http://bugzilla.lyx.org/show_bug.cgi?id=3288
This is recommended by Qt:
Qt has caught an exception thrown from an event handler. Throwing
exceptions from an event handler is not supported in Qt. You must
reimplement QApplication::notify() and catch all exceptions there.
* GuiApplication::notify(): reimplemented from QApplication::notify().
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@17688 a592a061-630c-0410-9148-cb99ea01b6c8
* Painter:
- preeditText(), dashedUnderline(): new methods for CJK support.
* GuiWorkArea:
- inputMethodQuery(): new Qt inherited method for proper CJK support.
- inputMethodEvent(): now properly take care of input methods.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@17671 a592a061-630c-0410-9148-cb99ea01b6c8
again (bug 3304)
* src/intl.C
(Intl::initKeyMapper): Don't set the char set of trans anymore
* src/chset.[Ch]: delete, no longer needed
* lib/kbd/*.cdef: ditto
* src/lyxrc.[Ch]: remove RC_SCREEN_FONT_ENCODING and font_norm,
these are no longer needed
* src/lyxfunc.C: adapt to lyxrc changes
* src/Makefile.am: remove deleted files
* lib/Makefile.am: ditto
* development/scons/scons_manifest.py: ditto
* src/text3.C
(LyXText::dispatch): reenable the kmap mechanism
* src/trans_mgr.[Ch]
(TransManager::setCharset): remove, no longer needed
(TransManager::insert): remove, since it would be identical to
insertVerbatim now
(TransManager::insertVerbatim): rename to insert
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@17665 a592a061-630c-0410-9148-cb99ea01b6c8
This is purely mechanical, and touches only code that is currently not active.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@17657 a592a061-630c-0410-9148-cb99ea01b6c8
* src/text.C (breakParagraph): setCursor does not set current_font when
applied to a CursorSlice (fixes bug 3143)
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@17654 a592a061-630c-0410-9148-cb99ea01b6c8
Problem was that SIGNAL itemSelectionChanged was not connected to anything.
* QRefDialog::selectionChanged(): new slot for itemSelectionChanged signal.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@17615 a592a061-630c-0410-9148-cb99ea01b6c8
"View" button in TeX information dialog not enabled when file is selected with the keyboard. Problem was that SIGNAL itemSelectionChanged was not connected to anything. Also made some minor stylistic changes to the code.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@17614 a592a061-630c-0410-9148-cb99ea01b6c8
The crash happens on alt+up and alt+down if the position of the cursor
in the moved paragraph is beyond the length of the target paragraph.
To avoid it the Position of the iterators for the target paragraph must
be corrected. I set it to 0 as i assume it is not really used.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@17613 a592a061-630c-0410-9148-cb99ea01b6c8
breakParagraph seems to be called five times: in buffer.C, by
insertStringAsLines; and in text3.C, for LFUN_BREAK_PARAGRAPH,
LFUN_BREAK_PARAGRAPH_KEEP_LAYOUT, LFUN_BREAK_PARAGRAPH_SKIP (which
itself calls LFUN_BREAK_PARAGRAPH if a paragraph will be broken), and
for LFUN_FLOAT_LIST. My sense was that the KEEP_LAYOUT version maybe
shouldn't reset the text style. That's why I put it where I did. But I
doubt it matters very much, and I had it in breakParagraph myself at one
point.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@17612 a592a061-630c-0410-9148-cb99ea01b6c8
There is a user visible change with this commit: For text insets, the button stays "highlighted" as long as the mouse cursor is within the inset but not within a nested inset. Formerly the button was highlighted only when hovered. This new behaviour is better because we can now imagine funkier behaviour like inset color background change when hovered. Also the small math pink corners can be adapted to react to mouse hover in the future. Ideally we should also "highlight" the button when entering the inset via the keyboard or when the keyboard cursor is just before the inset (because we can then use Ctrl-i).
* BufferView:
- getCoveringInset(): new method.
