Known problems:
- No space is output after a \hfill. I probably broke this with the
InsetCommand patch. I'll have a look later.
- Although the encoding is now UTF8 the arguments of the inputenc package
are still the old ones, so LaTeX will not run.
- Labels and references with non-ASCII characters are broken. This needs to
be fixed in lyx::support::escape(), but this is a file format change.
- Something seems to be wrong with index entries, but this is probably also
due to the InsetCommand changes.
Have fun!
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15378 a592a061-630c-0410-9148-cb99ea01b6c8
* src/insets/insetcommandparams.[Ch]:
(operator[]): New, access a parameter
(clear): New, clear all parameters
(info_): New, stire info about this command
(cmdname): Rename to name_
(contents, options, sec_options): Replace with params_. Parameters
are now stored as docstring.
(findInfo): New factor for command info for all commands
(read, write): Use new syntax
(parameter set and get methods): reimplemenmt for new parameter storage
* src/insets/insetcommand.h
(getParam): New, get a parameter
(setParam): New, set a parameter
(parameter set and get methods): Adjust to InsetCommandParams changes
* src/insets/insetbibitem.[Ch]
(write): Remove, not needed anymore
(directWrite): ditto
* src/insets/insetbibitem.C
(InsetBibitem::read): Use InsetCommand::read
* src/insets/insetref.C
(InsetRef::latex): Use new InsetCommandParams interface
* src/mathed/InsetMathHull.C
(InsetMathHull::doDispatch): ditto
* src/text3.C
(LyXText::dispatch): ditto
* src/factory.C
(createInset): Create InsetCommandParams with command name
(readInset): ditto
(readInset): Remove error message for bibitem, since bibitem is
now a normal command inset
* src/buffer.C: Bump file format number
* src/frontends/controllers/ControlCommand.[Ch]
(ControlCommand): take an additional command name parameter
* src/text.C
(readParToken): Remove code for \bibitem
* lib/lyx2lyx/LyX.py: Bump latest file format number
* lib/lyx2lyx/lyx_1_5.py
(convert_bibitem, convert_commandparams): new, convert to new format
(revert_commandparams): new, convert to old format
* development/FORMAT: document new format
* many other files: Adjust to the changes above
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15357 a592a061-630c-0410-9148-cb99ea01b6c8
CoordCache & coord_cache = sl.text()->bv()->coordCache();
As you can see, I used this indirection to access the BufferView::CoordCache(). Bad luck, the passed CursorSlice was not completely valid inside a mathed inset, hence the crash. My solution is to pass BufferView to InsetBase::cursorPos() and all its derivative.
* InsetBase::cursorPos(): pass BufferView const &
* bufferview_funcs::coordOffset(): ditto.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15356 a592a061-630c-0410-9148-cb99ea01b6c8
The coordcahce is for up/down navigation and vconverting mouseclicks to text positions. It is not for pure display/export which
is what drawT is about. It was a simple oversight not to remove it after some copying from the 'real' draw() method.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15347 a592a061-630c-0410-9148-cb99ea01b6c8
* lyx_main.h: define "extern bool lyx::use_gui" here.
* NoGuiFontMetrics.h: new class for command-line LyX
* NoGuiFontLoader.h: new class for command-line LyX
* Application.C:
- theFontMetrics(): returns the above dummy FontMetrics when use_gui is false.
- theFontLoader(): returns the above dummy FontLoader when use_gui is false.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15339 a592a061-630c-0410-9148-cb99ea01b6c8
* MathFactory.C:
- initMath(): revert change from r15327 because initSymbols() is needed for proper math parsing.
- math_font_available(): return false if lyx::use_gui is false.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15331 a592a061-630c-0410-9148-cb99ea01b6c8
* lyx_main.C:
- parse_export(): set lyx::use_gui to false.
