The code does a reload on the buffer to avoid loose pointers if the
file changes directory. This commit adds a bool parameter to
Buffer::reload to allow for keeping the undo stack intact. This is of
couse only wanted in this case, not when reloading an earlier version
of the file.
This commit does a bit more than fix selection, since it saves the full cursor state
in the undo stack. This means that undo now restores:
* the selection
* the current font
* transient mark (shall we keep this one?), logical position...
In order to do that, it introduces an intermediate class between Cursor and DotIterator: CursorData.
The new inheritance diagram is thus
DocIteraator -> CursorData -> Cursor
CursorData contains all the members of Cursor that define the current position, but not the stuff
related to current view of dispatch mechanism. It may make sense in the future to move members
between CursorData and Cursor and to move some member functions to CursorData.
Now UndoElement uses CursorData for cur_before and cur_after, but not for the cell. The undo API uses
also CursorData instead of DocIterator.
The idea is to record undo at the place where the document is modified:
1/ in Buffer::updateBuffer, add a recordUndo, with the caveat that a
const_cast has to be used (because updateBuffer is const but
modifies the document, go figure).
2/ in GuiApplication::dispatch, add an extra undo group that
encompasses the updateBuffer call. Some other undo groups may be
redundant now, but it is not a problem since they do not cost
anything.
In this version, the idea is to record undo at the place where the document is modified, which is definitely cleaner.
1/ in Buffer::updateBuffer, add a recordUndo, with the caveat that a
const_cast has to be used
2/ in GuiApplication::dispatch, add an extra undo group that
encompasses the updateBuffer call. Some other undo groups may be
redundant now, but it is not a problem since they do not cost
anything.
While cppcheck did not turn out any suspicious error messages, using
the "performance" flag highlighted several nitpicks in three categories
* do not use it++ for iterators, ++it is better
* do not use size() to test for emptyness, empty() is here
* do not use "const T" as a function parameter, "const & T" is better
I doubt that any of these is a real performance problem, but the code is cleaner anyway.
In this case, the working dir has already a slash at the end.
Appending another one would result in a path ending with a double slash,
which has a special meaning when used in TEXINPUTS (all subdirs would
be recursively scanned). So, avoid doing that.
If a converter specifies the needaux flag, latex (or xelatex) is
always run to produce the needed auxiliary files. This is wrong
because there are documents that can only be compiled with a specific
backend and thus the conversion may fail. On the other hand, even if
the document specifies the backend to be used, LyX ignores this info.
This commit rectifies this behavior by letting LyX run the same flavor
of the latex backend that shall be used for previewing the document
also for producing the auxiliary files.
Math commands need it as well as text commands. At the same time, this
further unifies the checking for termination and fixes cases of wrong
output (e.g. for 0x2005).
We only copied the error list to the cloned buffer when makeLatexfile
failed. This means that a second try will never clear the error list and
the user will be presented the same list again.
Therefore, we unconditionally copy the error list such that we also clear
the list on success.
then trying to compile.
There are really two problems here. One is that the renamed
buffer needs to be reloaded. All kinds of files, etc, may not
exist any more, if we've been saved to a new directory; our
children e.g. may not be in the right place. And, in this case,
we may no longer be a child of our old parent. Reloading will
fix all of that.
On reload, though, we need to clear our parent, since we may
not have one any more. It will get reset if need be.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@40609 a592a061-630c-0410-9148-cb99ea01b6c8
for this yet, however.
