This avoids some duplicate code. Note that the return value of
Paragraph::getAlign had to be changed. I suspect it was set to char to
avoid reading one header file in Paragraph.h.
LyX assumes that everything in \lyxdeleted is struck out by ulem
and increases the corresponding counter. However, deleted display
math material is struck out using tikz. As we also take into
account the deletion of underlined display math (in order to
properly position such material vertically), we have to take
care that the count is correct.
It should be now possible underlining or striking out any kind
of math inset containing any math construct indigestible to ulem.
While this was already possible for inline math insets, they could
have break if an aligned environment was used, for example.
This is now possible also for diplay math. Even if this can be
nonsensical and not visually perfect, at least no latex errors
should be generated if one tries to.
Font changes are brought inside the \lyxdeleted macro, just before
outputting the latex code for the math inset. The inset writes a
signature before itself and this is checked by \lyxsout for recognizing
a display math. So, the font changes confuse \lyxsout, which also
swallows the first macro at the very start of \lyxdeleted. The result
is that the font changing command is not seen by latex and \sout is also
used to further strike out the formula already striked out by tikz.
This commit makes sure that the expected signature actually appears
just after the opening brace of \lyxdeleted. It also accounts for a
paragraph break occurring just before the math inset, in order to not
introduce too much vertical space, which is noticeable when using
larger font sizes.
Showing deleted display math by enabling "Show Changes in Output" was
only possible with dvi (through dvipost). Although LyX strikes out
such formulas on screen, it was impossible obtaining an output
directly using pdflatex (or other engines producing pdf) because
ulem cannot cope with display math material and gives errors.
The solution is to strike out by ourselves such deleted formulas.
I took into account several options. One of them would produce
an output similar to dvipost (which strikes out each element), but
would have required much more changes in the output routines.
Eventually, I opted for using tikz, which gives a more clean
output (as it requires to simply adding a preamble and a postamble
to the latex code of any displayed math, instead of a mark up
tailored to each particular math construct). The look of the pdf
output is similar to the way LyX strikes out the equations on screen.
This enables error reporting for the preamble, provided the preamble is written
using the new InPreamble layouts.
In the future, I find it preferable to deprecate the usual preamble in favour of
InPreamble layouts rather than implementing error reporting for the usual
preamble. This requires some improvements to code editing in the buffer view
first (line breaking behaviour, syntax highlighting).
texstring is a pair of a docstring and a corresponding TexRow. The row count in
the TexRow has to match the number of lines in the docstring.
otexstringstream is an output string stream that can be used to create
texstrings (i.e. it's an odocstringstream that records the TexRow information
and let us extract a texstring from it).
texstrings can be passed around and output to otexstream and otexrowstream,
which produces an accurate TexRow information by concatenating TexRows.
dealing properly with the paragraph separator tag.
We really need to use that tag as a kind of general marker for which
tags we're responsible for in a given paragraph and which tags we are
not. So the changes to InsetText.cpp use the tag as that kind of marker.
Note that, as of this commit, the User Guide again exports without any
kind of error. I haven't yet checked the other manuals.
This fixes bug #8022.
The initial values for maxasc and maxdes (renamed from maxdesc) is obtained as a maximum of max ascents/descents of all row elements.
This allows to get rid of Paragraph::highestFontInRange and FontList::highestInRange.
Some auxilliary variables declarations are also moved to where they are needed.
(#8738)
For efficiency, we add a new flag to the buffer indicating when changes are
present. This flag is updated at each buffer update, and also when explicitly
requested via a dispatch result flag.
This was a regression of 8aa37c43. I did not take into account that end_pos
could be -1, so the code that checked whether a pair of braces needs to be
inserted between two hyphens did not work for that case. Now we check for
the length of text_, which should be done anyway, and only take end_pos into
account when it is not -1.
There are two regressions that are fixed here:
* empty rows at the end of a paragraph (think after newline at end of
paragraph or empty line in Verbatim) do not have an end-of-par
marker. This is fixed by removing the early return in breakRow and
letting the whole function be executed. This requires to relax an
assertion in Paragraph::fontSpan. It makes sense here to query
position at the end of the paragraph.
* a newline at the end of a paragraph will be followed by and
end-of-par marker. This is fixed by skipping the end-of-par marker
when a new row has been requested.
