- ucs4_to_qchar(): add a FIXME and an assertion
* GuiFontMetrics: replace the table based cache with two QHash based cache. With this change, the speed overhead is not negligible (exact same score with the UserGuide test) and the required additional memory is minimal (maybe one or two megabytes).
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@16132 a592a061-630c-0410-9148-cb99ea01b6c8
- add constants instead of hard-coded values.
- add assertions and comments for out of range values.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@16126 a592a061-630c-0410-9148-cb99ea01b6c8
http://bugzilla.lyx.org/show_bug.cgi?id=2900
The only drawback is that it requires about 20Mo extra-memory when loading the UserGuide. If it turns out to be too much, we can switch to a QHash based solution instead of a table.
* dimension.[Ch]:
- Dimension(LyXFont const, char_typec): new ctor
- set(LyXFont const & font, char_type c): new method.
* frontends/FontMetrics.h:
- width(char_type): is now a pure virtual method.
* GuiFontMetrics:
- CharMetrics: new structure;
- the metrics cache now also cache ascent and descent. This is especially useful for mathed.
* MathSupport.[Ch]:
- mathed_char_dim(): deleted. We now use Dimension::set() directly instead.
* rowpainter.C: fixe empty space.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@16124 a592a061-630c-0410-9148-cb99ea01b6c8
This pointer was one reason for the Mac crashes because it not always had
the same value as the application_ smart pointer
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@16119 a592a061-630c-0410-9148-cb99ea01b6c8
../../../../src/frontends/qt4/GuiView.C:142: warning: comparison between signed and unsigned integer expressions
../../../../src/frontends/qt4/GuiView.C:144: warning: comparison between signed and unsigned integer expressions
../../../../src/frontends/qt4/GuiView.C:146: warning: comparison between signed and unsigned integer expressions
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@16113 a592a061-630c-0410-9148-cb99ea01b6c8
Part 2: avoid pure virtual function,
if (theApp)
theApp->unregisterSocketCallback(fd_);
does not help, we've tested it!
Without a Mac it is hard to find a better solution
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@16110 a592a061-630c-0410-9148-cb99ea01b6c8
kAEOpenDocuments ApleEvent.
(event): new method to do the same thing using qt4 built-in support.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@16099 a592a061-630c-0410-9148-cb99ea01b6c8
- execBatchCommands(): split in loadFiles() and execBatchCommands().
- exec(): enable batch command to be processed from GUI.
* Application:
- start(): deleted.
* GuiApplication:
- execBatchCommands(): new method
* GuiWorkArea::update(): call viewport()->repaint() instead of viewport()->update(), this enable to update the screen immediately when asked by a batch command.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@16051 a592a061-630c-0410-9148-cb99ea01b6c8
* buffer.h: changed() signal do not have an argument now.
* BufferView.C:
- setBuffer(): changed update() call to updateMetrics().
- update(): sanitize how the flags are used.
- scrollDocView(): add a call to updateMetrics() at the end.
* LyXFunc::dispatch(): adjust changed() signal emission.
* LyXText/text3.C:
- cursorPrevious(): delete BufferView::update call; adjust cursor flag.
- cursorNext(): ditto.
* frontends/LyXView.C: adjust Buffer::changed() signal connection.
* frontends/WorkArea.[Ch]:
- redraw(): no need to re-update the metrics if we don't change views.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15997 a592a061-630c-0410-9148-cb99ea01b6c8
when iconpalette detached from the math dialog, the iconpalette widget
width may become too large to fit to the screen.
when detached resized to a too small size, icons overlap.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15966 a592a061-630c-0410-9148-cb99ea01b6c8
* BufferView:
- update(): returns a pair of bools in order to inform for singlePar cases.
- workAreaDispatch(): ditto and simplify the logic by using cursor update flags.
* text.C
- breakParagraph(): change the cursor update flag as needed.
- insertChar(): ditto.
- erase(): ditto
- redoParagraph(): now returns true if there is a height change.
* text3.C: dispatch():
- initialize the cursor flag at the beginning
- LFUN_MOUSE_PRESS: no need to update.
- LFUN_MOUSE_RELEASE: ditto.
- add some FIXMEs and comments.
* LyXFunc::dispatch(): simplify the BufferView update.
* insets/insetcollapsable.C: clarify and simplify the logic in doDispatch().
* WorkArea::dispatch(): redraw only if needed.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15958 a592a061-630c-0410-9148-cb99ea01b6c8
Following patch corrects some misbehavior in TOC dialog:
- When clicking on Toc insets, dialog switches to correct list.
- cursor goes to correct entry when clicked..
- some other fixes..
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15949 a592a061-630c-0410-9148-cb99ea01b6c8
* src/buffer_funcs.h
(updateLabels): Add bool childonly argument
* src/insets/insetbase.h
(addToToc): New virtual method
* src/insets/insetinclude.[Ch]
(addToToc): New virtual method
(updateLabels): New method
* src/TocBackend.h: reorganize classes so that we can forward
declare TocList
* src/insets/insetfloat.[Ch]
* src/insets/insetwrap.[Ch]
(addToToc): Adjust to type changes in TocBackend.h
* src/frontends/qt4/TocModel.[Ch]: ditto
* src/frontends/controllers/ControlToc.[Ch]: ditto
* src/TocBackend.C: ditto
(TocBackend::update) Remove test for float and wrap inset,
call virtual method instead
* src/BufferView.C
(BufferView::dispatch): make LFUN_PARAGRAPH_GOTO work even if the
target paragraph is in a different buffer
* src/MenuBackend.C: Adjust to type changes in TocBackend.h
(expandToc): Add an entry for the master doc in child docs
* src/buffer_funcs.C
(setLabel): Add text class parameter
(updateLabels): handle included docs if requested by the caller
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15904 a592a061-630c-0410-9148-cb99ea01b6c8
- LyXText::breakParagraph(): Redo paragraphs before setCursor()
- LyXText::insertChar(): ditto
* lyxfunc.C: take into account BufferView::update() returned value for WorkArea redrawing.
* BufferView::update(): we also need a second step in singlePar mode.
* WorkArea.C
- startBlinkingCursor(): also show the cursor
- stopBlinkingCursor(): also remove the visible cursor
- processKeySym(): stop and start the cursor blinking instead of merely hide and show it.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15884 a592a061-630c-0410-9148-cb99ea01b6c8
* src/frontends/qt4/ui/QPrefConvertersUi.ui: Readd translation hint
to label and remove broken tooltip that somebody created instead
* src/messages.C
(Messages::Pimpl::get): reenable stripping of [[..]] from
untranslated messages
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15872 a592a061-630c-0410-9148-cb99ea01b6c8
- new pimpled TocBackend member and associated accessors.
* toc.[Ch]: delete all toc related methods except outline.
* TocBackend:
- goTo(): deleted, this gets rid of the LyXView dependency
- made all accessors const.
* ControlToc:
- rework the controller to work exclusively with TocBackend.
- goTo(): now call LyXView::dispatch() directly
all other files: update with the TocBackend or ControlToc API changes.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15852 a592a061-630c-0410-9148-cb99ea01b6c8
* src/funcrequest.h: split UI enum into MENU and TOOLBAR
* src/lyxfunc.C (getStatus): disable menu entries that need a
buffer when window does not have focus (bug 1720)
(dispatch, sendDispatchMessage): properly redraw toolbar after each
action (bug 2877).
* src/frontends/Toolbars.C (layoutSelected):
* src/MenuBackend.C (MenuItem):
* src/ToolbarBackend.C (add): adapt to FuncRequest change.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15825 a592a061-630c-0410-9148-cb99ea01b6c8
* have the modify/new functions in the formats and converter modules share most of their code
* get rid of the pointer to PrefConverters in the
formats module
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15820 a592a061-630c-0410-9148-cb99ea01b6c8
- setBufferView(): deleted
- currentView(), setCurrentView(): new method to set the current LyXView
* GuiApplication::x11EventFilter(): use currentView().view() to get the current BufferView. This should solves the X11 selection bug.
* WorkArea:
- dispatch(): redraw only if needRedraw in preparation for the painting optimization patch. Show the cursor immediately on mouse click.
- setBufferView(): remove call to Application::setBufferView()
* GuiWorkArea:
- focusInEvent(): update only if we changed LyXView
- focusInEvent(): stop the cursor only if we changed LyXView.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15783 a592a061-630c-0410-9148-cb99ea01b6c8
* src/frontends/qt4/QDocumentDialog.C:
* src/frontends/qt4/QPrefsDialog.C:
- force updateGeometry() for Qt >= 4.2 after the panel stack
has been built. This is a workaround for a Qt bug. See FIXMEs.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15781 a592a061-630c-0410-9148-cb99ea01b6c8
* src/frontends/qt4/panelstack.C:
- fix the preferences and document dialog resizing problem (well, at least
for me -- please verify).
This didn't fix the problem. I'm pretty sure now that this is a bug in Qt 4.2(.1?)
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15770 a592a061-630c-0410-9148-cb99ea01b6c8
- fix the preferences and document dialog resizing problem (well, at least
for me -- please verify).
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15769 a592a061-630c-0410-9148-cb99ea01b6c8
* src/encoding.[Ch]
(symbol_encoding, symbol_encoding_): remove (unused)
* src/frontends/qt4/QLPainter.C
(QLPainter::text): Remove commented code. It was used in pre
unicode times to get unicode values of the symbol fonts if
USE_UNICODE_FOR_SYMBOLS was defined, but this was never defined
anyway, since the code points of the symbol fonts (as written in
lib/symbols) are directly used.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15758 a592a061-630c-0410-9148-cb99ea01b6c8
math delimiter size values
* Status.15x: kill one bug & add a new one
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15753 a592a061-630c-0410-9148-cb99ea01b6c8
- hasFocus(): new pure virtual method
- redraw(): update singlePar only if the Widget has the focusInEvent
* GuiWorkArea.h: implement hasFocus().
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15724 a592a061-630c-0410-9148-cb99ea01b6c8
* buffer.h: changed() signal now emit a singlePar boolean.
* WorkArea::redraw(): acknowledge singlePar changed() boolean
* LyXView.C: adapt signal connection to changed() signal change.
* lyxfunc.C: transmit the singlePar flag with the Buffer::changed() signal.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15702 a592a061-630c-0410-9148-cb99ea01b6c8
- Get rid of setRenderHint for anti-aliasing, because we should respect user windows setting
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15699 a592a061-630c-0410-9148-cb99ea01b6c8
Use case: Two window share the same buffer. The first window is resize. This modify the inner Buffer structure because Paragraph has a notion of line break and thus line width. When switching to the other window which does not have the same size, LyX crashes because the line break is not adapted the this BufferView width.
