This should avoid performance problems related to the window update machinery.
Moreover this fixes a crash introduced by 82808fea when closing a file.
Note that GuiWorkArea::Private already had a read_only_ member, but it
was unused.
Also rename LyXVC::vcname() to LyXVC::vcstatus() since it now contains
directly the UI string to be shown.
Font changes are brought inside the \lyxdeleted macro, just before
outputting the latex code for the math inset. The inset writes a
signature before itself and this is checked by \lyxsout for recognizing
a display math. So, the font changes confuse \lyxsout, which also
swallows the first macro at the very start of \lyxdeleted. The result
is that the font changing command is not seen by latex and \sout is also
used to further strike out the formula already striked out by tikz.
This commit makes sure that the expected signature actually appears
just after the opening brace of \lyxdeleted. It also accounts for a
paragraph break occurring just before the math inset, in order to not
introduce too much vertical space, which is noticeable when using
larger font sizes.
LaTeX refuses to break a line when it is empty. But we have to start
a new line here, otherwise the whole displayed equation would be
typeset as it were inline with previous content. The solution is to
put a zero-length space just before the line break. Moreover, this
is the right thing to do, as it simulates the extra space that is
normally added in this circumstance.
Showing deleted display math by enabling "Show Changes in Output" was
only possible with dvi (through dvipost). Although LyX strikes out
such formulas on screen, it was impossible obtaining an output
directly using pdflatex (or other engines producing pdf) because
ulem cannot cope with display math material and gives errors.
The solution is to strike out by ourselves such deleted formulas.
I took into account several options. One of them would produce
an output similar to dvipost (which strikes out each element), but
would have required much more changes in the output routines.
Eventually, I opted for using tikz, which gives a more clean
output (as it requires to simply adding a preamble and a postamble
to the latex code of any displayed math, instead of a mark up
tailored to each particular math construct). The look of the pdf
output is similar to the way LyX strikes out the equations on screen.
Now that there is a signal to inform the controller when the buffer view has
changed, it is no longer necessary to store a perishable pointer to a buffer
view in the dialog view. (Indeed, it was only really useful for checking whether
the new buffer view pointer was different from the old one.)
TODO: other dialogs should be audited for similar hazards.
This enables error reporting for the preamble, provided the preamble is written
using the new InPreamble layouts.
In the future, I find it preferable to deprecate the usual preamble in favour of
InPreamble layouts rather than implementing error reporting for the usual
preamble. This requires some improvements to code editing in the buffer view
first (line breaking behaviour, syntax highlighting).
texstring is a pair of a docstring and a corresponding TexRow. The row count in
the TexRow has to match the number of lines in the docstring.
otexstringstream is an output string stream that can be used to create
texstrings (i.e. it's an odocstringstream that records the TexRow information
and let us extract a texstring from it).
texstrings can be passed around and output to otexstream and otexrowstream,
which produces an accurate TexRow information by concatenating TexRows.
Note that the lyxrc.document_path variable corresponds to what we
call the "Working directory" in the GUI preferences dialog.
Setting document_path to "." makes it so when LyX is started from a
directory, that directory is the default path for many of LyX's
operations, such as the following:
- new file, new from template
- adding a custom BibTeX file
- GUI compare dialog
- local layout button in document settings
- external material file browser
- graphics browser, include browser
The best guess for where the user wants to save or find files is the
directory the user started LyX from. Before, the default was always
the home directory. If desired, the old behavior can be restored by
changing the default path in Preferences > "Working directory".
This commit takes advantage of 9b64d7bd, which allows the use of a
relative path for path preferences.
The limit of 10% is used in both getStatus() and dispatch() to set a
minimum zoom level. Having it centralized makes the code more
readable and makes changing the minimum less error-prone.
* New virtual functions leftMargin() and rightMargin() to get rid of
drawWithMargin()
* Factor and rewrite code for borders.
* Fix several offset calculations.
Known issues:
* Borders of multicols look too good and do not correspond to the pdf
output. (non-regression)
* Bounding box for Hull (Regexp) not pixel-perfect.
