If we are testing tex2lyx the first time, then the userdir
is empty. We call now configure.py to initalize in case it is needed.
The algorithm to detect if reconfigure is needed mimics the lyx behaviour.
The option --enable-qt5 allows configuring for Qt5. The default is Qt4.
Nothing special is done with respect to Qt4, apart from pulling in the
correct libraries. Indeed, other than the core and gui libraries, now
also the concurrent and widgets libraries are needed.
This is a follow-up of bug #8967. The implementation is self-explaining, the
only part which needs a comment is lyx2lyx: Since a 100% correct solution is
not possible, it has been decided not to switch amsmath off in the forward
conversion if no other ams command than \smash[t] and \smash[b] is used, but
to consider it a bug that older versions do not load amsmath automatically for
these commands. In the backward direction it is easy to keep the document
compilable, so just do that.
The algorithm used for breaking a paragraph in LaTeX export is changed
for avoiding spurious blank lines causing too much vertical space.
This change is tied to the introduction of a new inset (with two
different specializations) helping in either outputing LaTeX paragraph
breaks or separating environments in LyX. Both of the above goals were
previously achieved by the ---Separator--- layout and can now be
accomplished by the new inset in a more natural way. As an example,
after leaving an environment by hitting the Return key for two times,
a third return automatically inserts a parbreak inset, which is
equivalent to the old separator layout, i.e., it also introduces a
blank line in the output. If this blank line is not wanted, the
parbreak separator can be changed to a plain separator by a right
click of the mouse. Of course, an environment can still be separated
by the following one by using the Alt+P+Return shortcut (or the
corresponding menu key), but now the plain separator inset is used
instead of the old separator layout, such that no blank line occurs in
the LaTeX output.
Old documents are converted such that the LaTeX output remains unchanged.
As a result of this conversion, the old separator layout is replaced by
the new parbreak inset, which may also appear in places where the old
algorithm was introducing blank lines while the new one is not.
Note that not all blank lines were actually affecting the LaTeX output,
because a blank line is simply ignored by the TeX engine when it occurs
in the so called "vertical mode" (e.g., after an alignment environment).
The old ---Separator--- layout is now gone and old layout files using it
are also automatically converted.
Round trip conversions between old and new format should leave a document
unchanged. This means that the new behavior about paragraph breaking is
not "carried back" to the old format. Indeed, this would need introducing
special LaTeX commands in ERT that would accumulate in roundtrip
conversions, horribly cluttering the document. So, when converting a
modified document to old formats, the LaTeX output may slightly differ in
vertical spacing if the document is processed by an old version of LyX.
In other words, forward compatibility is guaranteed, but not backwards.
In C++98 std::istream does not use an operator bool(), but an operator
void*() instead, which prevents some unwanted conversions (this is one
possible implementation of the safe bool idiom).
In C++11 std::istream uses explicit operator bool, which prevents the unwanted
conversions using a new language feature.
This change does not have any effect on correct code, but prevents some
mistakes.
* remove unused class TexStream.
* remove unused virtual method Inset::cellXOffset
* remove second argument of FileDialog constructor, which was actually
not used
* remove some dead local code
* remove some unused private members of classes
* in InsetMathNest::updateBuffer, fix the logic of a test
This patch improves the cmake bundling process:
- reworked bundle handling for OS X: only when installing resources are copied, otherwise
only the smallest bundle is built
- on OS X, the utility programs (tex2lyx) are now installed in the right location
- it removes some unneeded BUNDLE DESTINATION
- it provides a basic support for QT plugins inclusion
- it properly builds a disk image on OS X (only the background image is missing)
- it fixes the library paths for all executables (not only LyX)
- Use the COPYING file for cmake install license
writer2latex surrounds quotes by braces which we skip to avoid useless ERT.
I broke this in 25fe87e5 which made Parser::next_next_token() not recognize
that it needed to parse one more token. If we had a unit test for the Parser
class it would probably have detected that. Now we have at least a test for
the special quote.
If we call tex2lyx on a temporary file created from the clipboard, the
file is always in utf8 encoding, without any temporary changes, even if it
contains encoding changing LaTeX commands. Therefore, we must tell tex2lyx
to use a fixed utf8 encoding for the whole file, and this is done using the
new latexclipboard format. Previously, tex2lyx thought the encoding was
latin1.
As a side effect, the -e option is now also documented in the man page.
The tests are now more robust if ctest uses '-j' (number of threads) parameter.
a.) keytests are running in sequence and in one thread only, no other thread running
b.) tex2lyx tests are locking in respect to each other
c.) Test gets one or more labels, so that we can select
ctest -L url
to run tests labeled url
d.) New macro settestlabel() to add labels to a test
When comparing the contents of two lyx-files, we should not care about the specific version. Later, this can be extended to also not care whether the file is produced by tex2lyx, lyx2lyx, or LyX.
Modified-By: Vincent van Ravesteijn <vfr@lyx.org>
LyX, lyx2lyx and tex2lyx produce now all the same version indicator consisting
only of the major and minor version. It is not decided yet whether future
development versions will add a -dev suffix, but for 2.1.0 this change fixes
the inconsistencies.
Unfortunately automake does not support file names with spaces for files in
EXTRA_DIST: These file names are put into a shell list, and it is impossible
quote the name in a way that works both with the shell and with make.
Therefore I removed the corresponding test file.
In roundtrip mode, tex2lyx produces documents with extension lyx.lyx, so that
the original files are not overwritten on re-export. This was not done for
included documents which were converted, and this broke 'make dist'.
* InsetBox and GuiBox: Use proper empty length instead of the broken -9.99col% trick
* some slight changes to the logic of GuiBox to make sure that values are set as needed.
