(multi-encoding -> utf8); specifically, the language was being
incorrectly identified in certain insets, which of course led to
encoding problems.
This fixes part of bug 3613 (http://bugzilla.lyx.org/show_bug.cgi?id=3613).
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@19151 a592a061-630c-0410-9148-cb99ea01b6c8
* src/support/docstring.{cpp,h}:
- rename normalize_kc to normalize_c and use normalization form C (instead of KC)
* src/callback.cpp:
* src/Trans.cpp:
* src/frontends/qt4/GuiClipboard.cpp:
* src/frontends/qt4/GuiSelection.cpp:
* lib/lyx2lyx/lyx_1_5.py:
- use normalization forms C and D instead of KC and KD.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@18991 a592a061-630c-0410-9148-cb99ea01b6c8
- Split the language Arabic into "arabic_arabi" that uses the arabi-package and "arabic-arabtex" that uses the arabTeX-package to typeset Arabic. This is needed because both packages have some advantages over the other people need.
(This change is a consequence of a long and fruitful discussion with Mostafa, Dov, and me.)
Patch by Dov and me.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@18887 a592a061-630c-0410-9148-cb99ea01b6c8
language to be in the paragraph's language. This is necessary due to format
change 259, but the language was forgotten in lyx2lyx back then. It's important
for Bidi documents.
(fixes bug http://bugzilla.lyx.org/show_bug.cgi?id=3789)
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@18766 a592a061-630c-0410-9148-cb99ea01b6c8
Introduces new encodings for the CJK-languages.
The CJK-languages can now be selected from LyX's menu.
For remaining small problems, see the thread "Help needed for bug 3043" on the devel-list.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@18216 a592a061-630c-0410-9148-cb99ea01b6c8
- add new encoding utf8-plain for the sake of XeTeX users (bug 3526)
* src/BufferParams.cpp:
- implement new encoding (skip inputenc)
- fix logic error with thailatex
* src/Buffer.cpp:
* lib/lyx2lyx/LyX.py:
* lib/lyx2lyx/lyx_1_5.pyx:
* development/FORMAT:
- format increment to 267
- reset encoding to utf8 on reversion.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@18198 a592a061-630c-0410-9148-cb99ea01b6c8
* lib/lyx2lyx/lyx_1_5.py
(convert_multiencoding): Don't get confused by too many \end_layout
tokens.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@17673 a592a061-630c-0410-9148-cb99ea01b6c8
(convert_ert_paragraphs): Fix off-by-one error that causes an out of
range error in find_token
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@17271 a592a061-630c-0410-9148-cb99ea01b6c8
(normalize_font_whitespace): Fix handling of nested font changes
and also handle blanks before a font change
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@17158 a592a061-630c-0410-9148-cb99ea01b6c8
The function convert_accent will be used when we get rid of InsetLatexAccent.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@17017 a592a061-630c-0410-9148-cb99ea01b6c8
Uwe, please add an exact decsription of the lyxline changes to
development/FORMAT: How did the old version work, and what are the changes
of the new one.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@16991 a592a061-630c-0410-9148-cb99ea01b6c8
* buffer.C: increase LyX format to 257.
* lyxtextclass.C: increase FORMAT format to 3.
* buffer_funcs.C:
- setCaptionLabels(): new recursive function
- setCaptions(): new function
- updateLabels(): call setCaptions() for each paragraph.
* InsetCaption:
- add a virtual destructor
- overload InsetText' getStatus() and wide().
- setLabel(): only set the new private member label_.
- metrics(): don't set label here and correct for title metrics.
- draw(): don't set label here
- latex(): fix optional argument.
- plaintext(): implement!
* InsetText:
- add a virtual destructor
- add virtual to getStatus() and wide().
* output_latex.[Ch]: move latexOptArgInsets() out of anon namespace.
* text3.C: enable LFUN_CAPTION_INSERT
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@16948 a592a061-630c-0410-9148-cb99ea01b6c8
\inputencoding default
* src/paragraph_pimpl.C
(isEncoding): Explain why bparams.inputenc == "default" is ignored
* src/bufferparams.C
(BufferParams::encoding): Determine the encoding from the language
for inputenc == "default"
* src/buffer.h
(writeLaTeXSource): Mention inputenc == "default" in documentation
* src/bufferparams.h
(inputenc): Update documentation of "default"
* src/output_latex.C
(switchEncoding): Switch the encoding also for inputenc == "default",
but don't output \inputencoding commands in that case
* lib/lyx2lyx/LyX.py
(get_encoding): Determine the encoding from the language for
inputencoding == "default"
* lib/lyx2lyx/lyx_1_5.py
(convert_multiencoding): ditto
* development/FORMAT: Update documentation of \inputencoding default
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@16667 a592a061-630c-0410-9148-cb99ea01b6c8
encodings in the preferences dialog
* src/LaTeXFeatures.C: special treatment for tis620-0 encoding
* src/bufferparams.C: ditto
* src/output_latex.C: ditto
* src/encoding.[Ch]: Add the possibility to iterate over all encodings
* src/paragraph_pimpl.C: Add latin10 and cp858 to Euro treatment
* src/buffer.C: Update format number
* src/frontends/qt4/QDocumentDialog.C: Don't hardcode available
encodings
* lib/lyx2lyx/LyX.py,
lib/lyx2lyx/lyx_1_5.py: implement conversion from 256 to 255
* lib/encodings: Add some encodings, fix all "unknown" entries
* development/FORMAT: Document file format change
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@16418 a592a061-630c-0410-9148-cb99ea01b6c8
codepoint > 255.
