The problem was due to the use of the wrong symbol for the slash.
The zero-width symbol for the \not operator was being used.
Using TeX fonts for all symbols gives now a better uniform look.
It is not possible using the alternative code even with Qt 5.4.1
because some glyphs are still missing.
Note that I move the definition of cur up because we need to check if
it changed before the return. I also removed the const because
notifyCursorLeavesOrEnters() requires that.
This commit probably fixes other issues for any inset that defines
notifyCursorLeaves().
This fixes only part of #6173.
Normally the theBufferList().updatePreviews(); statement would go inside
of PrefDisplay::applyRC. However, that would not work well because
Buffer::updatePreviews() calls loader() which conditions on
(lyxrc.preview == LyXRC::PREVIEW_OFF) but the new RC has not been set at
this point.
Control + Shift + PgDn now moves a tab to the right.
Control + Shift + PgUp now moves a tab to the left.
These keybindings are consistent with Chromium, Firefox,
Nautilus, and gnome-terminal.
Note that I allow for wrapping. This is consistent with
allowing wrapping for buffer-{next,previous}, but there
might be reasons to disable it in the future.
buffer-next and buffer-previous are now only enabled
if there is more than one tab. Note that it does not
matter whether we are at the first or last tab because
we cycle.
Since the logout process still can be canceled here, we should only
check that all dirty buffers are saved and that the session state is
recorded.
Please test, particularly on Windows and OSX, that logging out with LyX
running (both with and without dirty buffers) proceeds sensibly and that
the LyX session is correctly restored when you re-login.
Building on cd8be655, we still allow viewing a produced PDF even if
there were compilation errors. However, now the user must click the
"Show Output Anyway" button in the LaTeX Errors dialog. The reason
is that before, there was a chance that the user would not realize
there was an error (because the PDF would be shown over the error
dialog). The approach in this commit makes it more clear that there
is an error.
A new LFUN is introduced, LFUN_BUFFER_VIEW_CACHE. It is useful not
just for the implementation of the "Show Output Anyway" button, but
also to show the last compiled version of a document, which can save
time if a document takes a long time to compile (e.g. heavy use of
knitr).
* Disable "New Inset" button
* Do not disable line edits, but use setReadOnly instead (this allows copying contents)
Fixes: #9408
Note that some dialogs still need some care.
The computation of length on screen depend in particular of the computation of the size of an em. Many places of the code used to rely on the width of the M character, which is not really correct:
http://en.wikipedia.org/wiki/Em_%28typography%29
In digital typography, the best value to use is the point size of the font.
* Implement FontMetrics::em(), which returns the value in pixels of the EM unit.
Convert code to use it.
* Introduce Length::inPixel(MetricsBase const &), which takes the textwidth and em information from the MetricsBase object. Convert code to use it.
* Fix several places where Length::inPixel is used without a proper em value.
* add mathed_font_em() helper function. It should eventually be removed like some other functions in MathSupport.
* Add dummy implementation of FontMetrics to tex2lyx for linking purposes.
The problem came from the fact that Qt associates Interlingua to locale C.
Now, we do not rely anymore on the Qt locale to set the language. I suspect that the problem will still exist if the system locale is ia_IA.
Fixes bug #9267.
If a compressed svg icon is present, load it instead of a png one.
Also introduce two more sizes (huge and giant icons) that should be
useful when using hires displays, as svg icons automatically scale
to the desired size without loss of quality.
The math icons for the symbol image in the math completer were hardcoded to the
command names. This is wrong for some icons for various reasons, e.g. the case
insensitivity of windows file systems. Therefore we have to use the replacement
list which is also used for the toolbar icons. Bug #3538 is not closed because
of this problem, but IMHO it has nothing to do with this bug, it is a more
general one.
After the str-metrics merge, the kludge for displaying symbols whose
code point corresponds to a soft-hyphen was not working anymore.
The solution is replicating the offending glyphs with index 0x00ad
at a different index. They were replicated at 0x00ac, whose glyph
was missing in all affected fonts.