Includes elements of a patch by Rob Oakes.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@40409 a592a061-630c-0410-9148-cb99ea01b6c8
We split Buffer::clone() into various routines that know whether
to clone the children.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@40357 a592a061-630c-0410-9148-cb99ea01b6c8
The global list of cloned buffers was a bad idea. We don't have multiple
export threads, but we can have multiple autosave threads. So now we keep
more than one of these lists at the same time, and each cloned buffer has
a pointer to the relevant list. Note that this would make multiple export
possible, if we wanted to do that at some time.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@40227 a592a061-630c-0410-9148-cb99ea01b6c8
the destructor since we could, in some cases, end up deleting them
multiple times. So we need to keep a list of the Buffers we need to
delete, kind of like the BufferList.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@40205 a592a061-630c-0410-9148-cb99ea01b6c8
- Let all doExport calls honor maintain_unincluded_children
- Also don't let the behaviour depend on supplying the result_file parameter
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@40085 a592a061-630c-0410-9148-cb99ea01b6c8
TODO:
- Also let the public function return an error value,
- Move all user interaction (Alerts etc.) out of Buffer.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@40044 a592a061-630c-0410-9148-cb99ea01b6c8
TODO:
- Also let the public function return an error value,
- Move all user interaction (Alerts etc.) out of Buffer.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@40043 a592a061-630c-0410-9148-cb99ea01b6c8
All calls to doExport from outside of Buffer have the same algorithm to
determine whether the included children parameter should be true. Moreover,
this decision is only based on information from the Buffer itself.
Now, Buffer only has 1 public function doExport and preview.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@40041 a592a061-630c-0410-9148-cb99ea01b6c8
The LyX buffer is cloned before autosaving, but the unnamed_ member was not
copied. This causes the autosave files to end up in the wrong location and
consequently they were never removed afterwards.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@40008 a592a061-630c-0410-9148-cb99ea01b6c8
This restores \input@path handling, which turns out to be necessary, as
the TEXINPUTS mechanism is not used with relative paths. It turns out
that both methods must be used, because \input@path does not work in all
cases (most notably with tikz).
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@39918 a592a061-630c-0410-9148-cb99ea01b6c8
Keeping some debugging output about these filename mangling, in case additional debugging is needed.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@39812 a592a061-630c-0410-9148-cb99ea01b6c8
- \negmedspace and \negthickspace outside of math
- \enspace, \hspace*, \hspace*{\fill} and \hfill inside math
(fileformat change)
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@39557 a592a061-630c-0410-9148-cb99ea01b6c8
When a document is not multi-lingual the text contents is changed
to the new language. This should be recorded for Undo.
Because Undo wants a cursor the implemantation has to be
moved to the BufferView class.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@39508 a592a061-630c-0410-9148-cb99ea01b6c8
The PreviewLoader is created directly by Buffer on demand. The PreviewLoader cache was complex and unneeded because there is one and only one PreviewLoader per Buffer.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@39276 a592a061-630c-0410-9148-cb99ea01b6c8
It's amazing we haven't seen problems with this before. The basic problem is that buf.errorList("whatever") would always return the same global, static error list, if it did not already exist. So, to a significant extent, there was only one global error list!
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@38980 a592a061-630c-0410-9148-cb99ea01b6c8
It's amazing we haven't seen problems with this before. The basic problem is that buf.errorList("whatever") would always return the same global, static error list, if it did not already exist. So, to a significant extent, there was only one global error list!
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@38978 a592a061-630c-0410-9148-cb99ea01b6c8
the same document could not be rendered.
Problem was that we were using children_positions to deal with the
included documents. That structure only includes each child once.
We need to use position_to_children, instead.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@38842 a592a061-630c-0410-9148-cb99ea01b6c8
the macros declared in the parent do not work. This is because we were
cloning only the child, which then didn't have a parent.
The solution is to clone the whole structure, starting with the master
document. As a side effect, we only clone each child once.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@38837 a592a061-630c-0410-9148-cb99ea01b6c8
variable. This is done in the preferences, much like as the PATH prefix.
A single '.' in the paths will get replaced with the current document dir
and also non-absolute paths will be prefixed with that dir.
The default semantics of TEXINPUTS apply, such that, for example, if a
path is terminated with a double slash, all subdirectories will be also
searched by both the TeX engine and ancillary programs such as dvi
previewers or dvips. As an example, if the prefix is set to ".:figs", the
TEXINPUTS variable will be set as ".:<docdir>:<docdir>/figs:$ORIGTEXINPUTS",
where <docdir> is the document directory.