- workAreaDispatch(): use getCoveringInset() instead of LyXText::checkInsetHit()
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@17610 a592a061-630c-0410-9148-cb99ea01b6c8
* src/support/unicode.C (convert): do not forget to reset lyxerr to
std::dec type of output.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@17609 a592a061-630c-0410-9148-cb99ea01b6c8
* src/mathed/InsetMathScript.C
(InsetMathScript::dy01): Make sure that the subscript is placed
not higher than when it appears alone.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@17602 a592a061-630c-0410-9148-cb99ea01b6c8
- whitespace. I forgot to save the changes before committing :-(
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@17595 a592a061-630c-0410-9148-cb99ea01b6c8
- some further refinement (and cleanup) of the triple click behaviour,
from Richard G. Heck.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@17594 a592a061-630c-0410-9148-cb99ea01b6c8
The string representation of math data stored in an undo could not be
read back. Now we store the math directly and do not convert to and from
a string.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@17591 a592a061-630c-0410-9148-cb99ea01b6c8
http://bugzilla.lyx.org/show_bug.cgi?id=3144
The problem was that we set the cursor even for mouse hover event.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@17589 a592a061-630c-0410-9148-cb99ea01b6c8
- reimplement doubleClickTimeout() from the qt3 frontend
in order to get triple clicking working (bug 3272).
This is just an emultation of triple clicking, since qt does not have
a mouseTripleClickEvent()
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@17588 a592a061-630c-0410-9148-cb99ea01b6c8
* src/frontends/qt4/ui/BulletsUi.ui:
- assure that six columns of bullets are displayed in the widget
(fix bug 3147).
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@17584 a592a061-630c-0410-9148-cb99ea01b6c8
This changes the semantics of isOK() and operator(), comments from Bernhard below:
With the old version of lyxlex it was _impossible_ to check whether reading an integer, float, ... succeeded or not. The current solution to check for is.bad() in some cases and in other cases use is.good() does not give the desired information. Moreover the result of is.bad() depends on the stl implementation and behaves different for linux and windows.
the bug was introduced by the patch that fixed the bug that crashed lyx when "inset-insert ert" was executed from the command buffer.
The lexer has the method isOK() which reflects the status of the stream is.
The operators void* and ! are not really well defined (they depend on the value of is.bad()). What is missing is a test if the last reading operation was successful and thus the returned value is valid.
That's what i implemented in this patch.
The new rule for using the lexer:
if you want to know if the lexer still has data to read (either from the stream or from the pushed token) then use "lex.isOK()".
If you want to test if the last reading operation was successful then use eg. "if (lex) {...}" or unsuccessful then use eg. "if (!lex) {...}"
an example:
int readParam(LyxLex &lex) {
int param = 1; // default value
if (lex.isOK()) { // the lexer has data to read
int p; // temporary variable
lex >> p;
if (lex) param = p; // only use the input if the reading operation was successful
}
return param;
}
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@17569 a592a061-630c-0410-9148-cb99ea01b6c8
support.
LyXRC::font_norm stays for now, since it is still used for the kbmap stuff.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@17566 a592a061-630c-0410-9148-cb99ea01b6c8
* src/mathed/MathData.C
(MathArray::metrics): Explicitly initialize kerning_ as it may
contain random data when the nucleus is an empty MathFont inset.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@17560 a592a061-630c-0410-9148-cb99ea01b6c8
- add flags for debug/release/profile
- also build qt4 as one file with gcc
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@17558 a592a061-630c-0410-9148-cb99ea01b6c8
* src/buffer.C
(Buffer::makeLaTeXFile): Use runparams.encoding to be consistent
* src/insets/insetinclude.C
(InsetInclude::latex): Change runparams.encoding to the encoding of
the child document for makeLateXFile
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@17555 a592a061-630c-0410-9148-cb99ea01b6c8
TODO: extract the latexHighlighter class into its own .[Ch] files.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@17553 a592a061-630c-0410-9148-cb99ea01b6c8
(RowPainter::paintHebrewComposeChar): Convert characters 0xf8 and
0xe3 from CP1255 to UCS4 encoding
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@17547 a592a061-630c-0410-9148-cb99ea01b6c8
Those arguments are not needed because update() will always look at what is currently selected and the info is there.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@17546 a592a061-630c-0410-9148-cb99ea01b6c8
- now simple citation insertion can be done with the keyboard only (enter key will close the dialog and insert the chosen key).