Unfortunately the footmisc package does not work together with hyperref:
Before 0bf8b8a1, a footnote in a section title was created as a link in pdf
outpout, after 0bf8b8a1 ist was no link anymore. For now we revert to the old
code, and wait until the footmisc and hyperref packages are made compatible.
Prevent encoding changes whenever the TeX engine is XeTeX or LuaTeX,
as XeTeX/LuaTeX use only one encoding per document:
* with useNonTeXFonts: "utf8plain",
* with XeTeX and TeX fonts: "ascii" (inputenc fails),
* with LuaTeX and TeX fonts: only one encoding accepted by luainputenc.
+1 no needless encoding switches
+1 runparams.encoding matches the correct encoding at any time
+1 less complicated code.
-1 there may still be problems with CJK (possibly impossible to
solve for Xe/LuaTeX with TeX fonts).
For LuaTeX & TeX fonts, the complete document uses the encoding
of the global document language.
See also #9740.
Actually, the changed tests were used to prevent overwriting the encoding
changed in Buffer::writeLaTeX with a language-default encoding.
This is still required for XeTeX with TeX-fonts unless a proper solution is found.
Documents with more than one encoding and TeX-fonts fail with LuaTeX,
as "luainputenc" can only handle one encoding.
With inputenc == "auto" or "default", the encoding changes with
the language and must be reset after an eventual language switch in insets
or environments (see #6216).
However, whether we need to do this does not depend on 8-bit TeX vs. LuaTeX
but on the possible use of more than one encoding for the document.
With "nonTeXFonts", the encoding is utf8,
LuaTeX with TeX fonts requires encoding handling similar to 8-bit TeX.
(Additionally, the value of "params.inputenc" could be tested: if it is
not "auto" or "default", we have just one common encoding and could skip
the reset as well.) Not sure how much time this saves, though.
Fixes output for 3 of the 4 test lyx-files.
Includes "FIXME"s at places where further action is required to get the XeTeX
export right but I don't know how.
This is preliminary work for extending the cursor<->row tracking to math.
TexRow used to associate, to each row, a location id/pos where id determines a
paragraph and pos the position in the paragraph.
TexRow now associates to each row a list of entries, text or math. A math is a
pair uid/idx where uid will determine a math inset and idx is the number of the
cell.
The analogy id/pos<->inset/idx works better than the analogy id/pos<->idx/pos,
because what matters for the TexRow algorithm(TM) is the behaviour in terms of
line breaks.
This only improves the source view and the forward search, not the error report
and the reverse search (though this could be easily added now).
Use the function support:truncateWithEllipsis() to shorten a docstring with
... at the end. Actually we use U+2026 HORIZONTAL ELLIPSIS instead of "..." when
automatically shortening strings. This is to be consistent with Qt's own
truncation and is much nicer on the screen.
This includes the bugs #9575 and #9572 regarding broken text elision in the
outliner.
Known issues (non-regressions):
* TocBackend::updateItem() should be rewritten to update all TOCs. (#8386)
* "..." should be replaced with … everywhere else on the interface (including
translation strings).
* We should prefer to rely on QFontMetrics::elidedText() to truncate strings
with an ellipsis whenever possible, or an equivalent for the buffer view
dependent on the font metrics. See the warning in src/support/lstrings.h.
These were all flagged by "(style) The scope of the variable 'x' can be reduced."
Narowing the scope improves readability, and if it is in a loop then the
compiler will be clever enough to produce efficient code, we do not need
manual optimization for POD types.
There is a mismatch between the way text is tokenized in Row objects
and the way it is shown on screen. When metrics are computed,
continuous spell checking has not been done yet. Yet, the row painter
explicitly breaks words at spell status boundaries. This creates
problem with a text like "PMP," (see bug #9649), where there is a
negative kerning before the comma.
This is solved by not taking in account spell status when drawing
text, and drawing spell underlines separately.
* replace Paragraph::isSameSpellRange with new method getSpellRange.
* merge RowPainter::paintChars into RowPainter::paintFromPos
* move the actual text painting code into the new paintTextAndSel.
* merge some code from paintFromPos to paintMisspelledMark
* in paintMisspelledMark, scan the string which needs to be annotated
and add dashed line below text marked as misspelled.
Fixes bug #9649.
Previously, LyX did replace some words with typeset logos, and there was no
way to prvent this except putting them, in ERT (bug #4752). Now we have
special insets for these words, and standard text is left alone.
