Both bugs above were due to a missing screen update. This patch
updates the current view after dispatching a lyxserver command
and thus solves both.
The patch is quite strightforward and the only difficulty was due
to the fact that the lyxserver needs the result of the dispatched
command. Now, GuiApplication::dispatch(FuncRequest const &) does
right this, but does not return the result, while
GuiApplication::dispatch(FuncRequest const &, DispatchResult &)
is called by the former but does not return the result. So, I
split the first one, isolating the code performing the update,
such that the second one can also update the current view when
the caller is the lyx server. When the action is initiated by
anything different from the lyx server, the behavior is unchanged.
It seems that parameterless macros are not wrapped into a MathAtom.
Rather than touching the macro code (which is tantamount to opening
a can of worms, IMHO), I prefer this solution.
If a converter specifies the needaux flag, latex (or xelatex) is
always run to produce the needed auxiliary files. This is wrong
because there are documents that can only be compiled with a specific
backend and thus the conversion may fail. On the other hand, even if
the document specifies the backend to be used, LyX ignores this info.
This commit rectifies this behavior by letting LyX run the same flavor
of the latex backend that shall be used for previewing the document
also for producing the auxiliary files.
The listings inset and include inset of type listings use two english terms
that are not localized yet: "Listing" for the caption and "Listings" for the
list of listings (not supported natively by LyX yet). The existing layout
translation mechanism has been extended to translate these terms as well:
1) Support [[stuff]] context in lib/layouttranslations
2) Support BabelPreamble and LangPreamble in InsetLayout
3) Use a InsetLayout for InsetInclude of type listings
4) Define BabelPreamble and LangPreamble in the layouts for InsetInclude
and InsetListings
LyX fails to read the bounding box from an EPS file if it has
negative values. Adjusting the regex will overcome this problem.
Negative values do not pose big problems later on, but the GUI
doesn't handle it correctly yet (see bug #5718).
It is broken since the latest file format update (neither did Uwe run a test
after updating the file format, nor did I after undoing my accidental change).
The reason it was broken: the bool version of write_attribute() is chosen
for "0" instead of the string version, so each table used rotate="true".
Math commands need it as well as text commands. At the same time, this
further unifies the checking for termination and fixes cases of wrong
output (e.g. for 0x2005).
If \hline is entered, do not create an unknown inset, but increase the number
of hlines of the current row if that is allowed. The same idea is applied to
copy-paste (not part of the bug report).
This is also a test for committing via git.
The crash was due to the otherwise innocent looking 07924ac300. The cast
Vincent replaced was already wrong---it seems to have been a thinko in
7bbd67eb2679---but it worked kind of by accident before. Now it crashes.
Setting up .gitignore or .git/info/excludes is something that should
be done. Not doing it makes it a lot harder to see actual new files
that should be added.
Signed-off-by: Lars Gullik Bjønnes <larsbj@gullik.org>
Multirows were introduced in 8bb69f24 (Uwe Stoehr, 11 Feb 2010). In the
computation of the nearest cell, it was forgotten to account for the
vertical offset. tabular.cellHeight is the full height of the cell, while
the point that comes from the coordCache is offsetted by VOffset.
Therefore, we have to subtract the VOffset from o.y_.
We only copied the error list to the cloned buffer when makeLatexfile
failed. This means that a second try will never clear the error list and
the user will be presented the same list again.
Therefore, we unconditionally copy the error list such that we also clear
the list on success.
These warnings have been (accidentally) commented out in
42aeab2a (uwestoehr; support for table cell rotations;
16-03-2012). In the next commit the warning will be replaced
by a form which is also understood by MSVC.
* do not terminate macros by {} if not necessary (prevent kerning violation)
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@40891 a592a061-630c-0410-9148-cb99ea01b6c8
Currently only basic functionality (our math-tipa functionality plus multipar input). Further enhancements (such as proper unicode input and a specific toolbar) are planned. DocBook and XHTML output also need to be audited.
The lyx2lyx reversion routine surely can be improved (help appreciated), and I don't know tex2lyx enough to handle this file format change.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@40867 a592a061-630c-0410-9148-cb99ea01b6c8
- Parser.cpp: - new function to parse verbatim environments
- test/test-structure.tex: updated example
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@40850 a592a061-630c-0410-9148-cb99ea01b6c8
- Enter in the textfield adds the branch,
- Make sure the dialog is not closed when pressing enter,
- Pressing Ctrl+Enter or the Enter on the numpad closes the dialog.
Patch based on a patch from Scott Kostyshak.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@40839 a592a061-630c-0410-9148-cb99ea01b6c8
Add a new layout syntax CiteEngine to define the citation commands
available for a given citation engine.
Also extend the CiteFormat syntax to allow more customization. This
mechanism, previously used to produce bibliography entries in the
citation GUI based on the BibTeX entrytype, is now also used to
produce the textual labels for citation insets in the buffer view.
Thus citation styles are almost completely customizable by modules.
Modules for the basic, jurabib and natbib engines are implemented.
Layout format incremented to 37.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@40820 a592a061-630c-0410-9148-cb99ea01b6c8
overriding a pure virtual method (part of bug #8032).
I wonder why it was working on Windows and why it works for QString.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@40783 a592a061-630c-0410-9148-cb99ea01b6c8
After the timeout elapses, the user is notified that a command is taking
a long time to complete and is given the choice to stop it. If the user
decides to let the command run, the timeout is increased, otherwise the
command is killed. One is prompted a first time after 3 mins, a second
time after 9 mins, a third time after 27 mins, and so on, i.e., the n-th
prompt occurs after 3^n minutes.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@40775 a592a061-630c-0410-9148-cb99ea01b6c8
* now hasSettings only means... that the inset has a settings dialog
* and clickable means that something should happen with left-clicking on the inset
Some inset behaviours are changed:
* (V)Space insets are not clickable anymore (the settings dialog is still accessible via context menu and Edit menu)
* TOC inset is now shown as active
* FloatList inset is shown as active and clicking on it opens the relevant part of the TOC dialog
This could be a candidate for branch (2.0.4)
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@40755 a592a061-630c-0410-9148-cb99ea01b6c8
http://www.lyx.org/trac/ticket/6367
* Undo.cpp:
- rename cur member of UndoElement to cur_before
- add new member cur_after, which is set by Undo::endUndoGroup
- create a new Undo::endUndoGroup variant that takes a Cursor as parameter. We cannot get rid of the old one because it is used for LFUN_COMMAND_SEQUENCE.
