Tweak the algorithm so that a BOX math row element can have some
spacing. To this end, MathRow::before/after do not look at the type of
an element for deciding when to skip it, but rather to its math class.
In the new setting, the spacing algorithm works on all elements, but
skips the MC_UNKNOWN elements as if they were not present. As a
consequence, the two element types BEGIN and END have been replaced by
a single DUMMY (they can be recognized from their class).
To simply the code, add a new `mclass' argument to the
MathRow::Element constructor (default is MC_UNKNOWN).
Macro nesting is now recorded into the macro inset itself. This allows
the ArgumentProxy inset to determine whether it is editable or not by
looking at its macro.
Remove code in the metrics and draw methods of ArgumentProxy: this
code is AFAICS not active anymore, since arguments are linearized into
math rows.
Use Changer idiom to change locally the values of MecticsInfo::base.macro_nesting.
This is a long standing issue, present since the new math macros
inception in version 1.6. It manifests as a display issue when a
macro with optional arguments appears in the optional argument of
another macro. In this case the display is messed up and it is
difficult, if not impossible, changing the arguments as they do not
appear on screen as related to a specific macro instance. It also
manifests as latex errors when compiling, even if the latex output
is formally correct, due to limitations of the xargs package used
to output the macros. Most probably, both aspects have the same
root cause, as simply enclosing in braces the macro and its
parameters solves both issues. However, when reloading a document,
lyx strips the outer braces enclosing a macro argument, thus
frustrating this possible workaround.
This commit solves the display issue by correctly accounting for
macros with optional arguments nested in the argument of another
macro, and circumvents the xargs package limitations causing errors
by enclosing in braces the macros with optional arguments appearing
in the argument of an outer macro when they are output. This means
that when loading an old document with such macros and saving it
again, the macro representation is updated and will have these
additional braces. However, as such braces are stripped by lyx on
loading, there is no risk that they accumulate.
See also this thread:
http://www.mail-archive.com/lyx-devel@lists.lyx.org/msg197828.html
This fixes the "bad keming" of math ERT (in fact wrong metrics) which recently
was worsened by InsetMathChar substitutions and their MathClass spacing.
Also fix a small inefficiency: always prefer:
Changer dummy = (currentMode() == TEXT_MODE)
? pi.base.font.changeShape(UP_SHAPE) : Changer();
over:
Changer dummy = pi.base.font.changeShape((currentMode() == TEXT_MODE)
? UP_SHAPE : pi.base.font.shape());
The former only records and restores a value when the condition is satisfied,
and does not cost anything otherwise.
In fact having an extra parameter "bool cond" is no longer useful because it can
now always be emulated with a ternary operator:
Changers dummy = cond ? do_change() : Changer();
* Factor code for easier maintainance.
* Avoid computing metrics several times. This duplication explained the
exponential blowup during the metrics phase for nested fractions (see
b2b87330). This happened in particular when using lyxproofs which heavily uses
nested \dfracs for on-screen drawing.
* Call MetricsBase::changeScript instead of MetricsBase::changeFrac for
\nicefrac and \unitfrac.
Move math style to FontInfo and compute the font sizes for scriptstyle and
scriptscriptstyle according to standard proportions: 0.73 and 0.55.
This is simpler and more accurate. It also fixes the font size of
${\scriptscriptstyle {\textstyle A}}A$ which exposed the limitations of the
previous approach.
There is no reason to reserve pixel space in macros replacement text,
which is not editable. This makes macros more compact and eases the
writing of lib/symbols.
* introduce new InsetMath::drawMarkers and friends that do nothing
when nested inside a macro. This required to move macro_nesting
inside MetricsBase, and to pass MetricsInfo & to metricsMarkers.
* keep track of nesting when drawing rows or macros.
Empty insets should use a minimal amount of space, especially when
they are part of a built-in macro in lib/symbols.
With this change, blue rectangles signal actually editable places.
Empty macros in editable data are shown as grey boxes, but they do not
appear when further nested.
This is done by adding a new type BOX of MathRow::Element object and a
MetricsInfo::macro_nesting that keeps track of macros (and is reset to
0 in editable macro arguments).
