Tweak the algorithm so that a BOX math row element can have some
spacing. To this end, MathRow::before/after do not look at the type of
an element for deciding when to skip it, but rather to its math class.
In the new setting, the spacing algorithm works on all elements, but
skips the MC_UNKNOWN elements as if they were not present. As a
consequence, the two element types BEGIN and END have been replaced by
a single DUMMY (they can be recognized from their class).
To simply the code, add a new `mclass' argument to the
MathRow::Element constructor (default is MC_UNKNOWN).
Macro nesting is now recorded into the macro inset itself. This allows
the ArgumentProxy inset to determine whether it is editable or not by
looking at its macro.
Remove code in the metrics and draw methods of ArgumentProxy: this
code is AFAICS not active anymore, since arguments are linearized into
math rows.
Use Changer idiom to change locally the values of MecticsInfo::base.macro_nesting.
This is a long standing issue, present since the new math macros
inception in version 1.6. It manifests as a display issue when a
macro with optional arguments appears in the optional argument of
another macro. In this case the display is messed up and it is
difficult, if not impossible, changing the arguments as they do not
appear on screen as related to a specific macro instance. It also
manifests as latex errors when compiling, even if the latex output
is formally correct, due to limitations of the xargs package used
to output the macros. Most probably, both aspects have the same
root cause, as simply enclosing in braces the macro and its
parameters solves both issues. However, when reloading a document,
lyx strips the outer braces enclosing a macro argument, thus
frustrating this possible workaround.
This commit solves the display issue by correctly accounting for
macros with optional arguments nested in the argument of another
macro, and circumvents the xargs package limitations causing errors
by enclosing in braces the macros with optional arguments appearing
in the argument of an outer macro when they are output. This means
that when loading an old document with such macros and saving it
again, the macro representation is updated and will have these
additional braces. However, as such braces are stripped by lyx on
loading, there is no risk that they accumulate.
See also this thread:
http://www.mail-archive.com/lyx-devel@lists.lyx.org/msg197828.html
This fixes the "bad keming" of math ERT (in fact wrong metrics) which recently
was worsened by InsetMathChar substitutions and their MathClass spacing.
Also fix a small inefficiency: always prefer:
Changer dummy = (currentMode() == TEXT_MODE)
? pi.base.font.changeShape(UP_SHAPE) : Changer();
over:
Changer dummy = pi.base.font.changeShape((currentMode() == TEXT_MODE)
? UP_SHAPE : pi.base.font.shape());
The former only records and restores a value when the condition is satisfied,
and does not cost anything otherwise.
- Allow using logical values for icon sizes as the standard sizes may
differ among different icon sets
- Do not allow setting sizes smaller than smallIconSize
When the logical sizes differ and the icon set is changed, the correct
sizes are established only after a restart.
Addressing #10481.
This patch adds the new 'needauth' option for converters launching
external programs that are capable of running arbitrary code on behalf
of the user. These converters won't be run unless the user gives explicit
authorization, which is asked on-demand when the converter is about to
be run (question is not asked if the file is cached and calling the
converter is not needed).
The user prompt has a 3rd button so that he/she's not prompted again
for (any converter over) the same document (identified through
buffer->absFileName()).
Two preference options are added:
lyxrc.use_converter_needauth_forbidden disables any converter with
the 'needauth' option, which is meant to force user to an explicit
action via the preferences pane, before being able to use advanced
converters that can potentially bring security threats;
lyxrc.use_converter_needauth enables prompting the user for 'needauth'
converters, or bypasses the check if not enabled, falling back to the
previous behavior.
So, the first option is for maximum security, the second is for
maximum usability.
The current math style should have no impact on \kern1mu. This is another
benefit of a9eb87a8.
Testcase:
\begin{align*}
& \kern1em a\\
& {\scriptscriptstyle \kern1em a}\\
& \kern18mu a\\
& {\scriptscriptstyle \kern18mu a}
\end{align*}
- Adds LFUNs for setting the icon size
- Adds icons sizes to the Toolbars menu
- Uses the Toolbars menu as application context menu
- The context menu can now be user defined in stdcontext.inc
Fixes ticket #10428.
In fact having an extra parameter "bool cond" is no longer useful because it can
now always be emulated with a ternary operator:
Changers dummy = cond ? do_change() : Changer();
* Factor code for easier maintainance.