This commit fix the crash by resizing the BufferView on a focusInEvent(). That is not a good fix but it is a fix nevertheless. The bad side effect is that when the two BufferView shows the same portion of the Buffer, the second BufferView will show the same line breaks as the first one even though those line breaks are not adapted to the second BufferView width... such is life!
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15697 a592a061-630c-0410-9148-cb99ea01b6c8
- the cursor is still a widget, the width is 2-pixel on Windows and 1-pixel on other platforms. The full screen refresh on blinking cursor bug is now gone.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15695 a592a061-630c-0410-9148-cb99ea01b6c8
Qt doc for QMouseEvent::button():
Note that the returned value is always Qt::NoButton for mouse move events.
so we must use buttons() instead because later on
the code checks for the left button.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15693 a592a061-630c-0410-9148-cb99ea01b6c8
* GuiView::init(): switch to the first avalaible buffer if any.
* GuiWorkArea::focusInEvent(): update the LyXView tab bar there.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15685 a592a061-630c-0410-9148-cb99ea01b6c8
frontends/LyXView.h
- add tab update function
frontends/qt4/GuiView.h
- add tab update function
- add function for setting up the tabs
- add slot for the tab clicks
- add pimpl
frontends/qt4/GuiImplementation.C
- don't set the buffer as central widget
but initilize the tabs
frontends/qt4/GuiView.C
- use QTabBar for switching
- scan the bufferlist on updates
frontends/LyXView.C
- also update the tabs
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15637 a592a061-630c-0410-9148-cb99ea01b6c8
revert first patch http://www.lyx.org/trac/changeset/15597
* frontends/qt4/GuiView.C:
don't 'break' the toolbar because it doesn't work if
the toolbar will be hidden
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15636 a592a061-630c-0410-9148-cb99ea01b6c8
like virtual methods in the base class anymore even if they are implemented.
* src/frontends/Painter.h
(rectText): remove the virtual qualifier
(buttonText): ditto
(underline): ditto
(buttonFrame): ditto
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15625 a592a061-630c-0410-9148-cb99ea01b6c8
* delete some comments
* use lyxerr instead of cout in PanelStack
* move PanelStack into lyx::frontend namespace
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15623 a592a061-630c-0410-9148-cb99ea01b6c8
- ctor and dtor moved to public:
- QLPainter(): takes a QPaintdevice instead of a QWidget.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15619 a592a061-630c-0410-9148-cb99ea01b6c8
- make the method const
- delete the const on return value because they are not really mandatory for POD (Plain Old Data)
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15617 a592a061-630c-0410-9148-cb99ea01b6c8
* Painter: new ctor that sets drawing_enabled_ to true.
* setDrawingEnabled(), isDrawingEnabled(): new methods.
* QLPainter.C: only draw if drawing is enabled.
* nullpainter.h: deleted.
* rawpainter.C::paintPar(): only draw if we are inside the Paragraph.
* InsetTabular::draw(): use new Painter method instead of a NullPainter.
* InsetMathNest::drawSelection(): ditto.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15613 a592a061-630c-0410-9148-cb99ea01b6c8
Angus L. explanation: Lars introduced it years ago when he got exited by the idea
of dll-importing the frontend library, but the idea never came to anything
concrete. The file can always be resurrected later on; it's meant to be a C-
language wrapper to our C++ frontend library calls.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15611 a592a061-630c-0410-9148-cb99ea01b6c8
- src/frontends/Toolbars.h: control displaying of CT toolbar with a parameter
- src/frontends/Toolbars.C: control displaying of CT toolbar with a parameter
- src/frontends/LyXView.C : show CT toolbar
- src/ToolbarBackend.C : add CT toolbar to default.ui as REVIEW
- lib/ui/default.ui : add CT toolbar to default.ui
- src/ToolbarBackend.h : add CT toolbar type REVIEW
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15598 a592a061-630c-0410-9148-cb99ea01b6c8
* QLPainter::paintText(): use GuiFontMetrics::metrics(QString) to avoid an ucs4 to QString conversion.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15584 a592a061-630c-0410-9148-cb99ea01b6c8
* QLPainter::paintText(): use the font width cache instead of the painter metrics.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15580 a592a061-630c-0410-9148-cb99ea01b6c8
* src/encoding.h
(encoding_table): remove, this is no longer needed with unicode
(iconvName_): new member: name of the encoding in iconv syntax
* src/exporter.C
(Exporter::Export): Use return value of Buffer::makeLaTeXFile
* src/buffer.[Ch]
(Buffer::makeLaTeXFile): return whether the file has been created
successfully
* src/buffer.C
(Buffer::makeLaTeXFile): Use a docstream that converts to the correct
encoding
Display an error dialog is something went wrong
* src/bufferparams.C
(BufferParams::writeLaTeX): Undo the utf8 inputenc hack
* src/frontends/qt4/QDocumentDialog.C: Add some FIXMEs
* src/support/unicode.[Ch]
(eightbit_to_ucs4): New conversion function
(ucs4_to_eightbit): New conversion function
* src/support/docstream.[Ch]
(utf8_codecvt_facet_exception): Move to header and rename to
iconv_codecvt_facet_exception
(odocfstream): Take the encoding as argument
* src/support/docstream.C
(utf8_codecvt_facet): Generalize to other encodings than utf8 and
rename to iconv_codecvt_facet
* src/encoding.C: Remove obsolete tables
* src/output_latex.C
(TeXOnePar): Convert the paragraph to different encoding if needed
* lib/encodings: Remove obsolete tables
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15564 a592a061-630c-0410-9148-cb99ea01b6c8
1) crash in GuiWorkArea::paintEvent(), this one is solved by by encapsulating the file loading in LyXView by busy(true)/busy(false) and by disabling/enabling the work area update in GuiView::busy().
2) crash in the cursor blinking because the cursor is timed out at the moment you click on "Revert". So the blinking cursor is now disabled/enabled in GuiView::busy().
3) crash in BufferView::setBuffer() because the current buffer was already closed folling the "revert" command.
* BufferView::loadLyXFile(): set buffer_ to 0 in case of a reload (when document is reverted)
* LyXView:
- busy() is not const anymore (work_area_ is modified in GuiView)
- loadLyXFile(): encapsulate the file loading with busy(true)/busy(false)
- setBuffer(): encapsulate the buffer-switching with busy(true)/busy(false)
* GuiView::busy()
- disable/enable workarea updates.
- disable/enable blinking cursor.
* WorkArea: new startBlinkingCursor() and stopBlinkingCursor() methods.
* rowpainter.C:
- paintText(): make sure there is a Buffer from which to paint.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15556 a592a061-630c-0410-9148-cb99ea01b6c8
use position returned by BufferView
src/bufferview_funcs.C:
adjust cursor x-position by hand
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15555 a592a061-630c-0410-9148-cb99ea01b6c8
* qt4/Alert_pimpl.C: make sure the proper Qt attributes are set.
* GuiApplication::quitLyx(): add the "force" argument to the funcRequest.
* GuiImplementation:
- GuiImplementation(): remove the signal connection. This was triggered after the LastWindowClosed signal so was not useful.
- cleanupViews(): renamed to unregisterView() and handle the WorkAreas as well.
- closeAll(): new method (from LyXView).
* GuiView.C
- clean up the includes order.
- closeEvent(): make sure that theBufferList().quitWriteAll() is called if last window closed.
* lyx_main.C / LyX::quit():
- remove noAsk argument
- delete bufferList::quitWriteAll() call (this is handled in the frontend).
- delete Session stuff (ditto)
* LyXFunc::dispatch()
- LFUN_LYX_EXIT: close all window before exiting from user command (as opposed to last window closed).
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15535 a592a061-630c-0410-9148-cb99ea01b6c8
* LyXFunc:
- dispatch(): transfer assertion on lyx_view_ to each LFUN on a case by case basis.
- dispatch(): new LFUN_WINDOW_CLOSE
- getStatus(): special treatment for LFUN_LYX_QUIT
* LyX:
- views_, addLyXView(): deleted
- quit(): call saveGeometry() on each LyXView before exiting.
* GuiApplication:
- is now a QObject.
- quitLyX(): new Qt slot for lastWindowClosed signal.
* Gui.h:
- destroyView(), destroyWorkArea(): deleted
- viewIds(): new method
* GuiImplementation:
- implement above changes.
- GuiImplementation is now a QObject
- cleanupViews(): new private slot.
- buildViewIds(): new helper method
- views_ and work_areas_ are now maps of raw pointers instead of schared_ptr.
* LyXView
- now stores its id.
- dispatch(): special treatment for LFUN_WINDOW_CLOSE.
- workAreaIds(): new method.
- close(): new pure virtual method.
- saveGeometry(): new pure virtual method.
* GuiView:
- implements above changes.
- GuiView(): set WA_DeleteOnClose and Qt::WA_QuitOnClose to let Qt manage the destruction on close().
- closeEvent(): session stuff transfered to saveGeometry()
* WorkArea
- now store its id.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15514 a592a061-630c-0410-9148-cb99ea01b6c8
- Various micro-optimisations
- Revert Abdel's repaint instead of update for QPainter
- Get rid of unused methods in GuiWorkArea
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15491 a592a061-630c-0410-9148-cb99ea01b6c8
changing between using it and the keyboard-cursor
movements.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15473 a592a061-630c-0410-9148-cb99ea01b6c8
* Buffer: new changed() boost::signal.
* LyXView:
- redrawWorkArea(): deleted
- bufferChangedConnection_: new signal connection
* LyXFunc: replace LyXView::redrawWorkArea() direct call with Buffer::changed() signal emission.
* WorkArea.C: deleted some comments about redrawWorkArea.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15464 a592a061-630c-0410-9148-cb99ea01b6c8
- Add debugging input
- If cursor::dispatch does not handle the func, then it should not request an update
- Dump metrics cache after redraw
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15443 a592a061-630c-0410-9148-cb99ea01b6c8
* src/mathed/MathParser.C
(parse1): behave correctly when a wrong delimiter is specified.
* src/mathed/InsetMathBig.C
(write): don't write a space before delimiter.
* src/frontends/qt4/QDelimiterDialog.C
(QDelimiterDialog): make translatable the string "Variable size".
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15397 a592a061-630c-0410-9148-cb99ea01b6c8
Known problems:
- No space is output after a \hfill. I probably broke this with the
InsetCommand patch. I'll have a look later.