* Cursor.cpp:
- use endUndoGroup(Dociterator const &) for dispatch
- update Cursor::endUndoGroup to pass cursor.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@40713 a592a061-630c-0410-9148-cb99ea01b6c8
changing limits status (fixes bug #8007)
* InsetMathScript::getStatus (new) : handle properly status for LFUN_MATH_LIMITS here, along with checkmark support for the menu)
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@40700 a592a061-630c-0410-9148-cb99ea01b6c8
The small ascii art in InsetMathCancel::draw has line continuation characters at
eol, this make consecutive lines be andled as one. The use of a block comment
instead of single line comments makes this less of a "problem." Also it removes
a warning with gcc 4.7.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@40699 a592a061-630c-0410-9148-cb99ea01b6c8
- 0x200c is equivalent to \textcompwordmark
- 0x2011 is equivalent to \nobreakdash-
- 0x2009 is a breakable thin space (the old definition was non-breakable)
- 0x202f is a non-breakable thin space
- add spaces 0x2007, 0x2008, 0x200a and 0x200b
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@40694 a592a061-630c-0410-9148-cb99ea01b6c8
lyx2lyx: Clean up the convert/revert queue.
LaTeXFeatures: Just add cancel to the list of packages that are
simply used with a \usepackage{} line.
Uwe: In case cancel needs to be loaded after amsmath or something,
please revert my changes to LaTeXFeatures and add a comment
about package ordering to the source. Thanks.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@40667 a592a061-630c-0410-9148-cb99ea01b6c8
This is already supported in Converters::convert() and needed e.g. for
eps2->eps conversion.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@40649 a592a061-630c-0410-9148-cb99ea01b6c8
This also fixes other float-related bugs, such as this:
* select two floats in two consecutive paragraphs and insert a new float around them
=> the master float's caption is put into the lower subfloat instead of below the subfloats.
In the long term, doInsertInset needs a thorough cleanup.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@40639 a592a061-630c-0410-9148-cb99ea01b6c8
as the tooltip. This isn't redundant, since the TOC itself might
truncate the display string.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@40626 a592a061-630c-0410-9148-cb99ea01b6c8
then trying to compile.
There are really two problems here. One is that the renamed
buffer needs to be reloaded. All kinds of files, etc, may not
exist any more, if we've been saved to a new directory; our
children e.g. may not be in the right place. And, in this case,
we may no longer be a child of our old parent. Reloading will
fix all of that.
On reload, though, we need to clear our parent, since we may
not have one any more. It will get reset if need be.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@40609 a592a061-630c-0410-9148-cb99ea01b6c8
The type of citation engine is determined by the citation package
being used and, in the case of natbib, its options.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@40593 a592a061-630c-0410-9148-cb99ea01b6c8
To avoid duplicity, remove natbib_authoryear and natbib_numerical
and replace them by natbib, and keep track of the engine `type'
in the new \cite_engine_type document setting. This will make it
easier to add more citation engines.
LyX format incremented to 424.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@40592 a592a061-630c-0410-9148-cb99ea01b6c8
tex2lyx does not need a -p command since it detects partial files automatically.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@40591 a592a061-630c-0410-9148-cb99ea01b6c8
A real fix would be to ditch the home made file format detection and use libmagic.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@40587 a592a061-630c-0410-9148-cb99ea01b6c8
Gcc 4.7 warns that this kind of narrowing is illegal in C++11, so
we can just as well fix that right now.
In GuiFontMetrics this is fixed by chaning the types in the AscendDescend struct
from short int to int.
In ParagraphMetrics it is fixed by addint explicit casts.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@40586 a592a061-630c-0410-9148-cb99ea01b6c8
Gcc 4.7 warns rightly about the questionalble practise of having different types in
the ?: operator. This patch fixes that.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@40585 a592a061-630c-0410-9148-cb99ea01b6c8
also when switching from an editable buffer to a read-only buffer,
without waiting for the moment in which the dialog is focused.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@40582 a592a061-630c-0410-9148-cb99ea01b6c8
Internal machinery, no file format change and no UI change yet
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@40562 a592a061-630c-0410-9148-cb99ea01b6c8
This option is set to true by default as this is the most widespread use case.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@40515 a592a061-630c-0410-9148-cb99ea01b6c8
from the citation package being used or from a \bibliographystyle
command in the preamble, if any>
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@40499 a592a061-630c-0410-9148-cb99ea01b6c8
the name we are trying to write in the BufferList, since the file
gets a name when it is created.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@40489 a592a061-630c-0410-9148-cb99ea01b6c8
Previous commit did not distinguish whether the changes were applied or cancelled.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@40487 a592a061-630c-0410-9148-cb99ea01b6c8
iff bibliography settings are changed in the document settings.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@40486 a592a061-630c-0410-9148-cb99ea01b6c8
This holds the name of a BibTeX style file for now. Any BibTeX inset
can set the style to "default" to use the document-wide style.
LyX format incremented to 420.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@40484 a592a061-630c-0410-9148-cb99ea01b6c8
a new paragraph, which is very annoying. This commit fixes this bug.
If anyone has a better idea, please let me know. I posted to devel
about it but got no response.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@40456 a592a061-630c-0410-9148-cb99ea01b6c8
now) and move more packages to the new exclude mechanism.
The remaining ones are not so easy.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@40442 a592a061-630c-0410-9148-cb99ea01b6c8
tells LyX not to show BLOCK text as justified, but still keeps
the usual paragraph indentation.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@40427 a592a061-630c-0410-9148-cb99ea01b6c8
over-writing a file that is already open. So we issue a warning and
ask if they'd like to try a different name.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@40420 a592a061-630c-0410-9148-cb99ea01b6c8
- let icons install into proper locations
- use theme routines to load proper icon
(using this for loading toolbar icons would be another
step how to synchronize LyX with its environment.)