* lengthToWidget(): handle properly the empty length case. All the other related Qt helpers did it already, it was probably an oversight. Also set the default_unit parameter as optional (not needed in this patch actually, but I got carried away :)
* allow generating LaTeX code for an empty length, since some broken code does that.
The default citation capability of LaTeX is not a true numerical
citation engine, rather it uses a mixture of labels/numbers. Thus
we now distinguish them: "numerical" always increments the bibitem
counter and uses its value as a numerical citation label, while
"default" only uses the bibitem counter when no label is provided.
LyX file format incremented to 471.
These should be used if any new style needs to be introduced in the stable
2.1 series: If the ForceLocal flag of the style is set, it will always be
written to the document header, so that even older 2.1 versions can read
and correctly output the document.
When running the test, you'll get the following messages:
Testing ../../src/../lib/layouts/siamltex.layout...
Layout.cpp (268): Cannot copy unknown style `Enumerate'
Testing ../../src/../lib/layouts/svglobal.layout...
Cannot delete style `Dedication'
Testing ../../src/../lib/layouts/svjog.layout...
Cannot delete style `Dedication'
Testing ../../src/../lib/layouts/svprobth.layout...
Cannot delete style `Dedication'
These are no errors of Layout::write(), but they indicate problems in the
definition of the layout files.
Kornel, it would be nice if you could do the cmake part.
- fileformat change
- it was a pity that LyX did not yet support a simple rectangular frame without a defined width but LyX did this for e.g. oval frames
- \fbox and \mbox often occur in TeX files and can now be imported
* Powerdot now also uses the native overlay item arguments
* a list option argument is finally available
* \pause natively supported (like in beamer)
* support for \onslide (via InsetFlex)
* support for \twocolumn
File format change.
With this commit, old beamer frames are converted to new ones. The old styles are removed (including the infamous \lyxframe).
This should be tested with as much beamer documents as possible (I have already done so), also, tex2lyx now probably produces invalid LyX files.
I added it because of a misunderstanding. If the encoding is really set too
late, to_utf8() in the Token constructor would probably fail, but a non-empty
putback buffer is no problem, since it was always created via to_utf8() ->
from_utf8().
This fixes bug #8554 and some recently introduced busg:
- Encodings::fromLaTeXCommand() can now handle all combining characters,
not only the one letter ones
- The remainder returned from Encodings::fromLaTeXCommand() must never be
thrown away in tex2lyx, but output as ERT
- No special case for combining diacritical marks needed anymore in parse_text()
- No special cases for accents and IPA combining diacritical marks needed
anymore in parse_text()
- special tipa short cuts may only be recognized if the tipa package is loaded
- Use requirements returned by Encodings::fromLaTeXCommand() instead of
hardcoded registering of tipa and tipax
- Get rid of the name2 variable in parse_text(): We must use name, otherwise
the extra stuff that might have been put into name vanishes
tex2lyx skips LyX preamble code only if it thinks that the file was created
by LyX (i.e. special comments are found). I don't like that, but this is
how it works and therefore the special comment neds to be added if the
theorem commands are to be skipped. This header makes also the temporary
setting of in_lyx_preamble obsolete, which caused skipping of user preamble
commands, which were not re-added by LyX.
- Convert prettyref to the autopackage mechanism
- Do not load refstyle automatically if some refstyle preamble code of LyX
is found, since LyX will only load the package if an actual reference
command is used. This is needed for mixed refstyle/prettyref documents.
- Only recognize refstyle commands if refstyle was detected in the preamble
- Only recognize prettyref commands if prettyref was detected in the preamble
- Add a mixed refstyle/prettyref test case
* use verbatimStuff for parsing chunks and make try to follow closely the sweave sytax constraints.
* merge the two cases for parsing << (noweb or quote)
* \verb|ff| requires that its parameter is on a single line.
- support for Cyrillic characters
- support for \textifsymbol and \ascii (fixes bug #8556)
- support for \ding
- tex2lyx/text.cpp: correct an indentation and use "name2" because "name" is already defined in this clause
- for all TIPA characters the tipa and tipx package must always be registered because these characters are also allowed outside a TIPA inset
- include \textvertline because we again reached the maximum number of if statements allowed by MSCV (so safe at least one for now)
The LyX file format only supports one CJK font mapping per document.
Therefore all CJK environments which use a different mapping than the main
one are output in ERT. THis is now explained in the test case, and also the
converion to ERT is improved (although it is still wrong e.g. for paragraphs).
- support for \textdoublevertline, \textvertline, \textglobfall
- support \!o and \!b and \!d and \!g and \!G and \!j
- support and \*k and \*r and \*t and \*w
- register the package "tipa" if \textipa is detected in an equation
- add a \textipa equation to the testfile
(I failed to implement support for the TIPA character "\t*{ }" and the command "\=*".)
- Use the LyX name of encodings instead of the LaTeX names.
The LyX name must be unique, while the name used by LaTeX
not necessarily, e.g. different packages might implement
support for the same encoding.
- Rename koi8 to koi8-r, so that the LyX and LaTeX names match.
- Rename euc-jp-plain to euc-jp-platex, jis-plain to jis-platex
and shift-jis-plain to shift-jis-platex.
- Add utf8-platex encoding (fixes#8408).
LyX file format incremented to 463.
- support for the combining diacritical marks
- support for \texttoptiebar and \textbottomtiebar
- test-insets.lyx: add complete testcase
- TODO.txt: update what still needs to be done
This is achieved by not calling Parse::tokenize_one() anymore in
Parser::good(): The status of the input can be tested without performing the
actual tokenizing. Now there are only two methods that may prevent an encoding
change:next_token() and next_next_token().
This is an addendum to [72a44b3c/lyxgit] because depending on the environment, LyX adds a \phantomsection before \addcontentsline.
