While a one paragraph large collapsable inset (containing for example a tabular) could be very wide and trigger horizontal scrolling, the code that makes collapsable insets wide when they contain several paragraphs would actually make them narrower in this case.
Typical example is a wide tabular and a caption in a table float, where horizontal scrolling would not trigger.
(cherry picked from commit a879bc2575)
It is wrong to assume that direction is left-to-right when no indication exist.
Add a new enum with values LtR, RtL and Auto to be used as argument of
the private text() methods. When direction is Auto, let Qt decide how
the string shall be layed out.
This is reimplementation of 51ee267c. A direct cherry-pick was not possible.
Fixes bug #10169.
When the box has a special width, one should not consider that as a fixed width. Otherwise, due to implementation quirks, the width will be set on screen as 1 inch.
A better solution would be to actually set the width by taking in account the contents width, height ans total height. This is not very difficult, but I do not know whether it would workout well in the work area.
Fixes bug #10048.
With Qt 5, our code did not correctly detect when icons were
available and thus tried to use nonexistent icons.
QIcon::hasThemeIcon(theme_icon) returns true when theme_icon is
empty. We now rely on the behavior that QIcon::isNull() returns true
if the icon is empty.
The same code is used with Qt 4 and Qt 5.
This is used when scaling graphics previews. It is also used on a rare occasion
to scale instant previews when the user's configuration mixes low-dpi and
high-dpi monitors (#10114).
With this change, it becomes possible to run the following commands:
inset-forall Separator:latexpar char-delete-forward
inset-forall Separator:parbreak inset-modify separator plain
The first one deletes all latexpar separators. The second one turns parbreak
separators into plain separators. This is safe, flexible, and avoids adding a
new LFUN.
2.1.x allows some document settings to have negative values where
2.2.0rc1 does not (because of the bug fix at 9e166088). If a user of
2.2.0rc1 opens a document from 2.1.x that contains one such negative
value, it will appear as though no change to the document settings
can be saved because 2.2.0rc1 treats the document settings as
invalid immediately on opening the dialog. Further, unless the user
manually goes through each tab they will not see the red text next
to the input that is now considered invalid. This could lead to
confusion for users. One example of such confusion is [1].
The following settings now allow negative values, which is
consistent with 2.1.x. Negative values in these settings do not lead
to LaTeX errors:
- Text Layout tab: the two line edits enabled with "Custom"
- Page Margins tab: all eight line edits
The following settings are not changed by this commit, so they now
(with 2.2.0) do not allow negative values that 2.1.x allowed. This
change makes sense because negative values lead to LaTeX errors in
these cases:
- Page Layout tab: the "Height" and "Width" line edits, which are
enabled when "Custom" is selected
[1] https://www.mail-archive.com/search?l=mid&q=CAGZ2pgXqf27UaAaQ%3De_wFz1fGTa6Yv0iFyS97qu1C7B5R59irg%40mail.gmail.com
An undocumented behaviour of QClipboard::mimeData() is that it can fail on
windows due to the specificities of the windows API that allow a race condition.
In particular it seems that querying the clipboard as soon as the dataChanged()
signal is received favourises this race condition.
Thanks to Trac user bquistorff for the explanation and a proof of concept patch.
This was a regression of 8aa37c43. I did not take into account that end_pos
could be -1, so the code that checked whether a pair of braces needs to be
inserted between two hyphens did not work for that case. Now we check for
the length of text_, which should be done anyway, and only take end_pos into
account when it is not -1.
http://thread.gmane.org/gmane.editors.lyx.devel/161725
These wms have trouble with the fix at b5a2f1c7, probably more precisely with
the trick to force the calculation of the actual sizes before the display
(layout->invalidate() and the code around it).
