- support for \textdoublevertline, \textvertline, \textglobfall
- support \!o and \!b and \!d and \!g and \!G and \!j
- support and \*k and \*r and \*t and \*w
- register the package "tipa" if \textipa is detected in an equation
- add a \textipa equation to the testfile
(I failed to implement support for the TIPA character "\t*{ }" and the command "\=*".)
- Use the LyX name of encodings instead of the LaTeX names.
The LyX name must be unique, while the name used by LaTeX
not necessarily, e.g. different packages might implement
support for the same encoding.
- Rename koi8 to koi8-r, so that the LyX and LaTeX names match.
- Rename euc-jp-plain to euc-jp-platex, jis-plain to jis-platex
and shift-jis-plain to shift-jis-platex.
- Add utf8-platex encoding (fixes#8408).
LyX file format incremented to 463.
- support for the combining diacritical marks
- support for \texttoptiebar and \textbottomtiebar
- test-insets.lyx: add complete testcase
- TODO.txt: update what still needs to be done
This is achieved by not calling Parse::tokenize_one() anymore in
Parser::good(): The status of the input can be tested without performing the
actual tokenizing. Now there are only two methods that may prevent an encoding
change:next_token() and next_next_token().
This is an addendum to [72a44b3c/lyxgit] because depending on the environment, LyX adds a \phantomsection before \addcontentsline.
- also update the test file
This is an important part of the tests. If updating the test cases is really a
problem there are two better solutions than not testing the format: Convert
the references with lyx2lyx on the fly, or remove the hard coupling of tex2lyx
and LyX versions again. Both increase additional possible error sources, but
these errors could at least be detected. If the test machinery is made blind
for versions, file format errors are impossible to detect.
Jean-Marc discovered a possible data loss caused by Parser::getChar().
This is now fixed, and Parser::getChar() is removed, since it is no longer
needed and easy to use it in the wrong way.
- nothing needs to be done for feyn.sty - it is already recognized as simple feature and the roundtrip using the feynman example file works
- update entry for undertilde to be uniform
When switching catcodes (for example to verbatim), there are in general some tokens that have already been parsed according to the old catcodes. It is therefore needed to "forget" those token and reparse them.
The basic idea is to use idocstream::putback() to feed the characters back to the stream, but this does not work (probably because we disable buffering). Therefore, we implement a simple stream-like class that implements putback().
This is a refactoring commit, which may introduce minor regressions, but should go in the right direction.
* introduce Parser::verbatimEnvironment, which is a wrapper around verbatimStuff
* introduce output_ert, which inserts a string as ERT; this allows to factor out several code instances.
* rename handle_ert to output_ert_inset: this creates an inset and then calls output_ert
* remove handle_comment (use handle_ert instead)
* remove handle_backaspace (unused now)
* use the new methods in handle_listing
TODO:
* use for other verbatim-like cases (Sweave chunk, url...)
* maybe implement Parser::unparse to reparse tokens already parsed with the wrong catcodes (if needed)
- Implement catcode setting in Parser
- add a new Parser::verbatimStuff method that reads verbatim contents
- use this method to parse "verbatim" environment.
- use it to parse \verb too.
- rename Parser::verbatimEnvironment to ertEnvironment.
TODO:
- use for other verbatim-like cases (Sweave chunk, lstlisting...)
- factor out the function that outputs ERT (including line breaks)
- maybe implement Parser::unparse (if needed)
Provide functions for translating to the LyX name
of an encoding from either a LaTeX name or an Iconv
name, with the possibility to specify the package.
This is in anticipation of changing to use the LyX
name of the encoding in the .lyx file format and
allowing multiple lib/encodings entries to have
the same LaTeX name (but different packages!).
The tex2lyx parser needs to worry about the iconv
name of the input encoding, so store that instead
of the latex name.
The old layouts are still there (marked as deprecated). The new ones are more or less correctly reverted (polishment required), but the old ones not yet converted to the new. Once this is done, a further file format change should be made.
These encodings were not defined, since they must not be used as document
encodings (the characters {, } and \ may appear in high bytes, and latex
would be confused). However, they are supported by CJK.sty (which uses a
preprocessor to circumvent the limitations of the latex executable). These
encodings are now defined, but used for import in tex2lyx only.
The test case CJK.tex contained fake tests for shift-jis and big5 (the
japanese and chinese characters were entered using the utf8 encoding), and
therefore the wrong interpretation of these encoding looked as if it worked.
The comments about missing iconv support of shift-jis and big5 were wrong as
well (otherwise shift-jis-plain would not work either).
Actually, the test case showed several problems:
- ERT insets did use layout "Standard", not "Plain Layout"
- The font scale was read correctly, but tex2lyx claimed that it did ignore
the option "scaled=0.95"
- If a third argument of the CJK environment was given, it caused the whole
environment to be put in ERT with a broken encoding. This is now fixed for
the bug test case by using the \font_cjk header variable, but the encoding
problem still exists for unsupported encodings. I'll file a separate bug
for that.
- The CJKutf8 package was not handled in the preamble parsing. Therefore the
chinese comment in the preamble was read with a wrong encoding, and guessing
the document language did not work.
The new file CJKutf8.tex was created by copying and modifying CJK.tex, but
unfortunately it is impossible to tell git to inherit the history of CJK.tex
for the new file (search the web for git svn copy if you want to know details).
Special characters as created by latex_path() where not converted corectly
from LaTeX macros by tex2lyx. Now this is done, even for file names containing
double quotes which are not used for quoting spaces. These file names are not
legal on windows, and will causes probelms in DVI files, but if they occur
tex2lyx does not produce invalid .lyx files.
The fix is basically mechanical, the additional code for fraction like insets
with three arguments was stolen from \unitfrac. As any math package,
stackrel.sty needs a buffer parameter to switch it off.
I also added the two stackrel flavours to the toolbar.
