* use the context language of the info inset (rather than the buffer
language), and translate strings accordingly
* for menu and shortcuts, use the Gui language instead
* actually care that all translatable strings end in po
(this wasn't the case).
Fixes: #5348, rest of #10463
Width is now 3 for top/bottomrule, 2 for midrule and 1 for cmidrule.
These numbers are bogus of course, but the goal is to help the user
see what he is doing.
It is a general problem when doing graphics to know where a line
begins and where it ends pixel-wise. At the instigation of Scott, and
with the use of the kmag magnifier, this commit corrects 3 areas:
* foreign marks were larger than the row element they were supposed to
mark. This could lead to moving lines, depending on paint ordering.
* visible spaces were drawn outside of their box (select a single
space to see this).
* the `L' blinking caret would leave a cursor dropping because the
horizontal part was too wide.
Minted does not have a language option but it is possible to enter
this option in the LyX interface for compatibility with the listings
package, and also for letting to enter a language not present in the
gui. So, this option is only used for properly specifying a language
in a listing, unless it is entered in the document settings dialog.
This case was not foreseen and thus the option was being passed to
the package as is, causing havoc. With this commit the option is
still available but is used to set a default language for a new
listing in place of the default "tex" language used so far.
This is not perfect, since variable width columns will break at a certain
treshold, but it is better than what we have now (no tabular width
indication at all)
This effectively enables linebreaks, multipars and layout changes in
non-fixed width (i.e., standard) table columns.
Fixes: #6577
TODO: metrics are wrong (too wide) on screen with linebreaks.
When a raster image with an advertised pixel density different
from 72 dpi is included in a latex file, the output image dimensions
are scaled by the ratio 72/pixel_density. Hence, if a clipping
bounding box is specified, it has to be scaled by the same ratio,
otherwise the images will be clipped differently on screen and output.
Here we use the extractbb command (present in any TeX distribution)
to ask about the output dimensions of the image as dictated by the
pixel density and compute the scaling ratio by the knowledge of the
actual dimensions. If, for whatever reason, extractbb is not found,
everything goes as before, because the clipping bounding box will
simply not be corrected.
The reordering of the code was incorrect. The code calling Change::paintCue()
has to come last, since it depends on the change_drawn value.
Spotted by coverity.
It is now possible in the float settings (doc dialog) to specify a global
(inner) alignment for floats, and in the float settings, this can be
overridden (just as with float placement)
Fixes: #8665
File format change.
We \cprotect them in fragile context. This allows \input, \include as
well as \verbatiminput and \lstinputlisting in sections etc.
They still don't work in titling (#2528)
Following a request by Günter, we consider the document fonts (only rm
for now) when selecting an appropriate font encoding.
See #9741
The new default font encoding setting "auto" does
* consider the font encoding needed by the language(s), which can now
have fallback alternatives
* Consider which font encoding is provided by the document font
Thus, cm now will result in OT1 fontenc, if the language can deal with
that.
The font_enc pref is ditched: it is no longer needed.
The automatism is still very basic and is subject to extension.
File format and prefs format change.
This change also applies to Comment insets. For example, Greyedout
and comment insets can now be inserted in section titles.
The usage of these insets in commands relies on the newly
implemented cprotect feature. The usage of these insets in
description items already worked fine (without cprotect).
This commit also enables modification of these insets (e.g.,
converting a LyX note to a Greyedout note) in commands.
This commit is related to #6969.
The problem was that, if we killed export when some graphic was
being converted, or some external template was being handled, it
would only cancel that process, and then it would just continue.
To deal with that, we need to do a few things:
1. Modify the return values for some of the Converters routines,
and similarly the routines for external templates, so we can
tell when something has been canceled.
2. Throw an exception from InsetGraphics or InsetExternal when this
has happened during export, but ONLY when the Buffer is a clone.
We shouldn't be able to 'cancel' export when we're, say, generating
code for the preview pane, but this keeps us on the safe side..
The exception then has to be caught, obviously, back in the export
routines in Buffer.
Probably Coverity will be unhappy about something here, but I'll
deal with that problem as it arises.
This allows (some) verbatim contents in macros, such as \url's with
specific chars (#, % etc.) in section headings or footnotes (#449)
or comments in captions (#9313).