- Although the encoding is now UTF8 the arguments of the inputenc package
are still the old ones, so LaTeX will not run.
- Labels and references with non-ASCII characters are broken. This needs to
be fixed in lyx::support::escape(), but this is a file format change.
- Something seems to be wrong with index entries, but this is probably also
due to the InsetCommand changes.
Have fun!
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15378 a592a061-630c-0410-9148-cb99ea01b6c8
- Polish the behavior when the TOC is empty (clearing the button and the TOC tree)
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15373 a592a061-630c-0410-9148-cb99ea01b6c8
Now, lyx is really ready for multiple LyXView. Just need to create an LFUN for it.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15370 a592a061-630c-0410-9148-cb99ea01b6c8
This commit also modifies the LyXFunc class. A LyXView is not needed any more at construction. Neither is the top level keymap. The LyXFunc key sequences are initialized only if we are in GUI mode (lyx::use_gui = true).
The next step is to rename LyXFunc::owner to LyXFunc::lyx_view_ and to put some BOOST_ASSERT. A classification between Gui and Kernel oriented LFUNs would also be welcome.
*LyX/lyx_main.[Ch]:
- LyX::Singletons: new private structure containing all the singletons (except the main LyX one of course).
- buffer_list_, top_level_keymap, session_: transfered to the LyX::Singletons structure.
* LyXFunc:
- LyXFunc: default constructor does not need any arguments.
- setupLocalKeymap(): deleted (was not used anywhere).
- initKeySequences(): new public method called from lyx_main.C, useful only in lyx::use_gui mode.
- new private member accessor methods
* Application:
- Application_pimpl: deleted (transfered to LyX)
- global singleton accessors: transfered to lyx_main.C
- start(): code transfered to LyX::priv_exec()
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15367 a592a061-630c-0410-9148-cb99ea01b6c8
* src/insets/insetcommandparams.[Ch]:
(operator[]): New, access a parameter
(clear): New, clear all parameters
(info_): New, stire info about this command
(cmdname): Rename to name_
(contents, options, sec_options): Replace with params_. Parameters
are now stored as docstring.
(findInfo): New factor for command info for all commands
(read, write): Use new syntax
(parameter set and get methods): reimplemenmt for new parameter storage
* src/insets/insetcommand.h
(getParam): New, get a parameter
(setParam): New, set a parameter
(parameter set and get methods): Adjust to InsetCommandParams changes
* src/insets/insetbibitem.[Ch]
(write): Remove, not needed anymore
(directWrite): ditto
* src/insets/insetbibitem.C
(InsetBibitem::read): Use InsetCommand::read
* src/insets/insetref.C
(InsetRef::latex): Use new InsetCommandParams interface
* src/mathed/InsetMathHull.C
(InsetMathHull::doDispatch): ditto
* src/text3.C
(LyXText::dispatch): ditto
* src/factory.C
(createInset): Create InsetCommandParams with command name
(readInset): ditto
(readInset): Remove error message for bibitem, since bibitem is
now a normal command inset
* src/buffer.C: Bump file format number
* src/frontends/controllers/ControlCommand.[Ch]
(ControlCommand): take an additional command name parameter
* src/text.C
(readParToken): Remove code for \bibitem
* lib/lyx2lyx/LyX.py: Bump latest file format number
* lib/lyx2lyx/lyx_1_5.py
(convert_bibitem, convert_commandparams): new, convert to new format
(revert_commandparams): new, convert to old format
* development/FORMAT: document new format
* many other files: Adjust to the changes above
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15357 a592a061-630c-0410-9148-cb99ea01b6c8
* src/frontends/qt3/QDocumentDialog.C (updateNumbering): don't include headings
that have no counter in their label.
* src/frontends/qt3/ui/NumberingModuleBase.ui: show scrollbar when appropriate.
* src/frontends/qt4/QDocumentDialog.C (updateNumbering): don't include headings
that have no counter in their label.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15352 a592a061-630c-0410-9148-cb99ea01b6c8
* QToc::update(): return early if no TOC type.
* QTocDialog::updateGui(): return early of the Type model is empty and disable the outline buttons.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15346 a592a061-630c-0410-9148-cb99ea01b6c8
* lyx_main.h: define "extern bool lyx::use_gui" here.
* NoGuiFontMetrics.h: new class for command-line LyX
* NoGuiFontLoader.h: new class for command-line LyX
* Application.C:
- theFontMetrics(): returns the above dummy FontMetrics when use_gui is false.
- theFontLoader(): returns the above dummy FontLoader when use_gui is false.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15339 a592a061-630c-0410-9148-cb99ea01b6c8
* src/frontends/qt[34]/GuiApplication.C
(lyx::frontend::Application * createApplication): Don't return the
address of a temporary, but use the new operator.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15313 a592a061-630c-0410-9148-cb99ea01b6c8
* LyXFunc: new setLyXView() method
* LyXView::dispatch(): call LyXFunc::setLyXView() before lyx::dispatch()
What remains to be done is to ensure that every call to lyx::dispatch that is LyXView dependant is replaced with LyXView::dispatch().
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15308 a592a061-630c-0410-9148-cb99ea01b6c8
Only qt4 is guaranted to compile and work. I did not remove gtk and qt3 lyx_gui.C because they might be needed for reference to complete the header declarations in "GuiApplication.C".
- lyx_gui::use_gui transfered to lyx::use_gui in lyx_main.C
- all remaining lyx_gui functions transfered to Application and corresponding GuiApplication implementations.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15306 a592a061-630c-0410-9148-cb99ea01b6c8
- new buffer_list_ member and accessors
- implementation of theBufferList() extern function
* Application: remove everything related to BufferList
* lyx_cb.C: test for lyx::use_gui before using theApp.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15303 a592a061-630c-0410-9148-cb99ea01b6c8
export (e.g. the ToC) and the navigate menu.
* src/insets/insetbase.h
(InsetBase::plaintext): output to a docstream
(InsetBase::textString): ditto
* src/mathed/TextPainter.h
(TextPainter::show): ditto
* src/support/docstream.[Ch] New file and string streams for
docstring. The file streams convert to UTF8 on the fly.
* many more files: Adjust to the changes above
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15301 a592a061-630c-0410-9148-cb99ea01b6c8
* lyxfunc.h:
- theLyXFunc(): new function in the global namespace.
- lyx::dispatch(): new function in the lyx namespace.
- lyx::getStatus(): new function in the lyx namespace.
* bufferlist.h:
- theBufferList(): new function in the global namespace.
* Clipboard.h:
- theClipboard(): new function in the global namespace.
* Selection.h:
- theSelection(): new function in the global namespace.
* FontLoader.h:
- theFontLoader(): new function in the global namespace.
* FontMetrics.h:
- theFontMetrics(LyXFont const &): new function in the global namespace.
* Application.C: implements the functions defined above.
* LyXView.h:
- getLyXFunc(): deleted.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15298 a592a061-630c-0410-9148-cb99ea01b6c8
- text(): now returns drawn text width()
* rowpainter:
- paintChars(): use the returned width from Painter::text() instead of recalculating it.
All other files: implement the API change. qt3 and gtk not 100% guaranted to compile nor work.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15294 a592a061-630c-0410-9148-cb99ea01b6c8
* controllers/Dialog.[Ch]
- View::title_ is now a docstring (ctor and access functions changed)
* controllers/ControlLog.[Ch]
- title() now returns a docstring
* controllers/ControlLog.[Ch]
- title() now returns a docstring
* qt4/*: adapted to above changes.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15283 a592a061-630c-0410-9148-cb99ea01b6c8
* lstrings.[Ch]: new docstring trim() function
* qt4/validators.C: PathValidator::validate() and printable_list() converted to unicode.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15281 a592a061-630c-0410-9148-cb99ea01b6c8
- getChangeAuthor() and getChangeDate(): converted to unicode.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15279 a592a061-630c-0410-9148-cb99ea01b6c8
- ucs4_to_qchar() and qchar_to_ucs4() have been inlined.
- ucs4_to_qstring(): pass a QString to avoid a copy.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15266 a592a061-630c-0410-9148-cb99ea01b6c8
Basically, I replaced all methods in the font_metrics namespace by a proper virtual interface FontMetrics. The FontLoader is _the_ container for FontMetrics.
This patch should also bring some optimizations in a number of place in the code. This is because we do not need any more to search for the LyXFont at each font_metrics call. In effect, the speed advantage is not as sensible and this is a bit deceiving considering that this was my primary motivation behind the patch. But I like the patch anyway as it cleans up the relation and interfacing between fonts, metrics and frontends.
* frontends/FontMetrics.h: new virtual interface. Renamed from font_metrics.h
* qt4/GuiFontMetrics: corresponding qt4 implememtation. Renamed from qfont_metrics.C. The smallCaps particular case treatment has been transfered here as well as the width cache for MacOSX and Windows.
* qt4/QLPainter.C: the smallCapsText has been reworked to return the width of the drawn text.C
all other files: replace font_metric helper function call with corresponding FontMetrics method calls.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15265 a592a061-630c-0410-9148-cb99ea01b6c8
* frontends/FontLoader.h: new interface class.
* frontends/Application.h: new FontLoader() pure virtual method
* frontends/lyx_gui: update_fonts() and font_available() methods deleted
* [qt3/qt4/gtk]/GuiApplication: implement the new interface
* qt4/GuiFontLoader:
- renamed from FontLoader
- now derives from FontLoader
- now in the lyx::frontend namespace
* qt3/qfont_loader
- now derives from FontLoader
* gtk/xftFontLoader
- now derives from FontLoader
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15220 a592a061-630c-0410-9148-cb99ea01b6c8
* lyx_main.C and lyx_cb.C: use Application methods directly instead of the above functions.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15211 a592a061-630c-0410-9148-cb99ea01b6c8
virtual std::string const romanFontName() = 0;
virtual std::string const sansFontName() = 0;
virtual std::string const typewriterFontName() = 0;
My goal is to transfer all of "frontends/*/lyx_gui.C" to "frontends/lyx_gui.C". When this is done, "frontends/lyx_gui.C" can go altogether as its functions will then be replaced with direct calls to theApp->XXX().