Both problems where caused by the fact that tex2lyx did not handle
natbib/jurabib citations correctly if natbib/jurabib was loaded by the
document class. Therefore it tried to parse the standard \cite syntax, and
did not recognize \citet and \citep.
The \frametitle command is less convenient to use than the \frame argument, but it provides more options (overlay/action and short title). We thus provide this additionally to the option, like beamer itself does.
This has a list-like structure (with \onslide item commands). The previous implementation was rather useless, since it required lots of ERT. Since the new implementation is so different, we use ERT for conersion/reversion.
The lyx2lyx routines are not yet perfect, though.
The stmaryrd package adds support for lots of math symbols, using a font
designed to accompany the computer modern fonts. The changes in detail:
- Fix generate_symbols_list.py to work with stmaryrd.sty. It loooks like it
was automatically translated from a perl version and never used.
- Generate the new symbols in lib/symbols using generate_symbols_list.py and
add some manual adjustments
- Generate stmary10.ttf by a simple ttf export from stmary10.sfd with fontforge
- Add license info for stmary10.ttf
- Create a test file with all symbols from stmaryrd.sty. Actually it would be
nice to have this for the other fonts as well.
- The mechanics: lyx2lyx, tex2lyx, font machinery etc.
This patch puts all projects into subfolders (at least for MSVS). In this
way, there is a better overview (especially if the number of test projects
will be increasing).
Now that we have module support for literate programming, it is possible to do a noweb cleanup. This is basically a patch from Kayvan Sylvan:
- get rid of literate-xxx classes
- rename Scrap to Chunk, since this is the name noweb doc uses (Scrap is from nuweb)
- update lyx file format and add lyx2lyx support for gettting rid of literate-xxx classes
- update documentation
On the top of it, update tex2lyx to
- avoid creating files with literate-xxx class
- fix conflict between parsing << as a quote and parsing it as a Chunk
- create Chunk layouts instead of Scrap ones.
Actually tex2lyx can handle modules since some time (#5702), but not
theorems (#5776). Now the following issues are fixed:
- Modules that depend on other modules can be loaded, since the dependencies
are loaded first
- Default moduls of the text class are loaded correctly
- \newtheorem is recognized as a command that defines new environments and
treated similar to \newenvironment
With this new command line switch a list of modules can be loaded
unconditionally. This seems to be needed for the literate programming formats,
and it is useful to work around bug #5702 as well.
The listings inset does automatically load the color package if any parameter
contains \color. As mentioned in bug #8066 tex2lyx needs to be aware of this,
so the \usepckage{color} is automatically skipped in these cases.
Creating LYX_DATE dynamically at configure-time caused unwanted recompilation
of the whole directories (src + src/tex2lyx) because all the relevant objects
were dependent of a common file (flags.make in case of "Unix makefiles") which changed
accordingly.
There is now a new include (lyx_date.h, with only one definition)
Nothing changes for automake, since in this case LYX_DATE is defined in config.h
s is a valid horizontal position for framebox (as well as for makebox, which
was already parsed correctly). There was even a test case, but with a wrong
reference.
Instead of annoying the user with an automatically created note in the output
document which she needs to delete manually, determine the document language
automatically for documents that use CJK. This is done using a heuristic which
roughly counts the number of characters in each language and sets the one that
is used most often. This is not perfect, but it works for the two major use
cases: A document with only some CJK parts (in this case the babel language is
used), and a document which is mainly written in one CJK language. It is only
a minor problem if the heuristic is wrong, since the TeX export is still
correct, and there is no spell checking support for CJK anyway.
Now all regression tests do pass except for some relative path issues
depending on the location of the build directory.
The previous output was read correctly by LyX as well, but the new version is
more similar to the files written by LyX. Also update TODO with recent file
format changes.
Commit 7cfac95 got rid of empty lines that were created by removing \usepackage
statements. However, it added an additional newline in case the \usepackage
was not at the end of the line. This is now fixed.
The old fix was incomplete (\verb~\~ was translated to \verb~~ in roundtrip).
The real cause for this bug (and also the mistranslation of \href{...}{\}})
was the misbehaviour of Token::character() (see comment in Parser.h): This
method even returns a character if the category is catEscape, and this is not
wanted in most (all?) cases.
If this option is given, included files will be copied to the output directory.
Also -roundtrip is now allowed with given output file.
-copyfiles is useful if you want to ensure that no file (not even an included
one) is overwritten by a subsequent export from LyX. Both changes are needed
for unit tests that do not write to the source directory.
The input and output file names of tex2lyx may be relative. In this case,
getMasterFilePath() and getParentFilePath() return relative paths as well.
Now the file name translation logic for all kinds of included files can
cope with that.
If there was an encoding set by the inputenc package, it must not be ignored.
Now all tex2lyx test cases can be exported to .tex again by LyX (although
there are still some differences in the .lyx output).
It is invoked by 'make check' (automake only, it would be nice if someone
could add it to cmake as well), or by calling
python src/tex2lyx/test/runtests.py <path to tex2lyx binary>
by hand. Currently, it does not compare the output (this comes later).
The added .lyx files are from tex2lyx around mid of april, so that you
can see the regressions of the current version if you run the test
yourself (simply run git diff afterwards).
The home made test runner is quite stupid, but better than nothing.
Feel free to improve it or replace it with something better, as long
as running it stays as simple as now.
- tex2lyx/text.cpp:
- fix bug that swallowed valid braces
- the encoding is "Bg5" not "BIG5"
- add and update comments
- CJK.tex: add an example for the Bg5 encoding
- Preamble.cpp/:
- move list definition out of anon namespace
- declare lists and a function in the class
- text.cpp: remove the now already defined list
- Parser.cpp: \verb can have any character as delimiter (except of ASCII letters) not only '+', therefore partly revert [3943b887/lyxgit] and fix it for all cases
Preamble.cpp:
- support the font scaling
- improve coding style
text.cpp: - improve logic/coding style
XeTeX-polyglossia.tex:
- add scaling
- change document so that it is compilable using the Libertine font
Instead of adding the extra '\n' to tex2lyx, we should remove it from
BufferParams.cpp because it was introduced there unintendedly in d7eaaba9
(Juergen Spitzmueller; "support for CJK font argument"; Jun 5 2008).