* Bounding boxes of Diagram, XYmatrix, are too tight when there are
borders. Also border should be disabled. (non-regression)
A better solution would be to entirely get rid of this borrowed pointer with
unclear lifetime, but this requires to introduce a new signal for when the
buffer view attached to the GuiView has changed.
Until now this was not done for essentially two reasons. The first
one is that local switches are used for short text insertions, so that
they are unlikely crossing environment boundaries. The second one
is that if we have to close a language at the end of an environment
we would be missing the right termination command. As this last
issue can be overcome by simply storing in the stack the current
nest level with a sign denoting the kind of switch, there is no
reason anymore not to track also local languages switches.
Also factor out some commonly used constructs in order to improve
readability.
If the document language is opened outside of any environement, we risk
not closing it if no other language switch occurs. Indeed, the stack is
emptied only at the end of an enviroment. We could of course also empty
it at the end of the document, but we would have an unnecessary language
switch.
Trying to spare a few cycles by avoiding computing metrics during
screen updates and export. See also 8f86ee74, 72cf7c8f, and e36a8903.
Guillaume will tell whether this also avoids crashing his documents ;)
Some macros defined in the lib/symbols file are classified are texmode.
But the MathMacro class was missing a currentMode method for returning
this information.
When using polyglossia, lyx was making a real mess when changing
language inside nested insets. The \begin{language} and
\end{language} commands were not well paired such that they could
easily occur just before and after the start or end of an
environment. Of course this was causing latex errors such that
"\begin{otherlanguage} ended by \end{environment}".
There may still be some cases I did not take into account.
TexRow now returns a range {start, end} when looking up a particular row.
Reverse-search now selects the whole range instead of simply moving the cursor.
Add an exception to the conversion of "missing character" warnings into errors.
The PGF package deliberately uses the dummy font "nullfont" to suppress output.
Therefore, warnings about missing characters in "nullfont" are really only warnings.
Also updated the comment: "Missing character" warnigns are especially widespread
in XeTeX/LuaTeX but can also happen with "classical" 8-bit TeX.
Feel free to port this to branch.
The title is changed to "LaTeX (pdflatex) Preview", etc. depending on the
format. The actual default format is computed.
The menu name "Source Pane" is replaced by "Code Preview Pane" to better reflect
its purpose.
When resolving biblatex's xdata references, consider that xdata fields
can contain a comma-separated list of keys, not just a single key like
crossref.
In addition to the classic crossref, biblatex introduces xdata
references in order to source-out common data of entries. Entries
that have "xdata = {somekey}" just inherit all fields from the
respective @xdata entry, if the field is not already defined in
the entry itself (just like crossref, with the exception that @xdata
entries themselves are _never_ output on their own). @xdata entries can
themselves inherit to other @xdata entries (ad infinitum). So you can,
for instance, setup an xdata entry for a book series with series name
that inherits an xdata entry with information of the publisher
(publisher, address). Any book of that series would just need to refer
to the series xdata and add the number.
BiblioInfo now checks, in addition to crossrefs, for such xdata
references and inherits missing fields.
Nte that biblatex also introduces an "xref" field as an alternative to
crossref. We must not care about that, since the point of xref is that
it does not inherit fields from the target (just cites that one if a
given number of refs to it exist)
Do not assume that the /systemlyxdir path prefix in \origin refers
to the system directory of the running instance, but check through
some heuristics what the real system dir is. In this way, a document
in the system dir of any other LyX installation is correctly spotted
and the \origin tag properly updated. For example, one can use an
installed version of lyx to edit a document in the lib/doc dir of a
git repo and obtain the same result as when running lyx in place.
Revert to the strategy used at 8f86ee74 but not using mathedWordList
because it may be still uninitialized at load time. Instead, use the
globalMacros method for getting the same info.
There was a thinko at 8ec91e80, because globalMacros always returns
null for user defined macros.
It may happen that mathedWordList is not still updated at load time,
so we would still be using a bogus pointer. Better fetching the
necessary info from the global macro table.