This patch gets rid of the code that forces the calculation. As a consequence,
the minimum sizes are again incorrect the first time the window is shown. They
are only correct the second time the window is shown. Now here is the trick: LyX
remembers the sizes of windows between sessions. Therefore, as soon as the good
minimum size has been set, the good size is remembered for the next
session. Thus, in the following sessions, even though the minimum size is
incorrect the first time, the dialog still opens with the good size. So the user
does not see the problem in practice, apart from the very first time.
This is meant as a temporary workaround.
* provide GuiApplication::typewriterSystemFont() to get a fixed font consistently
* enlarge fixed font on Mac because of the too small default Qt system font
* use it in source pane, progress view, log view and document preamble editor
Regression at cfeddb929. If a flex inset has no layout upon saving (e.g. if a
module has been deleted) then its name became lost. This checks whether the name
resolution, introduced with the ObsoletedBy tag, comes back empty-handed (which
it will if the layout is not defined). In this case, we do as was done before
cfeddb929.
In addition, the use of support::token to strip "Flex:" off the beginning of the
name introduces a regression if somebody used a name containing ":". This
replaces it with support::split.
This is the same as the parbreak separator and is represented on screen
as the old parbreak. Old parbreak separators are converted to latexpar
separators when they are used for introducing blank lines in the
latex output rather than for separating environments.
Instead, parbreak separators are now represented on screen by a
double line. In essence, latexpar and parbreak separators produce
the same output but are represented differently on screen.
The context menu does not account for latexpar separators and only
"true" separators can be turned each into the other one.
7b1107d7 introduced the following inconveniences which are regressions to 2.1:
* The citation dialog can open with vertical scroll bars in the options
* The citation dialog can open with horizontal scroll bars, especially if the
translated text is longer than the original text (e.g. in FR)
* Resizing the dialog is inconvenient because it increases the gap between the
options. This is unlike before when the dialog could let us see more of the
reference list when enlarging.
This is because the QToolbox that the above commit introduced is not natively
aware of the sizes of its page sub-widgets. The widget is not conceived for this
use, where the space is scarce.
Geometry values provided in the ui file (automatically computed by qtcreator I
suppose) somehow gave the illusion that it worked, but relying on such values is
not portable : it does not take into account the specific theme, font sizes and
localization. This explains why it failed on my side and will probably fail in
other settings too.
Luckily, there is a simple way to make QToolbox suitable for the current use,
which is to add the "missing link" which computes its size based on the minimal
sizes of its pages. The result looks very nice and intuitive. It solves all the
aforementioned issues.
The term LongTable has been deprecated and moreover the renaming makes the interface easier to the eye.
File format updated to 507. (conversion based on jamatos patch)
Layout format updated to 60.
tex2ylx tests updated.
Document EmbeddedObjects.lyx has been updated.
There are two regressions that are fixed here:
* empty rows at the end of a paragraph (think after newline at end of
paragraph or empty line in Verbatim) do not have an end-of-par
marker. This is fixed by removing the early return in breakRow and
letting the whole function be executed. This requires to relax an
assertion in Paragraph::fontSpan. It makes sense here to query
position at the end of the paragraph.
* a newline at the end of a paragraph will be followed by and
end-of-par marker. This is fixed by skipping the end-of-par marker
when a new row has been requested.
The context menu of newline insets was completely greyed out if one clicked
at the right of the inset. Thanks Scott for finding this. The fix is to undo
the cursor movement also for insets without settings, but with a context menu.
According to callgrind, the time taken to display the symbol dialog is spent in
updateSymbolsList. No longer translate strings for every symbol. This speeds
it up more or less by a factor two.
The stmary font has an unusual large descent that was causing a large
gap between lines in the math delimiter dialog because of the \llbracket
and \rrbracket delimiters. The solution is to force Qt using the same
size for all elements of the QlistWidget widget instead of letting it
compute the size of each element.
When a row is broken by for example a display math inset, it is
possible to put the cursor at the end of the previous line using the
boundary setting of cursor.
For newline insets and separator insets, we want to force the cursor
to be before this inset. Also, in the other cases, do not force
boundary property (effectively reverts part of f29e7803).