- also update the test file
This is an important part of the tests. If updating the test cases is really a
problem there are two better solutions than not testing the format: Convert
the references with lyx2lyx on the fly, or remove the hard coupling of tex2lyx
and LyX versions again. Both increase additional possible error sources, but
these errors could at least be detected. If the test machinery is made blind
for versions, file format errors are impossible to detect.
Jean-Marc discovered a possible data loss caused by Parser::getChar().
This is now fixed, and Parser::getChar() is removed, since it is no longer
needed and easy to use it in the wrong way.
- nothing needs to be done for feyn.sty - it is already recognized as simple feature and the roundtrip using the feynman example file works
- update entry for undertilde to be uniform
When switching catcodes (for example to verbatim), there are in general some tokens that have already been parsed according to the old catcodes. It is therefore needed to "forget" those token and reparse them.
The basic idea is to use idocstream::putback() to feed the characters back to the stream, but this does not work (probably because we disable buffering). Therefore, we implement a simple stream-like class that implements putback().
This is a refactoring commit, which may introduce minor regressions, but should go in the right direction.
* introduce Parser::verbatimEnvironment, which is a wrapper around verbatimStuff
* introduce output_ert, which inserts a string as ERT; this allows to factor out several code instances.
* rename handle_ert to output_ert_inset: this creates an inset and then calls output_ert
* remove handle_comment (use handle_ert instead)
* remove handle_backaspace (unused now)
* use the new methods in handle_listing
TODO:
* use for other verbatim-like cases (Sweave chunk, url...)
* maybe implement Parser::unparse to reparse tokens already parsed with the wrong catcodes (if needed)
- Implement catcode setting in Parser
- add a new Parser::verbatimStuff method that reads verbatim contents
- use this method to parse "verbatim" environment.
- use it to parse \verb too.
- rename Parser::verbatimEnvironment to ertEnvironment.
TODO:
- use for other verbatim-like cases (Sweave chunk, lstlisting...)
- factor out the function that outputs ERT (including line breaks)
- maybe implement Parser::unparse (if needed)
Provide functions for translating to the LyX name
of an encoding from either a LaTeX name or an Iconv
name, with the possibility to specify the package.
This is in anticipation of changing to use the LyX
name of the encoding in the .lyx file format and
allowing multiple lib/encodings entries to have
the same LaTeX name (but different packages!).
The tex2lyx parser needs to worry about the iconv
name of the input encoding, so store that instead
of the latex name.
The old layouts are still there (marked as deprecated). The new ones are more or less correctly reverted (polishment required), but the old ones not yet converted to the new. Once this is done, a further file format change should be made.
These encodings were not defined, since they must not be used as document
encodings (the characters {, } and \ may appear in high bytes, and latex
would be confused). However, they are supported by CJK.sty (which uses a
preprocessor to circumvent the limitations of the latex executable). These
encodings are now defined, but used for import in tex2lyx only.
The test case CJK.tex contained fake tests for shift-jis and big5 (the
japanese and chinese characters were entered using the utf8 encoding), and
therefore the wrong interpretation of these encoding looked as if it worked.
The comments about missing iconv support of shift-jis and big5 were wrong as
well (otherwise shift-jis-plain would not work either).
Actually, the test case showed several problems:
- ERT insets did use layout "Standard", not "Plain Layout"
- The font scale was read correctly, but tex2lyx claimed that it did ignore
the option "scaled=0.95"
- If a third argument of the CJK environment was given, it caused the whole
environment to be put in ERT with a broken encoding. This is now fixed for
the bug test case by using the \font_cjk header variable, but the encoding
problem still exists for unsupported encodings. I'll file a separate bug
for that.
- The CJKutf8 package was not handled in the preamble parsing. Therefore the
chinese comment in the preamble was read with a wrong encoding, and guessing
the document language did not work.
The new file CJKutf8.tex was created by copying and modifying CJK.tex, but
unfortunately it is impossible to tell git to inherit the history of CJK.tex
for the new file (search the web for git svn copy if you want to know details).
Special characters as created by latex_path() where not converted corectly
from LaTeX macros by tex2lyx. Now this is done, even for file names containing
double quotes which are not used for quoting spaces. These file names are not
legal on windows, and will causes probelms in DVI files, but if they occur
tex2lyx does not produce invalid .lyx files.
The fix is basically mechanical, the additional code for fraction like insets
with three arguments was stolen from \unitfrac. As any math package,
stackrel.sty needs a buffer parameter to switch it off.
I also added the two stackrel flavours to the toolbar.
Both problems where caused by the fact that tex2lyx did not handle
natbib/jurabib citations correctly if natbib/jurabib was loaded by the
document class. Therefore it tried to parse the standard \cite syntax, and
did not recognize \citet and \citep.
The \frametitle command is less convenient to use than the \frame argument, but it provides more options (overlay/action and short title). We thus provide this additionally to the option, like beamer itself does.
This has a list-like structure (with \onslide item commands). The previous implementation was rather useless, since it required lots of ERT. Since the new implementation is so different, we use ERT for conersion/reversion.
The lyx2lyx routines are not yet perfect, though.
The stmaryrd package adds support for lots of math symbols, using a font
designed to accompany the computer modern fonts. The changes in detail:
- Fix generate_symbols_list.py to work with stmaryrd.sty. It loooks like it
was automatically translated from a perl version and never used.
- Generate the new symbols in lib/symbols using generate_symbols_list.py and
add some manual adjustments
- Generate stmary10.ttf by a simple ttf export from stmary10.sfd with fontforge
- Add license info for stmary10.ttf
- Create a test file with all symbols from stmaryrd.sty. Actually it would be
nice to have this for the other fonts as well.
- The mechanics: lyx2lyx, tex2lyx, font machinery etc.
This patch puts all projects into subfolders (at least for MSVS). In this
way, there is a better overview (especially if the number of test projects
will be increasing).
