- don't assume that the exported file extension is .tex
- use converter tool chain to produce a latex file for input or include
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@38025 a592a061-630c-0410-9148-cb99ea01b6c8
make NOBREAKDASH isLetter()
* Paragraph.cpp (isWord separator):
handle composites with hyphens as one word (i.e., "-" is not a word separator).
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@37946 a592a061-630c-0410-9148-cb99ea01b6c8
under refstyle, since (a) the default refstyle.cfg defines \eqref itself
and (b) does NOT define it the way AMS does. So we simply output:
(\ref{label})
in this case, to match what we say in the UI.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@37918 a592a061-630c-0410-9148-cb99ea01b6c8
Currently, if an inset outputs a newline, the new latex row is still
associated with a previous id/pos. Now, if a latex error occurs before
this newline, we would still highlight everything associated to that
id/pos, even if it is extraneous to the error.
This is avoided by associating the new latex row with the id/pos in
effect right before entering the inset. If an inset does not output
a newline, it is not excluded from the selection, consistent with the
fact that the text of the inset does appear in the error description.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@37903 a592a061-630c-0410-9148-cb99ea01b6c8
This improves the fix in r37328 and allows centered sweave chunks, for example (although this does not work yet for other reasons)
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@37831 a592a061-630c-0410-9148-cb99ea01b6c8
resetFontEdit(). The former is used for on-screen and export formatting,
and the latter is used for interactive editing.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@37761 a592a061-630c-0410-9148-cb99ea01b6c8
- (getLastCellInRow): fix crash when in first multirow row
- (TeXRow): do not output row separator in in last row (bug #7294).
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@37709 a592a061-630c-0410-9148-cb99ea01b6c8
This went in without discussion and is IMHO wrong (bug #7055 is invalid).
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@37676 a592a061-630c-0410-9148-cb99ea01b6c8
latex error occurs inside a table, the exact faulty table row is spotted.
However, if all cells of a table row are output on the same line, lyx is
not able to tell what cell caused the error and highlights the last cell
of the row. This patch allows to output each cell of a table on its own
line, such that the exact point where the error occurred can be highlighted.
Note that this is only done when exporting for preview, and in normal (nice)
exports everything goes as usual.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@37643 a592a061-630c-0410-9148-cb99ea01b6c8
If no initializer is specified for an object, and the object is of (possibly
cv-qualified) non-POD class type (or array thereof), the object shall be
default-initialized; if the object is of const-qualified type, the underlying
class type shall have a user-declared default constructor.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@37603 a592a061-630c-0410-9148-cb99ea01b6c8
counting when exporting to latex. This is done for the code comprised
between \begin{document} and \end{document}, while the preamble code
still needs manual calls to TexRow::newline() for registering new lines.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@37584 a592a061-630c-0410-9148-cb99ea01b6c8
blank lines may be inadvertently output. This is achieved by using two
special iomanip-like variables (breakln and safebreakln) in the lyx::
namespace. When they are inserted in the stream, a newline is output
only if not already at the beginning of a line. The difference between
breakln and safebreakln is that, if needed, the former outputs '\n'
and the latter "%\n".
In future, the new class will also be used for counting the number of
newlines issued. Even if the infractrure for doing that is already in
place, the counting is essentially still done the old way.
There are still places in the code where the functionality of the
class could be used, most probably. ATM, it is used for InsetTabular,
InsetListings, InsetFloat, and InsetText.
The Comment and GreyedOut insets required a special treatment and a
new InsetLayout parameter (Display) has been introduced. The default
for Display is "true", meaning that the corresponding latex
environment is of "display" type, i.e., it stands on its own, whereas
"false" means that the contents appear inline with the text. The
latter is the case for both Comment and GreyedOut insets.
Mostly, the only visible effects on latex exports should be the
disappearing of some redundant % chars and the appearing/disappearing
of null {} latex groups after a comment or lyxgreyedout environments
(they are related to the presence or absence of a space immediately
after those environments), as well as the fact that math environments
are now started on their own lines.
As a last thing, only the latex code between \begin{document} and
\end{document} goes through the new class, the preamble being directly
output through odocstream, as usual.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@37360 a592a061-630c-0410-9148-cb99ea01b6c8
The quick solution is to output a % sign before \n. The better one
would be doing as in mathed, but it is not so straightforward.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@37320 a592a061-630c-0410-9148-cb99ea01b6c8
longtable or not, e.g., in the docbook and xhtml output routines.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@37204 a592a061-630c-0410-9148-cb99ea01b6c8
of things like:
pit.push_back(CursorSlice(*this));
which I've had to change to:
pit.push_back(CursorSlice(const_cast<InsetCaption &>(*this)));
and similarly in a few other places.
