- column and row count,
- tabular width and method that goes with it
- method declaration without implementation: void delete_column(col_type)
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@20032 a592a061-630c-0410-9148-cb99ea01b6c8
That makes another simplification both possible and desirable. For some reason, whenever you change the Document Class combobox in Document Settings, LyX tries to read whatever you choose _before_ you try to hit "Apply". Why? I see no good reason. You get the warning earlier that way, but maybe you weren't going to try to load it anyway and were going to change your mind. So I have removed that behavior, in which case you'll get the warning when you try to apply the parameters. This means we can also remove ControlDocument::loadTextclass().
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@19965 a592a061-630c-0410-9148-cb99ea01b6c8
Design goal: Allow the use of layout "modules", which are to LaTeX packages as layout files are to LaTeX document classes. Thus, one could have a module that defined certain character styles, environments, commands, or what have you, and include it in various documents, each of which uses a different document class, without having to modify the layout files themselves. For example, a theorems.module could be used with article.layout to provide support for theorem-type environments, without having to modify article.layout itself, and the same module could be used with book.layout, etc.
This third patch just re-factors some code presently in QCitation*. (It also incorporates some bug fixes that have been committed separately.) We're going to use essentially the same set of widgets for choosing modules that is used for choosing citation keys, so we pull the controlling logic out into a new class, QSelectionManager. I did not make this a QWidget. That seemed to me to be overkill, and it would have made things much more complicated, I think...and I'm not all that experienced with Qt, anyway. Anyone who wants to do that is of course welcome.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@19860 a592a061-630c-0410-9148-cb99ea01b6c8
When opening another document, the following is printed to the console:
QWidget::repaint: recursive repaint detected.
QPixmap::operator=: Cannot assign to pixmap during painting
Painter must be active to set rendering hints
[repeated many times here]
Painter must be active to set rendering hints
QPainter:🔚 Painter is not active, aborted
QPixmap::operator=: Cannot assign to pixmap during painting
QPixmap::operator=: Cannot assign to pixmap during painting
currentTabChanged 1File/c/work/file2.lyx
and, when closing LyX:
QPixmap::operator=: Cannot assign to pixmap during painting
QPaintDevice: Cannot destroy paint device that is being painted. Be sure to QPainter::end() painters!
I suspect that solving these issues might also solve the missing close
tab button problem.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@19783 a592a061-630c-0410-9148-cb99ea01b6c8
* Toolbar::focusCommandBuffer(): new pure virtual method.
* Toolbars::display(): now return the address of the found toolbar.
* GuiView: get rid of command_buffer_, transferred to QLToolbar.
* QCommandBuffer: replace focus_command with setFocusProxy on edit_;
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@19767 a592a061-630c-0410-9148-cb99ea01b6c8
Design goal: Allow the use of layout "modules", which are to LaTeX packages as layout files are to LaTeX document classes. Thus, one could have a module that defined certain character styles, environments, commands, or what have you, and include it in various documents, each of which uses a different document class, without having to modify the layout files themselves. For example, a theorems.module could be used with article.layout to provide support for theorem-type environments, without having to modify article.layout itself, and the same module could be used with book.layout, etc.
This first patch does some reworking of the infrastructrue. We need to distinguish between the TextClass that a particular document is using and the layout of that document, since modules, in particular, can modify the layout. The solution adopted here is to add a TextClass pointer to BufferParams, which will hold the layout. The layout itself is then constructed from the TextClass the document is using. At present, this is completely trivial, but that will change when modules are added.
The pointer in question is a boost::shared_ptr. This is needed because CutAndPaste saves a copy of the layout with each cut or copied selection. We cannot assume the selection vanishes when the document is closed, so there are two options: (i) keep a list of all the layouts that have ever been used by any document; (ii) used some kind of smart pointer. The latter seems preferable, as the former would waste memory. More importantly, the use of a smart pointer allows modules to be modified on disk and then reloaded while LyX is running, and it will eventually allow the same for layout files.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@19756 a592a061-630c-0410-9148-cb99ea01b6c8
* LyXView:
- getToolbars(): deleted.
- toolbars_: now protected. The goal is to transfer that to GuiView.
- openLayoutList(): new method. The core should not know how this list is displayed.
- showMiniBuffer(): new pure virtual method to show the mini-buffer.
- focus_command_buffer: deleted.
* GuiView:
- focus_command_widget(): deleted.
- showMiniBuffer(): implemented.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@19748 a592a061-630c-0410-9148-cb99ea01b6c8
* loadLyXFile::setBuffer(): get rid of a premature optimisation, we make sure that everything is properly drawn in any case.
* GuiView::setCurrentWorkArea(): make sure everything is updated if we don't change tab.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@19717 a592a061-630c-0410-9148-cb99ea01b6c8
* Buffer:
- get rid of cursor_ and anchor_
- ~Buffer(): update the labels of its master buffer before closing
- closing(): pass the Buffer address.
* BufferView():
- BufferView(): needs a valid Buffer (should be const in the future.
- most of the change is about removing all test of buffer_ nullity.
- resize(): deleted.
- setBuffer(): deleted.
* Application:
- newLyXView(): simplification
- updated design description in Application.h
* Gui/GuiImplementation: remove all WorkAreas and BufferView creation/Deletion. Workareas are directly handled by LyXView/GuiView and BufferView is created/delete by WorkArea.
* LyXView/GuiView: implement the new design
What is not working yet:
- the close tab button: it is implemented but does not show up.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@19686 a592a061-630c-0410-9148-cb99ea01b6c8
The changes are essentially of three types.
First, the std::maps previously used here for storing BibTeX data have become full-fledged classes and so what were previously just a bunch of functions have now become methods of these new classes. This leads to a lot of minor changes in other files, to adapt to the new signature. The changes in insets/ are mostly of this kind.
Second, there are some slightly more substantial changes in src/insets/InsetBibtex.cpp. We now store lists of the field names and entry types that have been used.
Finally, there are the changes to the citation UI. These are mostly straightforward, though adding the new functionality exposed some inadequacies in the previous code that also had to be fixed.