Now that we have module support for literate programming, it is possible to do a noweb cleanup. This is basically a patch from Kayvan Sylvan:
- get rid of literate-xxx classes
- rename Scrap to Chunk, since this is the name noweb doc uses (Scrap is from nuweb)
- update lyx file format and add lyx2lyx support for gettting rid of literate-xxx classes
- update documentation
On the top of it, update tex2lyx to
- avoid creating files with literate-xxx class
- fix conflict between parsing << as a quote and parsing it as a Chunk
- create Chunk layouts instead of Scrap ones.
Actually tex2lyx can handle modules since some time (#5702), but not
theorems (#5776). Now the following issues are fixed:
- Modules that depend on other modules can be loaded, since the dependencies
are loaded first
- Default moduls of the text class are loaded correctly
- \newtheorem is recognized as a command that defines new environments and
treated similar to \newenvironment
With this new command line switch a list of modules can be loaded
unconditionally. This seems to be needed for the literate programming formats,
and it is useful to work around bug #5702 as well.
The listings inset does automatically load the color package if any parameter
contains \color. As mentioned in bug #8066 tex2lyx needs to be aware of this,
so the \usepckage{color} is automatically skipped in these cases.
Creating LYX_DATE dynamically at configure-time caused unwanted recompilation
of the whole directories (src + src/tex2lyx) because all the relevant objects
were dependent of a common file (flags.make in case of "Unix makefiles") which changed
accordingly.
There is now a new include (lyx_date.h, with only one definition)
Nothing changes for automake, since in this case LYX_DATE is defined in config.h
s is a valid horizontal position for framebox (as well as for makebox, which
was already parsed correctly). There was even a test case, but with a wrong
reference.
Instead of annoying the user with an automatically created note in the output
document which she needs to delete manually, determine the document language
automatically for documents that use CJK. This is done using a heuristic which
roughly counts the number of characters in each language and sets the one that
is used most often. This is not perfect, but it works for the two major use
cases: A document with only some CJK parts (in this case the babel language is
used), and a document which is mainly written in one CJK language. It is only
a minor problem if the heuristic is wrong, since the TeX export is still
correct, and there is no spell checking support for CJK anyway.
Now all regression tests do pass except for some relative path issues
depending on the location of the build directory.
The previous output was read correctly by LyX as well, but the new version is
more similar to the files written by LyX. Also update TODO with recent file
format changes.
Commit 7cfac95 got rid of empty lines that were created by removing \usepackage
statements. However, it added an additional newline in case the \usepackage
was not at the end of the line. This is now fixed.
The old fix was incomplete (\verb~\~ was translated to \verb~~ in roundtrip).
The real cause for this bug (and also the mistranslation of \href{...}{\}})
was the misbehaviour of Token::character() (see comment in Parser.h): This
method even returns a character if the category is catEscape, and this is not
wanted in most (all?) cases.
If this option is given, included files will be copied to the output directory.
Also -roundtrip is now allowed with given output file.
-copyfiles is useful if you want to ensure that no file (not even an included
one) is overwritten by a subsequent export from LyX. Both changes are needed
for unit tests that do not write to the source directory.
The input and output file names of tex2lyx may be relative. In this case,
getMasterFilePath() and getParentFilePath() return relative paths as well.
Now the file name translation logic for all kinds of included files can
cope with that.
If there was an encoding set by the inputenc package, it must not be ignored.
Now all tex2lyx test cases can be exported to .tex again by LyX (although
there are still some differences in the .lyx output).
It is invoked by 'make check' (automake only, it would be nice if someone
could add it to cmake as well), or by calling
python src/tex2lyx/test/runtests.py <path to tex2lyx binary>
by hand. Currently, it does not compare the output (this comes later).
The added .lyx files are from tex2lyx around mid of april, so that you
can see the regressions of the current version if you run the test
yourself (simply run git diff afterwards).
The home made test runner is quite stupid, but better than nothing.
Feel free to improve it or replace it with something better, as long
as running it stays as simple as now.
- tex2lyx/text.cpp:
- fix bug that swallowed valid braces
- the encoding is "Bg5" not "BIG5"
- add and update comments
- CJK.tex: add an example for the Bg5 encoding
- Preamble.cpp/:
- move list definition out of anon namespace
- declare lists and a function in the class
- text.cpp: remove the now already defined list
- Parser.cpp: \verb can have any character as delimiter (except of ASCII letters) not only '+', therefore partly revert [3943b887/lyxgit] and fix it for all cases
Preamble.cpp:
- support the font scaling
- improve coding style
text.cpp: - improve logic/coding style
XeTeX-polyglossia.tex:
- add scaling
- change document so that it is compilable using the Libertine font
Instead of adding the extra '\n' to tex2lyx, we should remove it from
BufferParams.cpp because it was introduced there unintendedly in d7eaaba9
(Juergen Spitzmueller; "support for CJK font argument"; Jun 5 2008).
This partly reverts commit c2810f922665c591a7c32d4c679e58e55132505a.
Fix commit [aa9fed93/lyxgit]: it is never a good idea to call substr(4) on a string without checking its length. Moreover, it is even better in this case to check that the first letters are "text" as the reminder of the code assumes...
- tex2lyx/Preamble.cpp/h: not all new header definitions since fileformat 413 have yet been added to texl2yx, so do it now; also change some new default values
- bugfix for the parsing of polyglossia's paragraph environments
- new support for polyglossia's language change commands \textxxx
- XeTeX-polyglossia.tex: add more testcases and add a missing \end
objects. The problem that led to the leak is that these objects can be held in
memory long after the Buffer that created them is gone, mostly due to their
use in the CutStack. So they were previously held in a storage facility, the
DocumentClassBundle. Unfortunately, they were now being created too often,
especially by cloning. It's not really a leak, because they're accessible, but
we weren't ever destroying them.