The initial '.' is necessary to address the actual current dir (this will
be the temp dir at preview time), while if TEXINPUTS was initially unset,
such that $ORIGTEXINPUTS is empty, a colon (or semicolon on Windows) will
end the path list. This is very important, because we don't want to replace
the system directories but to complement them and, in order to do that, an
empty element has to be present in the list. Indeed, according to the
TEXINPUTS semantics, an empty element means the standard search path.
This works whether TEXINPUTS is originally set or not, because if the
original TEXINPUTS starts with a colon (meaning that the standard search
path is wanted there) we will have an empty element at that point,
otherwise the final colon will simply serve as a path separator.
Of course, on Windows a ';' has to be used as a path separator. LyX will
take care of transforming the platform path list into one understandable
by the TeX engine. For example, this will be the case for a Cygwin version
of LyX using a native Windows TeX engine or viceversa. I tested all of
this and it works for me.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@38681 a592a061-630c-0410-9148-cb99ea01b6c8
inset to know that the BibTeX data had changed. So we introduce a
Buffer-wide variable that we can query for that information.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@38619 a592a061-630c-0410-9148-cb99ea01b6c8
calls into the file writing routines and out of doExport(). They were in
both places before: Called once in doExport, and then again in the e.g.
writeLaTeXSource()---and then again, actually, in validate().
It is possible this will reveal some missing updateBuffer() calls
somewhere. But it should somewhat speed up View>Source, since we now do
not do an extra set of such calls in that routine. Rather, we rely upon
the Buffer's having been made up to date first, by the updateBuffer()
call after dispatch.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@38596 a592a061-630c-0410-9148-cb99ea01b6c8
http://www.mail-archive.com/lyx-
for the reason it needs to be here.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@38497 a592a061-630c-0410-9148-cb99ea01b6c8
to be a set. Not that speed will really be an issue here, but....
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@38178 a592a061-630c-0410-9148-cb99ea01b6c8
as a whole gets highlighted. Now, the error list carries information
about the starting id/pos and ending pos, but not about the ending id.
So, when computing the range to be highlighted as range = pos_end - pos_start,
if id_start != id_end, the result 1 means one inset and only the first
character in the inset would be highlighted. Thus, when id_start != id_end,
let pos_end = 0, such that the whole content will be highlighted.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@37900 a592a061-630c-0410-9148-cb99ea01b6c8
child, the returned list had no master and twice the child itself).
(was causing misbehavior in Advanced Find & Replace with scope=Document).
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@37852 a592a061-630c-0410-9148-cb99ea01b6c8
at the same line. Given that we know where the error occurred, don't
unnecessarily check the master first.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@37846 a592a061-630c-0410-9148-cb99ea01b6c8
counting when exporting to latex. This is done for the code comprised
between \begin{document} and \end{document}, while the preamble code
still needs manual calls to TexRow::newline() for registering new lines.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@37584 a592a061-630c-0410-9148-cb99ea01b6c8
not release level. File format does not change for a single minor (branch), so
this info has small value.
On the other hand the first line of header is causing unnecessary merge
conflicts for users of LyX VCS.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@37579 a592a061-630c-0410-9148-cb99ea01b6c8
blank lines may be inadvertently output. This is achieved by using two
special iomanip-like variables (breakln and safebreakln) in the lyx::
namespace. When they are inserted in the stream, a newline is output
only if not already at the beginning of a line. The difference between
breakln and safebreakln is that, if needed, the former outputs '\n'
and the latter "%\n".
In future, the new class will also be used for counting the number of
newlines issued. Even if the infractrure for doing that is already in
place, the counting is essentially still done the old way.
There are still places in the code where the functionality of the
class could be used, most probably. ATM, it is used for InsetTabular,
InsetListings, InsetFloat, and InsetText.
