* src/paragraph.h: rename erase() to eraseChars()
for consistency with eraseChar()
* src/paragraph_pimpl.h: dito; merge the two erase() methods
* src/*.C: adjust properly
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15478 a592a061-630c-0410-9148-cb99ea01b6c8
* mathed/InsetMathXYArrow.C:
* mathed/InsetMathMBox.C: do not include non-existing MathMLStream.h
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15477 a592a061-630c-0410-9148-cb99ea01b6c8
changing between using it and the keyboard-cursor
movements.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15473 a592a061-630c-0410-9148-cb99ea01b6c8
* Buffer: new changed() boost::signal.
* LyXView:
- redrawWorkArea(): deleted
- bufferChangedConnection_: new signal connection
* LyXFunc: replace LyXView::redrawWorkArea() direct call with Buffer::changed() signal emission.
* WorkArea.C: deleted some comments about redrawWorkArea.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15464 a592a061-630c-0410-9148-cb99ea01b6c8
seems. ChangeTracking responsible please verify all
erase/eraseChar where we added false or where it is
called without changetracking bool (jug).
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15456 a592a061-630c-0410-9148-cb99ea01b6c8
- Do not use the nullpainter for the rows outside the screen, because the nullpainter does not calculate the width of text, and thus the metric entries in the inset cache are completely wrong, causing assertions when using for instance page up or page down into an inset. This fixes the dreading assertion on navigation in the user guide, and elsewhere
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15455 a592a061-630c-0410-9148-cb99ea01b6c8
* src/changes.h: pass Change and Range to ChangeRange constructor
* src/changes.C: adjust
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15448 a592a061-630c-0410-9148-cb99ea01b6c8
- Add debugging input
- If cursor::dispatch does not handle the func, then it should not request an update
- Dump metrics cache after redraw
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15443 a592a061-630c-0410-9148-cb99ea01b6c8
* paragraph.h: remove setChar(...); all text changes
must be expressed as erase and insert operations in
order to support change tracking
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15440 a592a061-630c-0410-9148-cb99ea01b6c8
I believe that it is for horizontal
"scrolling": If you have a table that is wider than the screen and you go
to a cell that is at the right edge then, if you are lucky, the table is
shifted to the left so that you can edit the cell and even go further
right. This does however not work reliably.
If I am right then the variable name scx_ would make some sense: sc for
scrolling. The ChangeLog comments also seem to point in this direction. And
most of them were done by Jürgen Vigna who is AFAIK in Denmark.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15414 a592a061-630c-0410-9148-cb99ea01b6c8
src/text2.C: invoke insertInset with correct
Change parameter; only check for change _type_
(DELETED) for DEPM purposes
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15406 a592a061-630c-0410-9148-cb99ea01b6c8
* src/rowpainter.C: check for change type equality, not
for equality of the compete Change objects
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15404 a592a061-630c-0410-9148-cb99ea01b6c8
* src/bufferparams.C: output authors no matter whether
we are in CT mode or not
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15402 a592a061-630c-0410-9148-cb99ea01b6c8
* src/mathed/MathParser.C
(parse1): behave correctly when a wrong delimiter is specified.
* src/mathed/InsetMathBig.C
(write): don't write a space before delimiter.
* src/frontends/qt4/QDelimiterDialog.C
(QDelimiterDialog): make translatable the string "Variable size".
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15397 a592a061-630c-0410-9148-cb99ea01b6c8
- Move lyx_server_ and lyx_socket destruction out of prepareExit() because those are only available when lyx::use_gui is true.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15394 a592a061-630c-0410-9148-cb99ea01b6c8
- Fix LaTeX export of User guide (the utf8 conversion buffer was too small)
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15390 a592a061-630c-0410-9148-cb99ea01b6c8
* insettext.[Ch]
(InsetText::covers): added to allow the click-sensitive area to grow
with the Wide() condition.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15384 a592a061-630c-0410-9148-cb99ea01b6c8
getCommand does not include the {} anymore, because \hfill has no arguments.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15379 a592a061-630c-0410-9148-cb99ea01b6c8
Known problems:
- No space is output after a \hfill. I probably broke this with the
InsetCommand patch. I'll have a look later.
- Although the encoding is now UTF8 the arguments of the inputenc package
are still the old ones, so LaTeX will not run.
- Labels and references with non-ASCII characters are broken. This needs to
be fixed in lyx::support::escape(), but this is a file format change.
- Something seems to be wrong with index entries, but this is probably also
due to the InsetCommand changes.
Have fun!
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15378 a592a061-630c-0410-9148-cb99ea01b6c8
* BufferView::updateMetrics(): add a big FIXME and don't clear out the coord_cache_.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15375 a592a061-630c-0410-9148-cb99ea01b6c8
- Polish the behavior when the TOC is empty (clearing the button and the TOC tree)
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15373 a592a061-630c-0410-9148-cb99ea01b6c8
Now, lyx is really ready for multiple LyXView. Just need to create an LFUN for it.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15370 a592a061-630c-0410-9148-cb99ea01b6c8
This commit also modifies the LyXFunc class. A LyXView is not needed any more at construction. Neither is the top level keymap. The LyXFunc key sequences are initialized only if we are in GUI mode (lyx::use_gui = true).