- now search also within bib entry information (very fast)
- new case sensitive option
- new regex option.
- QCitation: code simplified, some code went to ControlCitation.
- QCitationDialog: code simplified
- lots of polish in the dialogs...
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@17539 a592a061-630c-0410-9148-cb99ea01b6c8
* DockView.h: add the orientation option.
* QViewSource: now a model and a controller
* QViewSourceDialog: now only a simple QWidget.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@17538 a592a061-630c-0410-9148-cb99ea01b6c8
* transfer CiteEngine enum declaration to biblio.h
* delete unneeded CiteEngine_enum
* cite_engine is now cite_engine_ and is private.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@17537 a592a061-630c-0410-9148-cb99ea01b6c8
- replace unneeded dynamic_cast with static_cast
- fix citation info for normal BIBITEM entries.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@17535 a592a061-630c-0410-9148-cb99ea01b6c8
* src/encoding.C
(arabic_table): Delete (this was used for fonts in iso8859-6 encoding)
(arabic_table2): Rename to arabic_table and update code points to UCS4.
The old code points in this table where a custom encoding:
Some ASCII positions and some unused positions of the iso8859-6
encoding where used to encode the shaped forms. Example:
The character hamza was encoded with 0x41. The iso8859-6 encoding in
lib/encodings contained ithe value 0xfe80 at position 0x41 before
the transition to unicode => Change the value 0x41 to 0xfe80 in the
table.
This old custom encoding was needed because the transformed characters
needed to be transported through 8bit characters.
(Encodings::is_arabic_special): Change code points from iso8859-6 to UCS4
(Encodings::isComposeChar_arabic): Ditto
(Encodings::is_arabic): Ditto
(Encodings::transformChar): Always use arabic_table
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@17532 a592a061-630c-0410-9148-cb99ea01b6c8
* src/frontends/controllers/ControlCharacter.[Ch]
(reset_lang_) New flag (needed because the language is never
inherited)
* src/frontends/controllers/ControlCharacter.C
(ControlCharacter::getLanguage): Use reset_lang_
(ControlCharacter::setLanguage): Set reset_lang_ if needed
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@17526 a592a061-630c-0410-9148-cb99ea01b6c8
* src/rowpainter.C
(RowPainter::paintChars): Paint hebrew characters one at a time
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@17519 a592a061-630c-0410-9148-cb99ea01b6c8
* src/mathed/InsetMathScript.C
(isAlphaSymbol): New. Return true if nucleus is a letter or a
symbol whose type is mathord or mathalpha.
(InsetMathScript::dy01): Apply rule 18a accounting for nucleus type.
* src/mathed/MathData.C
(MathArray::metrics): Account for the fact that some fonts (eg.
mathcal) do not have a lower case x glyph.
* src/mathed/InsetMathSymbol.[Ch]
(InsetMathSymbol::isOrdAlpha): New. Return true if type of symbol
is mathord or mathalpha.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@17518 a592a061-630c-0410-9148-cb99ea01b6c8
* insetcite: call getEngine()
* bufferparams: move getEngine() here, and let it sense the
provides(natbib)
flag
* ControlBibtex, ControlCitation: correct getEngine() call
* biblio: remove old getEngine()
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@17505 a592a061-630c-0410-9148-cb99ea01b6c8
* src/mathed/MathSupport.[Ch]
(mathed_char_kerning): New. Compute right kerning for the given
font and character as the difference between right bearing and
logical width.