However, this would not work by alone because, if a system font with
same family name exists, it would be picked up instead of the right one
(at least on non-Windows platforms). For this reason, the style of the
fonts has been changed from "Regular" to "Lyx", so that we can discriminate
the right font. However, this requires using at least Qt 4.8. If an
older Qt is used *and* a system font with same family name is already
available, the affected glyphs will all turn out on screen as the
"logical not" symbol.
I have also set the executable flag on the font files, because on Windows
they are loaded only in this case.
This solves #9229.
This commit fixes a thinko in [8bab2338/lyxgit] causing the warning:
QObject::connect: No such slot lyx::frontend::GuiPreferences::slotApplyRC() in ../../../../src/frontends/qt4/GuiPrefs.cpp:3308
QObject::connect: (sender name: 'applyPB')
QObject::connect: (receiver name: 'PrefsUi')
This fixes the -geometry command line option and restores the
"Use icons from system's theme" checkbox in the preferences.
There is still code addressing Qt4 and xlib that has to be
audited. This code cannot be compiled with Qt5 because the
default backend is now xcb and not xlib. I have marked such
code with a "FIXME QT5" comment.
This implement horizontal scrolling of rows to allow editing insets
(math, tabular...) that are larger then the screen. The scrolling happens
as the cursor moves, in order to make sure that the cursor is always visible.
This effectively closes an 11 years old bug.
This feature is the result of the work of Hashini Senaratne as part of
Google Summer of Code 2013. The code has been cleaned-up for inclusion
and remaining bugs have been fixed.
Fixes bug: #1083.
[This commit is the output of the "horizontal scrolling" GSoC 2013
project, by Hashini Senaratne. The code has been cleaned up, some
variables have been renamed and moved from the Cursor class to
BufferView::Private. This is the base from which I (jmarc) will polish
the feature for landing on master.
Below is the original commit log of Hashini, updated to reflect the
changes that have been done.]
This feature also applicable for other insets; graphics and labels.
This implementation is capable of scrolling a single row when reaching
its content which is beyond the screen limits, using left and right
arrow keys.
The attribute 'horiz_scroll_offset_' introduced in the
BufferView::Private class plays a main role in horizontal scrolling of
the wide rows that grow beyond the screen limits. This attribute
represents by how much pixels the current row that the text cursor
lies in should be get scrolled.
The main logic that is responsible for drawing the scrolled rows is
within the BufferView class, BufferView::checkCursorScrollOffset.
* The main logic is called via BufferView::draw.
* What this does is set the horiz_scroll_offset_ attribute in in order to
show the position that the text cursor lies in.
* To make sure that BufferView::draw gets involved when Update flag is
FitCursor, necessary changes are made in BufferView::processUpdateFlags.
Basically what the logic that used to set the horiz_scroll_offset_
does is,
* The row which the text cursor lies in is identified by a
CursorSlice that points to the beginning of the row. This is the
'rowSlice' variable used in BufferView::checkCursorScrollOffset. Acessors
are added to obtain this variable. Here row objects were not used to
identify the current row, because it appears that row objects can
disappear when doing a decoration update for example. This means that
comparing row pointers is not a good idea, because they can change
without notice.
* Stop calculations of horiz_scroll_offset_ variable, if metrics have not been
computed yet. Otherwise the calls to TextMetrics::parMetrics, calls
redoParagraph and may change the row heigths. Therefore vertical scrolling
feature may get disturbed. This is avoided.
* Using BufferView::::setCurrentRowSlice resets horiz_scroll_offset_
when changing cursor row. This is done in order to prevent unwanted
scrolling that happens when changing the selected row using up and
down arrow keys.
* Recompute inset positions before checking scoll offset of the row, by
painting the row insets with drawing disabled. This is done because the
position of insets is computed within the drawing procedure.