The math macros system is quite complex. Macros are updated during
metrics calculation, so a missing update is very likely to cause a
crash. This commit tries to assure that they are updated at export
time, which also happens when the table of contents is updated.
Moreover, in order to circumvent a possible missing update, when
a math macro is detected we try to avoid using the sym_ member
of the MacroData class, as it may contain bogus values.
Load required package textcomp.
Replace call to non-existent packages textcyr and textgreek with the backup definition of the commands as done by LyX export.
Do not load marvosym (clash with pifont) (LyX does not load the package either).
Remove invalid command \\ascii.
On export, a macro defined in ERT (or not defined at all) is left
in the same environment it is entered. So, don't explicitly insert
it in an ensuremath environment when it is entered in a textmode one.
From Günter [1]:
the difference is the textcommand for ETB which changed from
{\ascii\ETB} to
0x21a8 "\\ETB" "ascii" "force=utf8" # UP DOWN
ARROW WITH BASE
because the former resulted in
l.513 \ascii
\ETB{}
! Undefined control sequence.
[1]
https://www.mail-archive.com/search?l=mid&q=nr48qn%242gb%241%40blaine.gmane.org
Fix problems revealed by hand-compiling an examining the test samples in autotests/export/Unicode-characters/:
* new definitions
* fixed definitions
* "force=utf8" when required
* some IPA symbols fail without the "extraipa" package
* fix direction of "textcommaaboveright"
A math-mode command entered in a text-mode environment is wrapped
in an ensuremath inset, as well as a text-mode command entered in a
math-mode environment is wrapped in a text inset. Who doesn't like
the extra insets can always dissolve them and rely on the wrapping
performed on export.
If the first character in the first cell of an aligned math environment is
'[', and the environment does not use top or bottom vertical alignment,
then LyX did write the '[' unprotected so that it got misinterpreted as
optional argument, both when reading the .lyx file in LyX and when reading
the .tex file in LaTeX => data loss!
The fix is to output an empty optional argument in this case, which is
interpreted as default alignment both by LyX and LaTeX. It would also be
possible to output \[ in the first cell instead, but this would be more
difficult to implement.
The \multicolumn command allows to set vertical lines for individual rows.
These are not yet displayed, but if they are supported one day, the code in
a27ff13663 needs to be adjusted. This change hints at the adjustment.
This is a fixup to commit 39329935. The two fixes are
* add forgotten offset `y' when drawing the line
* in order to have a continuous vertical line, draw from the offset of
the previous row.
Fixes bug #10363.
The window title is built from the current file name and its
mofidication state. We use our own code instead of the automatic title
bar provided when windowFileName() is set because
1/ Qt does not keep the full path name
2/ Qt does not yield a nice application name
The "read only" and "version control" status are shown in the status bar:
* for read only we use the tab read only emblem (with the right size)
* for version control, we show the name of the backend (using a new
vcname() method of the backend).
The iconText() of the view is not updated anymore, since this is
deprecated in Qt5.
Now the external material file dialog shows the file types defined in the
template again. Before this fix it did only show "All files (*)".
I don't know what the old syntax was supposed to do or whether it ever worked
with boost::regex, but with std::regex the new one is correct.
As noted in the log, this commit was a bit radical and needs some
adjustments (which was expected, actually).
Let InsetText do their own background drawing.
Fixes bug #10359.
Before, it could have been the case that
lyx -e pdf2 file.lyx
had exit code 0 even though file.lyx includes a file that exits with
error. If compiled in the GUI a warning was given, but from the
command line exit code it would seem there was no problem. The exit
code for this case is now non-zero and the word "Warning" is now
removed from the message because it should be treated as an error.
An exception is thrown from InsetInclude and is caught in
Buffer::makeLaTeXFile() and added to the error list.
The (similar) use case at #8840 is also fixed by this commit.
buffer-zoom-out can actually zoom in (by giving a positive number as
the argument), so it should only be disabled at the minimum zoom
level if it is indeed zooming out.
Similarly, buffer-zoom-in can zoom out, so it should be disabled if
the user is at the minimum zoom and it is called to zoom out.
