The changes that accomplish this part are in ModuleList.{h,cpp}, configure.py, and the *.module files themselves. This is a format change, and the lyx2lyx is in those files.
By itself, that change would not be major, except for the fact that we do not want the module to be represented in the UI by its filename---e.g., theorems-std---but rather by a descriptive name, such as "Theorems". But that change turns out to be wholly non-trivial. The mechanism for choosing modules was the same as---indeed, was borrowed from---that in GuiCitation: You get a list of modules, and choosing them involves moving strings from one QListView to another. The models underlying these views are just QStringListModels, which means that, when you want to know what modules have been selected, you see what strings are in the "selected" QListView. But these are just the descriptive names, and we can't look up a module by its descriptive name if it's been translated. That, indeed, was the whole point of the change to the new representation.
So, we need a more complicated model underlying the QListView, one that will pair an identifying string---the filename minus the extension, in this case---with each item. This turns out not to be terribly difficult, though it took rather a while for me to understand why it's not difficult. There are two parts:
(i) GuiSelectionManger gets re-written to use any QAbstractListModel, not just a QStringListModel. This actually seems to improve the code, independently.
(ii) We then subclass QAbstractListModel to get the associated ID string, using the Qt::UserRole slot associated with each item to store its ID. This would be almost completely trivial if QAbstractListItem::itemData() included the QVariant associated with this role, but it doesn't, so there are some additional hoops through which to jump.
The new model, a GuiIdListModel, is defined in the files by that name. The changes in GuiSelectionManger.{h,cpp} make it more abstract; the changes in GuiDocument.{h,cpp} adapt it to the new framework.
I've also updated the module documenation to accord with this change.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@22501 a592a061-630c-0410-9148-cb99ea01b6c8
This is Part I: The changes to the layout files and modules. Part II, still
to come, will involve lyx2lyx to help people who were using the older classes.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@22461 a592a061-630c-0410-9148-cb99ea01b6c8
(entry for the LaTeXConfig.lyx file follows when bug 4460
http://bugzilla.lyx.org/show_bug.cgi?id=4460
is fixed)
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@22393 a592a061-630c-0410-9148-cb99ea01b6c8
* GuiMenubar: freed from GuiView and QMenuBar, renamed to 'Menus'
* GuiView: just use the standard QMenuBar.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@22308 a592a061-630c-0410-9148-cb99ea01b6c8
22077, 22078, 22079, 22080, 22081.
Sorry Peter, but this was breaking too many things, see discussions
on lyx-devel.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@22101 a592a061-630c-0410-9148-cb99ea01b6c8
- rename former "pagebreak" to "newpage" since it produces a \newpage
- new LFUN
- menu entry
- tex2lyx support
- fileformat change
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@21732 a592a061-630c-0410-9148-cb99ea01b6c8
- UserGuide updates
- new translation of the EmbeddedObjects manual
done by Siegfried MEUNIER-GUTTIN-CLUZEL
- remove the file examples/fr/ExemplesTableaux.lyx since we have this now in the EmbeddedObjects.lyx manual (as I did for the other lanuages some weeks ago)
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@21560 a592a061-630c-0410-9148-cb99ea01b6c8
* Font::FontBits -> FontInfo
* Font::FONT_XXX -> all enums transfered to FontEnums.h and renamed to FontXxx
I've replaced Font uses with FontInfo were the language() member was not needed, basically all draw() and metrics methods. There's one problematic cases with InsetQuotes which I solved by taking the Buffer main language.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@21240 a592a061-630c-0410-9148-cb99ea01b6c8
by default read from lib/commands/default.def
A .def file allows to define a command with
\define "Name" "lfun"
where Name is the name of the new command and lfun is the code
to be executed.
\def_file "FileName"
allows to include another .def file.
The implementation of CmdDef is similar to KeyMap, i.e. there is
one instance created in the LyX.cpp that reads the .def file, holds
a list containing all definitions, and supplies access methods.
LFUN_CALL: The new lfun is used to execute a command definition, e.g.
call Name
If a toolbar item has the associated action "call Name" then the image
lib/images/commands/Name.png is used for the button.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@21093 a592a061-630c-0410-9148-cb99ea01b6c8
- rename the lfun to href-insert.png
- rename the files to Hyperlink...
- the former URLUi produces now \href commands (hyperref)
Only missing thing is the lyx2lyx conversion routine - this will be done by Richard
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@20950 a592a061-630c-0410-9148-cb99ea01b6c8
scons_manifest.py: dito
André, please check if you can compile before you commit
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@20721 a592a061-630c-0410-9148-cb99ea01b6c8
Design goal: Allow the use of layout "modules", which are to LaTeX packages as layout files are to LaTeX document classes. Thus, one could have a module that defined certain character styles, environments, commands, or what have you, and include it in various documents, each of which uses a different document class, without having to modify the layout files themselves. For example, a theorems.module could be used with article.layout to provide support for theorem-type environments, without having to modify article.layout itself, and the same module could be used with book.layout, etc.