This partly reverts commit c2810f922665c591a7c32d4c679e58e55132505a.
Fix commit [aa9fed93/lyxgit]: it is never a good idea to call substr(4) on a string without checking its length. Moreover, it is even better in this case to check that the first letters are "text" as the reminder of the code assumes...
- tex2lyx/Preamble.cpp/h: not all new header definitions since fileformat 413 have yet been added to texl2yx, so do it now; also change some new default values
- bugfix for the parsing of polyglossia's paragraph environments
- new support for polyglossia's language change commands \textxxx
- XeTeX-polyglossia.tex: add more testcases and add a missing \end
objects. The problem that led to the leak is that these objects can be held in
memory long after the Buffer that created them is gone, mostly due to their
use in the CutStack. So they were previously held in a storage facility, the
DocumentClassBundle. Unfortunately, they were now being created too often,
especially by cloning. It's not really a leak, because they're accessible, but
we weren't ever destroying them.
This new approach uses a shared_ptr instead.
Thanks to Vincent for pointing out const_pointer_cast.
While cppcheck did not turn out any suspicious error messages, using
the "performance" flag highlighted several nitpicks in three categories
* do not use it++ for iterators, ++it is better
* do not use size() to test for emptyness, empty() is here
* do not use "const T" as a function parameter, "const & T" is better
I doubt that any of these is a real performance problem, but the code is cleaner anyway.
This is a part of bug #8081: Translate cells in
\begin{sideways}...\end{sideways} to native syntax. The turn environment
comes in a later commit, since this one os suitable for backporting.
This is not needed, since LyX supports comments in math. Data loss with math
comments containing a backslash in LyX has been fixed as well.
The test case was found in bug #8104.
I introduced this bug in r40091 where support for empty dates was added.
I also noticed that the title_layout_found flag was not properly passed down
to all variants of parse_text*. Since this is rather a global variable I
placed it into the preamble class.
The test case of bug #8104 shows other problems as well, but those are no
regressions and will be fixed separately.
OK for branch?
It is broken since the latest file format update (neither did Uwe run a test
after updating the file format, nor did I after undoing my accidental change).
The reason it was broken: the bool version of write_attribute() is chosen
for "0" instead of the string version, so each table used rotate="true".
Math commands need it as well as text commands. At the same time, this
further unifies the checking for termination and fixes cases of wrong
output (e.g. for 0x2005).
If \hline is entered, do not create an unknown inset, but increase the number
of hlines of the current row if that is allowed. The same idea is applied to
copy-paste (not part of the bug report).
This is also a test for committing via git.
Setting up .gitignore or .git/info/excludes is something that should
be done. Not doing it makes it a lot harder to see actual new files
that should be added.
Signed-off-by: Lars Gullik Bjønnes <larsbj@gullik.org>
- Parser.cpp: - new function to parse verbatim environments
- test/test-structure.tex: updated example
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@40850 a592a061-630c-0410-9148-cb99ea01b6c8
The type of citation engine is determined by the citation package
being used and, in the case of natbib, its options.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@40593 a592a061-630c-0410-9148-cb99ea01b6c8
tex2lyx does not need a -p command since it detects partial files automatically.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@40591 a592a061-630c-0410-9148-cb99ea01b6c8
from the citation package being used or from a \bibliographystyle
command in the preamble, if any>
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@40499 a592a061-630c-0410-9148-cb99ea01b6c8
now) and move more packages to the new exclude mechanism.
The remaining ones are not so easy.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@40442 a592a061-630c-0410-9148-cb99ea01b6c8
A complete fix is currently impossible because LyX assumes that all longtable
captions are in the first head.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@40361 a592a061-630c-0410-9148-cb99ea01b6c8
registration mechanism, so that they are only swallowed if LyX will load them.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@40315 a592a061-630c-0410-9148-cb99ea01b6c8
If we want to look at the token after the next token, it may be needed
to call tokenize_one() twice and not only once as done in good().
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@40234 a592a061-630c-0410-9148-cb99ea01b6c8
replace home made keyval parsing with the more robust process_keyval_opt().
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@40185 a592a061-630c-0410-9148-cb99ea01b6c8
to occur in pairs.
If you change something in tex2lyx please don't commit without running the
tests and ensuring that no warnings or errors are written on stderr.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@40177 a592a061-630c-0410-9148-cb99ea01b6c8
- support for \makebox
- fix import of boxes without an inner box (the on-screen display was broken because of wrong default width setting)
- fix parsing of \framebox{content}, which LyX does not support yet - we have to use ERT
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@40150 a592a061-630c-0410-9148-cb99ea01b6c8
Of course this will only work if output_changes was true when creating the
.tex file.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@40139 a592a061-630c-0410-9148-cb99ea01b6c8
Also a warning "\end{foo} does not match \begin{bar}" is gone.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@40133 a592a061-630c-0410-9148-cb99ea01b6c8
the complete document whether LyX will load them or not.
Use the mechanism for the color package (fixes the color part of bug #7845).
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@40095 a592a061-630c-0410-9148-cb99ea01b6c8
but the title commands in the preamble are still not recognized.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@40093 a592a061-630c-0410-9148-cb99ea01b6c8
- update preamble to the features used in the file
- add some floats
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@40024 a592a061-630c-0410-9148-cb99ea01b6c8
(info I missed in r39965: beraserif.sty does not exist on CTAN, Bera's sansserif is named "berasans" and is already supported by tex2lyx)
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@39968 a592a061-630c-0410-9148-cb99ea01b6c8
(the tex2lyx support in branch for \printnomenclature is currently broken so this must be backported to branch for 2.0.2, OK Richard?)