* Avoid computing metrics several times. This duplication explained the
exponential blowup during the metrics phase for nested fractions (see
b2b87330). This happened in particular when using lyxproofs which heavily uses
nested \dfracs for on-screen drawing.
* Call MetricsBase::changeScript instead of MetricsBase::changeFrac for
\nicefrac and \unitfrac.
Move math style to FontInfo and compute the font sizes for scriptstyle and
scriptscriptstyle according to standard proportions: 0.73 and 0.55.
This is simpler and more accurate. It also fixes the font size of
${\scriptscriptstyle {\textstyle A}}A$ which exposed the limitations of the
previous approach.
There is no reason to reserve pixel space in macros replacement text,
which is not editable. This makes macros more compact and eases the
writing of lib/symbols.
* introduce new InsetMath::drawMarkers and friends that do nothing
when nested inside a macro. This required to move macro_nesting
inside MetricsBase, and to pass MetricsInfo & to metricsMarkers.
* keep track of nesting when drawing rows or macros.
Empty insets should use a minimal amount of space, especially when
they are part of a built-in macro in lib/symbols.
With this change, blue rectangles signal actually editable places.
Empty macros in editable data are shown as grey boxes, but they do not
appear when further nested.
This is done by adding a new type BOX of MathRow::Element object and a
MetricsInfo::macro_nesting that keeps track of macros (and is reset to
0 in editable macro arguments).
* new MathRow class which contains the description of a MathData
object in terms of math class and spacing
+ macros and their arguments used in the MathData object are
linearized (replaced with their contents) so that all math insets
are typeset as a string together. To this end, we introduce a
method addToMathRow to InsetMath and MathData. This method allows
to linearize recursively a MathData object.
+ It is then necessary to set manually the dimension and position of
the macros and arguments.
+ the class class and spacing are computed using the MathClass helpers.
The MathRow data is cached in the MathData object in a bufferview-dependent
way (different dpi for different screens).
* delegate most of the work MathData::metrics/draw to MathRow metrics/draw.
The case of draw is trickier, since many draw() methods rely on their
metrics without any spacing added.
This implements the relevant math typography rules described in the
Appendix G of the TeXbook. More precisely, for each atom
+ the class is computed by implementing rules 5 and 6 of Appendix G
+ the spacing is computed according to the table p. 170
This code is not used at this point.
This done according to the TeXbook. This class replaces the individual
isMathXXX() methods. The mathClass() method (currently unused) is
provided for the following insets:
* InsetMathChar (with a revised list of affected characters)
* InsetMathSymbol: the class is given by the `extra' field
Operators defined in lib/symbols (e.g. \log) are MC_OP
* InsetMathFrac is MC_INNER (except nicefrac and units)
* InsetDelimiters is MC_INNER
* InsetStackrel is MC_REL
* The class of InsetScript is the class of the last element of its
nucleus (yes, it is a hack, but doing it right is more work).
Remove the explicit spacing that was done in the different insets. The spacing
will be reintroduced properly in a forthcoming commit.
* set up a replacement of *, -, and : by the adequate symbols (#9893)
* fix the wrong character selection and operator spacing in \text mode
* hide some internal symbols from the auto-completion.
* Fix spacing in lib/symbols after recent commits about math spacing, as well as
older spacing issues (e.g. \Join).
* InsetMathKern now uses the same em value as other math length commands.
What is nice is that the kerning amount now matches the ones found in the
packages definition (modulo 10mu that lyx currently adds between relations).
Testcase: $\CheckedBox\LEFTcircle\RIGHTcircle\photon\gluon\vcentcolon\dblcolon\Coloneqq\eqcolon\models\hookrightarrow\bowtie\hookleftarrow\Join\APLinv\neq$
This is a long wanted feature, although it does not go all the way to
fix#6604 (private-cut/private-paste).
Additionally, it fixes a crash that can happen when using undefined
branches. This is done by making the action when pasting unknown
branches configurable.
Fixes bug #6570.
An overlong word containing a hyphen could be broken anywhere, instead of after
the hyphen.
Example: compare the line breaking of
aaaaa-aaaaa-aaaaa-aaaaa
with
aaa aaaaa-aaaaa-aaaaa-aaaaa
(with a very narrow window)
This also improves Chinese text in some situations (#10299)
1) Distinguish expanding characters from separators, to fit with Qt's notion of
expanding character which comes from the Unicode std. CountExpanders() is moved
to FontMetrics to fix a discrepancy with the duplicate implementation from
598f7e4a.