The mentioned two bugs are fixed by this commit.
Note that the implementation is still rather basic and might need
extension for other cases.
This requires moving the bool that tracks this somewhere that it
is visible from BufferView. It seemed to make sense to put it as
a static member of InsetCitation.
This is currently only relevant fo InsetListings, which falls back to
a fixed-width encoding under specific conditions. It is now possible
to query the inset about that and report the correct encoding in
DocIterator::getEncoding.
Addresses the second part of #10995
A basic class like Length should not depend on something from
frontend.
This change allows to remove several dummy implementations of
theFontMetrics().
VCS InsetInfos were broken by the switch at 2e934fc5f8 to using
updateBuffer to handle them. But we do not really want to go through
that routine in a clone, not for those insets, whose contents we
want to be the same as in the original Buffer.
Also fixes some issues noted in discussion of this bug: Failure to
update after context menu switch; failure to re-calculate shortcuts,
which can change.
These classes come with their own working implementation of table
footnotes, so we are not supposed to use the tablefootnote or
footnote package.
Also add missing outliner name.
By default, inactive math corners are invisible. In practice they are
annoying because they are visible when selecting text, and they can
also overwrite some parts of the equation.
The code in Inset::drawMarkers2, which is only used for maths, is
moved to InsetMathHull. Moreover, the inactive corners are not drawn
when they have the same color as the math background. A better way to
achieve this would be to set the color to transparent, but we do not
support this yet.
Now the helper class contains logic that checks whether buffer are
known before closing them. This avoids potential crashes.
Use it in different places to siplify code. It is not clear at this
point whether it should be used everywhere.
Followup to bug #10847.
Along the lines suggested by JMarc, we now collect the list of bibfiles
in use in the updateBuffer routines. This actually does simplify the code
quite a bit. See the discussion there for reasons to go this way.
Basically, everything that does not depend on a BufferView should move
there. Some methods that do not seem to need a BufferView, like
selHandle or IdxFirst or push actually depend on it and could not be
moved.
This allows to simplify a few uses of recordUndo helpers.
- Move some methods to DocIterator: nextMath, prevMath, getPossibleLabel,
getEncoding;
- Move some methods to CursorData: setCursor, setCursorSelectionTo,
(setCursorTo|normal|reset)Anchor, (set|clear)Selection,
sel(|ection)(Begin|End), selectionAsString, info, currentState,
(mark|clear|check)NewWordPosition, fixIfBroken, sanitize, all undo
related methods, reset, isInside, leaveInset, current mode;
- kill some unused methods: macromode, replaceWord, setScreenPos, touch,
markInsert, markErase;
- Move code around to group things, and add a few comments (a lot remains to be done).
This changes lead to some related changes in other classes: removal,
change of parameter.
No intended change.
Spaces are, amazingly, allowed at the end of bibliography keys. So we
introduce a new parameter allowing getVectorFromString not to trim
whitespace, and then use it.
Scanning is rather slow, so this improves performance in specific
situations (multiple inclusion of larger files in master/child or
chapterbib context)
The current spelling is not strictly wrong, but flagged as unusual or
historical by some authorities. It is also found fault with many
spell checkers. Thus we decided to move to the more standard "-ible"
form once and for all.
See #10678 for discussion
This part covers the most tricky part: the internal naming.
Translations and layouts will follow.
This will all also all be backported to 2.3.x, for the sake of backwards
compatibility (cherry-picking).
The current spelling is not strictly wrong, but flagged as unusual or
historical by some authorities. It is also found fault with many
spell checkers. Thus we decided to move to the more standard "-ible"
form once and for all.
See #10678 for discussion
This part only covers the usage in comments and the like. More to follow.
This will all also all be backported to 2.3.x, for the sake of backwards
compatibility (cherry-picking).
in updateBuffer().
This is in response to a reported crash. See
https://www.mail-archive.com/lyx-devel@lists.lyx.org/msg202217.html
Commit af381a2f addressed the crash, and is worth doing anyway. But
this also makes sense.
Also adds a flag to tell us whether we need to recalculate the
relevant information. In some cases, there is no need to do so
more than once. (Note that, with the existing code, we *never*
recalculate, which would have given rise to bugs.)
