The term LongTable has been deprecated and moreover the renaming makes the interface easier to the eye.
File format updated to 507. (conversion based on jamatos patch)
Layout format updated to 60.
tex2ylx tests updated.
Document EmbeddedObjects.lyx has been updated.
This fixes a failing unit test with 32bit gcc 4.9.3 and -O2 optimization:
It computed 9953 instead of 9954 for Length::inPixels() of value 2342.
The reason for this is probably different rounding behaviour caused by storing
the unrounded value in a processor register (uses 80bit accuracy) vs. writing
it back to memory (uses 64bit accuracy). The unrounded value is very close to
9953.5 (which is not representable as an exact IEEE floating point value).
Apart from that, having a proper function for rounding makes the code more
readable, and has the nice side effect to make Length::inPB() work for
negative lengths as well.
This concerns InsetPreview, InsetIPA and InsetMathHull.
Caching such a value is bad when opening the same buffer in two views.
In this case, it is not necessary to remember use_preview_ at all,
actually.
Also remove private member dim_ which is not used and remove some trailing whitespace.
Fixes bugs #9085 abd #9957.
Since the low-level version of tabular features is only called by the high-level one, it does not make sense to record undo there. It is much better to do it once in the high-level handler, rather than 37 times (yes!) at lower level when the tabular GUI calls tabular-feature with all the settings at once.
With large tables, this avoids to keep 37 copies of the table in Undo stack.
As an added bonus, this fixes bug #9960.
The tabular-features LFUN was merged with "inset-modify tabular" when
simplifying the tabular dialog at b5049e7. This choice later indirectly caused a
few regressions (#7308, #9794).
I reintroduce tabular-feature to allow more flexibility for user
commands, whereas "inset-modify tabular" is now reserved for the tabular
dialog. In particular, inset-modify tabular is no longer caught by math grid
insets. The name tabular-feature is kept to avoid renaming icons.
Known issues:
* After successfully applying a tabular command, the cursor is truncated to the
table.
* Note that the tabular dialog still has similar issues that are inherited from
the achitecture of the dialog menu. For instance the pref change can be
mis-dispatched to an inset inside a cell and cause an error, for instance:
Lexer.cpp (934): Missing 'Note'-tag in InsetNote::string2params. Got
tabular instead. Line: 0
Maybe the inset-modify LFUN should be modified to treat commands coming from
the wrong dialog (by checking the type) as unknown and undispatched so that
the parent can get it. In that case a non AtPoint variant of inset-modify
could be reintroduced in order to generalise tabular-feature. See:
http://mid.gmane.org/n4rdk1$efj$1@ger.gmane.org
External processes cannot access files which are open in LyX. Therefore the
temp files created by the external inset need to be closed right after
creation. The symptom was that the date inset did not produce any outout on
windows (bug 9925). This change reverts a small part of f09a9fe2.
Although the date inset is unimportant and will probably be removed, this
change is important for all external insets that make use of temp files.
The important thing is actually not the date inset, but the converter
machinery, which did convert the time stamps of two unused freshly created
temp files, which does not make sense, and did work before f09a9fe2 only by
accident.
This fixes the date inset on linuy, but not on windows, probably due to
different file locking semantics.
The current behaviour of the \origin parameter replaces relative file names
with the absolute original names if a document has been moved even if the
files have been moved as well. This behaviour is annoying e.g. for editing the
LyX docs in a git checkout.
Now file names are only replaced if the referenced file sdo not exist.
Preliminary work for addressing #7790. Thanks to Richard for providing initial
files this is based on.
Adding to TextClass:
OutlinerName <string> <string>
(the second string is translated)
e.g.:
OutlinerName thm "Definitions & Theorems"
Adding to Layout:
AddToToc <string> (default "", means no)
IsTocCaption <bool> (default 0)
e.g.:
AddToToc thm
IsTocCaption 1
Adding to InsetLayout:
AddToToc <string> (default "", means no)
IsTocCaption <bool> (default 0)
e.g.:
AddToToc literate
Adding to inset arguments:
IsTocCaption <bool> (default 0)
Although af8ba5e0fixed#9321, it broke a valid use case that was
reported by a user at #9785. Hopefully we can come up with a better
fix for #9321.