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@39960 a592a061-630c-0410-9148-cb99ea01b6c8
- support for box background color, document fontcolor and background color (note_fontcolor was already supported)
- add colors and a nested box to the testfile
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@39949 a592a061-630c-0410-9148-cb99ea01b6c8
406: Convert noweb layouts to new syntax (untested, see bug #7838)
407: Nothing to do (empty lyx2lyx conversion)
408: Activated the already existing script inset code
409: Nothing to do (tex2lyx does not support XeTeX)
410: Nothing to do (the old code already used the new layouts)
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@39923 a592a061-630c-0410-9148-cb99ea01b6c8
402: Nothing to do (tex2lyx does not support bibtotoc)
403: Nothing to do (the old code already used the new layouts, bug #7780)
404: Nothing to do (write new prettyref syntax)
405: Nothing to do (empty lyx2lyx conversion)
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@39920 a592a061-630c-0410-9148-cb99ea01b6c8
400: Convert \lyxline to new InsetLine syntax
401: Nothing to do (empty lyx2lyx conversion)
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@39919 a592a061-630c-0410-9148-cb99ea01b6c8
394: Added use_makebox parameter to InsetBox
395: Nothing to do (empty lyx2lyx conversion)
396: Nothing to do (empty lyx2lyx conversion)
397: Nothing to do (tex2lyx does not support nameref)
398: Nothing to do (empty lyx2lyx conversion)
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@39916 a592a061-630c-0410-9148-cb99ea01b6c8
379: Nothing to do (html output changes)
380: Nothing to do (empty lyx2lyx conversion)
381: Nothing to do (empty lyx2lyx conversion)
382: Activated already prepared notefontcolor code
383: Nothing to do (empty lyx2lyx conversion)
384: Nothing to do (empty lyx2lyx conversion)
385: Nothing to do (empty lyx2lyx conversion)
386: Nothing to do (empty lyx2lyx conversion)
387: Nothing to do (empty lyx2lyx conversion)
388: Nothing to do (empty lyx2lyx conversion)
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@39912 a592a061-630c-0410-9148-cb99ea01b6c8
369: Nothing to do (empty lyx2lyx conversion)
370: Nothing to do (empty lyx2lyx conversion)
371: Added \use_mhchem parameter
372: Nothing to do (empty lyx2lyx conversion)
373: Nothing to do (the old version was wrong since it used the new g-brief
layout files with the old file format)
374: Nothing to do (html output changes)
375: Nothing to do (empty lyx2lyx conversion)
376: Nothing to do (empty lyx2lyx conversion)
377: Nothing to do (empty lyx2lyx conversion)
378: Nothing to do (empty lyx2lyx conversion)
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@39911 a592a061-630c-0410-9148-cb99ea01b6c8
357: Added comment about \underbar and \ulem
358: Nothing to do (empty lyx2lyx conversion)
359: Nothing to do (empty lyx2lyx conversion)
360: Nothing to do (empty lyx2lyx conversion)
361: Nothing to do (empty lyx2lyx conversion)
362: Nothing to do (empty lyx2lyx conversion)
363: Nothing to do (empty lyx2lyx conversion)
364: Nothing to do (empty lyx2lyx conversion)
365: Nothing to do (empty lyx2lyx conversion)
366: Nothing to do (empty lyx2lyx conversion)
367: Nothing to do (empty lyx2lyx conversion)
368: Nothing to do (empty lyx2lyx conversion)
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@39910 a592a061-630c-0410-9148-cb99ea01b6c8
352: New syntax for InsetIndex and printindex command inset
353: Nothing to do (empty lyx2lyx conversion)
354: Nothing to do (empty lyx2lyx conversion)
355: Nothing to do (empty lyx2lyx conversion)
356: Nothing to do (empty lyx2lyx conversion)
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@39897 a592a061-630c-0410-9148-cb99ea01b6c8
346: Nothing to do (swiss german is not supported by babel/polyglossia)
347: Nothing to do (empty lyx2lyx conversion)
348: Nothing to do (empty lyx2lyx conversion)
349: Nothing to do (empty lyx2lyx conversion)
350: Nothing to do (empty lyx2lyx conversion)
351: Nothing to do (empty lyx2lyx conversion)
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@39896 a592a061-630c-0410-9148-cb99ea01b6c8
List environments (as the one in the bug report) can't
be handled correctly in tex2lyx as long as LyX does not allow contents
after the environment start but before the first \item.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@39871 a592a061-630c-0410-9148-cb99ea01b6c8
The init_package before easyParse is necessary to initiate the default
values for userdir and sysdir, which are now part of the help message.
This step would be necessary anyway if we ever internationalize tex2lyx.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@39799 a592a061-630c-0410-9148-cb99ea01b6c8
Read the comment of odocstream in src/support/docstream.h if you want to
know why this fix is correct.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@38335 a592a061-630c-0410-9148-cb99ea01b6c8
through the rc setting \icon_set. Preferences dialog will follow shortly.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@38038 a592a061-630c-0410-9148-cb99ea01b6c8
counting when exporting to latex. This is done for the code comprised
between \begin{document} and \end{document}, while the preamble code
still needs manual calls to TexRow::newline() for registering new lines.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@37584 a592a061-630c-0410-9148-cb99ea01b6c8
If an optional argument can be followed by another one, we need to use
getFullOpt(). Otherwise it would not be possible to parse \foo[][bar].
Remove getOptContent to avoid confusion (it does exactly the same as
getArg('[', ']') which is used in most places.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@37354 a592a061-630c-0410-9148-cb99ea01b6c8
Try to recognize modules.
Again, this is needed because the complete LyX preamble is ignored.