One other change: BibTeX keys are now docstring. This solves some Unicode issues.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@19657 a592a061-630c-0410-9148-cb99ea01b6c8
http://bugzilla.lyx.org/show_bug.cgi?id=4123
* GuiView:
- closeEvent(): set quitting=true only when quitting. I don't know why and how this was changed but it was clearly wrong.
- update_view_state_qt(): only update when focus is in. Make sure this is the current LyXView.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@19643 a592a061-630c-0410-9148-cb99ea01b6c8
that caused the bug, but it does.
Also fix some other UI bugs, relating to resets of the selection models. These
look gratuitous and cause problems in the current code.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@19530 a592a061-630c-0410-9148-cb99ea01b6c8
- reorganize the code to minimize indentation by returning early for special cases
- use a pixmap cache for word drawing. This can be disabled by setting USE_PIXMAP_CACHE to 0 at the top of QLPainter.cpp.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@19513 a592a061-630c-0410-9148-cb99ea01b6c8
in the view source panel
* Buffer.cpp (getSourceCode, writeLaTeXSource): fix sync between output and texrow
* frontends/controllers/ControlViewSource.{h,cpp} (getRows): new method to get the current selection in term of latex rows
* frontends/qt4/QViewSource.{h,cpp}: make a selection in the ViewSource widget
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@19503 a592a061-630c-0410-9148-cb99ea01b6c8
* development/MacOSX/Makefile.am: when installing, create bogus
language directories to allow translation through Qt.
* src/frontends/qt4/GuiApplication.cpp (MenuTranslator): new class,
redirects some Qt translation requests to gettext.
(GuiApplication): install the MenuTranslator.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@19354 a592a061-630c-0410-9148-cb99ea01b6c8
- new function getSortedColors
* src/frontends/qt4/QPrefs.cpp:
- use that to sort the colors (bug 2571)
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@19236 a592a061-630c-0410-9148-cb99ea01b6c8
* InsetTabular:
- remove the is_deleted_ boolean
- dispatch(): remove the call to updateDialog at the end
* ControlTabular::initialiseParams(): connect to the current tabular if found.
* QTabular::update_contents(): initialiseParams() each time.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@19112 a592a061-630c-0410-9148-cb99ea01b6c8
1) LyXFunc::lyx_view_ is not set to 0
2) quiting is not set to true.
This patch add safe guards when closing a view and/or exiting.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@19095 a592a061-630c-0410-9148-cb99ea01b6c8
* Layout.h:
- name_, obsoleted_by_, depends_on_ are now docstrings.
All other changes results from the above string -> docstring changes. In particular, we now try to translate the layout names only if possible (i.e. if they are ASCII only).
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@19042 a592a061-630c-0410-9148-cb99ea01b6c8
* src/support/docstring.{cpp,h}:
- rename normalize_kc to normalize_c and use normalization form C (instead of KC)
* src/callback.cpp:
* src/Trans.cpp:
* src/frontends/qt4/GuiClipboard.cpp:
* src/frontends/qt4/GuiSelection.cpp:
* lib/lyx2lyx/lyx_1_5.py:
- use normalization forms C and D instead of KC and KD.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@18991 a592a061-630c-0410-9148-cb99ea01b6c8
is that we distinguish between the "Default" alignment and whatever
that default happens to be: I.e., so far as the code goes, the UI now
distinguishes LYX_ALIGN_LAYOUT from LYX_ALIGN_WHATEVER, when WHATEVER
happens to be the default. So you can explicitly force, say, left-align,
and that will stick between document classes.
* src/Paragraph.cpp:
Don't output params if alignment is the default.
* src/ParagraphParameters.cpp
Treat LYX_ALIGN_LAYOUT as its own alignment.
* src/Text2.cpp
Treat LYX_ALIGN_LAYOUT as its own alignment, and force it to be accepted
as a possible alignment.
* src/frontends/controllers/ControlParagraph.{h,cpp}
New method haveMultiParSelection().
*src/frontends/qt4/QParagraph.{h,cpp}
*src/frontends/qt4/ui/ParagraphUi.ui
UI adjustments as mentioned.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@18922 a592a061-630c-0410-9148-cb99ea01b6c8
- use internal_path to prevent assert on windows (bug 3916).
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@18896 a592a061-630c-0410-9148-cb99ea01b6c8
* po/lyx_pot.py:
- new function external_l10n: parse external_templates and extract the relevant parts for translation.
* development/scons/SConstruct:
* po/Makefile.in.in:
- use external_l10n
* src/insets/InsetExternal.cpp:
* src/frontends/qt4/QExternal.cpp:
- make eveything translatable
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@18866 a592a061-630c-0410-9148-cb99ea01b6c8
checkbox has been changed to a radio button, so that other alignments
can be chosen without the user's having to uncheck "Default".
There was some disagreement about the interface here. See, for example,
this thread:
http://www.mail-archive.com/lyx-devel@lists.lyx.org/msg121328.html
For now, this will do.
The interface here is not fully functional. At present, if the Default
happens to be Justified, then checking Justified is simply equivalent to
checking Default. This is due to the behavior of Text::setParagraph(), and
it should be changed if this interface is retained.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@18860 a592a061-630c-0410-9148-cb99ea01b6c8
does not close the command completion popup. Moreover setFocus does
not focus the widget correctly, probably because the popup widget
behavior is different. An activateWindow solves the problem by
selecting the LyX view again as active window.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@18840 a592a061-630c-0410-9148-cb99ea01b6c8
the coordinate cache of the math inset is not valid and InsetMathNest
depends on that to compute the cursor position.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@18816 a592a061-630c-0410-9148-cb99ea01b6c8
IconPalette now subclasses QWidgetAction so that we can
insert them in QMenu (before we were painting ourselves)
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@18812 a592a061-630c-0410-9148-cb99ea01b6c8
* remove spacing in the layout of the tab bar and the central widget
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@18770 a592a061-630c-0410-9148-cb99ea01b6c8
this is already what we have; fixes a crash (bug 3793)
* src/frontends/controllers/ControlToc.h: make getGUIName private
* src/frontends/controllers/ControlToc.cpp (getGUIName): handle
correctly the lists of floats.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@18648 a592a061-630c-0410-9148-cb99ea01b6c8
bug is fixed in Qt an upper version bound should be added.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@18647 a592a061-630c-0410-9148-cb99ea01b6c8
* In the "Available" list, double clicking or hitting Enter adds a
citation. Hitting Ctrl-Enter adds the citation and closes the
dialog. Previously, Enter did what Ctrl-Enter now does if there
was no other citation already selected and double clicking would
close the dialog after adding the citation.