This commit amends 8884c404.
Replace the member reference to FuncRequest in Action.cpp with a
shared_ptr. Compared to copying the FuncRequest, the shared_ptr has two
advantages:
* Recreating the menu each time creates a lot of new actions, so we avoid a lot
of copies.
* FuncRequest can remain forward-declared in Action.h.
The field prettyname can accept Unicode and therefore must be parsed into a
docstring.
Little simplification of the code on the way.
* For other fields, either a validator should be set to prevent non-ascii input
in the preferences, or they should be transformed into docstring too.
When breaking paragraph in an empty top-level paragraph, nothing
happens on screen but yet there is an undo step because the layout is
reset to what it already was.
Avoid this case.
Fixes bug #10089.
Single quotes are special to our parser and must be either escaped or
quoted if they are part of a filename, otherwise they are stripped out.
See #10342.
Since we process layouts sequentially, we export LaTeX code for the
title once we arrive to a layout that has InTitle false. If the
document then later has a layout with InTitle true, we do not
(currently) go back to add it to the title and just output it
in-place. We previously warned with LYXERR0, but since this can
cause missing or unexpected output we now warn in the GUI.
For more information, see the following lyx-devel thread:
https://www.mail-archive.com/search?l=mid&q=a65ae226-d3bd-8fc5-a93b-7bb23f1cda82%40lyx.org
Now by default all insets paint their own background when needed. This
means that 63cf3297 and part of 9940acc5 can be reverted.
To avoid extra painting, background drawing is disabled for
InsetCommand and InsetCollapsable. These insets draw background as
part of their normal drawing activity.
This will avoid drawing artifacts with InsetNewpage, InsetVSpace and
probably some others.
Fix assertion with gcc 6: The comparison function must be a strict weak
orderings and not give x < x.
Fix assertion when a custom exportable document format is given a non-ASCII
name. Use qt_ to be consistent with the rest of the code.
Use Qt's locale-aware comparison for appropriate sorting.
There was an oddity in the manual that exposed a problem with the
test for the "special case" of an inset all by itself in a pargraph.
If a font change is applied to that inset, we still need to open the
paragraph.
File format change. On format reversion, we need to put some extra code
in the local layout that emulates the 2.3 behavior.
Simply Input'ing the respective layouts is unfortunately not enough,
due to the insertion order.
See #9977
"lyxclient -g" now calls the just implemented lyx-activate (see
previous commit) after server-goto-file-row. This allows the PDF
viewer to switch to LyX after executing a reverse search.
On Linux and Mac OS, this action brings the LyX window into focus.
Such behavior is not allowed by Windows OS so instead the color of
the taskbar entry is changed to indicate that the window has changed
in some way.
The action is hidden in the shortcuts menu because it would make
sense to assign a shortcut to it. The only way to execute shortcut
would be if the LyX window is already activated.
lyx-activate will be used (see next commit) to allow the PDF viewer
to switch to LyX after executing a reverse search.
* New constant LYXFILE_LAYOUT_FORMAT in src/TextClass.cpp. This determines the
layout format corresponding to the current lyx file format.
* The Local Layout pane is changed so that the "Convert" button does not convert
to the internal layout format but to the current lyx file format, to make sure
that the file does not become unreadable with a specified earlier version of
LyX.
* If LYXFILE_LAYOUT_FORMAT == LAYOUT_FORMAT then LyX behaves as before. This is
the value defined in master.
It is currently called on hundreds of files: settings, layouts, icons, cached
graphics files (incl. graphics from files that are not opened on startup).
According to callgrind, fixing the FIXME comments could speed up startup by more
than 30%.
A static local variable is guaranteed to be initialized only once, and in time.
Lambda expressions can be used to perform complex initialization of those static
variables on the spot.
(starting from: gcc >= 4.8, msvc >= 2015)
Prevent setRange() from causing a recursive call to scrollTo(). Reduces three
calls of scrollTo() to one call for all scrolling functions of the scroll bar
(e.g. clicking on the arrow, dragging, or clicking somewhere on the scrollbar).
