As of LaTeX2e 2018, characters are made active earlier, which results
in new expansion problems.
Following a suggestion of Markus Kohm (pc) and the TL mailing list [1],
we embrace non-ASCII input paths in \detokenize. This relies on e-tex,
but I think we can assume this is nowadays available everywhere.
[1] http://tug.org/pipermail/tex-live/2018-May/041691.htmlFixes: #11146
The code in 90cfe4ec3 only handled the cells which metrics are
computed directly, and missed those who were linearized inside a MathRow.
To fix this, we use the fact that all the positions in a math row have
the same height and make MathRow::metrics return a boolean indicating
whether it contains a caret for a given bufferview.
Fixes bug #11153.
Rather than checking for hardcoded title commands such as \maketitle,
use the titlename and titletype as defined in the layout.
This now also includes title environments.
Fixes part of #6461
This is an extra command used for sidenote citations. Since we do not
provide \cite with natbib (which tufte uses) as a choice, we use the
new AddToCiteEngine feature to add it.
File format change.
Fixes: #11150
Now layout files and modules can extend the cite engines or completely
overwrite them, and modify the cite formats.
Any CiteEngine definition in a layout/module will completely overwrite
those by cite engine files.
AddToCiteEngine will extend them (add if they do not exist yet).
Any CiteFormat definition in a layout will be preferred to those in cite
engines. CiteFormat definitions that are not touched by the former are
still active, though (so, as opposed to CiteEngine, a CiteFormat does
not completely overwrite those by the engine files).
Layout format change.
As opposed to modules (from which the framework was initially borrowed),
we only allow one cite engine per document. Thus, we don't need to fiddle
with lists.
This is like `layout', except that the layout is reset to default if
it was already correct. In the case of a selection, the layout is set
normally if some layouts in the selection are not at the required
layout; it is reset only if all the layouts of the selection already
have the required layout.
Part of ticket #9864.
Factor out some code in helper functions. Improve getStatus so that
icon is selected only when the whole selection has the correct layout.
This work towards ticket #9864.
It is now possible in the float settings (doc dialog) to specify a global
(inner) alignment for floats, and in the float settings, this can be
overridden (just as with float placement)
Fixes: #8665
File format change.
In the context menu for a selection, we now only show the options
"Accept Change" and "Reject Change" if there is actually a change in
the selection. Similarly, in the toolbar, the buttons are only
enabled when there is a change in the selection.
This fixes#10338.
Currently if we have a 2.3 file and we open it with a more recent version
we get:
original file: file.lyx
backup file: file-lyxformat-544.lyx~
After this commit the backup file becomes
file-lyx23.lyx~
If the file is from a development version then we get the same result as before.
This revives a ten year old idea (and patch) by Dov.
You can now mark in the character dialog text and exclude it from spell
checking.
Fixes: #1042
File format change
Remaining issue: The instant spell checking marks are not immediately
removed, but only after some editing.
This is a proposal, but I think you should try it out in order to comment
What this does, is:
1. Remove the toggle madness. This is really not something anyone
understands without knowing the code, and its very unusual UI
(fixes#4836)
2. Separate and group things that were put all into the "Misc" trashcan
combo
3. Let the dialog reflect the font settings at cursor (selection)
Now the dialog looks more like character dialogs from other applications,
and I think it is more in line with what users expect.
Comments very welcome (and of course I will revert if you want to have
the old idiosyncratic thing back).
We \cprotect them in fragile context. This allows \input, \include as
well as \verbatiminput and \lstinputlisting in sections etc.
They still don't work in titling (#2528)
I'm open to putting this elsewhere on the toolbar, or even on a
different toolbar. Also, we need decent icons. These ones are not
intended seriously but were just borrowed for testing purposes.
Anyone have good ideas about icons?
This commit fixes an issue where the menu option "Insert Separated
Frame Below" would show up twice, with one instance disabled. This
occurred when there was a "Standard" environment nested in a
"Frame". With this commit, the duplicate instance is removed.