* new MathRow class which contains the description of a MathData
object in terms of math class and spacing
+ macros and their arguments used in the MathData object are
linearized (replaced with their contents) so that all math insets
are typeset as a string together. To this end, we introduce a
method addToMathRow to InsetMath and MathData. This method allows
to linearize recursively a MathData object.
+ It is then necessary to set manually the dimension and position of
the macros and arguments.
+ the class class and spacing are computed using the MathClass helpers.
The MathRow data is cached in the MathData object in a bufferview-dependent
way (different dpi for different screens).
* delegate most of the work MathData::metrics/draw to MathRow metrics/draw.
The case of draw is trickier, since many draw() methods rely on their
metrics without any spacing added.
This implements the relevant math typography rules described in the
Appendix G of the TeXbook. More precisely, for each atom
+ the class is computed by implementing rules 5 and 6 of Appendix G
+ the spacing is computed according to the table p. 170
This code is not used at this point.
This done according to the TeXbook. This class replaces the individual
isMathXXX() methods. The mathClass() method (currently unused) is
provided for the following insets:
* InsetMathChar (with a revised list of affected characters)
* InsetMathSymbol: the class is given by the `extra' field
Operators defined in lib/symbols (e.g. \log) are MC_OP
* InsetMathFrac is MC_INNER (except nicefrac and units)
* InsetDelimiters is MC_INNER
* InsetStackrel is MC_REL
* The class of InsetScript is the class of the last element of its
nucleus (yes, it is a hack, but doing it right is more work).
Remove the explicit spacing that was done in the different insets. The spacing
will be reintroduced properly in a forthcoming commit.
* set up a replacement of *, -, and : by the adequate symbols (#9893)
* fix the wrong character selection and operator spacing in \text mode
* hide some internal symbols from the auto-completion.
* Fix spacing in lib/symbols after recent commits about math spacing, as well as
older spacing issues (e.g. \Join).
* InsetMathKern now uses the same em value as other math length commands.
What is nice is that the kerning amount now matches the ones found in the
packages definition (modulo 10mu that lyx currently adds between relations).
Testcase: $\CheckedBox\LEFTcircle\RIGHTcircle\photon\gluon\vcentcolon\dblcolon\Coloneqq\eqcolon\models\hookrightarrow\bowtie\hookleftarrow\Join\APLinv\neq$
When \multicolumn{ncol}{align}{content} is parsed and the ncol
parameter is not a numeric value, this parameter is swallowed
and replaced with '1'. Hence, if the file is subsequently saved
a dataloss would occur. With this commit, \multicolumn is not
interpreted when ncol is not a numeric value and is left as is.
See also #10466
Math macros can be displayed on screen by providing a different
representation than the one used for latex output. This representation
is actually used by lyx even while it is being updated. This leads to
printing useless error messages on the terminal. For example, a macro
parameter has to be entered as \#1 and, if the macro is already used in
a math inset, lyx prints on terminal the error message "Math parse error:
missing token after \\" as soon as one hits the \ key, followed by
"MathMacroArgument::MathMacroArgument: wrong Argument id: -48" as soon as
one hits the # key. So, this is not a useful information and simply
clutters the terminal output. On the other hand, the input is sanitized
even if one stops input after hitting either \ or #, so that no further
messages are issued. Hence, those error messages are simply pointless.
Also use the exact amount of vertical space TeX adds after a
math display (instead of 1ex) for vertically shifting the box.
We have to use \belowdisplayshortskip here, instead of
\belowdisplayskip, because the math formula is typeset by alone
in a box, and thus there is no following line.
It should be now possible underlining or striking out any kind
of math inset containing any math construct indigestible to ulem.
While this was already possible for inline math insets, they could
have break if an aligned environment was used, for example.
This is now possible also for diplay math. Even if this can be
nonsensical and not visually perfect, at least no latex errors
should be generated if one tries to.