Patch from Timo Kluck.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@40418 a592a061-630c-0410-9148-cb99ea01b6c8
for this yet, however.
Includes elements of a patch by Rob Oakes.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@40409 a592a061-630c-0410-9148-cb99ea01b6c8
(i) Validate even for comments when outputting XHTML.
(ii) Output comments as divs hidden by default. Then people
can display them other ways if they wish.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@40400 a592a061-630c-0410-9148-cb99ea01b6c8
LFUN_INSERT_PLAINTEXT is handled in GuiView because it might need to ask for a filename. But if the filename is given as a paramater we can handle it in BufferView immediately. Also, when we've asked for the filename in GuiView we should dispatch the LFUN to BufferView in order to properly use the Undo mechanism.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@40377 a592a061-630c-0410-9148-cb99ea01b6c8
"from-dialog" is added to the LFUN_INSET_MODIFY function when it is issued from the table settings dialog. This is done to prevent the checking of the individual parameters, because it has to consider all parameters alltogether. Besides, when issued from the dialog it is already guaranteed that the parameters are valid.
This parameter should not be passed onto tabularfeatures.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@40376 a592a061-630c-0410-9148-cb99ea01b6c8
The trick is to rely on Cursor::selHandle instead of fiddling with the selection
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@40372 a592a061-630c-0410-9148-cb99ea01b6c8
A complete fix is currently impossible because LyX assumes that all longtable
captions are in the first head.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@40361 a592a061-630c-0410-9148-cb99ea01b6c8
We split Buffer::clone() into various routines that know whether
to clone the children.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@40357 a592a061-630c-0410-9148-cb99ea01b6c8
we will be cautious, of course). The problem was that we were issuing
the Buffer::changed() signal before we did updateBuffer(), and this
caused an inconsistency. The idea here is to defer issuing this signal
until we call processUpdateFlags(). We know we need a redraw if we've
deleted a whole paragraph.
This should work properly, so long as checkDepm is called from within
the dispatch mechanism. There may, however, be other paths, and I've
noted one explicitly with a FIXME in Text2.cpp. I've tested a few
different variations, however, and I haven't seen any problems. But if
we do run into problems, we can go ahead and do the update there that we
were previously doing in checkDepm itself.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@40352 a592a061-630c-0410-9148-cb99ea01b6c8
It is valid for a label to be empty, but up to now the bibliography
information was not updated when a label was emptied.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@40347 a592a061-630c-0410-9148-cb99ea01b6c8
from the context menu. As mentioned in the FIXME, we cannot now
handle the case where the branches are held in a master buffer.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@40334 a592a061-630c-0410-9148-cb99ea01b6c8
registration mechanism, so that they are only swallowed if LyX will load them.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@40315 a592a061-630c-0410-9148-cb99ea01b6c8
In this case, the inset parameters win in case there is any conflict. The only
exception is "type=eps", since I was too lazy to make the full keyval parser
of tex2lyx available to InsetGraphics in order to parse the special parameter.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@40298 a592a061-630c-0410-9148-cb99ea01b6c8
we've put something into it. (We also don't need to copy an
empty string into it.)
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@40240 a592a061-630c-0410-9148-cb99ea01b6c8
If we want to look at the token after the next token, it may be needed
to call tokenize_one() twice and not only once as done in good().
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@40234 a592a061-630c-0410-9148-cb99ea01b6c8
The global list of cloned buffers was a bad idea. We don't have multiple
export threads, but we can have multiple autosave threads. So now we keep
more than one of these lists at the same time, and each cloned buffer has
a pointer to the relevant list. Note that this would make multiple export
possible, if we wanted to do that at some time.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@40227 a592a061-630c-0410-9148-cb99ea01b6c8
the destructor since we could, in some cases, end up deleting them
multiple times. So we need to keep a list of the Buffers we need to
delete, kind of like the BufferList.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@40205 a592a061-630c-0410-9148-cb99ea01b6c8
replace home made keyval parsing with the more robust process_keyval_opt().
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@40185 a592a061-630c-0410-9148-cb99ea01b6c8
to occur in pairs.
If you change something in tex2lyx please don't commit without running the
tests and ensuring that no warnings or errors are written on stderr.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@40177 a592a061-630c-0410-9148-cb99ea01b6c8
- support for \makebox
- fix import of boxes without an inner box (the on-screen display was broken because of wrong default width setting)
- fix parsing of \framebox{content}, which LyX does not support yet - we have to use ERT
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@40150 a592a061-630c-0410-9148-cb99ea01b6c8
This is a candidate for branch too, although the bug is minor.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@40149 a592a061-630c-0410-9148-cb99ea01b6c8
Of course this will only work if output_changes was true when creating the
.tex file.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@40139 a592a061-630c-0410-9148-cb99ea01b6c8
Also a warning "\end{foo} does not match \begin{bar}" is gone.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@40133 a592a061-630c-0410-9148-cb99ea01b6c8
file names with a proper one: Only replace dots in the base name, and only
request the lyxdot feature if it is needed. This is a partial fix of bug #7650.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@40115 a592a061-630c-0410-9148-cb99ea01b6c8
We need to have a special callback for when the autosave thread is finished
such that we can process the return values properly (and different as in
case of export or preview).
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@40103 a592a061-630c-0410-9148-cb99ea01b6c8
under Document>Settings>Output.
It turns out that we always want this list to be sorted when we get it,
so we can sort it in BufferParams rather than in three different places.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@40101 a592a061-630c-0410-9148-cb99ea01b6c8
the complete document whether LyX will load them or not.
Use the mechanism for the color package (fixes the color part of bug #7845).
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@40095 a592a061-630c-0410-9148-cb99ea01b6c8
but the title commands in the preamble are still not recognized.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@40093 a592a061-630c-0410-9148-cb99ea01b6c8
- Let all doExport calls honor maintain_unincluded_children
- Also don't let the behaviour depend on supplying the result_file parameter
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@40085 a592a061-630c-0410-9148-cb99ea01b6c8
Documentation (and perhaps menu items) need still to be a bit
clarified in order to distinguish the various paste options
for the average user.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@40060 a592a061-630c-0410-9148-cb99ea01b6c8
for later calls. The check is only performed on the major version
number, such as to avoid using python 3.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@40049 a592a061-630c-0410-9148-cb99ea01b6c8
TODO:
- Also let the public function return an error value,
- Move all user interaction (Alerts etc.) out of Buffer.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@40044 a592a061-630c-0410-9148-cb99ea01b6c8
TODO:
- Also let the public function return an error value,
- Move all user interaction (Alerts etc.) out of Buffer.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@40043 a592a061-630c-0410-9148-cb99ea01b6c8
All calls to doExport from outside of Buffer have the same algorithm to
determine whether the included children parameter should be true. Moreover,
this decision is only based on information from the Buffer itself.