* src/mathed/InsetMathScript.[Ch]
(InsetMathScript::dx1, InsetMathScript::metrics): Account for
nucleus right kerning.
(InsetMathScript::nker): New. Return the nucleus right kerning
if positive, zero otherwise.
* src/mathed/MathData.[Ch]
(MathArray::metrics): Cache the nucleus right kerning value.
(MathArray::kerning): New. Return cached right kerning.
* src/mathed/InsetMathChar.[Ch]
(InsetMathChar::metrics): Cache the character right kerning.
(InsetMathChar::kerning): New. Return cached right kerning.
* src/mathed/InsetMath.h
(InsetMath::kerning): New virtual method.
* src/mathed/InsetMathSymbol.[Ch]
(InsetMathSymbol::metrics): Cache the symbol right kerning.
(InsetMathSymbol::kerning): New. Return cached right kerning.
* src/mathed/InsetMathFont.[Ch]
(InsetMathFont::kerning): New. Return cached right kerning.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@17497 a592a061-630c-0410-9148-cb99ea01b6c8
* src/LaTeX.C
(exists): New helper: test for existance of file with possibly
invalid filename
(insertIfExists): Use exists() instead of fs::native and fs::exists()
(handleFoundFile): Ditto
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@17485 a592a061-630c-0410-9148-cb99ea01b6c8
* src/mathed/InsetMathGrid.[Ch]
(InsetMathGrid::allow_pagebreak_): New member
* src/mathed/InsetMathGrid.C
(InsetMathGrid::eolString): Output \\* if allow_pagebreak_ is false
* src/mathed/MathParser.C
(addRow): Set allow_pagebreak_ in rowinfo if needed
(Parser::parse1): Parse '\\*' correctly
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@17484 a592a061-630c-0410-9148-cb99ea01b6c8
* src/mathed/InsetMathScript.[Ch]
(InsetMathScript::dy01): new, jointly account for both superscript
and subscript according to the rules in Appendix G of the TeXbook.
(InsetMathScript::dy0, InsetMathScript::dy1): set ascent and descent
values using dy01 for non-limits super/subscripts.
(InsetMathScript::metrics): account for the new super/subscript
placement rules when setting ascent and descent values.
* src/mathed/MathData.[Ch]
(MathArray::metrics): cache parameters needed for super/subscript
placement. When nucleus is not empty, set its ascent value to zero
such that it is correctly computed later, otherwise ascent values
less than that of an 'I' are not reported.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@17471 a592a061-630c-0410-9148-cb99ea01b6c8
* src/insets/insetcaption.C
(InsetCaption::latex): Copy back encoding to runparams_in
* src/insets/insetfoot.C
(InsetFoot::latex): ditto
* src/insets/insetnote.C
(InsetNote::latex): ditto
* src/exporter.C
(Exporter::Export): Create runparams with document encoding
* src/converter.C
(bool Converters::convert): ditto
* src/buffer.C
(Buffer::writeLaTeXSource): Copy back encoding to runparams_in
(Buffer::runChktex): Create runparams with document encoding
(Buffer::changeRefsIfUnique): ditto
* src/outputparams.[Ch]
(encoding): New member
* src/lyxfont.C
(LyXFont::latexWriteStartChanges): Don't switch the encoding anymore.
This is now done in Paragraph::simpleTeXOnePar.
(LyXFont::latexWriteEndChanges): Ditto
* src/output_latex.C
(TeXOnePar): Ditto
* src/paragraph.C
(Paragraph::simpleTeXOnePar): Switch the encoding between font
changes if needed.
* All other files: Adjust to the changes above
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@17470 a592a061-630c-0410-9148-cb99ea01b6c8
"Include" was for good reason the default method but not the first item in the dropdown list.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@17467 a592a061-630c-0410-9148-cb99ea01b6c8
* TocBackend
- addType(), types_, types(): deleted.