This first patch does some reworking of the infrastructrue. We need to distinguish between the TextClass that a particular document is using and the layout of that document, since modules, in particular, can modify the layout. The solution adopted here is to add a TextClass pointer to BufferParams, which will hold the layout. The layout itself is then constructed from the TextClass the document is using. At present, this is completely trivial, but that will change when modules are added.
The pointer in question is a boost::shared_ptr. This is needed because CutAndPaste saves a copy of the layout with each cut or copied selection. We cannot assume the selection vanishes when the document is closed, so there are two options: (i) keep a list of all the layouts that have ever been used by any document; (ii) used some kind of smart pointer. The latter seems preferable, as the former would waste memory. More importantly, the use of a smart pointer allows modules to be modified on disk and then reloaded while LyX is running, and it will eventually allow the same for layout files.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@19756 a592a061-630c-0410-9148-cb99ea01b6c8
The changes are essentially of three types.
First, the std::maps previously used here for storing BibTeX data have become full-fledged classes and so what were previously just a bunch of functions have now become methods of these new classes. This leads to a lot of minor changes in other files, to adapt to the new signature. The changes in insets/ are mostly of this kind.
Second, there are some slightly more substantial changes in src/insets/InsetBibtex.cpp. We now store lists of the field names and entry types that have been used.
Finally, there are the changes to the citation UI. These are mostly straightforward, though adding the new functionality exposed some inadequacies in the previous code that also had to be fixed.
One other change: BibTeX keys are now docstring. This solves some Unicode issues.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@19657 a592a061-630c-0410-9148-cb99ea01b6c8
a structure representing field->value instead of just a single string with
all the data. The data structures are defined in src/Biblio_typedefs.h, and
the main changes are to the parser code in src/insets/InsetBibtex.cpp.
-src/Biblio_typedefs.h
Contains typedefs for new representation. Separating them out limits how much
gets #include'd by other files, and also resolves a circularity problem with
Buffer.h.
-src/Biblio.{h,cpp}
Signature changes and massive simplifications to routines that report
BibTeX data, since we now have an articulate representation.
-src/insets/InsetBibtex.{h,cpp}
Re-write the parser code so we store a key->value map of the BibTeX data
rather than just one long string. This is the main work.
-src/frontends/controllers/ControlCitation.{h,cpp}
-src/insets/InsetBibitem.{h,cpp}
-src/insets/InsetCitation.cpp
Adaptations and simplifications.
-src/insets/Inset.h
-src/Buffer.{h,cpp}
-src/insets/InsetInclude.{h,cpp}
Signature changes.
-src/Makefile.am
-development/scons/scons_manifest.py
Add src/Biblio_typedefs.h
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@19598 a592a061-630c-0410-9148-cb99ea01b6c8
information is acquired. This involves (i) moving the bulk of fillWithBibKeys()
into Biblio.cpp, (ii) introducing a virtual method Inset::fillWithBibKeys() that,
by default, does nothing, and (iii) over-riding this method in the insets that do
need to do something.
This is all preparatory for a more substantial re-working of the BibTex code,
which should follow shortly.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@19565 a592a061-630c-0410-9148-cb99ea01b6c8
- correct menu names
- add descriptions about index generation, font and graphic formats - to tell only examples
The document is ready except of the outliner and note descriptions.
The description of LyX's menus (Appendix A), and the preferences dialog (Appendix B) will be completed step by step, hopefully with some help.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@19389 a592a061-630c-0410-9148-cb99ea01b6c8
* src/support/gzstream.h: re-introduce the stream we were using in
1.4.x. The boost iostream solution produces unreadable streams
on windows and we do not know why currently.
* src/support/Makefile.am:
* src/Buffer.cpp:
* src/Lexer.cpp:
* development/scons/scons_manifest.py: adapt.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@19271 a592a061-630c-0410-9148-cb99ea01b6c8
The key is the new copier script lib/scripts/ext_copy.py. Usage:
ext_copy.py [-e ext1,ext2,...] <from file> <to file>
Given a <from file> and <to file>, it will copy all files in the directory
in which from_file is found that have the extensions given in the -e option,
or all files in that directory if no such argument is given. So, for example,
we can do:
python ext_copy.py -e png,html,css /path/from/file.html /path/to/file.html
and all html, png, and css files in /path/from/ will be copied to the
(possibly new) directory /path/to/file.html.LyXconv/. The -t option determines
the extension added to the output filename passed to the script ($$o, in the
copier definition), the default being "LyXconv". If just . is given, then no
extension is added.
Other changes:
* configure.py: added appropriate copier definitions for html and wordhtml
formats, as well as for the Program pseudo-format.
* lib/Makefile.am and development/scons/scons_manifest.py: add ext_copy.py.
* lib/doc/Customization.lyx: update documentation.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@18791 a592a061-630c-0410-9148-cb99ea01b6c8