* frontends/lyx_gui.C: new file with code transfered from [qt3,qt4,gtk]/lyx_gui.C
* frontends/Application: 3 new font related pure virtual methods
* [qt3,qt4,gtk]/GuiApplication: implement the above method with code transfered from lyx_gui.C
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15208 a592a061-630c-0410-9148-cb99ea01b6c8
* src/insets/insetgraphics.C
(findTargetFormat): return pdf for vector graphics
* src/format.h
(Flags): new enum describing format flags
(flags_): new member variable for format flags
(vectorFormat): new, tell whether a format can contain vector graphics
* src/format.C: adjust to flags changes
* src/frontends/qt[34]/QPrefsDialog.C
(QPrefsDialog::QPrefsDialog): handle new vector flag
(QPrefsDialog::switch_format): ditto
(QPrefsDialog::updateFormatsButtons): ditto
(QPrefsDialog::new_format): ditto
(QPrefsDialog::modify_format): ditto
* src/frontends/qt3/ui/QPrefFileformatsModule.ui
* src/frontends/qt4/ui/QPrefFileformatsUi.ui
(vectorCB): new checkbox for vector flag
* src/lyxrc.C
(LyXRC::read): read vector flag
(LyXRC::write): write vector flag
* lib/doc/Customization.lyx: document format flags
* lib/configure.py
(checkFormatEntries): Add vector flag to some formats
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15205 a592a061-630c-0410-9148-cb99ea01b6c8
* src/frontends/qt4/GuiView.C
(setGeometry): replace test for Q_OS_WIN32 with Q_WS_WIN
* src/support/fontutils.C:
If X_DISPLAY_MISSING is defined, compile the code for Win32
on cygwin, too.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15201 a592a061-630c-0410-9148-cb99ea01b6c8
A trivial (looking) patch to correct inset behavior, which is broken
with revision 15068. Without this patch, it is not possible to modify
an existing inset. All modifications processed as new index. (see
lyxfunc.C:1420)
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15199 a592a061-630c-0410-9148-cb99ea01b6c8
These font related functions were identical for qt3 and qt4. They are not Qt dependent at all and could also apply to an eventual Win32 or MacOSX gtk port.
Jen-Marc says: It would be nice to convince fontconfig to do the same for linux.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15196 a592a061-630c-0410-9148-cb99ea01b6c8
* gtk/qt3/qt4/GuiApplication: createView() method deleted
* LyXView:
- init(): is now a pure virtual method. autoSave code transferred to constructor and updates to the frontends.
- setGeometry(): new pure virtual method
* gtk/GView, qt3/QtView, qt4/GuiView: adapted to above change
- setGeometry(): code transfered from GuiApplication
* lyx_main.C: call LyX::ref().addLyXView() in there instead of in Application::createView()
*
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15183 a592a061-630c-0410-9148-cb99ea01b6c8
addWithStatus(). It also replaces LyXView uses with BufferView as none of the LyXView feature were used.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15181 a592a061-630c-0410-9148-cb99ea01b6c8
* BufferView
- layoutChanged: new boost signal.
- LyXView owner(), owner_: deleted
* text3.C
- emit BufferView::layoutChanged instead of calling LyXView::setLayout directly
- LFUN_MOUSE_RELEASE: delete LyXView updateMenubar() and updateToolbars() direct calls.
The update is of both bars is done in WorkArea::dispatch().
* WorkArea.C
- dispatch(): add LyXView updateMenubar() call.
* LyXView
- connects to BufferView::layoutChanged directly to Toolbars::setLayout()
- setLayout(): deleted.
* qt4/GuiImplementation: modify BufferView construction (without LyXView).
All other files: cleanup header declaration of LyXView.h
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15153 a592a061-630c-0410-9148-cb99ea01b6c8
(only on windows).
* src/frontends/Dialogs.C
(Dialogs::hide): Don't send the signal if we are quitting
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15116 a592a061-630c-0410-9148-cb99ea01b6c8
Most of qt3 and gtk should stay compilable except for LyXView.h because the LyXFunc instance has been transferred to Application.
* frontends/Application: new class aimed to be the one unique interface between the frontend and the kernel. Contains one global pointer to the unique instanciation theApp.
* frontends/qt4/GuiApplication: renamed from qt4/Application, the qt4 specialisation of the Application class. Contains one global pointer to the unique instanciation guiApp (equal to theApp but pointing to a GuiApplication instead).
* frontends/qt4/lyx_gui.C: most of the code has been moved to Application and GuiApplication
All other file: adapted to new API.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15114 a592a061-630c-0410-9148-cb99ea01b6c8
The associated WorkArea is then responsible to connect these signals to its LyXView parent.
* BufferView:
- showDialog, showDialogWithData, showInsetDialog: new boost signals
* LyXView:
- connectBufferView(), disconnectBufferView(): new method in charge of the connection/disconnection of the above signal to associate private methods (showDialog(), etc).
* WorkArea
- setBufferView(): will connect/disconnect the BufferView to its LyXView parent.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15068 a592a061-630c-0410-9148-cb99ea01b6c8
No scons and cmake support! scons and cmake need to find out the size of
wchar_t and define this macro in config.h (example for 32bit wchar_t):
* The size of a `wchar_t', as computed by sizeof. */
#define SIZEOF_WCHAR_T 4
* configure.ac: Test size of wchar_t
* src/support/types.h: don't include docstring.h anymore.
Use wchar_t as lyx::char_type if it is 32 bit wide.
* src/support/docstring.h: Use lyx::char_type for defining docstring
* src/metricsinfo.h: include support/docstring.h instead of
support/types.h
* src/lyxlex.h: ditto
* src/frontends/font_metrics.h: ditto
* src/frontends/qt4/qt_helpers.h: ditto
* src/frontends/Painter.h: ditto
* src/errorlist.h: ditto
* src/support/lstrings.h: ditto
* src/lyxfunc.h: ditto
* src/LaTeX.h: ditto
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@14991 a592a061-630c-0410-9148-cb99ea01b6c8
(QLPopupMenu::populate): Don't append a lyx::char_type to a qstring
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@14988 a592a061-630c-0410-9148-cb99ea01b6c8
* src/frontends/controllers/ControlMath.C
(latex_misc): Add intop and ointop
* lib/images/math/intop.xpm: New
* lib/images/math/ointop.xpm: Ditto
* lib/images/math/int.xpm: Add box to make the difference to intop clear
* lib/images/math/oint.xpm: ditto
* lib/Makefile.am: add new files
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@14924 a592a061-630c-0410-9148-cb99ea01b6c8
* Dialogs::disconnect(string const & name): check if the dialog is an inset before resetting open_insets_
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@14889 a592a061-630c-0410-9148-cb99ea01b6c8
* src/frontends/qt[34]/qt_helpers.[Ch]
(toqstr): add variant for docstring
(qstring_to_ucs4): Use docstring and port from qt4 to qt3
* Many other files: Many std::string -> lyx::docstring conversions
* src/support/lstrings.[Ch]
(subst): Add variant for docstring and char_type
(externalLineEnding): std::string -> lyx::docstring
(internalLineEnding): std::string -> lyx::docstring
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@14871 a592a061-630c-0410-9148-cb99ea01b6c8
* src/support/docstring.[Ch]
(from_ascii): new conversion function
(from_utf8): new conversion function
(to_utf8): new conversion function
(operator==) new, compare docstring and ASCII C string
(operator!=) new, compare docstring and ASCII C string
* src/support/Makefile.am: add new file docstring.C
* development/scons/scons_manifest.py: ditto
* src/funcrequest.[Ch]
(argument): change name to argument_ and type to docstring,
add an accessor
(FuncRequest): Add two new constructors taking a docstring argument
* all other files: adjust to the FuncRequest changes above
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@14861 a592a061-630c-0410-9148-cb99ea01b6c8
* qfont_metrics.C: make use of above methods instead of those in unicode.[Ch]
* QLPainter.C: ditto
* QLyXKeySym.C: ditto + simplification and a BOOST_ASSERT that verifies that the event is one char only.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@14852 a592a061-630c-0410-9148-cb99ea01b6c8
* src/frontends/qt4/GuiWorkArea.C
(GuiWorkArea::dropEvent): Use toLocalFile instead of toString,
because toString omits the first backslash of UNC paths.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@14846 a592a061-630c-0410-9148-cb99ea01b6c8
* LyXView: save two setLayout() calls that are done in updateLayoutChoice() anyway.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@14833 a592a061-630c-0410-9148-cb99ea01b6c8
Log:
* lyxfunc.C:
- LyXFunc::dispatch(): put some save guards before using
BufferView::cursor() and sendDispatchMessage().
* BufferView_pimpl.C
- BufferView::Pimpl::setBuffer(): return before if exiting.
* WorkArea.C:
- WorkArea::redraw(): update the toolbar when greying out.
* LyXView.C:
- LyXView::setBuffer(): sanitization
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@14815 a592a061-630c-0410-9148-cb99ea01b6c8
* src/frontends/qt4/Action.C (Action): do not set entry to
checkable by default; invoke update() to set it up.
(update): only set checkable property if needed.
* src/frontends/qt4/QLPopupMenu.C (populate): in the case of
a Command menu item, let Action set itself up.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@14811 a592a061-630c-0410-9148-cb99ea01b6c8
* config/lyxinclude.m4: reset release date for development versions.
* src/version.C.in: make lyx_release_date a placeholder.
* src/lyx_main.C (parse_version):
* src/frontends/controllers/ControlAboutlyx.C (getVersion): change a
bit the display of LyX release date.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@14712 a592a061-630c-0410-9148-cb99ea01b6c8
* src/CutAndPaste.C (setSelectionRange, replaceWord): remove.
(replaceSelectionWithString): select the new string after
replacement; add a bool parameter indicating in which sense the
selection is made.
* src/lyxfind.C (replace): adapt to above changes.
(find): comment out debug message.
* src/frontends/controllers/ControlSpellchecker.C (isLetter):
rename parameter.
(nextWord): take a LCursor as parameter; set the selection over
the word that has been found.
(check): adapt to changes above (the length of the word is not
necessarily the length of the selection -- fixes bug 2068).
(replace): use cap::replaceSelectionWithString
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@14708 a592a061-630c-0410-9148-cb99ea01b6c8
Log:
* BufferView/pimpl:
- scrollDocView(): call to BufferView::update() deleted.
- scrollDocView(): second part is now in setCursorFromScrollbar()
- setCursorFromScrollbar(): new method.
* WorkArea:
- setBufferView(): show the cursor immediately
- redraw(): call to updateScrollbar()
- updateScrollbar(): new method
- scrollBufferView(): fix it and show the cursor immediately.
* qt4/GuiWorkArea
- setScrollbarParams(): now disable the Qt scrollbar tracking.
- paintEvent(): scrollbar related code deleted
* qt3/QWorkArea
- setScrollbarParams(): now disable the Qt scrollbar tracking.