* MathFactory.C:
- initMath(): initSymbols() only if lyx::use_gui is true.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15327 a592a061-630c-0410-9148-cb99ea01b6c8
theCoords is now a thing of the past and all CoordCache accesses are done via BufferView::coordCache() now. I had to modify a number of methods to pass BufferView.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15324 a592a061-630c-0410-9148-cb99ea01b6c8
export (e.g. the ToC) and the navigate menu.
* src/insets/insetbase.h
(InsetBase::plaintext): output to a docstream
(InsetBase::textString): ditto
* src/mathed/TextPainter.h
(TextPainter::show): ditto
* src/support/docstream.[Ch] New file and string streams for
docstring. The file streams convert to UTF8 on the fly.
* many more files: Adjust to the changes above
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15301 a592a061-630c-0410-9148-cb99ea01b6c8
* lyxfunc.h:
- theLyXFunc(): new function in the global namespace.
- lyx::dispatch(): new function in the lyx namespace.
- lyx::getStatus(): new function in the lyx namespace.
* bufferlist.h:
- theBufferList(): new function in the global namespace.
* Clipboard.h:
- theClipboard(): new function in the global namespace.
* Selection.h:
- theSelection(): new function in the global namespace.
* FontLoader.h:
- theFontLoader(): new function in the global namespace.
* FontMetrics.h:
- theFontMetrics(LyXFont const &): new function in the global namespace.
* Application.C: implements the functions defined above.
* LyXView.h:
- getLyXFunc(): deleted.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15298 a592a061-630c-0410-9148-cb99ea01b6c8
* buffer.[Ch] (changeRefsIfUnique): extend to handle bibitems
as well (the function takes a InsetCode argument now);
clean up by using InsetIterator.
* InsetMathHull.C (doDispatch): changeRefsIfUnique needs a
InsetCode argument now (bug 2744).
* insetlabel (doDispatch): changeRefsIfUnique needs a
InsetCode argument now.
* insetbibitem (doDispatch): use changeRefsIfUnique
(actual fix for bug 2744).
* insetcommand.[Ch]:
* insetcite.[Ch]: implement replaceContents, which is
used by changeRefsIfUnique.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15289 a592a061-630c-0410-9148-cb99ea01b6c8
Basically, I replaced all methods in the font_metrics namespace by a proper virtual interface FontMetrics. The FontLoader is _the_ container for FontMetrics.
This patch should also bring some optimizations in a number of place in the code. This is because we do not need any more to search for the LyXFont at each font_metrics call. In effect, the speed advantage is not as sensible and this is a bit deceiving considering that this was my primary motivation behind the patch. But I like the patch anyway as it cleans up the relation and interfacing between fonts, metrics and frontends.
* frontends/FontMetrics.h: new virtual interface. Renamed from font_metrics.h
* qt4/GuiFontMetrics: corresponding qt4 implememtation. Renamed from qfont_metrics.C. The smallCaps particular case treatment has been transfered here as well as the width cache for MacOSX and Windows.
* qt4/QLPainter.C: the smallCapsText has been reworked to return the width of the drawn text.C
all other files: replace font_metric helper function call with corresponding FontMetrics method calls.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15265 a592a061-630c-0410-9148-cb99ea01b6c8
* src/mathed/InsetMathSplit.C
(InsetMathSplit::validate): Only require amsmath for AMS stuff
* src/mathed/MathFactory.C
(createInsetMath): create InsetMathSplit if the latexkey is "split"
* src/mathed/MathParser.C
(Parser::parse1): remove "gathered" and "aligned", since these are
now handled via lib/symbols
(Parser::parse1): create InsetMathSplit if the latexkey is "split"
* lib/symbols: Add aligned, gathered, lgathered and rgathered
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15224 a592a061-630c-0410-9148-cb99ea01b6c8
* frontends/FontLoader.h: new interface class.