A feature can now be required only for specific input or font encodings:
- <feature>=enc1;enc2... Require the feature <feature> only if the
character is used in one if the specified font
or input encodings.
- <feature>!=enc1;enc2... Require the feature <feature> only if the
character is used in a font or input encoding
that is not among the specified.
Instead of "Save" (permanently) and "Apply" (temporarily), OK and Apply
now always save permanently, unless the new checkbox "Apply to current
session only" is checked.
Addresses: #10016
Compute a height from current font and current cell vertical
dimensions in MathData::metrics(), because this is where current font
is known.
Introduce BufferView::setCaretAscentDescent to remember this value.
This mechanism is not used for text because Cursor::current_font is
restored by undo, and the caret height would not be changed then. But
in principle it is doable.
The new code is much simpler: what it does is, after redrawing has
been done, to mark the cursor row as changed, so that it will be
repainted on next paint event.
This avoids some crashes at the price of possibly repainting the row
when it was not necessary.
The problem is that popping dialogs during reload can cause paint
events for which we are not ready. If this does not work, then we
can introduce a new flag, besides 'busy', for that case. But busy
does not seem to be used very widely, so hopefully this works.
This has the effect that inserting nomenclature entries does not
cut the selection (implicit or explicit) but rather copies it, which
seems to me to make a lot more sense. If anyone objects, let me know.
When the cursor is inside a subscript that may become empty, metrics
issues can happen. This patch fixes the issue, although it is not
clear to see what the problem is.
Still, requesting a metrics update also in the case where the macro
mode is canceled makes sense.
Fixes bug #11125.
Following a request by Günter, we consider the document fonts (only rm
for now) when selecting an appropriate font encoding.
See #9741
The new default font encoding setting "auto" does
* consider the font encoding needed by the language(s), which can now
have fallback alternatives
* Consider which font encoding is provided by the document font
Thus, cm now will result in OT1 fontenc, if the language can deal with
that.
The font_enc pref is ditched: it is no longer needed.
The automatism is still very basic and is subject to extension.
File format and prefs format change.
Before, the command
buffer-forall buffer-export
only exported one buffer for me. With async disabled, the command
works as documented and successfully exports all buffers.
Also before, I received an assertion from
buffer-forall buffer-close
which caused a SIGSEGV at #9422. Now, the action works as expected.
It surprises me a bit that the code is different in this case
from the case when EXPORT_in_THREAD is not set. I should check
to see if there's a problem in the other case, too.
Use the command as defined by Babel. This allows us to use the (more
advanced) Babel command if provided instead of rolling our own.
I add a dummy file format change in case it turns out we need to
do something here for old documents (e.g. with user preamble definitions)
The idea here is to force commands to be run syncrhonously when
they are launched via "command-sequence" or "repeat". We do this
by using a new flag in FuncRequest.
When computing a cell metrics, it is now possible to specify whether it
is tight (at least as tall as 'x') or not (as tall as the max height of
the font).
Use this to make sure that grid insets have large enough cells. It
will probably appear that other cells needn't be tight. Currently, the
only cell which is known to be tight is the nucleus of the root inset.
Others should be examined one by one. It might be that the default of
MathData::metrics tight parameter should be `false'.
Fixes bug #11050.
This change also applies to Comment insets. For example, Greyedout
and comment insets can now be inserted in section titles.
The usage of these insets in commands relies on the newly
implemented cprotect feature. The usage of these insets in
description items already worked fine (without cprotect).
This commit also enables modification of these insets (e.g.,
converting a LyX note to a Greyedout note) in commands.
This commit is related to #6969.
The problem was that, if we killed export when some graphic was
being converted, or some external template was being handled, it
would only cancel that process, and then it would just continue.
To deal with that, we need to do a few things:
1. Modify the return values for some of the Converters routines,
and similarly the routines for external templates, so we can
tell when something has been canceled.