The previous redirection of the senseless option "bb" to "viewport" in
PDFLaTeX output has been removed in a recent graphics package update.
This breaks documents, since clipped graphics silently stop displaying.
This change restores the previous output by using "viewport" instaed of
"bb" for non-PS/DVI output, while leaving PS/DVI untouched (where "bb"
and "viewport" behave differently.
Fixes: #7910
This fixes the display of closed ERTs, Indexes etc. when they contain
special chars, logos or quotation marks.
(Since quotation marks in ERTs are now insets, not chars anymore,
this also fixes a bug/regression of the display of babel shortcuts
such as "= in closed ERTs; hence I consider this fix necessary for 2.3.x)
This commit does a bulk fix of incorrect annotations (comments) at the
end of namespaces.
The commit was generated by initially running clang-format, and then
from the diff of the result extracting the hunks corresponding to
fixes of namespace comments. The changes being applied and all the
results have been manually reviewed. The source code successfully
builds on macOS.
Further details on the steps below, in case they're of interest to
someone else in the future.
1. Checkout a fresh and up to date version of src/
git pull && git checkout -- src && git status src
2. Ensure there's a suitable .clang-format in place, i.e. with options
to fix the comment at the end of namespaces, including:
FixNamespaceComments: true
SpacesBeforeTrailingComments: 1
and that clang-format is >= 5.0.0, by doing e.g.:
clang-format -dump-config | grep Comments:
clang-format --version
3. Apply clang-format to the source:
clang-format -i $(find src -name "*.cpp" -or -name "*.h")
4. Create and filter out hunks related to fixing the namespace
git diff -U0 src > tmp.patch
grepdiff '^} // namespace' --output-matching=hunk tmp.patch > fix_namespace.patch
5. Filter out hunks corresponding to simple fixes into to a separate patch:
pcregrep -M -e '^diff[^\n]+\nindex[^\n]+\n--- [^\n]+\n\+\+\+ [^\n]+\n' \
-e '^@@ -[0-9]+ \+[0-9]+ @@[^\n]*\n-\}[^\n]*\n\+\}[^\n]*\n' \
fix_namespace.patch > fix_namespace_simple.patch
6. Manually review the simple patch and then apply it, after first
restoring the source.
git checkout -- src
patch -p1 < fix_namespace_simple.path
7. Manually review the (simple) changes and then stage the changes
git diff src
git add src
8. Again apply clang-format and filter out hunks related to any
remaining fixes to the namespace, this time filter with more
context. There will be fewer hunks as all the simple cases have
already been handled:
clang-format -i $(find src -name "*.cpp" -or -name "*.h")
git diff src > tmp.patch
grepdiff '^} // namespace' --output-matching=hunk tmp.patch > fix_namespace2.patch
9. Manually review/edit the resulting patch file to remove hunks for files
which need to be dealt with manually, noting the file names and
line numbers. Then restore files to as before applying clang-format
and apply the patch:
git checkout src
patch -p1 < fix_namespace2.patch
10. Manually fix the files noted in the previous step. Stage files,
review changes and commit.
This is a fixup to fc7fb6a564. The fix in there seems perfectly
correct (up to now), but for some reason, I could not refrain from
making InsetInfo not active. "What could possibly go wrong?", I heard
myself think.
Now I know: this causes an assertion error in InsetText::updateBuffer
because DocIterator::forwardPos does not enter the inset anymore.
This is a fixup to the series of commits 522516d9, d0acc3e5, 13c3c148.
Actually the right thing to consider in all situations is isActive(),
which really means `can a cursor be in there?'.
Improve the description of isActive() and editable() in Inset.h.
Set isActive() to false for InsetInfo, since no cursor should ever go there.
Again part of #10667.
The code in InsetLabel::updateReferences code changes reference insets
in potentially several buffers. When recording undo, it is important
to use the right undo stack, otherwise crashes can ensue.
Once it is done, it is neccessary to create undo groups as needed.
This is done using UndoGroupHelper. This demonstrates a shortcoming of
UndoGroup helper: if a buffer is encountered in two seperate
occasions, two undo groups will be created for this buffer. This is
not correct.
Fixes bug #10643.