Previously, consecutive dashes in .lyx files were combined to endash and emdash
in some cases, and in other cases they were output as is. This made the code
complicated, and resulted in inconsitencies ((bug #3647).
Now, a dash in a .lyx file is always a dash in the output, for all flavours.
The special handling is moved to the input side, so that you still get an
endash if you type two hyphens. If needed, this can be changed or made
customizable without the need to update the file format again. Many thanks
for the fruitful mailing list dicsussion, which contributed significantly to
the final version.
For exports based on LaTeX, consecutive hyphens are only converted to endash
and emdash if the current font family is not typewriter, and if none of the
parent insets is an IPA inset. Now this is done for XHTML export as well.
This is a patch I originally sent to lyx-devel in 2012 with subject
'Load footmisc.sty instead of using copied code from obsolete stblftnt.sty'.
It now takes all comments into account: It works also if the user loads the
package herself, it can be disabled by providing the footmisc feature in a
layout, and it does not use the ugly \AtBeginDocument{}.
This branch implements string-wise metrics computation. The goal is to
have both good metrics computation (and font with proper kerning and
ligatures) and better performance than what we have with
force_paint_single_char. Moreover there has been some code
factorization in TextMetrics, where the same row-breaking algorithm
was basically implemented 3 times.
Globally, the new code is a bit shorter than the existing one, and it
is much cleaner. There is still a lot of potential for code removal,
especially in the RowPainter, which should be rewritten to use the new
Row information.
The bugs fixed and caused by this branch are tracked at ticket #9003:
http://www.lyx.org/trac/ticket/9003
What is done:
* Make TextMetrics methods operate on Row objects: breakRow and
setRowHeight instead of rowBreakPoint and rowHeight.
* Change breakRow operation to operate at strings level to compute
metrics The list of elements is stored in the row object in visual
ordering, not logical. This will eventually allow to get rid of the
Bidi class.
* rename getColumnNearX to getPosNearX (and change code accordingly).
It does not make sense to return a position relative to the start of
row, since nobody needs this.
* Re-implement cursorX and getPosNearX using row elements.
* Get rid of lyxrc.force_paint_single_char. This was a workaround that
is not necessary anymore.
* Implement proper string metrics computation (with cache). Remove
useless workarounds which disable kerning and ligatures.
* Draw also RtL text string-wise. This speeds-up drawing.
* Do not cut strings at selection boundary in RowPainter. This avoids
ligature/kerning breaking in latin text, and bad rendering problems
in Arabic.
* Remove homebrew Arabic and Hebrew support from Encoding.cpp. We now
rely on Qt to do handle complex scripts.
* Get rid of LyXRC::rtl_support, which does not have a real use case.
* Fix display of [] and {} delimiters in Arabic scripts.
This variable was introduced to guard against any bad consequence of the then-new right-to-left
languages support. Let's be bold and get rid of it altogether!
Now right to left support is always enabled.
This is handled by Qt now.
Note that a small optimization (do not draw text that is to the left
of WorkArea) is removed because it cannot be guaranteed to be exact
anymore. It was probably not very useful anyway, and would become
useless once the RowPainter is rewritten to use Row information.
Update 00README_STR_METRICS_BRANCH.
The statement
if (pos < from + lyxrc.completion_minlength)
triggers a signed vs. unsigned warning. I don't know why this happens, it
could be a MSVC bug, or related to LLP64 (windows) vs. LP64 (unix)
programming model, or the C++ standard might be ambigous in the section
defining the "usual arithmetic conversions". However, using a temporary
variable is safe and works on all compilers.
With the old code, the last word of a paragraph would not be added in
the completion list. The key difference is to pass `from' instead of `pos'
to FontList::fontiterator.
Slight cleanup of the code.
The algorithm used for breaking a paragraph in LaTeX export is changed
for avoiding spurious blank lines causing too much vertical space.
This change is tied to the introduction of a new inset (with two
different specializations) helping in either outputing LaTeX paragraph
breaks or separating environments in LyX. Both of the above goals were
previously achieved by the ---Separator--- layout and can now be
accomplished by the new inset in a more natural way. As an example,
after leaving an environment by hitting the Return key for two times,
a third return automatically inserts a parbreak inset, which is
equivalent to the old separator layout, i.e., it also introduces a
blank line in the output. If this blank line is not wanted, the
parbreak separator can be changed to a plain separator by a right
click of the mouse. Of course, an environment can still be separated
by the following one by using the Alt+P+Return shortcut (or the
corresponding menu key), but now the plain separator inset is used
instead of the old separator layout, such that no blank line occurs in
the LaTeX output.
