The pointer macroInset points to a vector element. When another element is inserted in this vector, some reallocation occur and the pointer points to a deleted element.
This does not crash LyX by default, but it is bad enough to make valgrind cry.
See ticket #9804.
We already have a CoordCache of insets dimensions. It is not necessary
to store the same information in two places.
Give a name to CoordCache tables types to improve code readability.
Remove ParagraphMetrics::singleWidth, which is not used anymore.
This deep copy used to mess with the unique identifier: what TexRow saw was
different from the original uid. There may also be performance improvements.
(Using Georg's suggestion)
These features are active in DEVEL_VERSION when Debug is set to LATEX.
1. The TexRow information is prepended to the source panel.
2. Clicking on any line in the source triggers reverse search. (This would be an
interesting feature to implement on the user side, but we need a proper LFUN.)
WriteStream is now built from an otexstream instead of an odocstream, and
therefore counts lines in a TexRow. Calls to TexRow are added in relevant places
in math insets.
This finishes adding line tracking for math in the source panel and for forward
search.
The id is just the memory address.
The status bar now spits out the math inset uid information when in a math cell
in DEVEL_VERSION, like it already does when in a paragraph.
This is preliminary work for extending the cursor<->row tracking to math.
These were found by cppcheck:
Member variable 'x' is not initialized in the constructor.
The crash #9788 would not have happened if this had been done earlier.
The test case did show several problems:
- The alignment argument was not parsed correctly if it was not in braces
- There one column too much created, since I did not take into account that
the current cell must bge replaced by the multicolumn cell
- If the last line of an array contained only an empty multicolumn cell, then
the complete multicolumn was swallowed
- The decision whether to output the column separator & was sometimes wrong
for multicolumns
This fixes the crash of bug #9788. However, the misparsing of \multicolumn
is still there: LyX thinks that the array has three columns, it inserts an
additional one before the multicolumn.
Use the function support:truncateWithEllipsis() to shorten a docstring with
... at the end. Actually we use U+2026 HORIZONTAL ELLIPSIS instead of "..." when
automatically shortening strings. This is to be consistent with Qt's own
truncation and is much nicer on the screen.
This includes the bugs #9575 and #9572 regarding broken text elision in the
outliner.
Known issues (non-regressions):
* TocBackend::updateItem() should be rewritten to update all TOCs. (#8386)
* "..." should be replaced with … everywhere else on the interface (including
translation strings).
* We should prefer to rely on QFontMetrics::elidedText() to truncate strings
with an ellipsis whenever possible, or an equivalent for the buffer view
dependent on the font metrics. See the warning in src/support/lstrings.h.
* New TOC "math-macro". This means that math macros can now be accessed in the
outline pane in their order of appearance or in alphabetical order, and can be
searched using the filter.
* Lists of floats now show subfloats deeper in the navigation menu
* The arbitrary 30 element cut-off after which nothing is shown except "Open
Navigator..." is removed. Menus now have no limit in size, so Qt may display
them scrollable. In exchange, we always show "Open outliner..." at the
beginning. I tested for performance issues with a rather complex document and
it is fine; but this does not exclude corner cases with lots of TOC entries of
a certain kind. If necessary, populating the navigation sub-menu should be
delayed like the main menu.
* Elements that do not contribute to the output (e.g. in a note, a disabled
branch) are now preceded with a symbol indicating this status. (The machinery
was already there; I wonder why it was not implemented already.) I have chosen
U+274E NEGATIVE SQUARED CROSS MARK.
* Fix the contextual menus in the outliner (bug introduced at 94e992c5).
* Toc item now move to the caption when present, but first center on the float,
to prevent the situation where the caption is at the top of the screen and the
contents of the float is off-screen above the caption.
(Internally, the action of the toc items can now be customised)
* Fix the LyXHTML output. Disabled captions no longer appear in the list of
figures.
Remove unwanted clearSelection()s in MathData::updateMacros(). These calls broke
text selection with keyboard and mouse, search-and-replace, restoring selection
after Undo, etc. in a document with math macros since 1.6.0. (Regression at
6aa54673 and 12314897)
I do not know the purpose of these calls, but the selection code has been worked
on since, and I cannot produce undesired behaviour after removing
them.