Font changes are brought inside the \lyxdeleted macro, just before
outputting the latex code for the math inset. The inset writes a
signature before itself and this is checked by \lyxsout for recognizing
a display math. So, the font changes confuse \lyxsout, which also
swallows the first macro at the very start of \lyxdeleted. The result
is that the font changing command is not seen by latex and \sout is also
used to further strike out the formula already striked out by tikz.
This commit makes sure that the expected signature actually appears
just after the opening brace of \lyxdeleted. It also accounts for a
paragraph break occurring just before the math inset, in order to not
introduce too much vertical space, which is noticeable when using
larger font sizes.
LaTeX refuses to break a line when it is empty. But we have to start
a new line here, otherwise the whole displayed equation would be
typeset as it were inline with previous content. The solution is to
put a zero-length space just before the line break. Moreover, this
is the right thing to do, as it simulates the extra space that is
normally added in this circumstance.
Showing deleted display math by enabling "Show Changes in Output" was
only possible with dvi (through dvipost). Although LyX strikes out
such formulas on screen, it was impossible obtaining an output
directly using pdflatex (or other engines producing pdf) because
ulem cannot cope with display math material and gives errors.
The solution is to strike out by ourselves such deleted formulas.
I took into account several options. One of them would produce
an output similar to dvipost (which strikes out each element), but
would have required much more changes in the output routines.
Eventually, I opted for using tikz, which gives a more clean
output (as it requires to simply adding a preamble and a postamble
to the latex code of any displayed math, instead of a mark up
tailored to each particular math construct). The look of the pdf
output is similar to the way LyX strikes out the equations on screen.
* New virtual functions leftMargin() and rightMargin() to get rid of
drawWithMargin()
* Factor and rewrite code for borders.
* Fix several offset calculations.
Known issues:
* Borders of multicols look too good and do not correspond to the pdf
output. (non-regression)
* Bounding box for Hull (Regexp) not pixel-perfect.
* Bounding boxes of Diagram, XYmatrix, are too tight when there are
borders. Also border should be disabled. (non-regression)
Trying to spare a few cycles by avoiding computing metrics during
screen updates and export. See also 8f86ee74, 72cf7c8f, and e36a8903.
Guillaume will tell whether this also avoids crashing his documents ;)
Some macros defined in the lib/symbols file are classified are texmode.
But the MathMacro class was missing a currentMode method for returning
this information.
Revert to the strategy used at 8f86ee74 but not using mathedWordList
because it may be still uninitialized at load time. Instead, use the
globalMacros method for getting the same info.
There was a thinko at 8ec91e80, because globalMacros always returns
null for user defined macros.
It may happen that mathedWordList is not still updated at load time,
so we would still be using a bogus pointer. Better fetching the
necessary info from the global macro table.
The math macros system is quite complex. Macros are updated during
metrics calculation, so a missing update is very likely to cause a
crash. This commit tries to assure that they are updated at export
time, which also happens when the table of contents is updated.
Moreover, in order to circumvent a possible missing update, when
a math macro is detected we try to avoid using the sym_ member
of the MacroData class, as it may contain bogus values.
If the first character in the first cell of an aligned math environment is
'[', and the environment does not use top or bottom vertical alignment,
then LyX did write the '[' unprotected so that it got misinterpreted as
optional argument, both when reading the .lyx file in LyX and when reading
the .tex file in LaTeX => data loss!
The fix is to output an empty optional argument in this case, which is
interpreted as default alignment both by LyX and LaTeX. It would also be
possible to output \[ in the first cell instead, but this would be more
difficult to implement.
The \multicolumn command allows to set vertical lines for individual rows.
These are not yet displayed, but if they are supported one day, the code in
a27ff13663 needs to be adjusted. This change hints at the adjustment.
This is a fixup to commit 39329935. The two fixes are
* add forgotten offset `y' when drawing the line
* in order to have a continuous vertical line, draw from the offset of
the previous row.
Fixes bug #10363.
Now by default all insets paint their own background when needed. This
means that 63cf3297 and part of 9940acc5 can be reverted.
To avoid extra painting, background drawing is disabled for
InsetCommand and InsetCollapsable. These insets draw background as
part of their normal drawing activity.
