blank lines may be inadvertently output. This is achieved by using two
special iomanip-like variables (breakln and safebreakln) in the lyx::
namespace. When they are inserted in the stream, a newline is output
only if not already at the beginning of a line. The difference between
breakln and safebreakln is that, if needed, the former outputs '\n'
and the latter "%\n".
In future, the new class will also be used for counting the number of
newlines issued. Even if the infractrure for doing that is already in
place, the counting is essentially still done the old way.
There are still places in the code where the functionality of the
class could be used, most probably. ATM, it is used for InsetTabular,
InsetListings, InsetFloat, and InsetText.
The Comment and GreyedOut insets required a special treatment and a
new InsetLayout parameter (Display) has been introduced. The default
for Display is "true", meaning that the corresponding latex
environment is of "display" type, i.e., it stands on its own, whereas
"false" means that the contents appear inline with the text. The
latter is the case for both Comment and GreyedOut insets.
Mostly, the only visible effects on latex exports should be the
disappearing of some redundant % chars and the appearing/disappearing
of null {} latex groups after a comment or lyxgreyedout environments
(they are related to the presence or absence of a space immediately
after those environments), as well as the fact that math environments
are now started on their own lines.
As a last thing, only the latex code between \begin{document} and
\end{document} goes through the new class, the preamble being directly
output through odocstream, as usual.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@37360 a592a061-630c-0410-9148-cb99ea01b6c8
of things like:
pit.push_back(CursorSlice(*this));
which I've had to change to:
pit.push_back(CursorSlice(const_cast<InsetCaption &>(*this)));
and similarly in a few other places.
If anyone thinks we should instead have:
explicit CursorSlice(Inset const &);
then we can also do that.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@37192 a592a061-630c-0410-9148-cb99ea01b6c8
selection and chage tracking state
InsetTabular::drawCellLines: use the above function to draw properly tabular lines after a selection.
This method can be used easily for other insets.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@35268 a592a061-630c-0410-9148-cb99ea01b6c8
Solution: don't use boost::shared_ptr for msvc10 (could also be extended to several GCC versions)
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@34259 a592a061-630c-0410-9148-cb99ea01b6c8
little things:
- rename method to what it is
- correct parameter
- bit of formatting
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@33774 a592a061-630c-0410-9148-cb99ea01b6c8
- proper message passing for all tabular features
- properly define which feature needs an argument
* replace LFUN_TABULAR_FEATURE with LFUN_INSET_MODIFY
- The math tables are also affected. In the future a common base class
between math and text table will solve this inconsistency.
- There is a hack in GuiApplication in order to not rename the toolbar
icons. This will have to be cleaned up with a general icon naming for
LFUN_INSET_MODIFY... to be discussed.
* Tabular Dialog:
- big cleanup, lots and lots of bug fixing here
- migrated to InsetParamsWidget
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@33495 a592a061-630c-0410-9148-cb99ea01b6c8
- remove things from the todo list that we already support
- add authors
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@33417 a592a061-630c-0410-9148-cb99ea01b6c8
- fileformat change (lyx2lyx code follows the next days)
- the patch is a joint work of Edwin and me
The patch is huge but the major parts work already. I put it in now as the minor known issues can be solved step by step the next days. I think this is the best solution because collaborating with such large patches already lead to copy/paste bugs.
The known issues are listed here:
http://wiki.lyx.org/Devel/Multirow
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@33414 a592a061-630c-0410-9148-cb99ea01b6c8
as to allow us to call the routine when we are preparing for output and
so to do certain things we might not want to do every time.
This is an abuse of updateLabels(), in a way, but updateLabels() long
ago became the general recurse-through-the-Buffer routine, and to
implement the sort of thing I want to do here in validate(), say, much
of the code in updateLabels()---in particular, the counter-update
code---would have to be duplicated. So I believe this is the best, and
easiest, way to go.
Actual use of the new argument will follow.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@32318 a592a061-630c-0410-9148-cb99ea01b6c8
accepting changes in a clipboard copy (CutAndPaste.cpp), we set the buffer
of insets (and we reset them later).
Doing this makes sense because we know this is the only operation on these
out-of-document paragraphs that will require access to a buffer.
Also, this commit gets rid of one explicit test against ERT_CODE and
LISTING_CODE.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@30623 a592a061-630c-0410-9148-cb99ea01b6c8
Basically, insets in cut stack do not have a buffer, and therefore cannot
acess to buffer parameters. What is annoying here is that acceptChanges
requires this buffer params only to be able to read a font in moveItem,
in order to read the buffer language, and I doubt this is really needed...
Another change in this patch is that Inset::getLayout now returns a
plainLayout when the inset does not have a buffer_. This fixes a remaining
crash where dEPM reads isFreeSpacing() for an inset in the clipboard, but
this looks like a fragile situation. And it will not do the right thing when
doing depm in a freespacing inset.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@30605 a592a061-630c-0410-9148-cb99ea01b6c8
is commented out, so that the documentclass is queried every time instead of
using the layout_ cache. For now I have kept the setLayout calls, but they are
inoperant.
