With inputenc == "auto" or "default", the encoding changes with
the language and must be reset after an eventual language switch in insets
or environments (see #6216).
However, whether we need to do this does not depend on 8-bit TeX vs. LuaTeX
but on the possible use of more than one encoding for the document.
With "nonTeXFonts", the encoding is utf8,
LuaTeX with TeX fonts requires encoding handling similar to 8-bit TeX.
(Additionally, the value of "params.inputenc" could be tested: if it is
not "auto" or "default", we have just one common encoding and could skip
the reset as well.) Not sure how much time this saves, though.
This is one part of bug 9744: If you toggle between TeX fonts and non-TeX
fonts, the settings of the other choice are no longer thrown away, but stored
and re-activated if you switch back. Most parts of the patch are purely
mechanical (duplicating some BufferParams members), the only non-mechanical
change is in the GUI logic.
and record an undo call. This deals with the problem of marking
the Buffer dirty, as well.
Move LFUN_BUFFER_TOGGLE_COMPRESSION and LFUN_BUFFER_TOGGLE_OUTPUT_SYNC
to Buffer.cpp, and add an undo call.
In computeRowMetrics, the right margin of the row shall be taken in account when the text is not left-aligned. Rewrite the code in terms of the available width `w' to avoid this pitfall.
The pointer macroInset points to a vector element. When another element is inserted in this vector, some reallocation occur and the pointer points to a deleted element.
This does not crash LyX by default, but it is bad enough to make valgrind cry.
See ticket #9804.
There was a problem with end of paragraph markers. By design, wide insets choose their size without taking in account the marker. This should not lead to unneeded horizontal scrolling.
Part of ticket #9807.
PDF properties (Author, Title...) need to be quoted properly when writing (normal operation and tex2lyx). Also, reading them requires to use Lexer::getString() directly, because >> uses next(), which does not handle escapes.
Fixes bug #9830.
hyperref expects LICR macros for non-ASCII chars in the PDF Header Information.
As hyperref provides good coverage for \inputencoding{utf8}, we try
this if the current input encoding does not support a character.
With XeTeX, we do not load inputenc and cannot use \inputencoding.
However, utf-8 works out of the box so we can write the content in UTF8.
The \jobname macro is redefined for the preview snippets such that
it contains the name of the document without extension. This is
harmless because the moment it is redefined, TeX has already chosen
the name of the output and log files. On the other hand, any use
of \jobname in preview snippets is now consistent with what one
obtains after exporting and compiling by hand.
Other than BIBINPUTS, also BSTINPUTS and TEXFONTS are exported.
They do not replicate the setting for TEXINPUTS but are set such
that the current dir (i.e., the temp dir) and the document dir
are also searched for bibtex and fonts related files.
The code in InsetTabular disables the toolbar icons and menu entries related to vertical lines.
The code in GuiTabular disables vertical lines in the Settings dialog.
Note that there was a bug in
GuiSetBorders::set(Left|Right|Top|Bottom)Enabled, where the borders
did not get drawn correctly.
Fixes bug #9816
Rewrite the logic completely:
* fix cases where the offset was reset unnecessarily
* fix cases where the row was scrolled too much: as soon as a side of the row is completely visible, there is no need to scroll more.
* fix cases where offset would never reset
This partially reverts commit 0f1fdaaa9, but only redraws the current
row when the value returns by getPos is obviously false. It would also
be possible to check whether the current cursor has all its insets in
cache instead.
A better fix should be found, but this is unfortunately not 2.2 stuff.
Fixes bugs #9796 and #9812.
The execution took some time and the messages were delayed
until all test files were processed. Now as each testfile
is processed, the appropriate messages are printed.
There is also a new target: cleanupdatetex2lyxtests
It is the same as updatetex2lyxtests, but removes also
some extra created files from the source directory.
Cmake versions prior to 2.8.11 don't know this command, but
our minimal requirenment is 2.6.4
Thank to Vincent, it is replaced by using 'if(file1 IS_NEWER_THAN file2)' comparision.