Old documents are converted such that the LaTeX output remains unchanged.
As a result of this conversion, the old separator layout is replaced by
the new parbreak inset, which may also appear in places where the old
algorithm was introducing blank lines while the new one is not.
Note that not all blank lines were actually affecting the LaTeX output,
because a blank line is simply ignored by the TeX engine when it occurs
in the so called "vertical mode" (e.g., after an alignment environment).
The old ---Separator--- layout is now gone and old layout files using it
are also automatically converted.
Round trip conversions between old and new format should leave a document
unchanged. This means that the new behavior about paragraph breaking is
not "carried back" to the old format. Indeed, this would need introducing
special LaTeX commands in ERT that would accumulate in roundtrip
conversions, horribly cluttering the document. So, when converting a
modified document to old formats, the LaTeX output may slightly differ in
vertical spacing if the document is processed by an old version of LyX.
In other words, forward compatibility is guaranteed, but not backwards.
In the current code each paragraph contains a map<Language,
WordList*>, which means that it contains a full copy of the language
object. Since these objects contain translation tables nowadays, this
is a very bad idea.
This patch simply replaces the Language key by a string.
When loading the Userguide on linux/x86_64, the total memory
consumption decreases from 36.27MB to 31.50MB.
We are not capable of handling two bibitems within one biblio paragraph.
That's why we have functions like Paragraph::brokenBiblio() and
Paragraph::fixBiblio(). So, if we fix the biblio by deleting the second
bibitem, we should not keep it as deleted.
This code caused a crash because the inset was released, but still kept as
deleted.
Fixes-bug: #8646.
Move the cursor in front of a bibitem and press enter.
Paragraph::fixBiblio will insert a new bibitem without a font in the new
paragraph. This will make Paragraph::fontSpan assert because the fontlist_
of the new paragraph is empty.
Using "Font no_font" in case no font was supplied was wrong. Instantiating a font object without specifying the language lead to a font object having the default_language that is hardcoded to "english". See Language::read().
This caused that there were spurious language changes in the LaTeX output
and made some document uncompilable.
This reverts commit 3619954590.
Previously, an empty paragraph would always yield something like:
<div><a id='magicparid-35' /></div>
because we had no way to "defer" the anchor tag. Now this is wrapped
into the div, in effect, and we abandon it all if there's no content.
An iterator is typicall incremented passed the valid data into the 'end'
state. However, if this means that other functions are called with invalid
parameter, we should fix this.
This explains why fontSpan was called with pos==size() while this was not
expected to happen.
This patch reverts partly f5ad0c128a (Jean-Marc Lasgouttes; Get rid of
annoying warning message).
each failure.
There are several places I was not sure what to do. These are marked
by comments beginning "LASSERT:" so they can be found easily. At the
moment, they are at:
Author.cpp:105: // LASSERT: What should we do here?
Author.cpp:121: // LASSERT: What should we do here?
Buffer.cpp:4525: // LASSERT: Is it safe to continue here, or should we just return?
Cursor.cpp:345: // LASSERT: Is it safe to continue here, or should we return?
Cursor.cpp:403: // LASSERT: Is it safe to continue here, or should we return?
Cursor.cpp:1143: // LASSERT: There have been several bugs around this code, that seem
CursorSlice.cpp:83: // LASSERT: This should only ever be called from an InsetMath.
CursorSlice.cpp:92: // LASSERT: This should only ever be called from an InsetMath.
LayoutFile.cpp:303: // LASSERT: Why would this fail?
Text.cpp:995: // LASSERT: Is it safe to continue here?
need the master buffer here, too: in looking up fonts during XHTML
output.
I'm half tempted to pass the master buffer to these routines, though
there are times, I think, when we want the actual buffer: e.g., when
looking up branches.
work we do when calling plaintext() for the purpose of generating
material for the advanced search function.
Here again, not only were we parsing BibTeX files, since Julien's
(sensible) introduction of plaintext output for that inset, but we
were in fact writing (to disk) complete plaintext output for
included files every time we did such a search.
so we can write a limited amount when using this for TOC and
tooltip output.
This should solve the problem with slowness that Kornel noticed,
which was caused by our trying to write an entire plaintext
bibliography every time we updated the TOC. We did that because
he had a bibliography inside a branch, and we use plaintext for
creating the tooltip that goes with the branch list.