* Current x position of the text cursor is compared with the
horiz_scroll_offset_ value and the other variables like row.width(),
bv.workWidth(). Compute the new horiz_scroll_offset_ value in order
to show where the text cursor lies in. The basics conditions that we
check before recomputing it are, if the text cursor lies rightward to
the current right screen boundary, if the text cursor lies leftward
to the current left screen boundary, if the text cursor lies within
screen boundaries but the length of the row is less than the left
boundary of the screen (this happens when we delete some content of
the row using delete key or backspace key).
* Change update strategy when scrooll offset has changed. This allows to
redraw the row when no drawing was scheduled. By doing so, it was
possible to redraw a wide row when moving to the leftmost position of the
wide row, from the leftmost position of the row below, using the left
arrow key.
In TextMetrics::drawParagraph it is checked whether the current row is
what is drawing now. If it is so, the value used to the x value of the row
for drawing is adapted according to BufferView::horizScrollOffset.
The method used to pass boundary() was fixed to get row when cursor was in
a nested inset. This matter is considered in Cursor::textRow and it is
modified accordingly.
GuiWorkArea::Private::showCursor() is modified to show the cursor position
in a scrolled row.
This happens when part of the word is selected.
To reproduce:
1. Start a new document
2. Type "af"
3. Select 'a'
4. Observe that the right part of the 'f' is clipped away.
This patch uses QRegion to set a clip region that is everything except
the part that is drawn in another color.
Fixes: #9223.
This patch fixes a series of warnings like:
{{{
In file included from ../../master/src/mathed/InsetMathBoldSymbol.cpp:13:
In file included from ../../master/src/mathed/InsetMathBoldSymbol.h:15:
../../master/src/mathed/InsetMathNest.h:37:7: warning: 'lyx::InsetMathNest::metrics' hides overloaded virtual function [-Woverloaded-virtual]
void metrics(MetricsInfo const & mi) const;
^
../../master/src/insets/Inset.h:186:15: note: hidden overloaded virtual function 'lyx::Inset::metrics' declared here: different number of parameters
(2 vs 1)
virtual void metrics(MetricsInfo & mi, Dimension & dim) const = 0;
^
}}}
For a description of the problem, see for example:
http://stackoverflow.com/questions/18515183/c-overloaded-virtual-function-warning-by-clang
3 different strategies have been used:
* in frontend, some functions have been renamed.
* in InsetMath.h, Inset::write has been explicitly imported too
* in InsetMathNest.h, since a comment said that hiding Inset::metrics is intended, a special trick has bee used to silence the warning.
These are now in version.cpp. The build machinery should therefore make sure
that version.cpp is recompiled at every compilation.
These variables are now referred to by the other places that made use of __DATE__ and __TIME__.
A similar fix was reverted (453ce611) because of crashes.
The crashes occurred simply because of a failed check that
we have a buffer view before using it. That is now done in
this commit.
The below commit description is copied from the original
commit (fb05011a):
Empty selections can cause confusing behavior for a few reasons:
(1) some functions behave differently depending on whether there is a
selection. If I press delete, nothing happens (where I expect the
character or inset before the cusor to be deleted). If I toggle bold or
emphasize nothing happens (where if there is no selection the entire
word is toggled). There are other LyX functions that depend on whether
there is a selection or not. Further, I wonder if any part of LyX's code
assumes that if there is a selection it is non-empty.
(2) menu options are incorrectly set. For example, the scissors icon.
For remaining empty selection issues, see #9222.
For more information, see:
https://www.mail-archive.com/lyx-devel@lists.lyx.org/msg184758.html
The shape of the parbreak separator is slightly changed in order to
better distinguish it from the forced newline. This allows using the
same color of the plain version without risk of confusion.
Introduce the concept of pixel ratio: the ratio of physical and device independent pixels.
This is useful for rendering of content on Retina-displays of Mac hardware with high resolution.
Qt has real support for this starting with Qt5 - therefore it has to be compiled conditionally.
This change uses some work of Marcelo Galvão Póvoa, thank you.
This commit replaces almost all occurrences of Q_WS_WIN to comply
with Qt5. The remaining occurrences should *not* be replaced,
because the guarded code won't compile on Qt5.