This new approach uses a shared_ptr instead.
Thanks to Vincent for pointing out const_pointer_cast.
While cppcheck did not turn out any suspicious error messages, using
the "performance" flag highlighted several nitpicks in three categories
* do not use it++ for iterators, ++it is better
* do not use size() to test for emptyness, empty() is here
* do not use "const T" as a function parameter, "const & T" is better
I doubt that any of these is a real performance problem, but the code is cleaner anyway.
This is a part of bug #8081: Translate cells in
\begin{sideways}...\end{sideways} to native syntax. The turn environment
comes in a later commit, since this one os suitable for backporting.
This is not needed, since LyX supports comments in math. Data loss with math
comments containing a backslash in LyX has been fixed as well.
The test case was found in bug #8104.
I introduced this bug in r40091 where support for empty dates was added.
I also noticed that the title_layout_found flag was not properly passed down
to all variants of parse_text*. Since this is rather a global variable I
placed it into the preamble class.
The test case of bug #8104 shows other problems as well, but those are no
regressions and will be fixed separately.
OK for branch?
It is broken since the latest file format update (neither did Uwe run a test
after updating the file format, nor did I after undoing my accidental change).
The reason it was broken: the bool version of write_attribute() is chosen
for "0" instead of the string version, so each table used rotate="true".
Math commands need it as well as text commands. At the same time, this
further unifies the checking for termination and fixes cases of wrong
output (e.g. for 0x2005).
If \hline is entered, do not create an unknown inset, but increase the number
of hlines of the current row if that is allowed. The same idea is applied to
copy-paste (not part of the bug report).
This is also a test for committing via git.
Setting up .gitignore or .git/info/excludes is something that should
be done. Not doing it makes it a lot harder to see actual new files
that should be added.
Signed-off-by: Lars Gullik Bjønnes <larsbj@gullik.org>
- Parser.cpp: - new function to parse verbatim environments
- test/test-structure.tex: updated example
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@40850 a592a061-630c-0410-9148-cb99ea01b6c8
The type of citation engine is determined by the citation package
being used and, in the case of natbib, its options.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@40593 a592a061-630c-0410-9148-cb99ea01b6c8
tex2lyx does not need a -p command since it detects partial files automatically.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@40591 a592a061-630c-0410-9148-cb99ea01b6c8
from the citation package being used or from a \bibliographystyle
command in the preamble, if any>
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@40499 a592a061-630c-0410-9148-cb99ea01b6c8
now) and move more packages to the new exclude mechanism.
The remaining ones are not so easy.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@40442 a592a061-630c-0410-9148-cb99ea01b6c8
A complete fix is currently impossible because LyX assumes that all longtable
captions are in the first head.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@40361 a592a061-630c-0410-9148-cb99ea01b6c8
registration mechanism, so that they are only swallowed if LyX will load them.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@40315 a592a061-630c-0410-9148-cb99ea01b6c8
If we want to look at the token after the next token, it may be needed
to call tokenize_one() twice and not only once as done in good().
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@40234 a592a061-630c-0410-9148-cb99ea01b6c8
replace home made keyval parsing with the more robust process_keyval_opt().
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@40185 a592a061-630c-0410-9148-cb99ea01b6c8
to occur in pairs.
If you change something in tex2lyx please don't commit without running the
tests and ensuring that no warnings or errors are written on stderr.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@40177 a592a061-630c-0410-9148-cb99ea01b6c8
- support for \makebox
- fix import of boxes without an inner box (the on-screen display was broken because of wrong default width setting)
- fix parsing of \framebox{content}, which LyX does not support yet - we have to use ERT
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@40150 a592a061-630c-0410-9148-cb99ea01b6c8
Of course this will only work if output_changes was true when creating the
.tex file.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@40139 a592a061-630c-0410-9148-cb99ea01b6c8
Also a warning "\end{foo} does not match \begin{bar}" is gone.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@40133 a592a061-630c-0410-9148-cb99ea01b6c8
the complete document whether LyX will load them or not.
Use the mechanism for the color package (fixes the color part of bug #7845).
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@40095 a592a061-630c-0410-9148-cb99ea01b6c8
but the title commands in the preamble are still not recognized.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@40093 a592a061-630c-0410-9148-cb99ea01b6c8
- update preamble to the features used in the file
- add some floats
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@40024 a592a061-630c-0410-9148-cb99ea01b6c8
(info I missed in r39965: beraserif.sty does not exist on CTAN, Bera's sansserif is named "berasans" and is already supported by tex2lyx)
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@39968 a592a061-630c-0410-9148-cb99ea01b6c8
(the tex2lyx support in branch for \printnomenclature is currently broken so this must be backported to branch for 2.0.2, OK Richard?)