Other related bugs were fixed along the way. E.g., it turns out
that, if someone had an InsetInclude inside a branch, then we would
have been writing a *plaintext file* for that inset every time we
updated the TOC. I wonder if some of the other reports of slowness
we have received might be due to this kind of issue?
Fixes bug #7111: Assertion with undo and InsetBibitem
* add Paragraph::brokenBiblio(), with tells whether there is something to fix.
* rename Paragraph::checkBiblio to fixBiblio; simplify it greatly by using
InsetList methods
* In TextMetrics::redoParagraph, call recordUndo before fixBiblio (only when
there is something to fix obviously)
Special care is taken to update cursor only when it makes sense. Note
that there are cases where undo information is not recorded (current
cursor not in the slice where action happens)
While cppcheck did not turn out any suspicious error messages, using
the "performance" flag highlighted several nitpicks in three categories
* do not use it++ for iterators, ++it is better
* do not use size() to test for emptyness, empty() is here
* do not use "const T" as a function parameter, "const & T" is better
I doubt that any of these is a real performance problem, but the code is cleaner anyway.
Math commands need it as well as text commands. At the same time, this
further unifies the checking for termination and fixes cases of wrong
output (e.g. for 0x2005).
* do not terminate macros by {} if not necessary (prevent kerning violation)
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@40891 a592a061-630c-0410-9148-cb99ea01b6c8
- Interpret argument of LFUN_SPACE_INSERT correctly
- Use InsetMathSpace instead of InsetMathSpecialChar for "\ " (bug # 7728)
- Use InsetMathSpace instead of InsetMathChar for ~ (bug # 7728).
This fixes also the display in LyX (previously a literal ~ was displayed).
Using InsetMathSpace enables also the "Insert Formatting" menu entries.
No file format change is needed, since the LaTeX export is unchanged.
Note that there are still some bugs related to spaces in math:
#7746, #7747, #7749, #7842
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@39947 a592a061-630c-0410-9148-cb99ea01b6c8
throwing errors in the case where we are inside a charstyle that itself
uses a font tag, e.g., strong from the logical markup module. This at
least gets rid of most of the errors, and doesn't seem to cause any
other problems.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@38220 a592a061-630c-0410-9148-cb99ea01b6c8
make NOBREAKDASH isLetter()
* Paragraph.cpp (isWord separator):
handle composites with hyphens as one word (i.e., "-" is not a word separator).
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@37946 a592a061-630c-0410-9148-cb99ea01b6c8
Currently, if an inset outputs a newline, the new latex row is still
associated with a previous id/pos. Now, if a latex error occurs before
this newline, we would still highlight everything associated to that
id/pos, even if it is extraneous to the error.
This is avoided by associating the new latex row with the id/pos in
effect right before entering the inset. If an inset does not output
a newline, it is not excluded from the selection, consistent with the
fact that the text of the inset does appear in the error description.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@37903 a592a061-630c-0410-9148-cb99ea01b6c8
Note that View->Source now shows that a character cannot be encoded.
However, the error is still unreported due to bug #7324.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@37791 a592a061-630c-0410-9148-cb99ea01b6c8
resetFontEdit(). The former is used for on-screen and export formatting,
and the latter is used for interactive editing.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@37761 a592a061-630c-0410-9148-cb99ea01b6c8
a special phrase, simply export the segment as normal text. For other
uses of these methods, end_pos is -1, so the original behavior is unaltered.
This allows for finding properly the LyX, LaTeX and other special phrases
with Advanced Find, when ignore format is off.
This complements the other changes made to latex export methods, for
exporting to latex with a given final end position.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@37599 a592a061-630c-0410-9148-cb99ea01b6c8
counting when exporting to latex. This is done for the code comprised
between \begin{document} and \end{document}, while the preamble code
still needs manual calls to TexRow::newline() for registering new lines.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@37584 a592a061-630c-0410-9148-cb99ea01b6c8
blank lines may be inadvertently output. This is achieved by using two
special iomanip-like variables (breakln and safebreakln) in the lyx::
namespace. When they are inserted in the stream, a newline is output
only if not already at the beginning of a line. The difference between
breakln and safebreakln is that, if needed, the former outputs '\n'
and the latter "%\n".
In future, the new class will also be used for counting the number of
newlines issued. Even if the infractrure for doing that is already in
place, the counting is essentially still done the old way.