It is not possible to recognize a module in all cases, but at least the simple
ones are handled now. As a prerequisite I also had to revive the filling of
known_environments. This has been removed (probably by accident) some time ago.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@37306 a592a061-630c-0410-9148-cb99ea01b6c8
- translate the arguments of \texorpdfstring, so that the floating footnote
code gets enabled
- honor the ForcePlainLayout flag of insets like the Index inset
- remove hardcoded \url support, this is handled by the general Flex inset code
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@37297 a592a061-630c-0410-9148-cb99ea01b6c8
parser discards all needed packages like calc.sty or framed.sty, so the
resulting document would be uncompilable with those boxes as ERT.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@37287 a592a061-630c-0410-9148-cb99ea01b6c8
accumulate for each round trip, since LyX writes \protect if needed)
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@37214 a592a061-630c-0410-9148-cb99ea01b6c8
LyX would output the parsed stuff unconditionally, so we must not translate
it in LyX document settings.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@37191 a592a061-630c-0410-9148-cb99ea01b6c8
- Add missing babel synonyms (taken from a standard TeXLive 2010 install).
Some synonyms might still be missing (if they are defined not by babel
itself, but additional packages). Adding these is now simple: Only
known_languages and known_coded_languages need to be touched.
- Translate babel language name arguments of \foreignlanguage and
\selectlanguage to LyX names.
- Translate second argument of \foreignlanguage to LyX.
- Cleanup mixed language names in the preamble parser: Now all checks are
done with LyX names, not a mix of babel and LyX names. This sets correct
quotes even if the language as given as an alias.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@37188 a592a061-630c-0410-9148-cb99ea01b6c8
lib/doc/Math.lyx, since tex2lyx swallows the LyX part of the preamble, and
thus \shortcut would not be defined.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@37149 a592a061-630c-0410-9148-cb99ea01b6c8
Fix missing \size reset after sectioning environments.
Fix invalid \lang default (use english instead, as in the preamble)
Convert hard coded layout output of caption insets to Context class.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@37147 a592a061-630c-0410-9148-cb99ea01b6c8
misinterpreting "\}" as "}" when it occured inside a pair of unescaped
braces, like in "\code{@\{*\}r||p\{1in\}@\{*\}}".
The reason for this bug is that Token::character() behaves differently in
tex2lyx than in mathed. See the comment in Parser.h for a more general fix.
For now I played on the safe side and only changed those places where I
definitely know that the old code was wrong.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@37117 a592a061-630c-0410-9148-cb99ea01b6c8
Improve heuristic for outputting \bibliographystyle: Now it is suppressed
if \bibliography follows immediately, since LyX adds it automatically in that
case.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@37066 a592a061-630c-0410-9148-cb99ea01b6c8
- Replace special verbatim commands by standard LaTeX, since it would be
extremely difficult to make tex2lyx understand them)
- Comment duplicated \bibliography{xampl}, since LaTeX cannot handle two
\bibliography calls
- Fix a regression with spaces after commands, introduced in r36943
- Parse \multicolumn with space/comments between two arguments correctly
- Parse optional arguments correctly if there are space or comments between
the command and the argument
- Remove duplicate "LyX" phrase handling (I overlooked that in r37052)
- Add new commands created with \let to the list of known commands. This is
needed to parse the arguments correctly
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@37064 a592a061-630c-0410-9148-cb99ea01b6c8
The automatic replacement in LyX is pretty broken (see bug 4752).
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@37055 a592a061-630c-0410-9148-cb99ea01b6c8
Please don't add new features to tex2lyx without testing.
In this case, the test case was even provided in test-insets.tex.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@37051 a592a061-630c-0410-9148-cb99ea01b6c8
The reasons for doing this in tex2lyx instead of an external script are:
- Correct choice of latex/pdflatex export
- Using the correct LyX executable regardless of running inplace or from an
installation, or with or without version suffix
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@37049 a592a061-630c-0410-9148-cb99ea01b6c8
344: Remove pdf_pagebackref header flag
345: Nothing to do (this is a docbook-only change)
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@37015 a592a061-630c-0410-9148-cb99ea01b6c8
335: Create space inset in new syntax
336: Nothing to do (empty lyx2lyx conversion)
337: Nothing to do (tex2lyx does use the display flag)
338-339: Nothing to do (empty lyx2lyx conversion)
340: Nothing to do (tex2lyx does not output empty layout names)
341-342: Nothing to do (empty lyx2lyx conversion)
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@37013 a592a061-630c-0410-9148-cb99ea01b6c8
331: Set the caption flag for longtable caption rows
332: Nothing to do (empty lyx2lyx conversion)
333: Nothing to do (tex2lyx did already use the new style names because it
uses the current layout files)
334: Nothing to do (tex2lyx did already produce the new format, since it
used the LaTeX paper names also in the output and did not suffer from
bug 4868)
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@37012 a592a061-630c-0410-9148-cb99ea01b6c8
324: Create newline inset in new syntax
325: Nothing to do (tex2lyx does not support the japanese language)
326-327: Nothing to do (empty lyx2lyx conversion)
328: Nothing to do (tex2lyx did never support embedding of files)
329-330: Nothing to do (empty lyx2lyx conversion)
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@37011 a592a061-630c-0410-9148-cb99ea01b6c8
321: Move leftlines/rightlines from column headers to cells
322: Nothing to do (tex2lyx does not produce plain layouts)
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@37009 a592a061-630c-0410-9148-cb99ea01b6c8
- support for \nocite (since format 309)
- add \nocite{*} option to testfile
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@36960 a592a061-630c-0410-9148-cb99ea01b6c8
320: Support protected hfill
Detect other horizontal spaces that are already part of format 319
Add forgotton use_parbox tag to boxes (confuses lyx2lyx, but no lyx)
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@36949 a592a061-630c-0410-9148-cb99ea01b6c8
311: Nothing to do (tex2lyx produced already the new format, because it
uses the current layout files. This is also a reason why it should
not lag behind too much with the format.)