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@39960 a592a061-630c-0410-9148-cb99ea01b6c8
- support for box background color, document fontcolor and background color (note_fontcolor was already supported)
- add colors and a nested box to the testfile
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@39949 a592a061-630c-0410-9148-cb99ea01b6c8
406: Convert noweb layouts to new syntax (untested, see bug #7838)
407: Nothing to do (empty lyx2lyx conversion)
408: Activated the already existing script inset code
409: Nothing to do (tex2lyx does not support XeTeX)
410: Nothing to do (the old code already used the new layouts)
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@39923 a592a061-630c-0410-9148-cb99ea01b6c8
402: Nothing to do (tex2lyx does not support bibtotoc)
403: Nothing to do (the old code already used the new layouts, bug #7780)
404: Nothing to do (write new prettyref syntax)
405: Nothing to do (empty lyx2lyx conversion)
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@39920 a592a061-630c-0410-9148-cb99ea01b6c8
400: Convert \lyxline to new InsetLine syntax
401: Nothing to do (empty lyx2lyx conversion)
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@39919 a592a061-630c-0410-9148-cb99ea01b6c8
394: Added use_makebox parameter to InsetBox
395: Nothing to do (empty lyx2lyx conversion)
396: Nothing to do (empty lyx2lyx conversion)
397: Nothing to do (tex2lyx does not support nameref)
398: Nothing to do (empty lyx2lyx conversion)
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@39916 a592a061-630c-0410-9148-cb99ea01b6c8
379: Nothing to do (html output changes)
380: Nothing to do (empty lyx2lyx conversion)
381: Nothing to do (empty lyx2lyx conversion)
382: Activated already prepared notefontcolor code
383: Nothing to do (empty lyx2lyx conversion)
384: Nothing to do (empty lyx2lyx conversion)
385: Nothing to do (empty lyx2lyx conversion)
386: Nothing to do (empty lyx2lyx conversion)
387: Nothing to do (empty lyx2lyx conversion)
388: Nothing to do (empty lyx2lyx conversion)
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@39912 a592a061-630c-0410-9148-cb99ea01b6c8
369: Nothing to do (empty lyx2lyx conversion)
370: Nothing to do (empty lyx2lyx conversion)
371: Added \use_mhchem parameter
372: Nothing to do (empty lyx2lyx conversion)
373: Nothing to do (the old version was wrong since it used the new g-brief
layout files with the old file format)
374: Nothing to do (html output changes)
375: Nothing to do (empty lyx2lyx conversion)
376: Nothing to do (empty lyx2lyx conversion)
377: Nothing to do (empty lyx2lyx conversion)
378: Nothing to do (empty lyx2lyx conversion)
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@39911 a592a061-630c-0410-9148-cb99ea01b6c8
357: Added comment about \underbar and \ulem
358: Nothing to do (empty lyx2lyx conversion)
359: Nothing to do (empty lyx2lyx conversion)
360: Nothing to do (empty lyx2lyx conversion)
361: Nothing to do (empty lyx2lyx conversion)
362: Nothing to do (empty lyx2lyx conversion)
363: Nothing to do (empty lyx2lyx conversion)
364: Nothing to do (empty lyx2lyx conversion)
365: Nothing to do (empty lyx2lyx conversion)
366: Nothing to do (empty lyx2lyx conversion)
367: Nothing to do (empty lyx2lyx conversion)
368: Nothing to do (empty lyx2lyx conversion)
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@39910 a592a061-630c-0410-9148-cb99ea01b6c8
352: New syntax for InsetIndex and printindex command inset
353: Nothing to do (empty lyx2lyx conversion)
354: Nothing to do (empty lyx2lyx conversion)
355: Nothing to do (empty lyx2lyx conversion)
356: Nothing to do (empty lyx2lyx conversion)
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@39897 a592a061-630c-0410-9148-cb99ea01b6c8
346: Nothing to do (swiss german is not supported by babel/polyglossia)
347: Nothing to do (empty lyx2lyx conversion)
348: Nothing to do (empty lyx2lyx conversion)
349: Nothing to do (empty lyx2lyx conversion)
350: Nothing to do (empty lyx2lyx conversion)
351: Nothing to do (empty lyx2lyx conversion)
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@39896 a592a061-630c-0410-9148-cb99ea01b6c8
List environments (as the one in the bug report) can't
be handled correctly in tex2lyx as long as LyX does not allow contents
after the environment start but before the first \item.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@39871 a592a061-630c-0410-9148-cb99ea01b6c8
The init_package before easyParse is necessary to initiate the default
values for userdir and sysdir, which are now part of the help message.
This step would be necessary anyway if we ever internationalize tex2lyx.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@39799 a592a061-630c-0410-9148-cb99ea01b6c8
Read the comment of odocstream in src/support/docstream.h if you want to
know why this fix is correct.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@38335 a592a061-630c-0410-9148-cb99ea01b6c8
through the rc setting \icon_set. Preferences dialog will follow shortly.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@38038 a592a061-630c-0410-9148-cb99ea01b6c8
counting when exporting to latex. This is done for the code comprised
between \begin{document} and \end{document}, while the preamble code
still needs manual calls to TexRow::newline() for registering new lines.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@37584 a592a061-630c-0410-9148-cb99ea01b6c8
If an optional argument can be followed by another one, we need to use
getFullOpt(). Otherwise it would not be possible to parse \foo[][bar].
Remove getOptContent to avoid confusion (it does exactly the same as
getArg('[', ']') which is used in most places.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@37354 a592a061-630c-0410-9148-cb99ea01b6c8
Try to recognize modules.
Again, this is needed because the complete LyX preamble is ignored.
It is not possible to recognize a module in all cases, but at least the simple
ones are handled now. As a prerequisite I also had to revive the filling of
known_environments. This has been removed (probably by accident) some time ago.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@37306 a592a061-630c-0410-9148-cb99ea01b6c8
- translate the arguments of \texorpdfstring, so that the floating footnote
code gets enabled
- honor the ForcePlainLayout flag of insets like the Index inset
- remove hardcoded \url support, this is handled by the general Flex inset code
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@37297 a592a061-630c-0410-9148-cb99ea01b6c8
parser discards all needed packages like calc.sty or framed.sty, so the
resulting document would be uncompilable with those boxes as ERT.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@37287 a592a061-630c-0410-9148-cb99ea01b6c8
accumulate for each round trip, since LyX writes \protect if needed)
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@37214 a592a061-630c-0410-9148-cb99ea01b6c8
LyX would output the parsed stuff unconditionally, so we must not translate
it in LyX document settings.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@37191 a592a061-630c-0410-9148-cb99ea01b6c8
- Add missing babel synonyms (taken from a standard TeXLive 2010 install).
Some synonyms might still be missing (if they are defined not by babel
itself, but additional packages). Adding these is now simple: Only
known_languages and known_coded_languages need to be touched.
