way.
There are still places in the code where the functionality of the
class could be used, most probably. ATM, it is used for InsetTabular,
InsetListings, InsetFloat, and InsetText.
The Comment and GreyedOut insets required a special treatment and a
new InsetLayout parameter (Display) has been introduced. The default
for Display is "true", meaning that the corresponding latex
environment is of "display" type, i.e., it stands on its own, whereas
"false" means that the contents appear inline with the text. The
latter is the case for both Comment and GreyedOut insets.
Mostly, the only visible effects on latex exports should be the
disappearing of some redundant % chars and the appearing/disappearing
of null {} latex groups after a comment or lyxgreyedout environments
(they are related to the presence or absence of a space immediately
after those environments), as well as the fact that math environments
are now started on their own lines.
As a last thing, only the latex code between \begin{document} and
\end{document} goes through the new class, the preamble being directly
output through odocstream, as usual.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@37360 a592a061-630c-0410-9148-cb99ea01b6c8
of things like:
pit.push_back(CursorSlice(*this));
which I've had to change to:
pit.push_back(CursorSlice(const_cast<InsetCaption &>(*this)));
and similarly in a few other places.
If anyone thinks we should instead have:
explicit CursorSlice(Inset const &);
then we can also do that.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@37192 a592a061-630c-0410-9148-cb99ea01b6c8
that also makes sure it doesn't do more work than it needs to do, by
limiting the size to 40 characters. Previously, InsetBranch::addToToc()
would have added a string representing the entire contents of the
branch! It's hard to imagine that having to recalculate that sort of
thing doesn't cause some problems with speed, especially in documents
with lots of notes and branches and such.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@36974 a592a061-630c-0410-9148-cb99ea01b6c8
to be passing the BiblioInfo structure around this way. (That's an old
holdover.) That lets us get rid of the non-const masterBibInfo() again.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@36697 a592a061-630c-0410-9148-cb99ea01b6c8
fail e.g., of URLs in math, since tocString() is called by
Paragraph::asString() to give us the contents of insets. Probably, I was
misled by the name, and the comment in Inset.h. That means, at least,
that this method is misnamed, but it probably means we do the wrong
thing in other cases.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@36517 a592a061-630c-0410-9148-cb99ea01b6c8
it->fillWithBibKeys(d->bibinfo_, it);
This could be useful later, if we decide to try to do the work that
fillWithBibKeys did from updateLabels().
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@35106 a592a061-630c-0410-9148-cb99ea01b6c8
DispatchResult to store a flag that tells us whether we need a buffer
update or not.
So: If you find a missing one, go to an appropriate place in the
dispatch and call cur.forceBufferUpdate() or, if you don't have a cursor
but do have a DispatchResult, call dr.forceBufferUpdate().
There is one remaining call I could not move, in
TextMetrics::redoParagraph. But this looks like an emergency call when
the macro context has not been set. There are also a couple calls that
are connected with buffer creation that I commented out, since the same
call is done again almost immediately. But I'm not positive about those.
Now the nice thing would be to do the same for updateMacros().
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@34826 a592a061-630c-0410-9148-cb99ea01b6c8
This is also in preparation of a decent fix for bug #3900.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@34347 a592a061-630c-0410-9148-cb99ea01b6c8
For a displayed equation, the height is artificially increased by a displayMargin() in InsetMathHull::metrics if it is a displayed equation and there is a preview.
This extra height is not covered by the preview image and what one can see is the background as drawn by the MathHull inset. The color of this background should be either Color_mathbg or Color_background depending on whether the preview is shown or not.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@32560 a592a061-630c-0410-9148-cb99ea01b6c8
as to allow us to call the routine when we are preparing for output and
so to do certain things we might not want to do every time.
This is an abuse of updateLabels(), in a way, but updateLabels() long
ago became the general recurse-through-the-Buffer routine, and to
implement the sort of thing I want to do here in validate(), say, much
of the code in updateLabels()---in particular, the counter-update
code---would have to be duplicated. So I believe this is the best, and
easiest, way to go.
Actual use of the new argument will follow.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@32318 a592a061-630c-0410-9148-cb99ea01b6c8
Math manual loads and save correctly it seems but expect some instability period.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@31898 a592a061-630c-0410-9148-cb99ea01b6c8
accepting changes in a clipboard copy (CutAndPaste.cpp), we set the buffer
of insets (and we reset them later).
Doing this makes sense because we know this is the only operation on these
out-of-document paragraphs that will require access to a buffer.