Now, Buffer only has 1 public function doExport and preview.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@40041 a592a061-630c-0410-9148-cb99ea01b6c8
- This preference was used for specifying the papersize to xdvi, dvipdfm,
dvips. However, I can't seem to see any effect on the result.
- The papersize should instead be defined in the document settings.
- The global papersize default was misused to also change the tex
output by specifying the papersize as if it was specified in the
document settings. This caused the same lyx document to be outputted
differently on different pcs.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@40028 a592a061-630c-0410-9148-cb99ea01b6c8
- update preamble to the features used in the file
- add some floats
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@40024 a592a061-630c-0410-9148-cb99ea01b6c8
The LyX buffer is cloned before autosaving, but the unnamed_ member was not
copied. This causes the autosave files to end up in the wrong location and
consequently they were never removed afterwards.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@40008 a592a061-630c-0410-9148-cb99ea01b6c8
and menus. The newline we were writing previously caused all kinds
of problems. Writing a whole array in some cases would also cause
problems. So we do less.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@39971 a592a061-630c-0410-9148-cb99ea01b6c8
(info I missed in r39965: beraserif.sty does not exist on CTAN, Bera's sansserif is named "berasans" and is already supported by tex2lyx)
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@39968 a592a061-630c-0410-9148-cb99ea01b6c8
(the tex2lyx support in branch for \printnomenclature is currently broken so this must be backported to branch for 2.0.2, OK Richard?)
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@39960 a592a061-630c-0410-9148-cb99ea01b6c8
- support for box background color, document fontcolor and background color (note_fontcolor was already supported)
- add colors and a nested box to the testfile
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@39949 a592a061-630c-0410-9148-cb99ea01b6c8
I also added 2 FIXME where we should not call GuiView directly.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@39948 a592a061-630c-0410-9148-cb99ea01b6c8
- Interpret argument of LFUN_SPACE_INSERT correctly
- Use InsetMathSpace instead of InsetMathSpecialChar for "\ " (bug # 7728)
- Use InsetMathSpace instead of InsetMathChar for ~ (bug # 7728).
This fixes also the display in LyX (previously a literal ~ was displayed).
Using InsetMathSpace enables also the "Insert Formatting" menu entries.
No file format change is needed, since the LaTeX export is unchanged.
Note that there are still some bugs related to spaces in math:
#7746, #7747, #7749, #7842
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@39947 a592a061-630c-0410-9148-cb99ea01b6c8
utf8 strings, and not only if they contain encoding changes. This is
because if the output encoding was previously changed and an utf8
string is inserted in the stream, the encoding changes cannot occur.
This was not a problem until now because normal strings could not be
inserted in a odocstream, as them would have been exchanged with encoding
changes. Indeed, the SetEnc struct has only a std::string member and
outputting a std::string would be interpreted by the compiler the same
as inserting setEncoding(std::string). However, a std::string can be
inserted in an otexstream and it is better to account for this.
I wonder whether trying "os << std::string", where os is an odocstream,
should produce an error instead of actually trying to change the stream
output encoding, but this has not been a problem until now...
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@39944 a592a061-630c-0410-9148-cb99ea01b6c8
and not for utf8 ones. But the simple solution is to convert to a
docstring before outputting to the underlying docstream.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@39930 a592a061-630c-0410-9148-cb99ea01b6c8
on the fly are only available for ucs4 encoded strings and not for utf8
ones. So, it does only work with docstrings.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@39928 a592a061-630c-0410-9148-cb99ea01b6c8
406: Convert noweb layouts to new syntax (untested, see bug #7838)
407: Nothing to do (empty lyx2lyx conversion)
408: Activated the already existing script inset code
409: Nothing to do (tex2lyx does not support XeTeX)
410: Nothing to do (the old code already used the new layouts)
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@39923 a592a061-630c-0410-9148-cb99ea01b6c8
402: Nothing to do (tex2lyx does not support bibtotoc)
403: Nothing to do (the old code already used the new layouts, bug #7780)
404: Nothing to do (write new prettyref syntax)
405: Nothing to do (empty lyx2lyx conversion)
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@39920 a592a061-630c-0410-9148-cb99ea01b6c8
400: Convert \lyxline to new InsetLine syntax
401: Nothing to do (empty lyx2lyx conversion)
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@39919 a592a061-630c-0410-9148-cb99ea01b6c8
This restores \input@path handling, which turns out to be necessary, as
the TEXINPUTS mechanism is not used with relative paths. It turns out
that both methods must be used, because \input@path does not work in all
cases (most notably with tikz).