* In the "Selected" list, Delete and Backspace delete the
selection.
Ctrl-Delete and Ctrl-Backspace clear the whole list.
Thanks to Abdel, Andre, and Lars for comments and help.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@18633 a592a061-630c-0410-9148-cb99ea01b6c8
http://bugzilla.lyx.org/show_bug.cgi?id=3759
It also simplifies and fix the smallcaps case which was not correct WRT unicode. Even though I don't know if toUpper() means something in the non ucs2 range.
FYI, I used toqstr() to do the ucs4 -> ucs2 conversion when needed. This helper method works only with Qt >= 4.2.
* GuiFontMetrics::smallcapsWidth(): changed to work with single ucs4 characters.
* GuiFontMetrics::xxx(): make sure that font metrics works with characters not in the ucs2 range.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@18593 a592a061-630c-0410-9148-cb99ea01b6c8
* added Qt::Drawer flag to TOC
* reverted Jürgen's patch (i.e. the source view is docked below the text again),
wide drawers are not Mac-like (tm)
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@18557 a592a061-630c-0410-9148-cb99ea01b6c8
* src/Buffer.cpp:
- make view-source string translatable
* src/frontends/controllers/ControlToc.h:
- make getGuiName public
* src/frontends/qt4/TocWidget.cpp:
- use getGuiName for the combo.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@18505 a592a061-630c-0410-9148-cb99ea01b6c8
- adds a "toggle math toolbar" and "toggle table toolbar" buttons to the main toolbar
(i also moved "toggle toc" there)
- adds a "toggle math panels" button to the math toolbar
- reshuffles the Big Operators panel to avoid confusion with the sum icon on the math toolbar
- adds some icons
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@18478 a592a061-630c-0410-9148-cb99ea01b6c8
* src/insets/InsetListingsParams.cpp:
- complete list of languages/dialects
- fix some typos
- (validate): check for braces
* src/frontends/qt4/QListings.cpp:
- fix list of languages (not yet complete)
- make it possible to enter [dialect]language in the advanced widget
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@18451 a592a061-630c-0410-9148-cb99ea01b6c8
* src/frontends/qt4/QListings.cpp (validate_listings_params):
- care for the apply button as well.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@18444 a592a061-630c-0410-9148-cb99ea01b6c8
* src/frontends/qt4/QListings.cpp:
- make widget entries translatable
- clean up and shuffle around some code
* src/frontends/qt4/ui/ListingsUi.ui:
- set isEditable here, not in QListings.cpp
* src/frontends/qt4/QDocument.cpp:
* src/frontends/qt4/QInclude.cpp:
- make Listings strings translatable
Fix bug 3654 (by Bo Peng):
* src/frontends/qt4/QListings.h:
- new slot on_numberSideCO_currentIndexChanged
* src/frontends/qt4/QListings.cpp:
- use this slot and enable(disable the appropriate widgets
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@18432 a592a061-630c-0410-9148-cb99ea01b6c8
* Sqrt and Root draw their vertical horizontal line with a single line command to make them showup non-antialiased.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@18419 a592a061-630c-0410-9148-cb99ea01b6c8
Delete cached conversions if the converter changes.
* src/frontends/qt4/QPrefs.cpp
(PrefConverters::update_converter): delete cached files since the
new converter might create different ones
(PrefConverters::remove_converter): ditto
* src/support/convert.cpp
(unsigned long convert<unsigned long>): New template specialization
* src/ConverterCache.h
(ConverterCache::remove_all): New method, removes all cached
conversions of a particular converter
* src/ConverterCache.cpp
(CacheType): Also store source file format
(ConverterCache::Impl::readIndex): Handle files with spaces correctly
(ConverterCache::Impl::writeIndex): ditto
(various): adapt to changed CacheType
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@18378 a592a061-630c-0410-9148-cb99ea01b6c8
* TocWidget::select()
- Do not allow select ModelItem from the code for non-TOC types
- add a FIXME explaining the situation.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@18348 a592a061-630c-0410-9148-cb99ea01b6c8
* src/frontends/qt4/TocWidget.{cpp,h}:
- new member disconnectSelectionModel()
- (select): replace blockSignal() directives for tocTV selectionModel()
with disconnect (the above new function) and reconnect relevant signal
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@18338 a592a061-630c-0410-9148-cb99ea01b6c8
* ControlDocument::id(): new method returning the id of the current buffer.
* PreambleModule: new class for the preamble module. Handle everything preamble related, including memorizing the cursor position for each Buffer.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@18307 a592a061-630c-0410-9148-cb99ea01b6c8
In insert graphic window: canceling open dialog erases entry in text box). This bug is not Mac specific, but exist in Linux. (should exist in other OSes.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@18268 a592a061-630c-0410-9148-cb99ea01b6c8
Solution: Move the color initialization from the constructor to the update() method. I've read the mail from Richard (referenced in the source code) concerning this, but i don't understand why we should not move parts of the initialization the constructor does into the update method. With this changes the hack for fixing http://bugzilla.lyx.org/show_bug.cgi?id=3109 is not needed.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@18249 a592a061-630c-0410-9148-cb99ea01b6c8
Solution: Disable the alter button if no item is selected and add an additional test for a valid index.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@18247 a592a061-630c-0410-9148-cb99ea01b6c8
Solution: Add a test whether the color returned from the color dialog is valid.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@18245 a592a061-630c-0410-9148-cb99ea01b6c8
with skips.
Added helper method canIndent() to controller and appropriate logic to
QParagraph::update_contents().
