- the column width must be as wide as the column header text
- also center the radiobuttons in the table
- also use alternating colors for the table rows
Instantiating a single QSettings and using it for each ui element
can significantly shorten the time required to save the various
states at exit. The speed up can be better appreciated on *nix,
where the settings are saved on disk, rather than on Windows where
they are held in memory (in the registry).
The current spelling is not strictly wrong, but flagged as unusual or
historical by some authorities. It is also found fault with many
spell checkers. Thus we decided to move to the more standard "-ible"
form once and for all.
See #10678 for discussion
This part covers the most tricky part: the internal naming.
Translations and layouts will follow.
This will all also all be backported to 2.3.x, for the sake of backwards
compatibility (cherry-picking).
* Describe the viewport/bb situation more accurate
* Use generic term "coordinates", since bb and viewport are flavor-specific
* Add some tooltips
* Increase the width of the options widget.
This replaces a showCaret/hideCaret pair and avoids an update.
Also remove an update() call in resizeBufferView: is is not necessary
since we are already in a pintEvent handler.
Replace the tricky code in LFUN_SCREEN_FONT_UPDATE and replace it with
proper use of DispatchResult flags.
LFUN_BUFFER_ZOOM* does not need to call LFUN_SCREEN_FONT_UPDATE, since
it already does everything that is required.
This avoids endless resize issues on HiDPI systems (e.g. Retina Mac).
Rename pixel_ratio_ to last_pixel_ratio_ to emphasize that this is a
cached value.
Inline needResize method to make the logic clearer in paintEvent.
Remove the old schedule_redraw_ mechanism that was only useful because
of our synchronous drawing code. Now that actual painting is
scheduled instead of forced, it becomes pointless.
Rename WorkArea::redraw(bool) to scheduleRedraw(bool), to show that
the drawing is not done right away.
In GuiView::updateInset, call scheduleRedraw(true), so that metrics
are correctly computed (this was the whole point of the exercise).
This change solves dialog stacking problems on newer Mac OS X in combination with the OS provided file open dialog.
(cherry picked from commit 97dc585138)
Now painting the workarea is done at paint events as should be.
Explicit painting after updating metrics has been replaced by a much
lighter procedure (updatePosCache) to update the insets positions cache.
Expected benefits:
- better performance
- proper use of subpixel aliasing
The LyXRC variable use_qimage is not needed anymore and is therefore removed.
This unbreaks input methods by splitting the part of the code that
does the actual drawing to a separate paintPreeditText() method which
is called from paintEvent().
The proper solution would have been to introduce the preedit string in
the Row object, like is done for completion, but this is too complex
to do at this point.
The only change in behavior is that now the commit string is inserted
in one fell swoop, intead of emulating a number of key events.
Rename cursor to caret to in order to avoid ambiguity. The caret is
now the blinking thing only.
Remove unused header contents, and some not so useful methods.
No intended change of behavior.
The trick is to remember in BufferView what has been done at the
previous draw, so that the row that contained the caret can be
repainted if needed.
To this end, add an argument paint_caret to BufferView, although
painting the caret is not the job of the BufferView (at this point).
BufferView::needRepaint will act as an interface with
TextMetrics::drawParagraph to know whether the painting of a given
row should be forced.
Currently everything is done at the top row level, so that, if the
caret is in a large table, the whole table will have to be repainted.
It is not clear yet that this is necessary.
Historically, because of two-stage drawing, LyX has been painting on a
Pixmap, and this pixmap is copied to screen at paint event time.
Now that we have three-stage drawing, it is possible to delay the
painting to actual paint event and avoid the intermediate Pixmap.
Known bug: the cursor is never erased.
Normally the two stages of drawing are
1/ compute metrics of insets/rows/paragraphs/mathrow...
2/ draw the elements and cache their positions
Now the three stages are
1/ metrics
2/ nodraw: do not draw the elements, but cache their position
3/ draw the elements (and store again their position; it does not
seems to hurt performance).
Revive the NullPainter: this replaces the setDrawingEnabled mechanism
with a painter that does nothing. The advantage is that updatePosCache
(renamed from setPosCache) does not need anymore to be invoked from
the frontend.
updatePosCache (the nodraw stage) is called at the end of
BufferView::updateMetrics.
It was not a good idea to rely on QTextLine::naturalTextWidth() to
compute a string width. The correct method is horizontalAdvance().
Also round the value to the nearest pixel, since this is what
QFontMetrics::width() does.
Fixes bug #10700 (and maybe others).
Dispatching LFUN_BUFFER_ZOOM inside of GuiView::restoreLayout() was
blocked in some cases because the function can be called without a
buffer (and the LFUN is marked as needing a buffer). Instead of
conditioning on a buffer, the call is removed because in testing it
does not appear why it is needed.