312: Nothing to do (empty lyx2lyx conversion)
313: Nothing to do (tex2lyx does not know about modules)
314-315: Nothing to do (empty lyx2lyx conversion)
316: Nothing to do (tex2lyx does not know subfigures)
317-318: Nothing to do (empty lyx2lyx conversion)
319: Convert horizontal spaces to new format (and convert some newly
supported spaces)
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@36948 a592a061-630c-0410-9148-cb99ea01b6c8
299-302: Nothing to do (empty lyx2lyx conversion)
303: Nothing to do (tex2lyx did not use the serbocroation language)
304: Convert framed and greyed out notes to box insets
305-310: Nothing to do (empty lyx2lyx conversion)
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@36947 a592a061-630c-0410-9148-cb99ea01b6c8
298: All math macros are exported with \\global to LaTeX now, so a \\global
in front of a math macro has to be recognized. Since the math macros do
no longer use the same syntax in .lyx and .tex (which is a mistake IMHO)
an exact match is no longer possible except for \global\long\def.
Bugfix this time: \\providecommand was errornously recognized as math macro
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@36946 a592a061-630c-0410-9148-cb99ea01b6c8
297: new name for upper sorbian language, new languages albanian and lower
sorbian (actually lower sorbias was (incorrectly) already recognized)
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@36945 a592a061-630c-0410-9148-cb99ea01b6c8
- Make test-insets.tex and test-structure.tex compilable
- Avoid duplicate definition of \lyxarrow in test-insets.lyx
- Prevent subscript package from being ignored in test-insets.lyx
- Prevent commands listed with optional arg in syntax.default from being
concatenated with the next word if no optional arg is given
- Handle spaces and comments inbetween a command an "{}" consistently
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@36943 a592a061-630c-0410-9148-cb99ea01b6c8
294: Nothing needed, but add some placeholders to the preamble for documentation
295: Convert URL command inset to Flex inset
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@36941 a592a061-630c-0410-9148-cb99ea01b6c8
289: Use new syntax for index inset
290-291: Nothing to do (empty lyx2lyx conversion)
292: Nothing to do, tex2lyx does not know japanese yet
293: Nothing to do (empty lyx2lyx conversion)
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@36929 a592a061-630c-0410-9148-cb99ea01b6c8
278: Nothing to do, tex2lyx writes already an \end_deeper for each \begin_deeper
279-280: Nothing to do, tex2lyx does not produce character styles yet
281-282: Nothing to do (empty lyx2lyx conversion)
283: Nothing to do, tex2lyx does not produce character styles yet
284-286: Nothing to do (empty lyx2lyx conversion)
287: Nothing to do, tex2lyx does not produce wrapped figures yet
288: Use new syntax for command inset
This time, the (not format related) bug fix is to parse the starred jurabib
and natbib citation commands correctly.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@36927 a592a061-630c-0410-9148-cb99ea01b6c8
Nothing to do, since tex2lyx does not produce the invalid tables.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@36847 a592a061-630c-0410-9148-cb99ea01b6c8
I could reproduce the warnings, and comparing the man output with and without
patch verified that the quotes were completely missing in the old version
while they are OK in the new one.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@36846 a592a061-630c-0410-9148-cb99ea01b6c8
Add support for arabic (arabi package), and two languages that are already
avaiilable in previous formats, but have been forgotten: latvian and lithuanian.
Again, the previous format was not handled correctly:
arabic (arabi) was parsed as arabic (arabtex).
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@36845 a592a061-630c-0410-9148-cb99ea01b6c8
Nothing to do for 274: tex2lyx did not implement the special whitespace
handling that would have been needed for the old format.
Use the scaleBeforeRotation keyword for graphics (275).
This fixes actually a bug with the old version, that implicitly converted
all graphics to scale before rotation.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@36843 a592a061-630c-0410-9148-cb99ea01b6c8
Nothing to do, since lyx2lyx conversions are empty except for version 271,
and tex2lyx already outputs the new format for 271.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@36842 a592a061-630c-0410-9148-cb99ea01b6c8
since they are usually invalid in text mode (partial fix of bug 6797).
Also, prepare proper translation of \\slash{} and \nobreakdash.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@36840 a592a061-630c-0410-9148-cb99ea01b6c8
Since separators are not allowed by the current .lyx version written by
tex2lyx, an empty note is used instead.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@36838 a592a061-630c-0410-9148-cb99ea01b6c8
Also, disable corresponding code for required arguments. tex2lyx does
not produce a high enough file format yet for this to make sense, I
don't think.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@34635 a592a061-630c-0410-9148-cb99ea01b6c8
the OptionalArgs tag does and is implemented by the now misnamed
InsetOptArgs, except that its content gets wrapped in "{}" rather than
"[]". Required arguments do not actually have to be provided, but they
are always output.
This will allow e.g. beamer's Block environment to be implemented
without ERT.
Documentation to follow.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@34591 a592a061-630c-0410-9148-cb99ea01b6c8
elsewhere, but I actually don't know why I put them here in the first
place.
The tex2lyx stuff allows us not to wrap the calls to
frontend::Alert::warning in "#ifdef TEX2LYX" blocks.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@34192 a592a061-630c-0410-9148-cb99ea01b6c8
We have to set the language again when a new paragraph is started. Otherwise the n'th paragraph in a certain language is set to the document language.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@33727 a592a061-630c-0410-9148-cb99ea01b6c8
- proper solution to determine the quotes language
- add Kazakh, that we already support in LyX for ages
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@32476 a592a061-630c-0410-9148-cb99ea01b6c8
Everything is ok while reading the file, but when the lyxfile is written, only the first byte of a double-byte character is written to the file. This is because t.character() is sort of defined as cs_[0] in which cs_ is a docstring. This thus seems to fail for multi-byte characters.