The Comment and GreyedOut insets required a special treatment and a
new InsetLayout parameter (Display) has been introduced. The default
for Display is "true", meaning that the corresponding latex
environment is of "display" type, i.e., it stands on its own, whereas
"false" means that the contents appear inline with the text. The
latter is the case for both Comment and GreyedOut insets.
Mostly, the only visible effects on latex exports should be the
disappearing of some redundant % chars and the appearing/disappearing
of null {} latex groups after a comment or lyxgreyedout environments
(they are related to the presence or absence of a space immediately
after those environments), as well as the fact that math environments
are now started on their own lines.
As a last thing, only the latex code between \begin{document} and
\end{document} goes through the new class, the preamble being directly
output through odocstream, as usual.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@37360 a592a061-630c-0410-9148-cb99ea01b6c8
At the end escape for fsync would be the least hackish solution
but it needs somebody with ext4 to test with.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@37348 a592a061-630c-0410-9148-cb99ea01b6c8
and the converters is also used by the main thread (getStatus).
LyX.exe!lyx::Buffer::doExport
LyX.exe!lyx::Buffer::preview(
LyX.exe!std::tr1::_Pmf_caller3<
LyX.exe!std::tr1::_Pmf_caller3<
LyX.exe!std::tr1::_Callable_pmf<
LyX.exe!std::tr1::_Bind3<
LyX.exe!std::tr1::_Bind_base<
LyX.exe!lyx::frontend::GuiView::GuiViewPrivate::runAndDestroy<
LyX.exe!lyx::frontend::GuiView::GuiViewPrivate::previewAndDestroy(
LyX.exe!QtConcurrent::StoredFunctorCall3<
LyX.exe!QtConcurrent::RunFunctionTask(
QtCored4.dll!QThreadPoolThread::run(
QtCored4.dll!QThreadPrivate::start(
msvcr100d.dll!_callthreadstartex()
msvcr100d.dll!_threadstartex(void * ptd)
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@37292 a592a061-630c-0410-9148-cb99ea01b6c8
Using updateMacros() entails a performance hit when loading a document
with really a lot of macros. So, revert to the original strategy of
tracking macros at creation time. In order to also account for macros
defined in a child document, the child is now loaded by the include inset
at construction time instead of after the master has finished loading.
This strategy mimics what updateMacros() was accomplishing without
incurring in its drawbacks, such that loading time is practically
unchanged even with a thousand macros.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@36968 a592a061-630c-0410-9148-cb99ea01b6c8
updateBuffer() traversal. The reason is simple: InsetCitation needs
access to the BibTeX info to calculate its label. But we won't have it
until we get to the bibliography.
I don't think there is any way around that.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@36710 a592a061-630c-0410-9148-cb99ea01b6c8
to be passing the BiblioInfo structure around this way. (That's an old
holdover.) That lets us get rid of the non-const masterBibInfo() again.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@36697 a592a061-630c-0410-9148-cb99ea01b6c8
bibliography information in updateBuffer(), rather than doing a wholly
separate traversal. We still do a separate traversal in two cases, as a
full updateBuffer() call just isn't needed there.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@36696 a592a061-630c-0410-9148-cb99ea01b6c8
- With XeTeX/LuaTeX and tex fonts, we need to force the encoding to utf8-plain manually.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@36558 a592a061-630c-0410-9148-cb99ea01b6c8
Change its parameter type to support::FileName for convenience.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@36375 a592a061-630c-0410-9148-cb99ea01b6c8
In particular, it makes paragraph breaks generate single \n in latex output
when ParbreakIsNewline is true
This means that it is not necessary anymore to use newlines to break lines.
Plain paragraph breaks can be used instead, like is done now in ERT/Listings.
This is mainly aimed at sweave support.
lyx2lyx support courtesy of Richard Heck
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@36163 a592a061-630c-0410-9148-cb99ea01b6c8
Computes a hash value for the authors when using change tracking.