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@39918 a592a061-630c-0410-9148-cb99ea01b6c8
394: Added use_makebox parameter to InsetBox
395: Nothing to do (empty lyx2lyx conversion)
396: Nothing to do (empty lyx2lyx conversion)
397: Nothing to do (tex2lyx does not support nameref)
398: Nothing to do (empty lyx2lyx conversion)
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@39916 a592a061-630c-0410-9148-cb99ea01b6c8
379: Nothing to do (html output changes)
380: Nothing to do (empty lyx2lyx conversion)
381: Nothing to do (empty lyx2lyx conversion)
382: Activated already prepared notefontcolor code
383: Nothing to do (empty lyx2lyx conversion)
384: Nothing to do (empty lyx2lyx conversion)
385: Nothing to do (empty lyx2lyx conversion)
386: Nothing to do (empty lyx2lyx conversion)
387: Nothing to do (empty lyx2lyx conversion)
388: Nothing to do (empty lyx2lyx conversion)
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@39912 a592a061-630c-0410-9148-cb99ea01b6c8
369: Nothing to do (empty lyx2lyx conversion)
370: Nothing to do (empty lyx2lyx conversion)
371: Added \use_mhchem parameter
372: Nothing to do (empty lyx2lyx conversion)
373: Nothing to do (the old version was wrong since it used the new g-brief
layout files with the old file format)
374: Nothing to do (html output changes)
375: Nothing to do (empty lyx2lyx conversion)
376: Nothing to do (empty lyx2lyx conversion)
377: Nothing to do (empty lyx2lyx conversion)
378: Nothing to do (empty lyx2lyx conversion)
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@39911 a592a061-630c-0410-9148-cb99ea01b6c8
357: Added comment about \underbar and \ulem
358: Nothing to do (empty lyx2lyx conversion)
359: Nothing to do (empty lyx2lyx conversion)
360: Nothing to do (empty lyx2lyx conversion)
361: Nothing to do (empty lyx2lyx conversion)
362: Nothing to do (empty lyx2lyx conversion)
363: Nothing to do (empty lyx2lyx conversion)
364: Nothing to do (empty lyx2lyx conversion)
365: Nothing to do (empty lyx2lyx conversion)
366: Nothing to do (empty lyx2lyx conversion)
367: Nothing to do (empty lyx2lyx conversion)
368: Nothing to do (empty lyx2lyx conversion)
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@39910 a592a061-630c-0410-9148-cb99ea01b6c8
352: New syntax for InsetIndex and printindex command inset
353: Nothing to do (empty lyx2lyx conversion)
354: Nothing to do (empty lyx2lyx conversion)
355: Nothing to do (empty lyx2lyx conversion)
356: Nothing to do (empty lyx2lyx conversion)
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@39897 a592a061-630c-0410-9148-cb99ea01b6c8
346: Nothing to do (swiss german is not supported by babel/polyglossia)
347: Nothing to do (empty lyx2lyx conversion)
348: Nothing to do (empty lyx2lyx conversion)
349: Nothing to do (empty lyx2lyx conversion)
350: Nothing to do (empty lyx2lyx conversion)
351: Nothing to do (empty lyx2lyx conversion)
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@39896 a592a061-630c-0410-9148-cb99ea01b6c8
This reverts commit r39809. Some LFUNs require newline characters,
and while at the moment we don't have a proper interface for such
LFUNs, copy-pasting newlines has been a long-time workaround.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@39893 a592a061-630c-0410-9148-cb99ea01b6c8
Now you can also require a|b|c, and if any of the features is already used,
no other one will be loaded. The first feature wins if none is already used.
This is required for a part of bug #7811.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@39884 a592a061-630c-0410-9148-cb99ea01b6c8
List environments (as the one in the bug report) can't
be handled correctly in tex2lyx as long as LyX does not allow contents
after the environment start but before the first \item.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@39871 a592a061-630c-0410-9148-cb99ea01b6c8
issue, but brings less noise about memory leaks when using valgrind).
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@39864 a592a061-630c-0410-9148-cb99ea01b6c8
avoids a useless object creation, as Qt tolerates the
pointer to be null as well.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@39863 a592a061-630c-0410-9148-cb99ea01b6c8
A long standing bug has been fixed in GCC 4.7, the bug was a non-
sactioned extra lookup. This caused some code to work that really
shouldn't.
The fixes are: add this->, Class::, or move functions about
as required to fullfill the rules.
In this case some template instantiations
where move to after what they reference.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@39813 a592a061-630c-0410-9148-cb99ea01b6c8
Keeping some debugging output about these filename mangling, in case additional debugging is needed.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@39812 a592a061-630c-0410-9148-cb99ea01b6c8
I actually got it by this bug while copy-pasting LFUNs into the toolbar.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@39809 a592a061-630c-0410-9148-cb99ea01b6c8
The init_package before easyParse is necessary to initiate the default
values for userdir and sysdir, which are now part of the help message.
This step would be necessary anyway if we ever internationalize tex2lyx.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@39799 a592a061-630c-0410-9148-cb99ea01b6c8
Let's have this in trunk for testing. The real difference maker
when it comes to color is whether we use dvipng or ghostscript.
For dvipng:
- The color info is passed as command-line arguments.
- The tightpage option is not necessary, and since it adds
ps specials to the output, we shouldn't use it.
For ghostscript:
- The color info needs to be in the latex file.
- The foreground color is set for each preview inset.
- The background color is set by \pagecolor in the preamble,
which is understood by pdflatex, but ignored in dvips mode.
Thus dvips is handled with a ps special.
- The tightpage option is necessary to crop the images.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@39797 a592a061-630c-0410-9148-cb99ea01b6c8
a special method to find \endregexp{}}, not merely the closing brace.
This is now obsolete, so ok to remove this dead code.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@39780 a592a061-630c-0410-9148-cb99ea01b6c8
Fix a bug introduced in r26547. Also reorders the entries for
natbib-numerical into a more natural, visually pleasing order.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@39777 a592a061-630c-0410-9148-cb99ea01b6c8
environment variables. So, replace single quotes by double ones, such that
the QProcess parser will strip them, and strip them by ourselves in ForkedCall.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@39761 a592a061-630c-0410-9148-cb99ea01b6c8
in the filesystem encoding, i.e., the local 8 bit encoding.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@39760 a592a061-630c-0410-9148-cb99ea01b6c8
don't delimiting an entire word and adapt the quoting such that it works
for Systemcall, ForkedCall, and also for the case when QProcess in not used.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@39759 a592a061-630c-0410-9148-cb99ea01b6c8
but only that of the launched QProcess.
This will help changing the code in order to manage in a central place
the LaTeX environment, thus avoiding the current code duplication in
Systemcall and ForkedCalls.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@39754 a592a061-630c-0410-9148-cb99ea01b6c8
Set a validator on QLineEdit widgets. The validator removes any
\n and \r characters, thus preventing users from copy-pasting
newline characters into these fields, and subsequently saving
them, inadvertantly, to their lyx file.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@39745 a592a061-630c-0410-9148-cb99ea01b6c8
Caching the string value of extensions is not necessary. It
was a nice textbook exercise in getter/setter methods but it
is cause for confusion and prone to mistakes in maintenance.