* frontends/Application.h: new FontLoader() pure virtual method
* frontends/lyx_gui: update_fonts() and font_available() methods deleted
* [qt3/qt4/gtk]/GuiApplication: implement the new interface
* qt4/GuiFontLoader:
- renamed from FontLoader
- now derives from FontLoader
- now in the lyx::frontend namespace
* qt3/qfont_loader
- now derives from FontLoader
* gtk/xftFontLoader
- now derives from FontLoader
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15220 a592a061-630c-0410-9148-cb99ea01b6c8
Now we write again \begin{align} instead of \begin{4} to .lyx and .tex.
* src/mathed/InsetMathHull.C
(InsetMathHull::header_write): write type name, not type_.
Use switch instead of if for better readability.
(InsetMathHull::footer_write): ditto
(InsetMathHull::mutate): write type name, not type_
(InsetMathHull::normalize): ditto
(InsetMathHull::infoize): ditto
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15204 a592a061-630c-0410-9148-cb99ea01b6c8
* src/mathed/InsetMathHull.C
(InsetMathHull::doDispatch): move code for ref insert to InsetMathNest
(InsetMathHull::getStatus): move code for ref insert to InsetMathNest
* src/mathed/InsetMathNest.C
(InsetMathNest::doDispatch): move code from InsetMathHull here
(InsetMathNest::getStatus): move code from InsetMathHull here
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15189 a592a061-630c-0410-9148-cb99ea01b6c8
* BufferView
- layoutChanged: new boost signal.
- LyXView owner(), owner_: deleted
* text3.C
- emit BufferView::layoutChanged instead of calling LyXView::setLayout directly
- LFUN_MOUSE_RELEASE: delete LyXView updateMenubar() and updateToolbars() direct calls.
The update is of both bars is done in WorkArea::dispatch().
* WorkArea.C
- dispatch(): add LyXView updateMenubar() call.
* LyXView
- connects to BufferView::layoutChanged directly to Toolbars::setLayout()
- setLayout(): deleted.
* qt4/GuiImplementation: modify BufferView construction (without LyXView).
All other files: cleanup header declaration of LyXView.h
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15153 a592a061-630c-0410-9148-cb99ea01b6c8
The associated WorkArea is then responsible to connect these signals to its LyXView parent.
* BufferView:
- showDialog, showDialogWithData, showInsetDialog: new boost signals
* LyXView:
- connectBufferView(), disconnectBufferView(): new method in charge of the connection/disconnection of the above signal to associate private methods (showDialog(), etc).
* WorkArea
- setBufferView(): will connect/disconnect the BufferView to its LyXView parent.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15068 a592a061-630c-0410-9148-cb99ea01b6c8
* src/frontends/qt[34]/qt_helpers.[Ch]
(toqstr): add variant for docstring
(qstring_to_ucs4): Use docstring and port from qt4 to qt3
* Many other files: Many std::string -> lyx::docstring conversions
* src/support/lstrings.[Ch]
(subst): Add variant for docstring and char_type
(externalLineEnding): std::string -> lyx::docstring
(internalLineEnding): std::string -> lyx::docstring
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@14871 a592a061-630c-0410-9148-cb99ea01b6c8
* src/mathed/math_symbolinset.C
(void MathSymbolInset::maxima):
- newer maxima versions use inf instead of INF
- add support for greek pi
(void MathSymbolInset::mathematica):
- add support for \cdot
* src/mathed/math_stringinset.h
- account for the const version of asStringInset()
* src/mathed/math_extern.C
(bool extractScript):
- added bool superscript to formal parameters in order
to only extract superscripts
(MathArray::iterator extractArgument):
- leave out delimiters and a possible superscript
for function arguments
(bool isKnownFunction):
(bool extractFunctionName):
- recognize standard and user defined function names
(void splitScripts):
- correctly split scripts as expected by other functions
(MathAtom replaceDelims):
- ranamed as replaceParenDelims
(bool testOpenBracket):
(bool testCloseBracket):
- test for "[" and "]", respectively
(MathAtom replaceBracketDelims):