* ControlToc
- tocs(): new
- selectedType(): access to selected_type_
- initialiseParams(): transfer code from QToc::update() and look for selected type.
- getTypes(), getContents(): deleted
* QToc: do not maintain current type. Get the info from the View.
- setTocModel(): deleted
* TocWidget: always pass the currently selected type to the model/controller.
- setTocModel(): new slot.
- updateGui(): transfer code to setTocModel().
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@17455 a592a061-630c-0410-9148-cb99ea01b6c8
(handleFoundFile): Don't strip off " permanently
(handleFoundFile): Fix another case of embedded 0
(LaTeX::deplog): Small simplification
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@17454 a592a061-630c-0410-9148-cb99ea01b6c8
(handleFoundFile): Don't embed a 0 character in a string
(handleFoundFile): Don't call fs::exists without an fs::native check
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@17452 a592a061-630c-0410-9148-cb99ea01b6c8
- consider that paths with spaces might be enclosed in quotation marks
(partial fix for bug 3172).
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@17451 a592a061-630c-0410-9148-cb99ea01b6c8
steps to reproduce:
- create a new document
- change the document class to article (AMS)
- change the current layout to theorem, definition, proposition, ....
- try to write something -> boom
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@17449 a592a061-630c-0410-9148-cb99ea01b6c8
src/support/filetools.C
(makeDisplayPath): do not shorten path when it is the libdir one.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@17442 a592a061-630c-0410-9148-cb99ea01b6c8
(Paragraph::Pimpl::simpleTeXSpecialChars): Get rid of the 'font'
argument, since the caller ensures that it is equal to 'running_font'.
* src/paragraph.C
(Paragraph::simpleTeXOnePar): Adjust to change above
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@17437 a592a061-630c-0410-9148-cb99ea01b6c8
* src/LaTeX.C
(insertIfExists): Instead of catching all fs exceptions, test for a
valid filename before constructing a fs::path. This gets rid of the
exceptions because of invalid names, but does still allow other
expcetions to be thrown (e.g. because of file system problems).
(handleFoundFile): ditto
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@17424 a592a061-630c-0410-9148-cb99ea01b6c8
* src/output_latex.C
(TeXEnvironment): Rename language variables to make it very clear
that they denote the paragraph language, not the character language.
(TeXOnePar): ditto
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@17422 a592a061-630c-0410-9148-cb99ea01b6c8
- initialiseParams(): overload ControlCommand::initialiseParams() so that we can update the model at this point (QToc is the controller _and_ the model).
- update(): new
- updateBackend(): new protected method to update the TocBackend (called for the "Update" button).
* QToc:
- is now a QObject
- modelReset: new Qt signal to indicate a model reset to associated dialog(s).
- QToc(): avoid the duplicate update() call that will be done in the show command anyway.
* Dialogs.C
- use new TocWidget in a DockView.
* TocWidget.[Ch]: renamed from QTocDialog. This striped down widget is only a widget that connects to the 'QToc' model/controller.
* DockView.h: new template class that encapsulates a given Widget inside a DockWidget and presents a Dialog::View interface.
* QTocUi.ui:
- now is a simple Widget.
- rearrange the buttons a bit
- get rid of the unneeded close button.
- modify the shortcut to "Promote" to 'r' because of a clash with "Alt-p" number (we really need real, always valid, shortcuts for all outline action!)
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@17416 a592a061-630c-0410-9148-cb99ea01b6c8
- bug correction: don't forget to call updateLabels() to initialize the different backends.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@17415 a592a061-630c-0410-9148-cb99ea01b6c8
- update dialogs instead of hiding for dialogs that support that.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@17414 a592a061-630c-0410-9148-cb99ea01b6c8
* buffer.h:
- structureChanged(): new boost signal. I intend to use that also when a text is changed in a section or caption item.
* buffer_funcs.C:
- updateLabels(): emit Buffer::structureChanged() after TocBackend is updated.
