The lyx2lyx conversion for format 352 was incomplete: It should have been
added the \use_indices setting, but it relied on the fact that the default in
LyX for missing \use_indices is the same as the old format without that
setting used. However, the default might change in the future, and later
lyx2lyx conversions rely on that setting as well.
trim_eol() assumes that a line always ends either with \n, \r, or \r\n.
This assumption is always valid except for the last line of a document, since it
may miss the trailing newline. LyX does not create such documents, bu they may
result from automatic creation tools, and LyX can read them, so lyx2lyx should
be able to read them as well.
This is a follow-up of bug #8967. The implementation is self-explaining, the
only part which needs a comment is lyx2lyx: Since a 100% correct solution is
not possible, it has been decided not to switch amsmath off in the forward
conversion if no other ams command than \smash[t] and \smash[b] is used, but
to consider it a bug that older versions do not load amsmath automatically for
these commands. In the backward direction it is easy to keep the document
compilable, so just do that.
The algorithm used for breaking a paragraph in LaTeX export is changed
for avoiding spurious blank lines causing too much vertical space.
This change is tied to the introduction of a new inset (with two
different specializations) helping in either outputing LaTeX paragraph
breaks or separating environments in LyX. Both of the above goals were
previously achieved by the ---Separator--- layout and can now be
accomplished by the new inset in a more natural way. As an example,
after leaving an environment by hitting the Return key for two times,
a third return automatically inserts a parbreak inset, which is
equivalent to the old separator layout, i.e., it also introduces a
blank line in the output. If this blank line is not wanted, the
parbreak separator can be changed to a plain separator by a right
click of the mouse. Of course, an environment can still be separated
by the following one by using the Alt+P+Return shortcut (or the
corresponding menu key), but now the plain separator inset is used
instead of the old separator layout, such that no blank line occurs in
the LaTeX output.
Old documents are converted such that the LaTeX output remains unchanged.
As a result of this conversion, the old separator layout is replaced by
the new parbreak inset, which may also appear in places where the old
algorithm was introducing blank lines while the new one is not.
Note that not all blank lines were actually affecting the LaTeX output,
because a blank line is simply ignored by the TeX engine when it occurs
in the so called "vertical mode" (e.g., after an alignment environment).
The old ---Separator--- layout is now gone and old layout files using it
are also automatically converted.
Round trip conversions between old and new format should leave a document
unchanged. This means that the new behavior about paragraph breaking is
not "carried back" to the old format. Indeed, this would need introducing
special LaTeX commands in ERT that would accumulate in roundtrip
conversions, horribly cluttering the document. So, when converting a
modified document to old formats, the LaTeX output may slightly differ in
vertical spacing if the document is processed by an old version of LyX.
In other words, forward compatibility is guaranteed, but not backwards.
lyx2lyx died with UnicodeDecodeError: 'ascii' codec can't decode byte if a
layout with a non-ASCII character in the file name was used, since the
textclass member of the LyX class was of type str, and not unicode.
Babel doesn't support this variant (yet), so we use ngerman. However, for spell checking and thesaurus, this makes
a difference.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@27725 a592a061-630c-0410-9148-cb99ea01b6c8
* Fix lyx2lyx default debug level
* Fix lyx2lyx verbose mode
* Use stderr consistently
* Update default version when running from src directory
* Output prettier and more useful information
* Allow to specify the target version, the format will be accordingly
* Have a more reliable chain of dependencies (fixes corner cases < 2.15)
* Add placeholder for future file format changes
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@27506 a592a061-630c-0410-9148-cb99ea01b6c8
- GuiGraphics dialog field for setup new groups.
- Graphics context menu for assigning to certain group.
- Fileformat change for groupId field in Graphics inset.
- Undo mechanism added to inset-apply, for catching changes
in preference dialog.
- Qt designer 4.4 used now.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@24644 a592a061-630c-0410-9148-cb99ea01b6c8
file format change.
This is the last feature for today. Promised.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@24540 a592a061-630c-0410-9148-cb99ea01b6c8
Provide only one Japanese language that is encoding independent, patch partly by Koji Yokata.
This fixes http://bugzilla.lyx.org/show_bug.cgi?id=4597
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@24053 a592a061-630c-0410-9148-cb99ea01b6c8
* src/Buffer.cpp:
- file format change to 324
* development/FORMAT:
- document file format change
* src/insets/InsetNewline.{cpp,h}:
- the former two separate derivates are now merged into one inset
with proper Params and Mailer. This simplifies the structure and allows for
switching between the two kinds.
* src/Text3.cpp:
- The newline insets are now being generated with
newline-insert [newline|linebreak]
* src/factory.cpp:
* src/Text.cpp:
- Newline inset is now a proper inset with opening and closing tag.