The next step is to rename LyXFunc::owner to LyXFunc::lyx_view_ and to put some BOOST_ASSERT. A classification between Gui and Kernel oriented LFUNs would also be welcome.
*LyX/lyx_main.[Ch]:
- LyX::Singletons: new private structure containing all the singletons (except the main LyX one of course).
- buffer_list_, top_level_keymap, session_: transfered to the LyX::Singletons structure.
* LyXFunc:
- LyXFunc: default constructor does not need any arguments.
- setupLocalKeymap(): deleted (was not used anywhere).
- initKeySequences(): new public method called from lyx_main.C, useful only in lyx::use_gui mode.
- new private member accessor methods
* Application:
- Application_pimpl: deleted (transfered to LyX)
- global singleton accessors: transfered to lyx_main.C
- start(): code transfered to LyX::priv_exec()
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15367 a592a061-630c-0410-9148-cb99ea01b6c8
* src/insets/insetcommandparams.[Ch]:
(operator[]): New, access a parameter
(clear): New, clear all parameters
(info_): New, stire info about this command
(cmdname): Rename to name_
(contents, options, sec_options): Replace with params_. Parameters
are now stored as docstring.
(findInfo): New factor for command info for all commands
(read, write): Use new syntax
(parameter set and get methods): reimplemenmt for new parameter storage
* src/insets/insetcommand.h
(getParam): New, get a parameter
(setParam): New, set a parameter
(parameter set and get methods): Adjust to InsetCommandParams changes
* src/insets/insetbibitem.[Ch]
(write): Remove, not needed anymore
(directWrite): ditto
* src/insets/insetbibitem.C
(InsetBibitem::read): Use InsetCommand::read
* src/insets/insetref.C
(InsetRef::latex): Use new InsetCommandParams interface
* src/mathed/InsetMathHull.C
(InsetMathHull::doDispatch): ditto
* src/text3.C
(LyXText::dispatch): ditto
* src/factory.C
(createInset): Create InsetCommandParams with command name
(readInset): ditto
(readInset): Remove error message for bibitem, since bibitem is
now a normal command inset
* src/buffer.C: Bump file format number
* src/frontends/controllers/ControlCommand.[Ch]
(ControlCommand): take an additional command name parameter
* src/text.C
(readParToken): Remove code for \bibitem
* lib/lyx2lyx/LyX.py: Bump latest file format number
* lib/lyx2lyx/lyx_1_5.py
(convert_bibitem, convert_commandparams): new, convert to new format
(revert_commandparams): new, convert to old format
* development/FORMAT: document new format
* many other files: Adjust to the changes above
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15357 a592a061-630c-0410-9148-cb99ea01b6c8
CoordCache & coord_cache = sl.text()->bv()->coordCache();
As you can see, I used this indirection to access the BufferView::CoordCache(). Bad luck, the passed CursorSlice was not completely valid inside a mathed inset, hence the crash. My solution is to pass BufferView to InsetBase::cursorPos() and all its derivative.
* InsetBase::cursorPos(): pass BufferView const &
* bufferview_funcs::coordOffset(): ditto.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15356 a592a061-630c-0410-9148-cb99ea01b6c8
* src/frontends/qt3/QDocumentDialog.C (updateNumbering): don't include headings
that have no counter in their label.
* src/frontends/qt3/ui/NumberingModuleBase.ui: show scrollbar when appropriate.
* src/frontends/qt4/QDocumentDialog.C (updateNumbering): don't include headings
that have no counter in their label.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15352 a592a061-630c-0410-9148-cb99ea01b6c8
The coordcahce is for up/down navigation and vconverting mouseclicks to text positions. It is not for pure display/export which
is what drawT is about. It was a simple oversight not to remove it after some copying from the 'real' draw() method.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15347 a592a061-630c-0410-9148-cb99ea01b6c8
* QToc::update(): return early if no TOC type.
* QTocDialog::updateGui(): return early of the Type model is empty and disable the outline buttons.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15346 a592a061-630c-0410-9148-cb99ea01b6c8
* src/buffer:
file format incrementation to 251
* src/insets/insetcharstyle.[Ch]:
- make show_label a param and save its state
- let all-insets-toggle togle the label in charstyles
* development/FORMAT:
document file format change
* lib/lyx2lyx/LyX.py:
add new file format
* lib/lyx2lyx/lyx_1_5.py:
remove char style label param on reversion to 250.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15345 a592a061-630c-0410-9148-cb99ea01b6c8
* lyx_main.h: define "extern bool lyx::use_gui" here.
* NoGuiFontMetrics.h: new class for command-line LyX
* NoGuiFontLoader.h: new class for command-line LyX
* Application.C:
- theFontMetrics(): returns the above dummy FontMetrics when use_gui is false.