If anyone thinks we should instead have:
explicit CursorSlice(Inset const &);
then we can also do that.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@37192 a592a061-630c-0410-9148-cb99ea01b6c8
better than what we had, anyway, since we do not calculate the tocstring
unless we need it.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@37190 a592a061-630c-0410-9148-cb99ea01b6c8
Unfortunately the commandline export of InsetInfo is still broken for MENU_INFO.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@37134 a592a061-630c-0410-9148-cb99ea01b6c8
- use correct params for INDEX_CODE and INDEX_PRINT_CODE (bug 7180).
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@37104 a592a061-630c-0410-9148-cb99ea01b6c8
The problem is/was that when copying an InsetTableCell?, the macrocontext_position_ and the buffer_ were not copied. That's why in InsetTabular?@splitCell@521 and in InsetTabular::TeXRow() and in InsetTabular::metrics we manually copy this into the new object.
However, splitCell() returns the object by-value. So, when we call
InsetTableCell tail = splitCell(head, column_info[c].decimal_point, hassep);
the new object is copied into tail and we lose the buffer_ and macro_contextposition. Later we will crash.
What does *nix in this case ? Apparently they don't make buffer and/or macro_contextposition 0.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@37072 a592a061-630c-0410-9148-cb99ea01b6c8
to be treated as part of the document. For example, the footnote numbers
in LyX are wrong prior to this patch.
This will also affect word and character count, but should not affect
anything else. If that seems wrong, we can either (a) explicitly exclude
notes from the word count or else (b) introduce
bool countWordsInInset() const;
and call that, instead.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@36976 a592a061-630c-0410-9148-cb99ea01b6c8
that also makes sure it doesn't do more work than it needs to do, by
limiting the size to 40 characters. Previously, InsetBranch::addToToc()
would have added a string representing the entire contents of the
branch! It's hard to imagine that having to recalculate that sort of
thing doesn't cause some problems with speed, especially in documents
with lots of notes and branches and such.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@36974 a592a061-630c-0410-9148-cb99ea01b6c8
Using updateMacros() entails a performance hit when loading a document
with really a lot of macros. So, revert to the original strategy of
tracking macros at creation time. In order to also account for macros
defined in a child document, the child is now loaded by the include inset
at construction time instead of after the master has finished loading.
This strategy mimics what updateMacros() was accomplishing without
incurring in its drawbacks, such that loading time is practically
unchanged even with a thousand macros.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@36968 a592a061-630c-0410-9148-cb99ea01b6c8
* only one for loop
* uses runparams.par_end
InsetInclude and InsetIext: initialize runparams.par_begin and runparams.par_end
Except for a few additonal empty lines the LateX exports are identical for all help files. The reason for the additional empty lines is the more consistent TeXEnvironment() call.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@36934 a592a061-630c-0410-9148-cb99ea01b6c8
Previously LFUN_INSET_SETTINGS was misused to show the outliner. As a TOC doesn't have settings, it was no longer showed after a refactorization of LFUN_INSET_SETTINGS/LFUN_MOUSE_RELEASE because InsetToc::hasSettings() returns false.
As this is a special case, we should handle this special case in InsetTOC itself.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@36907 a592a061-630c-0410-9148-cb99ea01b6c8
strings in the layout file, but they were not used.
Question: Should we just remove InsetNote::setButtonLabel() now? The
only purpose it is serving is to provide a backup in case no label is
defined.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@36884 a592a061-630c-0410-9148-cb99ea01b6c8
risk, due to our lack of control over the links and the program used to
view them.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@36789 a592a061-630c-0410-9148-cb99ea01b6c8
menus were (intentionally) missing, and it turns out they were needed.
Normally all invocations of INSET_MODIFY should trigger a recordUndo now.
Of course all cases have not been tested, but it should be working.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@36770 a592a061-630c-0410-9148-cb99ea01b6c8
updateBuffer() traversal. The reason is simple: InsetCitation needs
access to the BibTeX info to calculate its label. But we won't have it
until we get to the bibliography.