This commit removes the status message that is displayed if starting
LyX without opening a buffer:
"Command not allowed without any document open"
See discussion at:
https://www.mail-archive.com/search?l=mid&q=20170718084344.3kjmu7hzoyajt7vd%40steph
This commit amends 4183a9f4.
Due to its peculiarity of not being saved in the document, the
shell escape setting was applied immediately without the need
for hitting the Apply or OK buttons. However, for uniformity
sake, it is better to adhere to the established paragdim of
confirming any changes before applying them.
Allow a LaTeX backend to run external commands after user confirmation.
This is a per document and per machine setting. The authorization has
to be given through the document settings pane, but is not recorded in
the document itself. Moving the document to either another computer or
another directory on the same computer revokes the authorization.
This can also be done by right clicking the red icon that appears in
the status bar when a document is marked as one requiring shell escape.
The patch also checks whether the user has added the -shell-escape
option to a LaTeX converter and nags the user to remove the option
(which would be used for all documents) in favor of the (per document)
support offered by LyX.
- Do not warn when the document properties pane is opened but only
when minted is selected and the pygmentize command was not found.
- Warn before launching latex if minted is selected and the document
actually uses listings insets.
QSignalBlocker in updateScrollbar is too strong and prevents the scroll bar from
communicating with its scroll area. The only solution to block signals between
specifically between two objects is to disconnect. This makes sense in this
case, by making updateScrollbar responsible for managing the connection in the
first place.
Traditionally LyX behaves differently when the directive DEVEL_VERSION
is defined at compile time. This covers
* more detailed description of current position in status bar
* the help files are open in read/write mode
* more detailed debug output in the View Source panel
This patch introduces the new function devel-mode-toggle that allows
to use devel mode in stable releases, and vice versa.
The information is saved in the session file. The default is to
disable devel mode.
Remove all traces of DEVEL_VERSION in autoconf and cmake
This commit does a bulk fix of incorrect annotations (comments) at the
end of namespaces.
The commit was generated by initially running clang-format, and then
from the diff of the result extracting the hunks corresponding to
fixes of namespace comments. The changes being applied and all the
results have been manually reviewed. The source code successfully
builds on macOS.
Further details on the steps below, in case they're of interest to
someone else in the future.
1. Checkout a fresh and up to date version of src/
git pull && git checkout -- src && git status src
2. Ensure there's a suitable .clang-format in place, i.e. with options
to fix the comment at the end of namespaces, including:
FixNamespaceComments: true
SpacesBeforeTrailingComments: 1
and that clang-format is >= 5.0.0, by doing e.g.:
clang-format -dump-config | grep Comments:
clang-format --version
3. Apply clang-format to the source:
clang-format -i $(find src -name "*.cpp" -or -name "*.h")
4. Create and filter out hunks related to fixing the namespace
git diff -U0 src > tmp.patch
grepdiff '^} // namespace' --output-matching=hunk tmp.patch > fix_namespace.patch
5. Filter out hunks corresponding to simple fixes into to a separate patch:
pcregrep -M -e '^diff[^\n]+\nindex[^\n]+\n--- [^\n]+\n\+\+\+ [^\n]+\n' \
-e '^@@ -[0-9]+ \+[0-9]+ @@[^\n]*\n-\}[^\n]*\n\+\}[^\n]*\n' \
fix_namespace.patch > fix_namespace_simple.patch
6. Manually review the simple patch and then apply it, after first
restoring the source.
git checkout -- src
patch -p1 < fix_namespace_simple.path
7. Manually review the (simple) changes and then stage the changes
git diff src
git add src
8. Again apply clang-format and filter out hunks related to any
remaining fixes to the namespace, this time filter with more
context. There will be fewer hunks as all the simple cases have
already been handled:
clang-format -i $(find src -name "*.cpp" -or -name "*.h")
git diff src > tmp.patch
grepdiff '^} // namespace' --output-matching=hunk tmp.patch > fix_namespace2.patch
9. Manually review/edit the resulting patch file to remove hunks for files
which need to be dealt with manually, noting the file names and
line numbers. Then restore files to as before applying clang-format
and apply the patch:
git checkout src
patch -p1 < fix_namespace2.patch
10. Manually fix the files noted in the previous step. Stage files,
review changes and commit.
Fix the whitespace in e.g. 'QString&' to 'QString &' as this
incorrect, but primarily to simplify a comparison related to
later possibly introducing the use of .clang-format.
