In some cases, the insets may change height or width without changing
the other apsects of the row.
Fixes bug #6991 and #10182.
(cherry picked from commit 508518ad95)
The computation of the width of the button was wrong. If <--> stands
for TEXT_TO_INSET_OFFSET/2 spacing, and if `[]' marks the button's
limits, then the intent is
<-->[<-->button text<-->]<-->
Therefore the physical grey rectangle width is
width - Inset::TEXT_TO_INSET_OFFSET
With this change, the spacing on the right of the button is not larger
than the left one.
Fixes bug #10147.
(cherry picked from commit 516d5d29dc)
There is already a spacing of 2 pixels on each side of a button (e.g.
collapsed inset). There is no need to add one extra pixel for command
insets.
Fixes part of bug #10149.
(cherry picked from commit 68149e380d)
As such, it shall be protected in moving arguments, such as sections.
Fixes bug #10092.
(cherry picked from commit 86ee2699c30b63e5b4de3ad725519756d17aec2c)
Those two functions used two different hackish and buggy
implementation to know when the function is disabled. Replace that by
asking the containing inset whether it accepts inserting display math
inset.
Fixes bug #10033.
(cherry picked from commit de5630a1562054cb969b106e35f84bfe1e99002a)
The Reproducible Builds effort (https://wiki.debian.org/ReproducibleBuilds) in Debian (at least) means that 'ar' is built in deterministic mode as default: all timestamps are set to 0.
This is not compatible with the use of the 'u' flag, and therefore ARFLAGS has to be changed from 'cru' to 'cr'.
This gets rid of the harmless but annoying warning
ar: `u' modifier ignored since `D' is the default (see `U')
(cherry picked from commit 987fc1d15d017c192a566fc922e3967d9d280668)
When in a tabular cell, "this" is just a lone InsetText, while cur.inset() is the whole tabular. This makes a big difference, especially when one wants to count cells.
Fixes bug #9954.
(cherry picked from commit 4caf167dbd24722421ae8d94a2c103bf41a7667d)
The old name conflicted with the newly introduced Inset::isTable.
Now the meaning is as follows.
* Inset::isTable() is true when the inset is composed of lines and columns
* InsetMathHull::allowsTabularFeatures is true when the current type of hull allows for tabular-like functions.
(cherry picked from commit db39dc7ccd4c2dd14ef20547e6e3c056ba030d83)
inset-select-all has 3 levels
1. select current cell
2. select all cells
3. select inset from outside.
The second level makes sense for tables (text and math), but not for things like a math fraction.
Introduce a new method Inset::isTable() that allows to detect this case properly and skip level 2.
(cherry picked from commit 5de28b9ac6736c791146a1a3ebe7f4826c22a9b7)
"Output changes" alters the preamble even in the absence of tracked
changes. Therefore, not being able to notice when it is activated can possibly
yield hard-to-debug compilation failures.
(#8738)
For efficiency, we add a new flag to the buffer indicating when changes are
present. This flag is updated at each buffer update, and also when explicitly
requested via a dispatch result flag.
The timer logic introduced to solve bug #7138 was not entirely reliable; in
particular it resulted in spurious updates (noticeable by the treeview
collapsing just after one opens a branch, in particular).
This commit cleans up the timer logic. I followed the original design decision
of having an immediate update followed by a delayed update. Now the updates are
appropriately compressed and done after a delay of 2s (as can be noticed with
the treeview still collapsing, unfortunately, but after a more predictable
delay...).
4d1ad336fixed#9754 but caused perf issues by cancelling the gains of having a
timer (introduced after #7138). This introduces in GuiToc::enableView() a
lightweight check of whether the widget should be updated. The logic is inspired
from GuiViewSource::enableView().
If we do not do that, it is not possible to position the cursor after
a long inset with the mouse.
To do this, it is necessary to add the pit information to the Row
object. This is a good idea in any case, and will allow to simplify
some code later on.
Fixes bug #10094.
(cherry picked from commit 8851645799ef67015e49fd75b9dfeed65d685e85)
When document settings are modified, a command
inset-forall Branch inset-toggle asign
is run to open as needed all branches. At the end of the said loop,
the cursor is reset to where it was. However, the cur_after undo
element member is not set because it already had a value.
To make this work as expected, it is necessary in LFUN_INSET_FORALL to
reset the cursor before ending the undo group and to insert a dummy
recordUndo call.
Fixes bug #10097.
(cherry picked from commit 0036762f30def16ab8b2216f721f9e552893bc85)
Ask the user for removing bindings when using the "restore" button (#9174).
Fix the already-bound-key detection logic.
Don't forget to trigger the search when initializing the search LineEdit with
its former value.
While a one paragraph large collapsable inset (containing for example a tabular) could be very wide and trigger horizontal scrolling, the code that makes collapsable insets wide when they contain several paragraphs would actually make them narrower in this case.
Typical example is a wide tabular and a caption in a table float, where horizontal scrolling would not trigger.
(cherry picked from commit 8c7ace4b on 2.3.0-staging)
This is done by implementing the clickable method. It is not possible yet to have the usual left and down arrows, because Qt does not implement them as far as I can see.
Factor the code that triggers row/column selection and fix the logic. Now it is possible to select also at the right of the tabular inset.
When several bufferviews exist for the same inset, the data that depends on the view width have to be BufferView-dependent. While this is the case for several mutable members of InsetCollapsable, some were missing.
This commit makes button_dim_ (renamed from button_dim) and openinlined_ bv-dependent.
Get rid of the hitButton function.
Remove the bv-independent geometry() method and implement editable() explicitely instead.
Fixes bug #9756.
"echo -e" is definitely not portable. Use a plain loop instead.
Also use the automake silent rule mechanism to make the generation of monolithic source files visible.
Remove in particular all comparisons < and >= involving HullType.
Add a guard to make sure that mutate() only operates on types it has been
designed for. Then I figured I could use this new knowledge to give feedback
when math-mutate is not implemented via getStatus(). (To test this, insert a
regexp in Advanced Search & Replace and try to change it into a standard
equation via the contextual menu.)
AMS align environment should have some spacing between odd and even columns.
Add a new virtual method displayColSpace() to InsetMathGrid, InsetMathHull and
InsetMathSplit.
A longstanding problem... (related: #1861)
The columns in AMS math environments have a fixed alignment (colAlign() in
InsetMathGrid.cpp). We set this alignment for display (Georg's
displayColAlign()) in InsetMathHull and InsetMathSplit. This is done according
to tests and documentation for the various environments.
There is also some mechanical code factoring via colAlign().
Finally, I disable setting the horizontal alignment in InsetMathSplit, which has
no impact on the LaTeX output, and has no longer any impact on the screen. (As
for vertical alignment I discovered that it was in fact customisable for
\aligned & friends! I hope that the more faithful interface will let other
users discover that too.)
The offending code appears to have been introduced a long time ago. My
understanding is that it is no longer relevant. Notably, it only appears on copy
and not on cut, which tells us that: 1) it should be safe to remove it, 2) we
should remove it for consistency.