- theFontLoader(): returns the above dummy FontLoader when use_gui is false.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15339 a592a061-630c-0410-9148-cb99ea01b6c8
(readInset): Add comment about citation commands
* src/tex2lyx/text.C
(known_jurabib_commands): remove fullcite since LyX does not know it.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15335 a592a061-630c-0410-9148-cb99ea01b6c8
* MathFactory.C:
- initMath(): revert change from r15327 because initSymbols() is needed for proper math parsing.
- math_font_available(): return false if lyx::use_gui is false.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15331 a592a061-630c-0410-9148-cb99ea01b6c8
* lyx_main.C:
- parse_export(): set lyx::use_gui to false.
* MathFactory.C:
- initMath(): initSymbols() only if lyx::use_gui is true.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15327 a592a061-630c-0410-9148-cb99ea01b6c8
theCoords is now a thing of the past and all CoordCache accesses are done via BufferView::coordCache() now. I had to modify a number of methods to pass BufferView.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15324 a592a061-630c-0410-9148-cb99ea01b6c8
* src/frontends/qt[34]/GuiApplication.C
(lyx::frontend::Application * createApplication): Don't return the
address of a temporary, but use the new operator.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15313 a592a061-630c-0410-9148-cb99ea01b6c8
* LyXFunc: new setLyXView() method
* LyXView::dispatch(): call LyXFunc::setLyXView() before lyx::dispatch()
What remains to be done is to ensure that every call to lyx::dispatch that is LyXView dependant is replaced with LyXView::dispatch().
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15308 a592a061-630c-0410-9148-cb99ea01b6c8
Only qt4 is guaranted to compile and work. I did not remove gtk and qt3 lyx_gui.C because they might be needed for reference to complete the header declarations in "GuiApplication.C".
- lyx_gui::use_gui transfered to lyx::use_gui in lyx_main.C
- all remaining lyx_gui functions transfered to Application and corresponding GuiApplication implementations.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15306 a592a061-630c-0410-9148-cb99ea01b6c8
- new buffer_list_ member and accessors
- implementation of theBufferList() extern function
* Application: remove everything related to BufferList
* lyx_cb.C: test for lyx::use_gui before using theApp.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15303 a592a061-630c-0410-9148-cb99ea01b6c8
export (e.g. the ToC) and the navigate menu.
* src/insets/insetbase.h
(InsetBase::plaintext): output to a docstream
(InsetBase::textString): ditto
* src/mathed/TextPainter.h
(TextPainter::show): ditto
* src/support/docstream.[Ch] New file and string streams for
docstring. The file streams convert to UTF8 on the fly.
* many more files: Adjust to the changes above
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15301 a592a061-630c-0410-9148-cb99ea01b6c8
Please don't forget to clean up includes and using directives.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15300 a592a061-630c-0410-9148-cb99ea01b6c8
* lyxfunc.h:
- theLyXFunc(): new function in the global namespace.
- lyx::dispatch(): new function in the lyx namespace.
- lyx::getStatus(): new function in the lyx namespace.
* bufferlist.h:
- theBufferList(): new function in the global namespace.
* Clipboard.h:
- theClipboard(): new function in the global namespace.
* Selection.h:
- theSelection(): new function in the global namespace.
* FontLoader.h:
- theFontLoader(): new function in the global namespace.
* FontMetrics.h:
- theFontMetrics(LyXFont const &): new function in the global namespace.
* Application.C: implements the functions defined above.
* LyXView.h:
- getLyXFunc(): deleted.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15298 a592a061-630c-0410-9148-cb99ea01b6c8
- text(): now returns drawn text width()
* rowpainter:
- paintChars(): use the returned width from Painter::text() instead of recalculating it.
All other files: implement the API change. qt3 and gtk not 100% guaranted to compile nor work.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15294 a592a061-630c-0410-9148-cb99ea01b6c8
* buffer.[Ch] (changeRefsIfUnique): extend to handle bibitems
as well (the function takes a InsetCode argument now);
clean up by using InsetIterator.
* InsetMathHull.C (doDispatch): changeRefsIfUnique needs a
InsetCode argument now (bug 2744).
* insetlabel (doDispatch): changeRefsIfUnique needs a
InsetCode argument now.
* insetbibitem (doDispatch): use changeRefsIfUnique
(actual fix for bug 2744).
* insetcommand.[Ch]:
* insetcite.[Ch]: implement replaceContents, which is
used by changeRefsIfUnique.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15289 a592a061-630c-0410-9148-cb99ea01b6c8
* controllers/Dialog.[Ch]
- View::title_ is now a docstring (ctor and access functions changed)
* controllers/ControlLog.[Ch]
- title() now returns a docstring
* controllers/ControlLog.[Ch]
- title() now returns a docstring
* qt4/*: adapted to above changes.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15283 a592a061-630c-0410-9148-cb99ea01b6c8
* lstrings.[Ch]: new docstring trim() function
* qt4/validators.C: PathValidator::validate() and printable_list() converted to unicode.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15281 a592a061-630c-0410-9148-cb99ea01b6c8
- getChangeAuthor() and getChangeDate(): converted to unicode.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15279 a592a061-630c-0410-9148-cb99ea01b6c8
* src/support/unicode.C
(iconv_convert): Use boost::uint32_t for storing a buffer character,
since the previously stored unsigned char is too small. I did not
use lyx::char_type on purpose because that might not be interpreted
as number, but as wide character if lyx::char_type == wchar_t.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15278 a592a061-630c-0410-9148-cb99ea01b6c8
- ucs4_to_qchar() and qchar_to_ucs4() have been inlined.