2. Throw an exception from InsetGraphics or InsetExternal when this
has happened during export, but ONLY when the Buffer is a clone.
We shouldn't be able to 'cancel' export when we're, say, generating
code for the preview pane, but this keeps us on the safe side..
The exception then has to be caught, obviously, back in the export
routines in Buffer.
Probably Coverity will be unhappy about something here, but I'll
deal with that problem as it arises.
This commit follows 8d2b121e and is not expected to change
functionality (e.g., I confirmed that the cases of #7330 and #11106
are still fixed). The advantages of this refactoring are the
following:
- Remove some preprocessor directives:
processingThreadFinished() is only called in the case that
EXPORT_in_THREAD is 1, so by moving some code up in the call list,
the directives are not needed.
- If errors() is called when there is no error, there will not be unexpected
behavior (e.g., as was the case before 8d2b121e).
Note that errors() is still only called by the code touched by this commit
if there is an error, but that is for efficiency and readability.
- The "from_master" argument now has a constant meaning. Before, it
could be the case that "from_master" was set to false but that the
master's error dialog was shown.
This allows (some) verbatim contents in macros, such as \url's with
specific chars (#, % etc.) in section headings or footnotes (#449)
or comments in captions (#9313).
The mentioned two bugs are fixed by this commit.
Note that the implementation is still rather basic and might need
extension for other cases.
This is mandatory for some features (such as bookmarks,pdfusetitle)
to work, and only a handful of drivers can be auto-detected by hyperref.
Fixes: #6418
If a master document is compiled and has errors, and then a child is
compiled without error, the errors from the master compilation were
shown.
The setup of the relevant code is the following:
processingThreadFinished() calls errors(). errors() makes the
assumption that if it is called, there must have been an error
somewhere.
The logic of the setup is the following:
processingThreadFinished() knows whether there was an error on
the most recent preview/export, although it doesn't know whether
the error is from master or child (i.e. does not know whether the
user was compiling the child, or whether master-buffer-view was
called). Inside error(), if there is no error in the child, it is
assumed the error is from master.
For the above logic to work, errors() should only be called if there
was an error.
This commit fixes#11106 and preserves the fix to #7330.
The original use case for this bug is entering an overset inset when
there is a selection. The expected result was to have the selection
pasted in main text, but the result was to have it in the cell.
Insets already have idxFirst() that is able to set cursor to the
"entry" cell of an inset. This patch introduces firstIdx(), which is
the index of this cell and uses it in idxFirst() (idem for
lastIdx/idxLast).
As a consequence, several instances of idxFirst/idxLast can be removed.
Now for the real fix: the two places where the cell in which selection
is inserted seem to be:
* Cursor::macroModeClose
* Cursor::handleNest
These two methods are changed to insert material in the entry cell
instead of cell 0.
idxFirst/Last methods are added to InsetMathRoot and InsetMathStackrel
so that the natural entry point is the nucleus of those insets.
Finallly, a typo is fixed in InsetMathNest::edit() where enter_front
computation was incorrect.
* Implement list item overlay support (\item<arg>)
* Implement itemcommand support (e.g., \overprint<arg>)
* Fix general list argument placement
Part of: #11068
Implemented: Overlay and standard overlay arguments for commands
and environments.
Still missing:
* List item overlay
* itemcommand overlay (\overprint)
* overlay via LatexParam (e.g., Flex:ArticleMode)
Needs fixing:
* General list argument (\begin{itemize}[arg])
* nested content in a frame with no title (empty par)
There are more independent crashes occuring in this scenario and this
fix targets only one of them, in particular the one in which different
window's outliner sends outliner command to a wrong window. The fix
itself gives an option for lfun to know which window it belongs to.
https://www.mail-archive.com/lyx-devel@lists.lyx.org/msg203619.html
We now report whether the attempt to recode the macros to glyphs
succeeded. If yes, we set "literate" to false, if not to true.
Also, do not attempt to recode for non-latexifying fields.
Fixes: #9563