* qt3/QContentPane
- paintEvent(): scrollbar related code deleted
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@14704 a592a061-630c-0410-9148-cb99ea01b6c8
- simplify setting/unsetting of item
- consolidate 2 methods that set bulletSelected
- store character (int) instead of pointer to item
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@14672 a592a061-630c-0410-9148-cb99ea01b6c8
- src/support/unicode.[Ch]: new files with functions for converting
to and fro ucs4, ucs2 and utf8.
- src/support/docstring.h: specialization of basic_string that
holds a uint32_t internally.
- Several functions changed to use char_type instead of char or unsigned char.
- Qt3 and Qt4 sends ucs2 on to core
- Gtk sends ucs4 on to core
- Read and write utf-8 .lyx files.
- font_metrics and painter updated to handle ucs4 chars as input.
- Quite a bit of ugly compability code, conversion string->docstring, etc.
- Have fun...
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@14661 a592a061-630c-0410-9148-cb99ea01b6c8
I had no choice but to use string for the map key. This is
because the only information that could be passed to the controller is a
string.
With this new architecture, persistent error lists are now possible.
* Buffer
- errorList_, addError(), : deleted
- std::map<std::string, ErrorList> errorLists_ : new member
- errorList(std::string const & type): associated accessors
* buffer_funcs.C
- bufferErrors(Buffer const & buf, TeXErrors const & terr): now needs a third errorList argument
- bufferErrors(Buffer const & buf, ErrorList const & el): deleted.
* Converter
- convert(): now needs an ErrorList argument instead of filling the Buffer errorList member directly.
- runLaTeX(): ditto
- scanLog(): ditto
* CutAndPaste.C
- pasteParagraphList(): ditto
- pasteSelection(): ditto
* lyxtext.h/text.C
- readParagraph(): ditto
- LyXText::read(): ditto
* importer:
- Importer::Import(): ditto
* BufferView_pimpl.C
- loadLyXFile(): send the Buffer::errors() signal instead of calling LyXView::showErrorList() directly.
* exporter.C
- Export(): send the Buffer::errors() signal instead of calling LyXView::showErrorList() directly in lyxfunc.C
* ControlErrorList.C
- initialiseParams(): translation operation transfered here from LyXView::showErrorList().
* LyXView.C
- LoadLyXFile(): add a showErrorList("Parse") call.
- showErrorList(): simplified due to code transferred to the ControlErrorList.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@14652 a592a061-630c-0410-9148-cb99ea01b6c8
* src/frontends/gtk/GWorkArea.C
(GWorkArea::onScroll): redraw the workarea
(GWorkArea::onButtonPress): Call WorkArea::dispatch instead of
BufferView::workAreaDispatch in order to redraw the workarea
(GWorkArea::onButtonRelease): ditto
(GWorkArea::onMotionNotify): ditto
* src/frontends/WorkArea.h
(dispatch): make public
* src/frontends/qt3/QContentPane.C
(QContentPane::scrollBarChanged): redraw the workarea
(QContentPane::generateSyntheticMous): Call WorkArea::dispatch instead
of BufferView::workAreaDispatch in order to redraw the workarea
(QContentPane::mousePressEvent): ditto
(QContentPane::mouseReleaseEvent): ditto
(QContentPane::mouseMoveEvent): ditto
(QContentPane::doubleClickTimeout): ditto
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@14517 a592a061-630c-0410-9148-cb99ea01b6c8
* src/frontends/controllers/tex_helpers.h: doxyfy comment
* src/frontends/controllers/tex_helpers.C
(rescanTexStyles): Pop up a message box when TeXFiles.py fails
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@14488 a592a061-630c-0410-9148-cb99ea01b6c8
* src/lyxfunc.C
(quoteArg): new, quotes arguments for the "log" dialog
(LyXFunc::dispatch): quote log filename
* src/frontends/controllers/ControlLog.C
(ControlLog::initialiseParams): parse \" as " and \\ as \ in filename
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@14481 a592a061-630c-0410-9148-cb99ea01b6c8
TODO 1: All occurrences of "LyXView::showErrorList()" in the "kernel" should be replaced by a boost signal emission (Buffer::errors()). This signal is already connected to this showErrorList() slot.
TODO 2: The ErrorList mechanism is used wrongly in a number of place, most notably in "Converter.C". Instead of replacing the ErrorList in the "Buffer" class, the "Converter" class should maintain its own list instead and connect directly to the LyXView::showErrorList() slot.
Buffer:
* errorList_: new private member and associated access methods.
* setErrorList(): new accessor method.
* addError(): apend an error to the errorList_.
* error(): deleted.
* errors(): new boost signal, unused for now. Shall be used instead of LyXView::showErrorList().
LyXView:
* getErrorList(), addError(), errorlist_, errorConnection_: deleted.
* errorsConnection_: new boost connection for the Buffer::errors() signal.
lyx_main.C:
* LyX::exec2(): manually print all errors.
BufferView.h: remove unneeded ErrorList forward declaration.
BufferView::pimpl::menuInsertLyXFile(): delete Buffer::error() connection and add a FIXME comment
text.C: Use Buffer::addError() instead of Buffer::error() signal emission.
ControlErrorList.C: get the ErrorList from the Buffer instead of LyXView
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@14467 a592a061-630c-0410-9148-cb99ea01b6c8
With this change, the only difference between BufferView.h and BufferView_pimpl.h is "cursor.h" so I think it is time to merge the two classes at last.
BufferView:
* showErrorList(), getErrorList(): transfered to LyXView.
BufferView::pimpl
* addError(), showReadonly(), connectBuffer(), disconnectBuffer(): transfered to LyXView.
CutAndPaste.C: adapted to API changes
frontends/controllers/ControlErrorList.C: ditto
lyxfunc.C: ditto
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@14458 a592a061-630c-0410-9148-cb99ea01b6c8
The performance may suffer a bit because we do the second drawing step in all cases. This could be possibly optimized out by checking the return value of the BufferView::update() method in "lyxfunc.C:1610". But it is maybe better to keep those two parts of the frontend ignorant of each other: the event handling and the drawing.
BufferView:
* needRedra(), need_redraw_: deleted.
* updateMetrics(): now public.
* update(): only do the first drawing step. Returns true if a full updateMetrics is needed before drawing on screen.
WorkArea:
* redraw(): no check on BufferView::needRedraw(), call updateMetrics() unconditionally.
* processKeySim(): uneeded "redraw()" call commented out. When/if the call to LyXView::redrawWorkArea() in "lyxfunc.C:1610" is not needed anymore, this line should be uncommented out.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@14456 a592a061-630c-0410-9148-cb99ea01b6c8
* src/LyXAction.C
(LyXAction::init): handle new LFUN_CLIPBOARD_PASTE
* src/insets/insettabular.C
(InsetTabular::doDispatch): ditto
* src/insets/insetbox.C
(InsetBox::doDispatch): ditto
* src/insets/insetert.C
(InsetERT::doDispatch): ditto
(InsetERT::getStatus): ditto
* src/insets/insetcharstyle.C
(InsetCharStyle::doDispatch): ditto
* src/BufferView_pimpl.C
(BufferView::Pimpl::selectionRequest): stuff selection, not clipboard
* src/mathed/math_nestinset.C
(MathNestInset::lfunMousePress): get stuff selection, not clipboard
(MathNestInset::lfunMouseRelease): clipboard -> selection in
commented code
* src/CutAndPaste.C
(cutSelection): ditto
* src/frontends/{qt3,gtk}/GuiImplementation.C
(GuiImplementation::newWorkArea): create new selection, not clipboard,
since the clipboard is now an object
(GuiImplementation::destroyWorkArea): destroy selection, not clipboard
* src/frontends/{qt4,qt3,gtk}/GuiSelection.h: new, copied from
GuiClipboard.h
* src/frontends/{qt4,qt3,gtk}/GuiSelection.C: new, copied from
GuiClipboard.C
* src/frontends/{qt3,gtk}/GuiImplementation.h
(selection): new accessor for selection_
(selection_): new, the global selection object
* src/frontends/{qt4,qt3,gtk}/Makefile.am: add GuiSelection.C and
GuiSelection.h
* src/frontends/{qt4,qt3,gtk}/GuiClipboard.C
(GuiClipboard::get): return clipboard, not selection
(GuiClipboard::put): stuff clipboard, not selection
* src/frontends/{qt4,qt3,gtk}/GuiClipboard.h
(haveSelection): remove (this is now in GuiSelection)
* src/frontends/{qt3,gtk}/GuiClipboard.h
(old_work_area_): remove, since it is not needed anymore
* src/frontends/gtk/ghelpers.C
(getGTKStockIcon): handle LFUN_CLIPBOARD_PASTE
* src/frontends/Clipboard.h
(haveSelection): remove (this is now in Selection)
* src/frontends/qt4/GuiImplementation.[Ch]
(GuiImplementation::selection): new accessor for selection_
* src/frontends/Gui.h
(selection): New accessor for the global selection object
* src/frontends/Selection.h; new, copied from Clipboard.h
* src/frontends/Makefile.am: add Selection.h
* src/text3.C
(various): s/clipboard().haveSelection/selection().haveSelection/
(LyXText::dispatch): handle LFUN_CLIPBOARD_PASTE
(LyXText::getStatus): ditto
* src/lfuns.h: new lfun LFUN_CLIPBOARD_PASTE
* lib/ui/stdmenus.ui: add new lfun LFUN_CLIPBOARD_PASTE
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@14408 a592a061-630c-0410-9148-cb99ea01b6c8
* rowpainter:
- paintText: take the painter as an argument
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@14384 a592a061-630c-0410-9148-cb99ea01b6c8
* frontends/WorkArea:
- processKeySym(): new method that should be used by all frontends
instead of buffer_view_->workAreaKeyPress().
* frontends/qt4/GuiWorkArea:
- keyPressEvent(): call WorkArea::processKeySym() instead of
buffer_view_->workAreaKeyPress().
* frontends/gtk/GWorkArea.C:
* frontends/qt3/QContentPane.C:
- call WorkArea::processKeySym() instead of
buffer_view_->workAreaKeyPress()
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@14383 a592a061-630c-0410-9148-cb99ea01b6c8
* frontends/LyXView:
- redrawWorkArea(): new temporary method called from within
BufferView::pimpl::update() that calls WorkArea::redraw()
in order to do the actual screen redrawing.
* frontends/WorkArea:
- the redraw() method now check if the the attached bufferView
needs a screen redraw().