Text.cpp, BufferParams.h, Author.h:
Change unsigned int to int because the hash values can be negative.
lyx2lyx:
Allow to convert negative author_ids.
See also: r30756.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@36134 a592a061-630c-0410-9148-cb99ea01b6c8
Also move the saveCheckSum declaration to the section of functions involving reading/writing. And note that it should be made private.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@35925 a592a061-630c-0410-9148-cb99ea01b6c8
argument from that function. We are always saving the checksum for the
Buffer's file. The argument is a left-over from a time when we did the
wrong thing and saved it for e.g. the emergency file.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@35890 a592a061-630c-0410-9148-cb99ea01b6c8
A dynamic_cast is necessary when:
- the object to be casted is from an external library because we can't add Qxxx::asXxxx() to Qt e.g.:
* QAbstractListModel to GuiIdListModel,
* QValidator to PathValidator,
* QWidget to TabWorkArea,
* QWidget to GuiWorkArea;
- the object is to be casted from an interface to the implementing class, because the Interface does not know by whom it is implemented:
* ProgressInterface to GuiProgress,
* Application to GuiApplication.
A dynamic_cast can be replaced by:
- already existing as***Inset() functions, e.g.:
* asHullInset(),
* asInsetMath()->asMacro(),
* asInsetText();
- a static_cast when we are sure this can't go wrong, e.g.:
* we are sure that CellData::inset->clone() is an InsetTableCell,
* in cases where we explicitly check it->lyxCode().
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@35855 a592a061-630c-0410-9148-cb99ea01b6c8
- rename readFromVC to extractFromVC because this function actually doesn't read anything as compared to readEmergency, readAutosave and so on.
- rename readEmergency and readAutosave to loadEmergency and loadAutosave just like loadLyXFile and loadThisLyXFile. Only in loadThisLyXFile we switch to the actually reading of a file.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@35854 a592a061-630c-0410-9148-cb99ea01b6c8
It's strange to have a public interface which has a function loadLyXFile and a function readFile. A user of this class will be confused about the difference.
Therefore, loadThisLyXFile will be next to loadLyXFile to stress that loadThisLyXFile will not load another file ;). I don't know whether all of you like that this function just calls readFile, but it feels good this way. All public paths for loading a file will now go through loadThisLyXFile (i.e. the paths that come from loadLyXFile), while readFile is a pure private function. If this doesn't make sense, just shout.
I think this improves the readability of the class.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@35852 a592a061-630c-0410-9148-cb99ea01b6c8
The only substantive change here is moving the markDirty() call into the
first case. If we don't load the file successfully, then there is no
need to mark dirty.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@35834 a592a061-630c-0410-9148-cb99ea01b6c8
Extract convertLyXFormat function that runs LyX2LyX.
(and some compile fixes)
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@35831 a592a061-630c-0410-9148-cb99ea01b6c8
We need to save the checksum of the requested file. Not of the autosave file.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@35830 a592a061-630c-0410-9148-cb99ea01b6c8
- Move the saveCheckSum to both autosave file as emergency file read function.
- Extract the function parseLyxFormat.
- Improve comment about the older LyX format numbers.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@35829 a592a061-630c-0410-9148-cb99ea01b6c8
- Move some lines of code to more proper places.
- Let Buffer::readFile(FileName const &) return ReadStatus as well.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@35827 a592a061-630c-0410-9148-cb99ea01b6c8
- make a new function readFromVC(),
if the file does not exist, try to extract it from the version control (RCS),
- make a new function readEmergency(),
try to read the emergency file that is associated to the file we are trying to read,
- make a new function readAutosave(),
try to read the autosave file that is associated to the file we are trying to read,
- merge loadLyXFile() and readFileHelper(),
this new function now determines which file to read.