The command line argument -geometry WIDTHxHEIGHT±XOFF±YOFF
specifies a preferred size and location for the main window.
Currently, this is semi-broken on Windows. Indeed, only
specifying WIDTH and HEIGHT places the main window such that
the left and top borders are invisible such that the window cannot
be moved. Moreover, the XOFF and YOFF parts (when present) are
used to specify the distance of the window from the left and top
or right and bottom edges of the screen, when using '+' or '-',
respectively. However, -geometry 800x600-20-20, instead of placing
the window such that its bottom and right edges are at a distance
of 20 pixels from the corresponding screen edges, places the
window such that its left and top borders are out of the screen.
This is corrected by this commit, which also addresses the fact
that Qt5 does not define Q_WS_WIN anymore.
Empty selections can cause confusing behavior for a few reasons:
(1) some functions behave differently depending on whether there is a
selection. If I press delete, nothing happens (where I expect the
character or inset before the cusor to be deleted). If I toggle bold or
emphasize nothing happens (where if there is no selection the entire
word is toggled). There are other LyX functions that depend on whether
there is a selection or not. Further, I wonder if any part of LyX's code
assumes that if there is a selection it is non-empty.
(2) menu options are incorrectly set. For example, the scissors icon.
For remaining empty selection issues, see #9222.
For more information, see:
https://www.mail-archive.com/lyx-devel@lists.lyx.org/msg184758.html
This branch implements string-wise metrics computation. The goal is to
have both good metrics computation (and font with proper kerning and
ligatures) and better performance than what we have with
force_paint_single_char. Moreover there has been some code
factorization in TextMetrics, where the same row-breaking algorithm
was basically implemented 3 times.
Globally, the new code is a bit shorter than the existing one, and it
is much cleaner. There is still a lot of potential for code removal,
especially in the RowPainter, which should be rewritten to use the new
Row information.
The bugs fixed and caused by this branch are tracked at ticket #9003:
http://www.lyx.org/trac/ticket/9003
What is done:
* Make TextMetrics methods operate on Row objects: breakRow and
setRowHeight instead of rowBreakPoint and rowHeight.
* Change breakRow operation to operate at strings level to compute
metrics The list of elements is stored in the row object in visual
ordering, not logical. This will eventually allow to get rid of the
Bidi class.
* rename getColumnNearX to getPosNearX (and change code accordingly).
It does not make sense to return a position relative to the start of
row, since nobody needs this.
* Re-implement cursorX and getPosNearX using row elements.
* Get rid of lyxrc.force_paint_single_char. This was a workaround that
is not necessary anymore.
* Implement proper string metrics computation (with cache). Remove
useless workarounds which disable kerning and ligatures.
* Draw also RtL text string-wise. This speeds-up drawing.
* Do not cut strings at selection boundary in RowPainter. This avoids
ligature/kerning breaking in latin text, and bad rendering problems
in Arabic.
* Remove homebrew Arabic and Hebrew support from Encoding.cpp. We now
rely on Qt to do handle complex scripts.
* Get rid of LyXRC::rtl_support, which does not have a real use case.
* Fix display of [] and {} delimiters in Arabic scripts.
The use of RLO/LRO overrides to force text orientation was really hackish and the way it was done caused dropped letters in Mac OS X (for some unknown reasons).
This new approach is much cleaner, except that it relies on features not advertised in documentation
but present at least from Qt 4.5 to Qt 5.3:
* TextFlag enum values TextForceLeftToRight and TextForceRightToLeft, which are strong versions
of QPainter::setLayoutDirection; they are passed as a parameter of QPainter::drawText.
* QTextLayout::setFlags method, which is required to pass the above flags to QTextLayout.
The unicode override method is still used to draw strings Mac OS X because, for some reason, the direction was not really enforced in this case.
This can only be done where splitting of string is identical in row breaking and display. It will be possible to reintroduce this when row painting uses the tokenized row information.