* BufferView:
- needsRedraw(): new method for WorkArea::redraw()
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@14381 a592a061-630c-0410-9148-cb99ea01b6c8
* src/frontends/controllers/ControlPreamble.[Ch]:
remove files, since this controller was only used
by the xforms frontend
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@14352 a592a061-630c-0410-9148-cb99ea01b6c8
- Change unsigned -> signed
- Change signed -> unsigned
- Add a cast or two (really few of those)
- Remove/comment out unused variables
- Comment out unused arguments
- Add missing cases to switches.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@14344 a592a061-630c-0410-9148-cb99ea01b6c8
* src/main.C
(main): return LyX::exec()
* src/frontends/{gtk,qt3,qt4}/lyx_gui.C
(lyx_gui::exec): Change return value to int
(lyx_gui::start): ditto
* src/frontends/qt[3,4]/lyx_gui.C
(lyx_gui::exit): Call QApplication::exit instead of ::exit, this
hack is not needed anymore
* src/frontends/lyx_gui.h
(lyx_gui::exec): Change return value to int
(lyx_gui::start): ditto
* src/lyxtextclasslist.[Ch]
(LyXSetStyle): SChange return value to bool and don't call ::exit
* src/lyx_main.C
(showFileError): Don't exit anymore
* src/lyx_main.[Ch]
(LyX::exec): Change return value to int
(LyX::priv_exec): ditto
(LyX::exec2): ditto
(LyX::init): Change return value to bool
(LyX::readRcFile): ditto
(LyX::readUIFile): ditto
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@14339 a592a061-630c-0410-9148-cb99ea01b6c8
* BufferView, BufferView::pimpl:
- metrics_info_: private variable holding ViewMetricsInfo
- viewMetricsInfo(): accessor function
- updateMetrics(): renamed from metrics(), sets metrics_info_
- update(): change to use updateMetrics()
* frontends/WorkArea:
- redraw(): get the ViewMetricsInfo through accessor to BufferView.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@14331 a592a061-630c-0410-9148-cb99ea01b6c8
* BufferView,BufferView::Pimple:
- workArea_ removed
* frontends/LyXView:
- now contains a pointer reference to the current
WorkArea instead of the BufferView.
- workArea(): temporary access method
* frontends/WorkArea:
- bufferView(): new access methods.
* GuiImplementation: updated due to above changes
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@14329 a592a061-630c-0410-9148-cb99ea01b6c8
* src/support/os.[Ch]
(python): new function, return the python command
* lib/lyx2lyx/lyx_1_5.py
(revert_font_settings): replace tabs with spaces
The rest is simply s/python/python -tt/ and
s/"python"/lyx::support::os::python()/ where appropriate.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@14270 a592a061-630c-0410-9148-cb99ea01b6c8
- natbib style (the combox) works
- when moving/up down the item stays selected (allowing sequential ups/downs)
- when deleting the next selected entry gets focus (allowing sequential deletes)
- the info is now shown and updated
- find subsets the available entries as you type
- no additional find dialog (removed QCitationFind.ui)
- selecting with double-click
- removal of unused: Citation class, toVector() function
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@14252 a592a061-630c-0410-9148-cb99ea01b6c8
* src/frontends/xforms/FormSpellchecker.C (update):
* src/frontends/qt[34]/QSpellchecker.C (update_contents): fix bug
2218: Spellchecker doesn't pop up dialogue window for the first
misspelled word.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@14246 a592a061-630c-0410-9148-cb99ea01b6c8
* lyx_main.C set width and height to 0
* frontends/qt3/lyx_gui.C test on 0
* frontends/qt4/lyx_gui.C test on 0
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@14235 a592a061-630c-0410-9148-cb99ea01b6c8
* QLPainter::start() now re-initialize qp_
* QLPainter::end() now end qp_
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@14184 a592a061-630c-0410-9148-cb99ea01b6c8
* qt4/Application.[Ch]: was not merged (GUI API cleanup merge) for an unknown reason
* qt4/clipboard.C: ditto
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@14153 a592a061-630c-0410-9148-cb99ea01b6c8
* lib/lyx2lyx/LyX.py (format_relation): add file format 247 (from Georg BAUM).
* lib/lyx2lyx/lyx_1_5.py: add convert_font_settings, revert_font_settings (from Georg BAUM).
* lib/chkconfig.ltx: Test for newly supported font packages
* lib/doc/LaTeXConfig.lyx.in: document newly supported font packages
* lib/doc/UserGuide.lyx: document new UI.
* lib/doc/Extended.lyx: update PostScript font documentation
* development/FORMAT: document file format change 246->247.
* src/tex-strings.[Ch]: new strings tex_fonts_roman, tex_fonts_sans,
tex_fonts_monospaced (with GUI equivalents).
* src/buffer.C: Format up to 247.
* src/bufferparams.C:
new params fontsRoman, fontsSans, fontsTypewriter, fontsDefaultFamily,
fontsSC, fontsOSF, fontsSansScale and fontsTypewriterScale
(LyXFont const BufferParams::getFont): consider switch of default family.
(string const BufferParams::loadFonts): new method to get all the LaTeX
font stuff done.
* src/paragraph.C
(LyXFont const Paragraph::getFont):
(LyXFont const Paragraph::getLabelFont):
(LyXFont const Paragraph::getLayoutFont): user buffer's not textclass's
default font
* src/text.C
(int LyXText::leftMargin):
(int LyXText::rightMargin): user buffer's not textclass's default font
* src/text2.C
(LyXFont LyXText::getFont):
(LyXFont LyXText::getLayoutFont):
(LyXFont LyXText::getLabelFont): check if the family of the default document
font has been customized.
* src/frontends/gtk/GDocument.[Ch]: implement new font ui (from Georg BAUM).
* src/frontends/gtk/glade/document.glade: implement new font ui (from Georg BAUM).
* src/frontends/qt3/Makefile.dialogs: add new FontModuleBase
* src/frontends/qt3/ui/FontModuleBase.ui: new File
* src/frontends/qt3/ui/TextLayoutModuleBase.ui: remove font widgets
* src/frontends/qt3/QDocument.C
* src/frontends/qt3/QDocumentDialog.[Ch]: implement new font ui
* src/frontends/qt4/Makefile.dialogs: add new FontUi
* src/frontends/qt4/QDocumentDialog.[Ch]: implement new font ui
* src/frontends/qt4/ui/FontUi.ui: new File
* src/frontends/qt4/ui/TextLayoutUi.ui: remove font widgets
* src/frontends/qt4/ui/compile_uic.sh: add new FontUi
* src/frontends/xforms/FormDocument.[Ch]: implement new font ui
* src/frontends/xforms/forms/form_document.fd: add new font tab.
* src/frontends/controllers/ControlDocument.[Ch]
(char ControlDocument::fontfamilies):
(char ControlDocument::fontfamilies_gui):
(bool ControlDocument::isFontAvailable):
(bool ControlDocument::providesSC):
(bool ControlDocument::providesOSF):
(bool ControlDocument::providesScale): new methods, providing font info.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@14143 a592a061-630c-0410-9148-cb99ea01b6c8
Don't use multiple QPainter::begin on the same QPaintDevice.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@14101 a592a061-630c-0410-9148-cb99ea01b6c8
* src/lyx_cb.C
(quitLyX): lyx_gui::exit takes now an argument
* src/frontends/{gtk,xforms}/lyx_gui.C
(lyx_gui::parse_init): rename to lyx_gui::exec and call LyX::exec2
(void lyx_gui::exit): add exit status argument
* src/frontends/qt{3,4}/lyx_gui.C
(cleanup): new function for pointer cleanup
(lyx_gui::parse_init): rename to lyx_gui::exec and call LyX::exec2,
turn static variables into automatic variables
(void lyx_gui::exit): add exit status argument
(start): Use cleanup()
(exit): ditto
* src/frontends/lyx_gui.h
(parse_init): remove
(exec): new
(exit): Take exist status argument
* src/lyx_main.[Ch]
(LyX::priv_exec): split into LyX::priv_exec and LyX::exec2
* src/lyx_main.C
(lyx_exit): New, choose the right exit function
(showFileError): call lyx_exit
(LyX::queryUserLyXDir): ditto
(LyX::init): ditto
(LyX::priv_exec): ditto
(LyX::priv_exec): Replace want_gui by lyx_gui::use_gui
(LyX::priv_exec): replace lyx_gui::parse_init by lyx_gui::exec and
exec2
(LyX::init): Replace gui argument by lyx_gui::use_gui
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@14036 a592a061-630c-0410-9148-cb99ea01b6c8
* src/frontends/ALLFRONTENDS/lyx_gui.C: use passed width/height/posx/posy in lyx_gui::start
* src/frontends/lyx_gui.h: prototype change for lyx_gui::start
* src/lyx_main.C: determine windows size and position from lyxrc or session.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@13953 a592a061-630c-0410-9148-cb99ea01b6c8
TODO: reorganize this code. In particular make sure that this advise from Qt documentation is respected:
Since the QApplication object does so much initialization, it must be created before any other objects related to the user interface are created.
Right now this is not the case. For example, "FontLoader::initFontPath()" is called before the QApplication creation. Moreover, I suspect that a number of global variables contains Qt object that are initialized before the passage through parse_init(). This might also explain the message displayed by Qt that caused the hanging:
QObject::killTimer: timers cannot be stopped from another thread
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@13948 a592a061-630c-0410-9148-cb99ea01b6c8
"Don't view/edit this format", and 'auto' means "Use the default viewer/editor".
* src/format.C
(fixCommand): Change semantics: "none" is equal to "", and "auto"
is removed if canAutoOpenFile returns false.