This is a consequence of e91572a0, although it is not clear why. The
contextMenuEvent code of the workarea should not delegate context
menu when it cannot honor it.
Also fix a small memory leak.
Fixes bug #10616.
(required because filesystems return listings in undeterministic order)
to generate Resources.qrc and thereby Resources.cpp and the lyx binary
in a reproducible way
Setting LC_ALL=C because sort order might vary with locales.
See https://reproducible-builds.org/ for why this matters.
Fixes#10711.
In some (not yet understood) situations, the paragraph metrics cache
is empty in generateSyntheticMouseEvent(). We just avoid a crash in
this case, but there is probably an underlying problem that deserves
being fixed.
Fixes bug #10324.
This removes the use of rectText in RenderButton. The fact that this
gave different spacing than buttonText was a problem.
Now buttonText requires to specify
* the offset, so that INSET_TO_TEXT_OFFSET is not used anymore in
src/frontends/, which will be useful later.
* the background and frame color, in replacement for the hover state.
Remove the methods button() and buttonFrame() from GuiPainter.
Remove some unused header files.
Fixes bug #10704.
In the document settings allow to immediately switch from one
package to the other for parameters validation without the need
of first applying the changes.
Several comments in the code point to the fact that hidden buffers are assumed
to be clean.
The other solution was to adapt the closing & saving code to take into account
hidden dirty buffers. Experience shows that it is more useful to unhide the
buffers at the moment of the external modification, in the context of a git
workflow where one has to reload the modified children buffers one-by-one.
Fixes crash at #10603
Starting at 61b2bd5e, boost::bind was progressively replaced with
std::bind. They are not interchangeable though. boost::bind implements
the tracking of boost::signals{,2}::trackable objects. Now that
std::bind has completely replaced boost::bind, tracking never occurred.
This commit replaces boost::signals2::trackable with the new preferred
boost::signals2 methods: scoped_connections or slot::track_foreign. The
support::Trackable class introduced is less safe but easier for transitioning
old code.
Fixes the crash at #8261.
We stored the combo position index, but this changes on engine switch.
This also fixes a crash due to out-of-bound index at engine switch.
Fixes: #10692
When choosing a code language that has dialects in the languages
combo box, the dialects combo gets activated also when minted is
in use. However, minted does not support the concept of dialects
and the combo should not be enabled. This is harmless because the
dialects are simply ignored and the dialects status is restored
after apply, but it may fool the user in thinking that a dialect
can be actually selected. So, always disable it with minted.
Update the listings inset to optionally use the minted package
(instead of the listings one) for typesetting code listings.
Only one of the two packages can be used in a document, but it
is possible to switch packages without issues if the used options
are the same. If a switch is made and the options differ, one needs
to manually adjust them if they were entered in the advanced options
tab, or apply again the gui settings.
Note that minted requires the -shell-escape option for the latex
backend and the installation of additional software (python pygments).
This commit replaces the string math_number_before by a proper math_number enum.
Note that the _before naming was misleading. It was chosen at a time
when we were not sure whether leqno was always left or could be right
in RtL documents.
Note that the token in LyX document is still \math_number_before and
this should be changed.
Fixup for 19cc4a1f.
as discussed our support for the formula numbering side should be complete. There are document classes that uses left numbering as default and with the class option "reqno" this can be changed to right numbering. reqno requires the loading of amsamth.
- Adds a currentZoom variable which holds the current zoom level.
- The zoom stored in preferences is used as default zoom level (default binding:
M+0).
- The currentZoom is saved and restored via QSettings.
- Adds LFUN buffer-zoom for (re)setting zoom.
Use Length instead of HSpace for math_indentation and rename it to mathindent.
Get rid of the string version.
Rename (g|s)etMathIndentation() to (g|s)etMathIndent().
Remove the HSpace class altogether.
Some cleanups to parindent support to look like mathindent.
When applying or saving Document Settings, LyX no longer opens or
closes branch insets. The intent of the previous code was to open
branch insets of a branch that is activated, and close branch insets
of a branch that is deactivated.
After some discussion [1], it was decided that the behavior intended
by the previous code was inconsistent with activating/deactivating a
branch in the context-menu of a branch inset, and the previous code
assumed a workflow of the user, rather than letting the user
separate opening/closing branch insets from activating/deactivating
them.
This commit modifies fd6cd728.
[1] https://www.mail-archive.com/search?l=mid&q=20161030220813.3zlp3zgqgomhx35y%40steph
When trying to do implement a LaTeX feature on screen, it is always
good to see how LaTeX does it, just in case it is easy to implement on
our side.
Then we have a correct output at all DPI sizes.