- ucs4_to_qstring(): pass a QString to avoid a copy.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15266 a592a061-630c-0410-9148-cb99ea01b6c8
Basically, I replaced all methods in the font_metrics namespace by a proper virtual interface FontMetrics. The FontLoader is _the_ container for FontMetrics.
This patch should also bring some optimizations in a number of place in the code. This is because we do not need any more to search for the LyXFont at each font_metrics call. In effect, the speed advantage is not as sensible and this is a bit deceiving considering that this was my primary motivation behind the patch. But I like the patch anyway as it cleans up the relation and interfacing between fonts, metrics and frontends.
* frontends/FontMetrics.h: new virtual interface. Renamed from font_metrics.h
* qt4/GuiFontMetrics: corresponding qt4 implememtation. Renamed from qfont_metrics.C. The smallCaps particular case treatment has been transfered here as well as the width cache for MacOSX and Windows.
* qt4/QLPainter.C: the smallCapsText has been reworked to return the width of the drawn text.C
all other files: replace font_metric helper function call with corresponding FontMetrics method calls.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15265 a592a061-630c-0410-9148-cb99ea01b6c8
* rename output_changes to outputChanges
* rename tracking_changes to trackChanges
* add FIXMEs for later revision
* remove trackChanges(); the CT data structure will always be set up
* decouple LFUNs changes-output/change-accept/change-reject/
all-changes-accept/all-changes-reject from LFUN changes-track
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15261 a592a061-630c-0410-9148-cb99ea01b6c8
* lib/ui/stdmenus.ui: move math text styles from
menu "insert" to menu "edit"
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15246 a592a061-630c-0410-9148-cb99ea01b6c8
* src/mathed/InsetMathSplit.C
(InsetMathSplit::validate): Only require amsmath for AMS stuff
* src/mathed/MathFactory.C
(createInsetMath): create InsetMathSplit if the latexkey is "split"
* src/mathed/MathParser.C
(Parser::parse1): remove "gathered" and "aligned", since these are
now handled via lib/symbols
(Parser::parse1): create InsetMathSplit if the latexkey is "split"
* lib/symbols: Add aligned, gathered, lgathered and rgathered
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15224 a592a061-630c-0410-9148-cb99ea01b6c8
* frontends/FontLoader.h: new interface class.
* frontends/Application.h: new FontLoader() pure virtual method
* frontends/lyx_gui: update_fonts() and font_available() methods deleted
* [qt3/qt4/gtk]/GuiApplication: implement the new interface
* qt4/GuiFontLoader:
- renamed from FontLoader
- now derives from FontLoader
- now in the lyx::frontend namespace
* qt3/qfont_loader
- now derives from FontLoader
* gtk/xftFontLoader
- now derives from FontLoader
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15220 a592a061-630c-0410-9148-cb99ea01b6c8
* lyx_main.C and lyx_cb.C: use Application methods directly instead of the above functions.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15211 a592a061-630c-0410-9148-cb99ea01b6c8
* src/support/fontutils.C:
Undefine the min and max macros if they are defined
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15210 a592a061-630c-0410-9148-cb99ea01b6c8
virtual std::string const romanFontName() = 0;
virtual std::string const sansFontName() = 0;
virtual std::string const typewriterFontName() = 0;
My goal is to transfer all of "frontends/*/lyx_gui.C" to "frontends/lyx_gui.C". When this is done, "frontends/lyx_gui.C" can go altogether as its functions will then be replaced with direct calls to theApp->XXX().
* frontends/lyx_gui.C: new file with code transfered from [qt3,qt4,gtk]/lyx_gui.C
* frontends/Application: 3 new font related pure virtual methods
* [qt3,qt4,gtk]/GuiApplication: implement the above method with code transfered from lyx_gui.C
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15208 a592a061-630c-0410-9148-cb99ea01b6c8
* src/insets/insetgraphics.C
(findTargetFormat): return pdf for vector graphics
* src/format.h
(Flags): new enum describing format flags
(flags_): new member variable for format flags
(vectorFormat): new, tell whether a format can contain vector graphics
* src/format.C: adjust to flags changes
* src/frontends/qt[34]/QPrefsDialog.C
(QPrefsDialog::QPrefsDialog): handle new vector flag
(QPrefsDialog::switch_format): ditto
(QPrefsDialog::updateFormatsButtons): ditto
(QPrefsDialog::new_format): ditto
(QPrefsDialog::modify_format): ditto
* src/frontends/qt3/ui/QPrefFileformatsModule.ui
* src/frontends/qt4/ui/QPrefFileformatsUi.ui
(vectorCB): new checkbox for vector flag
* src/lyxrc.C
(LyXRC::read): read vector flag
(LyXRC::write): write vector flag
* lib/doc/Customization.lyx: document format flags
* lib/configure.py
(checkFormatEntries): Add vector flag to some formats
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15205 a592a061-630c-0410-9148-cb99ea01b6c8
Now we write again \begin{align} instead of \begin{4} to .lyx and .tex.