* src/frontends/xforms/FormPreferences.C
(FormPreferences::SpellOptions::apply): "none" -> ""
* src/lyxrc.C
(LyXRC::read): "none" -> ""
* lib/doc/Customization.lyx: Document the autoopen feature
* lib/configure.py
(checkProg): add optional not_found argument, defaulting to 'none'
(checkViewer): new, equivalent to checkProg with not_found = 'auto'
(checkFormatEntries): call checkViewer instead of checkProg for
viewers and editors
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@13929 a592a061-630c-0410-9148-cb99ea01b6c8
qt4/qfont_loader.h: reverted to last version and added comment about pointer reference.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@13927 a592a061-630c-0410-9148-cb99ea01b6c8
(document_): new flag, telling whether this is a document format and
we want to show this format in the export and view menus
(documentFormat): accessor for document_
* src/format.h: Add some documentation
* src/frontends/qt3/QPrefsDialog.C
(QPrefsDialog::QPrefsDialog): handle new documentCB checkbox
(QPrefsDialog::switch_format): ditto
(QPrefsDialog::updateFormatsButtons): ditto
(QPrefsDialog::new_format): ditto
(QPrefsDialog::modify_format): ditto
* src/frontends/qt3/ui/QPrefFileformatsModule.ui: Add documentCB checkbox
* src/frontends/qt4/QPrefsDialog.C
(QPrefsDialog::QPrefsDialog): handle new documentCB checkbox
(QPrefsDialog::switch_format): ditto
(QPrefsDialog::updateFormatsButtons): ditto
(QPrefsDialog::new_format): ditto
(QPrefsDialog::modify_format): ditto
* src/frontends/qt4/ui/QPrefFileformatsUi.ui: Add documentCB checkbox
* src/frontends/xforms/FormPreferences.C
(FormPreferences::Formats::build): handle new check_document checkbox
(FormPreferences::Formats::input): ditto
(FormPreferences::Formats::Add): ditto
(FormPreferences::Formats::Browser): ditto
* src/frontends/xforms/forms/form_preferences.fd: Add check_document
checkbox
* src/lyxrc.C
(LyXRC::read): Remove compatibility code for 1.3 \format entries.
Read the new format flags (but don't require them for 1.4
compatibility)
(LyXRC::write): Write the new format flags
* src/MenuBackend.C
(expandFormats): Remove the hardcoded exception for image formats
and use Format::isDocument() instead
* lib/doc/Customization.lyx: Document auto viever/editor and the
"document format" flag
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@13887 a592a061-630c-0410-9148-cb99ea01b6c8
* panelstack.C: automatic creation of parent category if not already created.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@13886 a592a061-630c-0410-9148-cb99ea01b6c8
* src/frontends/qt4/qfontloader.C (initFontPath, ~FontLoader): add fonts in
lyxdir/fonts to system fonts in windows; remove them in destructor.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@13877 a592a061-630c-0410-9148-cb99ea01b6c8
atm this does not work because it depends on the order in which these entries were added.
now the order is alphabetical and things are messed up.
the attached patch adds the nr of the format/converter to the listwidgetitem as a type and uses that to get to the right details
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@13864 a592a061-630c-0410-9148-cb99ea01b6c8
Can you move the SUBDIRS var back to the top of the file pleae.
Also EXTRA_DIST should be at the top.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@13863 a592a061-630c-0410-9148-cb99ea01b6c8
* configure.ac: removed frontends/qt4/moc compilation.
* frontends/qt4/: moc files (*_moc.cpp) are now included at the end of relevant source file (*.C)
* SConscript: adapted to "moc included in .C file" change.
* frontends/qt4/Makefile.am: adapted to "moc included in .C file" change.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@13860 a592a061-630c-0410-9148-cb99ea01b6c8
* SConstruct: force the use of g++ under windows, and use the right libraries
* config/qt4.py: check QtGui4 etc as well.
* src/SConscript: link to the right libraries
* src/tex2lyx/SConscript: use the right libraries
* src/frontends/qt3/SConscript: manually moc .h files under windows
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@13814 a592a061-630c-0410-9148-cb99ea01b6c8
adjust some commands according to the LyX naming conventions
(toggle-tooltip => tooltip-toggle, *-change(s) => change(s)-*)
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@13811 a592a061-630c-0410-9148-cb99ea01b6c8
browsebox is not build anymore and commented out in bulletsmodule
bullets are disabled in documentdialog: wasn't working before either
remove qt3support!
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@13809 a592a061-630c-0410-9148-cb99ea01b6c8
Index: src/frontends/qt4/QCitationDialog.C
Index: src/frontends/qt4/QCitationDialog.h
Index: src/frontends/qt4/ui/QCitationFindUi.ui
Index: src/frontends/qt4/QPrefsDialog.C
Index: src/frontends/qt4/QPrefsDialog.h
Index: src/frontends/qt4/ui/QPrefColorsUi.ui
Index: src/frontends/qt4/ui/QPrefCopiersUi.ui
Index: src/frontends/qt4/ui/QPrefFileformatsUi.ui
Index: src/frontends/qt4/ui/QPrefConvertersUi.ui
Index: src/frontends/qt4/QParagraphDialog.C
no more qt3 drag n drop:
Index: src/frontends/qt4/QWorkArea.C
as discussed on list:
Index: src/frontends/qt4/QLyXKeySym.C
Index: src/frontends/qt4/QLyXKeySym.h
bit of repair here:
Index: src/frontends/qt4/ui/QAboutUi.ui
Index: src/frontends/qt4/QAbout.C
bit of cleaning here (no separate color column, but rather icon)
Index: src/frontends/qt4/QBranches.C
got rid of this altogether:
Index: src/frontends/qt4/qcoloritem.C
Index: src/frontends/qt4/qcoloritem.h
Index: src/frontends/qt4/Makefile.am
+ filedialog to qt4 one
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@13805 a592a061-630c-0410-9148-cb99ea01b6c8
* src/frontends/qt3/ui/moc/Makefile.am: ditto
* src/frontends/qt3/ui/*.ui: Add extra includes to the
implementation rather than the declaration
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@13789 a592a061-630c-0410-9148-cb99ea01b6c8
* src/frontends/qt3/moc/Makefile.am: Add src/frontends/qt3 to includes
* src/frontends/qt3/ui/moc/Makefile.am: ditto
* src/frontends/qt3/ui/*.ui: Convert to qt3 format, no functional
change
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@13787 a592a061-630c-0410-9148-cb99ea01b6c8
* src/frontends/qt3/QPrefs.C, QPrefsDialog.C, ui/QPrefUIModule.ui: add two checkboxes
* src/lyxrc.C: turn off load_session by default (since we now can turn it on)
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@13741 a592a061-630c-0410-9148-cb99ea01b6c8
* toc.[Ch]:
- rewritten to take advantage of new TocBackend class. The toc
cache is implemented as a static variable:
static map<Buffer const *, lyx::TocBackend> toc_backend_;
* buffer_funcs.C:
updateLabels(Buffer const & buf) now calls
"lyx::toc::updateToc(buf);"
* pariterator.h: added default constructor
ParConstIterator(): DocIterator() {}
* insetfloat.C: added pit parameter to TocItem construction
* insetwrap.C: added pit parameter to TocItem construction
* MenuBackend.C: use a const ref instead of a copy of TocList
* ControlToc.[Ch]: optimisation of the API by using const reference instead of copy.
* qt4/TocPanel.[Ch]:
- optimisation of the API by using const reference instead of
copy
- directly use of TocBackend::TocIterator instead of identification by paragraph contents.
* qt4/QToc.C:
- optimisation of the API by using const reference instead of
copy
- makes use of TocBackend::Item::uid()
* qt2/QToc.C:
- use TocItem::depth() and TocItem::str() instead of public member access.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@13713 a592a061-630c-0410-9148-cb99ea01b6c8
* Toc.[Ch]: new function getCurrentTocItem()
* ControlToc.[Ch]: new function getCurrentTocItem()
* QToc.[Ch]: new function getCurrentIndex()
* QTocDialog.C
- QTocDialog::update() calls QToc::getCurrentIndex()
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@13695 a592a061-630c-0410-9148-cb99ea01b6c8
- bool ControlToc::canOutline(): new method to test if outline is possible.
* TocModel: new class
* QToc is now the controller (inheriting ControlToc directly) and the model (using TocModel)
* QTocDialog is now only the view (inheriting Dialogs::View directly)
* Dialogs.C: updated toc controller and view correspondingly
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@13692 a592a061-630c-0410-9148-cb99ea01b6c8
* BufferView_pimpl.h: delete LyXKeySymPtr typedef
* kbmap.h: include LyXKeysym.h and remove forward declaration of LyXKeySym,
and delete LyXKeySymPtr typedef
* kbsequence.h:
* frontends/WorkArea.h: delete LyXKeySymPtr typedef, include LyXKeySym.h
and don't include boost/shared_ptr.hpp, remove forward declaration of
LyXKeySym.
* frontends/LyXKeySym.h: include boost/shared_ptr.hpp, and add typedef
for LyXKeySymPtr
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@13663 a592a061-630c-0410-9148-cb99ea01b6c8
In frontend/qt4/Dialog.C, we use these class like this:
} else if (name == "citation") {
QCitation * ci = new QCitation(*dialog);
dialog->setController(ci);
dialog->setView(new QCitationDialog(*dialog, ci));
dialog->bc().bp(new NoRepeatedApplyReadOnlyPolicy);
Now, it should be possible to define another view like this:
} else if (name == "citation-inline") {
QCitation * ci = new QCitation(*dialog);
dialog->setController(ci);
dialog->setView(new QCitationInline(*dialog, ci));
All the citation functionalities are not there yet but the basic ones are there. There are still a few "intelligence" still to be transfered from the view to the dialog.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@13635 a592a061-630c-0410-9148-cb99ea01b6c8
* src/text3.C, src/lyxfunc.C: no special treatment of view-source dialog now.
* src/frontends/controllers/ControlViewSource.h, .C:
handle everything (get source type, code) in the controller.
* src/insets/insetbibtex.C, insetexternal.C insetinclude.C:
add dryrun mode to file copying etc.
* src/frontends/qt2/QViewSource.C: small changes when calling the controller.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@13627 a592a061-630c-0410-9148-cb99ea01b6c8
QMathDialog.C: set icon paths
QMathUi.ui: set icon paths to lib/images/math for visual feedback in designer
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@13614 a592a061-630c-0410-9148-cb99ea01b6c8
* paragraph.h: make value_type point at char_type
* other files: change some bald 'char' to 'char_type'
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@13609 a592a061-630c-0410-9148-cb99ea01b6c8
capitalized to have first letter lowercased.
* Adjust all affected files.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@13605 a592a061-630c-0410-9148-cb99ea01b6c8
letter start with a lower letter.
* All other .C and .h in the cs: adjust for above change
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@13603 a592a061-630c-0410-9148-cb99ea01b6c8
QtView.C: typo in include
QPrefsDialog.C: update after changing color
QPrefsDialog.h: default parent in constructor
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@13580 a592a061-630c-0410-9148-cb99ea01b6c8
- replaced the sqrt etc QPushButton with QToolButton
- modified the layout
* QMathDialog::QMathDialog
- got rid of the fixed width for function QWidgetList
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@13571 a592a061-630c-0410-9148-cb99ea01b6c8
session support that
* handle recent opened files (previously lastfile)
* save/load bookmarks when quit lyx
* save/load buffer cursor location whan a file is closed
* save/load windows position and size when a file is closed
* add rc entries load_session, use_lastfilepos,
screen_geometry_height, screen_geometry_width,
screen_geometry_xysaved.