With RtL text, the method can be non-monotonic wrt x value (which is a
Qt bug). To work around this, we check whether positions adjacent to
those returned by xToCursor look better. Depending on whether the new
x position is too small or too large, we look backward or forward for
a better solution.
The performance is probably not great, but this is only needed for
user interactions, so the performance penalty should not be a problem.
Fixes#10569.
Rephrase positively the check box for the output of en- and em-dashes
and disable it when using non-TeX fonts. The state of the check box
is remembered, so that toggling the non-TeX fonts check box does not
cause information loss.
This commit fixes the regression introduced in 2.2 about the
output of en- and em-dashes. In 2.2 en- and em-dashes are output as
the \textendash and \textemdash macros when using TeX fonts, causing
changed output in old documents and also bugs (for example, #10490).
Now documents produced with older versions work again as intended,
while documents produced with 2.2 can be made to produce the exact
same output by simply checking "Don't use ligatures for en-and
em-dashes" in Document->Settings->Fonts.
When exporting documents using TeX fonts to earlier versions, in order
to avoid changed output, a zero-width space character is inserted after
each en/em-dash if dash ligatures are allowed. These characters are
removed when reloading documents with 2.3, so that they don't accumulate.
Introduce a distinction between being read-only and having the read-only flag. A
buffer is read-only if either it has been externally modified or if it has the
read-only flag.
Coverity does not find it obvious that p is never negative. Normally
it is the case (because the items have been filtered), but it is
better to play safe.
Instead of using a coverity annotation (that does not work) it is
better to really iinitialize the members of the object, just in case
somebody decides to actually use the DisplayPath() constructor.
It extended QToolBox with size calculation to fix UI issues with the previous
design of GuiCitation. Since it always needed some kind of hack and since
QToolBoxes do not appear so popular, it probably won't be used anymore.
Useful to cache copies of objects, including shared_ptrs. No risks of dangling
pointer, and avoid naked pointers in the source.
Fix memory leak when compiling with Qt5.
The current version was wrong for non-English dialogs, and even for
the English one, due to the translator commands that were not removed
for calculation (as in "Formats[[output]]").
Candidate for stable.
This adds support for the chapterbib package, but also adds ways to
produce this sort of multibib with biblatex and bibtopic (which are
both incompatible with chapterbib).
File format change.
File format change.
This allows for the relevant InsetCommand-based dialogs (such as
citation text before/after, Bibitem label, hyperlink name etc.)
to provide both the input of verbatim code or text that is transformed
to proper LaTeX code.
Some dialogs (Nomencl, Href) already had some methods (although they
could not be toggled), which are now centralized and streamlined.
The initial work of this patch has been done by Georg Baum (see
http://www.lyx.org/trac/attachment/ticket/2751/x.diff)
Fixes: #2751, #8227.
Starting with Qt 5.6, setting the environment variable QT_SCALE_FACTOR
makes everything accordingly bigger. So, if QT_SCALE_FACTOR=1.2, all
text and GUI elements are rendered 20% bigger. However, if an application
does not account for this, everything will also look "blocky".
With this commit, all text and images will be scaled remaining sharp.
This works whether a HiDpi screen is used or not, but is mostly useful
with a HiDpi screen, as all GUI elements are more spaced apart and one
can use the mouse for selecting things without requiring a high precision.
These are biblatex-specific multicite commands that allow for multiple
pre- and postnotes, as in:
\cites(pre)(post)[pre1][post1]{key1}[pre2][post2]{key2}...
with an optional general pre- and postnote, which applies to the whole
list (like [][] in normal cite commands) and an optional pre- and
postnotes for each item, so that pagination can actually be specified in
multi-cite references, as in:
(cf. Miller 2015, 2; furthermore Smith 2013, 23-23; Jenkins 2012, 103,
also refer to chapter 6 in this book)
See the biblatex manual, sec. 3.8.3., for details.
File format change.
It seems that QTextLayout does not handle properly a single character
with 0 width. This breaks drawing of things like \not.
Actually the problem had been worked around already in lib/symbol. The
work around can therefore by removed now.
[additionally, remove extra spacing from \mapsto, \Mapsto]
Fixes missing outliner names in various situations. Now if the warning "Missing
outliner name" appears in the console, this correctly hints at an actual issue
with the layout.
Biblatex can be used with Japanese, but then, biber (not pbibtex) should
be used as processor.
I this context, bring the jbibtex UI in line with bibtex, allowing for
a selection of alternatives.
This is now set as default. It selects biber for Biblatex (with
fall-back to first bibtex8, then bibtex, if the former is not
installed), and bibtex for BibTeX-based engines.
With this, users do not normally need to care for the processor when
they switch cite engines.
inset.