- Translate babel language name arguments of \foreignlanguage and
\selectlanguage to LyX names.
- Translate second argument of \foreignlanguage to LyX.
- Cleanup mixed language names in the preamble parser: Now all checks are
done with LyX names, not a mix of babel and LyX names. This sets correct
quotes even if the language as given as an alias.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@37188 a592a061-630c-0410-9148-cb99ea01b6c8
lib/doc/Math.lyx, since tex2lyx swallows the LyX part of the preamble, and
thus \shortcut would not be defined.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@37149 a592a061-630c-0410-9148-cb99ea01b6c8
Fix missing \size reset after sectioning environments.
Fix invalid \lang default (use english instead, as in the preamble)
Convert hard coded layout output of caption insets to Context class.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@37147 a592a061-630c-0410-9148-cb99ea01b6c8
misinterpreting "\}" as "}" when it occured inside a pair of unescaped
braces, like in "\code{@\{*\}r||p\{1in\}@\{*\}}".
The reason for this bug is that Token::character() behaves differently in
tex2lyx than in mathed. See the comment in Parser.h for a more general fix.
For now I played on the safe side and only changed those places where I
definitely know that the old code was wrong.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@37117 a592a061-630c-0410-9148-cb99ea01b6c8
Improve heuristic for outputting \bibliographystyle: Now it is suppressed
if \bibliography follows immediately, since LyX adds it automatically in that
case.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@37066 a592a061-630c-0410-9148-cb99ea01b6c8
- Replace special verbatim commands by standard LaTeX, since it would be
extremely difficult to make tex2lyx understand them)
- Comment duplicated \bibliography{xampl}, since LaTeX cannot handle two
\bibliography calls
- Fix a regression with spaces after commands, introduced in r36943
- Parse \multicolumn with space/comments between two arguments correctly
- Parse optional arguments correctly if there are space or comments between
the command and the argument
- Remove duplicate "LyX" phrase handling (I overlooked that in r37052)
- Add new commands created with \let to the list of known commands. This is
needed to parse the arguments correctly
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@37064 a592a061-630c-0410-9148-cb99ea01b6c8
The automatic replacement in LyX is pretty broken (see bug 4752).
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@37055 a592a061-630c-0410-9148-cb99ea01b6c8
Please don't add new features to tex2lyx without testing.
In this case, the test case was even provided in test-insets.tex.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@37051 a592a061-630c-0410-9148-cb99ea01b6c8
The reasons for doing this in tex2lyx instead of an external script are:
- Correct choice of latex/pdflatex export
- Using the correct LyX executable regardless of running inplace or from an
installation, or with or without version suffix
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@37049 a592a061-630c-0410-9148-cb99ea01b6c8
344: Remove pdf_pagebackref header flag
345: Nothing to do (this is a docbook-only change)
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@37015 a592a061-630c-0410-9148-cb99ea01b6c8
335: Create space inset in new syntax
336: Nothing to do (empty lyx2lyx conversion)
337: Nothing to do (tex2lyx does use the display flag)
338-339: Nothing to do (empty lyx2lyx conversion)
340: Nothing to do (tex2lyx does not output empty layout names)
341-342: Nothing to do (empty lyx2lyx conversion)
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@37013 a592a061-630c-0410-9148-cb99ea01b6c8
331: Set the caption flag for longtable caption rows
332: Nothing to do (empty lyx2lyx conversion)
333: Nothing to do (tex2lyx did already use the new style names because it
uses the current layout files)
334: Nothing to do (tex2lyx did already produce the new format, since it
used the LaTeX paper names also in the output and did not suffer from
bug 4868)
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@37012 a592a061-630c-0410-9148-cb99ea01b6c8
324: Create newline inset in new syntax
325: Nothing to do (tex2lyx does not support the japanese language)
326-327: Nothing to do (empty lyx2lyx conversion)
328: Nothing to do (tex2lyx did never support embedding of files)
329-330: Nothing to do (empty lyx2lyx conversion)
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@37011 a592a061-630c-0410-9148-cb99ea01b6c8
321: Move leftlines/rightlines from column headers to cells
322: Nothing to do (tex2lyx does not produce plain layouts)
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@37009 a592a061-630c-0410-9148-cb99ea01b6c8
- support for \nocite (since format 309)
- add \nocite{*} option to testfile
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@36960 a592a061-630c-0410-9148-cb99ea01b6c8
320: Support protected hfill
Detect other horizontal spaces that are already part of format 319
Add forgotton use_parbox tag to boxes (confuses lyx2lyx, but no lyx)
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@36949 a592a061-630c-0410-9148-cb99ea01b6c8
311: Nothing to do (tex2lyx produced already the new format, because it
uses the current layout files. This is also a reason why it should
not lag behind too much with the format.)
312: Nothing to do (empty lyx2lyx conversion)
313: Nothing to do (tex2lyx does not know about modules)
314-315: Nothing to do (empty lyx2lyx conversion)
316: Nothing to do (tex2lyx does not know subfigures)
317-318: Nothing to do (empty lyx2lyx conversion)
319: Convert horizontal spaces to new format (and convert some newly
supported spaces)
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@36948 a592a061-630c-0410-9148-cb99ea01b6c8
299-302: Nothing to do (empty lyx2lyx conversion)
303: Nothing to do (tex2lyx did not use the serbocroation language)
304: Convert framed and greyed out notes to box insets
305-310: Nothing to do (empty lyx2lyx conversion)
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@36947 a592a061-630c-0410-9148-cb99ea01b6c8
298: All math macros are exported with \\global to LaTeX now, so a \\global
in front of a math macro has to be recognized. Since the math macros do
no longer use the same syntax in .lyx and .tex (which is a mistake IMHO)
an exact match is no longer possible except for \global\long\def.