* trigger LFUN_QUIT when Alt-F4 or close-button is used to close lyx.
* remove lastfile.h lastfile.C (merged in session.h, session.C)
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@13561 a592a061-630c-0410-9148-cb99ea01b6c8
* src/frontends/qt2/QPrefs.C:
(internal_path_list, external_path_list): Handle the PATH prefix
style according to the user-prefs style.
(QPrefs::apply, QPrefs::update_contents): fix inverted logic of
rc.cygwin_path_fix
* src/support/os.h: New declarations to deal with PATH lists.
* src/support/os_cygwin.C: Major rewrite to account for path style
problems.
* src/support/os_unix.C:
* src/support/os_win32.C: Stub functions for PATH lists.
* src/support/environment.C: fix bug 2344: Wrong path_prefix handling
in cygwin
* src/support/filetools.C (ChangeExtension): fix for the path
style to be written in .tex files (cygwin related).
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@13558 a592a061-630c-0410-9148-cb99ea01b6c8
* QMathUi.ui: Port to Qt4, icons paths are hacked to point to ../lib/images/
* QMathDialog: Port to qt4
* iconpalette.C: fix cols calculation
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@13557 a592a061-630c-0410-9148-cb99ea01b6c8
The Toc dialog is not finished yet, there's some clean-up to do especially in select_adapdator which doesn't seem to work. This makes lyx crash when clicking on the Up, Down, In or Out buttons.
* frontends/qt4/QTocDialog.[Ch]: add automatic slots
* frontends/qt4/QTocDialog.[Ch]: add "enableButtons(bool)"
* frontends/qt4/ui/QTocUi.ui: add pushbuttons
* frontends/qt4/QToc.[Ch]: add move* methods.
The following Qt4 equivalent changes to revision r13521 are not done yet:
* frontends/qt2/QToc.[Ch]: add move* method.
(QToc::updateToc):
(QToc::select): add code for TOC window positioning, and
outlining methods
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@13530 a592a061-630c-0410-9148-cb99ea01b6c8
Prevent deletion of file formats if they are used by a converter
and warn the user accordingly.
Fixes crash (bug 2431).
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@13514 a592a061-630c-0410-9148-cb99ea01b6c8
* QCitationDialog::on_applyPB_clicked(): calls form_->apply
* QCitationDialog::on_oKPB_clicked(): calls form_->apply
TBDone: extract the code from controller&co in order to update the view with a new citation inset (or a modified one).
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@13499 a592a061-630c-0410-9148-cb99ea01b6c8
- two panes for Selected/Available keys
- find as you search (Regular expression are supported)
- advanced search button
There are a lot of work still:
- selected citations are not inserted in the document
- find does not select the found key
- the graying/un-graying of buttons does not work properly
- the Advanced Search Dialog (which will search inside the citation) is not done yet
- ...
But the good news is that I have used the Model/View separation of Qt4. QCitation contains the list models and QCitationDialog contains the list views. The idea would be to reuse the model for a new dialog, I am thinking of a simple combo box placed on the toolbar which insert citations with default style, etc. Or a context menu insert->citation...
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@13496 a592a061-630c-0410-9148-cb99ea01b6c8
(void QDocumentDialog::apply):
(void QDocumentDialog::update_contents): only take action when there is a ToC structure
* port of preampleUi from Q3MultilineEdit to QTextEdit.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@13485 a592a061-630c-0410-9148-cb99ea01b6c8
* src/bufferparams.C
(bool BufferParams::writeLaTeX):
(void BufferParams::useClassDefaults): only take action when there is
a ToC structure
* src/frontends/qt2/QDocument.C
(void QDocument::apply):
(void QDocument::update_contents): only take action when there is
a ToC structure
* src/frontends/xforms/FormDocument.C
(bool FormDocument::language_apply):
(bool FormDocument::options_apply):
(void FormDocument::options_update): only take action when there is
a ToC structure; disable
(void FormDocument::UpdateClassParams): disable the secnumdepth and
tocdepth widgets when there is no ToC structure
* src/frontends/xforms/FormDocument.h
(options_apply): do not return a bool (was not used)
* src/lyxtextclass.C
(hasTocLevels): new method.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@13471 a592a061-630c-0410-9148-cb99ea01b6c8
* src/frontends/xforms/Color.[Ch]: move to src
* src/Color.[Ch] (getRGBColor): move to src/frontends/*/lyx_gui.C
* src/BranchList.h
(Branch::color_): change type to lyx::RGBColor
* src/BranchList.[Ch]
(Branch): new constrcutor, set color_ to LColor::background
(getColor, setColor): adapt to type change of color_
* src/bufferparams.C
(BufferParams::writeFile): adapt to type change of branch color
* src/frontends/lyx_gui.h
* src/frontends/gtk/lyx_gui.C
* src/frontends/qt2/lyx_gui.C
* src/frontends/qt4/lyx_gui.C
* src/frontends/xforms/lyx_gui.C
(getRGBColor): move from src/Color.[Ch] here
* src/frontends/gtk/lyx_gui.C
* src/frontends/xforms/lyx_gui.C
(hexname): use getRGBColor
* src/frontends/gtk/GDocument.C
(update): adapt to type change of branch color
(apply): add comment about color chooser
* src/frontends/qt2/QDocumentDialog.C
(updateBranchView): adapt to type change of branch color
(toggleBranchColor): ditto
* src/frontends/qt2/lcolorcache.[Ch]
* src/frontends/qt4/lcolorcache.[Ch]
(rgb2qcolor): new utility function
* src/frontends/qt4/QBranches.C
(QBranches::update): adapt to type change of branch color
(QBranches::on_colorPB_clicked): ditto
* src/frontends/xforms/FormDocument.C
(get_current_color): adapt to type change of branch color
(FormDocument::branch_update):
* src/frontends/xforms/FormPreferences.C
(FormPreferences::Colors::LoadBrowse): adapt to RGBColor changes
* src/frontends/xforms/FormPreferences.h: remove unneeded RGBColor
forward declaration
* src/frontends/xforms/XWorkArea.C
(XWorkArea::XWorkArea): adapt to RGBColor changes
* src/frontends/xforms/Makefile.am: remove Color.[Ch]
* src/frontends/xforms/FormColorpicker.[Ch]: adapt to RGBColor changes
* src/frontends/xforms/xformsImage.C: adapt to RGBColor changes
* src/frontends/controllers/ControlDocument.C
(ControlDocument::dispatchParams): adapt to type change of branch color
* src/Makefile.am: add Color.[Ch]
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@13466 a592a061-630c-0410-9148-cb99ea01b6c8
* QDialogView.h: interface methods and slots are now public instead of protected. This allow to avoid making friend classes.
* QPrefs.[Ch]: removed everything GUI related. The controller does not know anything about what the Dialog is doing, it is here only to transfer request one way or the other.
* QPrefsDialogs.[Ch]: transfered everything GUI related here. Things are gathered per module in contructor, apply() and update() methods so that it will be easy to transfer code to separate class afterward
- QPrefsDialogs::apply(LyXRC & rc): fill in rc parameters from GUI.
- QPrefsDialogs::update(LyXRC const & rc): update GUI from rc parameters.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@13453 a592a061-630c-0410-9148-cb99ea01b6c8
- fix from Edwin Leuven: colorsModule did not recognize colornames grey40, etc.
- delete unused variable.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@13445 a592a061-630c-0410-9148-cb99ea01b6c8
(QWorkArea::QWorkArea): do not set background of the workarea (bug 2197)
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@13433 a592a061-630c-0410-9148-cb99ea01b6c8
* metricsinfo.h
(ViewMetricsInfo): add size parameter
* BufferView_pimpl.C
(BufferView::Pimpl::metrics): return size
* frontends/screen.C
(LyXScreen::redraw): expose selectively, using y1, y2 in vi, and
exposing lower grey at end using size test
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@13432 a592a061-630c-0410-9148-cb99ea01b6c8
When you click the "Alter button" on a added branch in "Document Settings/Branches" Dialog, clicking on the palette on the right to select a color won't work (selected color stays black). After selecting a color from the "Basic Colors" or the "Custon colors"
(which works fine), the color selection from the palette will work correctly. The problems lies in that the QColor() constructor produces an invalid color (RGB 0,0,0). "lightskyblue" is now the default color for a branch when you click the alter button.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@13429 a592a061-630c-0410-9148-cb99ea01b6c8
- Cursor handing is done on the server -> *cursor are
QPixmap
- Use new drawScreen and copyScreen methods.
* QWorkArea.[Ch]:
- Pixel manipulation is done on the client -> paint_device_ is a
QImage
- an intermediate Screen device is updated whenever expose is called
-> sreen_device_ is a QPixmap. This screen_device is the one that is
painted on screen in QWorkArea::repaintEvent().
- new update, drawScreen and copyScreen methods.
* QLPainter.C: use the new paintDevice interface.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@13428 a592a061-630c-0410-9148-cb99ea01b6c8
which hold functionality that has been moved from the frontends
and implement a method to use a default stylefile for new bibtex
insets (bug 2322).
frontends/gtk/GBibtex.C:
frontends/qt2/QBibtex.C:
frontends/qt4/QBibtex.C:
frontends/xforms/FormBibTex.C: Move parsing of Options (stylefile, bibtotoc) to the
controller (bug 2322).
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@13427 a592a061-630c-0410-9148-cb99ea01b6c8
* entries in the combobox in the toolbar are not legible
* same for entries in the listview in the preferences dialog
* the color is not updated after changing it (i always change the murky pink color of lyx's background to white)
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@13387 a592a061-630c-0410-9148-cb99ea01b6c8
The MACX specific menubar hack present in qt2 frontend is still not ported to the qt4 frontend.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@13376 a592a061-630c-0410-9148-cb99ea01b6c8
QWorkArea.h: Added comments
Reverted to Q_WS_X11 and Q_WS_MACX instead of Q_OS_*
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@13371 a592a061-630c-0410-9148-cb99ea01b6c8
* QWorkArea.[Ch] cleanup:
- Added private members workWidth_ and workHeight_ in order to
make sure QWorkArea is always able to draw (link to
workArea::WorkAreaResize).
- deleted superfluous debugging stuff
- deleted superfluous commented out code.
- placed all specific stuff (Qt-immodule, X11 and Mac OSX) in a
separate place at the end of QWorkArea.C.
- initial support for Wheel mouse (still does not work).
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@13348 a592a061-630c-0410-9148-cb99ea01b6c8