- replace something delimited by "[" and "]" with a
proper DelimInset
(void extractDelims):
- create a DelimInset for "[" and "]" delimiters, too
(void extractFunctions):
- improved recognition of function names
(bool testTermDelimiter):
- test for '+' or '-' as term delimiters
(MathArray::iterator extractTerm):
- extract a "term", i.e., something delimited by '+' or '-'
(bool testDiffItem):
- improved recognition of a "differential fraction"
(void extractDiff):
- call splitScripts() on numerator and denominator of a
differential fraction before analyzing them
(void extractLims):
- improved recognition of a limit function
(void extractStructure):
- reorganized order of searches
(MathArray pipeThroughMaxima):
- newer versions of maxima use simpsum instead of SIMPSUM
(string fromMathematicaName):
- translates from mathematica names
(MathArray pipeThroughMathematica):
- calls mathematica and collects its output
(MathArray pipeThroughExtern):
- add support for mathematica
* src/mathed/math_numberinset.C
* src/mathed/math_numberinset.h
(void MathNumberInset::mathematica):
- add support for mathematica
* src/mathed/math_matrixinset.C
* src/mathed/math_matrixinset.h
(void MathMatrixInset::mathematica):
- add support for mathematica
* src/mathed/math_diffinset.C
* src/mathed/math_diffinset.h
(void MathDiffInset::maxima):
- add support for maxima
(void MathDiffInset::mathematica):
- mathematica uses "D" and not "Dt" for normal derivatives
* src/mathed/math_liminset.C
* src/mathed/math_liminset.h
(void MathLimInset::maxima):
- add support for maxima
(void MathLimInset::mathematica):
- mathematica uses "Limit" and not "Lim" for limits
* src/mathed/math_exfuncinset.C
(string asMathematicaName):
- added some more function names
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@14865 a592a061-630c-0410-9148-cb99ea01b6c8
* src/support/docstring.[Ch]
(from_ascii): new conversion function
(from_utf8): new conversion function
(to_utf8): new conversion function
(operator==) new, compare docstring and ASCII C string
(operator!=) new, compare docstring and ASCII C string
* src/support/Makefile.am: add new file docstring.C
* development/scons/scons_manifest.py: ditto
* src/funcrequest.[Ch]
(argument): change name to argument_ and type to docstring,
add an accessor
(FuncRequest): Add two new constructors taking a docstring argument
* all other files: adjust to the FuncRequest changes above
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@14861 a592a061-630c-0410-9148-cb99ea01b6c8
element (like {a'}^{2}). (froward port from 14802)
* src/mathed/math_nestinset.C (script): when creating a script
inset, handle specially previous atom if it is a MathBraceInset
(this is used in interactive input).
* src/mathed/math_parser.C (parse1): when creating a script inset,
handle specially previous atom if it is a MathBraceInset (this is
used in parsing phase).
* src/mathed/math_scriptinset.C (write): put nucleus into braces
if it contains more than one element or is itself a script inset.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@14819 a592a061-630c-0410-9148-cb99ea01b6c8
in the text.
* src/insets/insetbase.h (notifyCursorLeaves): return a bool
indicating whether cursor is invalidated.
* src/mathed/math_nestinset.C (notifyCursorLeaves):
* src/mathed/math_hullinset.C (notifyCursorLeaves): adapt to
prototype change.
* src/mathed/math_scriptinset.[Ch] (notifyCursorLeaves): return
true when an inset has been deleted.
* src/BufferView.C (mouseSetCursor): do not call dEPM when cursor
is invalidated by notifyCursorLeaves.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@14796 a592a061-630c-0410-9148-cb99ea01b6c8
* math_scriptinset.C (notifyCursorLeaves): call recordUndoInset
before deleting a cell; if the nucleus does not have scripts
anymore, delete it and replace it by its contents at enclosing
level.
(write): output scripts even when they are empry.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@14793 a592a061-630c-0410-9148-cb99ea01b6c8