- checkBufferStructure(): new method for updating the TocBackend if needed.
* LyXView:
- updateToc(): new slot for Buffer::structureChanged() signal.
* text.C:
- call checkBufferStructure() whenever text is added or erased.
* TocBackend.[Ch]:
- updateItem(): new method to update a specific item (called from checkBufferStructure()).
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@17413 a592a061-630c-0410-9148-cb99ea01b6c8
The problem was that pit is a reference to cur.pit() and was set to lastpit() + 1 before calling recordUndo(cur, ...). thus an invalid cursor position was stored in the undo buffer.
A side effect of the attached patch is that now the cursor keeps staying in the moved section header on undo (which is not the case in current trunk)
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@17410 a592a061-630c-0410-9148-cb99ea01b6c8
* src/LaTeX.C
(insertIfExists): Catch boost::filesystem exceptions, since they
are not errors in this context
(handleFoundFile): ditto
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@17405 a592a061-630c-0410-9148-cb99ea01b6c8
(lowercase): assert that input is pure ASCII
(uppercase): ditto
* src/support/lstrings.h
(lowercase): document that only ASCII input is allowed
(uppercase): ditto
* src/lyxfind.C
(stringSelected): Use compare_no_case (more efficient)
* src/MenuBackend.C: remove unused using directive
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@17393 a592a061-630c-0410-9148-cb99ea01b6c8
support directory, return as a relative path (enclosed in brackets)
* frontends/qt4/GuiView.C (updateTabs): use makeDisplayPath instead
of onlyFileName.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@17384 a592a061-630c-0410-9148-cb99ea01b6c8
* src/support/filename.C
(DocFileName::mangledFilenam): Use a whitelist of allowed characters
instead of an incomplete blacklist of disallowed ones
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@17378 a592a061-630c-0410-9148-cb99ea01b6c8
* tabular.C (TeXRow): do not forget to increment the row counter
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@17376 a592a061-630c-0410-9148-cb99ea01b6c8
Qt 4.2 for Mac menus (no merging is done for qt < 4.2 now).
* src/frontends/qt4/Action.C (Action): initialize menu role to NoRole
for qt >= 4.2.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@17373 a592a061-630c-0410-9148-cb99ea01b6c8
* src/output_plaintext.C
(writePlaintextParagraph): Use compare_ascii_no_case instead of
compare_no_case, since the strings to compare are pure ASCII anyway.
* src/frontends/qt4/QPrefsDialog.C
(setComboxFont): ditto
* src/MenuBackend.C
(Menu::checkShortcuts): ditto
* src/frontends/qt4/QLImage.C
(QLImage::loadableFormats): Use ascii_lowercase instead of lowercase
since the input is pure ASCII anyway.
* src/tex2lyx/text.C
(splitLatexLength): ditto
* src/support/lstrings.[Ch]
(compare_no_case): Get rid of both std::string variants
(lowercase): Get rid of std::string variant
(uppercase): Change std::string variant to docstring
* src/support/tests/regfiles/lstrings: Add new expected output
* src/support/tests/lstrings.C: Add tests for docstring functions
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@17371 a592a061-630c-0410-9148-cb99ea01b6c8
* FontMetrics.h: only one string width() method.
* Painter.h: only one text() method.
* all other files: adapt to above API change.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@17362 a592a061-630c-0410-9148-cb99ea01b6c8
reference to lyx::utf8ToUcs4.