Bugfix this time: \\providecommand was errornously recognized as math macro
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@36946 a592a061-630c-0410-9148-cb99ea01b6c8
297: new name for upper sorbian language, new languages albanian and lower
sorbian (actually lower sorbias was (incorrectly) already recognized)
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@36945 a592a061-630c-0410-9148-cb99ea01b6c8
- Make test-insets.tex and test-structure.tex compilable
- Avoid duplicate definition of \lyxarrow in test-insets.lyx
- Prevent subscript package from being ignored in test-insets.lyx
- Prevent commands listed with optional arg in syntax.default from being
concatenated with the next word if no optional arg is given
- Handle spaces and comments inbetween a command an "{}" consistently
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@36943 a592a061-630c-0410-9148-cb99ea01b6c8
294: Nothing needed, but add some placeholders to the preamble for documentation
295: Convert URL command inset to Flex inset
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@36941 a592a061-630c-0410-9148-cb99ea01b6c8
289: Use new syntax for index inset
290-291: Nothing to do (empty lyx2lyx conversion)
292: Nothing to do, tex2lyx does not know japanese yet
293: Nothing to do (empty lyx2lyx conversion)
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@36929 a592a061-630c-0410-9148-cb99ea01b6c8
278: Nothing to do, tex2lyx writes already an \end_deeper for each \begin_deeper
279-280: Nothing to do, tex2lyx does not produce character styles yet
281-282: Nothing to do (empty lyx2lyx conversion)
283: Nothing to do, tex2lyx does not produce character styles yet
284-286: Nothing to do (empty lyx2lyx conversion)
287: Nothing to do, tex2lyx does not produce wrapped figures yet
288: Use new syntax for command inset
This time, the (not format related) bug fix is to parse the starred jurabib
and natbib citation commands correctly.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@36927 a592a061-630c-0410-9148-cb99ea01b6c8
Nothing to do, since tex2lyx does not produce the invalid tables.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@36847 a592a061-630c-0410-9148-cb99ea01b6c8
I could reproduce the warnings, and comparing the man output with and without
patch verified that the quotes were completely missing in the old version
while they are OK in the new one.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@36846 a592a061-630c-0410-9148-cb99ea01b6c8
Add support for arabic (arabi package), and two languages that are already
avaiilable in previous formats, but have been forgotten: latvian and lithuanian.
Again, the previous format was not handled correctly:
arabic (arabi) was parsed as arabic (arabtex).
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@36845 a592a061-630c-0410-9148-cb99ea01b6c8
Nothing to do for 274: tex2lyx did not implement the special whitespace
handling that would have been needed for the old format.
Use the scaleBeforeRotation keyword for graphics (275).
This fixes actually a bug with the old version, that implicitly converted
all graphics to scale before rotation.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@36843 a592a061-630c-0410-9148-cb99ea01b6c8
Nothing to do, since lyx2lyx conversions are empty except for version 271,
and tex2lyx already outputs the new format for 271.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@36842 a592a061-630c-0410-9148-cb99ea01b6c8
since they are usually invalid in text mode (partial fix of bug 6797).
Also, prepare proper translation of \\slash{} and \nobreakdash.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@36840 a592a061-630c-0410-9148-cb99ea01b6c8
Since separators are not allowed by the current .lyx version written by
tex2lyx, an empty note is used instead.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@36838 a592a061-630c-0410-9148-cb99ea01b6c8
Also, disable corresponding code for required arguments. tex2lyx does
not produce a high enough file format yet for this to make sense, I
don't think.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@34635 a592a061-630c-0410-9148-cb99ea01b6c8
the OptionalArgs tag does and is implemented by the now misnamed
InsetOptArgs, except that its content gets wrapped in "{}" rather than
"[]". Required arguments do not actually have to be provided, but they
are always output.
This will allow e.g. beamer's Block environment to be implemented
without ERT.
Documentation to follow.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@34591 a592a061-630c-0410-9148-cb99ea01b6c8
elsewhere, but I actually don't know why I put them here in the first
place.
The tex2lyx stuff allows us not to wrap the calls to
frontend::Alert::warning in "#ifdef TEX2LYX" blocks.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@34192 a592a061-630c-0410-9148-cb99ea01b6c8
We have to set the language again when a new paragraph is started. Otherwise the n'th paragraph in a certain language is set to the document language.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@33727 a592a061-630c-0410-9148-cb99ea01b6c8
- proper solution to determine the quotes language
- add Kazakh, that we already support in LyX for ages
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@32476 a592a061-630c-0410-9148-cb99ea01b6c8
Everything is ok while reading the file, but when the lyxfile is written, only the first byte of a double-byte character is written to the file. This is because t.character() is sort of defined as cs_[0] in which cs_ is a docstring. This thus seems to fail for multi-byte characters.
Compare with src\tex2lyx\text.cpp line: 1250.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@32441 a592a061-630c-0410-9148-cb99ea01b6c8
to FontInfo.*
This allows tex2lyx to use the plain FontInfo object (via Layout), and to remove
several '#ifdef TEX2LYX' in the code
Reorder a bit the makefile in tex2lyx
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@31772 a592a061-630c-0410-9148-cb99ea01b6c8
- when languages are given in the documentclass options _and_ the babel options, babel takes the last language option of the \usepackage call
- there is no quote language "ngerman", it is in both cases "german"
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@31685 a592a061-630c-0410-9148-cb99ea01b6c8
This can be seen by trying out the document attached to ticket #6142.
The problem was that handle_opt() is not used only to parse languages,
and thus setting a lang-related bool in there is asking for trouble.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@31440 a592a061-630c-0410-9148-cb99ea01b6c8
assertion when Qt is compiled in debug mode, and simply directly perform
an emergency cleanup when a shutdown event occurs on Windows.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@31029 a592a061-630c-0410-9148-cb99ea01b6c8