* src/mathed/InsetMathHull.C
(InsetMathHull::header_write): write type name, not type_.
Use switch instead of if for better readability.
(InsetMathHull::footer_write): ditto
(InsetMathHull::mutate): write type name, not type_
(InsetMathHull::normalize): ditto
(InsetMathHull::infoize): ditto
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15204 a592a061-630c-0410-9148-cb99ea01b6c8
* src/support/fontutils.C:
Undefine the min and max macros after inclusion of windows.h on cygwin.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15203 a592a061-630c-0410-9148-cb99ea01b6c8
* src/frontends/qt4/GuiView.C
(setGeometry): replace test for Q_OS_WIN32 with Q_WS_WIN
* src/support/fontutils.C:
If X_DISPLAY_MISSING is defined, compile the code for Win32
on cygwin, too.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15201 a592a061-630c-0410-9148-cb99ea01b6c8
A trivial (looking) patch to correct inset behavior, which is broken
with revision 15068. Without this patch, it is not possible to modify
an existing inset. All modifications processed as new index. (see
lyxfunc.C:1420)
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15199 a592a061-630c-0410-9148-cb99ea01b6c8
These font related functions were identical for qt3 and qt4. They are not Qt dependent at all and could also apply to an eventual Win32 or MacOSX gtk port.
Jen-Marc says: It would be nice to convince fontconfig to do the same for linux.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15196 a592a061-630c-0410-9148-cb99ea01b6c8
* src/mathed/InsetMathHull.C
(InsetMathHull::doDispatch): move code for ref insert to InsetMathNest
(InsetMathHull::getStatus): move code for ref insert to InsetMathNest
* src/mathed/InsetMathNest.C
(InsetMathNest::doDispatch): move code from InsetMathHull here
(InsetMathNest::getStatus): move code from InsetMathHull here
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15189 a592a061-630c-0410-9148-cb99ea01b6c8
* gtk/qt3/qt4/GuiApplication: createView() method deleted
* LyXView:
- init(): is now a pure virtual method. autoSave code transferred to constructor and updates to the frontends.
- setGeometry(): new pure virtual method
* gtk/GView, qt3/QtView, qt4/GuiView: adapted to above change
- setGeometry(): code transfered from GuiApplication
* lyx_main.C: call LyX::ref().addLyXView() in there instead of in Application::createView()
*
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15183 a592a061-630c-0410-9148-cb99ea01b6c8
addWithStatus(). It also replaces LyXView uses with BufferView as none of the LyXView feature were used.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15181 a592a061-630c-0410-9148-cb99ea01b6c8
* src/insets/insettabular.C
(InsetTabular::getStatus): enable COPY_ROW and COPY_COLUMN features
(InsetTabular::tabularFeatures): handle COPY_ROW and COPY_COLUMN
* src/tabular.h
(TabularFeature): add COPY_ROW and COPY_COLUMN
* src/tabular.[Ch]
(LyXTabular::copyRow): new method, copy a row
(LyXTabular::copyColumn): new method, copy a column
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15173 a592a061-630c-0410-9148-cb99ea01b6c8
* BufferView
- layoutChanged: new boost signal.
- LyXView owner(), owner_: deleted
* text3.C
- emit BufferView::layoutChanged instead of calling LyXView::setLayout directly
- LFUN_MOUSE_RELEASE: delete LyXView updateMenubar() and updateToolbars() direct calls.
The update is of both bars is done in WorkArea::dispatch().
* WorkArea.C
- dispatch(): add LyXView updateMenubar() call.
* LyXView
- connects to BufferView::layoutChanged directly to Toolbars::setLayout()
- setLayout(): deleted.
* qt4/GuiImplementation: modify BufferView construction (without LyXView).
All other files: cleanup header declaration of LyXView.h
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15153 a592a061-630c-0410-9148-cb99ea01b6c8
(only on windows).
* src/frontends/Dialogs.C
(Dialogs::hide): Don't send the signal if we are quitting
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15116 a592a061-630c-0410-9148-cb99ea01b6c8
Most of qt3 and gtk should stay compilable except for LyXView.h because the LyXFunc instance has been transferred to Application.
* frontends/Application: new class aimed to be the one unique interface between the frontend and the kernel. Contains one global pointer to the unique instanciation theApp.
* frontends/qt4/GuiApplication: renamed from qt4/Application, the qt4 specialisation of the Application class. Contains one global pointer to the unique instanciation guiApp (equal to theApp but pointing to a GuiApplication instead).