Also, extension_list_ doesn't need to be mutable.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@39714 a592a061-630c-0410-9148-cb99ea01b6c8
They were implementation-specific and do not impact on the interface anyway.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@39709 a592a061-630c-0410-9148-cb99ea01b6c8
(e.g., compressed dia, odg, sxd, ...). These need to be marked via the "zipped=native" flag in the RC file.
The old 'dia' configuration is automatically updated (it used to be hardcoded in the code, now it is handled
via the flag).
See also http://www.mail-archive.com/lyx-devel@lists.lyx.org/msg170974.html
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@39705 a592a061-630c-0410-9148-cb99ea01b6c8
text which is not explicitly marked in a different language, irrespective
of the multilingual status, except for LTR<=>RTL changes.
See discussion in this thread:
http://thread.gmane.org/gmane.editors.lyx.devel/138380
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@39702 a592a061-630c-0410-9148-cb99ea01b6c8
The patch fixes a case that I had forgotten. Namely, the case that when the height of a row was larger than the height of the screen and that the cursor is already visible. That's why I added a new if case to catch all situations in which the row height is larger than the height of the screen. If we then need scrolling we scroll to height/4 and 3*height/4. In the end, the height_/4 and 3*height_/4 should be replaced by the rowheights in the inset, but we need some extra infrastructure for that.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@39697 a592a061-630c-0410-9148-cb99ea01b6c8
This will disable the layout box if no document is open, and it will set the correct state of the toolbar toggling buttons.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@39694 a592a061-630c-0410-9148-cb99ea01b6c8
- Remove hack with $$AbsOrRelPath substitution in the guiName.
Instead, let LyX display the filename automatically in the gui,
consistent with InsetInclude.
- Use the guiName in the drop-down menu in the dialog instead of the
internal lyxName. These guiNames ought to be more descriptive.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@39675 a592a061-630c-0410-9148-cb99ea01b6c8
Add an empty filter for listings and verbatim includes. This will
display as the standard string "All files (*)".
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@39673 a592a061-630c-0410-9148-cb99ea01b6c8
- Correctly interpret whether a file description is available.
This description is later displayed in the file filters in the
import dialog (and other dialogs using this qt helper).
- Fix the regex so that "LaTeX (plain) (*.tex)" is correctly parsed
into a description "LaTeX (plain) " and its corresponding filter.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@39672 a592a061-630c-0410-9148-cb99ea01b6c8
- Add "htm" as a known extension for HTML.
- Use all the extensions of a format as file filter,
instead of using only the default extension.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@39671 a592a061-630c-0410-9148-cb99ea01b6c8
Additionnal extensions are separated by commas (,) in lyxrc
preference files, while spaces are ignored, e.g. "jpg, jpeg".
Preference lyxrc file format incremented to 2.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@39670 a592a061-630c-0410-9148-cb99ea01b6c8
Set a validator on QLineEdit widgets. The validator removes any
\n and \r characters, thus preventing users from copy-pasting
newline characters into these fields, and subsequently saving
them, inadvertantly, to the preference file.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@39664 a592a061-630c-0410-9148-cb99ea01b6c8
- Japanese is now handled by passing the option --latex=platex
to the standard lyxpreview script. This is done in PreviewLoader.
- Remove obsoleted file lyxpreview-platex2bitmap.py and the
corresponding lines in the configure script.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@39659 a592a061-630c-0410-9148-cb99ea01b6c8
- Handle the preprocessing in the main lyxpreview script with the
command-line arguments --lilypond and --lilypond-book=exe.
- Remove the obsoleted file lyxpreview-lytex2bitmap.py and the
corresponding lines in configure.py.
Fix for the japanese preview still to come.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@39658 a592a061-630c-0410-9148-cb99ea01b6c8
Add command-line arguments in a standard unix fashion, using getopt.
Usage: ./lyxpreview2bitmap.py <options> <input file>
Options:
-h, --help: Show this help screen and exit
--dpi=<res>: Resolution per inch (default: 128)
--png, --ppm: Select the output format (default: png)
--fg=<color>: Foreground color (default: black, ie '000000')
--bg=<color>: Background color (default: white, ie 'ffffff')
--latex=<exe>: Specify the executable for latex (default: latex)
The colors are hexadecimal strings, eg 'faf0e6'.
The changes to PreviewLoader.cpp break the preview of lilypond-book
and japanese files, but they will be handled in the next commits.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@39657 a592a061-630c-0410-9148-cb99ea01b6c8
ability to take the symbol from an explicit or implicit selection.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@39651 a592a061-630c-0410-9148-cb99ea01b6c8
../../src/support/mythes/mythes.hxx:25:9: error: ‘FILE’ does not name a type
../../src/support/mythes/mythes.hxx:55:22: error: ‘FILE’ has not been declared
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@39580 a592a061-630c-0410-9148-cb99ea01b6c8
- \negmedspace and \negthickspace outside of math
- \enspace, \hspace*, \hspace*{\fill} and \hfill inside math
(fileformat change)
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@39557 a592a061-630c-0410-9148-cb99ea01b6c8
Corresponding test-case needed a fix as well and now it is passed.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@39518 a592a061-630c-0410-9148-cb99ea01b6c8
When a document is not multi-lingual the text contents is changed
to the new language. This should be recorded for Undo.
Because Undo wants a cursor the implemantation has to be
moved to the BufferView class.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@39508 a592a061-630c-0410-9148-cb99ea01b6c8
The fix also allows to execute again batch files when using runCommand.
Unfortunately, this is still not possible with QProcess as that code is not
under our control.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@39504 a592a061-630c-0410-9148-cb99ea01b6c8
- After introducing the displayed vertical alignment for tables, we met for the first time situations in which row.ascent is very large. To make sure the scrolling still works, we have to do the same as we did for rows with a large descent.
- change row.ascent into defaultRowHeight. Before the above mentioned change, row.ascent usually was approximately the same as defaultRowHeight (by chance). However, it is now clear we don't really want row.ascent here.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@39486 a592a061-630c-0410-9148-cb99ea01b6c8
and invoke the previewer with only its filename without the path.