2) Make these expanders stretch on-screen proportionally to the em of the font.
If a row mixes large and small text, LyX let us see which spaces are set in the
bigger font.
3) Now that the stretch is defined in ems, add a limit such that an expander
never stretches more than 1.5em to avoid weird and hard to read justified lines.
4) Add a return boolean to setSeparatorExtraWidth for future use.
When \multicolumn{ncol}{align}{content} is parsed and the ncol
parameter is not a numeric value, this parameter is swallowed
and replaced with '1'. Hence, if the file is subsequently saved
a dataloss would occur. With this commit, \multicolumn is not
interpreted when ncol is not a numeric value and is left as is.
See also #10466
It turns out that Cursor::getFont() does not return a fully realized
font in some cases. This patch uses real_current_font instead, which
seems better anyway.
I suspect that all uses of getFont() should be removed, but this is
not code that I know well.
Fixes bug #10478.
This means that, when a string contains high-plane Unicode characters,
the length of a docstring and the corresponding QString will be
different: Qt will encode these characters using several 16bit
characters.
We have additionally to take into account QTBUG-25536, which implies
that sometimes qstring_to_ucs4(toqstr(s)) !=s. It is not clear whether
this bug can be a problem in other places.
Fixes bug #10443.
1. We must always output all (diverging) options, including
default options; if not, default options might get overwritten.
2. Do not output options in \setotherlanguage, since we might have
multiple "other languages" varieties from the same language (such
as naustrian, nswissgerman). And the options are output for the
language switches anyway.
Hence, LaTeXFeatures::getPolyglossiaLanguages() does not have to record
varieties. This was not done correctly anyway, since the map allowed
for one entry per language only.
Math macros can be displayed on screen by providing a different
representation than the one used for latex output. This representation
is actually used by lyx even while it is being updated. This leads to
printing useless error messages on the terminal. For example, a macro
parameter has to be entered as \#1 and, if the macro is already used in
a math inset, lyx prints on terminal the error message "Math parse error:
missing token after \\" as soon as one hits the \ key, followed by
"MathMacroArgument::MathMacroArgument: wrong Argument id: -48" as soon as
one hits the # key. So, this is not a useful information and simply
clutters the terminal output. On the other hand, the input is sanitized
even if one stops input after hitting either \ or #, so that no further
messages are issued. Hence, those error messages are simply pointless.
1/ simplify logic that triggers margin selection painting
2/ fix logic for end of paragraph markers. They are now selected when
there is an end row margin selection.
3/ avoid rounding problems due to int/double conversions.
Also use the exact amount of vertical space TeX adds after a
math display (instead of 1ex) for vertically shifting the box.
We have to use \belowdisplayshortskip here, instead of
\belowdisplayskip, because the math formula is typeset by alone
in a box, and thus there is no following line.
This fixes two particular problems
* with Qt5, it seems that QFontMetrics::width does not return the
correct value for some Arabic text; this patch uses QTextLayout
instead to compute a string width
* Likewise, the undocumented layout flags TextForceRightToLeft and
TextForceLeftToRight do not work with Arabic text; this patch uses
unicode override characters instead.
It might be that the two issues are related. In any case, they do not
happen with latin text where right-to-left direction is enforced. And
they do not happen with Qt4.
Additionally, remove some dead code in GuiFontMetrics::pos2x().
Fixes bug #10436.
LyX assumes that everything in \lyxdeleted is struck out by ulem
and increases the corresponding counter. However, deleted display
math material is struck out using tikz. As we also take into
account the deletion of underlined display math (in order to
properly position such material vertically), we have to take
care that the count is correct.
No newline is written after \begin{document}, such that
the afterParbreak method would return false. This misleads
the code that outputs a display math in an ulem command
to emit a newline command instead of \noindent, causing
latex errors. This occurs only if the math is at the very
start of a document, without anything before it.
- fileformat change
- I could not update the tex2lyx test files because of bug #10440
- maybe the lyx2lyx routine could be improved but since a document can also begin with another layout than "Standard" I could not use the lyx2lyx function put_cmd_in_ert
It should be now possible underlining or striking out any kind
of math inset containing any math construct indigestible to ulem.
While this was already possible for inline math insets, they could
have break if an aligned environment was used, for example.
This is now possible also for diplay math. Even if this can be
nonsensical and not visually perfect, at least no latex errors
should be generated if one tries to.