This reverts commit af8ba5e069.
(http://mid.gmane.org/565E17DD.7090008@clear.net.nz)
Fix the pilcrow and the cross in the outliner for Windows and old Ubuntus.
The thin space after the cross is based on aesthetics (in Ubuntu at least) after
trying both with and without a normal space. A thin space is already used for
display in BiblioInfo.cpp, so I presume it is safe.
Ideally, I prefer ❌ (CROSS MARK), whose description fits the purpose, over ✖
(HEAVY MULTIPLICATION X), which looks too bold in the UI. Whereas ✕
(MULTIPLICATION X, successfully tested in Windows by Andrew) looks too dim. But
❌ (CROSS MARK) is next to ❎ (NEGATIVE SQUARED CROSS MARK) so it might be as
problematic as the latter.
Do not output the cross on the author name in the toc of tracked changes.
The computation of the legth of expanded hfills did not take into account their unexpanded size. This is done now by increasing the dimension (+=) instead of merely setting it.
Moreover, since the insets sizes are integer number, rounding effects have to be taken in account. To this end, the extra number of pixels is added to the last hfill in the row.
This fixes part of bug #9860.
Note not everything is fixed by this patch: the logic of ParagraphMetrics::hfillExpansion seems bogus to me. I do not see why consecutive hfills at the beginning of a row should not be all expanded. Since I do not know what are the peculiarities of hfill handling in LaTeX, I did not change it (yet).
I did not either try to investigate the label hfill part, because I do not even know what is so special about it. I think there is a lot of old logic that nobody ever tried to question.
This is done by implementing contentAlignment() for this inset.
In order to display properly 'stretch' alignment, the code for TextMetrics::getAlign is rewritten to include some code that was in computeRowMetrics.
Back references in the format string of regex_replace use the syntax $n both
in std::regex and in boost::regex for the default format. Boost seems to
support the syntax \n in addition, but it is not documented at
http://www.boost.org/doc/libs/master/libs/regex/doc/html/boost_regex/format.html.
Therefore it is a good idea to use $n also for boost.
The code in InsetTabular disables the toolbar icons and menu entries related to vertical lines.
The code in GuiTabular disables vertical lines in the Settings dialog.
Note that there was a bug in
GuiSetBorders::set(Left|Right|Top|Bottom)Enabled, where the borders
did not get drawn correctly.
Fixes bug #9816
The horizontal alignment changes caused a regression for documents in older
formats. This could have been fixed by adding the following lines to the
format entry for 489 in development/FORMAT:
Previously, the horizontal position was ignored except for the
following parameter combinations:
- fixed width and type Boxed and without inner box
- fixed width and any type and with inner box and with makebox
Now, it is also used for the parameter combination below:
- makebox is not used and not (type Boxed and without inner box)
and a corresponding conversion to convert_BoxFeatures() in
lib/lyx2lyx/lyx_2_2.py. However, it was decided to revert the box alignment
changes instead: The box alignment can contradict the paragraph alignment. A
better way to avoid the additional space that can be created by paragraph
alignment (which was the motivation for implementing box alignment) is the
same as for table cells (see noTrivlistCentering() in src/Paragraph.cpp).
This would be a file format change and it is too late now for 2.2.0.
See http://www.mail-archive.com/lyx-devel@lists.lyx.org/msg188147.html for the
complete discussion (subject "Regression in lyx2lyx box alignment").
Please use the new function otexstream.append(str, texrow) to append an
odocstringstream with texrow information to the output when outputing to a
string buffer (e.g. case of subcaptions).