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@18236 a592a061-630c-0410-9148-cb99ea01b6c8
* GuiApplication::event():
special case for FileOpen events: memorize the filenames if LyX is not properly started yet.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@18201 a592a061-630c-0410-9148-cb99ea01b6c8
* src/frontends/controllers/ControlCommandBuffer.{cpp,h}:
- new member hide()
* src/frontends/qt4QCommandEdit.{cpp,h}:
- new signal hidePressed(), emit it on M-x/Alt-x
* src/frontends/qt4/QCommandBuffer.{cpp,h}:
- new slot hideParent(), connected to QCommandEdit::hidePressed()
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@18081 a592a061-630c-0410-9148-cb99ea01b6c8
somewhat better layout; ideally, the whole dialog should be laid out in a grid,
but then qt insists on drawing the listwidgets much wider than the need to be.
The drawback of this approach is that the dialog cannot really be resized.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@17949 a592a061-630c-0410-9148-cb99ea01b6c8
some code is moved from QMath
to QDelimiterDialog and QMathMatrixDialog
for the rest pretty mechanical
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@17872 a592a061-630c-0410-9148-cb99ea01b6c8
add signal that provides action when triggered
* ToolbarBackend.[Ch]
add popupmenu and iconpallete item types
* QLToolbar.[Ch]
take care of popupmenu and iconpallete
* stdtoolbars.inc
add panels and menus (and move spellchecker to main ;-)
* functions.xpm
icon for function list
* iconpalette.[Ch]
new iconpanel that will replace old iconpalette,
als subclass of qmenu that updates parent toolbutton
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@17868 a592a061-630c-0410-9148-cb99ea01b6c8
toolbaritems, toolbar(info) and backend
stdtoolbars.inc now defines the toolbars inbetween
a ToolbarSet/End tag just as the menus
* the other files contain straightforward changes
because of the toolbarbackend refactoring
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@17867 a592a061-630c-0410-9148-cb99ea01b6c8
http://bugzilla.lyx.org/show_bug.cgi?id=3460
The problem was that the list_items map is ordered by key.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@17858 a592a061-630c-0410-9148-cb99ea01b6c8
* bigleft, bigright: move empty item from last to first to synchronize it with GUI representation
* fix_name(): add FIXME for Enrico
* updateTeXCode():
- move C-style string declaration.
- simplify empty string logic.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@17848 a592a061-630c-0410-9148-cb99ea01b6c8
* src/frontends/qt4/TocWidget.[Ch]:
- rename enableButtons to enableControls and include slider enabling/disabling
- only set slider if there is some content
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@17835 a592a061-630c-0410-9148-cb99ea01b6c8
http://bugzilla.lyx.org/show_bug.cgi?id=3450
* ControlMath
- new MathSymbol struct that summarize the symbol attributes (including font and fontcode)
* QDelimiterDialog:
- make use of the new MathSymbol for the ListWidget.
- store the latex name in the tooltip instead of lookup for it.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@17786 a592a061-630c-0410-9148-cb99ea01b6c8
options accepted by the current paragraph.
ui/QParagraphUi.ui
Changed combo box for alignment to radio buttons. Added
checkbox for default alignment.
QParagraphDialog.[Ch]
public:
void checkAlignmentRadioButtons();
void alignmentToRadioButtons(LyXAlignment);
LyXAlignment getAlignmentFromDialog();
private:
typedef std::map<LyXAlignment, QRadioButton *> QPRadioMap;
QPRadioMap radioMap;
protected Q_SLOTS:
void change_adaptor();
void enableLinespacingValue(int);
void on_alignDefaultCB_toggled(bool);
QParagraph.C
Rework apply() and update_contents() using new functions just
mentioned.
Thanks to Abdel for his help.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@17776 a592a061-630c-0410-9148-cb99ea01b6c8
* src/mathed/MathSupport.C:
add "slash" to the decoration table.
* src/mathed/InsetMathBig.C
(InsetMathBig::draw): don't remove backslash delimiter.
(InsetMathBig::isBigInsetDelim): add "\\" and "\slash" to
the delimiters table.
* src/frontends/qt4/QDelimiterDialog.C
(fix_name): return "\\" instead of "\backslash" as that now
works after the fixes above.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@17771 a592a061-630c-0410-9148-cb99ea01b6c8
* src/frontends/qt4/QDelimiterDialog.C
(fix_name): Return "|" instead of "\|" as this is equivalent to \Vert.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@17752 a592a061-630c-0410-9148-cb99ea01b6c8
http://bugzilla.lyx.org/show_bug.cgi?id=3413
* ui/QNomenclUi.ui
- description field: replace LineEdit with TexEdit
* QNomencl.C: take care of the \n <-> \\ conversion in the description field.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@17748 a592a061-630c-0410-9148-cb99ea01b6c8
* ControlMath.[Ch]
- mathSymbol(), texName(): new method for easy access of math symbols and associated TeX names
- latex_delimiters: allowed delimiters transferred from QDelimiterDialog.C
* QDelimiterDialog.C:
- makes use of the above.
- display the TeX code in a label instead of beside the symbol.
* QDelimiterUi.ui
- shrink it so that it could nicely fit in a DockWidget but this doesn't work, the dialog is too large!
- texCodeL: new label.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@17747 a592a061-630c-0410-9148-cb99ea01b6c8
Changed dialog and added routines to deal with an "auto" label
in cases where defaults are used.
ui/MarginsUi.ui: Changed labels for width and height to checkboxes. Removed connections.
checkwidgets.[Ch]: Extended checkedLineEdit routines to take a QWidget.
qt_helpers.[Ch]:
Added void lengthToWidgets(QLineEdit *, LengthCombo *, LyXLength const &, LyXLength::UNIT)
Added void lengthAutoToWidgets(QLineEdit *, LengthCombo *, LyXLength const &, LyXLength::UNIT)
Added void setAutoTextCB(QCheckBox *, QLineEdit *, LengthCombo *)
validators.[Ch]:
Added class LengthAutoValidator : public LengthValidator
Added class DoubleAutoValidator : public QDoubleValidator
QGraphicsDialog.[Ch]
Added virtual void setAutoText()
Added virtual void on_WidthCB_toggled(bool)
Added virtual void on_HeightCB_toggled(bool)
Used the new functions to set "auto" in default cases and toggle checkboxes as needed.
Set validator for scale.
Re-organized connect routines.
QGraphics.C:
Completely re-worked update_contents().
Significant changes to apply().