- add more ReadStatus elements to describe failures.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@35819 a592a061-630c-0410-9148-cb99ea01b6c8
exportAndDestroy was calling:
buffer->doExport(format, true, update_unincluded);
where "true" means: Leave it in the tempdir. We need false, which means
we need another parameter, if we're not doing it as cut and paste.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@35715 a592a061-630c-0410-9148-cb99ea01b6c8
for formatted references. Fixes#2295, in so far as it makes it possible
to translate formatted references.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@35623 a592a061-630c-0410-9148-cb99ea01b6c8
We should probably be checking for recursive includes here, and we want
to do that in one place.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@35537 a592a061-630c-0410-9148-cb99ea01b6c8
allRelatives() "stable", in the sense that what it returns does not
depend upon which Buffer we start with.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@35530 a592a061-630c-0410-9148-cb99ea01b6c8
it->fillWithBibKeys(d->bibinfo_, it);
This could be useful later, if we decide to try to do the work that
fillWithBibKeys did from updateLabels().
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@35106 a592a061-630c-0410-9148-cb99ea01b6c8
* src/LyXAction.cpp: add ReadOnly flag to LFUN_UNDO and LFUN_REDO, since
we do not want the dispatch mechanism to mark buffer dirty after them.
* src/BufferView.cpp: handle "by hand" the activation of undo/redo
* src/Undo.cpp: add lyx_clean member to UndoElement and make sure to
maintain it with undo operations; add a new markDirty() member for UndoStack
* src/Buffer.cpp: when saving a document, mark the undo and redo stacks
elements as dirty.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@35068 a592a061-630c-0410-9148-cb99ea01b6c8
Buffer whether we are exporting or not, rather than rely upon isClone(),
which could be adapted to other purposes. And, of course, someone might
choose locally to disable cloning....
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@34999 a592a061-630c-0410-9148-cb99ea01b6c8
allow this as a fallback. E.g., if we're unable to export as MathML,
then we try to export as an image.
There are several ways, I am sure, in which this implementation is not
ideal.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@34993 a592a061-630c-0410-9148-cb99ea01b6c8
DispatchResult to store a flag that tells us whether we need a buffer
update or not.
So: If you find a missing one, go to an appropriate place in the
dispatch and call cur.forceBufferUpdate() or, if you don't have a cursor
but do have a DispatchResult, call dr.forceBufferUpdate().
There is one remaining call I could not move, in
TextMetrics::redoParagraph. But this looks like an emergency call when
the macro context has not been set. There are also a couple calls that
are connected with buffer creation that I commented out, since the same
call is done again almost immediately. But I'm not positive about those.
Now the nice thing would be to do the same for updateMacros().
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@34826 a592a061-630c-0410-9148-cb99ea01b6c8
format bump so we can convert old Beamer files, which are otherwise
broken by the new layout.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@34615 a592a061-630c-0410-9148-cb99ea01b6c8
Solution: don't use boost::shared_ptr for msvc10 (could also be extended to several GCC versions)
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@34259 a592a061-630c-0410-9148-cb99ea01b6c8
Solution: don't use boost::bind for msvc10 (could also be extended to several GCC versions)
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@34257 a592a061-630c-0410-9148-cb99ea01b6c8
Using "-f all", or simply "-f", all files are silently overwritten.
Using "-f main", only the main file is overwritten.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@34224 a592a061-630c-0410-9148-cb99ea01b6c8
- new buffer parameter \boxbgcolor
(I'm still working on the remaining issue #6626 as this affect not only this feature.)
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@34083 a592a061-630c-0410-9148-cb99ea01b6c8
(The default color is still internally white because we have to set a color but the color is only used when the user explicitly specified it.)
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@34058 a592a061-630c-0410-9148-cb99ea01b6c8
- new buffer parameter \fontcolor
- the default color is internally black because we have to set a color
- the font color is only used when the user explicitly specified a color
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@34042 a592a061-630c-0410-9148-cb99ea01b6c8
I'm not happy about having what is basically the same enum in
BufferParams.h and OutputParams.h, but I don't see how to unify them
without either (a) including BufferParams.h in OutputParams.h, which is
ugly or (b) creating some new file just containing this enum, which
seems like overkill. Any other ideas?