This was made visible by aab1b145a5, since xhtml export for
lib/doc/Additional.lyx caused an exception. However, the cause for this was
already present earlier: All attempts to output a std::string to an
odocstream resulted in trying to change the encoding of the stream instead,
since there is no operator<<(odocstream &, std::string) defined, and an
implicit conversion to SetEnc happened instead.
This is fixed by making the SetEnc constructor explicit and adjusting all
code parts that did not compile anymore after that. The parts of the code
that did use the wrong output operator were the std::string version of
htmlize() from output_xhtml.cpp and all changed parts in the other .cpp files.
I also removed the std::string versions of html::htmlize() and
html::cleanAttr(), since it was difficult to see which encodings were used
with these. Now we are always explcit when using html::cleanAttr() and
html::htmlize().
The rule-of-three says that if any of virtual destructor, copy constructor
or assignment operator needs to be manually implemented, then all three
should be implemented. Otherwise you can get subtle bugs which can be
difficult to find. In the changed classes, changing a copy-construction to
an assignment would have had surprising effects. Now they all behave
consistently.
Use the function support:truncateWithEllipsis() to shorten a docstring with
... at the end. Actually we use U+2026 HORIZONTAL ELLIPSIS instead of "..." when
automatically shortening strings. This is to be consistent with Qt's own
truncation and is much nicer on the screen.
This includes the bugs #9575 and #9572 regarding broken text elision in the
outliner.
Known issues (non-regressions):
* TocBackend::updateItem() should be rewritten to update all TOCs. (#8386)
* "..." should be replaced with … everywhere else on the interface (including
translation strings).
* We should prefer to rely on QFontMetrics::elidedText() to truncate strings
with an ellipsis whenever possible, or an equivalent for the buffer view
dependent on the font metrics. See the warning in src/support/lstrings.h.
* New TOC "math-macro". This means that math macros can now be accessed in the
outline pane in their order of appearance or in alphabetical order, and can be
searched using the filter.
* Lists of floats now show subfloats deeper in the navigation menu
* The arbitrary 30 element cut-off after which nothing is shown except "Open
Navigator..." is removed. Menus now have no limit in size, so Qt may display
them scrollable. In exchange, we always show "Open outliner..." at the
beginning. I tested for performance issues with a rather complex document and
it is fine; but this does not exclude corner cases with lots of TOC entries of
a certain kind. If necessary, populating the navigation sub-menu should be
delayed like the main menu.
* Elements that do not contribute to the output (e.g. in a note, a disabled
branch) are now preceded with a symbol indicating this status. (The machinery
was already there; I wonder why it was not implemented already.) I have chosen
U+274E NEGATIVE SQUARED CROSS MARK.
* Fix the contextual menus in the outliner (bug introduced at 94e992c5).
* Toc item now move to the caption when present, but first center on the float,
to prevent the situation where the caption is at the top of the screen and the
contents of the float is off-screen above the caption.
(Internally, the action of the toc items can now be customised)
* Fix the LyXHTML output. Disabled captions no longer appear in the list of
figures.
There are still a few warnings of the kind
(style) Variable 'x' is assigned a value that is never used.
since I did not touch code where I was not sure whether there might be a real
bug, and I kept some for symmetry reasons as well.
This generalises the new use of TocBuilder (97e8101) to listings and wraps and
removes some duplicate code.
Make sure that we will never write an empty float type again in the future
(#9760)
We introduce TocBuilder for building TOCs that take into account both float
insets and their captions.
* Floats without caption are shown with their content.
* Floats with a caption are shown with their caption, but clicking the entry now
correctly moves to the float and not to the caption.
* Subsequent captions produce additional entries in the TOC.
* Figures and subfigures are correctly ordered in the outliner.
* New TOC "senseless" for captions appearing alone (a bit like broken references
are still displayed in the menu and outliner).
* Disable LFUN_CAPTION_INSERT if there is already a caption in a listing
Known issues:
* Inconsistent output for includes located inside floats
* We should record the end of the float in addition of the beginning for a more
accurate cursor -> outliner entry conversion