There are still places in the code where the functionality of the
class could be used, most probably. ATM, it is used for InsetTabular,
InsetListings, InsetFloat, and InsetText.
The Comment and GreyedOut insets required a special treatment and a
new InsetLayout parameter (Display) has been introduced. The default
for Display is "true", meaning that the corresponding latex
environment is of "display" type, i.e., it stands on its own, whereas
"false" means that the contents appear inline with the text. The
latter is the case for both Comment and GreyedOut insets.
Mostly, the only visible effects on latex exports should be the
disappearing of some redundant % chars and the appearing/disappearing
of null {} latex groups after a comment or lyxgreyedout environments
(they are related to the presence or absence of a space immediately
after those environments), as well as the fact that math environments
are now started on their own lines.
As a last thing, only the latex code between \begin{document} and
\end{document} goes through the new class, the preamble being directly
output through odocstream, as usual.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@37360 a592a061-630c-0410-9148-cb99ea01b6c8
that also makes sure it doesn't do more work than it needs to do, by
limiting the size to 40 characters. Previously, InsetBranch::addToToc()
would have added a string representing the entire contents of the
branch! It's hard to imagine that having to recalculate that sort of
thing doesn't cause some problems with speed, especially in documents
with lots of notes and branches and such.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@36974 a592a061-630c-0410-9148-cb99ea01b6c8
no reason not to permit this, and using it with PassThru 1 allows for a
very simple Preamble layout-type that acts as ERT for the premable. Of
course, we do have the preamble in Document>Settings, but that allows
the embedding of preamble code in branches.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@36562 a592a061-630c-0410-9148-cb99ea01b6c8
This introduces an isFullUnicode() function to OutputParams that currently only contains XETEX, but later can also contain other fully unicode-aware backends (LUATEX for instance).
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@36445 a592a061-630c-0410-9148-cb99ea01b6c8
The goal is first to remove explicit testing against ERT_CODE,
and second to allow to define layouts with the same properties as ERT insets.
This commit does not change behaviour
* rename OutputParams::verbatim to pass_thru
* disable encoding switch inside pass_thru layouts
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@35091 a592a061-630c-0410-9148-cb99ea01b6c8
- new function hasDigit
* src/Paragraph.cpp (spellcheck):
- ignore words with digits, as in 1.6 (bug 6493).
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@33395 a592a061-630c-0410-9148-cb99ea01b6c8
- comment out code that makes aspell abort
if a word in an unknown language is being checked
(instead of just skipping this word)
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@33387 a592a061-630c-0410-9148-cb99ea01b6c8
weren't taken into account. So the paragraph id management is now going
back to Paragraph.cpp.
Sorry for the trouble.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@32788 a592a061-630c-0410-9148-cb99ea01b6c8
#6415
Enrico please verify that reverse dvi is fixed.
* Text and InsetText: create two private constructors and transfer some
initialisation code from InsetText.
* Paragraph: id generation is transfered to Text. May be transfered to
Buffer in the future, we'll see.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@32766 a592a061-630c-0410-9148-cb99ea01b6c8
Much of the point of this is to allow us properly to handle what LyX does as:
<em>This is <strong>bold and italic</em> and now just bold.</strong>
We output:
<em>This is <strong>bold and italic</strong></em><strong> and now just bold.</strong>
which is valid.
Note how much easier this would have been if emphasis and boldness were insets
rather than ranges. ;-)
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@32086 a592a061-630c-0410-9148-cb99ea01b6c8
can't just output Standard as <p>, or anything else, because we
have structures like:
this is text <branch>and more text</branch> and more
which would then come out as:
<p>this is text <p>and more text</p> and more</p>
So we use the OutputParam html_in_par to try to signal when we
are already in a paragraph. It is expected that we will need to
do some bug fixing here.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@31753 a592a061-630c-0410-9148-cb99ea01b6c8
THis leads to a big speedup of the buffer-write function (>60%). The goal is to make autosave less noticeable.
This patch should be safe as long as transforming a docstring to utf8 is equivalent to transforming the characters one by one.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@31695 a592a061-630c-0410-9148-cb99ea01b6c8
Now inline SpellChecker is faster than ever. Now, I honestly think that we blow out all the competitors (thunderbird, OO, MSWord, etc) :-)
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@30970 a592a061-630c-0410-9148-cb99ea01b6c8
* no one has to know that the current author has by default id 0,
* avoid unnecessary use of the Type enum.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@30862 a592a061-630c-0410-9148-cb99ea01b6c8
Fixes bug #5690: Hebrew file cannot be exported to dvi or pdf.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@30848 a592a061-630c-0410-9148-cb99ea01b6c8
* Move suggestion searching out of check() and onto suggest().