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@17735 a592a061-630c-0410-9148-cb99ea01b6c8
1) launch the dialog
2) select a delimiter in the left pane
3) Tab
4) select a delimiter in the right pane
5) Enter
So:
- Also enable the quick insertion while in the right pane
- Do not limit the quick insertion to matched key
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@17732 a592a061-630c-0410-9148-cb99ea01b6c8
- ListWidget instead of combo,
- matched delimiters on the same row,
- immediate insertion on "enter" or "double-click" if the 'match' option is checked.
- simplification of the code.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@17731 a592a061-630c-0410-9148-cb99ea01b6c8
Most of the change is about using the new private member delimiters_ instead of the "delim" table. Also, we don't display an icon when the delimiter is one character.
I did not manage to let the combos expand to the maximum.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@17727 a592a061-630c-0410-9148-cb99ea01b6c8
http://bugzilla.lyx.org/show_bug.cgi?id=3412
* QNomenclDialog::QNomenclDialog(): setting the focus proxy in the Description edit box.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@17719 a592a061-630c-0410-9148-cb99ea01b6c8
* ControlToc::update(): get rid of the pure virutal method.
* QToc::initialiseParams(): overload ControlToc method.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@17708 a592a061-630c-0410-9148-cb99ea01b6c8
keyboard input via kmap, clipboard and selection) to normalized form KC
(precomposed characters) since we don't support the decomposed form very
well.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@17702 a592a061-630c-0410-9148-cb99ea01b6c8
* src/frontends/qt4/QTabular.C: change "Block" to "Justified"
to avoid translation clash and to align with paragraph settings
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@17694 a592a061-630c-0410-9148-cb99ea01b6c8
http://bugzilla.lyx.org/show_bug.cgi?id=3288
This is recommended by Qt:
Qt has caught an exception thrown from an event handler. Throwing
exceptions from an event handler is not supported in Qt. You must
reimplement QApplication::notify() and catch all exceptions there.
* GuiApplication::notify(): reimplemented from QApplication::notify().
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@17688 a592a061-630c-0410-9148-cb99ea01b6c8
* Painter:
- preeditText(), dashedUnderline(): new methods for CJK support.
* GuiWorkArea:
- inputMethodQuery(): new Qt inherited method for proper CJK support.
- inputMethodEvent(): now properly take care of input methods.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@17671 a592a061-630c-0410-9148-cb99ea01b6c8
Problem was that SIGNAL itemSelectionChanged was not connected to anything.
* QRefDialog::selectionChanged(): new slot for itemSelectionChanged signal.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@17615 a592a061-630c-0410-9148-cb99ea01b6c8
"View" button in TeX information dialog not enabled when file is selected with the keyboard. Problem was that SIGNAL itemSelectionChanged was not connected to anything. Also made some minor stylistic changes to the code.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@17614 a592a061-630c-0410-9148-cb99ea01b6c8
- whitespace. I forgot to save the changes before committing :-(
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@17595 a592a061-630c-0410-9148-cb99ea01b6c8
- some further refinement (and cleanup) of the triple click behaviour,
from Richard G. Heck.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@17594 a592a061-630c-0410-9148-cb99ea01b6c8
- reimplement doubleClickTimeout() from the qt3 frontend
in order to get triple clicking working (bug 3272).
This is just an emultation of triple clicking, since qt does not have
a mouseTripleClickEvent()
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@17588 a592a061-630c-0410-9148-cb99ea01b6c8
* src/frontends/qt4/ui/BulletsUi.ui:
- assure that six columns of bullets are displayed in the widget
(fix bug 3147).
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@17584 a592a061-630c-0410-9148-cb99ea01b6c8
- add flags for debug/release/profile
- also build qt4 as one file with gcc
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@17558 a592a061-630c-0410-9148-cb99ea01b6c8
TODO: extract the latexHighlighter class into its own .[Ch] files.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@17553 a592a061-630c-0410-9148-cb99ea01b6c8
Those arguments are not needed because update() will always look at what is currently selected and the info is there.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@17546 a592a061-630c-0410-9148-cb99ea01b6c8
- now simple citation insertion can be done with the keyboard only (enter key will close the dialog and insert the chosen key).
- now search also within bib entry information (very fast)
- new case sensitive option
- new regex option.
- QCitation: code simplified, some code went to ControlCitation.
- QCitationDialog: code simplified
- lots of polish in the dialogs...
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@17539 a592a061-630c-0410-9148-cb99ea01b6c8
* DockView.h: add the orientation option.
* QViewSource: now a model and a controller
* QViewSourceDialog: now only a simple QWidget.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@17538 a592a061-630c-0410-9148-cb99ea01b6c8
* transfer CiteEngine enum declaration to biblio.h
* delete unneeded CiteEngine_enum
* cite_engine is now cite_engine_ and is private.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@17537 a592a061-630c-0410-9148-cb99ea01b6c8
"Include" was for good reason the default method but not the first item in the dropdown list.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@17467 a592a061-630c-0410-9148-cb99ea01b6c8
* TocBackend
- addType(), types_, types(): deleted.
* ControlToc
- tocs(): new
- selectedType(): access to selected_type_
- initialiseParams(): transfer code from QToc::update() and look for selected type.
- getTypes(), getContents(): deleted
* QToc: do not maintain current type. Get the info from the View.
- setTocModel(): deleted
* TocWidget: always pass the currently selected type to the model/controller.
- setTocModel(): new slot.
- updateGui(): transfer code to setTocModel().
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@17455 a592a061-630c-0410-9148-cb99ea01b6c8
- initialiseParams(): overload ControlCommand::initialiseParams() so that we can update the model at this point (QToc is the controller _and_ the model).
- update(): new
- updateBackend(): new protected method to update the TocBackend (called for the "Update" button).
* QToc:
- is now a QObject
- modelReset: new Qt signal to indicate a model reset to associated dialog(s).
- QToc(): avoid the duplicate update() call that will be done in the show command anyway.
* Dialogs.C
- use new TocWidget in a DockView.
* TocWidget.[Ch]: renamed from QTocDialog. This striped down widget is only a widget that connects to the 'QToc' model/controller.
* DockView.h: new template class that encapsulates a given Widget inside a DockWidget and presents a Dialog::View interface.