If the reference is "sec:mysec", then this will output just "mysec".
This is what is needed, e.g., to use refstyle's range commands, e.g.,
\secrangeref{mysec1}{mysec2}
You *cannot* use:
\secrangeref{sec:mysec1}{sec:mysec2}
even if those are the actual labels.
Eventually, I'd like to add native support for this, but I'm a bit
frightened of trying to make the reference dialog support multiple
selections.
This entails a change of getAbbrAuthor to getAuthorList (the default is
still abbreviated with respect to MaxCiteItems, but the list can be, at
explicit request, shortened or full notwithstanding MaxCiteItems.
Next to the cmd name, introduce optional latex names (that might differ
from the cmd name) and aliases (that are "obsoleted by" the cmd).
This enhances portability between the engines.
https://www.mail-archive.com/lyx-devel@lists.lyx.org/msg198191.html
The root of the issue is in Buffer::reload() called during "Save As". After
loadLyXFile() there, all the insets have been deleted, and therefore the Inset
pointer GuiView::documentBufferView()->cursor().inset() is dangling. Immediately
after loadLyXFile(), reload() calls updateBuffer() which causes a segfault.
While debugging I got other segfaults caused by the same dangling Inset pointer
in Cursor, notably: 1) a trace identical to the second one from
<http://www.lyx.org/trac/ticket/10520>, and 2) a similar segfault in the
critical path after emergency saving (call to inMathed()).
Having to "refresh" by hand the inset pointer cache in CursorSlice is very
unsatisfactory, but there does not appears to be a consistent strategy for
managing these Inset pointers in CursorSlice.
From: "Joel A. Kulesza" <jkulesza@gmail.com>
Date: Mon, 24 Oct 2016 17:37:58 -0600
Subject: [PATCH] Add "Swap & Reverse" to math delimiter dialog
When "Keep matched" is unchecked, a button becomes enabled to "Swap &
Reverse" the left and right delimiters. This is expected to be of use
with line-wrapped equations featuring one or more set of delimiters that
break across the lines. When "Keep matched" is checked, the button is
visible but disabled.
The most common use case is expected to be the user entering a pair of
unmatched delimiters on the first line of an equation (e.g., "(" and
"(None)"), entering the inner text, going to the next line, and
inserting the opposite set of delimiters (e.g., "(None)" and ")").
This button will negate the need to find the correct corresponding
combination. However, it relies on the dialog's memory of the previous
unmatched set.
This change addresses Ticket #10457
-----------
Modifications by spitz to the original patch:
* Only enable the button if an unmatched pair is selected
* Consider l7n when locating the string "(None)"
* Add an accelerator and a tooltip to the dialog
* Simplify the code a bit
* b `british' (``inner quotation'')
* w >>swedishg>> ('inner quotation') ["g" = Guillemets]
* f <<french>> (``inner quotation'')
* i <<frenchin>> (<<inner quotation>>) ["in" = Imprimerie Nationale]
* r <<russian>> (,,inner quotation``)
Rename "french" to "swiss"
Also rename "single/double" to "secondary/primary" ("inner/outer" in
the UI) and "left/right" to "opening/closing". Note that the inset
identifier string is left as is ("s/d" and "l/r")
The current char-based implementation gets increasingly unreadable,
especially if styles are added that do not follow the strict
single-double paradigm.
The QTextLayout handling is terribly slow on Qt 4.8.7, but some
caching has been added in Qt5 that makes it much faster. For some
reason, it is not that slow with Qt 4.8.1.
Caches are introduced for the three following methods
* width(doctring), controlled by CACHE_METRICS_WIDTH. This cache already
existed, but the code has been cleaned up
* getTextLayout, controlled by CACHE_METRICS_QTEXTLAYOUT (disabled by
default on Qt5, which does its own caching). This is used for pos2x
and x2pos and now for drawing of text too. The previous code used a
trivial caching scheme of the last used QTextLayout, but now they
are properly kept in a QCache. Moreover, the cacheEnabled() property
is enabled for these QTextLayout object (not sure what this does).
* breakAt, controlled by CACHE_METRICS_BREAKAT. This is the only user
of QTextLayout which did not have some kind of caching already.
For some weird reasons related to Argument-dependent look-up, the
qHash(docstring) function has to be defined in std namespace, since
lyx::docstring is actually std::basic_string<wchar_t>.
[NOTE: this version has profiling hooks, enabled by commenting out the line
#define DISABLE_PMPROF
that should eventually be removed.]
It may happen (for example with on the fly spell checking) that
GuiFontMetrics::pos2x is called with a negative pos value. Add a
special case for this situation.
Fixes bug #10506