* Cleanup a bit AspellChecker
* Begin Hunspell support (not tested and does not link yet)
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@30824 a592a061-630c-0410-9148-cb99ea01b6c8
This is a hack necessary because \\textcolor is a bit buggy.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@30773 a592a061-630c-0410-9148-cb99ea01b6c8
This patch makes sure that there are minimal changes when loading and saving a file with change tracking.
- the authors are assigned a buffer_id, such that when the file is saved, they get the same id,
- the authorlist is sorted according to the buffer_id,
- the buffer_id is written to the file in the author list (file format change)
- the ids start with 1, because 0 is internally reserved for the current Author,
- when writing the file, the current author is assigned an id if he didn't already have it.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@30756 a592a061-630c-0410-9148-cb99ea01b6c8
accepting changes in a clipboard copy (CutAndPaste.cpp), we set the buffer
of insets (and we reset them later).
Doing this makes sense because we know this is the only operation on these
out-of-document paragraphs that will require access to a buffer.
Also, this commit gets rid of one explicit test against ERT_CODE and
LISTING_CODE.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@30623 a592a061-630c-0410-9148-cb99ea01b6c8
Basically, insets in cut stack do not have a buffer, and therefore cannot
acess to buffer parameters. What is annoying here is that acceptChanges
requires this buffer params only to be able to read a font in moveItem,
in order to read the buffer language, and I doubt this is really needed...
Another change in this patch is that Inset::getLayout now returns a
plainLayout when the inset does not have a buffer_. This fixes a remaining
crash where dEPM reads isFreeSpacing() for an inset in the clipboard, but
this looks like a fragile situation. And it will not do the right thing when
doing depm in a freespacing inset.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@30605 a592a061-630c-0410-9148-cb99ea01b6c8
Fix the rest of the code, whih implies fixing a few potential bugs where the appendix status was not taken in account.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@30524 a592a061-630c-0410-9148-cb99ea01b6c8
* Counters.cpp (flatLabelString): return a cache of the flattened strings for each used language
* Counters.cpp (theCounter, counterLabel, flattenLabelString): add a lang parameter; in theCounter, populate the cache as needed.
* insets/InsetCaption.cpp:
* insets/InsetFoot.cpp:
* insets/InsetBibitem.cpp:
* insets/InsetCollapsable.cpp:
* Paragraph.cpp:
* Buffer.cpp: pass a language argument to counter methods.
* Paragraph.cpp (translateIfPossible): use the function with same name in gettext.cpp.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@30520 a592a061-630c-0410-9148-cb99ea01b6c8
Paragraph::collectWords() now also collects spellchecker suggested words for inline word completion.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@30240 a592a061-630c-0410-9148-cb99ea01b6c8
NB: I am not sure this escape character preference is something useful to keep. If some language has some special escape characters beside the single quote one we should support that out of the box and not asking the user to define it or them in the preference dialog.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@30210 a592a061-630c-0410-9148-cb99ea01b6c8
- we do not output alignment begin for the default alignment,
so we must not output the end tag (bug 5995)
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@30151 a592a061-630c-0410-9148-cb99ea01b6c8
- do not embrace list items. According to the comment,
this was only done to escape brackets, but brackets
are embraced anyway.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@30112 a592a061-630c-0410-9148-cb99ea01b6c8
routines, one that allows us to "defer" certain material, e.g., a float
that ought to appear in a div but can't simply be put into the middle
of a paragraph.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@30079 a592a061-630c-0410-9148-cb99ea01b6c8
Do not accept the changes in the selection, if it is completely deleted.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@29672 a592a061-630c-0410-9148-cb99ea01b6c8
You'll need to check the continuous spellcheck option in order to test this.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@29465 a592a061-630c-0410-9148-cb99ea01b6c8
are computed recursively to get rid of any \thexxx string by the method
flattenLabelString. The values are cached in Counter objects.
On my mac, the total time (updatelabels+redraw) goes down by 30%. YMMV.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@29342 a592a061-630c-0410-9148-cb99ea01b6c8