Also, this commit gets rid of one explicit test against ERT_CODE and
LISTING_CODE.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@30623 a592a061-630c-0410-9148-cb99ea01b6c8
Basically, insets in cut stack do not have a buffer, and therefore cannot
acess to buffer parameters. What is annoying here is that acceptChanges
requires this buffer params only to be able to read a font in moveItem,
in order to read the buffer language, and I doubt this is really needed...
Another change in this patch is that Inset::getLayout now returns a
plainLayout when the inset does not have a buffer_. This fixes a remaining
crash where dEPM reads isFreeSpacing() for an inset in the clipboard, but
this looks like a fragile situation. And it will not do the right thing when
doing depm in a freespacing inset.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@30605 a592a061-630c-0410-9148-cb99ea01b6c8
is commented out, so that the documentclass is queried every time instead of
using the layout_ cache. For now I have kept the setLayout calls, but they are
inoperant.
Other changes:
* remove non-const usePlainLayout methods
* move InsetCollapsable::allowSpellCheck and allowMultiPar to InsetText
* move InsetCollapsable::isFreespacing and forceLTR to Inset
Freespacing support could be moved to insettext, but I have to check who
uses it.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@30549 a592a061-630c-0410-9148-cb99ea01b6c8
Get rid of Inset::getLayout(BufferParams), since all insets have access to
their own buffer. Inset::getLayout() does the same now.
Get rid of InsetCollapsable::getLayout(BufferParams) too, and remove most references to InsetCollapsable::layout_. For now IC::getLayout() still returns layout_, but the idea is to change this (provided there is no performance problem).
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@30530 a592a061-630c-0410-9148-cb99ea01b6c8
6047: Lyx 1.6.3 unable to typeset the third chemical equation of the
file mhchem.lyx (package mhchem)
4043: mhchem support
5394: support for the mhchems's \ce command
The \ce and \cf insets are text mode environments that allow entering
spaces and mathmode commands. LyX leaves them alone and doesn't try to
be smart, i.e., the behaviour is exactly the same we had in the old days
with text-in-math mode environments, before the introduction of the
\ensuremath and \lyxmathsym macros. This means that in those environments
one has to know what he is doing, as LyX will not offer any protection.
The hack of enclosing \ce and \cf in a \text{} environment in order to
be able to enter spaces is no longer necessary.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@30338 a592a061-630c-0410-9148-cb99ea01b6c8
routines, one that allows us to "defer" certain material, e.g., a float
that ought to appear in a div but can't simply be put into the middle
of a paragraph.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@30079 a592a061-630c-0410-9148-cb99ea01b6c8
* Remove the EDITABLE enum,
* add functions hasSettings() for all insets.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@29375 a592a061-630c-0410-9148-cb99ea01b6c8
for entering math accents, such that an umlauted A is translated as \ddot{A},
for example.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@26577 a592a061-630c-0410-9148-cb99ea01b6c8
* src/Inset.h:
- new member content Alignment that indicates whether the content
of text insets should be displayed with a specific alignment
* src/TextMetrics.cpp:
- handle inset's contentAlignment
* src/insets/InsetTabular.{cpp,h}:
- set contentAlignment for tabular cells.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@26380 a592a061-630c-0410-9148-cb99ea01b6c8
For the record, this developer is sorry that the problems with this code were not noticed much earlier. It's not fun to do so much work and then have it all reverted.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@24373 a592a061-630c-0410-9148-cb99ea01b6c8
"*supported" methods maybe should be merged with a bit-enum as return value.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@23776 a592a061-630c-0410-9148-cb99ea01b6c8
EmbeddedFile::enable() and EmbeddedFiles::enable() to differentiate different usages.
A member variable bibfiles_ is added to InsetBibtex because it is not efficient to obtain
EmbeddedFileList each time from params()['bibfiles'] and params()['embed'].
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@23576 a592a061-630c-0410-9148-cb99ea01b6c8
* Inset and derived class: get rid of getLabelList()
* BufferView::gotoLabel(): Speed up and simplify by using the tocBackend.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@23541 a592a061-630c-0410-9148-cb99ea01b6c8
* Inset::validate(): renamed to initView()
* InsetCommand:
- get rid of unneeded refresh() and updateButtonLabel_
- setParams(): call initView()
* InsetRef:
- implement initView()
- screenLabel(): transfer code to updateLabels()
- addToToc(): prefix name with BROKEN if the reference is broken.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@23417 a592a061-630c-0410-9148-cb99ea01b6c8