Compare with src\tex2lyx\text.cpp line: 1250.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@32441 a592a061-630c-0410-9148-cb99ea01b6c8
to FontInfo.*
This allows tex2lyx to use the plain FontInfo object (via Layout), and to remove
several '#ifdef TEX2LYX' in the code
Reorder a bit the makefile in tex2lyx
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@31772 a592a061-630c-0410-9148-cb99ea01b6c8
- when languages are given in the documentclass options _and_ the babel options, babel takes the last language option of the \usepackage call
- there is no quote language "ngerman", it is in both cases "german"
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@31685 a592a061-630c-0410-9148-cb99ea01b6c8
This can be seen by trying out the document attached to ticket #6142.
The problem was that handle_opt() is not used only to parse languages,
and thus setting a lang-related bool in there is asking for trouble.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@31440 a592a061-630c-0410-9148-cb99ea01b6c8
assertion when Qt is compiled in debug mode, and simply directly perform
an emergency cleanup when a shutdown event occurs on Windows.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@31029 a592a061-630c-0410-9148-cb99ea01b6c8
- better whitespace preamble output (still not perfect)
- support for fileformat 258
- proper solution how to treat LyX specific preamble stuff; this solves long standing issues (the old solution failed when more than one LyX specific command was used in a file)
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@30103 a592a061-630c-0410-9148-cb99ea01b6c8
- the code for \clear***page was already there
- tex2lyx allows already to use any input encoding
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@30096 a592a061-630c-0410-9148-cb99ea01b6c8
- correct the conversion of InsetCommand
- code optimization
- support for format 253: nomenclature is now recognized
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@30093 a592a061-630c-0410-9148-cb99ea01b6c8
- support for url, varioref, prettyref
- reduce the sometimes huge amount of whitespace in the preamble after importing files
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@30058 a592a061-630c-0410-9148-cb99ea01b6c8
Make several Parser methods return copies of tokens, because the
vector containing the token may get reallocated when it grows.
Revert now useless changeset 29557.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@29627 a592a061-630c-0410-9148-cb99ea01b6c8
DVI viewer passes back the resolved path, such that the search fails,
as internally LyX uses the unresolved path.
This patch fixes this bug by using the new method FileName::realPath
which resolves a path by getting rid of any '.', '..', or symlink
path components.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@29476 a592a061-630c-0410-9148-cb99ea01b6c8
The problem was that \" was forgotten in the list of accents to check
in unicodesymbols (because it used to have its own german-centric derogatory
handling).
I took the Comprehensive LaTeX Symbols List (table 6) and added all the
missing accents.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@29387 a592a061-630c-0410-9148-cb99ea01b6c8
- make it autogenerated
- clean up the markup
- remove obsolete information
- try to update in general
Hopefully I did not break the markup...
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@28871 a592a061-630c-0410-9148-cb99ea01b6c8
- fix thinko that caused tex2lyx to silently drop custom preamble entries in non-LyX-generated tex files.
(bug 5788). Patch from Jean-Marc.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@28567 a592a061-630c-0410-9148-cb99ea01b6c8
available to tex2lyx. The point is to move the crucial routines that
deal with modules out of BufferParams.cpp, which tex2lyx does not have,
and into TextClass.cpp, which it does.
This is all cleanup that makes a lot of sense independently.
Note that LayoutModuleList will shortly become a real class.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@28456 a592a061-630c-0410-9148-cb99ea01b6c8
This is overridden by any subsequent inputenc command.
The current encoding is also passed down to \input or \included files.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@28295 a592a061-630c-0410-9148-cb99ea01b6c8
as accents. Time will tell how robust this is.
All support for InsetLatexAccent has been removed.
I did not do the support for \inputencoding yet, because it is more difficult
to get right...
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@27596 a592a061-630c-0410-9148-cb99ea01b6c8
What works:
- parsing of inputenc should work
- \inputencoding is acted on in the preamble
What does not work:
- \inputencoding in the text
- all the corner cases I have not considered, and all buggy stuff in the
'what works' paragraph
- InsetLatexAccent are still created, but I do not know when they got added
to the code.
The only notable trick in the code is that I had to disable buffering. Otherwise
the whole text was read before I had a chance to change the encoding...
Finally I remove the artificial limitation that forbid
\usepackage[opt1,opt2]{package1,package2}
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@27592 a592a061-630c-0410-9148-cb99ea01b6c8
read utf8 tex documents and translate them to lyxformat 249.
There is still no code to discover the encoding and use it, but it is the
easiest part (I hope).
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@27563 a592a061-630c-0410-9148-cb99ea01b6c8
Instead, new token are read when requested. The idea from now is
to be able to chenge encoding on the fly.
Now it is time to see whether idocstream actually works...
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@27489 a592a061-630c-0410-9148-cb99ea01b6c8
* autogen.sh: use autopoint to poulate the gettext code; simplify.
* po/Rules-lyx: move the LyX-specific code of the Makefile here.
* configure.ac: add magic incantation telling autopoint to import
gettext 0.16.1. Generate config.h in toplevel directory to please
gettext.
* src/tex2lyx/Makefile.am:
* src/client/Messages.cpp: compile fix
* remove all files that came from a gettext distribution.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@25167 a592a061-630c-0410-9148-cb99ea01b6c8
- tey2lyx\test-structure.tex: add paper size document class option for testing
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@24791 a592a061-630c-0410-9148-cb99ea01b6c8
* Context.cpp (begin_layout): make it a (private) method, and output
the extra stuff here.
(add_par_extra_stuff): this is used for stuff that is only for next
paragraph (like extra_stuff used to be); add_extra_stuff is now for
code that is output for all paragraphs in the context.
* text.cpp: update to new Context methods. Every user of add_extra_stuff
uses add_par_extra_stuff, except alignment (which has to be repeated
to fix bug 4806).
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@24656 a592a061-630c-0410-9148-cb99ea01b6c8
The reverted features could (and should) be reapplied as soon as tex2lyx can output unicode (bug 4379).
