for possible thread conflicts, of the sort Georg resolved at
6a30211f. I have made static variables const where possible,
and marked cases that looked potentially problematic with the
comment:
// FIXME THREAD
Many of these definitely are vulnerable to concurrent access, such
as the static variables declared at the start of output_latex.cpp.
Suppose, e.g., we were outputting latex and also displaying the
source of a different document.
I'd appreciate it if others could grep for "FIXME THREAD" and see
if some of these are harmless, or what.
* disable branch-add-insert in pass thru paragraphs
* when it is not possible to input a quote inset, insert a single
ascii quote when argument to quote-insert is "single"
* handle "mathspace" dialog in Text::getStatus
* disable insertion of newline inset in pass thru paragraphs
* handle "mathdelimiter" and "mathmatrix" dialogs in GuiView::getStatus.
Move the handling of branch-(de)activate(master) to Buffer. This code was moved to Bufferview in [3a03e71c/lyxgit] because a cursor was necessary to call Undo::recordUndoFullDocument(). However, it turns out that the undo code is already prepared to handle an empty cursor (and do nothing in this case).
Therefore we do that and move the branch code to Buffer where it belongs.
Note that there was a bug in the previous code that broke undo support: recordUndo should always be called _before_ doing any change.
each failure.
There are several places I was not sure what to do. These are marked
by comments beginning "LASSERT:" so they can be found easily. At the
moment, they are at:
Author.cpp:105: // LASSERT: What should we do here?
Author.cpp:121: // LASSERT: What should we do here?
Buffer.cpp:4525: // LASSERT: Is it safe to continue here, or should we just return?
Cursor.cpp:345: // LASSERT: Is it safe to continue here, or should we return?
Cursor.cpp:403: // LASSERT: Is it safe to continue here, or should we return?
Cursor.cpp:1143: // LASSERT: There have been several bugs around this code, that seem
CursorSlice.cpp:83: // LASSERT: This should only ever be called from an InsetMath.
CursorSlice.cpp:92: // LASSERT: This should only ever be called from an InsetMath.
LayoutFile.cpp:303: // LASSERT: Why would this fail?
Text.cpp:995: // LASSERT: Is it safe to continue here?
When using 'find' and a string is not found, this is not an error or a
surprising event. It is often expected (e.g. after searching through
the whole document for a certain string eventually you will get this
message). The exclamation mark should be reserved for messages that
are unexpected or that need extra attention, such as errors.
http://marc.info/?l=lyx-devel&m=133876924408431&w=2
The problem here is that the copy_params() routine in FindAndReplace.cpp
created a new DocumentClass, but it never updated its Buffer to reflect
that new DocumentClass. So its Paragraphs still contained points to the
Layouts in the old DocumentClass which, since ead697d4b6, gets garbage
collected once it is no longer needed. So the Layout doesn't exist, and
we crash.
objects. The problem that led to the leak is that these objects can be held in
memory long after the Buffer that created them is gone, mostly due to their
use in the CutStack. So they were previously held in a storage facility, the
DocumentClassBundle. Unfortunately, they were now being created too often,
especially by cloning. It's not really a leak, because they're accessible, but
we weren't ever destroying them.
This new approach uses a shared_ptr instead.
Thanks to Vincent for pointing out const_pointer_cast.
This reverts the previous fix in [0a33374c/lyxgit] and fixes it
differently.
We always have to call 'notifyCursorLeaves', but we only have to make sure
that we call the 'fixIfBroken()' functions first.
We rely on the 'or' operator to prevent us from calling
'notifyCursorLeaves' if one of the two cursors is broken. This doesn't
work when using the '|' operator. The compiler 'optimizes' the code in
such a way that we always call notifyCursorLeaves anyway. Using the '||'
operator fixes this.
LFUN_INSERT_PLAINTEXT is handled in GuiView because it might need to ask for a filename. But if the filename is given as a paramater we can handle it in BufferView immediately. Also, when we've asked for the filename in GuiView we should dispatch the LFUN to BufferView in order to properly use the Undo mechanism.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@40377 a592a061-630c-0410-9148-cb99ea01b6c8
The trick is to rely on Cursor::selHandle instead of fiddling with the selection
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@40372 a592a061-630c-0410-9148-cb99ea01b6c8
we will be cautious, of course). The problem was that we were issuing
the Buffer::changed() signal before we did updateBuffer(), and this
caused an inconsistency. The idea here is to defer issuing this signal
until we call processUpdateFlags(). We know we need a redraw if we've
deleted a whole paragraph.
This should work properly, so long as checkDepm is called from within
the dispatch mechanism. There may, however, be other paths, and I've
noted one explicitly with a FIXME in Text2.cpp. I've tested a few
different variations, however, and I haven't seen any problems. But if
we do run into problems, we can go ahead and do the update there that we
were previously doing in checkDepm itself.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@40352 a592a061-630c-0410-9148-cb99ea01b6c8
- Interpret argument of LFUN_SPACE_INSERT correctly
- Use InsetMathSpace instead of InsetMathSpecialChar for "\ " (bug # 7728)
- Use InsetMathSpace instead of InsetMathChar for ~ (bug # 7728).