I don't think there is any way around that.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@36710 a592a061-630c-0410-9148-cb99ea01b6c8
The issue is that RenderGraphics calls updateFrontend() even if within a CutAndPaste stask.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@36699 a592a061-630c-0410-9148-cb99ea01b6c8
to be passing the BiblioInfo structure around this way. (That's an old
holdover.) That lets us get rid of the non-const masterBibInfo() again.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@36697 a592a061-630c-0410-9148-cb99ea01b6c8
bibliography information in updateBuffer(), rather than doing a wholly
separate traversal. We still do a separate traversal in two cases, as a
full updateBuffer() call just isn't needed there.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@36696 a592a061-630c-0410-9148-cb99ea01b6c8
Strangely enough, the code to go after the inset is here explicitely (so somebody thought at some time that it was a good idea. However, it is not active in 1.6.x...
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@36595 a592a061-630c-0410-9148-cb99ea01b6c8
THis is a consequence of the new AtPoint mechanism. In the old
world, recordUndoInset was called before INSET_MODIFY. I reintroduced
manual recordUndoInset calls in all places that matter. I suspect
that this issue should be revisited later.
Note that recordUndoInset can now take an optional parameter that tells
what inset is concerned. This is useful because the cursor can be
either just inside the inset or in front of it.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@36580 a592a061-630c-0410-9148-cb99ea01b6c8
- if a master is compiled with XeteX or LuaTeX, all children must have plain utf8 encoding
(bug #6774).
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@36554 a592a061-630c-0410-9148-cb99ea01b6c8
fail e.g., of URLs in math, since tocString() is called by
Paragraph::asString() to give us the contents of insets. Probably, I was
misled by the name, and the comment in Inset.h. That means, at least,
that this method is misnamed, but it probably means we do the wrong
thing in other cases.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@36517 a592a061-630c-0410-9148-cb99ea01b6c8
This introduces an isFullUnicode() function to OutputParams that currently only contains XETEX, but later can also contain other fully unicode-aware backends (LUATEX for instance).
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@36445 a592a061-630c-0410-9148-cb99ea01b6c8
- if column of multirow has no width, the alignment is that of the column
- otherwise multirows are fix left-aligned
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@36403 a592a061-630c-0410-9148-cb99ea01b6c8
(the onlycolumn flag is not necessary in setAlignment (but in getAlignment) because it is in every case the same as !IsMultiColumn)
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@36402 a592a061-630c-0410-9148-cb99ea01b6c8
we first do a range test, then check the status. I think this is right
in both cases.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@36351 a592a061-630c-0410-9148-cb99ea01b6c8
here, but not very noticeable, I think, as these ones aren't called by
the addToToc stuff.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@36347 a592a061-630c-0410-9148-cb99ea01b6c8
plaintext() on the entire inset, even though the tooltip is only going
to show the first few lines. This could make things slow when you had a
lot of branches, because this is called by InsetBranch::addToToc().
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@36345 a592a061-630c-0410-9148-cb99ea01b6c8
Also, change from using the "cha" prefix for chapters, a la prettyref,
to the "chap" prefix, a la refstyle. We alias \pr@chap to \pr@cha for
prettyref users.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@36238 a592a061-630c-0410-9148-cb99ea01b6c8
This is why it was worth doing the updateBuffer() rewrite.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@35975 a592a061-630c-0410-9148-cb99ea01b6c8
- only set/unset a caption if necessary.
This fixes the setting of multicols via dialog (part of bug 6985)
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@35929 a592a061-630c-0410-9148-cb99ea01b6c8
- Functions that inherit from the same baseclass are grouped together with a command;
- Functions that inherit should not have a doxy entry;
- Other functions are also grouped together as much as possible;
- Some function don't need to be implemented if they return the same as the baseclass;
- and more.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@35873 a592a061-630c-0410-9148-cb99ea01b6c8
A dynamic_cast is necessary when:
- the object to be casted is from an external library because we can't add Qxxx::asXxxx() to Qt e.g.:
* QAbstractListModel to GuiIdListModel,
* QValidator to PathValidator,
* QWidget to TabWorkArea,
* QWidget to GuiWorkArea;
- the object is to be casted from an interface to the implementing class, because the Interface does not know by whom it is implemented:
* ProgressInterface to GuiProgress,
* Application to GuiApplication.
A dynamic_cast can be replaced by:
- already existing as***Inset() functions, e.g.:
* asHullInset(),
* asInsetMath()->asMacro(),
* asInsetText();
- a static_cast when we are sure this can't go wrong, e.g.:
* we are sure that CellData::inset->clone() is an InsetTableCell,
* in cases where we explicitly check it->lyxCode().
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@35855 a592a061-630c-0410-9148-cb99ea01b6c8
This also fixes compilation again. I forgot to cherry-pick all commits in git ;)...