I decided that this is no file format change: We already had the change to
format 249 that allowed unicode in .lyx files. The output to .tex of
non-ascii characters is now different than before (even for those that were
supported previously, e.g. german umlauts in latin1), but this is only
relevant if people referenced a label in ERT. Since we cannot detect this
anyway we don't need a file format change.
* src/support/lstrings.C
(escape): Extend the escaping algorithm from 8 bit to 24 bit.
* src/support/lstrings.h
(escape): Update comment
* lib/lyx2lyx/lyx_1_4.py
(lyx_support_escape): Update comment
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15883 a592a061-630c-0410-9148-cb99ea01b6c8
Now we can parse all commands that could be parsed in the old
InsetCommandParams
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15551 a592a061-630c-0410-9148-cb99ea01b6c8
* src/insets/insetcommandparams.[Ch]:
(operator[]): New, access a parameter
(clear): New, clear all parameters
(info_): New, stire info about this command
(cmdname): Rename to name_
(contents, options, sec_options): Replace with params_. Parameters
are now stored as docstring.
(findInfo): New factor for command info for all commands
(read, write): Use new syntax
(parameter set and get methods): reimplemenmt for new parameter storage
* src/insets/insetcommand.h
(getParam): New, get a parameter
(setParam): New, set a parameter
(parameter set and get methods): Adjust to InsetCommandParams changes
* src/insets/insetbibitem.[Ch]
(write): Remove, not needed anymore
(directWrite): ditto
* src/insets/insetbibitem.C
(InsetBibitem::read): Use InsetCommand::read
* src/insets/insetref.C
(InsetRef::latex): Use new InsetCommandParams interface
* src/mathed/InsetMathHull.C
(InsetMathHull::doDispatch): ditto
* src/text3.C
(LyXText::dispatch): ditto
* src/factory.C
(createInset): Create InsetCommandParams with command name
(readInset): ditto
(readInset): Remove error message for bibitem, since bibitem is
now a normal command inset
* src/buffer.C: Bump file format number
* src/frontends/controllers/ControlCommand.[Ch]
(ControlCommand): take an additional command name parameter
* src/text.C
(readParToken): Remove code for \bibitem
* lib/lyx2lyx/LyX.py: Bump latest file format number
* lib/lyx2lyx/lyx_1_5.py
(convert_bibitem, convert_commandparams): new, convert to new format
(revert_commandparams): new, convert to old format
* development/FORMAT: document new format
* many other files: Adjust to the changes above
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15357 a592a061-630c-0410-9148-cb99ea01b6c8
* src/buffer:
file format incrementation to 251
* src/insets/insetcharstyle.[Ch]:
- make show_label a param and save its state
- let all-insets-toggle togle the label in charstyles
* development/FORMAT:
document file format change
* lib/lyx2lyx/LyX.py:
add new file format
* lib/lyx2lyx/lyx_1_5.py:
remove char style label param on reversion to 250.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15345 a592a061-630c-0410-9148-cb99ea01b6c8
(dist_pkgdata_PYTHON): and put it here
(dist_scripts_DATA): rename to dist_scripts_PYTHON; this invokes
automake's built-in python support.
(install-data-hook): adapt to above change.
* lib/lyx2lyx/Makefile.am (dist_lyx2lyx_DATA): rename to dist_lyx2lyx_PYTHON;
this invokes automake's built-in python support.
(install-data-hook): new target: sets executable bit on lyx2lyx.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@14592 a592a061-630c-0410-9148-cb99ea01b6c8
Support all lyx files (support goes to lyx-0.6 the first public available lyx version).
Fine tune the guessing of the lyx version used to produce the document (only useful for 2.10 and 2.15 documents).
Support to convertion to utf-8 encoding was added but it is not (yet) active.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@14558 a592a061-630c-0410-9148-cb99ea01b6c8
as a python dictionary, ready to be used by other python modules.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@14557 a592a061-630c-0410-9148-cb99ea01b6c8
The calls are now made to string methods, the advantage being that they work with
unicode strings.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@14537 a592a061-630c-0410-9148-cb99ea01b6c8
Add a documentation string to each module.
Add a documentation string to every function in the modules.
file is a python reserved word => s/file/document/g as variable
add a new property to modules, supported_versions that holds
the versions supported by that module
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@14534 a592a061-630c-0410-9148-cb99ea01b6c8
lyx_0_10.py
LyX.py: add support for UserGuide convertion from lyx-0.8 (and 0.7).
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@14532 a592a061-630c-0410-9148-cb99ea01b6c8
* lyx_1_1_5.py
* lyx_1_2.py
* lyx_1_3.py
* lyx_1_4.py
* lyx_1_5.py
* parser_tools.py: remove functions that are not generic, i.e.
assume a specific pattern for the file format, and move them to the
places where they are used.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@14503 a592a061-630c-0410-9148-cb99ea01b6c8
