When used as an adjective, both variants "descendent" and
"descendant" are acceptable, but when used as a noun only
"descendant" should be used.
For a reference, see here:
https://en.wiktionary.org/wiki/descendent#Noun
A branch inset modifies the layout of the internal structures in
which the text is organized. When a branch is active, it is as if it
was not there, but its only presence makes a paragraph which would not
be the last one to actually be the last one, or the check for the
language of the previous paragraph to fail because there is no
previous paragraph before the first one in a branch inset.
Oney way I found to tackle it, is tracking whether the typesetted
paragraphs are actually part of an active branch inset and acting
accordingly.
The current spelling is not strictly wrong, but flagged as unusual or
historical by some authorities. It is also found fault with many
spell checkers. Thus we decided to move to the more standard "-ible"
form once and for all.
See #10678 for discussion
This part covers the most tricky part: the internal naming.
Translations and layouts will follow.
This will all also all be backported to 2.3.x, for the sake of backwards
compatibility (cherry-picking).
is output when a branch is NOT activated. Fixes bug #7698.
At the moment, inversion is controlled through the branch settings
dialog. There is no provision for inserting inverted insets directly,
or for changing them from the context menu. Both of these could be
done, of course. The latter would need LFUN_BRANCH_TOGGLE_INVERTED.
After the previous commit, tooltip in the outliner are formatted automatically,
along with the other tooltips. A previous commit had already removed the
expensive call to tooltipText() that, although it gave a better rendering, was
very expensive (cf64064). This patch finishes to remove the custom tooltip
from the model data in the outliner.
(It would be nice to reintroduce a tooltip based on tooltipText(), but there
seemed to be a consensus that in that case one would prefer a less expensive
approach that computes the tooltip on the fly.)
(http://mid.gmane.org/565E17DD.7090008@clear.net.nz)
Fix the pilcrow and the cross in the outliner for Windows and old Ubuntus.
The thin space after the cross is based on aesthetics (in Ubuntu at least) after
trying both with and without a normal space. A thin space is already used for
display in BiblioInfo.cpp, so I presume it is safe.
Ideally, I prefer ❌ (CROSS MARK), whose description fits the purpose, over ✖
(HEAVY MULTIPLICATION X), which looks too bold in the UI. Whereas ✕
(MULTIPLICATION X, successfully tested in Windows by Andrew) looks too dim. But
❌ (CROSS MARK) is next to ❎ (NEGATIVE SQUARED CROSS MARK) so it might be as
problematic as the latter.
Do not output the cross on the author name in the toc of tracked changes.
Use the function support:truncateWithEllipsis() to shorten a docstring with
... at the end. Actually we use U+2026 HORIZONTAL ELLIPSIS instead of "..." when
automatically shortening strings. This is to be consistent with Qt's own
truncation and is much nicer on the screen.
This includes the bugs #9575 and #9572 regarding broken text elision in the
outliner.
Known issues (non-regressions):
* TocBackend::updateItem() should be rewritten to update all TOCs. (#8386)
* "..." should be replaced with … everywhere else on the interface (including
translation strings).
* We should prefer to rely on QFontMetrics::elidedText() to truncate strings
with an ellipsis whenever possible, or an equivalent for the buffer view
dependent on the font metrics. See the warning in src/support/lstrings.h.
* New TOC "math-macro". This means that math macros can now be accessed in the
outline pane in their order of appearance or in alphabetical order, and can be
searched using the filter.
* Lists of floats now show subfloats deeper in the navigation menu
* The arbitrary 30 element cut-off after which nothing is shown except "Open
Navigator..." is removed. Menus now have no limit in size, so Qt may display
them scrollable. In exchange, we always show "Open outliner..." at the
beginning. I tested for performance issues with a rather complex document and
it is fine; but this does not exclude corner cases with lots of TOC entries of
a certain kind. If necessary, populating the navigation sub-menu should be
delayed like the main menu.
* Elements that do not contribute to the output (e.g. in a note, a disabled
branch) are now preceded with a symbol indicating this status. (The machinery
was already there; I wonder why it was not implemented already.) I have chosen
U+274E NEGATIVE SQUARED CROSS MARK.
* Fix the contextual menus in the outliner (bug introduced at 94e992c5).
* Toc item now move to the caption when present, but first center on the float,
to prevent the situation where the caption is at the top of the screen and the
contents of the float is off-screen above the caption.