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@35845 a592a061-630c-0410-9148-cb99ea01b6c8
for formatted references. Fixes#2295, in so far as it makes it possible
to translate formatted references.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@35623 a592a061-630c-0410-9148-cb99ea01b6c8
to the simple version. We need to do it this way because we should NOT
really require the "Flex" prefix and, in fact, should permit other
prefixes to be used. Next commit for that.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@35613 a592a061-630c-0410-9148-cb99ea01b6c8
- do not popup invalid path warning with View Source (bug 6904).
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@35449 a592a061-630c-0410-9148-cb99ea01b6c8
- honor Abdel as author
- reintroduce the /// spacers in the header file because it makes it better readable and we do this in all other inset header files
GuiLine: honor Abdel as author
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@35417 a592a061-630c-0410-9148-cb99ea01b6c8
text baseline, not from the middle of the line.
We are now getting much closer to LateX drawing...
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@35413 a592a061-630c-0410-9148-cb99ea01b6c8
It would be better to get the paragraph language here. How to do that?
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@35386 a592a061-630c-0410-9148-cb99ea01b6c8
selection and chage tracking state
InsetTabular::drawCellLines: use the above function to draw properly tabular lines after a selection.
This method can be used easily for other insets.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@35268 a592a061-630c-0410-9148-cb99ea01b6c8
* stdcontext.inc:
- basic context menu and tooltip (part of bug #6864)
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@35229 a592a061-630c-0410-9148-cb99ea01b6c8
-> remove caption frame color from preferences
-> use the collapsible frame color also for caption frames
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@35187 a592a061-630c-0410-9148-cb99ea01b6c8
- this line is defined with a width of 1pt -> therefore also draw it in this size in lyx
- this line is by default black -> use black
- setting a color for this in the preferences is wrong and senseless, because the color of this line is defined by the color chosen in the text style dialog -> remove preference color
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@35185 a592a061-630c-0410-9148-cb99ea01b6c8
throw away its return value and then go find a pointer to the loaded
child!!
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@35116 a592a061-630c-0410-9148-cb99ea01b6c8
it->fillWithBibKeys(d->bibinfo_, it);
This could be useful later, if we decide to try to do the work that
fillWithBibKeys did from updateLabels().
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@35106 a592a061-630c-0410-9148-cb99ea01b6c8
The goal is first to remove explicit testing against ERT_CODE,
and second to allow to define layouts with the same properties as ERT insets.
This commit does not change behaviour
* rename OutputParams::verbatim to pass_thru
* disable encoding switch inside pass_thru layouts
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@35091 a592a061-630c-0410-9148-cb99ea01b6c8
- InsetCaption.cpp: margin notes and footnotes are not allowed in captions
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@35073 a592a061-630c-0410-9148-cb99ea01b6c8
I'll try to figure out how to get rid of the magic booleans.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@35022 a592a061-630c-0410-9148-cb99ea01b6c8
allow this as a fallback. E.g., if we're unable to export as MathML,
then we try to export as an image.
There are several ways, I am sure, in which this implementation is not
ideal.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@34993 a592a061-630c-0410-9148-cb99ea01b6c8
DispatchResult to store a flag that tells us whether we need a buffer
update or not.
So: If you find a missing one, go to an appropriate place in the
dispatch and call cur.forceBufferUpdate() or, if you don't have a cursor
but do have a DispatchResult, call dr.forceBufferUpdate().
There is one remaining call I could not move, in
TextMetrics::redoParagraph. But this looks like an emergency call when
the macro context has not been set. There are also a couple calls that
are connected with buffer creation that I commented out, since the same
call is done again almost immediately. But I'm not positive about those.
Now the nice thing would be to do the same for updateMacros().
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@34826 a592a061-630c-0410-9148-cb99ea01b6c8
- do not switch the encoding with XeTeX (bug #6766)
- some minor formatting
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@34649 a592a061-630c-0410-9148-cb99ea01b6c8
In r33495, "LFUN_TABULAR_FEATURE" was replaced by "LFUN_INSET_MODIFY tabular". However, the status of LFUN_INSET_MODIFY is always enabled while a lot of insets are not allowed to change the number of columns etc.
There we need to disable the "LFUN_INSET_MODIFY tabular" status.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@34613 a592a061-630c-0410-9148-cb99ea01b6c8
the OptionalArgs tag does and is implemented by the now misnamed
InsetOptArgs, except that its content gets wrapped in "{}" rather than
"[]". Required arguments do not actually have to be provided, but they
are always output.