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@33967 a592a061-630c-0410-9148-cb99ea01b6c8
- support to change the greyed-out note font color (fixes#3865)
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@33962 a592a061-630c-0410-9148-cb99ea01b6c8
I think it will be worth implementing a version of pure HTML output, for
some uses, a la eLyXer.
Note that at present none of this does anything, and there is no UI to
set it. I just want to make sure it's in the file format, in case I do
not get to this before 2.0.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@33794 a592a061-630c-0410-9148-cb99ea01b6c8
Do not warn that a label already exists if it is in a deleted part of the document.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@33714 a592a061-630c-0410-9148-cb99ea01b6c8
the included insets and make sure that the files they reference are
still where they are supposed to be.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@33686 a592a061-630c-0410-9148-cb99ea01b6c8
- Issue a warning if a path contains uncodable characters (bug 6301).
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@33514 a592a061-630c-0410-9148-cb99ea01b6c8
- fileformat change (lyx2lyx code follows the next days)
- the patch is a joint work of Edwin and me
The patch is huge but the major parts work already. I put it in now as the minor known issues can be solved step by step the next days. I think this is the best solution because collaborating with such large patches already lead to copy/paste bugs.
The known issues are listed here:
http://wiki.lyx.org/Devel/Multirow
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@33414 a592a061-630c-0410-9148-cb99ea01b6c8
a lot of simplification is possible. Except some instability period...
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@33389 a592a061-630c-0410-9148-cb99ea01b6c8
Wrong line count with parent math macros:
* TeXRow.{cpp,h}:
- new helper function to insert multiple newline at once.
* mathed/MacroTable.{cpp,h}:
* mathed/MacroTemplate.{cpp,h}:
- make write() an int, returning number of newlines
* Buffer.cpp (writeLaTeXSource):
- update texrow's newline on parent macro output.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@33367 a592a061-630c-0410-9148-cb99ea01b6c8
probably go also as we agreed that if we need signal/slot in src/ we'll
directly use Qt's.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@33224 a592a061-630c-0410-9148-cb99ea01b6c8
The idea here is to implement something like \refstepcounter for LyX. We
do this by tracking the "active" counter in Counters.cpp. We also have
to track when we go in and out of environments to which counters are
local, and so on and so forth.
This all gets done in updateLabels(), but only if we are producing
output, which is why I added the output boolean a while ago.
I expect there are bugs in here, though it seems to work pretty well
with the documents I've tested.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@33108 a592a061-630c-0410-9148-cb99ea01b6c8
cloned Buffer is always "unloaded" as far as the BufferList is
concerned.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@33105 a592a061-630c-0410-9148-cb99ea01b6c8
(i) release the macro lock after we've cloned, so that...
(ii) we can regenerate the macro caches before doing XHTML output.
It may be worth doing the regeneration in the clone() routine itself,
but it appears that the export routines now all do it anyway.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@32983 a592a061-630c-0410-9148-cb99ea01b6c8
prevents weirdness that might happen if the .bib file were to change
during updateLabels(), (b) prevents even further weirdness that might
happen if it changed during the output routines, and (c) ought to avoid
slowness caused by the repeated calls to QFileInfo::refresh() needed to
check the cache status.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@32972 a592a061-630c-0410-9148-cb99ea01b6c8
page numbering and the references of the master file are maintained in the included children (bug 1005).
I made this optional since some people use \includeonly to save compilation time, but a proper aux file update
needs a full compilation of the complete master prior to the compilation of the \includeonly master.
Hence, a new buffer param is introduced (file format change).
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@32936 a592a061-630c-0410-9148-cb99ea01b6c8
Furthermore, make sure that the read-only flag is always set to both true and false, since now the buffer can be read-only during a reload.
Last, set the buffer clean after a successful reload.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@32896 a592a061-630c-0410-9148-cb99ea01b6c8