* src/FuncCode.h:
* src/LyXAction.cpp:
* src/Text3.cpp:
* src/insets/InsetCollapsable.cpp:
* src/insets/InsetTabular.cpp:
* src/mathed/InsetMathGrid.cpp:
* src/mathed/InsetMathHull.cpp:
- remove LFUN_NEW_LINE, LFUN_LINE_BREAK,
add LFUN_NEWLINE_INSERT
* lib/lyx2lyx/LyX.py:
* lib/lyx2lyx/lyx_1_6.py:
- conversion and reversion routines for newline insets.
* lib/ui/stdmenus.inc:
* lib/ui/stdcontext.inc
- adapt menu and add context menu to switch between newpage variants.
* lib/bind/*.bind:
- adapt to new lfuns.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@23966 a592a061-630c-0410-9148-cb99ea01b6c8
* src/Buffer.cpp:
- file format change to 323
* development/FORMAT:
- document file format change
* src/insets/InsetNewpage.cpp:
- the former four separate derivates are now merged into one inset
with proper Params and Mailer. This simplifies the structure and allows for
switching between the various kinds.
* factory.cpp:
- The newpage insets are now being generated with
newpage-insert [newpage|pagebreak|clearpage|cleardoublepage]
* src/Text.cpp:
- Newpage inset is now a proper inset with opening and closing tag.
* src/FuncCode.h:
* src/LyXAction.cpp:
* src/Text3.cpp:
* src/insets/InsetCollapsable.cpp:
- remove LFUN_PAGEBREAK_INSERT, LFUN_CLEARPAGE_INSERT
and LFUN_CLEARDOUBLEPAGE_INSERT
* lib/lyx2lyx/LyX.py:
* lib/lyx2lyx/lyx_1_6.py:
- conversion and reversion routines for newpage insets.
* lib/ui/stdmenus.inc:
- adapt menu and add context menu to switch between newpage variants.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@23942 a592a061-630c-0410-9148-cb99ea01b6c8
- gets rid of the M_TOGGLE_LINE_... functions
- allows arbitrary clines without multicol
- sets arbitrary vertical lines through multicol
- drop row/col line properties, everything is now stored at the cell level
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@23812 a592a061-630c-0410-9148-cb99ea01b6c8
LyX file format to 318. The Embedded files panel of document settings has
been simplied, with working add and remove buttons. Note that bease BufferParams
lacks buffer path information, extraEmbeddedFiles are vector<string>, instead
of EmbeddedFileList (as previously planned).
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@23606 a592a061-630c-0410-9148-cb99ea01b6c8
- file format change
- new example files and an example address database
- remove ugly hack from scrlttr2.layout and fix bug 4529
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@22764 a592a061-630c-0410-9148-cb99ea01b6c8
The changes that accomplish this part are in ModuleList.{h,cpp}, configure.py, and the *.module files themselves. This is a format change, and the lyx2lyx is in those files.
By itself, that change would not be major, except for the fact that we do not want the module to be represented in the UI by its filename---e.g., theorems-std---but rather by a descriptive name, such as "Theorems". But that change turns out to be wholly non-trivial. The mechanism for choosing modules was the same as---indeed, was borrowed from---that in GuiCitation: You get a list of modules, and choosing them involves moving strings from one QListView to another. The models underlying these views are just QStringListModels, which means that, when you want to know what modules have been selected, you see what strings are in the "selected" QListView. But these are just the descriptive names, and we can't look up a module by its descriptive name if it's been translated. That, indeed, was the whole point of the change to the new representation.
So, we need a more complicated model underlying the QListView, one that will pair an identifying string---the filename minus the extension, in this case---with each item. This turns out not to be terribly difficult, though it took rather a while for me to understand why it's not difficult. There are two parts:
(i) GuiSelectionManger gets re-written to use any QAbstractListModel, not just a QStringListModel. This actually seems to improve the code, independently.
(ii) We then subclass QAbstractListModel to get the associated ID string, using the Qt::UserRole slot associated with each item to store its ID. This would be almost completely trivial if QAbstractListItem::itemData() included the QVariant associated with this role, but it doesn't, so there are some additional hoops through which to jump.
The new model, a GuiIdListModel, is defined in the files by that name. The changes in GuiSelectionManger.{h,cpp} make it more abstract; the changes in GuiDocument.{h,cpp} adapt it to the new framework.