(Internally, the action of the toc items can now be customised)
* Fix the LyXHTML output. Disabled captions no longer appear in the list of
figures.
We introduce TocBuilder for building TOCs that take into account both float
insets and their captions.
* Floats without caption are shown with their content.
* Floats with a caption are shown with their caption, but clicking the entry now
correctly moves to the float and not to the caption.
* Subsequent captions produce additional entries in the TOC.
* Figures and subfigures are correctly ordered in the outliner.
* New TOC "senseless" for captions appearing alone (a bit like broken references
are still displayed in the menu and outliner).
* Disable LFUN_CAPTION_INSERT if there is already a caption in a listing
Known issues:
* Inconsistent output for includes located inside floats
* We should record the end of the float in addition of the beginning for a more
accurate cursor -> outliner entry conversion
* Remove the UndoKind parameter in the general interface
* move recordUndoInset to Cursor
* remove one variant of Undo::recordUndo.
* get rid of Text::recUndo.
Rename recordUndoFullDocument to recordUndoFullBuffer.
Separate the notion of recording changes to paragraphs and recording changes in buffer parameters.
Audit every user of recordUndoFullDocument and replace it with either recordUndoBufferParams or recordUndoFullBuffer. Add comments to identify remaining work.
so we can write a limited amount when using this for TOC and
tooltip output.
This should solve the problem with slowness that Kornel noticed,
which was caused by our trying to write an entire plaintext
bibliography every time we updated the TOC. We did that because
he had a bibliography inside a branch, and we use plaintext for
creating the tooltip that goes with the branch list.
Other related bugs were fixed along the way. E.g., it turns out
that, if someone had an InsetInclude inside a branch, then we would
have been writing a *plaintext file* for that inset every time we
updated the TOC. I wonder if some of the other reports of slowness
we have received might be due to this kind of issue?
from the context menu. As mentioned in the FIXME, we cannot now
handle the case where the branches are held in a master buffer.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@40334 a592a061-630c-0410-9148-cb99ea01b6c8
counting when exporting to latex. This is done for the code comprised
between \begin{document} and \end{document}, while the preamble code
still needs manual calls to TexRow::newline() for registering new lines.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@37584 a592a061-630c-0410-9148-cb99ea01b6c8
blank lines may be inadvertently output. This is achieved by using two
special iomanip-like variables (breakln and safebreakln) in the lyx::
namespace. When they are inserted in the stream, a newline is output
only if not already at the beginning of a line. The difference between
breakln and safebreakln is that, if needed, the former outputs '\n'
and the latter "%\n".
In future, the new class will also be used for counting the number of
newlines issued. Even if the infractrure for doing that is already in
place, the counting is essentially still done the old way.
There are still places in the code where the functionality of the
class could be used, most probably. ATM, it is used for InsetTabular,
InsetListings, InsetFloat, and InsetText.
The Comment and GreyedOut insets required a special treatment and a
new InsetLayout parameter (Display) has been introduced. The default
for Display is "true", meaning that the corresponding latex
environment is of "display" type, i.e., it stands on its own, whereas
"false" means that the contents appear inline with the text. The
latter is the case for both Comment and GreyedOut insets.
Mostly, the only visible effects on latex exports should be the
disappearing of some redundant % chars and the appearing/disappearing
of null {} latex groups after a comment or lyxgreyedout environments
(they are related to the presence or absence of a space immediately
after those environments), as well as the fact that math environments
are now started on their own lines.
As a last thing, only the latex code between \begin{document} and
\end{document} goes through the new class, the preamble being directly
output through odocstream, as usual.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@37360 a592a061-630c-0410-9148-cb99ea01b6c8
of things like:
pit.push_back(CursorSlice(*this));
which I've had to change to:
pit.push_back(CursorSlice(const_cast<InsetCaption &>(*this)));
and similarly in a few other places.
If anyone thinks we should instead have:
explicit CursorSlice(Inset const &);
then we can also do that.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@37192 a592a061-630c-0410-9148-cb99ea01b6c8
that also makes sure it doesn't do more work than it needs to do, by
limiting the size to 40 characters. Previously, InsetBranch::addToToc()
would have added a string representing the entire contents of the
branch! It's hard to imagine that having to recalculate that sort of
thing doesn't cause some problems with speed, especially in documents
with lots of notes and branches and such.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@36974 a592a061-630c-0410-9148-cb99ea01b6c8