I did not fix this since it is an interface violation that should be fixed
otherwise.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@17358 a592a061-630c-0410-9148-cb99ea01b6c8
* src/support/lstrings.C
(uppercase): Use qt instead of non working libc/home grown solution
(lowercase): ditto
(local_lowercase): Use qt instead of libc tolower for ucs4 chars
* src/support/qstring_helpers.C
(qstring_to_ucs4): Use qchar_to_ucs4 because of the assertion
* src/support/lstrings.h: Add some documentation
* src/support/qstring_helpers.h
(is_utf16): New function: Tests whether an ucs4 character is also a
valid utf16 character
(qchar_to_ucs4): Assert on is_utf16()
(ucs4_to_qchar): Replace old assertion with better is_utf16()
* src/support/textutils.h
(isLetterChar): Delete non-working implementation
(isPrintable): Ditto
(isPrintableNonspace): Ditto
(isDigit):
* src/support/textutils.C: New file, contains new implementations
using qt of the functions in textutils.h
* src/support/Makefile.am: Add textutils.C
* development/scons/scons_manifest.py: ditto
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@17354 a592a061-630c-0410-9148-cb99ea01b6c8
What I did:
* move xx_foo.ext to xx/foo.ext
* update Makefile.am to make install work
* minimally update scons_manifest.py (I'd be surprised to see it
work).
* update i18nLibFileSearch to use the new naming scheme, and keep
temporarily some code that checks the old method.
* update image paths in .lyx files
* update name of files (examples in tutorial, for ex.) in lyx files
What is definitely broken:
* cmake (did not touch it)
* TOC files (I am not sure how the code works)
I would be surprised if nothing else was wrong.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@17343 a592a061-630c-0410-9148-cb99ea01b6c8
(makeLatexName): Exclude ", otherwise we would trigger the same
problem of unbalanced quotes as in bug 3266
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@17336 a592a061-630c-0410-9148-cb99ea01b6c8
* src/TextMetrics.C
(TextMetrics::setHeightOfRow): correctly account for sectioning
environments in order to add the topsep space before them.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@17335 a592a061-630c-0410-9148-cb99ea01b6c8
* src/support/filetools.C
(makeLatexName): Don't set the 8th bit of characters to 0.
This is not needed anymore, since we don't use isalpha() anymore,
but a whitelist of allowed characters.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@17331 a592a061-630c-0410-9148-cb99ea01b6c8
method is never invoked (and tell why)
* src/mathed/InsetMathFormulaMacro.C:
* src/mathed/InsetMathHull.C: plaintext(): fix return value
(= number of output characters)
* src/mathed/InsetMathFormulaMacro.h
* src/mathed/InsetMathHull.h: WS changes
* src/mathed/InsetMathDim.C: implement plaintext() for math macros
and add a FIXME that this code shouldn't needed!
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@17319 a592a061-630c-0410-9148-cb99ea01b6c8
(InsetBox::validate): Don't require the calc package anymore for
pure minipages (as it was done in 1.3.x)
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@17312 a592a061-630c-0410-9148-cb99ea01b6c8
* src/frontends/Clipboard.h
(empty): Clarify documentation
* src/frontends/qt4/GuiClipboard.C
(GuiClipboard::empty): Consider also the LyX version, since the text
version is empty if there is only one inset in the clipboard.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@17297 a592a061-630c-0410-9148-cb99ea01b6c8
(copySelectionToStack): whitespace
(copySelection): Avoid possibly expensive conversion if we are not
debugging
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@17295 a592a061-630c-0410-9148-cb99ea01b6c8
Extend this to some other cases by me.
* src/insets/insetert.C
(void InsetERTMailer::string2params): Test for lex.isOK rather than
lex, since the latter is also true if there was nothing to read.