This solves the problem about forward search on Windows reported here:
http://thread.gmane.org/gmane.editors.lyx.general/71130
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@39410 a592a061-630c-0410-9148-cb99ea01b6c8
The PreviewLoader is created directly by Buffer on demand. The PreviewLoader cache was complex and unneeded because there is one and only one PreviewLoader per Buffer.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@39276 a592a061-630c-0410-9148-cb99ea01b6c8
I don't think we need to record anything yet, since we are not changing
anything here. The dialog will call a new LFUN to do the change.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@39253 a592a061-630c-0410-9148-cb99ea01b6c8
* uniqueLabel(docstring & label) to enforce label unicity
* updateLabel() to update only the label.
* InsetLabel::updateLabelAndRefs() to update label & refs
* InsetLabel::updateReferences() to update the references
This fixes bug #7655
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@39250 a592a061-630c-0410-9148-cb99ea01b6c8
Added corresponding regression tests findadv-re-01 and -02 for finding these special characters.
Unfortunately, braces {} are a little bit special and don't work yet. Added findadv-re-03 regression test to not forget about this case.
This goes along the line of fixing issues reported by Andrew Parsloe and summarised as #7638.
Last note: Still there will be cases when the Advanced F&R won't work, especially if the text to be found and/or the search pattern is preceded by backslashes or others.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@39135 a592a061-630c-0410-9148-cb99ea01b6c8
(hunspell 1.3 is not correctly recognized otherwise).
Patch from Rex Dieter, posted by Jose.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@39040 a592a061-630c-0410-9148-cb99ea01b6c8
This is needed when instant preview is on,
so we avoid the empty preview due to latex compilation error.
Fixing issue 1. reported at: http://permalink.gmane.org/gmane.editors.lyx.devel/136992.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@39015 a592a061-630c-0410-9148-cb99ea01b6c8
the moc invocation to add the proper define for QT_VERSION.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@38995 a592a061-630c-0410-9148-cb99ea01b6c8
It's amazing we haven't seen problems with this before. The basic problem is that buf.errorList("whatever") would always return the same global, static error list, if it did not already exist. So, to a significant extent, there was only one global error list!
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@38980 a592a061-630c-0410-9148-cb99ea01b6c8
It's amazing we haven't seen problems with this before. The basic problem is that buf.errorList("whatever") would always return the same global, static error list, if it did not already exist. So, to a significant extent, there was only one global error list!
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@38978 a592a061-630c-0410-9148-cb99ea01b6c8
that is the language we use elsewhere.
Also took the opportunity to fix some shortcuts.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@38930 a592a061-630c-0410-9148-cb99ea01b6c8
Basically, patch adds routine that calcuates relative paths to parent
rather than child directories.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@38915 a592a061-630c-0410-9148-cb99ea01b6c8
For example, this wasn't allowing to match '\beta\alpha' in the sequence '\alpha\beta\alpha', as
in the accompanying regression test-case (added case for ignore-format off).
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@38888 a592a061-630c-0410-9148-cb99ea01b6c8
For example, this wasn't allowing to match '\beta\alpha' in the sequence '\alpha\beta\alpha', as
in the accompanying regression test-case.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@38883 a592a061-630c-0410-9148-cb99ea01b6c8
defined there, also while using the dialog from the Adv F&R WAs.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@38866 a592a061-630c-0410-9148-cb99ea01b6c8
Added accompanying regression tests for displayed math and numbered equations.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@38860 a592a061-630c-0410-9148-cb99ea01b6c8
viewer to give us sensible information, but that information may be out-
generated. So we need to check and make sure the values we get are
valid.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@38859 a592a061-630c-0410-9148-cb99ea01b6c8
This allows to pick and search for citations present in the main document.
This was started to be discussed in a relatively unrelated bug #7581, then the patch
was proposed here: http://www.mail-archive.com/lyx-devel@lists.lyx.org/msg169277.html
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@38847 a592a061-630c-0410-9148-cb99ea01b6c8
For example, before this footnotes were not correctly found.
Added also accompanying regression test.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@38846 a592a061-630c-0410-9148-cb99ea01b6c8
the same document could not be rendered.
Problem was that we were using children_positions to deal with the
included documents. That structure only includes each child once.
We need to use position_to_children, instead.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@38842 a592a061-630c-0410-9148-cb99ea01b6c8
the macros declared in the parent do not work. This is because we were
cloning only the child, which then didn't have a parent.
The solution is to clone the whole structure, starting with the master
document. As a side effect, we only clone each child once.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@38837 a592a061-630c-0410-9148-cb99ea01b6c8
Thus, we can't rely on the returned timestamp being -1 if a pdf doesn't exist.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@38835 a592a061-630c-0410-9148-cb99ea01b6c8
from the main document WA to the find/replace WAs (in addition
to the language, as required for addressing #6560).
I'm not cloning the whole BufferParams because we learned
from
http://www.mail-archive.com/lyx-devel@lists.lyx.org/msg168175.html
that, for example, if we inherit the default master by mistake,
then we may run into problems.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@38819 a592a061-630c-0410-9148-cb99ea01b6c8
2.) Read the PATCH_VERSION from configure.ac too
3.) Ident-text in script
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@38804 a592a061-630c-0410-9148-cb99ea01b6c8
BufferView::dispatch(), and the screen update is done properly there.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@38779 a592a061-630c-0410-9148-cb99ea01b6c8
in LyXRC::write(), i.e., by listing RC_LAST as the first item in the switch.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@38738 a592a061-630c-0410-9148-cb99ea01b6c8
Always wondered why I had to restart LyX after changing the PATH prefix.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@38736 a592a061-630c-0410-9148-cb99ea01b6c8
by Jan Paul Imhoff. The problem was that we were assuming (as we still
do in some places) that there are always at least two cells.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@38717 a592a061-630c-0410-9148-cb99ea01b6c8
multicell inset, where we now export all of the cells
separated by "\t", instead of only the first cell.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@38712 a592a061-630c-0410-9148-cb99ea01b6c8
Otherwise, we were asking to construct strings of random size at a
certain point, e.g., two 2GB strings, in one case I saw.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@38704 a592a061-630c-0410-9148-cb99ea01b6c8
This was an attempt to fix#2743 without re-working the InsetBibitem
mess. It didn't work, so we have to do that.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@38702 a592a061-630c-0410-9148-cb99ea01b6c8
variable. This is done in the preferences, much like as the PATH prefix.