I've also updated the module documenation to accord with this change.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@22501 a592a061-630c-0410-9148-cb99ea01b6c8
- fileformat change
(Interlingua was the last missing language supported by babel)
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@21976 a592a061-630c-0410-9148-cb99ea01b6c8
- fileformat change
(I wonder why support for them was removed (must be before LyX 1.3), because the old reLyX script listed them as supported)
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@21783 a592a061-630c-0410-9148-cb99ea01b6c8
- fileformat change
- tex2lyx support
- rename LFUN_BREAK_LINE to LFUN_NEW_LINE because this is what the lfun does and to avoid confusions
- new menu entry
- new shortcut C-S-Return
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@21778 a592a061-630c-0410-9148-cb99ea01b6c8
- rename former "pagebreak" to "newpage" since it produces a \newpage
- new LFUN
- menu entry
- tex2lyx support
- fileformat change
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@21732 a592a061-630c-0410-9148-cb99ea01b6c8
- add support for hyerlink targets - fileformat changed
(For Hyperlink.cpp I still need help to get rid of the strings and chars and use docstrings and char_type instead!)
Can anyone please open the changed Hyperlink.ui with a Qt 4.2 designer or below, save it and commit? Thanks. (Otherwise you cannot compile it.)
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@21347 a592a061-630c-0410-9148-cb99ea01b6c8
- rename the lfun to href-insert.png
- rename the files to Hyperlink...
- the former URLUi produces now \href commands (hyperref)
Only missing thing is the lyx2lyx conversion routine - this will be done by Richard
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@20950 a592a061-630c-0410-9148-cb99ea01b6c8
(i) The file format is changed, so that command insets are represented as:
\begin_inset CommandInset insetype
LatexCommand command
...
\end_inset
This involves some lyx2lyx and changes to the readInset() routine in factory.cpp
(ii) The InsetCommand and InsetCommandParams classes also have to be changed, as the command name was used in these classes for various purposes for which the inset type ought really to be used.
Further clean-up to come.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@20544 a592a061-630c-0410-9148-cb99ea01b6c8
is kept in sync with its usage)
LyX.py: make source more readable, place whitespaces, break long
lines, add documentation strings, etc.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@20279 a592a061-630c-0410-9148-cb99ea01b6c8
- Format incremented to 284
- LaTeX-package wrapfig is now used instead of flotflt for wrap floats (this allows us to implement now also a table wrap float)
(the optional overhang argument of wrapfig will be implemented later)
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@20185 a592a061-630c-0410-9148-cb99ea01b6c8
Design goal: Allow the use of layout "modules", which are to LaTeX packages as layout files are to LaTeX document classes. Thus, one could have a module that defined certain character styles, environments, commands, or what have you, and include it in various documents, each of which uses a different document class, without having to modify the layout files themselves. For example, a theorems.module could be used with article.layout to provide support for theorem-type environments, without having to modify article.layout itself, and the same module could be used with book.layout, etc.
This patch adds the backend. The ModuleList class holds a list of the available modules, which are retrieved from lyxmodules.lst, itself generated by configure.py. There are two LFUNs available: modules-clear and module-add, which do the obvious thing; you can test by typing these into the minibuffer, along with the name of one of the available modules: URL (a CharStyle), Endnote (a Custom Inset), and---with the spaces---End To Foot (View>LaTeX and look at the user preamble), which are themselves in lib/layouts. There are some others, too, that allow theorems to be added to classes like article and book.
The GUI will come next.
Issues: (i) The configure.py script could be improved. It'd be nice, for example, if it tested for the presence of the LaTeX packages a particular module needs. But this would mean re-working the LaTeX script, and I don't know how to do that. Note that at present, the packages are ignored. This will change shortly. (ii) I've used std::string in LyXModule, following what seemed to be a precedent in TextClass. If some of these should be docstrings, please let me know, and I'll change them. (iii) There is at present no distinction between LaTeX and DocBook modules. Should there be? That is: Should there be modules that are available when the document class is a LaTeX class and others that are available only when it is DocBook? Or should there just be one set of modules? Each module can of course indicate for what it is suitable in its description.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@19893 a592a061-630c-0410-9148-cb99ea01b6c8
- Split the language Arabic into "arabic_arabi" that uses the arabi-package and "arabic-arabtex" that uses the arabTeX-package to typeset Arabic. This is needed because both packages have some advantages over the other people need.
(This change is a consequence of a long and fruitful discussion with Mostafa, Dov, and me.)
Patch by Dov and me.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@18887 a592a061-630c-0410-9148-cb99ea01b6c8
language to be in the paragraph's language. This is necessary due to format
change 259, but the language was forgotten in lyx2lyx back then. It's important
for Bidi documents.
(fixes bug http://bugzilla.lyx.org/show_bug.cgi?id=3789)
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@18766 a592a061-630c-0410-9148-cb99ea01b6c8
Introduces new encodings for the CJK-languages.
The CJK-languages can now be selected from LyX's menu.
For remaining small problems, see the thread "Help needed for bug 3043" on the devel-list.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@18216 a592a061-630c-0410-9148-cb99ea01b6c8