* src/insets/insetvspace.C
(InsetVSpace::read): ditto
(InsetVSpaceMailer::string2params): ditto
* src/insets/insetnote.C
(InsetNoteParams::read): ditto
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@17284 a592a061-630c-0410-9148-cb99ea01b6c8
* src/lyxtextclasslist.C
(LyXTextClassList::addTextClass): Use addName rather than manual
path construction.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@17282 a592a061-630c-0410-9148-cb99ea01b6c8
(setLabel): Only use the name of float and wide insets to set the label
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@17280 a592a061-630c-0410-9148-cb99ea01b6c8
* insetbase.h: introduce new enum PLAINTEXT_NEWLINE and use
it instead of runparams.linelen for plaintex() return values
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@17275 a592a061-630c-0410-9148-cb99ea01b6c8
* src/insets/insetoptarg.C: add comment that we do not output anything
for plaintext output INTENTIONALLY
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@17244 a592a061-630c-0410-9148-cb99ea01b6c8
* src/insets/ExternalSupport.C
(doSubstitution): redo the substitution with use_latex_path == false
for the filename argument of $$Contents, since the original
substitution might have been done with use_latex_path == true, and
that can lead to escaped filenames that are only valid for TeX.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@17242 a592a061-630c-0410-9148-cb99ea01b6c8
* src/LaTeX.C:
- (deplog): fix and refine parsing of file names.
- (handleFoundFile): handle files with spaces in their
name/path correctly
- (checkLinebreak): new helper function for deplog.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@17240 a592a061-630c-0410-9148-cb99ea01b6c8
* src/encoding.C
(Encoding::validate): Add the preamble stuff even if c can be encoded
in this encoding, since the inputenc package only maps the code point
c to a command, it does not make this command available.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@17239 a592a061-630c-0410-9148-cb99ea01b6c8
a paragraph if the previous line exceeds runparams.linelen
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@17233 a592a061-630c-0410-9148-cb99ea01b6c8
* src/insets/ExternalSupport.C
(updateExternal): Add new dryrun flag and only record updated files
for the exporter if that flag is false
(writeExternal): Call updateExternal also if dryrun is true and the
product contains the $$Contents placeholder. In this case we need to
run the conversion(s) even in dryrun mode, because we would not
output the right stuff to the .tex file otherwise.
* src/insets/ExternalSupport.[Ch]
(writeExternal): rename external_in_comment flag to dryrun
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@17204 a592a061-630c-0410-9148-cb99ea01b6c8
(Exporter::Export): Remove hardcoded check for lyx backend.
Use the shortest converter path instead, that is more flexible and
always correct.
* lib/configure.py: Add new formats and converters for importing and
exporting files from CJK LyX.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@17202 a592a061-630c-0410-9148-cb99ea01b6c8
a word in front of an inset; make sensible use of plaintext()
return value (IMHO totally broken before)
* insets/insetfoot.[Ch]: add plaintext()
* insets/insethfill.[Ch]: adjust plaintext(); make the
number of characters determinitic; minor header cleanup
* insets/insetbase.h: add comment on return value
of plaintext() - before its meaning was unclear
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@17200 a592a061-630c-0410-9148-cb99ea01b6c8
* QDialogView.h:
- QDialogView::forms() now requires a QWidget instead of a QDialog. This will allow us to use DockWidget in the future.
- QView class code simplification: implement inline instead of repeating in the same file.
- QView::forms() now returns the real object.
- QController class code simplification: implement inline instead of repeating in the same file.
* QDocumentDialog::update(): renamed to updateParams() to avoid clash with QWidget::update()
* QPrefsDialog::update(): renamed to updateRc() to avoid clash with QWidget::update()
* QTexinfoDialog::update(): now public so that it can be used in QDialogView.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@17195 a592a061-630c-0410-9148-cb99ea01b6c8
* src/insets/ExternalSupport.C
(updateExternal): Avoid computing crc of a directory as this leads
to a crash on Cygwin.
* lib/configure.py:
Use a python script to get the current date in order to avoid
a stalling condition with the date command on Win32.
* lib/scripts/date.py:
New python script.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@17168 a592a061-630c-0410-9148-cb99ea01b6c8
http://bugzilla.lyx.org/show_bug.cgi?id=3225
* QIndexDialog:
- QIndexDialog(): setFocusProxy() to the QLineEdit
- show(): deleted.
* QDialogView::show(): also setFocus() when raising or showing a window.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@17166 a592a061-630c-0410-9148-cb99ea01b6c8