* QTocUi.ui:
- now is a simple Widget.
- rearrange the buttons a bit
- get rid of the unneeded close button.
- modify the shortcut to "Promote" to 'r' because of a clash with "Alt-p" number (we really need real, always valid, shortcuts for all outline action!)
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@17416 a592a061-630c-0410-9148-cb99ea01b6c8
support directory, return as a relative path (enclosed in brackets)
* frontends/qt4/GuiView.C (updateTabs): use makeDisplayPath instead
of onlyFileName.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@17384 a592a061-630c-0410-9148-cb99ea01b6c8
Qt 4.2 for Mac menus (no merging is done for qt < 4.2 now).
* src/frontends/qt4/Action.C (Action): initialize menu role to NoRole
for qt >= 4.2.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@17373 a592a061-630c-0410-9148-cb99ea01b6c8
* src/output_plaintext.C
(writePlaintextParagraph): Use compare_ascii_no_case instead of
compare_no_case, since the strings to compare are pure ASCII anyway.
* src/frontends/qt4/QPrefsDialog.C
(setComboxFont): ditto
* src/MenuBackend.C
(Menu::checkShortcuts): ditto
* src/frontends/qt4/QLImage.C
(QLImage::loadableFormats): Use ascii_lowercase instead of lowercase
since the input is pure ASCII anyway.
* src/tex2lyx/text.C
(splitLatexLength): ditto
* src/support/lstrings.[Ch]
(compare_no_case): Get rid of both std::string variants
(lowercase): Get rid of std::string variant
(uppercase): Change std::string variant to docstring
* src/support/tests/regfiles/lstrings: Add new expected output
* src/support/tests/lstrings.C: Add tests for docstring functions
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@17371 a592a061-630c-0410-9148-cb99ea01b6c8
* FontMetrics.h: only one string width() method.
* Painter.h: only one text() method.
* all other files: adapt to above API change.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@17362 a592a061-630c-0410-9148-cb99ea01b6c8
* src/frontends/Clipboard.h
(empty): Clarify documentation
* src/frontends/qt4/GuiClipboard.C
(GuiClipboard::empty): Consider also the LyX version, since the text
version is empty if there is only one inset in the clipboard.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@17297 a592a061-630c-0410-9148-cb99ea01b6c8
* QDialogView.h:
- QDialogView::forms() now requires a QWidget instead of a QDialog. This will allow us to use DockWidget in the future.
- QView class code simplification: implement inline instead of repeating in the same file.
- QView::forms() now returns the real object.
- QController class code simplification: implement inline instead of repeating in the same file.
* QDocumentDialog::update(): renamed to updateParams() to avoid clash with QWidget::update()
* QPrefsDialog::update(): renamed to updateRc() to avoid clash with QWidget::update()
* QTexinfoDialog::update(): now public so that it can be used in QDialogView.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@17195 a592a061-630c-0410-9148-cb99ea01b6c8
http://bugzilla.lyx.org/show_bug.cgi?id=3225
* QIndexDialog:
- QIndexDialog(): setFocusProxy() to the QLineEdit
- show(): deleted.
* QDialogView::show(): also setFocus() when raising or showing a window.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@17166 a592a061-630c-0410-9148-cb99ea01b6c8
- fix bug 3147: Incorrect input field order in glossary dialog
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@17136 a592a061-630c-0410-9148-cb99ea01b6c8
* GuiWorkArea::inputMethodEvent(): process a keyPressEvent() for each character of the commitString().
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@17134 a592a061-630c-0410-9148-cb99ea01b6c8
* frontends/controllers/ControlChanges.C:
* frontends/controllers/ControlChanges.h: fix merge-changes dialog;
remove old cruft; strip interface down to what is really needed
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@17019 a592a061-630c-0410-9148-cb99ea01b6c8
* src/frontends/qt4/QLPainter.C
(QLPainter::text): Render the symbol whose codepoint is 0x00ad
through a one-column QTextLine in order to fool Qt, which displays
what it thinks is a soft-hyphen only when occurring at a line-break.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@16997 a592a061-630c-0410-9148-cb99ea01b6c8
* src/buffer.C
(Buffer::readString): Tell readFile that we do not have a file
(Buffer::readString): readFile(name) returns a bool, not an enum
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@16931 a592a061-630c-0410-9148-cb99ea01b6c8
- fix false toolbar positioning for qt < 4.2.2
- only add ToolBarBreak if the toolbar exceeds the line
(not perfect yet)
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@16927 a592a061-630c-0410-9148-cb99ea01b6c8
* QErrorListDialog::showEvent(): new method. Set the error on the first item.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@16848 a592a061-630c-0410-9148-cb99ea01b6c8
This may make a difference when char_type is signed.
* src/frontends/LyXKeySym.h
(getUCSEncoded): change return type from size_t to char_type
* src/frontends/qt4/QLyXKeySym.[Ch]
(getUCSEncoded): ditto
* src/lyxfunc.C
(LyXFunc::processKeySym): adjust to the above and add a FIXME since
this is strange code that looks like it was not intended to do what
it does.
* src/lyxfunc.h
(encoded_last_key): Correct documentation
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@16833 a592a061-630c-0410-9148-cb99ea01b6c8
* src/LaTeX.C
(LaTeX::deplog): Assume that filenames in log files are stored in
the file system encoding
* src/frontends/qt4/qt_helpers.[Ch]
(internal_path): delete
* src/frontends/qt4/QGraphics.C: Adjust to change above
* src/frontends/qt4/QPrefsDialog.C: ditto
* src/frontends/qt4/QExternal.C: ditto
* src/frontends/qt4/QInclude.C: ditto
* src/support/os.h: Document the encoding of filename arguments
* src/support/os_win32.h: ditto
* src/support/filetools.C
(findtexfile): Convert filename from file system encoding
* src/support/os_win32.C: Convert filenames from utf8 to file system
encoding and vice versa where needed
* src/support/os_cygwin.C: ditto
* src/support/getcwd.C
(getcwd): Use internal_path() with correct encoding
* src/support/docstring.[Ch]
(from_filesystem8bit): new conversion function
* src/support/environment.C
(getEnv): convert environment variable from local 8bit encoding to utf8
(setEnv): convert environment variable from utf8 to local 8bit encoding
* src/support/environment.h: document encoding of function arguments
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@16753 a592a061-630c-0410-9148-cb99ea01b6c8
http://bugzilla.lyx.org/show_bug.cgi?id=3114
* os.h
- new docstring adapted internal_path()
* qt_helpers.[Ch]:
- new QString adapted internal_path()
All other files: use that.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@16744 a592a061-630c-0410-9148-cb99ea01b6c8
the former is also trigged when updating dialogs. we should use toggled(bool) to en/disable widgets and in situations when we are sure that we always want to act on a toggle
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@16724 a592a061-630c-0410-9148-cb99ea01b6c8
* WorkArea::sheduleRedraw(): new pure virtual method.