This will avoid drawing artifacts with InsetNewpage, InsetVSpace and
probably some others.
For reference, the bug was that quote insets grew bolder because, when
painted over themselves, anti-aliasing made them darker.
It turned out that the fix there created others than were
painstakingly fixed: #7164, #7165, #7174, #7193... More recently, it
created other problems:
http://article.gmane.org/gmane.editors.lyx.devel/163471
We use the right fix here:
* draw background of quote inset when not doing full repaint
* draw background of math macro template when not doing full repaint
* remove hack that grew from #4889 fix.
This is the well known file locking problem: The TempFile class keeps the
created file locked for the own process, and this prevents the CAS to read it.
The main thing it does is integrate mouse-modifiers into the
FuncRequest machinery. Previously, these had to be passed
separately, which led to some ugly function signatures.
There was also an unnecessary form of the constructor, which
can now be removed.
No change of behavior is intended.
The only exceptions are:
- The purpose of the header is to drag in the used symbol, e.g. unique_ptr.h
- The used symbol is inside a class or a namespace other than lyx
The reason for this is that global 'using' statements effectively forbid to
use the used symbols in any other namespace in the whole program, since simply
adding or removing an #include of the corresponding header subtly changes the
name lookup. The namespace lyx is sort of global, so it should not have these
statements either.
Maxima uses \it as a markup for multiletter variables. However,
it has been reported that since texlive 2016 using \it in math
mode produces an error, even though I was not able to reproduce.
Anyway, this can be avoided by replacing the old-style construct
"{\it ...}" with the new-style one "\mathit{...}".
The problem has also been reported upstream:
https://sourceforge.net/p/maxima/bugs/3181/
but this workaround will hold whatever the resolution.
This was dead code that did never work, and most of it was boilerplate that
you can steel in 15 minutes from any existing math inset. Apart from that it
did contain a pointer to InsetXYMatrix which would create the same problems
we saw with the macros.
This requires to change many docstrings into std::strings. The logic behind that
is that they represent a fixed set of math fonts, and therefore “string” means
here “poor man's enum” rather than text (this is consistent with MetricsBase).
Profiling of scrolling inside a document over macro-instensive areas:
Before the patch:
44,1% BufferView::updateMetrics()
-> 34,8% InsetMathHull::metrics()
-> 9,8% FontSetChanger::FontSetChanger()
28,4% BufferView::draw()
After the patch:
35,3% BufferView::updateMetrics()
-> 27,2% InsetMathHull::metrics
-> 0,4% FontSetChanger::FontSetChanger()
47,5% BufferView::draw()
FontSetChanger::FontSetChanger() is made 41x less expensive (with reference
BV::draw()) just by removing this conversion. The remaining 0,4% could be
squished by replacing the strings with a proper enum, but this is premature. Of
course, this only treats the symptoms: there is no good reason that this
function is called 45500 times over the time of 40 repaints.
Replace the manual manipulation of a stack of RowEntries with a Changer
function. When I introduced the stack of RowEntries, I did not know about the
Changer mechanism.
RefChanger temporarily assigns a value to a non-const reference of any
kind. RefChanger provides a flexible and uniform generalisation of the various
scope guards previously derived from the old Changer class in MetricsInfo.h.
As before, a temporary assignment lasts as long as the Changer object lives. But
the new Changer is movable. In particular, contorsions are no longer needed to
change a private field. Special code can be moved into the appropriate classes,
and it is no longer necessary to create a new class for each specific use.
Syntax change:
FontSetChanger dummy(mi.base, value);
-> Changer dummy = mi.base.changeFontSet(value);
New function for generating arbitrary Changers:
Changer dummy = make_change(ref, val, condition);
Bugfix:
* Fix the display of \displaystyle{\substack{\frac{xyz}{}}} (missing style
change).
This is a mechanical replacement. For now it seems that unique_ptrs are
essentially used for exception-safety. More could certainly be done to clarify
pointer ownership in general.
The parameter passed to allowDisplayMath will need to be copied, so it
made sense to pass it by value. Since Coverity complains about that,
the code is rewritten to make the copy explicit.