Other changes:
* remove non-const usePlainLayout methods
* move InsetCollapsable::allowSpellCheck and allowMultiPar to InsetText
* move InsetCollapsable::isFreespacing and forceLTR to Inset
Freespacing support could be moved to insettext, but I have to check who
uses it.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@30549 a592a061-630c-0410-9148-cb99ea01b6c8
- InsetTabular.cpp: write the alignment as last features (to match the existing tex2lyx routines)
- InsetTabular.h: fix indexes
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@30482 a592a061-630c-0410-9148-cb99ea01b6c8
- GUI support for table alignment
(all comments to the polished layout of the table dialog welcome)
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@30477 a592a061-630c-0410-9148-cb99ea01b6c8
* Remove the EDITABLE enum,
* add functions hasSettings() for all insets.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@29375 a592a061-630c-0410-9148-cb99ea01b6c8
* src/Inset.h:
- new member content Alignment that indicates whether the content
of text insets should be displayed with a specific alignment
* src/TextMetrics.cpp:
- handle inset's contentAlignment
* src/insets/InsetTabular.{cpp,h}:
- set contentAlignment for tabular cells.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@26380 a592a061-630c-0410-9148-cb99ea01b6c8
Introduce OutputParams::inTableCell, to track when we are in a table cell.
Use this information to output \newline rather than \\ when in one.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@26349 a592a061-630c-0410-9148-cb99ea01b6c8
cur.inset() returns InsetTabular as the inset the cursor is in, not InsetTableCell.
It still does that, but now we return the right thing.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@26098 a592a061-630c-0410-9148-cb99ea01b6c8
- make neverIndent() non-virtual and const, fixing bug 4641
- also make neverIndent(), usePlainLayout(), forcePlainLayout() and
allowParagraphCustomization() private.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@25802 a592a061-630c-0410-9148-cb99ea01b6c8
please check your favourite insets, I am sure I broke _something_...
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@24006 a592a061-630c-0410-9148-cb99ea01b6c8
* add to toolbar + icon
* update border icons to match in size
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@23846 a592a061-630c-0410-9148-cb99ea01b6c8
- gets rid of the M_TOGGLE_LINE_... functions
- allows arbitrary clines without multicol
- sets arbitrary vertical lines through multicol
- drop row/col line properties, everything is now stored at the cell level
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@23812 a592a061-630c-0410-9148-cb99ea01b6c8
"*supported" methods maybe should be merged with a bit-enum as return value.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@23776 a592a061-630c-0410-9148-cb99ea01b6c8
s/rowstruct/RowData/g
s/columnstruct/ColumnData/g
closer to the current naming convention.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@23290 a592a061-630c-0410-9148-cb99ea01b6c8
from the one posted to the list.
The basic idea has two parts. First, we hard code an "empty layout"
(called PlainLayout, for want of a better name) in TextClass and read it
before doing anything else. It can therefore be customized by classes,
if they want---say, to make it left-aligned. Second, InsetText's are
divided into three types: (i) normal ones, that use the "default" layout
defined by the text class; (ii) highly restrictive ones, such as ERT and
(not quite an inset) table cells, which demand the empty layout; (iii)
middling ones, which default to an empty layout and use the empty layout
in place of the default. (This is so we don't get the same problem we
had with ERT in e.g. footnotes.) The type of inset is signaled by new
methods InsetText::forceEmptyLayout() and InsetText::useEmptyLayout().
(The latter might better be called: useEmptyLayoutInsteadOfDefault(),
but that's silly.) The old InsetText::forceDefaultParagraphs() has been
split into these, plus a new method InsetText::allowParagraphCustomization().
A lot of the changes just adapt to this change.
The other big change is in GuiToolbar: We want to show LyXDefault and
the "default" layout only when they're active.
There are a handful of places where I'm not entirely sure whether we
should be using forceEmptyLayout or !allowParagraphCustomization() or
both. The InsetCaption is one of these. These places, and some others,
are marked with FIXMEs, so I'd appreciate it if people would search
through the patch and let me know whether these need changing. If they
don't, the FIXMEs can be deleted.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@22966 a592a061-630c-0410-9148-cb99ea01b6c8
* DocIterator as MacroPosition
* Iterative search for macro in scope until a visible one is found.
This include the ability to resolve macro inside nested text insets.
* Speed up macro lookups by factor 2: only getMacro(name) call, no
further hasMacro(name) call before
* Both way child/master support
* Correct macro scope for multi-paragraph environments
* Correct macro scope for multi-depth-paragraphs
* Buffer::updateMacros made const
* Update macros when loaded (of master and child)
* Do not remove too many braces when unfolding a macro. This could
lead to a data loss because the relationship between arguments of
macros can be mixed up if nested macros are unfold at once.
* Reduce dependencies to MetricsInfo in MathMacro
* Update macros when needed. Normally it's done just before doing
metrics. But in cases without a brace around some constructs (like
\left(bla\right)) there is some help needed.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@22241 a592a061-630c-0410-9148-cb99ea01b6c8