We introduce TocBuilder for building TOCs that take into account both float
insets and their captions.
* Floats without caption are shown with their content.
* Floats with a caption are shown with their caption, but clicking the entry now
correctly moves to the float and not to the caption.
* Subsequent captions produce additional entries in the TOC.
* Figures and subfigures are correctly ordered in the outliner.
* New TOC "senseless" for captions appearing alone (a bit like broken references
are still displayed in the menu and outliner).
* Disable LFUN_CAPTION_INSERT if there is already a caption in a listing
Known issues:
* Inconsistent output for includes located inside floats
* We should record the end of the float in addition of the beginning for a more
accurate cursor -> outliner entry conversion
(#9762)
* fixes a bug where this was already the expected behaviour of
math-subscript and math-superscript but failed.
* corrects the behaviour where if there is \newcommand in the
selection, then a corresponding macro template is introduced
instead of a math inset.
* fixes a bug where math-display, math-subscript and math-supscript
would also introduce such a macro template in a way unrelated to
their function. Now it only happens with math-mode without
arguments.
* fixes a bug where a text that does not denote a macro definition,
e.g. "aaa\newcommandaaa", would produce \invalidmacro.
These were all found by cppcheck. Even in constructors that are there "only
because of std containers" the class should be initialized correctly. You can
never know whether such an object does not get used, and then a nice crash
caused by dereferencing a NULL-pointer is better than undefined behaviour.
The functions reverseDirectionNeeded() and reverseDirectionNeeded() do
not rely on the Bidi class. The first one is changed into a Cursor
method, and the second one is replaced with explicit code.
The bug workaround added an extra repaint, which can be very bad when
editing large tables.
It turns out that the bug this is trying to fix is due to the handling
of LFUN_LINE_END in InsetMathGrid. Adding the same code as in
InsetMathNest fixes the problem.
The workaround can therefore be removed.
When the cursor had idx > 0 (since math-display does merging anyways),
reset cursor to the start of the inset. This looks less strange than
setting it at the end.
Now at least the basic case of a displayed equation with cursor
somewhere at top-level is handled correctly.
The math-display lfun operates at top level in the math inset.
Therefore, when the cursor is in an inner inset, it will after the
lfun be moved at top level. Unfortunately, there is no way that I know
f to detect this in Inset::doDispatch.
Even if we could, as things stand, it is difficult to keep the cursor in the
inner inset, especially if the inner inset moves : this happens for
example when moving from eqnarray to inline maths.
Therefore this fix is the best I can think of now.
Fixes part of bug #9664.
It turns out that it is always better using the copy of the MacroData
for updating the macro_ pointer to avoid problems related to the cursor
position.
This can happen when a macro is copied and then the document where
it is defined is closed. In this case, the macro survives in the
cut stack but the the buffer pointer is dangling.
The MacroData pointer is updated by MathData::metrics() which is not
called when selecting a math inset with instant preview for math on.
Thus, we have to update it in the copy constructor otherwise a crash
is almost assured when hitting Ctrl+C.
We only look once for the definition of the same macro, but we have
to always check its arguments when the same macro appears more than
once in a math inset. So, move earlier this check.
The strategy adopted in bc47054b had some drawbacks related to the way
instant preview snippets are generated. See the subthread starting at
http://www.mail-archive.com/lyx-devel@lists.lyx.org/msg187916.html
for details.
The strategy adopted in this commit is that of adding macro definitions
only for the macros actually used in a preview snippet, independently
of whether some macro was already used in a previous snippet. In this way
the snippets don't need to be changed according to whether they are
compiled as a whole or separately from each other. This fact was causing
the regeneration of a preview snippet whenever the cursor entered the
corresponding inset, even if the generated image would have not changed.
The problem of defining or redefining a macro is taken care by the
python scripts.
The FIXME is not needed, this is how StyleChanger and FracChanger work:
In the constructor, they change the state of the FontInfo, and in the
destructor the state is set back. Therefore, all code that needs the changed
state, needs to be executed while the objects do still exist.