A single '.' in the paths will get replaced with the current document dir
and also non-absolute paths will be prefixed with that dir.
The default semantics of TEXINPUTS apply, such that, for example, if a
path is terminated with a double slash, all subdirectories will be also
searched by both the TeX engine and ancillary programs such as dvi
previewers or dvips. As an example, if the prefix is set to ".:figs", the
TEXINPUTS variable will be set as ".:<docdir>:<docdir>/figs:$ORIGTEXINPUTS",
where <docdir> is the document directory.
The initial '.' is necessary to address the actual current dir (this will
be the temp dir at preview time), while if TEXINPUTS was initially unset,
such that $ORIGTEXINPUTS is empty, a colon (or semicolon on Windows) will
end the path list. This is very important, because we don't want to replace
the system directories but to complement them and, in order to do that, an
empty element has to be present in the list. Indeed, according to the
TEXINPUTS semantics, an empty element means the standard search path.
This works whether TEXINPUTS is originally set or not, because if the
original TEXINPUTS starts with a colon (meaning that the standard search
path is wanted there) we will have an empty element at that point,
otherwise the final colon will simply serve as a path separator.
Of course, on Windows a ';' has to be used as a path separator. LyX will
take care of transforming the platform path list into one understandable
by the TeX engine. For example, this will be the case for a Cygwin version
of LyX using a native Windows TeX engine or viceversa. I tested all of
this and it works for me.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@38681 a592a061-630c-0410-9148-cb99ea01b6c8
We clear the refernce cache so that we won't get conflicts with labels
that get pasted into the buffer. We should update this before its being
empty matters. If not (i.e., if we encounter bugs), then this should
instead be:
cur.buffer().updateBuffer();
But we'll try the cheaper solution in trunk.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@38680 a592a061-630c-0410-9148-cb99ea01b6c8
It must have been wrong before the updateBuffer() refactoring, too.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@38676 a592a061-630c-0410-9148-cb99ea01b6c8
We are missing the updateBuffer() call when we go through
mouseEventDispatch(). A consequence of the massive updateBuffer()
refactoring. Wish it had been caught before...
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@38667 a592a061-630c-0410-9148-cb99ea01b6c8
a number of unforeseen issues (like the inheritance of the default master, as
pointed out in http://www.mail-archive.com/lyx-devel@lists.lyx.org/msg168225.html),
now we simply set the language into the search & replace buffers.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@38647 a592a061-630c-0410-9148-cb99ea01b6c8
layout to the current format.
This probably isn't needed for branch, since local layout was a
"hidden feature" prior to 2.0, and one can update local layout by:
(a) copying to a file
(b) running layout2layout on that file
(c) pasting back into LyX
So we should probably just leave this in trunk.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@38622 a592a061-630c-0410-9148-cb99ea01b6c8
inset to know that the BibTeX data had changed. So we introduce a
Buffer-wide variable that we can query for that information.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@38619 a592a061-630c-0410-9148-cb99ea01b6c8
calls into the file writing routines and out of doExport(). They were in
both places before: Called once in doExport, and then again in the e.g.
writeLaTeXSource()---and then again, actually, in validate().
It is possible this will reveal some missing updateBuffer() calls
somewhere. But it should somewhat speed up View>Source, since we now do
not do an extra set of such calls in that routine. Rather, we rely upon
the Buffer's having been made up to date first, by the updateBuffer()
call after dispatch.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@38596 a592a061-630c-0410-9148-cb99ea01b6c8
Now it is no longer needed to use a tree that was never used for building
for remerging .po files.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@38585 a592a061-630c-0410-9148-cb99ea01b6c8
assure to switch to math mode if needed. This helps avoiding latex
errors (see http://thread.gmane.org/gmane.editors.lyx.general/69580)
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@38579 a592a061-630c-0410-9148-cb99ea01b6c8
Something went wrong with a script while previewing a document and now
I have to wait for 30 minutes for quitting LyX without killing it.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@38578 a592a061-630c-0410-9148-cb99ea01b6c8
As the bug report notes, you do NOT get this crash if you move up or
down in the table a bit before you do the rest. The reason is that
moving up and down sets the cursor's x_target_, and it is because that
is not set that we enter the other code at all and eventually crash.
That is, in InsetTabular's dispatch, we have:
(*) cur.pos() = tm.x2pos(cur.pit(), pm.rows().size()-1, cur.targetX());
You can see the potential for trouble here already. cur.pit() is in the
NEW cell, i.e., the one to which we are moving; it was changed a few
lines previously, and cur.idx() points to the new cell, too. But we are
trying to calculate cur.pos(), which means that cur.pos() is currently
the one from the OLD cell. So the cursor is in an inconsistent state.
Calling cur.targetX() leads us to call Cursor::getPos(), and that is
what causes the crash.
We fix the problem by making sure we call targetX() on the original
cursor. The same problem clearly exists in the DOWN stuff, so we fix
that, too.
By the way, should we be setting x_target_ here once we have calculated
it?
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@38530 a592a061-630c-0410-9148-cb99ea01b6c8
http://www.mail-archive.com/lyx-
for the reason it needs to be here.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@38497 a592a061-630c-0410-9148-cb99ea01b6c8
If a class has already loaded hyperref (i.e., if \hypersetup is already defined),
immediately issue \hypersetup to prevent a LaTeX error (bug #7459).
This still assures that \hypersetup is called \AtBeginDocument if hyperref is loaded by
a class \AtBeginDocument (such as modernCV, see #7048).
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@38438 a592a061-630c-0410-9148-cb99ea01b6c8
use it to translate the message. (Note that this is presently used only
for XHTML output.)
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@38405 a592a061-630c-0410-9148-cb99ea01b6c8
The one remaining question is whether we should also call resetAnchor()
at the end of setCursor().
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@38388 a592a061-630c-0410-9148-cb99ea01b6c8
documents and graphics were not copied to the export directory, since
the format passed to addExternalFile() was wrong.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@38378 a592a061-630c-0410-9148-cb99ea01b6c8