This is a first cleanup step. More complex rules have to be
implemented on top of this.
Use proper spacing \thinmuskip, \medmuskip and \thickmuskip instead of
ad-hoc values.
Rename isRelOp to isMathRel and introduce isMathBin and isMathPunct
(for InsetMathChar and InsetMathSymbol). Update the categories of
characters in InsetMathChar according to LaTeX source (fontmath.ltx).
Set correctly the spacing around mathrel, mathbin and mathpunct
elements. Use \thinmuskip around MathDelim instead of a hardcoded 4.
This is related to bug #8883.
The old name would be confusing wrt setSelection(), which does additional checks.
This one is a pure acessor, and the more complete methods are
* setSelection(), which avoids empty selections
* clearSelection(), which resets anchor, and sets word selection and mark more to false.
Most of the code should use these two instead of selection(bool), but this is for later.
Some headers contain
class Foo;
whereas there is no class Foo.
The list of class statements is given by
classes=`git grep '^\(class\|struct\) [a-zA-Z_:]*;' src | sed 's/^.* \(.*\);/\1/'|sort -u`
The ones that are useless are:
for c in $classes ; do grep -r "\\<$c\\>" src| grep -vq '^[^:]*:\(class\|struct\) [a-zA-Z_:]*;' || echo "$c"; done
Those two functions used two different hackish and buggy
implementation to know when the function is disabled. Replace that by
asking the containing inset whether it accepts inserting display math
inset.
Fixes bug #10033.
The old name conflicted with the newly introduced Inset::isTable.
Now the meaning is as follows.
* Inset::isTable() is true when the inset is composed of lines and columns
* InsetMathHull::allowsTabularFeatures is true when the current type of hull allows for tabular-like functions.
inset-select-all has 3 levels
1. select current cell
2. select all cells
3. select inset from outside.
The second level makes sense for tables (text and math), but not for things like a math fraction.
Introduce a new method Inset::isTable() that allows to detect this case properly and skip level 2.
Remove in particular all comparisons < and >= involving HullType.
Add a guard to make sure that mutate() only operates on types it has been
designed for. Then I figured I could use this new knowledge to give feedback
when math-mutate is not implemented via getStatus(). (To test this, insert a
regexp in Advanced Search & Replace and try to change it into a standard
equation via the contextual menu.)
AMS align environment should have some spacing between odd and even columns.
Add a new virtual method displayColSpace() to InsetMathGrid, InsetMathHull and
InsetMathSplit.
A longstanding problem... (related: #1861)
The columns in AMS math environments have a fixed alignment (colAlign() in
InsetMathGrid.cpp). We set this alignment for display (Georg's
displayColAlign()) in InsetMathHull and InsetMathSplit. This is done according
to tests and documentation for the various environments.
There is also some mechanical code factoring via colAlign().
Finally, I disable setting the horizontal alignment in InsetMathSplit, which has
no impact on the LaTeX output, and has no longer any impact on the screen. (As
for vertical alignment I discovered that it was in fact customisable for
\aligned & friends! I hope that the more faithful interface will let other
users discover that too.)
This fixes a failing unit test with 32bit gcc 4.9.3 and -O2 optimization:
It computed 9953 instead of 9954 for Length::inPixels() of value 2342.
The reason for this is probably different rounding behaviour caused by storing
the unrounded value in a processor register (uses 80bit accuracy) vs. writing
it back to memory (uses 64bit accuracy). The unrounded value is very close to
9953.5 (which is not representable as an exact IEEE floating point value).
Apart from that, having a proper function for rounding makes the code more
readable, and has the nice side effect to make Length::inPB() work for
negative lengths as well.
This concerns InsetPreview, InsetIPA and InsetMathHull.
Caching such a value is bad when opening the same buffer in two views.
In this case, it is not necessary to remember use_preview_ at all,
actually.
Also remove private member dim_ which is not used and remove some trailing whitespace.
Fixes bugs #9085 abd #9957.