* GuiWorkArea::showCursor(): handle the scheduled redraw.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@16708 a592a061-630c-0410-9148-cb99ea01b6c8
LyX instances. This re-enables copy/paste from the internal clipboard on
OS X (currently broken since Clipboard::isInternal() always returns false for
some reason).
* src/insets/insettabular.C
(InsetTabular::doDispatch): adjust to clipboard interface change
(InsetTabular::copySelection): ditto
* src/mathed/InsetMathGrid.C
(InsetMathGrid::doDispatch): ditto
* src/mathed/InsetMathNest.C
(InsetMathNest::doDispatch): ditto
* src/buffer.[Ch]
(Buffer::readString): New method: Read document from a string
(Buffer::readFile): Change return value from bool to enum (needed
for readString). Return wrongversion if we are reading from a string
and the version does not match.
(Buffer::do_writeFile): make public and rename to write
* src/CutAndPaste.C
(putClipboard): New helper, put stuff to the system clipboard
(void copySelectionHelper): Use putClipboard instead of
theClipboard().put()
(void copySelection): ditto
(void pasteClipboard): new method for pasting in text
(void pasteParagraphList):
* src/frontends/Clipboard.h
(Clipboard::get): Rename to getAsText
(Clipboard::getAsLyX): New method for getting the system clipboard
in LyX format
(Clipboard::hasLyXContents): New method telling whether there is LyX
contents in the clipboard
* src/frontends/qt4/GuiClipboard.[Ch]: Implement the new methods
* src/text3.C
(LyXText::dispatch): Use pasteClipboard for pasting the system
clipboard
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@16669 a592a061-630c-0410-9148-cb99ea01b6c8
a bug on Windows due to an unnecessary conversion to external style.
* src/insets/ExternalSupport.C
(subst_path): avoid a bug in the external material inset on Windows
by don't using external_path. The filename will be quoted and thus
there will be no problems with forward slashes.
* src/frontends/qt4/QGraphics.C
* src/frontends/qt4/QExternal.C
* src/frontends/qt4/QInclude.C:
(Qxxx::apply): On Windows, the user could input an absolute path in
native style by hand (without using the file dialog), so make sure
that no backslashes can slip in by this way.
* src/frontends/qt4/QPrefsDialog.C
(internal_path_list, external_path_list): new wrappers for the
corresponding functions in the os namespace.
(PrefPaths::apply): make sure that path_prefix is stored in the
internal style, i.e., without backslashes.
(PrefPaths::update): make sure that path_prefix is displayed to
the user in the native style.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@16659 a592a061-630c-0410-9148-cb99ea01b6c8
we don't set the selection with qApp->clipboard()->put().
Therefore we get the status of the internal selection from the cursor, and
the empty flag for fake selections is not needed anymore.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@16610 a592a061-630c-0410-9148-cb99ea01b6c8
- do not focus filename widget for already existing insets (bug 1663).
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@16604 a592a061-630c-0410-9148-cb99ea01b6c8
* LyXKeySym.h: replace global operator==() with pure virtual method.
* QLyXKeySym: new operator==() method.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@16598 a592a061-630c-0410-9148-cb99ea01b6c8
* src/frontends/qt4/QCitationDialog.[Ch]:
- implement KeyPressEvent, catch ESC key and clear params there as well
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@16594 a592a061-630c-0410-9148-cb99ea01b6c8
* src/frontends/qt4/QDocumentDialog.C:
* src/frontends/qt4/QPrefsDialog.C:
- include some information on the resizing bug,
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@16565 a592a061-630c-0410-9148-cb99ea01b6c8
(GuiSelection::haveSelection): Add a big comment what we actually do
here, and why. It took me quite some time to figure that out.
* src/frontends/Selection.h
(haveSelection): Add more detailed documentation
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@16527 a592a061-630c-0410-9148-cb99ea01b6c8
* src/frontends/qt4/GuiApplication.C
(GuiApplication::x11EventFilter): Only send or clear the selection
if the X event specified the primary selection. Previously this was
also done if the event specified the clipboard. We must ignore that,
because the clipboard is completele handled by qt.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@16526 a592a061-630c-0410-9148-cb99ea01b6c8
* src/frontends/LyXKeySym.h:
* src/frontends/qt4/QLyXKeySym.h:
* src/frontends/qt4/QLyXKeySym.C (print): add a forgui boolean that
tells whether the string should used localized names and special
characters.
* src/MenuBackend.C (binding):
* src/kbmap.C (print):
* src/kbsequence.C (print, printOptions): add forgui parameter.
* src/frontends/qt4/QLPopupMenu.C (addBinding): use a non-localaized
binding for Qt/Mac (because it needs to be parsed back) and a
localized one for the others (so that it looks good).
* src/kbmap.C (defkey,printbindings):
* src/lyxfunc.C (processKeySym,dispatch,viewStatusMessage): adapt to
above changes.
* src/kbmap.C (printKey): remove.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@16510 a592a061-630c-0410-9148-cb99ea01b6c8
(GuiApplication::x11EventFilter): Small optimization: Do not request
the current BufferView if it is not used
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@16506 a592a061-630c-0410-9148-cb99ea01b6c8
* WorkArea::resizeBufferView(): delete redraw() call.
* GuiWorkArea:
- need_resize_: new private member.
- expose(): move pixmap painting code to new private updateScreen() method.