Sometimes when compilation fails a PDF file is created but is empty
and the viewer gives an error when trying to view it. One such
example is compiling the current lib/examples/PDF-comment.lyx file
with TeX fonts and the following version of LuaTeX:
beta-0.80.0 (TeX Live 2015) (rev 5238)
The wordSpacing property of a QFont object applies only once when there are multiple spaces between words. Therefore Row::Element::countSeparators shall not count spaces, but groups of spaces.
Fixes bug #9808.
This is a tiny simplification that makes understanding the code more easy and
will help in fixing the remaining regressions. The logic remains the same, no
export test result is changed.
Starting with Qt 5 the modifiers aren't reported correctly for disabled swap.
Until this is fixed it is corrected by reverting the modifier mask to check for.
The horizontal alignment changes caused a regression for documents in older
formats. This could have been fixed by adding the following lines to the
format entry for 489 in development/FORMAT:
Previously, the horizontal position was ignored except for the
following parameter combinations:
- fixed width and type Boxed and without inner box
- fixed width and any type and with inner box and with makebox
Now, it is also used for the parameter combination below:
- makebox is not used and not (type Boxed and without inner box)
and a corresponding conversion to convert_BoxFeatures() in
lib/lyx2lyx/lyx_2_2.py. However, it was decided to revert the box alignment
changes instead: The box alignment can contradict the paragraph alignment. A
better way to avoid the additional space that can be created by paragraph
alignment (which was the motivation for implementing box alignment) is the
same as for table cells (see noTrivlistCentering() in src/Paragraph.cpp).
This would be a file format change and it is too late now for 2.2.0.
See http://www.mail-archive.com/lyx-devel@lists.lyx.org/msg188147.html for the
complete discussion (subject "Regression in lyx2lyx box alignment").
Fixes output for 3 of the 4 test lyx-files.
Includes "FIXME"s at places where further action is required to get the XeTeX
export right but I don't know how.
Remove member disp_ that is defined both in Cursor and CursorData classes
Pass parameter of convert<T>(docstring const) templates as const reference for performance.
b1c68dccf8 and 46aed6d2b9 fixed some language nesting issues, but introduced
a regression for the case that there is a standard paragraph in a foreign
language, followed by a list (e.g. itemize) in the same language, followed
by the end of the document, as e.g. in lib/doc/de/Additional.lyx. The reason
for this was that not all language ending commands did reset
state->open_polyglossia_lang_ correctly.
I am sure that one can still construct broken corner cases, and I am also sure
that this was already possible before b1c68dccf8 and 46aed6d2b9. However,
this fix seems to fix the most important issues, and to get nesting completely
correct we would probably need some stack-like structure, for languages and
encodings, also for the CJK part (which is not touched at all by this commit).
The correct mappings break the tex2lyx roundtrip tests because both,
the tests and tex2lyx use the wrong mapping (\b for "combining minus below").
Fix tex2lyx and the test files so that round-trip tests pass again.
The culprit was that the computation of textwidth did not take wordspacing in account.
Also fictor the code so that the pixmap path can use the special RTL handling.
It is not clear however that the handling of left and right bearing works correctly.
We already have a CoordCache of insets dimensions. It is not necessary
to store the same information in two places.
Give a name to CoordCache tables types to improve code readability.
Remove ParagraphMetrics::singleWidth, which is not used anymore.
Please use the new function otexstream.append(str, texrow) to append an
odocstringstream with texrow information to the output when outputing to a
string buffer (e.g. case of subcaptions).
This deep copy used to mess with the unique identifier: what TexRow saw was
different from the original uid. There may also be performance improvements.
(Using Georg's suggestion)
These features are active in DEVEL_VERSION when Debug is set to LATEX.
1. The TexRow information is prepended to the source panel.
2. Clicking on any line in the source triggers reverse search. (This would be an
interesting feature to implement on the user side, but we need a proper LFUN.)
WriteStream is now built from an otexstream instead of an odocstream, and
therefore counts lines in a TexRow. Calls to TexRow are added in relevant places
in math insets.