The tabular-features LFUN was merged with "inset-modify tabular" when
simplifying the tabular dialog at b5049e7. This choice later indirectly caused a
few regressions (#7308, #9794).
I reintroduce tabular-feature to allow more flexibility for user
commands, whereas "inset-modify tabular" is now reserved for the tabular
dialog. In particular, inset-modify tabular is no longer caught by math grid
insets. The name tabular-feature is kept to avoid renaming icons.
Known issues:
* After successfully applying a tabular command, the cursor is truncated to the
table.
* Note that the tabular dialog still has similar issues that are inherited from
the achitecture of the dialog menu. For instance the pref change can be
mis-dispatched to an inset inside a cell and cause an error, for instance:
Lexer.cpp (934): Missing 'Note'-tag in InsetNote::string2params. Got
tabular instead. Line: 0
Maybe the inset-modify LFUN should be modified to treat commands coming from
the wrong dialog (by checking the type) as unknown and undispatched so that
the parent can get it. In that case a non AtPoint variant of inset-modify
could be reintroduced in order to generalise tabular-feature. See:
http://mid.gmane.org/n4rdk1$efj$1@ger.gmane.org
AMS align environment should have some spacing between odd and even columns.
Add a new virtual method displayColSpace() to InsetMathGrid, InsetMathHull and
InsetMathSplit.
I have no clue why this was automatically committed, I just applied the path, nothing more.
This reverts commit bb5470b5d1.
# Conflicts:
# src/mathed/InsetMathGrid.cpp
# src/mathed/InsetMathSplit.cpp
AMS align environment should have some spacing between odd and even columns.
Add a new virtual method displayColSpace() to InsetMathGrid, InsetMathHull and
InsetMathSplit.
A longstanding problem... (related: #1861)
The columns in AMS math environments have a fixed alignment (colAlign() in
InsetMathGrid.cpp). We set this alignment for display (Georg's
displayColAlign()) in InsetMathHull and InsetMathSplit. This is done according
to tests and documentation for the various environments.
There is also some mechanical code factoring via colAlign().
Finally, I disable setting the horizontal alignment in InsetMathSplit, which has
no impact on the LaTeX output, and has no longer any impact on the screen. (As
for vertical alignment I discovered that it was in fact customisable for
\aligned & friends! I hope that the more faithful interface will let other
users discover that too.)
Gcc STL debugging feature asserts when swapping an object with itself. This happens in some cases with math grids that have only one column.
A quick review of other uses of swap() in the code base did not reveal any other dubious case.
Fixes bug #9902.
The pointer macroInset points to a vector element. When another element is inserted in this vector, some reallocation occur and the pointer points to a deleted element.
This does not crash LyX by default, but it is bad enough to make valgrind cry.
See ticket #9804.
We already have a CoordCache of insets dimensions. It is not necessary
to store the same information in two places.
Give a name to CoordCache tables types to improve code readability.
Remove ParagraphMetrics::singleWidth, which is not used anymore.
This deep copy used to mess with the unique identifier: what TexRow saw was
different from the original uid. There may also be performance improvements.
(Using Georg's suggestion)
These features are active in DEVEL_VERSION when Debug is set to LATEX.
1. The TexRow information is prepended to the source panel.
2. Clicking on any line in the source triggers reverse search. (This would be an
interesting feature to implement on the user side, but we need a proper LFUN.)
WriteStream is now built from an otexstream instead of an odocstream, and
therefore counts lines in a TexRow. Calls to TexRow are added in relevant places
in math insets.
This finishes adding line tracking for math in the source panel and for forward
search.
The id is just the memory address.
The status bar now spits out the math inset uid information when in a math cell
in DEVEL_VERSION, like it already does when in a paragraph.
This is preliminary work for extending the cursor<->row tracking to math.
These were found by cppcheck:
Member variable 'x' is not initialized in the constructor.
The crash #9788 would not have happened if this had been done earlier.