* frontends/qt4/lyx_gui.C: most of the code has been moved to Application and GuiApplication
All other file: adapted to new API.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15114 a592a061-630c-0410-9148-cb99ea01b6c8
The associated WorkArea is then responsible to connect these signals to its LyXView parent.
* BufferView:
- showDialog, showDialogWithData, showInsetDialog: new boost signals
* LyXView:
- connectBufferView(), disconnectBufferView(): new method in charge of the connection/disconnection of the above signal to associate private methods (showDialog(), etc).
* WorkArea
- setBufferView(): will connect/disconnect the BufferView to its LyXView parent.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15068 a592a061-630c-0410-9148-cb99ea01b6c8
* src/CutAndPaste.C (pasteSelectionHelper): pass Cursor
as argument, remove cursor-dependent arguments,
implement method to reset layout in insets which
forceParagraphsToDefault.
* src/CutAndPaste.C (pasteParagraphList): adapt call of
pasteSelectionHelper.
* insets/insetbox.C (doDispatch):
* insets/insetert.C (doDispatch):
* insets/insetcharstyle.C (doDispatch):
* insettext.[Ch] (forceParagraphsToDefault):
remove ad-hoc-Code to
reset paragraph layout.
This is now done generally in CutAndPaste.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15062 a592a061-630c-0410-9148-cb99ea01b6c8
No scons and cmake support! scons and cmake need to find out the size of
wchar_t and define this macro in config.h (example for 32bit wchar_t):
* The size of a `wchar_t', as computed by sizeof. */
#define SIZEOF_WCHAR_T 4
* configure.ac: Test size of wchar_t
* src/support/types.h: don't include docstring.h anymore.
Use wchar_t as lyx::char_type if it is 32 bit wide.
* src/support/docstring.h: Use lyx::char_type for defining docstring
* src/metricsinfo.h: include support/docstring.h instead of
support/types.h
* src/lyxlex.h: ditto
* src/frontends/font_metrics.h: ditto
* src/frontends/qt4/qt_helpers.h: ditto
* src/frontends/Painter.h: ditto
* src/errorlist.h: ditto
* src/support/lstrings.h: ditto
* src/lyxfunc.h: ditto
* src/LaTeX.h: ditto
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@14991 a592a061-630c-0410-9148-cb99ea01b6c8
(QLPopupMenu::populate): Don't append a lyx::char_type to a qstring
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@14988 a592a061-630c-0410-9148-cb99ea01b6c8
* src/insets/insettabular.C (getStatus):
* src/insets/insettext.C (doDispatch,getStatus): remove special code
for LFUN_INSET_DISSOLVE.
* src/text.C (dissolveInset): new method.
(erase, backspace): use dissolveInset.
* src/text3.C (dispatch): use dissolveInset for LFUN_INSET_DISSOLVE.
(getStatus): disable LFUN_INSET_DISSOLVE if the inset has more than one cell.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@14940 a592a061-630c-0410-9148-cb99ea01b6c8
LyXText at cursor position is the same as LyXText at
cursor.selBegin() position. Fixes a crash (bug 2600).
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@14936 a592a061-630c-0410-9148-cb99ea01b6c8
* src/frontends/controllers/ControlMath.C
(latex_misc): Add intop and ointop
* lib/images/math/intop.xpm: New
* lib/images/math/ointop.xpm: Ditto
* lib/images/math/int.xpm: Add box to make the difference to intop clear
* lib/images/math/oint.xpm: ditto
* lib/Makefile.am: add new files
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@14924 a592a061-630c-0410-9148-cb99ea01b6c8
* src/support/unicode.C
(bytes_to_ucs4): make it work on big endian machines
(bytes_to_ucs2): make it work on little endian machines
(ucs2_to_ucs4): ditto
(utf8_to_ucs4): Invoke iconv with explicit BE suffix
(ucs2_to_ucs4): ditto
(ucs4_to_ucs2): ditto
(ucs4_to_utf8): ditto
* configure.ac: Check for byte order
* development/scons/SConstruct: Ditto
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@14890 a592a061-630c-0410-9148-cb99ea01b6c8
* Dialogs::disconnect(string const & name): check if the dialog is an inset before resetting open_insets_
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@14889 a592a061-630c-0410-9148-cb99ea01b6c8
isLetterChar(): verify also that this is a one-byte char (<256).