This will allow e.g. beamer's Block environment to be implemented
without ERT.
Documentation to follow.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@34591 a592a061-630c-0410-9148-cb99ea01b6c8
Do not clear the mouse_hover state from anywhere else then BufferView, such that the last_inset_ pointer gets nulled. Besides, there is no reason to clear the mouse_hover state on collapsing the Inset.
See also r33908, r34117, r34348, r34353, r34354 and bug #3900.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@34364 a592a061-630c-0410-9148-cb99ea01b6c8
- we have to have a copy constructor in InsetCommand to clear the mouse_hover_ map and not to copy it,
- there is no need to have mouse_hover_() in the initialisation list,
- there is no need to copy the auto_open_ map.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@34353 a592a061-630c-0410-9148-cb99ea01b6c8
This is also in preparation of a decent fix for bug #3900.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@34347 a592a061-630c-0410-9148-cb99ea01b6c8
Inside math toolbars we use "Quadratin". Dunno if this difference is intention.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@34336 a592a061-630c-0410-9148-cb99ea01b6c8
At some point we should implement that the tooltips are only shown when they are not completely shown in the outliner. However, this requires extending the QTreeView class.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@34287 a592a061-630c-0410-9148-cb99ea01b6c8
InsetInfo only returned whether a layout file was available for a class, not whether the LaTeX document class was available.
This might be caused by the maybe misleading name of the "LayoutFileList::haveClass()" function.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@34268 a592a061-630c-0410-9148-cb99ea01b6c8
Solution: don't use boost::shared_ptr for msvc10 (could also be extended to several GCC versions)
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@34259 a592a061-630c-0410-9148-cb99ea01b6c8
Solution: don't use boost::bind for msvc10 (could also be extended to several GCC versions)
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@34257 a592a061-630c-0410-9148-cb99ea01b6c8
This introduces a new LFUN LFUN_INSET_COPY_AS, which copies a certain Inset to the clipboard. For InsetInfo this is the text that is visible, but this could also replace LFUN_LABEL_COPY_AS_REF, by copying the INSET to the clipboard as a reference, and also a Math inset to copy to the clipboard as latex (including $'s or \[..\]).
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@34223 a592a061-630c-0410-9148-cb99ea01b6c8
allows for layout- or module-level customization of the display in the
citation dialog and of the XHTML bibliography output.
There is more of this to come, by the way. The next step is to allow
macros. That will make it easier to deal with translation issues, which
ought to be the final step.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@33920 a592a061-630c-0410-9148-cb99ea01b6c8
indicates what prefix to use when constructing formatted references.
Documentation to follow.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@33784 a592a061-630c-0410-9148-cb99ea01b6c8
- reintroduce issue that was removed in r33731
(multirow cells are by default left-aligned, LyX does not yet support to change this)
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@33782 a592a061-630c-0410-9148-cb99ea01b6c8
little things:
- rename method to what it is
- correct parameter
- bit of formatting
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@33774 a592a061-630c-0410-9148-cb99ea01b6c8
Do not warn that a label already exists if it is in a deleted part of the document.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@33714 a592a061-630c-0410-9148-cb99ea01b6c8
The asymmetry between how "Branch" is read and written still needs to be
addressed, as does the fact that InsetBranchParams ought to be created
with a param string.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@33706 a592a061-630c-0410-9148-cb99ea01b6c8
This patch introduces a "ListCommand" tag for Float layout. This tag
defines the command used to generate a list of such floats, in the cases
where float.sty is not used (i.e., where NeedsFloatPkg is true). We were
previously hardcoding the commands \listoftables and \listoffigures. But
in other cases, such as achemso.layout, which defines lists of schemes,
charts, etc, we could not output such lists.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@33633 a592a061-630c-0410-9148-cb99ea01b6c8
of them. This is preparatory for introducing a layout tag that lets us
customize that command for builtin floats.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@33631 a592a061-630c-0410-9148-cb99ea01b6c8
list revealed that the former is confusing to people. The latter
indicates more clearly what the tag does.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@33626 a592a061-630c-0410-9148-cb99ea01b6c8
- multirow cells are always left aligned, therefore disable horizontal alignment
- multirows cannot be vertically aligned, therefore disallow this
(Two issues less in http://wiki.lyx.org/Devel/Multirow .)
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@33622 a592a061-630c-0410-9148-cb99ea01b6c8
- a multirow cannot be a multicolumn the same time
- a multirow cannot be the caption of a longtable
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@33614 a592a061-630c-0410-9148-cb99ea01b6c8