The test case did show several problems:
- The alignment argument was not parsed correctly if it was not in braces
- There one column too much created, since I did not take into account that
the current cell must bge replaced by the multicolumn cell
- If the last line of an array contained only an empty multicolumn cell, then
the complete multicolumn was swallowed
- The decision whether to output the column separator & was sometimes wrong
for multicolumns
This fixes the crash of bug #9788. However, the misparsing of \multicolumn
is still there: LyX thinks that the array has three columns, it inserts an
additional one before the multicolumn.
Use the function support:truncateWithEllipsis() to shorten a docstring with
... at the end. Actually we use U+2026 HORIZONTAL ELLIPSIS instead of "..." when
automatically shortening strings. This is to be consistent with Qt's own
truncation and is much nicer on the screen.
This includes the bugs #9575 and #9572 regarding broken text elision in the
outliner.
Known issues (non-regressions):
* TocBackend::updateItem() should be rewritten to update all TOCs. (#8386)
* "..." should be replaced with … everywhere else on the interface (including
translation strings).
* We should prefer to rely on QFontMetrics::elidedText() to truncate strings
with an ellipsis whenever possible, or an equivalent for the buffer view
dependent on the font metrics. See the warning in src/support/lstrings.h.
* New TOC "math-macro". This means that math macros can now be accessed in the
outline pane in their order of appearance or in alphabetical order, and can be
searched using the filter.
* Lists of floats now show subfloats deeper in the navigation menu
* The arbitrary 30 element cut-off after which nothing is shown except "Open
Navigator..." is removed. Menus now have no limit in size, so Qt may display
them scrollable. In exchange, we always show "Open outliner..." at the
beginning. I tested for performance issues with a rather complex document and
it is fine; but this does not exclude corner cases with lots of TOC entries of
a certain kind. If necessary, populating the navigation sub-menu should be
delayed like the main menu.
* Elements that do not contribute to the output (e.g. in a note, a disabled
branch) are now preceded with a symbol indicating this status. (The machinery
was already there; I wonder why it was not implemented already.) I have chosen
U+274E NEGATIVE SQUARED CROSS MARK.
* Fix the contextual menus in the outliner (bug introduced at 94e992c5).
* Toc item now move to the caption when present, but first center on the float,
to prevent the situation where the caption is at the top of the screen and the
contents of the float is off-screen above the caption.
(Internally, the action of the toc items can now be customised)
* Fix the LyXHTML output. Disabled captions no longer appear in the list of
figures.
Remove unwanted clearSelection()s in MathData::updateMacros(). These calls broke
text selection with keyboard and mouse, search-and-replace, restoring selection
after Undo, etc. in a document with math macros since 1.6.0. (Regression at
6aa54673 and 12314897)
I do not know the purpose of these calls, but the selection code has been worked
on since, and I cannot produce undesired behaviour after removing
them.
We introduce TocBuilder for building TOCs that take into account both float
insets and their captions.
* Floats without caption are shown with their content.
* Floats with a caption are shown with their caption, but clicking the entry now
correctly moves to the float and not to the caption.
* Subsequent captions produce additional entries in the TOC.
* Figures and subfigures are correctly ordered in the outliner.
* New TOC "senseless" for captions appearing alone (a bit like broken references
are still displayed in the menu and outliner).
* Disable LFUN_CAPTION_INSERT if there is already a caption in a listing
Known issues:
* Inconsistent output for includes located inside floats
* We should record the end of the float in addition of the beginning for a more
accurate cursor -> outliner entry conversion
(#9762)
* fixes a bug where this was already the expected behaviour of
math-subscript and math-superscript but failed.
* corrects the behaviour where if there is \newcommand in the
selection, then a corresponding macro template is introduced
instead of a math inset.
* fixes a bug where math-display, math-subscript and math-supscript
would also introduce such a macro template in a way unrelated to
their function. Now it only happens with math-mode without
arguments.
* fixes a bug where a text that does not denote a macro definition,
e.g. "aaa\newcommandaaa", would produce \invalidmacro.
These were all found by cppcheck. Even in constructors that are there "only
because of std containers" the class should be initialized correctly. You can
never know whether such an object does not get used, and then a nice crash
caused by dereferencing a NULL-pointer is better than undefined behaviour.