The option --enable-qt5 allows configuring for Qt5. The default is Qt4.
Nothing special is done with respect to Qt4, apart from pulling in the
correct libraries. Indeed, other than the core and gui libraries, now
also the concurrent and widgets libraries are needed.
This variable was introduced to guard against any bad consequence of the then-new right-to-left
languages support. Let's be bold and get rid of it altogether!
Now right to left support is always enabled.
The display of partially-selected word is now done in a new Painter::text method
which displays the string twice with different clip settings. This allows to
catter for the case where Color_selectiontext is not black.
Morover, the code that uses unicode override characters to force the
direction of a string is moved to lstrings.h.
Fixes: #9116
The old implementation of Row::Element::pos2x and x2pos did not work
correctly with Arabic text, because characters can have shapes that
depend on context.
This new implementation leverages QTextLayout in a simplified way,
since only one word is added to the layout.
This allows to make Row::Element::x2pos more readable.
Fixes: #9115.
Using a static variable here was premature optimization: fileNames() is only
called from GuiRef (directly or indirectly), and since this is a dialog the
copying of a FileNameList is not noticeable at all.
FileName::tempName() created a new temp file name by using qt to create a
temporary file with a unique name, and then deleting that file and returning
the name. This was unsafe, since other processes or even other threads of the
running LyX could create files with the same name between deletion and then
using the temp name.
This is fixed by using the TempFile class instead. As a side effect, a few
cases where the temp files were not deleted after usage were fixed as well.
The only place that is still unsafe is createTmpDir().
Thanks to maciejr we know now what the remaining problem was with bug 7954:
My unicode symbol fallback works fine, the problem was that a font named
"Symbol" is available on OS X, but it does not use the font-specific encoding
we expect: Almost all glyphs are at their unicode code point.
Therefore the bug is fixed by re-enabling the unicode workaround and blocking
the Symbol font on OS X.
Maximizing the document settings window when on the modules pane,
the horizontal space is now given to the module names and so no
scrollbar is needed. Before, even when maximized, a scrollbar was
sometimes needed because the horizontal space was given to the
buttons in the middle, which did not provide an extra benefit.
The default sizeType was "Expanding" and is now changed to "Minimum"
for the horizontal spacer above the middle buttons.
The firs tinvolves a thinko in BibTeXInfo::expandFormat. We were previously
counting passes through this routine, which means: one for every character,
more or less. So long strings would hit the "recursion limit". But what
we are worried about is an infinite loop caused by misues of macros, so that
is what we need to count.
This prevents the error we were previously getting, but it reveals a huge
slowdown when one tries to open a citation inset with a large nubmer of keys.
So we also limit the number of keys we try to process, and the length of the
string we try to display, when we are generating citation information.
I'm convinced that there is a deeper problem in how citation information is
generated (see the bug tracker for more info), but that will require major
surgery and a file format change
addPath() always adds a slash at the end, os got a double one before.
Qt and the OS are clever enough to understand that, but a single slash
looks more nice.
This has the advantage of simplifying our code and to produce the
correct output: the small capitals should have the exact same width as
the lower case letters.
The slanted fonts are also translated to oblique on Qt side, but this
does not seems to have an effect in my testing. It may be that proper
oblique fonts need to be installed.
* remove unused class TexStream.
* remove unused virtual method Inset::cellXOffset
* remove second argument of FileDialog constructor, which was actually
not used
* remove some dead local code
* remove some unused private members of classes
* in InsetMathNest::updateBuffer, fix the logic of a test
for possible thread conflicts, of the sort Georg resolved at
6a30211f. I have made static variables const where possible,
and marked cases that looked potentially problematic with the
comment:
// FIXME THREAD
Many of these definitely are vulnerable to concurrent access, such
as the static variables declared at the start of output_latex.cpp.
Suppose, e.g., we were outputting latex and also displaying the
source of a different document.
I'd appreciate it if others could grep for "FIXME THREAD" and see
if some of these are harmless, or what.