This fixes also the display in LyX (previously a literal ~ was displayed).
Using InsetMathSpace enables also the "Insert Formatting" menu entries.
No file format change is needed, since the LaTeX export is unchanged.
Note that there are still some bugs related to spaces in math:
#7746, #7747, #7749, #7842
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@39947 a592a061-630c-0410-9148-cb99ea01b6c8
text which is not explicitly marked in a different language, irrespective
of the multilingual status, except for LTR<=>RTL changes.
See discussion in this thread:
http://thread.gmane.org/gmane.editors.lyx.devel/138380
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@39702 a592a061-630c-0410-9148-cb99ea01b6c8
The patch fixes a case that I had forgotten. Namely, the case that when the height of a row was larger than the height of the screen and that the cursor is already visible. That's why I added a new if case to catch all situations in which the row height is larger than the height of the screen. If we then need scrolling we scroll to height/4 and 3*height/4. In the end, the height_/4 and 3*height_/4 should be replaced by the rowheights in the inset, but we need some extra infrastructure for that.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@39697 a592a061-630c-0410-9148-cb99ea01b6c8
When a document is not multi-lingual the text contents is changed
to the new language. This should be recorded for Undo.
Because Undo wants a cursor the implemantation has to be
moved to the BufferView class.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@39508 a592a061-630c-0410-9148-cb99ea01b6c8
- After introducing the displayed vertical alignment for tables, we met for the first time situations in which row.ascent is very large. To make sure the scrolling still works, we have to do the same as we did for rows with a large descent.
- change row.ascent into defaultRowHeight. Before the above mentioned change, row.ascent usually was approximately the same as defaultRowHeight (by chance). However, it is now clear we don't really want row.ascent here.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@39486 a592a061-630c-0410-9148-cb99ea01b6c8
The PreviewLoader is created directly by Buffer on demand. The PreviewLoader cache was complex and unneeded because there is one and only one PreviewLoader per Buffer.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@39276 a592a061-630c-0410-9148-cb99ea01b6c8
viewer to give us sensible information, but that information may be out-
generated. So we need to check and make sure the values we get are
valid.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@38859 a592a061-630c-0410-9148-cb99ea01b6c8
We are missing the updateBuffer() call when we go through
mouseEventDispatch(). A consequence of the massive updateBuffer()
refactoring. Wish it had been caught before...
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@38667 a592a061-630c-0410-9148-cb99ea01b6c8
The one remaining question is whether we should also call resetAnchor()
at the end of setCursor().
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@38388 a592a061-630c-0410-9148-cb99ea01b6c8
preparatory to fixing #7080. Note that mathed uses the same routine, but
for a completely different purpose, so I did not rename it there. I have
seen no difference in behavior after testing, e.g., opening and
exporting Math.lyx, and also re-saving it and looking at the diff.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@38109 a592a061-630c-0410-9148-cb99ea01b6c8
The execution order bv -> doc_bv -> buffer -> doc_buffer was artificial and not important AFAIU.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@36734 a592a061-630c-0410-9148-cb99ea01b6c8
Restore the wrap-around question when no more hits found while searching with Advanced Search.
The dispatched() flag is used currently in FindAndReplace.cpp in order to discriminate between
match found and not found and, in the latter case, pop-up the wrap-around question dialog.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@36279 a592a061-630c-0410-9148-cb99ea01b6c8
The dispatched() flag is used currently in FindAndReplace.cpp in order to discriminate between
match found and not found and, in the latter case, pop-up the wrap-around question dialog.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@36277 a592a061-630c-0410-9148-cb99ea01b6c8
Buffer::errors("Parse") is called 7 times in the whole project. 4 times from GuiView and three times from functions in other classes, but which are (almost) only called from the GuiView.
Buffer::errors is used to signal the GUI that there might be an error occuring, but what sense does it make if it is only called from the Gui ?
Isn't it better to let the function return wether it succeeded or not and let the GuiView take action in doing something with the possible errors.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@35911 a592a061-630c-0410-9148-cb99ea01b6c8
An example of a fatal function call is "gotoInset(this, NOTE_CODE, true)". Luckily we don't check for the contents in LFUN_NOTE_NEXT.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@35860 a592a061-630c-0410-9148-cb99ea01b6c8
avoids multiple screen redraws in some cases.
If someone knows how to fix the FIXMEs in GuiErrorList and
GuiSpellcheker, I'd really appreciate it.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@35651 a592a061-630c-0410-9148-cb99ea01b6c8
be telling us. I'm not sure why this wasn't being used any more.