The patch of this change can be found here:
http://bugzilla.lyx.org/show_bug.cgi?id=4379
and can be applied with -R in this case.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@24557 a592a061-630c-0410-9148-cb99ea01b6c8
- fix an off by one error in the font size handling, fixes bug 4803
- support \lyxline, fixes bug 4795
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@24518 a592a061-630c-0410-9148-cb99ea01b6c8
- box-color.tex: testfile for tex2lyx to check if colors and boxes are correctly imported
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@24403 a592a061-630c-0410-9148-cb99ea01b6c8
- make the man page a bit less outdated (bug 2770).
note that the page isn't really up to date yet. I didn't check anything thoroughly (especially the "what's supported" and "what's not supported" part). Uwe, maybe a job for you, as you are most familiar with it nowadays.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@24386 a592a061-630c-0410-9148-cb99ea01b6c8
Abdel suggested it might be worth pimpl'ing the FloatList and Counter objects, to get the header dependencies back down.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@23530 a592a061-630c-0410-9148-cb99ea01b6c8
We take the opportunity to make TextClass objects noncopyable, nonassignable, etc.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@23526 a592a061-630c-0410-9148-cb99ea01b6c8
At this point, there are no simple TextClass objects in the main LyX code, and it is impossible to create them, since the TextClass constructor is protected. Only LayoutFile and DocumentClass objects can be constructed, and for the most part these are constructed only by their respective containers: BaseClassList and DocumentClassBundle. There is an exception: LayoutFile does have a public default constructor, but if anyone knows how to make it go away, please do.
There will be one or two more commits along these lines, but these will be simple renamings. For example, BaseClassList should be LayoutFileList.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@23343 a592a061-630c-0410-9148-cb99ea01b6c8
\makeatother and \makeatletter are already added by LyX around the user preamble
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@22027 a592a061-630c-0410-9148-cb99ea01b6c8
Now support/* should have no dependencies on src/* anymore.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@21851 a592a061-630c-0410-9148-cb99ea01b6c8
tex2lyx Version 0.1.5
Commands
- support for \lyxline
- fix for bug 27:
- support for \selectlanguage
- support for \foreignlanguage
- support for \inputencoding
- updated support for \printindex
- support for \printnomenclature
- updated support for \listof
- updated support for \tableofcontents
Environments
- support for hyperlink
- support for shaded note
- support for framed note
Preamble
- support for font settings
- updated preamble format to lyxformat 303
(tex2lyx will still use lyxformat 245 for a while)
- updated language support
- support for multi-language documents that use babel
(CJK follows later)
- fix bug 2310:
- support for document encoding
Packages
- support for esint
- updated support for amsmath
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@21813 a592a061-630c-0410-9148-cb99ea01b6c8
- fileformat change
- tex2lyx support
- rename LFUN_BREAK_LINE to LFUN_NEW_LINE because this is what the lfun does and to avoid confusions
- new menu entry
- new shortcut C-S-Return
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@21778 a592a061-630c-0410-9148-cb99ea01b6c8
introduce isReadableDirectory
replace isReadable by either isReadableFile or isReadableDirectory
remove isReadable
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@21769 a592a061-630c-0410-9148-cb99ea01b6c8
- support for \newline
- support for framed and shaded notes
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@21764 a592a061-630c-0410-9148-cb99ea01b6c8
- rename former "pagebreak" to "newpage" since it produces a \newpage
- new LFUN
- menu entry
- tex2lyx support
- fileformat change
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@21732 a592a061-630c-0410-9148-cb99ea01b6c8
Would be nice if people tested read/write, and Bo perhaps the 'embedded'
feature?
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@21492 a592a061-630c-0410-9148-cb99ea01b6c8
* Font::FontBits -> FontInfo
* Font::FONT_XXX -> all enums transfered to FontEnums.h and renamed to FontXxx
I've replaced Font uses with FontInfo were the language() member was not needed, basically all draw() and metrics methods. There's one problematic cases with InsetQuotes which I solved by taking the Buffer main language.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@21240 a592a061-630c-0410-9148-cb99ea01b6c8
- rename the lfun to href-insert.png
- rename the files to Hyperlink...
- the former URLUi produces now \href commands (hyperref)
Only missing thing is the lyx2lyx conversion routine - this will be done by Richard
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@20950 a592a061-630c-0410-9148-cb99ea01b6c8
- Modifier on return type ignored
- Ambigous else
- Ambigous logical operators
- Semi-colon instead of empty block
- Missing header files
- Missing using std::XX
- Initialization out of order
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@20304 a592a061-630c-0410-9148-cb99ea01b6c8
* Layout.h:
- name_, obsoleted_by_, depends_on_ are now docstrings.
All other changes results from the above string -> docstring changes. In particular, we now try to translate the layout names only if possible (i.e. if they are ASCII only).
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@19042 a592a061-630c-0410-9148-cb99ea01b6c8
updated to support format >= 257 (with InsetCaption).
* src/Layout.cpp (forCaption): new method. Returns a pointer to a newly
allocated Layout suitable for representing a caption.
* src/tex2lyx/tex2lyx.cpp (tex2lyx): allocate a captionlayout object
* src/tex2lyx/text.cpp: use the captionlayout object to recognize the
\caption command.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@18962 a592a061-630c-0410-9148-cb99ea01b6c8
- use internal_path (bug 3788), patch by Hangzai Luo and me).
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@18953 a592a061-630c-0410-9148-cb99ea01b6c8
if they are compatible (i.e. no optional arguments, no patterns)
* Recursive macros are also imported, but they only work correctly in the
limits of the current macro implementation in LyX
* Fixes http://bugzilla.lyx.org/show_bug.cgi?id=21
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@18483 a592a061-630c-0410-9148-cb99ea01b6c8
\input{foo} means to input foo.tex, so add the .tex extension.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@18470 a592a061-630c-0410-9148-cb99ea01b6c8
Remove all explicit 8bit characters from the source, to fix compilation
with windows xp under a chinese locale (bug 3496).
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@18256 a592a061-630c-0410-9148-cb99ea01b6c8