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@14877 a592a061-630c-0410-9148-cb99ea01b6c8
* src/frontends/qt[34]/qt_helpers.[Ch]
(toqstr): add variant for docstring
(qstring_to_ucs4): Use docstring and port from qt4 to qt3
* Many other files: Many std::string -> lyx::docstring conversions
* src/support/lstrings.[Ch]
(subst): Add variant for docstring and char_type
(externalLineEnding): std::string -> lyx::docstring
(internalLineEnding): std::string -> lyx::docstring
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@14871 a592a061-630c-0410-9148-cb99ea01b6c8
* src/mathed/math_symbolinset.C
(void MathSymbolInset::maxima):
- newer maxima versions use inf instead of INF
- add support for greek pi
(void MathSymbolInset::mathematica):
- add support for \cdot
* src/mathed/math_stringinset.h
- account for the const version of asStringInset()
* src/mathed/math_extern.C
(bool extractScript):
- added bool superscript to formal parameters in order
to only extract superscripts
(MathArray::iterator extractArgument):
- leave out delimiters and a possible superscript
for function arguments
(bool isKnownFunction):
(bool extractFunctionName):
- recognize standard and user defined function names
(void splitScripts):
- correctly split scripts as expected by other functions
(MathAtom replaceDelims):
- ranamed as replaceParenDelims
(bool testOpenBracket):
(bool testCloseBracket):
- test for "[" and "]", respectively
(MathAtom replaceBracketDelims):
- replace something delimited by "[" and "]" with a
proper DelimInset
(void extractDelims):
- create a DelimInset for "[" and "]" delimiters, too
(void extractFunctions):
- improved recognition of function names
(bool testTermDelimiter):
- test for '+' or '-' as term delimiters
(MathArray::iterator extractTerm):
- extract a "term", i.e., something delimited by '+' or '-'
(bool testDiffItem):
- improved recognition of a "differential fraction"
(void extractDiff):
- call splitScripts() on numerator and denominator of a
differential fraction before analyzing them
(void extractLims):
- improved recognition of a limit function
(void extractStructure):
- reorganized order of searches
(MathArray pipeThroughMaxima):
- newer versions of maxima use simpsum instead of SIMPSUM
(string fromMathematicaName):
- translates from mathematica names
(MathArray pipeThroughMathematica):
- calls mathematica and collects its output
(MathArray pipeThroughExtern):
- add support for mathematica
* src/mathed/math_numberinset.C
* src/mathed/math_numberinset.h
(void MathNumberInset::mathematica):
- add support for mathematica
* src/mathed/math_matrixinset.C
* src/mathed/math_matrixinset.h
(void MathMatrixInset::mathematica):
- add support for mathematica
* src/mathed/math_diffinset.C
* src/mathed/math_diffinset.h
(void MathDiffInset::maxima):
- add support for maxima
(void MathDiffInset::mathematica):
- mathematica uses "D" and not "Dt" for normal derivatives
* src/mathed/math_liminset.C
* src/mathed/math_liminset.h
(void MathLimInset::maxima):
- add support for maxima
(void MathLimInset::mathematica):
- mathematica uses "Limit" and not "Lim" for limits
* src/mathed/math_exfuncinset.C
(string asMathematicaName):
- added some more function names
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@14865 a592a061-630c-0410-9148-cb99ea01b6c8
* src/support/docstring.[Ch]
(from_ascii): new conversion function
(from_utf8): new conversion function
(to_utf8): new conversion function
(operator==) new, compare docstring and ASCII C string
(operator!=) new, compare docstring and ASCII C string
* src/support/Makefile.am: add new file docstring.C
* development/scons/scons_manifest.py: ditto
* src/funcrequest.[Ch]
(argument): change name to argument_ and type to docstring,
add an accessor
(FuncRequest): Add two new constructors taking a docstring argument
* all other files: adjust to the FuncRequest changes above
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@14861 a592a061-630c-0410-9148-cb99ea01b6c8
In src/support/os_cygwin.C path styles are converted (when needed) from
one style to another. I discovered a couple of cases in which an
unnecessary conversion takes place.
The default output path style in external_path is windows because this
function is also used when adding fonts though a native Windows API call.
However, this call is not made in an X11 build, so it is not necessary
that the output path style is windows.
Log:
Small fixes for cygwin.
* os_cygwin.C (is_windows_path): avoid unnecessary conversion
when path is relative
(convert_path_list): avoid unnecessary conversion when path
list is empty
(external_path): for an X11 build it is not necessary that
the output path style is windows
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@14859 a592a061-630c-0410-9148-cb99ea01b6c8
* qfont_metrics.C: make use of above methods instead of those in unicode.[Ch]
* QLPainter.C: ditto
* QLyXKeySym.C: ditto + simplification and a BOOST_ASSERT that verifies that the event is one char only.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@14852 a592a061-630c-0410-9148-cb99ea01b6c8
catch exception thrown by boost::filesystem if copying to the
backup directory fails (fixes bug 2740: crash and dataloss if
the backup dir was invalid or not writeable).
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@14849 a592a061-630c-0410-9148-cb99ea01b6c8
* src/frontends/qt4/GuiWorkArea.C
(GuiWorkArea::dropEvent): Use toLocalFile instead of toString,
because toString omits the first backslash of UNC paths.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@14846 a592a061-630c-0410-9148-cb99ea01b6c8
* LyXView: save two setLayout() calls that are done in updateLayoutChoice() anyway.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@14833 a592a061-630c-0410-9148-cb99ea01b6c8
* src/tex2lyx/text.C
(known_spaces): new, LaTeX names of known spaces
(known_coded_spaces): new, LyX names of known spaces
(parse_text): Recognize all known spaces
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@14832 a592a061-630c-0410-9148-cb99ea01b6c8
element (like {a'}^{2}). (froward port from 14802)
* src/mathed/math_nestinset.C (script): when creating a script
inset, handle specially previous atom if it is a MathBraceInset
(this is used in interactive input).