If we find any missing updates, it may be because the inset dispatch
stuff wasn't doing its job.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@35634 a592a061-630c-0410-9148-cb99ea01b6c8
* src/LyXAction.cpp: add ReadOnly flag to LFUN_UNDO and LFUN_REDO, since
we do not want the dispatch mechanism to mark buffer dirty after them.
* src/BufferView.cpp: handle "by hand" the activation of undo/redo
* src/Undo.cpp: add lyx_clean member to UndoElement and make sure to
maintain it with undo operations; add a new markDirty() member for UndoStack
* src/Buffer.cpp: when saving a document, mark the undo and redo stacks
elements as dirty.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@35068 a592a061-630c-0410-9148-cb99ea01b6c8
reported by the caller. Otherwise, you could get the error message the
first time, and then it would succeed the second!!
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@35019 a592a061-630c-0410-9148-cb99ea01b6c8
DispatchResult to store a flag that tells us whether we need a buffer
update or not.
So: If you find a missing one, go to an appropriate place in the
dispatch and call cur.forceBufferUpdate() or, if you don't have a cursor
but do have a DispatchResult, call dr.forceBufferUpdate().
There is one remaining call I could not move, in
TextMetrics::redoParagraph. But this looks like an emergency call when
the macro context has not been set. There are also a couple calls that
are connected with buffer creation that I commented out, since the same
call is done again almost immediately. But I'm not positive about those.
Now the nice thing would be to do the same for updateMacros().
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@34826 a592a061-630c-0410-9148-cb99ea01b6c8
Clear the mouse_hover state when closing the BufferView. Otherwise, there will be an invalid pointer stored in the Inset and crashing LyX when the Inset's destructor is called.
See also r33908, r34117, r34348, r34353, r34354, r34363 and bug #3900.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@34365 a592a061-630c-0410-9148-cb99ea01b6c8
Now, we only want to let the last_inset_ pointer point at insets that accept the mouse_hover setting. Otherwise, the pointer is not cleared on deletion of the inset.
See also r33908, r34117, r34348, r34353 and bug #3900.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@34354 a592a061-630c-0410-9148-cb99ea01b6c8
This is also in preparation of a decent fix for bug #3900.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@34347 a592a061-630c-0410-9148-cb99ea01b6c8
Fix the regression introduced in r28397 while fixing bug #5573.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@34296 a592a061-630c-0410-9148-cb99ea01b6c8
We need a way to test for the pointer to be valid before using it in updateHoveredInset(). For now, just set it to zero, so that this critical won't find its way into alpha-2.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@34117 a592a061-630c-0410-9148-cb99ea01b6c8
Change inset-forall so that screen is not repainted at each iteration, since this lead to very slow opeartion on large files. This is not a problem for current uses, but can potentially lead to crashes.
See ticket #6641 for more thoughts and possible solutions.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@34092 a592a061-630c-0410-9148-cb99ea01b6c8
When updating the screen, moving the mouse, or scrolling the buffer, we check whether the hovering status of the insets.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@33908 a592a061-630c-0410-9148-cb99ea01b6c8
a lot of simplification is possible. Except some instability period...
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@33389 a592a061-630c-0410-9148-cb99ea01b6c8
Split LyXFunc::dispatch into a wrapper that does the actual screen updates and
a worker method that updates a DispatchResult object.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@33226 a592a061-630c-0410-9148-cb99ea01b6c8
- Fix crash when performing word-replace while the cursor has a selection
in mathed (bug 6437)
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@33204 a592a061-630c-0410-9148-cb99ea01b6c8
current buffer and applies a given function at cursor position before the
inset. It is actually possible to filter on the type of inset.
Remove all index insets:
inset-forall Index delete-char-forward
Remove all (!!) insets:
inset-forall * delete-char-forward
Close all Notes (also works for a particular branch, for example)
inset-forall Note inset-toggle close
Close only yellow sticky notes
inset-forall Note:Note inset-toggle close
Of course, things may become weird:
Put LyX in an infinite loop if there is at least a Note
inset-forall Note char-backward
In this case, the code will stop after 1000 iterations.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@32834 a592a061-630c-0410-9148-cb99ea01b6c8
- scopes now handled in FindAndReplaceWidget, while lyxfind.cpp only searches within single buffer
- cursor().result().dispatched() now encodes whether a match was found or not, after LFUN_WORD_FINDADV dispatch
- removed a few unneeded functions
- followed a few cosmetic advices
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@32760 a592a061-630c-0410-9148-cb99ea01b6c8
Move the AtPoint handling into the Cursor dispatch machinery
Note that the call to Cursor::getStatus is in BufferView::getStatus, while
the call to Cursor::dispatch is still in LyXFunc::dispatch. This needs to be
fixed, but the code there is a bit fragile.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@31969 a592a061-630c-0410-9148-cb99ea01b6c8
The solution is just to remove special code :)
I think there is a ticket for this, but I cannot find it.
Abdel, could you please validate my thinking?
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@31869 a592a061-630c-0410-9148-cb99ea01b6c8