- paintEvent(): resize the backing pixmap if need be.
- resizeEvent(): move the resizing code to paintEvent().
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@16499 a592a061-630c-0410-9148-cb99ea01b6c8
holding the Qt translations is not deleted. Now keyboard shortcuts and
Qt stock dialogs are properly translated.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@16496 a592a061-630c-0410-9148-cb99ea01b6c8
menu name.
* src/frontends/qt4/QLMenubar.C (macxMenuBarInit): hardcode the
special menu instead of reading it from ui files. Use labels that will
trigger Qt menu merging functionality onthe mac. This fixes menu
merging on LyX/Mac (but the menu names are still in english for now).
* lib/ui/stdmenus.ui: delete special menu definition "LyX".
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@16479 a592a061-630c-0410-9148-cb99ea01b6c8
* Clipboard.h: new isInternal() pure virtual method
* Selection.h: new isInternal() pure virtual method
* GuiClipboard, GuiSelection: implement new method.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@16476 a592a061-630c-0410-9148-cb99ea01b6c8
encodings in the preferences dialog
* src/LaTeXFeatures.C: special treatment for tis620-0 encoding
* src/bufferparams.C: ditto
* src/output_latex.C: ditto
* src/encoding.[Ch]: Add the possibility to iterate over all encodings
* src/paragraph_pimpl.C: Add latin10 and cp858 to Euro treatment
* src/buffer.C: Update format number
* src/frontends/qt4/QDocumentDialog.C: Don't hardcode available
encodings
* lib/lyx2lyx/LyX.py,
lib/lyx2lyx/lyx_1_5.py: implement conversion from 256 to 255
* lib/encodings: Add some encodings, fix all "unknown" entries
* development/FORMAT: Document file format change
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@16418 a592a061-630c-0410-9148-cb99ea01b6c8
instead of std::string
* src/support/lyxlib.h
* src/support/getcwd.C
(getcwd): return a FileName, not a std::string in filesystem encoding
* src/support/filetools.[Ch]
(makeAbsPath): return a FileName, not a std::string in undefined encoding
* src/support/lyxlib.h
* src/support/tempName.C
(makeAbsPath): return a FileName, not a std::string in undefined encoding
* many other files: Adjust to the changes above
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@16399 a592a061-630c-0410-9148-cb99ea01b6c8
* focusInEvent(): start the blinking cursor after the resize.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@16366 a592a061-630c-0410-9148-cb99ea01b6c8
* src/frontends/qt4/GuiWorkArea.C
(GuiWorkArea::doGreyOut): don't use LyXFont::SIZE_XXXX directly as
a font size as these are enum values and not the actual sizes.
Move the version number slightly to the right to make it more
readable against the splash screen.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@16353 a592a061-630c-0410-9148-cb99ea01b6c8
* WorkArea.h: processKeySym() is now public
* GuiView:
* event(): new method to intercept Tab key press.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@16352 a592a061-630c-0410-9148-cb99ea01b6c8
with Qt/Mac. Still does not work in non-default locale.
* QLPopupMenu.C (specialMacXmenuHack): remove, not needed anymore.
* GuiView.C (init): remove Mac hack, not needed anymore.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@16349 a592a061-630c-0410-9148-cb99ea01b6c8
ControlMath.C: cleanup order of symbols in math panel
iconpalette.C: 6 cols since many symbols come in pairs
Rrightarrow.xpm: was missing
searrow.xpm: was north east
swarrow.xpm: was north west
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@16316 a592a061-630c-0410-9148-cb99ea01b6c8
with the correct Qt4 signal QComboBox::editTextChanged.
* src/frontends/qt4/QSearchDialog.C
(QSearchDialog::QSearchDialog): use QComboBox::editTextChanged instead
of QComboBox::textChanged.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@16270 a592a061-630c-0410-9148-cb99ea01b6c8
from/to the local 8bit encoding with it.
Only the autotools build system is updated, scons and cmake users need to
add qt4 cpp flags when compiling libsupport, and link libsupport against
libQtCore.
* src/frontends/qt4/qt_helpers.[Ch]
(toqstr, qchar_to_ucs4, ucs4_to_qchar, ucs4_to_qstring,
qstring_to_ucs4, fromqstr): Move these qstring conversion functions
from here ...
* src/support/qstring_helpers.[Ch] ... to these new files
* src/support/docstring.[Ch]
(from_local8bit): new conversion function from local 8bit encoding
to ucs4
(to_local8bit): new conversion function from ucs4 to local 8bit
encoding to ucs4
(to_local8bit_failure): exception that is thrown by to_local8bit if
the argument cannot be converted to the local encoding
* src/support/filename.C
(FileName::toFilesystemEncoding): implement with the help of QFile
* src/support/Makefile.am: Add new files, qt4 cpp flags and link
against libQtCore
* src/client/client.C: Convert commandline input from local encoding
to ucs4. Convert stuff that is sent to to the server to utf8,
because LyX interprets it as utf8 on the other end of the pipe.
* src/lyx_main.C
(LyX::exec): convert commandline input from local encoding to utf8
(LyX::init): ditto
(LyX::easyParse): ditto
* development/scons/scons_manifest.py: Add new files
* config/qt4.m4: Define new variables QT4_CORE_INCLUDES,
QT4_CORE_LDFLAGS and QT4_CORE_LIB
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@16257 a592a061-630c-0410-9148-cb99ea01b6c8
* src/lyxfunc.C
(LyXFunc::dispatch): Move to GuiView::closeEvent the session code
for lastpos in LFUN_LYX_QUIT. Check for unsaved changes before
initiating the quit procedure in LFUN_LYX_QUIT and LFUN_WINDOW_CLOSE.
* src/frontends/qt4/GuiView.h
(class GuiView): New boolean member quitting_by_menu_.
* src/frontends/qt4/GuiView.C
(GuiView::GuiView): Initialize quitting_by_menu_.
(GuiView::close): Set to true quitting_by_menu_ before calling
the quit procedure and reset it afterwards.
(GuiView::closeEvent): Account for the close window button.
Save last positions to the session file. Remove wrongly placed
call to quitWriteAll.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@16248 a592a061-630c-0410-9148-cb99ea01b6c8