* src/mathed/math_parser.C (parse1): when creating a script inset,
handle specially previous atom if it is a MathBraceInset (this is
used in parsing phase).
* src/mathed/math_scriptinset.C (write): put nucleus into braces
if it contains more than one element or is itself a script inset.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@14819 a592a061-630c-0410-9148-cb99ea01b6c8
Log:
* lyxfunc.C:
- LyXFunc::dispatch(): put some save guards before using
BufferView::cursor() and sendDispatchMessage().
* BufferView_pimpl.C
- BufferView::Pimpl::setBuffer(): return before if exiting.
* WorkArea.C:
- WorkArea::redraw(): update the toolbar when greying out.
* LyXView.C:
- LyXView::setBuffer(): sanitization
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@14815 a592a061-630c-0410-9148-cb99ea01b6c8
* src/frontends/qt4/Action.C (Action): do not set entry to
checkable by default; invoke update() to set it up.
(update): only set checkable property if needed.
* src/frontends/qt4/QLPopupMenu.C (populate): in the case of
a Command menu item, let Action set itself up.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@14811 a592a061-630c-0410-9148-cb99ea01b6c8
if the bib file is in a non-readable directory (bug 2782).
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@14807 a592a061-630c-0410-9148-cb99ea01b6c8
in the text.
* src/insets/insetbase.h (notifyCursorLeaves): return a bool
indicating whether cursor is invalidated.
* src/mathed/math_nestinset.C (notifyCursorLeaves):
* src/mathed/math_hullinset.C (notifyCursorLeaves): adapt to
prototype change.
* src/mathed/math_scriptinset.[Ch] (notifyCursorLeaves): return
true when an inset has been deleted.
* src/BufferView.C (mouseSetCursor): do not call dEPM when cursor
is invalidated by notifyCursorLeaves.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@14796 a592a061-630c-0410-9148-cb99ea01b6c8
* math_scriptinset.C (notifyCursorLeaves): call recordUndoInset
before deleting a cell; if the nucleus does not have scripts
anymore, delete it and replace it by its contents at enclosing
level.
(write): output scripts even when they are empry.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@14793 a592a061-630c-0410-9148-cb99ea01b6c8
* config/lyxinclude.m4: reset release date for development versions.
* src/version.C.in: make lyx_release_date a placeholder.
* src/lyx_main.C (parse_version):
* src/frontends/controllers/ControlAboutlyx.C (getVersion): change a
bit the display of LyX release date.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@14712 a592a061-630c-0410-9148-cb99ea01b6c8
* src/support/package.C.in: use PATH_MAX instead of MAX_PATH
* INSTALL.scons: add instruction for building qt3 2ith msvc
* development/scons/SConstruct: use the right lib (qt-mt3) and manifest file
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@14709 a592a061-630c-0410-9148-cb99ea01b6c8
* src/CutAndPaste.C (setSelectionRange, replaceWord): remove.
(replaceSelectionWithString): select the new string after
replacement; add a bool parameter indicating in which sense the
selection is made.
* src/lyxfind.C (replace): adapt to above changes.
(find): comment out debug message.
* src/frontends/controllers/ControlSpellchecker.C (isLetter):
rename parameter.
(nextWord): take a LCursor as parameter; set the selection over
the word that has been found.
(check): adapt to changes above (the length of the word is not
necessarily the length of the selection -- fixes bug 2068).
(replace): use cap::replaceSelectionWithString
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@14708 a592a061-630c-0410-9148-cb99ea01b6c8
LFUN_GOTOERROR.
* src/bufferview_funcs.C (findInset): exit early when at end of
document (and avoid a crash).
* src/insets/insetbase.[Ch]: remove ERROR_CODE
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@14706 a592a061-630c-0410-9148-cb99ea01b6c8
Log:
* BufferView/pimpl:
- scrollDocView(): call to BufferView::update() deleted.
- scrollDocView(): second part is now in setCursorFromScrollbar()
- setCursorFromScrollbar(): new method.
* WorkArea:
- setBufferView(): show the cursor immediately
- redraw(): call to updateScrollbar()
- updateScrollbar(): new method
- scrollBufferView(): fix it and show the cursor immediately.
* qt4/GuiWorkArea
- setScrollbarParams(): now disable the Qt scrollbar tracking.
- paintEvent(): scrollbar related code deleted
* qt3/QWorkArea
- setScrollbarParams(): now disable the Qt scrollbar tracking.
* qt3/QContentPane
- paintEvent(): scrollbar related code deleted
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@14704 a592a061-630c-0410-9148-cb99ea01b6c8