This finishes adding line tracking for math in the source panel and for forward
search.
This is preliminary work for extending the cursor<->row tracking to math.
TexRow used to associate, to each row, a location id/pos where id determines a
paragraph and pos the position in the paragraph.
TexRow now associates to each row a list of entries, text or math. A math is a
pair uid/idx where uid will determine a math inset and idx is the number of the
cell.
The analogy id/pos<->inset/idx works better than the analogy id/pos<->idx/pos,
because what matters for the TexRow algorithm(TM) is the behaviour in terms of
line breaks.
This only improves the source view and the forward search, not the error report
and the reverse search (though this could be easily added now).
The id is just the memory address.
The status bar now spits out the math inset uid information when in a math cell
in DEVEL_VERSION, like it already does when in a paragraph.
This is preliminary work for extending the cursor<->row tracking to math.
otexstream used to count lines to build a TexRow, and some other things. The new
class otexrowstream has the line counting feature of the previous otexstream
without other stuff. otexstream is now a subclass of otexrowstream that has the
same features as before.
This is preliminary work for extending the cursor<->row tracking to math.
The code that sets open_polyglossia_lang_ is not only executed for polyglossia,
but also for babel, so we have to use the correct language end command.
The context menu did no longer work for some insets, since it requires the
cursor to be in front, and editXY() is also used to determine the inset for
the context menu. Now the cursor is corrected if needed.
This was made visible by aab1b145a5, since xhtml export for
lib/doc/Additional.lyx caused an exception. However, the cause for this was
already present earlier: All attempts to output a std::string to an
odocstream resulted in trying to change the encoding of the stream instead,
since there is no operator<<(odocstream &, std::string) defined, and an
implicit conversion to SetEnc happened instead.
This is fixed by making the SetEnc constructor explicit and adjusting all
code parts that did not compile anymore after that. The parts of the code
that did use the wrong output operator were the std::string version of
htmlize() from output_xhtml.cpp and all changed parts in the other .cpp files.
I also removed the std::string versions of html::htmlize() and
html::cleanAttr(), since it was difficult to see which encodings were used
with these. Now we are always explcit when using html::cleanAttr() and
html::htmlize().
Previously, if one clicked onto a large non-editable inset like the new LyX
logo inset, the cursor was always positioned in front of the inset, even if
the click was almost at the back edge. Now the cursor is positioned at the
correct edge. I tested this also with RTL contents, where from means right
and back means left, but the inset anchor position anchor point is still
at the left, and the right edge is dim.wid pixels to the right of it.
The rule-of-three says that if any of virtual destructor, copy constructor
or assignment operator needs to be manually implemented, then all three
should be implemented. Otherwise you can get subtle bugs which can be
difficult to find. In the changed classes, changing a copy-construction to
an assignment would have had surprising effects. Now they all behave
consistently.
Found by cppcheck: (style) Same expression on both sides of '&&'.
I deduced the correct if-condition from the other places where theLaTeXFonts()
is called.
These were found by cppcheck:
Member variable 'x' is not initialized in the constructor.
The crash #9788 would not have happened if this had been done earlier.
The test case did show several problems:
- The alignment argument was not parsed correctly if it was not in braces
- There one column too much created, since I did not take into account that
the current cell must bge replaced by the multicolumn cell
- If the last line of an array contained only an empty multicolumn cell, then
the complete multicolumn was swallowed
- The decision whether to output the column separator & was sometimes wrong
for multicolumns
This fixes the crash of bug #9788. However, the misparsing of \multicolumn
is still there: LyX thinks that the array has three columns, it inserts an
additional one before the multicolumn.
This was a regression from 2.1.x. I failed to copy the horrible hack that was present for the special case of () in Hebrew.
There is a real need for someone who understands RTL language stuff to fix this. Currently () are wrong in .lyx files IMO. We should not have to swap them for display.
This removes the old implementation of Cursor::getSurroundingPos, that has been superceded in commit .
As this was the last user of the Bidi class, this can be removed too.
